XCBL Documents

Does Oracle B2B 11g support xCBL Documents? Does Oracle provide any samples?

in case of ebXML we have refToMessageId to handle correlation. How to handle correlation in case of xCBL?Content based correlation is possible at middleware. Oracle B2B leverages correlation functionality provided by document protocols, like ebMS (Correlation ID), and RosettaNet PIP
how does Oracle B2B handle unique messages and avoid duplicates for xCBL documents?In case of outbound, this is back-end application which generates the message id and hence uniqueness logic should be handled there. In case of inbound, by default Oracle B2B takes care of uniqueness of messages. It works on the basis of message id. Oracle B2B gets the message ID from the exchange layer and makes sure that it has not received any messages with the same message ID earlier. To disable the inbound duplicate check, you may set property b2b.checkDuplicate to false in EM.
We have Outbound purchase order in IDOC format. Can B2B transform/transalate from IDOC to xCBL directly or Do we need to implement this translation through the mediation composite of SOA SCA?This translation should be done at middleware.
for ebXML we have ebMS, for xCBL do we have any specificaion that a MSH should abide to?I do not think so and that's why xCBL should be implemented as custom document in Oracle B2B. Let us know if you have any specific requirement and we will be more than happy to help you out, in implementing the same.
Regards,
Anuj

Similar Messages

  • Message Correlation - Content Based - xCBL documents

    Hello B2B Gurus
    We have xCBL documents being exchanged between trading partners, How do you correlate messages?
    1. I have also refered to the following tutorials which refers to "Message Correlation End to End"
    http://www.oracle.com/technetwork/testcontent/b2b-tu-001-b2b-bpel-133467.pdf
    2. technical note on "IP_MESSAGE_TYPE"
    http://www.oracle.com/technetwork/testcontent/b2b-tn-008-ip-message-type-129343.pdf
    Can you please explain for a Purchase Order scenario how does Content Based message correlation occur?
    Thanks

    You need to provide appropriate Xpath's in Correlation tab of Document Definition. Stay tuned and soon I should post more details here.
    Regards,
    Anuj

  • SAP Marketplace Adapter

    I apologize if this is not the correct forum for this, but all I'm trying to find out is whether the SAP Marketplace Adapter (when used with PI) is able to output xCBL 3.5 and/or 3.0 documents inside MML envelopes, as well as receive and consume xCBL documents inside MML.

    Hi,
      The Marketplace Adapter sends MML document. The content of this MML are made through mapping programs, for instance, if you have a purchase scenario like this: SAP MM -> PI -> Marketplace, you could send an ORDER Idoc to SAP PI, SAP PI make the IDOC transformation to xCbl 3.5 and finally you send this data to marketplace through Marketplace Adapter (MML Format).
       The receiver scenario can use xCbl structure as well.
       The marketplace adapter only create the MML document.
       SAP Business Connector was a better tool for Marketplace communication than SAP PI.
    Regards
    Ivá

  • Generates a SAP Invoice IDOC based on xCBL Invoice document

    Hi Experts,
    I am looking for code to generate invoice through XCBL to SAP Invoice IDOC.
    Could anyone post where I can get this code in stylesheet..
    Please help me.

    svraju wrote:
    Thnks for ur reply..But is there any stylesheet mapping avaibale for this because we want to do in XSLT.
    >
    > Please help me..
    dont think there are any standard mappings available for this.
    you might want to get the logic from your functional contact/business and build the mapping.
    I think it will ideally fit within the graphical mapping itself

  • XCBL-ordermanagement

    Hi,
    I have an scenario to      R/3 --> PI mapping --> xCBL (PO document) vendor/partners
    xCBL  Purchase Order document and map it to an ORDERS05 IDOC.
    Has anybody been able to import the xCBL schema ordermanagement.xsd into XI?
    I can import the schema from http://xcbl.org , but it does not show any Messages. It includes hundreds of other schemas and I think it is not feasible to import all of them manually.I tried with versions 4.0 and 3.0 but the same problem persists in 3.0 order.xsd
    I am trying to approach by message mapping.If there are any possibility of using xslt mappings please guide me through.
    Thanks In advance,
    Sudhansu
    Edited by: Sudhansukumar Behera on Mar 5, 2009 12:50 PM

