Xfce4 pannel problem

when start xfce4, there is 2 pannels up and bottom..
I wanted only bottom pannel, so deleted pannel up.
But all pannel was disappered, and pannel settup menu dosen't work..
Should I use two pannels ????

I've no great experience in using XFCE4, but I've lately been using it more and more. Deleting the default panels seems to not work particularly well from the GUI utilities.
What I do is the following: I open ~/.config/xfce4/panels/panel.xml and edit it as I wish. Make a backup if it, and then simply remove the entry for the panel you want to get rid of. Next time you login to a xfce4 session it should be gone.
Maybe there's a better way, I don't know.

Similar Messages

  • [SOLVED] xfce4 automounting problem on usb dev with utf8 encoded files

    I have problem of auto mounting usb external drive contains utf8 encoded files under xfce4.
    Using hal and dbus for usb device detection.
    Heard that I need to add iocharset=utf8 under fstab or hal fdi configure files and tried them all but didn't work
    usb devices with vfat always got mounted with default charset.
    I found out that exo-mount is the one doing the actual mounting and that it is the one that cannot take all extra mounting options such as iocharset etc.
    Have tried gnome to mount this hard drive and works find with nautilus option that let me set various mount options for each harddrive.
    Is there any way to replace exo-mount with some other alternative mounting tools that work with thunar?
    Any workaround will be helpful as long as I can mount my usb drives with prefer charset so that I don't have to guess all ???marked files.
    Heard that xubuntu replaced that exo-mount with gnome-mount to handle drives with extra mount options such as iocharset.
    but I am pretty new to configuring things and couldn't find the step by step instruction for this so please provide the complete solution.
    Link to the pages that explain workaround would be nice as well.
    Thanks in advance!
    Last edited by axca (2007-10-17 18:24:50)

    Found the patch for exo-mount so that it takes additional mount options HAL suggests.
    https://bugzilla.altlinux.org/attachmen … ction=diff
    Now my usb drive can be mounted with the proper charset.
    Hope this patch helps others with similar situation as well!
    Last edited by axca (2007-10-15 15:41:47)

  • SLiM + XFCE4 systemd problems

    I've recently switched to using systemd from initscripts. Generally it's been ok, except that I'm having problems with SLiM and XFCE4.
    I've enabled the SLiM service (`systemctl enable slim.service`). But everytime I log in, past the main login window, I always get a blank screen without any signs of XFCE4 activity. I can still use XFCE4, but I have to start X manually from the console every time I boot up (`exec startxfce4`).
    Also, in the XFCE4 session, the buttons for restart, shut down, suspend, and hibernate can't be clicked. I can only click log out.
    I've tried the suggestion in the wiki: https://wiki.archlinux.org/index.php/Sy … ce-session, but I'm still having this problem.
    Any pointers on how to fix this?

    carongangoo,
    Sorry to do this to you, but can I please get you to start a new thread?  This one is two and a half years old and a lot has changed in that time -- systemd, xfce4 and slim.  I've not seen most of the contributors to  this thread in a long time.
    I am going to close this thread; feel free to link back to this thread from your new one if you so wish.  The nice thing is that you will be the owner of the new thread.
    https://wiki.archlinux.org/index.php/Fo … bumping.22
    EDIT:  Not fair, I typed more than did Jasonwryan
    Last edited by ewaller (2015-03-10 20:15:16)

  • Xfce4 mixer problem

    Then i click on Sound Mixer button in Settings window, mixer dont start and settings window crash(or close). If i run xfce4-mixer from console, all windows and panels blinking 2 times and mixer appearing. Please help me, what happens?
    PS: Sorry for bad english

    Net@Worm wrote:
    In vc1 only one line, repeated many times:
    *** attempt to put segment in horiz list twice
    Gtk up to date by pacman -Syu.
    Ah shoot.  I get that same "message" over and over again too, but it's not related to your problem.  I think that's just a GTK widget problem with the panel, trying to resize and fit some stuff I guess.  That constant "message" is, however, interfering with seeing what's crashing, since it's scrolling off that VC.  I don't know where else xfce4 pipes it's errors to.
    I'll check through the source a bit and see if I can help you out.
    You could try this for capturing the VC/1 output: "startxfce4 &> /tmp/xfce4.log"
    Start up xfce that way, open up a terminal in xfce and use "tail -f /tmp/xfce4.log" (hit ctrl-c to cancel the "tail" process at any time).  Try to repeat those steps which give you an error with the settings menu, and watch what reads out in your terminal.  If for some reason it crashes, open up that file later and look at the last few lines in the file before it crashed.  You'll probably have to scroll down a bit since it will probably pipe all your xinit stuff in there too.

