Xcode Problem 'No signing identity found' how to fix?

Hi, I am in no way a developer, I just use XCode to compile some applications I use where the latest releases are only available as source code.
Until now I have not had any issue compiling these applications.
However, just recently when trying to compile Boxer from http://www.boxerapp.com/ I am presented with an error that states:
No signing identity found
I do not wish to codesign someone elses' application with my own nonexistent signing identity. Can this pointless function be bypassed so I can build the app sucessfully?

Have you looked in the build settings to see if Don;t Code Sign is selected?

Similar Messages

  • How can I correct this error: no matching code signing identity found

    I signed up as an apple developer so I could download the tools to learn to build apps. I just installed Xcode 5.1.1, when i opened the program and created my first test project I got an error message: "no matching code signing identity found". how can i get rid of (correct) this error? I am just learning and I am not ready to join the $99 developer program yet.

    Try setting Signing to None in the Target General pane.

  • No matching code signing identity found - Xcode error

    Hello,
    I am new to Mac and Xcode. I just want to learn Xcode and not publish any apps. Hence I did not enroll in the paid developer program.
    Whenever I try to create a project in Xcode, it gives me this error - "No matching code signing identity found". If I click on "Fix Issue", it asks me to add my apple ID. I did that but I cannot add it to any team. I also tried requesting a certificate through keychain. But I am not sure on how to check the status of that.
    Please pardon my lack of knowledge on this as I just a beginner. But any help on this will be greatly appreciated.
    Thank you.

    You will probably get better answers to questions like these in the developer forums. https://developer.apple.com/devforums/
    Best of luck.

  • HT4061 I cannot switch my IPAD on and it will not power up - i had this problem before and cannot remember how we fixed it?

    Can anyone help us please?
    I cannot switch my IPAD on and it will not power up - i had this problem before and cannot remember how we fixed it?

    Press and hold both the home button and lock button until the apple logo shows up.

  • Thunderbolt port no hardware was found how to fix it

    thunderbolt port no hardware was found how to fix it

    Greetings Housam-farhat,
    From what I can gather, it sounds like you are experiencing an issue with your Thunderbolt port or a Thunderbolt device connected to it. I am unclear of what operating system you are using but the following article focuses on Thunderbolt troubleshooting in Yosemite. You may find it helpful:
    OS X Yosemite: If a Thunderbolt device isn’t working
    If your Thunderbolt device isn’t working, try any of the following suggestions:
    Check the device: 
    Make sure the device is turned on and its cables are connected. If the device requires a power cord, make sure it’s plugged in. If the device is in a chain of devices, remove the device from the chain, then plug it directly into your computer and verify that it works. 
    Check that you’re using the right cable: 
    Make sure you connect the Thunderbolt device with a Thunderbolt cable, and not a Mini DisplayPort cable. A Thunderbolt cable has a Thunderbolt icon  on the connector. 
    Check for missing software: 
    Make sure you installed any software that came with the device. Check the manufacturer’s website for the latest software.
    Check chained devices: 
    If the device is in a chain of connected Thunderbolt devices, each connected to another with only one connected directly to the Thunderbolt port , disconnect the device from the chain and verify that it works (see Check the device, above). Then make sure that all the devices other than the one connected directly to your Mac have power cords. (If the device connected directly to your Mac requires a power cord, it should have one, too.) 
    If a Mini DisplayPort device is part of the chain, make sure it’s at the end and is connected with a Mini DisplayPort cable.
    Verify that the device appears in System Information: 
    Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information. 
    In the window that appears, see if the Thunderbolt device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps. 
    Restart apps: 
    Quit and restart any apps that use the device. 
    Restart your Mac: 
    Choose Apple menu > Restart.
    If these suggestions don’t work, see the documentation that came with the device for troubleshooting tips, or contact the manufacturer for help. 
    About Thunderbolt
    Check your device’s Thunderbolt connection
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • My printer HP photosmart was working but now says printer not responding. Wireless network test came back with no problems. Any suggestions on how to fix this?

