Xcelsius integration in Web Dynpro ABAP

Hi experts,
I am trying to develop a chip page with Xcelsius; but, when I try to put my Xcelsius, not appear nothin.
I do some test, and I check:
Problem with the file GenericXcelsiusIsland_2008_30.swf; I can not find it, but I download the file GenericXcelsiusIsland_2008.swf (in the WebDynpro /BCV/WDC_UIF_DISPLAY_XC), I rename it and I upload it. Now, appear an error with the file xlf; I upload too. Now, not appear errors, but it does not show the flash.
Any idea?
Thanks in advance,
Regards.

Hi Victor,
I have the same issue. Did you manage to find a solution for this ?
Br,
Sergiu

Similar Messages

Integration a Web Dynpro ABAP application within one of my EP overview page

Hi Experts,
I've got an issue when integrating a Web Dynpro ABAP application within one of my EP overview pages.
We've implemented PLM using the Web Dynpro ABAP scenario for employees. Now Iu2019m trying to integrate this into the Employee Self-Service overview page. I've got no issue to make the icon and area title appears, but when I click on it I get a blank page with Error 404. However when clicking on the link in the navigation bar (Level 2) then I get the page fine. So it looks like EP is not able to integrate correctly the Web Dynpro ABAP into the overview page in EP. Is there any specific Resource configuration?
One more thing is that if I've implemented the same iView using Resources -> Services -> Sub Areas -> Areas everything works fine, but I receive two navigation Levels (Area Group contains the Area Link and when I click it brings me to Sub Area with the single Service Link) I want to avoid this double clicking, calling the application directly from Area Group -> Area link.
Anyone has ever come across that kind of issue? Has anyone ever integrated a WDA application directly into an overview page?

Hi,
We faced a similar problem with BSPs and had to change the definition of the area link type entry.
I am assuming you have set the area link type to WebDynpro for ABAP and the resource is calling an Iview/page that has the WD ABAP application configured.
To get around the error, change the Area Link type to Calls a Portal page and make sure the resource calls an Iview/Page that has the WD ABAP application configured.

XML Meta data integration in Web Dynpro ABAP

Hello,
Is it possible to integrate XML Meta data with UI definitions in Web Dynpro for ABAP like Project Import in Development Studio?
Thanks!
Y. Hryhorovych

Hi Yuriy,
Web Dynpro components and applications are normal development objects. This means, you can transport them to any system using the change and transport system. There is no need to work with a separare xml representation.
Best regards,
Thomas

Sliver light integration with web dynpro abap

Hi All,
I was trying to integrate silverlight with web dynpro. Does any one has any document to start with..??
Where can i design silverlight application to upload in web dynpro..??
Thanks and Regards,
Vishesh,

Hi,
We faced a similar problem with BSPs and had to change the definition of the area link type entry.
I am assuming you have set the area link type to WebDynpro for ABAP and the resource is calling an Iview/page that has the WD ABAP application configured.
To get around the error, change the Area Link type to Calls a Portal page and make sure the resource calls an Iview/Page that has the WD ABAP application configured.

[Integration] Web Dynpro ABAP calling Flex in Popup (without Flash Islands)

Hi,
We do not intend to install Enhancement Package 1 in a near future.
Nevertheless, we do have requirements where Flex should be integrated with Web Dynpro ABAP (Flex components embedded or 'attached' to Web Dynpro ABAP applications).
I would like to open a popup showing a Flex component. Then, the user validates and the Web DYnpro ABAP application is resumed. All this integrated within EP 7.0.
What, according to you, would be the most effective combination :
- Suspend / Resume plug
- Server-side cookies
- iFrame (although it is deprecated)
Given what I have read so far, it seems encapsulating the .swf within a BSP application would be the best shot. Could it be possible to get rid of this 'additional layer' ?
Thanks in advance.
Best regards,
Guillaume

