Xcelsius can't use transfer the default date to web service

Hi all visitors
i created one web service that use store procedure.
in my store has 2 parameters( shopcode,MonthYear),so in web method, i also create two parameters too(shopcode,MonthYear).
for xcelsius, i create one calender( for MonthYear param) and the default month is "April/2011 and the default of shopcode is "s01". when the dashboard load the the first time, it doesn't show any data to my listview. but if i input that parameters to the store procedure, the store will show 20 record. and in dashboard, after load i change the default shopcode "s01' to "s02", it will show the data of shop2 "s02" and i change from shop2 "s02" to shop1"s01",It will show 20 records the same with store.
The problem is when the dashboard load at the first time even the default shopcode and MonthYear are right, It can't show the data.
Anybody know about this? This i of WebService or Dashboard?

Hi Chamnan Heng,
It seems your connection refreshes before those values (s01, date) are populating in the binded cells.
For this you can use a alternate method.
add a connection refresh button.
Set that button to refresh your web service connection.then,
(ii)Connection button`s properties>behaviour>Trigger behaviour check the "Refresh after components Are loaded "check box.
regards,
Sriramvijay.R

Similar Messages

Can we use receiver enhancement feature for a web service scenario?

Hi Experts,
We have to send across an invoice to web service enabled legacy system from ECC.
ECC>ABAP Proxy>SAP PI>SOAP Adapter>Legacy System1
ECC>ABAP Proxy>SAP PI>SOAP Adapter>Legacy System2
Requirement is like if the invoice number starts with 1A, it should go to Legacy System1 & if the invoice number starts with 2A, it should go to Legacy System2.
Can we do it in one single scenario using receiver enhancement and if yes How?
Regards
Nidhi Kukreja

You can make use of the XPATH function starts-with(string1,string2) and customize your condition as shown in this blog:
/people/shabarish.vijayakumar/blog/2006/06/07/customise-your-xpath-expressions-in-receiver-determination
Update:
It can even be done without using any XPATH function.....just make use of the option Contains Pattern from the dropdown available for the Middle Operand....right operand will be 1A*
Regards,
Abhishek.
Edited by: abhishek salvi on Feb 3, 2010 1:00 PM

How to transfer the transactional dat a using ale

hi to all abap gurus
i heard that we can transfer the transactional data ( like so data , po data ) using message control technique by ale technology . . can u please give all steps in message control technique with one exapmle . i searched in the forum but i did not get answer . pls points will be rewrared for good answers. if u want to give links pls give exact links .

Hi ,
here is the configuration.
MESSAGE CONTROL (USING EDI / ALE)
For Purchase order (Message control using EDI and message type ORDERS) STEPS
Settings to be done in the Sending system
From NACE
Choose Application EF ( Purchase order), press on condition record
Output type NEU Purchase order / double click ;choose Purchasing output determination:Doc type/purc org/vendor . Key in the data (Purchasing doc type NB, Purc organisation 0001, Venor vendor11) execute. Key in the data (vendor vendor11, name name1, partner function - VN, Partner Vendor11,Medium 6 (EDI), time 4(send immediately), language EN).
Press on output types , choose NEU Purchase order, double click, Access sequence 0001(doctype/purcorg/vendor) tick mark the access to condition, go to default values (dispatch time send immediately, Transmission medium EDI, Partner function VN)
Create RFC destination from SM59 (ZNARA_ALE_EDI).
Create a port from ZNARA_ALE.
Create partner profile vendor11 under LI and not LS. PARTNER NUMBER SHOULD BE SAME AS THAT OF VENDOR SET IN THE CONDITION TYPE.
In the outbond parameters of the partner profile Vendor11 key in the data (Reciever port -> ZNARA_ALE,
Basic type ORDERS05, Message type ORDERS ) Go to the message control and key in the data (Application EF, Message type NEU, Process code ME10, Transfer immediately )
Create a purchase order from ME21 with data (Purchasing doc type NB, Purc organisation 0001, Venor vendor11). System will generate an outbond Idoc automatically which can be seen from WE02.
For Purchase order (Message control using ALE and Message type ORDERS) - STEPS
To transfer the idoc from Client 555 to 500
Settings do be done in 555.
From NACE
Choose Application EF Purchase order, press on condition record
Output type NEU Purchase order / double click ;choose Purchasing output determination:Doc type/purc org/vendor . Key in the data (Purchasing doc type NB, Purc organisation 0001, Venor vendor11) execute. Key in the data (vendor vendor11, name name1, partner function - VN, Partner Vendor11,Medium A (ALE), time 4(send immediately), language EN).
Press on output types , choose NEU Purchase order, double click, Access sequence 0001(doctype/purcorg/vendor) tick mark the access to condition, go to default values (dispatch time send immediately, Transmission medium ALE, Partner function VN)
From SALE create two logical systems and assign them to the respective clients (ZALERECV_N 500, ZALESEND_N 555).
From SM59 create RFC destination with the same name as that of the receiving logical system (ZALERECV_N).
From BD 64(distribution model), create a model view with Technical name ZNARA_PO (message type ORDERS, Sender ZALESEND_N, Receiver ZALERECV_N). Generate partner profiles. Distribute.
Note that partner profile will be generated under LS.
Settings do be done in 500.
From NACE create two logical systems and assign them to the respective clients (ZALERECV_N 500, ZALESEND_N 555).
From BD 64(distribution model), keep the cursor on Technical name ZNARA_PO. Generate partner profiles. Note that partner profile will be generated under LS. Change the process code to ORDE in the inbond parameters .
Now in client 555, Create a purchase order from ME21 with data (Purchasing doc type NB, Purc organisation 0001, Venor vendor11). System will generate an outbond Idoc automatically which can be seen from WE02. The purchase order details will be updated in 555 thru the inbond idoc.
IMP data for message control in Sales order creation.
Partner profile to be created under KU.
Outbond parameters in the partner profile (Message type ORDRSP, Basic type ORDERS02, partner profile - SP) In Message control (Application V1, Message type BA00, Process code SD10)
Notes:
Check the entries in the NAST table to see whether outbond idoc has been created successfully or not
If you have choosen collect idocs in the partner profile, use trans code BD87 to process them
Table EDP13 - Partner Profile: Outbound (technical parameters)
Table EDP21 - Partner Profile: Inbond (technical parameters)
Please reward if useful.