    My printer HP photosmart was working but now says printer not responding. Wireless network test came back with no problems. Any suggestions on how to fix this?

    marie274 wrote:
    My printer HP photosmart was working but now says printer not responding. Wireless network test came back with no problems. Any suggestions on how to fix this?
    What exactly happens between the the time the printer was last working well and no on your system? Any updates or upgrades?
    Lupunus

  • No signing identity found

    Howdy,
    I found an Adventure project for the Mac, and wanted to mess around with it. However, when I try to run or build it, I get a message that gives me the above identity error and the option to fix it. this in turn gives me a message window saying  ". . . you need to add an Apple ID account that is enrolled in a Developer Program."
    Which evidently I no longer am. There was a time way back when on joined the Developer Program for free, but now in looking around at the website, it looks like it has become rather expensive (99 bucks a year!!) and in particular for a person who just wants to play around and try to learn things; not develop for fame or fortune.  Does Apple have some sort of generic, for your computer only identity or would I have to join up, pay 99 bucks just to run this project code?
    An Aside============>
    Heck, right now, I am playing with fortran and want to get the original Adventure Source Code up and running - - just for fun. I am working my way through an old FortIV manual, again for fun and a really interesting history lesson, and I have a Fortran 90 / 95 Manual on the way to keep on going with my history lessons.
    eventually, I'll get back to working through Objective-C and C++. I thought that it would be fun to see how this Mac project worked, but alas no joy.
    I appreciate your insights!!
    trav

    Howdy,
    I did have a Apple ID kind of registration, just no groups etc.  However, I did notice that for signing identity, there was a NONE radio button that cleared things up after I clicked the button. I had to quit Xcode and restart it to get things to build correctly however. Thank you for sending me in the right direction!!

  • Xcode 5 No Code Identity Found

    I keychain on my IMac Stuffed up i signed back into my dev account on Xcode i pressed fix issue it says Your Account Has Already has a valid Certificate
    If you have your signing identity on another Mac, you can import a developer profile. You can also revoke the current certificate and request one again. so i pressed revoke and request and didn't help does anyone know how i can get a new certificate and fix this issue

    wrong forum, this is Keynote

  • Having problems accessing any apps on my iCloud. Set up and signed in successfully but then when I click on an app it just says there's a problem but doesn't say how to fix it. Please help, am very new to this!

    Hi
    I am very new to updating my iPod touch and this is the first time I've used the iCloud. However, I am having problems accessing any apps on my iCloud such as photos, reminders etc. I've set it up on my iPod touch successfully and I can sign in on my PC. However, when I try to access any of the apps it says there was a problem. It doesn't tell me how to fix it or what the problem is.
    Is anyone able to help?

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • I updated my iphone 4 software to the new iOS 5 and since i have no service. Is anyone else having the same problems if so any ideas how to fix it?

    I recently updated my software on my iphone 4 to the iOS 5 and ever since i have had no service. I have been on the phone constantly with at&t tech support and apple. Tech support cannot figure it out and said they think my problem has everything to do with the new software. Apple is saying it has nothing to do with the new software that it is probably something to do with my phone itself but i was not having this problem until i updated the new software. Is anyone else having this same issue and if so any ideas on how to fix it?

    Yeah, it´s happening in normal 3g coverage area, in fact, i used the 3g to download the iOS but after installing it, the phone doesn't get the 3g anymore.
    I tryed the reboot pocess, but it didn't fix it
    I haven't tryed the restore to factory settings process,
    Is there a way to downgrade to iOS 5.1 again?
    Thaks

  • I just ran an Apple software update and lost video in my Final Cut 7 running on OS 10.6.8.  It is indicating a codec problem.  Any ideas on how to fix this?