  • [SOLVED] xfce4 / Thunar problems moving files between folders

    In XFCE4 I open THUNAR file manager, I am browsing DOCUMENTS.  If I move one file from DOCUMENTS, to ../PICTURES (by dragging it),
    it will move it.  However, when I now browse PICTURES, I don't see the file I moved. Unless I click the REFRESH Icon in Thunar.
    This started happening with very recent updates.
    [UPDATE:] Solved after upgrading thunar (1.6.6-2 -> 1.6.7-1)
    Last edited by Kilzool (2015-04-21 11:16:50)

    You should report this at the upstream bug tracker. The Xfce developers are likely not reading this forum.
    I could reproduce this bug with these steps:
    1. Open two Thunar windows (Documents and Pictures folder)
    2. Move a file from one folder to the other by using drag'n'drop
    The result is that the file is moved but it is still shown in Thunar until a manual refresh.
    EDIT: This is already fixed by this commit so Thunar 1.6.7 should work fine.
    Last edited by Radioactiveman (2015-03-23 13:46:53)

  • Running only the Xfce4-Pannel

    I like running a minimal environment, and typically do most of my work from command line.
    (Hey I grew up with command line UNIX!)
    For a long time I also ran the Gnome panel, and Nautilus  (no desktop) without running a full gnome session. Just to do quick file moves and manipulation and application launching.
    Things were great, simple and useful.
    Now Gnome 3 has come alone  and the gnome-panel is useless and nautilus has changed.   YUCK!!!!!
    So I started to shop around for a replacement panel, and settled on Xfce4-panel, with Thunar.
    Launching Xfce4-panel on its own works, one time after a reboot, but after I logout and log back it it 'resets' all its configuration back to a single blank panel again!
    Does anyone run just the Xfce4-panel on its own?
    Can it be run without needing a "session manager"?
    Any other suggestions?
    I tried lxpanel  but I can't get it to use larger icons in a side panel, and it looks plain silly with tiny launch buttons on the side of a huge screen.  It is also not as configurable at Xfce4-panel.

    The xfce4-panel information is saved,  and if I reboot and run it it works.  But if I then logout and log back it everything gets wiped!
    I think I kill something I probably shouldn't when I logout, but I have no idea what.
    I still like xfce4-panel better than lxpanel  (better configuration of launchers and interfaces well with thunar) but it complaints about no SESSION_MANAGER and it's wiping of the panel configuration is becoming most annoying.

  • [Solved] xfce4+compiz: conky can only been seen if I miminzed windows?

    I have xfce4 and compiz-xfce4 installed with my Arch Linux?
    I added conky in my auto start-up setting. It turns out conky can only be seen if I minimize all windows.
    When I clicked the "show desktop" button in my xfce4-pannel, conky just cannot show up.
    Thanks,
    (pls kindly see my another question about xfce4+compiz as well: https://bbs.archlinux.org/viewtopic.php?id=177106)
    Last edited by hellolj (2014-02-13 23:12:16)

    Solved
    It turns out I have to uncheck the "Hide Skip Taskbar Windows" option under  "General Options"  in Compiz configuration settings manager.

  • Problem with xfce4-session.