My computer that my iphone 4 is backed up on crashed... I bought a new computer as well as the iphone 5. How can transfer the my data/pics/notes/songs etc to my new phone?

My computer that my iphone 4 is backed up on crashed... I bought a new computer as well as the iphone 5. How can transfer the my data/pics/notes/songs etc to my new phone?

Use the backup you have of the old computer and restore that data to the new computer. Also and backups that you have made of your iTunes library (it has a method to back it up as well) can be copied back over to the new computer. If you attempt to sync the phone to the new computer without the data, it will delete that data from the phone. The iPhone is not designed as a storage/backup device and as such will not sync music from itself to a new computer.
If by chance you had not been backing up the computer and/or iTunes, you can google for some third party software, such as Touchcopy that will do some of what you are asking.

Can you use SQL as a data source for a project in the same way you can in Excel?

Excel allows you to create a data source that executes a SQL stored procedure, display that data as a table in a spreadsheet and have that data automatically refresh each time you open the spreadsheet. Is it possible to do the same thing in MS Project, displaying
the data from the stored procedure as a series of tasks?
Here's what I'm trying to do - I have a stored procedure that pulls task data meeting a specific criteria from all projects in Project Server. We're currently displaying this data as an Excel report. However, the data includes start dates and durations so
it would be nice to be able to display it as a Gantt Chart. I've played around with creating a Gantt chart in Excel and have been able to do a very basic one, but it doesn’t quite fit our needs.

No, You can not use sql as a data source for a project.
You have 3 options to achieve it:
1. You can create a Sharepoint list with desired column ,fill desired data in that list then you can create a MS project from Sharepoint List.
2. You can create a SSRS report in which you can display grantt chart Joe has given you that link.
3. You can write a macro in MPP which will take data from your excel. In excel you will fetch data from your stored procedure. write a schedule which will run every day to update your data or
create an excel report in which will update automatically and write macro in mpp which will fetch the data then publish it so that it would be available to team members.
kirtesh

Date Format in Zreport similar to the default date format set using su01.

Dear All,
            I have a requirement as to change the date format in Zreport as the one which is set in default date format for the user in Su01 tcode.
Ex.. If the user has set the default date format in SU01 as ' YYYY-MM-DD' , in report also, date should appear as '2009-12-24'.
Is there any code or Function Module to change the date format in report as in the default Date format?
Can u help me in this?
Bye.....
Cheers
Christina.