    I just ran a software update and lost video in my FCP 7 timeline (OS 10.6.8).  I get an error message that there is a codec problem and get either a green or black screen.  Anybody have idea how to fix this?

    what happens if you create a new apple prores 422 sequence and drop bars and tone into it.
    Does it display correctly?  If so, I'd assume the the prores codecs are ok.
    Not sure I"ve worked with hdv2 material.  You may need to reinstall your os and fcp and not do the latest software update.  People have definitely reported problems with hdv material after the update.   Maybe someone will speak up with an alternative solution. 

  • ZEN EXTRA EAX FREEZES"HARD DISK PROBLEM" AND WON'T RESCUE:HOW I FIX

    Well nobody tried to help me so I got on the web.first if you try to paperclip reset and nothing,try this:hold the paperclip(you need both hands) and hold play/pause at the same time and disengage paperclip and you get rescue mode this is how I fixed it once,their are four options:clean disk,reboot and two more.CLEAN DISK AND RE-BOOT ONLY!Because the second option will clean out your library!If that does'nt work and if it says:"hard dri've problem" after trying several times you have to smack it on the palm of your hand and after three smacks it went back to normal!(By the way it fell off the countertop with the protecti've case and that's when this night time nitemare began,milk and cookie insomnia cure!). It just skipped,the hard dri've looks like a little record player and I guess it(like a needle on a record it jumped?)But now it works perfect again. I have "THREE WARRENTY",(TWO YEARS LEFT) but I would lose my 2,800 library if replaced repaired! A chance I did'nt want to take.PLMK if this works,SANSOO..........

    A few weeks ago I dropped my Extra and had the same problem, it was now out of warranty so I figured I had a paperweight, so when I ran into this thread I figured I had nothing to lose., and gave it firm whacks on my palm, (the first one didn't work) To my surprise it powered back on, and now seems to work. I transferred new songs to it and it is now charging up again. I admit this has all occurred in the past hour so I don't know how permanent this is, but it does give me hope. I would like to emphasize though that this was a last ditch effort. I had tried going into the recovery mode and got a hard disk problem error so none of the regular options would work.

  • New to Objective-C -- Found problem code but am unsure how to fix. HELP?

    Hi,
    I have been writing a Tax Class as a challenge to learn Objective-C. I have fiddled and found the error in my code but am unclear about why this is happening and I would like to learn from this incidence.
    I have designed my class around the Australian Tax income system - which is as follows - http://www.ato.gov.au/youth/content.asp?doc=/Content/40811.htm
    I have defined alot of constants -
    #define kTaxBracketOneTaxRate .15
    #define kTaxBracketTwoTaxRate .30
    #define kTaxBracketThreeTaxRate .40
    #define kTaxBracketFourTaxRate .45
    #define kTaxFreeThreshold 6000
    #define kTaxBracketOneCutOff 34000
    #define kTaxBracketTwoCutOff 80000
    #define kTaxBracketThreeCutOff 180000
    I have a series of methods that all build on each other. I call and pass them the total gross taxable income and in turn they return the taxable amount. The first method calls and returns with no issues.
    But the subsequent methods are not functioning correctly. I got to the second method "-(int) calcTaxAmtBracketTwo: (int) income" and change the first part where I call the first method eg "[ self calcTaxAmtBracketOne: (int) income ]" with the solid value eg 4200 (which is the correct amount) then the method returns the correct value. So why doesn't my code work correctly? Why is this call [self calcTaxAmtBracketOne: (int) income] with in the other method no returning a correct value???
    I also do not know why this forum is not displaying my [] square brackets in my below pasted code? Anyway -->
    <pre>
    -(int) calcTaxAmtBracketOne: (int) income
    return ((income - kTaxFreeThreshold) * kTaxBracketOneTaxRate);
    } // (34000 - 6000) *.30
    -(int) calcTaxAmtBracketTwo: (int) income
    return [ self calcTaxAmtBracketOne: (int) income ] + ((income - kTaxBracketOneCutOff)* kTaxBracketTwoTaxRate);
    } //4200 + ((80000 - 34000) *.30)
    </pre>
    Sorry if this seems like a silly question, but I have tried all different things.. and I can't figure it out.
    Thanks in advance,
    Nate!