    Hello, I'm not sure whether I'm posting in the correct section of the forums but anyway, here's the problem, after upgrading the system xfce started crashing randomly (It definitely crashes when I try to suspend first time, then it does it correctly). I took a look in Xorg and fglrx log files, they didn't contain any errors. However, dmesg listed a segfault of xfce4-session in libglib, is there any solution for that problem or I just have to wait until the upgrade. Also, I have and AMD E-450 APU, and a proprietary catalyst driver from catalyst-stable. Here is the output from dmesg (the segfault message is in the end):
    [ 0.000000] PM: Registered nosave memory: 00000000afb64000 - 00000000afb6c000
    [ 0.000000] PM: Registered nosave memory: 00000000afb6c000 - 00000000afb91000
    [ 0.000000] PM: Registered nosave memory: 00000000afb91000 - 00000000afbd4000
    [ 0.000000] PM: Registered nosave memory: 00000000afd47000 - 00000000afef7000
    [ 0.000000] PM: Registered nosave memory: 00000000aff00000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
    [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
    [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
    [ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
    [ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
    [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
    [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
    [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
    [ 0.000000] e820: [mem 0xaff00000-0xfebfffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s84544 r8192 d21952 u1048576
    [ 0.000000] pcpu-alloc: s84544 r8192 d21952 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 966665
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lqx root=UUID=ee58701b-54f4-4a5e-a884-636f3ac8cb2f ro nomodeset usbcore.autosuspend=1 quiet usbcore.autosuspend=0 nomodeset nmi_watchdog=0 pcie_aspm=force
    [ 0.000000] PCIe ASPM is forcibly enabled
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3782720k/5242880k available (4438k kernel code, 1314812k absent, 145348k reserved, 2809k data, 640k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:33024 nr_irqs:512 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.001000] tsc: Detected 1646.401 MHz processor
    [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3292.80 BogoMIPS (lpj=1646401)
    [ 0.000010] pid_max: default: 32768 minimum: 301
    [ 0.000063] Security Framework initialized
    [ 0.000068] SELinux: Disabled at boot.
    [ 0.000071] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000073] Yama: becoming mindful.
    [ 0.000095] Mount-cache hash table entries: 256
    [ 0.000418] tseg: 00aff00000
    [ 0.000422] CPU: Physical Processor ID: 0
    [ 0.000424] CPU: Processor Core ID: 0
    [ 0.000426] mce: CPU supports 6 MCE banks
    [ 0.000442] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
    Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
    tlb_flushall_shift: 5
    [ 0.000558] Freeing SMP alternatives: 16k freed
    [ 0.002455] ACPI: Core revision 20121018
    [ 0.015032] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.025024] smpboot: CPU0: AMD E-450 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00)
    [ 0.126038] Performance Events: AMD PMU driver.
    [ 0.126044] ... version: 0
    [ 0.126047] ... bit width: 48
    [ 0.126048] ... generic registers: 4
    [ 0.126050] ... value mask: 0000ffffffffffff
    [ 0.126051] ... max period: 00007fffffffffff
    [ 0.126053] ... fixed-purpose events: 0
    [ 0.126054] ... event mask: 000000000000000f
    [ 0.134178] smpboot: Booting Node 0, Processors #1 OK
    [ 0.147430] Brought up 2 CPUs
    [ 0.147435] smpboot: Total of 2 processors activated (6585.60 BogoMIPS)
    [ 0.148250] devtmpfs: initialized
    [ 0.148666] PM: Registering ACPI NVS region [mem 0xafaf7000-0xafb3efff] (294912 bytes)
    [ 0.148681] PM: Registering ACPI NVS region [mem 0xafb49000-0xafb4bfff] (12288 bytes)
    [ 0.148683] PM: Registering ACPI NVS region [mem 0xafb4d000-0xafb4dfff] (4096 bytes)
    [ 0.148686] PM: Registering ACPI NVS region [mem 0xafb64000-0xafb6bfff] (32768 bytes)
    [ 0.148689] PM: Registering ACPI NVS region [mem 0xafb91000-0xafbd3fff] (274432 bytes)
    [ 0.149151] regulator-dummy: no parameters
    [ 0.149293] NET: Registered protocol family 16
    [ 0.150271] ACPI: bus type pci registered
    [ 0.150593] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.150599] PCI: not using MMCONFIG
    [ 0.150601] PCI: Using configuration type 1 for base access
    [ 0.150602] PCI: Using configuration type 1 for extended access
    [ 0.155916] bio: create slab <bio-0> at 0
    [ 0.156315] ACPI: Added _OSI(Module Device)
    [ 0.156319] ACPI: Added _OSI(Processor Device)
    [ 0.156321] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.156323] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.158103] ACPI: EC: Look up EC in DSDT
    [ 0.160056] ACPI: Executed 3 blocks of module-level executable AML code
    [ 0.172510] ACPI: Interpreter enabled
    [ 0.172527] ACPI: (supports S0 S3 S4 S5)
    [ 0.172576] ACPI: Using IOAPIC for interrupt routing
    [ 0.172886] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.172961] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.213033] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.213391] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 0.245487] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    [ 0.245850] ACPI: No dock devices found.