Web Dynpro ABAP
Define a suspend and a resume plug.
BSP
Retrieve the parameters sent by WDA either by AUTO attributes or the following code
CONSTANTS: c_resume_name          TYPE string VALUE `sap-wd-resumeurl`.
DATA: lt_tihttpnvp                TYPE tihttpnvp.
FIELD-SYMBOLS: <fs_httpnvp>       LIKE LINE OF lt_tihttpnvp,
               <fs_dept_magasin> LIKE LINE OF t_dept_magasins.
** Lecture des paramètres envoyés (par le WD ABAP)
CALL METHOD request->get_form_fields
CHANGING
    fields = lt_tihttpnvp.
READ TABLE lt_tihttpnvp ASSIGNING <fs_httpnvp> WITH KEY name = c_resume_name.
IF sy-subrc = 0.
e_url = <fs_httpnvp>-value.
ENDIF.
Flex
To return to the Web DYnpro ABAP, call a Javascript function within the BSP using this kind of code :
jsReturn = ExternalInterface.call("sendBackToSAP", selectedDepartmentsParam, orderParam);
BSP
First, to react to the user action in the Flex component, define a Javascript function in the
      function sendBackToSAP(departements, ordre) {
         fireServerEvent(departements, ordre);
         return("Done");
To fire a server-event (in order for BSP to call the WDA resume plug), I use this declaration :

       <bsp:htmlbEvent name= "fireServerEvent"
                       id = "flexAction"
                       p1 = "departements"
                       p2 = "ordre"></bsp:htmlbEvent>
Last, I simply call the URL that the WDA gives me first :
navigation->goto_page( e_url ).
If people are interested in a more detailed presentation, feel free to reply to this post, and I will write a blog about this. Nevertheless, it should become pretty obsolete with the Flash Islands release...
Edited by: Guillaume Garcia on Oct 11, 2008 11:13 AM

Integrating Flex/Flash in Web Dynpro ABAP(Netweaver 7.0) need info!

Hi all,
I need to embed a flash or a flex object inside a web dynpro abap application.I am working in Netweaver 7.0 and i don't have enhancement pack 1 installed.Is it possible ? If it is possible can anyone please provide me the coding and configuration details.
Thanks,
Saikat

I'm afraid that the SAP supplied integration technology - call FlashIslands - is only available from NetWeaver 7.01 and forward. You could perhaps do some simple integration (very little data transfer) with the iFrame UI element - although the iFrame is deprecated in 7.0 and 7.01, but does return to full support in 7.02. The other option would be to use the NetWeaver Portal or NetWeaver Business Client and have two iViews within the page. One iView would have WDA and the other some external technology (BSP, JSP, etc) to host the Flash/Flex content. Not tight integration, but you could potentially use Portal Eventing to at least communicate events.

Problem with image loading in flex (with web dynpro ABAP integration)

Hi,
I am working with integration of flex and web dynpro abap. I am facing unusal problem while loading the images. I have the images in the MIME folder of web dynpro application. Since my swf file and all the images that I want to use are in the same folder(MIME), I am accessing them giving just the image name as source for the image in flex.
By this method I get the images sometimes, but not everytime. So could anyone suggest me alternative method.
Regards
Prashant Chauhan
Edited by: Prashant8809 on Jul 17, 2011 11:56 AM

Hello Prashant,
you need to mention the full path as source for the image in flex.
ex. if your WD application name is Z_TEMP and image file name in mime folder is 'image.jpg' then you need mention the source in flex as
http://servername:50001/sap/bc/webdynpro/sap/Z_TEMP/image.jpg
Hope this solves your problem.
BR, Saravanan

Integration of Adobe Flex with SAP Web Dynpro ABAP

I am new to adobe flex development. i am following a tutorial prepared by
Mr. Karthikeyan Venkatesan (Infosys Technologies Limited) Integration of Adobe Flex with SAP Web Dynpro ABAP-for ABAPers
He used flex 3 to develop the flex application. i am using flex 4 downloaded from adobe(At a time Build release I used low version only 3.5). I followed all the steps. At a time of Run the data was not came.
How to fetch the data?
Please Guide how to proceed.