Try the following code.
select the format of current user from usr01 table.
    SELECT SINGLE datfm FROM usr01
    INTO w_datfm
    WHERE bname = sy-uname.
Format based upon the current user settings. put this total code inside one form for reusability.
    IF w_datfm = '1'.
      CONCATENATE w_date6(2) c_dot w_date4(2) c_dot w_date+0(4) INTO outtab-value.
      CONDENSE outtab-value NO-GAPS.
      CONCATENATE w_rundate6(4) w_rundate3(2) w_rundate+0(2) INTO w_date.
      CONDENSE w_date NO-GAPS.
    ELSEIF w_datfm = '2'.
      CONCATENATE w_date4(2) '/' w_date6(2) '/' w_date+0(4) INTO outtab-value.
      CONDENSE outtab-value NO-GAPS.
      CONCATENATE w_rundate6(4) w_rundate0(2) w_rundate+3(2) INTO w_date.
      CONDENSE w_date.
    ELSEIF w_datfm = '3'.
      CONCATENATE w_date4(2) '-' w_date6(2) '-' w_date+0(4) INTO outtab-value.
      CONDENSE outtab-value NO-GAPS.
      CONCATENATE w_rundate6(4) w_rundate0(2) w_rundate+3(2) INTO w_date.
      CONDENSE w_date.
    ELSEIF w_datfm = '4'.
      CONCATENATE w_date0(4) '-' w_date4(2) '-' w_date+6(2) INTO outtab-value.
      CONDENSE outtab-value NO-GAPS.
      CONCATENATE w_rundate0(4) w_rundate5(2) w_rundate+8(2) INTO w_date.
      CONDENSE w_date NO-GAPS.
    ELSEIF w_datfm = '5'.
      CONCATENATE w_date0(4) '/' w_date4(2) '/' w_date+6(2) INTO outtab-value.
      CONDENSE outtab-value NO-GAPS.
      CONCATENATE w_rundate0(4) w_rundate5(2) w_rundate+8(2) INTO w_date.
      CONDENSE w_date NO-GAPS.
    ENDIF.

Can I use LabVIEW to load data directly into system memory? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Win32 function to read the data from the card and now I want it to go directly to system memory.

Can I use LabVIEW to load data directly into system memory from a VI? The serial card I'm using isn't supported by NI nor does VISA recognize it. I'm using a Call Library function to read the data from the card and now I want it to go directly to system memory.
The data is being received at 1Mbps.
Thanks

Two questions:
One, if it's a serial card, then presumably it gives you more serial ports, like COM3, COM4, etc. If so, VISA would see the COM ports, and not the card directly. The drivers for the card should make it so that you see the extra serial ports from the OS. If you don't see the extra COM ports from VISA, then it sounds like the drivers for the card are not installed properly. Do the extra COM ports show up in Device Manager?
Two, you said that you're using a Call Library function to get the data and you want to put it into system memory. Errr.... you just read the data and you have it in memory by definition. Are you saying you need a way to parse the data so it shows up on a graph or something?

10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help.

10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help. I really just need mail file and desktop files recovered.

If data were on the SSD drive with TRIM - practically no chance. If HDD - use DIY recovery software such as DiskDrill or DataResue.
As quickly as possible turn off the drive where deleted data.
Use an external HDD with installed OSX for data recovery.
Alex
Apple Certified Support Professional

Using the default date for presentation variable

In the report I want to use the default date for the presentation variable.
If I use the query like below,default value is giving correctly.but if I pass the date value from dashboard prompt it is throwing error
Anybody help me to modify the below
query to get the valid results?
Timestampadd(SQL_TSI_day,(dayofmonth(date @{asdf}{date '1900-01-01'})*-1)+1,date @{asdf}{date '1900-01-01'})
Edited by: user12255470 on Dec 2, 2010 12:11 PM
Edited by: user12255470 on Dec 2, 2010 12:12 PM

try this:
Timestampadd(SQL_TSI_day,(dayofmonth(date '@{asdf}{1900-01-01}')*-1)+1,date '@{asdf}{1900-01-01}')
mark answers promptly.
J
-bifacts
http://www.obinotes.com
Edited by: bifacts on Dec 2, 2010 3:21 PM

HT201699 My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

My carrier is Straight Talk (using ATT network) and they require the user to enter the APN settings in order to access their data network. My Iphone 4s is factory unlocked but I can not get to the Cellular Data Network tab to enter the settings?

Yes ATT hides the APN settings so when you try to use a st sim it automatically reads on AT&T network so the APN settings are hidden and cannot be accessed however you can go to apn.straighttalk.com on you'r phone and select APN/data settings then select AT&T then iPhone and a screen will pop up asking if you would like to install the profile for whatever reason it's not verified but works fine. You can also go to www.unlockit.co.nz and set up a straight talk APN profile that is verified not sure exactly what that means but both work to get the data working on the phone for straight talk but it does not make the MMS work. There are a couple other methods I have read about one is on howardforums using ibackupbot to manually change the files on the phone I haven't been able to get mine to stick using that method but other people have and there is a sim swap method to trick the phone to reveal APN settings using a tmobile sim I have not tried this but other people have with success. The last two methods mentioned will make both data and MMS work

HT1551 When I try to use the radio app on Apple tv, it tells me it can't connect with the default server. Can use Netflix and other apps. What should I do?

Just hooked up my Apple tv. Got Netflix and other apps to work, but when I use the radio app, it tells me it can't connect to the default server. What should I do?