    [ 0.245858] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.246163] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.246166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.246887] PCI host bridge to bus 0000:00
    [ 0.246895] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.246899] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.246906] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.246910] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.246913] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.246916] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.246919] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.246923] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
    [ 0.246938] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
    [ 0.246999] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
    [ 0.247013] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
    [ 0.247023] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
    [ 0.247032] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
    [ 0.247093] pci 0000:00:01.0: supports D1 D2
    [ 0.247118] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
    [ 0.247130] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
    [ 0.247202] pci 0000:00:01.1: supports D1 D2
    [ 0.247388] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
    [ 0.247482] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [ 0.247576] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
    [ 0.247602] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
    [ 0.247615] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
    [ 0.247629] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
    [ 0.247642] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
    [ 0.247655] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
    [ 0.247669] pci 0000:00:11.0: reg 24: [mem 0xfeb4d000-0xfeb4d3ff]
    [ 0.247749] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    [ 0.247767] pci 0000:00:12.0: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
    [ 0.247863] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    [ 0.247889] pci 0000:00:12.2: reg 10: [mem 0xfeb4b000-0xfeb4b0ff]
    [ 0.247997] pci 0000:00:12.2: supports D1 D2
    [ 0.248000] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.248033] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    [ 0.248052] pci 0000:00:13.0: reg 10: [mem 0xfeb4a000-0xfeb4afff]
    [ 0.248150] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    [ 0.248175] pci 0000:00:13.2: reg 10: [mem 0xfeb49000-0xfeb490ff]
    [ 0.248289] pci 0000:00:13.2: supports D1 D2
    [ 0.248292] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.248325] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    [ 0.248433] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    [ 0.248461] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
    [ 0.248548] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.248571] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    [ 0.248673] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    [ 0.248732] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    [ 0.248750] pci 0000:00:14.5: reg 10: [mem 0xfeb48000-0xfeb48fff]
    [ 0.248848] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
    [ 0.248953] pci 0000:00:15.0: supports D1 D2
    [ 0.248991] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
    [ 0.249095] pci 0000:00:15.1: supports D1 D2
    [ 0.249133] pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
    [ 0.249237] pci 0000:00:15.2: supports D1 D2
    [ 0.249282] pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
    [ 0.249387] pci 0000:00:15.3: supports D1 D2
    [ 0.249426] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
    [ 0.249474] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
    [ 0.249518] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
    [ 0.249564] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
    [ 0.249621] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
    [ 0.249665] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
    [ 0.249711] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
    [ 0.249755] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
    [ 0.249928] pci 0000:00:04.0: PCI bridge to [bus 01]
    [ 0.250055] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
    [ 0.250067] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.250070] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.250074] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.250077] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.250080] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.250083] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.250086] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.250216] pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000
    [ 0.250259] pci 0000:03:00.0: reg 10: [mem 0xfea00000-0xfea03fff 64bit]
    [ 0.250422] pci 0000:03:00.0: supports D1 D2
    [ 0.250425] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
    [ 0.252383] pci 0000:00:15.0: PCI bridge to [bus 03]
    [ 0.252400] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.252481] pci 0000:00:15.1: PCI bridge to [bus 04]