    Has anybody been able to import the xCBL schema ordermanagement.xsd into XI?
    Yes
    The problem should be related to xsd:import statement in the xCBL xsds. PI doesn't support this. You may require to change it to include statement. Then you need to ensure that all the referenced xsds are imported under external definition before you import this xsd.
    Regards,
    Prateek

  • SRM 4.0: Standard xCBL scenario for PO

    Hello,
    I need o send my POs from SRM in xCBL 3.5 format.
    Does anybody know about a standard scenario for SRM in XI to do so ?
    Regards.
    Vadim

    Hi Vadim,
    If you won't find any info about a standard scenario
    you can always map PO into xcbl message:
    http://www.xcbl.org/xcbl35/documentation.html
    since this is an XML document it can be done send by a receiver file/ftp adapter 
    Regards,
    michal

  • Sample XML/XCBL for marketsite

    Hello!
    Can anyone copy and paste a sample Orders XML/XCBL that is sent from XI (Marketplace) adapter and successfully processed in the destination?
    Currently, the output sent by XI does not seem to want to get successfully processed in the marketsite. I have a hunch that there might be something wrong with the output, but I'm not so sure what that might be.
    Below is the beginning of the XML XI sends right now:
    <i>  <?soxtype urn:x-commerceone:document:com:commerceone:XCBL35:XCBL35.sox$1.0?>
      <?import urn:x-commerceone:document:com:commerceone:XCBL35:XCBL35.sox$1.0?>
    - <Order>
    - <OrderHeader>
    - <OrderNumber>
      <BuyerOrderNumber>4020015600</BuyerOrderNumber>
      </OrderNumber>
      <OrderIssueDate>20070810T10:45:40+45:40</OrderIssueDate>
    - <OrderReferences>
    - <AccountCode></i>
    If anyone out there can paste a valid XML output destined for a marketsite here in the forums, it would be such a big help!
    Thanks in advance!
    Glenn

    Stuart,
    I have dealt with the issue you mentioned as a bug with DcGroupRef. In fact, it is not a bug but a misinterpretation of the WS. Those fields you mentioned are a part of Test Plan measurement collection (MeasureGroup and MeasureName fields in particular). However, if you check the database, Test Plan measurement values are collected to a separate table which is not processed by WS at all, however, the WS pushes the data to the table used by DC500. And within this context, DcGroupRef is the must.
    I have rectified such situation at one customer by manually adding the values to the incomplete records. They used to collect the data in such way as of ME 5.0 or even earlier by means of Prod XML.
    Implementation of WS in 5.2 and 6.0 are completely different, especially taking into account switching to usage of PAPI.
    So, it is not a bug but a feature not implemented yet.
    And with that, I'm taking over the ticket.
    Regards,
    Sergiy

  • Error while resetting a cleared document

    Hi everyone,
    I am getting an error while resetting a cleared invoicing document 'Document xxxxxxxxxxx with origin R4 can not be reversed'. Please guide me how can we reset the clearing of this document.
    Thanks and Regards

    Hi,
    You need to reset all clearing for the corresponding FICA document for the print document.
    Reset the clearing for the document no. mentioned in the output for EA13 execution.
    You need to reset all the clearing for the document, before reversing the same.
    To get all the clearing document, go to DFKKOP table, enter the FICA document no. (for the print document on FPL9). Get all AUGBL documents,
    Alternatively, you can go on to FPL9 screen, double click on the consumption document, in the basic data you will see the clearing date (if it is cleared), expand the view their (click on + sign), you will se the clearing document no,
    Pass the above clearing document no, to FP07, and once all the clearing is reset for the invoice, you can reverse the corresponding invoice through EA13.
    Regards,
    Rajesh Popat