Anybody? Just installed my new ATV and everytime I go select a radio station it spins and spins and spins - then when I go back to th emenu and then back into the radio to try again I get "Could not connect to "DEFAULT_SERVER" seems pretty specific!? I had no such problems with my ATV v1 I just ebayed!!
PS. I am logged in with correct ID and can acces pretty much everything else

How to change the default date in Person assignment tab?

Hi experts,
Does anyone know how to change the default date in person assignment tab in cj20n? Currently, the system always take the scheduled finish date to the date of the person assignment tab. Can I change it to the start date?
Thanks and rgs,
Michelle

Hi Michelle,
Goto SPRO->Project system->Dates->Scheduling->Specify Parameters for Network Scheduling, Here you can control the workforce planning dates.
Hope this is useful...
Regards
Aatish

Can I over-ride the default setting in Organizer to allow sorting photos by filename ?

I am converting slides from the 1970's and 80's to digital files and using PSE 8 to Organize them but it is important to me that they stay in the order of the file name I give them and NOT "Date: newest first or last" because it would seem that PSE, in the absence of metafile information, uses the date and time I uploaded the file to the Organizer as the "Date:". ACDSee has a much more sensible arrangement in giving me full control of how my photos are sorted. I am being driven to using ACDSee as the organizer and PSE as the photo editor, a not very convenient arrangement. So my question is, "Can I over-ride the default setting in Organizer to allow sorting photos by filename ?"

The type of file system that you're trying to set up, is actually done better by creating you own file heirarchy in Windows, and then viewing by import batch. For example; you might create a top level folder "My Slide Scans", then perhaps, "My son John". So, the scans of john all go in the same folder, you import the folder in one batch, and you're where you want to be.
That said, PSE will fight you at every turn to do this, since with the scanner hooked up with PSE, PSE is going to want to store your photos in "scanned photos" and import them as you scan them.
I woud suggest this. After the scan and import, use PSE to move the photos to their final destination folder, say " Hawaii 1994", and create a tag of the same name". Then when you're done scanning photos of this event, use the tag to view all the scans at once. Then, delete all the photos from the organizer. (Yeah, sounds radical I know). Take heart! All you've gotta do then is to reimport the whole folder. All the same name photos will be in one import batch. And with all the photos of any given topic in one folder, you'll be able to also use Windows Explorer in any number of modes to view the photos outside PSE.
Keep in mind you can rename batchs of photos by selecting them, or by import batch or even tag, then "Ctrl. > Shift > N" will bring up the name change dialog box.
This technique is quite contensious, but, it makes a whole lot more sense than storing all your photos in the "My Photos" folder on the "C:/" drive where any viral or malware hiccup might cause the necessity of a reformat, which could cause the loss of years of work.
If a name search is a priority, that would be "Ctrl ."Shift" > "K" then type in whatever your heart desires.
Caution: Before attempting a delete/ reimport manuver, Alway, always, write the tag and file info to the photo. "File" >"Write Tag and Properties Info to File".
I always am quite adamantine about suggesting that you do NOT use the same physical HDD that contains Windows to store your photos, that's just asking for trouble. HDDs are quite cheap nowadays, and they're worth every penny in piece of mind. Plus to use a storage ("Volume") drive, you have to create your own file heirarchy anyway, so that leads right back to the beginning of this discussion.

I'm moving an internal hard drive from an old computer to a new computer. How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

I'm moving an internal hard drive from an old computer to a new computer. (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer? Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

How can I pre-define the default selection in a SelectOneChoice?

How can I pre-define the default selection in a SelectOneChoice?
(1) Here's my JSF-code:
<af:selectOneChoice label="#{res['usercreate.input.sex']}"
value="#{bindings.Sex.inputValue}"
binding="#{SelectListBean.sexlist}"
readOnly="false" autoSubmit="false">
<af:selectItem label="#{res['data.sex.women']}" value="1"/>
<af:selectItem label="#{res['data.sex.man']}" value="2"/>
</af:selectOneChoice>
(2): manged bean: to set the default value to be the first in the list, my managed bean as follows:
import oracle.adf.view.faces.component.core.input.CoreSelectOneChoice;
public class MBSListBean {
private CoreSelectOneChoice sexlist;
public MBSListBean() {
public void setSexlist(CoreSelectOneChoice sexlist) {
this.sexlist = sexlist;
this.sexlist.setValue(1);
public CoreSelectOneChoice getSexlist() {
return sexlist;
(3) when i launch the page, it often gives me such warnings:
WARNUNG: Could not find selected item matching value "1" in CoreSelectOneChoice[UIXEditableFacesBeanImpl, id=_id7]
how to solve the problem ?
Thanks,
wzzdx

You could also set the default on your entity or viewobject, in the properties of your attribute.

Xcelsius can't use transfer the default date to web service

Similar Messages

Maybe you are looking for