    [ 0.252587] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.252610] pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
    [ 0.252649] pci 0000:05:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 0.252674] pci 0000:05:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 0.252777] pci 0000:05:00.0: supports D1 D2
    [ 0.252780] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.254339] pci 0000:00:15.2: PCI bridge to [bus 05]
    [ 0.254353] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
    [ 0.254369] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.254451] pci 0000:00:15.3: PCI bridge to [bus 06]
    [ 0.254501] pci_bus 0000:00: on NUMA node 0
    [ 0.254602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
    [ 0.254674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
    [ 0.254726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
    [ 0.254777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE23._PRT]
    [ 0.254856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
    [ 0.254913] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.254916] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.259554] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
    [ 0.259704] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
    [ 0.259814] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
    [ 0.259920] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
    [ 0.260007] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
    [ 0.260075] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
    [ 0.260142] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
    [ 0.260210] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
    [ 0.260719] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.260732] vgaarb: loaded
    [ 0.260733] vgaarb: bridge control possible 0000:00:01.0
    [ 0.261239] ACPI: bus type usb registered
    [ 0.261372] usbcore: registered new interface driver usbfs
    [ 0.261438] usbcore: registered new interface driver hub
    [ 0.261565] usbcore: registered new device driver usb
    [ 0.262092] PCI: Using ACPI for IRQ routing
    [ 0.273018] PCI: pci_cache_line_size set to 64 bytes
    [ 0.273142] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
    [ 0.273146] e820: reserve RAM buffer [mem 0xafaf7000-0xafffffff]
    [ 0.273149] e820: reserve RAM buffer [mem 0xafb54000-0xafffffff]
    [ 0.273151] e820: reserve RAM buffer [mem 0xafd47000-0xafffffff]
    [ 0.273154] e820: reserve RAM buffer [mem 0xaff00000-0xafffffff]
    [ 0.273543] NetLabel: Initializing
    [ 0.273546] NetLabel: domain hash size = 128
    [ 0.273547] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.273565] NetLabel: unlabeled traffic allowed by default
    [ 0.273680] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.273687] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.275723] Switching to clocksource hpet
    [ 0.281493] pnp: PnP ACPI init
    [ 0.281511] ACPI: bus type pnp registered
    [ 0.281854] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.281861] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.282965] system 00:01: [io 0x040b] has been reserved
    [ 0.282969] system 00:01: [io 0x04d6] has been reserved
    [ 0.282972] system 00:01: [io 0x0c00-0x0c01] has been reserved
    [ 0.282979] system 00:01: [io 0x0c14] has been reserved
    [ 0.282984] system 00:01: [io 0x0c50-0x0c51] has been reserved
    [ 0.282987] system 00:01: [io 0x0c52] has been reserved
    [ 0.282990] system 00:01: [io 0x0c6c] has been reserved
    [ 0.282994] system 00:01: [io 0x0c6f] has been reserved
    [ 0.282997] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.283000] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.283004] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.283007] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.283010] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.283014] system 00:01: [io 0x0800-0x089f] has been reserved
    [ 0.283017] system 00:01: [io 0x0b20-0x0b3f] has been reserved
    [ 0.283020] system 00:01: [io 0x0900-0x090f] has been reserved
    [ 0.283024] system 00:01: [io 0x0910-0x091f] has been reserved
    [ 0.283027] system 00:01: [io 0xfe00-0xfefe] has been reserved
    [ 0.283033] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.283037] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.283041] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
    [ 0.283045] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
    [ 0.283049] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
    [ 0.283054] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
    [ 0.283057] system 00:01: [mem 0xffe00000-0xffffffff] has been reserved
    [ 0.283062] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.283085] pnp 00:02: [dma 4]
    [ 0.283236] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.283356] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.283484] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.283686] system 00:05: [io 0x04d0-0x04d1] has been reserved
    [ 0.283691] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.283937] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.284106] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.284264] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.284487] pnp 00:09: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active)