Hi Laxmikanth,
For Adebo Flex help..
Please go through Thomas tutorial..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10989ef6-968c-2b10-50a9-eb34a5267163&overridelayout=true
and ...
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/307b434f-ff32-2b10-e885-991247270480?quicklink=index&overridelayout=true
Hope it might helps you
Thanks,
Kris.

Error in integrating flex with web dynpro abap

Hi,
I did integrating Island Component into Web Dynpro ABAP as per the tutorial given by Thomas Jung.
Now i'm facing a problem that in that bar chart ,after giving the values in web dynpro table,bars are not getting populated.
I'm getting X and Y axis populated...only bars are not getting populated..
plz help....

hi,
i'm using flex 4...
Is it because of that??

Web Dynpro ABAP Stylesheet - Portal Integration

We have a Web Dynpro ABAP being displayed through a Portal iView. The Portal server and the Web Dynpro ABAP server are separate. Our problem is in getting the Web Dynpro ABAP to use the stylesheet of the Portal.
We can make this work by forcing an external stylesheet (via application parameters, global Dynpro settings, or passed on the end of the URL), but we have to hard-code the full URI of the Portal stylesheet. This would be very hard to manage if we hard-code every iView's CSS location (or set every individual Web Dynpro's application parameters), and we want instead for the Portal to supply whatever the user's stylesheet is dynamically.
So what we want is: if we change the Portal stylesheet, the Portal would just pass the new stylesheet URI to our ABAP Web Dynpro iViews without manual modification of the iViews.
Here is an example of what works:
http://our-abap-server.com/sap/bc/webdynpro/sap/cprojects?sap-ep-themeroot=https://our-portal-server.com/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/ourportalstylesheetname
Shouldn't the Portal iView automatically pass sap-cssurl or sap-ep-themeroot to Web Dynpro ABAP? We have "Supply Portal Stylesheet" checked on the iView it just doesn't pass anything to the Web Dynpro ABAP. Why wouldn't SAP pass this parameter dynamically to the Web Dynpro ABAPs? Is this a product error?
There seems to be a great deal of confusion about this on the SDN message forums... I think this may be the core issue.
We are using a 7.0 SP13 Portal with an ECC 6.0 SP12 backend.

Now that you mention it, I ran into that exact same issue -- the application parameters didn't work for hard-coding the theme. The fix ended up being the web server semicolon thing I mentioned earlier (that was why the parameter didn't make it to the backend).
The themeroot is automatically sent to the backend from the portal, so you shouldn't really have to manually send it as a parameter anyways.
I'd suggest talking to your network guys. Also this could be the result of the SP you are on (we're on 13 for the portal and the backend system -- maybe this feature doesn't work in some earlier SP's?). There are also some options to force the theme as a WD application parameter on the backend side, which you could check into. Details on those are here:
[http://help.sap.com/saphelp_nw2004s/helpdata/en/7b/fb57412df8091de10000000a155106/frameset.htm]
Also you could look at the requests being made by installing HttpAnalyzer in your browser. You can inspect "post" parameters going from the portal to the backend system. One of those posts (the first one to the backend system) should contain the parameter sap-cssurl (same kind of thing as sp-ep-themeroot). This is where our problem turned up as this parameter was not being posted.
Lastly, make sure that your frontend portal and backend portal are in the same domain. For instance:
frontend.domain.com
backend.domain.com
If your backend and frontend are in different domains it messes all kinds of things up, including stylesheets I think. If you can't get around this, then read about domain relaxing (but I highly recommend getting the domains the same).
When we started, ours were:
portal.dx.company.com
sap.company.com
This created all kinds of problems. Putting our systems in the same domain with the same protocol and fixing our little semicolon web server problem fixed basically all of our portal complaints. Up until that time, we had also had many problems with session management (backend sessions were getting stuck until the HTTP timeout).
That's all I know. Good luck.