  • Filename in document

    Hi all,
    Just new to Mac so I've to learn a lot.
    How can I insert the filename (semi)automaticly into the document.
    I have a template document and save this as .... I want the filename to appear in the document.
    Is this possible?? If yes HOW

    As far as I know, we are in a forum dedicated to Numbers '09
    For Numbers v1.0.2, you take care of what was posted several times:
    go to my iDisk:
    <http://idisk.me.com/koenigyvan-Public?view=web>
    and download for free
    For_iWork:iWork '08:forNumbers:paste_thename.zip
    and or
    For_iWork:iWork '08:forNumbers:paste_thepath.zip
    Yvan KOENIG (from FRANCE mercredi 21 janvier 2009 17:56:54)

  • I can't save downloads to documents folder, only to desktop...

    Only desktop saves are allowed.  The message states, "Word cannot save or create this file.  This disk may be full or write protected..." The disk isn't full, so I'm not sure what to do.  I'm having to save everything to the desktop and then move files into document folders in Finder.  Any advice on how to save directly to documents or what may be wrong?   Thanks so much!.

    Back up all data now.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. You can demote it back to standard status when this step has been completed.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Drag or copy — do not type — the following line into the Terminal window, then press return:
    sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
    Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
    In the Terminal window, type this:
    resetpassword
    That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • Downloads to documents folder fail due to parallel upload

    Hi, mobile documents is a great tool that I use to replicate all business relevant documents to mobile clients. However there is one great disadvantage for me. When you download a file that is a bit larger (>1 MB), during the download the client will already start uploading the temporary file. So the download then fails as it cannot convert the temporary file into the final one.
    This is something that does not happen for equivalent clients (for example skydrive). Do you think this is something that can be fixed?
    thanks,
    Heiko

    Hi Heiko,
    Let me explain again:
    You said "uploader locks the file so that it can no longer be changed". For the temporary file it is the downloader which have locked the file. Hence, the impression that file is getting uploaded because it is locked is hence not correct.
    The next version might be available in Q1\Q2 2014. We will keep everyone updated via community.
    Best Regards,
    Ashwani Kr Sharma

  • How do I use the Japanese fonts in Font Book in a Pages document?

    How does one use the Japanese fonts in Font Book in a Pages document. Pages has its own fonts but I cannot get the Japanese fonts into it.

    To type japanese on a computer you change the keyboard, not the font.  Go to system prefs/keyboard/input sources and add Japanese/Kotoeri to the list, then select Hiragana in the "flag" menu at the top right of the screen, then type.  The font will take care of itself.
    http://redcocoon.org/cab/mysoft.html
    If you have any further questions, just ask.

  • 7515 ios 8 scanning doesn't function using document feeder

    My AiO remote updated on my iPad today and i have issues scanning from the scanner. The printer and tablet functions properly when scanning using the glass however when using the document feeder, AiO remote scans the sheets then before saving it says there is a problem with the scanner, check the scanner. not sure why it works with the glass and NOT with the feeder.

    I am having the exact same problem. I will add that scanning from the document feeder to my Mac Book works fine. The problem with the document feeder is only whenn atttempting to use the AiO software on my iPad.

  • I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

    I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

    The application Acrobat provides no language translation capability.
    If you localize the language for OS, MS Office applications, Acrobat, etc to the desired language try again.
    Alternative: transfer a copy of content into a web based translation service (Bing or Google provides a free service).
    Transfer the output into a word processing program that is localized to the appropriate language.
    Do cleanup.
    Be well...

  • Previewing Pages document in Preview shows page numbers incorrectly

    Previewing Pages (5.2) document in Preview (7.0) shows page numbers incorrectly. Regardless of starting page number preview shows as Page 1.
    Suggestions appreciated...

    That appears to be YABIP5 (Yet Another Bug In Pages 5].
    Pages .09 documents are fine.
    No prizes however for finding bugs in Pages 5/5.2 it's swarming with them.
    Peter

Maybe you are looking for