    nateaus wrote:
    So can someone answer why can I not call THIS METHOD -->
    -(float) calcTaxAmtBracketOne: (float) income
    return ((income - kTaxFreeThreshold) * kTaxBracketOneTaxRate);
    FROM THIS METHOD AND OBTAIN A CORRECT RESULT?
    -(float) calcTaxAmtBracketTwo: (float) income
    return [self calcTaxAmtBracketOne: (float) income] + ((income - kTaxBracketOneCutOff) * kTaxBracketTwoTaxRate);
    Hi Nate - The code you posted Jul 12, 2009 12:27 PM ran without any problem in my testbed on the first try. calcTaxAmtBracketTwo is certainly calling calcTaxAmtBracketOne and using that result in the calculation you coded. So it's clear that you don't have the kind of programming problem we generally discuss in this forum. By this I mean that If the numbers aren't what you expected, you correctly programmed the wrong calculation.
    As to the calculation, I'm not an accountant, but I agree with Et. For example, your program is taxing any income over 180,000 four times: at 15% in calcTaxAmtBracket, at 30% in calcTaxAmtBracket2, and so on. This is because each calcTax method taxes all of the income above the lower cutoff, instead of only the income in its bracket. Here's an example that only taxes each bracket one time:
    -(float) calcTaxAmtBracketOne: (float) income
    if (income <= kTaxFreeThreshold)
    return 0.0;
    float amt1 = MIN(income, kTaxBracketOneCutOff);
    float tax1 = ((amt1 - kTaxFreeThreshold) * kTaxBracketOneTaxRate);
    NSLog(@"ctabOne: income=%2.2f amt1=%2.2f tax1=%2.2f", income, amt1, tax1);
    return tax1;
    -(float) calcTaxAmtBracketTwo: (float) income
    float tax1 = [self calcTaxAmtBracketOne:income];
    if (income <= kTaxBracketOneCutOff)
    return tax1;
    float amt2 = MIN(income, kTaxBracketTwoCutOff);
    float tax2 = tax1 + ((amt2 - kTaxBracketOneCutOff)* kTaxBracketTwoTaxRate);
    NSLog(@"ctabTwo: income=%2.2f tax1=%2.2f amt2=%2.2f tax2=%2.2f", income, tax1, amt2, tax2);
    return tax2;
    -(float) calcTaxAmtBracketThree: (float) income
    float tax2 = [self calcTaxAmtBracketTwo:income];
    if (income <= kTaxBracketTwoCutOff)
    return tax2;
    float amt3 = MIN(income, kTaxBracketThreeCutOff);
    float tax3 = tax2 + ((amt3 - kTaxBracketTwoCutOff)* kTaxBracketThreeTaxRate);
    NSLog(@"ctabThree: income=%2.2f tax2=%2.2f amt3=%2.2f tax3=%2.2f", income, tax2, amt3, tax3);
    return tax3;
    -(float) calcTaxAmtBracketFour: (float) income
    float tax3 = [self calcTaxAmtBracketThree:income];
    if (income <= kTaxBracketThreeCutOff)
    return tax3;
    float tax4 = tax3 + ((income - kTaxBracketThreeCutOff)* kTaxBracketFourTaxRate);
    NSLog(@"ctabFour: income=%2.2f tax3=%2.2f tax4=%2.2f", income, tax3, tax4);
    return tax4;
    -(int) totalTaxPayable: (int) income
    return floorf([self calcTaxAmtBracketFour:(float)income]);
    // console log for the above:
    [Session started at 2009-07-13 01:15:05 -0700.]
    2009-07-13 01:15:08.754 NatesTax[2984:20b] ctabOne: income=34000.00 amt1=34000.00 tax1=4200.00
    2009-07-13 01:15:08.755 NatesTax[2984:20b] CalcBracket1: 4200.000000
    2009-07-13 01:15:08.755 NatesTax[2984:20b] ctabOne: income=80000.00 amt1=34000.00 tax1=4200.00
    2009-07-13 01:15:08.755 NatesTax[2984:20b] ctabTwo: income=80000.00 tax1=4200.00 amt2=80000.00 tax2=18000.00
    2009-07-13 01:15:08.756 NatesTax[2984:20b] CalcBracket2: 18000.000000
    2009-07-13 01:15:08.756 NatesTax[2984:20b] ctabOne: income=180000.00 amt1=34000.00 tax1=4200.00
    2009-07-13 01:15:08.756 NatesTax[2984:20b] ctabTwo: income=180000.00 tax1=4200.00 amt2=80000.00 tax2=18000.00
    2009-07-13 01:15:08.756 NatesTax[2984:20b] ctabThree: income=180000.00 tax2=18000.00 amt3=180000.00 tax3=58000.00
    2009-07-13 01:15:08.757 NatesTax[2984:20b] CalcBracket3: 58000.000000
    2009-07-13 01:15:08.757 NatesTax[2984:20b] ctabOne: income=200000.00 amt1=34000.00 tax1=4200.00
    2009-07-13 01:15:08.757 NatesTax[2984:20b] ctabTwo: income=200000.00 tax1=4200.00 amt2=80000.00 tax2=18000.00
    2009-07-13 01:15:08.758 NatesTax[2984:20b] ctabThree: income=200000.00 tax2=18000.00 amt3=180000.00 tax3=58000.00
    2009-07-13 01:15:08.758 NatesTax[2984:20b] ctabFour: income=200000.00 tax3=58000.00 tax4=67000.00
    2009-07-13 01:15:08.758 NatesTax[2984:20b] CalcBracket4: 67000.000000
    Let us know if the above numbers are closer to what you expected.
    - Ray