Integrating Web Dynpro ABAP application in portal

Dear experts,
I created a Web Dynpro ABAP application. I need to Integrate it in portal and have to capture portal login id to my application.
Kindly guide me how to integrate WDA in portal and how to capture Portal Logon id in my application.
Thanks,
Kind Regards,
Ram

Hello ,
It is asking for SAP system user id and password becasue there is no SSO established between portal and the web dynpro system.
Now, either you can establish SSO between portal and the backend system by SAP Logon TIcket or user mapping.
SSO stands for single sign on.
SSO using SAP Logon Tickets :-
by using this technique you will be able to login into the backend by using SAP logon ticket
issued by the portal system. For this you need to import the .der certificate form the system administration ->system config -->
key ticket store. there download verify.der and upload it in the trusted system list in the backend in the trasaction strust_import.
here is link for this method.
http://wiki.sdn.sap.com/wiki/display/EP/LogonTickets,CertificatesandBackend+Certificates.
SSO using user mapping. :-
For this method you need to map the user in the portal to one user in the backend system.
You can do so by going to user administration in the portal there find the user id with which the user will login.
then go to the user mapping for system access tab there select the system from the dropdown and give user id and password
for the same system save it.
Now when you will login it wont ask for the user id and password.
And after this you can get the portal user id also in your web dynpro application.
Thanks
Sarbjeet Singh

Is there a way to get Web Dynpro ABAP available in a ECC 5 - NW2004 env?

We will start developing an offline Adobe interactive form with email functionality for ECC 5 on very short terms. We have to decide asap what client/server configuration we will use for this new functionality. We will also develop an online interactive form and an offline form with upload/download functionality for ECC 5. We will have to setup a client/server configuration that supports all 3 scenario's.
The main reason we would like to have NW2004S available for ECC 5 is because we would like to develop the forms in Web Dynpro ABAP instead of Java. Guided Procedures is a "nice to have" too, but not really important at this moment.
At this moment we think we have 3 options:
1. Investigate if we can make an Adobe solution in WDA for ECC 5 with our current setup
2. Upgrade ECC 5 - NW 2004 -> NW 2004S to get WDA functionality available
3. Install ADS for NW 2004 to be able to create Adobe solutions in ECC 5, then we will have to develop in WDJ
1. We have the following configuration up and running: NW2004S - CRM 5 and ADS installed: both Java and ABAP stack work properly. We are wondering if we could develop an Adobe interactive form in Web Dynpro ABAP in CRM 5 using BAPI's to retrieve the data from ECC 5 and put it on the form for display or update purposes. Also we have questions about the email functionality: do forms have to be send by email via a mailserver from ECC 5 via CRM 5 and back or can this be done directly from and to ECC 5 or is it not possible at all? Also we don't know if we can develop an online interactive form for ECC 5 via CRM 5. The current setup is not a real option for us right now as we see far too many uncertainties. Does somebody can give us some answers on the possibilities we are looking for?
2. My assumption is that upgrading ECC5 to ECC6 can be compared with upgrading 46C to ECC5. If my assumption is correct, this would mean an upgrade project with a 6 months leadtime within our company. If my assumption is wrong, please let me know. This upgrade will happen some day, but it has not been planned for 2007. So unfortunately, for us this is not an option at the moment because we cannot wait that long. I was hoping an upgrade of NW2004 -> NW2004s was not that time consuming but I guess this can be compared with a SAP upgrade project like 46C -> ECC 5.
3. Installing Adobe Document Services for NW2004 is not our preferred solution but we think it is the safest/easiest solution at this moment to get started with Adobe interactive forms for ECC 5 on short terms. We will have to develop in Web Dynpro for Java, so be it.
WDA is not a must but if we can find a client/server setup which gives us the possibility to build in WDA for ECC 5 functionality, that would be great. That's why I dropped the question on SDN. I want to be sure we choose the best option possible at this moment for us.
kind regards
Angelique

Yesterday I got new information through SDN which sounds very interesting:
There are technical repository integration points between ECC and the underlying SAP NetWeaver release. To get Web Dynpro for ABAP, you could install a stand-alone SAP NetWeaver 2004s system (without ERP) side-by-side.
Somebody else wrote: we set up a 3-system landscape of NW04s and have configured single sign on and trusted RFC's so that users can hit the webdynpro pages via the portal, and those systems make the necessary queries to the backend systems via RFC.
Does somebody know if this stand-alone system could be a proper solution for our situation? Does somebody foresee any problems related to Adobe LiveCycleDesigner or ADS?