    [ 0.285108] system 00:0a: [mem 0xb0000000-0xbfffffff] has been reserved
    [ 0.285113] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.297800] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.297811] pnp: PnP ACPI: found 12 devices
    [ 0.297813] ACPI: ACPI bus type pnp unregistered
    [ 0.303106] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 0.303114] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 0.303119] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [ 0.303173] pci 0000:00:15.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 0.303178] pci 0000:00:15.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    [ 0.303192] pci 0000:00:15.1: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
    [ 0.303196] pci 0000:00:15.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
    [ 0.303200] pci 0000:00:15.1: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
    [ 0.303213] pci 0000:00:15.2: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 400000
    [ 0.303226] pci 0000:00:15.3: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000
    [ 0.303230] pci 0000:00:15.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000
    [ 0.303234] pci 0000:00:15.3: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000
    [ 0.303253] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.303257] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.303261] pci 0000:00:15.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.303264] pci 0000:00:15.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.303268] pci 0000:00:15.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.303271] pci 0000:00:15.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
    [ 0.303275] pci 0000:00:15.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.303278] pci 0000:00:15.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.303281] pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.303285] pci 0000:00:15.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.303288] pci 0000:00:15.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.303291] pci 0000:00:15.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.303300] pci 0000:00:04.0: BAR 14: assigned [mem 0xd0100000-0xd02fffff]
    [ 0.303305] pci 0000:00:04.0: BAR 15: assigned [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.303310] pci 0000:00:15.0: BAR 15: assigned [mem 0xd0500000-0xd06fffff 64bit pref]
    [ 0.303315] pci 0000:00:15.1: BAR 14: assigned [mem 0xd0700000-0xd08fffff]
    [ 0.303320] pci 0000:00:15.1: BAR 15: assigned [mem 0xd0900000-0xd0afffff 64bit pref]
    [ 0.303324] pci 0000:00:15.2: BAR 14: assigned [mem 0xd0b00000-0xd0efffff]
    [ 0.303328] pci 0000:00:15.3: BAR 14: assigned [mem 0xd0f00000-0xd10fffff]
    [ 0.303332] pci 0000:00:15.3: BAR 15: assigned [mem 0xd1100000-0xd12fffff 64bit pref]
    [ 0.303339] pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.303345] pci 0000:00:15.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.303349] pci 0000:00:15.1: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.303354] pci 0000:00:15.3: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.303361] pci 0000:00:04.0: PCI bridge to [bus 01]
    [ 0.303367] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
    [ 0.303373] pci 0000:00:04.0: bridge window [mem 0xd0100000-0xd02fffff]
    [ 0.303378] pci 0000:00:04.0: bridge window [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.303385] pci 0000:00:14.4: PCI bridge to [bus 02]
    [ 0.303470] pci 0000:00:15.0: PCI bridge to [bus 03]
    [ 0.303474] pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
    [ 0.303481] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.303487] pci 0000:00:15.0: bridge window [mem 0xd0500000-0xd06fffff 64bit pref]
    [ 0.303495] pci 0000:00:15.1: PCI bridge to [bus 04]
    [ 0.303499] pci 0000:00:15.1: bridge window [io 0x3000-0x3fff]
    [ 0.303506] pci 0000:00:15.1: bridge window [mem 0xd0700000-0xd08fffff]
    [ 0.303512] pci 0000:00:15.1: bridge window [mem 0xd0900000-0xd0afffff 64bit pref]
    [ 0.303521] pci 0000:00:15.2: PCI bridge to [bus 05]
    [ 0.303525] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
    [ 0.303532] pci 0000:00:15.2: bridge window [mem 0xd0b00000-0xd0efffff]
    [ 0.303537] pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.303545] pci 0000:00:15.3: PCI bridge to [bus 06]
    [ 0.303549] pci 0000:00:15.3: bridge window [io 0x4000-0x4fff]
    [ 0.303557] pci 0000:00:15.3: bridge window [mem 0xd0f00000-0xd10fffff]
    [ 0.303562] pci 0000:00:15.3: bridge window [mem 0xd1100000-0xd12fffff 64bit pref]
    [ 0.303627] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.303631] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.303634] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.303637] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.303640] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.303643] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.303647] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.303650] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
    [ 0.303653] pci_bus 0000:01: resource 1 [mem 0xd0100000-0xd02fffff]
    [ 0.303656] pci_bus 0000:01: resource 2 [mem 0xd0300000-0xd04fffff 64bit pref]
    [ 0.303660] pci_bus 0000:02: resource 4 [io 0x0000-0x03af]