  • When I sign on to firefox, the main screen disappears to the right. I tried to minimize, maximize, f11 full screen and even reinstall - same problem. Any ideas on how to fix?

    This issue has not happened before and just started yesterday. I have not installed any new programs and have no idea what may have triggered it. The program is running - I just cant see it.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Aha! I see the problem but don't know how to fix it. Multiple IDs!

    Over the years, my apple reliance has increased. I have two different email addresses in a bizarre combination on my iMAC, iPhone, and iPad. It prevents me from doing backups completely, getting the latest version of some apps, and using the cloud as it was meant to be.
    IDs, next, are shortened to make this more readble.
    My iMAC uses an itunes ID called TAR. This is where I have bought plenty of iTunes music, but always export to MP3 -- so if I have to trash this ID it'd be ok.
    My iPad shows an iCloud ID of TNT, an iTunes store ID of TAR, and my appleID as TAR.
    My iPhone shows an iCloud ID of TNT, and an apple ID of TAR. I have purchased some apps and I fear not using TAR on it may nulify all of those purchases.
    Should I simply DELETE my iPhone and IPad iCloud accounts and then create new ones on those devices with ID of TAR?
    Please advise! What do I need to set where so that I have one and only one email address for everything.
    If this is NOT the cure to my problems, what else can I check? (Eg. when I do a backup in iTunes on my iMac it says that my iPhone and iPad are not recognized... yet it proceeds with a backup MOSTLY. Authorizing/reauthorizing it from the iMac seems to make no difference.
    The password guesses and resets over the years have been insane, as you might have gathered.
    Thank you!
    Tim

    yeah, remove the icloud accounts, and choose to keep the data on the device when you do so. then, when you sign in with the other id, it'll ask if you want to merge, and you will. then all your information will be in one id

Maybe you are looking for