Web Dynpro ABAP in SAP E-Recruiting

Hi,
We just imported SP8 for our SAP E-Recruiting 6.0. SP8 offers Web Dynpro ABAP as candidate UI. One question we have is how WD pages incorporated for recruiters who still use BSP pages. For example, when a recruiter logs into E-Recruiting and finds a specific candidate, he/she can click on "Candidate Profile" to get to that candidate's pages. In BSP technology, recruiter actually uses exactly the same pages that candidate uses for Work Experience, Education, etc.. With candidate UI using WD technology, does recruiter use the same WD pages when displaying candidate profile information? I have been searching all the possible places, such as IMG, SICF, in order find a spot so that I can set the switch on, but so far unsuccessful.
Any help is greatly appreciated.
Li

Hi Li ,
At best of my understanding in WD ABAP , its possible to make one WebDynpro page serving same purpose ( showing profile deatils ) visible for manty( Candidate , as well as Recruiter ) ....
I would like to know what exactly you want from web Dynpro ..then I will be in better position to tell you.
FYI ...
1) Web Dynpro ABAP
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
2 ) I can give you links that can help you a lot.
First of all start doing SAP SDN tutorials .
Create some compenents with BAPI , Component usage and ALV .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
Try to Download demo tutorials from SDN library & Try to search WebDynpro ABAP WebLogs .
Wait not just that SAP has provided you with ample demo example of WD ABAP already bundled with SAP . Just Try out Components starting with WDR . I can tell you few like WDR_TEST_EVENTS ( It shows how every UI elments to use )
See packages like SWDP_DEMO , SALV_WD_DEMO
there are many more .
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
The specified item was not found.
Cheers
Parry

How to fill BI cube with Web Dynpro ABAP Program UI

Hello,
I am new in web dynpro ABAP and need zour help. How can i write aABAP web dynpro program, which allows the user to enter transactional data and saved in the real time infocube.
I know that such a functionality exist in the integrated planning where a real time infocube, changeable query, data provider and web template are created, and through which a user can enter or change for sepecific master data combination transactional data and save them in the info cube.
Have you an experience in the way of implementing an user interface in connection with the real time cube. Do i have to use the BIAPPLICATIONFRAME UI element or is there a better way.
Many thanks
Arnaud
Edited by: Arnaud on Jul 28, 2010 3:32 PM

Hi Rajpal,
Please go through this..
calling BI report
Cheers,
Kris.

Web Dynpro ABAP, Crystal and ACF

Hi fellow developers,
I am attempting to get an Web Dynpro ABAP application working with an embedded Crystal report.
We are on ECC6, release 702. So far I am just using the stock standard application provided by SAP: WD_ACF_TEST_CRYSTAL.
Unfortunately I get the following errors:
Techincal info:CoCreateInstance error with guid: 2F848BE4-8329-4C09-8613-FC9DFF55C10F
Messagetextid:352 Messageclass info:Integrated control cannot be started
I am using a local installation of the Netweaver Business Client and I have installed Crystal Reports Viewer 2008 locally on my machine.
I have tried WD_TEST_APPL_ACFEXECUTE and after saving the certificate, it works.
I think the problem lies with the Active Controls White List in SPRO.
Thank you in advance,
Jason Lante

Nevermind, I found the solution.
It appears that you need to install the Crystal Reports ALV Adapter (xSAPCRVAdpt.exe) for this to work.
Refer to note: 1353044.
Jason

Xcelsius integration in Web Dynpro ABAP

Similar Messages

Maybe you are looking for