    [ 0.303663] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7]
    [ 0.303666] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df]
    [ 0.303669] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff]
    [ 0.303672] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.303675] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.303678] pci_bus 0000:02: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.303681] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    [ 0.303684] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.303687] pci_bus 0000:03: resource 2 [mem 0xd0500000-0xd06fffff 64bit pref]
    [ 0.303691] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    [ 0.303693] pci_bus 0000:04: resource 1 [mem 0xd0700000-0xd08fffff]
    [ 0.303752] pci_bus 0000:04: resource 2 [mem 0xd0900000-0xd0afffff 64bit pref]
    [ 0.303755] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
    [ 0.303758] pci_bus 0000:05: resource 1 [mem 0xd0b00000-0xd0efffff]
    [ 0.303761] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.303765] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
    [ 0.303768] pci_bus 0000:06: resource 1 [mem 0xd0f00000-0xd10fffff]
    [ 0.303771] pci_bus 0000:06: resource 2 [mem 0xd1100000-0xd12fffff 64bit pref]
    [ 0.303836] NET: Registered protocol family 2
    [ 0.304049] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.304316] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [ 0.304574] TCP: Hash tables configured (established 32768 bind 32768)
    [ 0.304683] TCP: reno registered
    [ 0.304693] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.304845] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.305013] NET: Registered protocol family 1
    [ 0.305042] pci 0000:00:01.0: Boot video device
    [ 0.305384] PCI: CLS 64 bytes, default 64
    [ 0.305471] Unpacking initramfs...
    [ 0.400016] Freeing initrd memory: 2664k freed
    [ 0.401721] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.401733] software IO TLB [mem 0xabaf7000-0xafaf7000] (64MB) mapped at [ffff8800abaf7000-ffff8800afaf6fff]
    [ 0.401984] LVT offset 0 assigned for vector 0x400
    [ 0.402067] perf: AMD IBS detected (0x000000ff)
    [ 0.402950] audit: initializing netlink socket (disabled)
    [ 0.402971] type=2000 audit(1367137456.294:1): initialized
    [ 0.403912] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.410965] VFS: Disk quotas dquot_6.5.2
    [ 0.411207] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.411535] msgmni has been set to 7393
    [ 0.412281] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.412285] io scheduler noop registered
    [ 0.412287] io scheduler deadline registered
    [ 0.412295] io scheduler cfq registered
    [ 0.412435] io scheduler bfq registered (default)
    [ 0.413822] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
    [ 0.415487] Linux agpgart interface v0.103
    [ 0.415820] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.415822] vesafb: scrolling: redraw
    [ 0.415826] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.416298] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010100000, using 3072k, total 3072k
    [ 0.477778] Console: switching to colour frame buffer device 128x48
    [ 0.530645] fb0: VESA VGA frame buffer device
    [ 0.530917] ACPI: acpi_idle registered with cpuidle
    [ 0.557297] GHES: HEST is not enabled!
    [ 0.557305] XENFS: not registering filesystem on non-xen platform
    [ 0.557737] libphy: Fixed MDIO Bus: probed
    [ 0.557999] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PSM1] at 0x60,0x64 irq 1,12
    [ 0.561580] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.561601] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.562037] mousedev: PS/2 mouse device common for all mice
    [ 0.562175] cpuidle: using governor ladder
    [ 0.562284] cpuidle: using governor menu
    [ 0.562288] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.562699] TCP: vegas registered
    [ 0.562701] TCP: yeah registered
    [ 0.562786] Key type dns_resolver registered
    [ 0.563728] registered taskstats version 1
    [ 0.564483] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.564936] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
    [ 0.566831] acpi-cpufreq: overriding BIOS provided _PSD data
    [ 0.567786] Freeing unused kernel memory: 640k freed
    [ 0.568164] CFS CPU scheduler.
    [ 0.584465] systemd-udevd[507]: starting version 202
    [ 0.653357] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.655531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.655963] ehci-pci: EHCI PCI platform driver
    [ 0.656097] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 0.656109] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
    [ 0.656128] QUIRK: Enable AMD PLL fix
    [ 0.656224] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4c000
    [ 0.657747] SCSI subsystem initialized
    [ 0.661333] ACPI: bus type scsi registered
    [ 0.665103] libata version 3.00 loaded.
    [ 0.711249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
    [ 0.711257] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.711260] usb usb1: Product: OHCI Host Controller
    [ 0.711263] usb usb1: Manufacturer: Linux 3.8.8-1-lqx ohci_hcd
    [ 0.711266] usb usb1: SerialNumber: 0000:00:12.0
    [ 0.711963] hub 1-0:1.0: USB hub found
    [ 0.711978] hub 1-0:1.0: 5 ports detected
    [ 0.712324] ehci-pci 0000:00:12.2: EHCI Host Controller
    [ 0.712335] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2
    [ 0.712343] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.712361] ehci-pci 0000:00:12.2: debug port 1
    [ 0.712428] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4b000
    [ 0.718188] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 0.718242] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [ 0.718249] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.718255] usb usb2: Product: EHCI Host Controller
    [ 0.718260] usb usb2: Manufacturer: Linux 3.8.8-1-lqx ehci_hcd
    [ 0.718264] usb usb2: SerialNumber: 0000:00:12.2
    [ 0.718762] hub 2-0:1.0: USB hub found
    [ 0.718770] hub 2-0:1.0: 5 ports detected
    [ 0.719034] ehci-pci 0000:00:13.2: EHCI Host Controller
    [ 0.719043] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
    [ 0.719061] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 0.719099] ehci-pci 0000:00:13.2: debug port 1
    [ 0.719142] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb49000
    [ 0.725166] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 0.725211] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [ 0.725218] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.725224] usb usb3: Product: EHCI Host Controller
    [ 0.725230] usb usb3: Manufacturer: Linux 3.8.8-1-lqx ehci_hcd
    [ 0.725235] usb usb3: SerialNumber: 0000:00:13.2
    [ 0.725648] hub 3-0:1.0: USB hub found
    [ 0.725656] hub 3-0:1.0: 5 ports detected
    [ 0.725886] ahci 0000:00:11.0: version 3.0
    [ 0.726156] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    [ 0.726162] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    [ 0.730354] scsi0 : ahci
    [ 0.730816] scsi1 : ahci
    [ 0.731197] scsi2 : ahci
    [ 0.731481] scsi3 : ahci
    [ 0.731816] scsi4 : ahci
    [ 0.732139] scsi5 : ahci
    [ 0.732460] ata1: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d100 irq 19
    [ 0.732464] ata2: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d180 irq 19
    [ 0.732468] ata3: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d200 irq 19
    [ 0.732471] ata4: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d280 irq 19
    [ 0.732475] ata5: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d300 irq 19
    [ 0.732478] ata6: SATA max UDMA/133 abar m1024@0xfeb4d000 port 0xfeb4d380 irq 19
    [ 0.732661] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 0.732683] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
    [ 0.732720] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4a000
    [ 0.787137] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
    [ 0.787142] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.787145] usb usb4: Product: OHCI Host Controller
    [ 0.787148] usb usb4: Manufacturer: Linux 3.8.8-1-lqx ohci_hcd
    [ 0.787151] usb usb4: SerialNumber: 0000:00:13.0
    [ 0.787659] hub 4-0:1.0: USB hub found
    [ 0.787670] hub 4-0:1.0: 5 ports detected
    [ 0.787909] ohci_hcd 0000:00:14.5: OHCI Host Controller
    [ 0.787918] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
    [ 0.787944] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb48000
    [ 0.842042] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [ 0.842046] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.842049] usb usb5: Product: OHCI Host Controller
    [ 0.842052] usb usb5: Manufacturer: Linux 3.8.8-1-lqx ohci_hcd
    [ 0.842054] usb usb5: SerialNumber: 0000:00:14.5
    [ 0.842401] hub 5-0:1.0: USB hub found
    [ 0.842410] hub 5-0:1.0: 2 ports detected
    [ 1.036735] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.036809] ata3: SATA link down (SStatus 0 SControl 300)
    [ 1.037712] ata5: SATA link down (SStatus 0 SControl 300)
    [ 1.037754] ata4: SATA link down (SStatus 0 SControl 300)
    [ 1.037797] ata6: SATA link down (SStatus 0 SControl 300)
    [ 1.121601] usb 2-5: new high-speed USB device number 3 using ehci-pci
    [ 1.191503] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.197711] ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2AR10002, max UDMA/133
    [ 1.197719] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.203906] ata1.00: configured for UDMA/133
    [ 1.204335] scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5
    [ 1.212034] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 1.212041] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [ 1.212125] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.212130] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.212166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.239240] usb 2-5: New USB device found, idVendor=12d1, idProduct=1506
    [ 1.239251] usb 2-5: New USB device strings: Mfr=4, Product=3, SerialNumber=0
    [ 1.239257] usb 2-5: Product: HUAWEI Mobile
    [ 1.239263] usb 2-5: Manufacturer: Huawei Technologies
    [ 1.239601] sda: sda1 sda2 sda3 sda4
    [ 1.241058] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.248373] Initializing USB Mass Storage driver...
    [ 1.248653] scsi6 : usb-storage 2-5:1.5
    [ 1.249032] scsi7 : usb-storage 2-5:1.6
    [ 1.250887] usbcore: registered new interface driver usb-storage
    [ 1.250892] USB Mass Storage support registered.
    [ 1.346272] usb 3-4: new high-speed USB device number 2 using ehci-pci
    [ 1.402164] tsc: Refined TSC clocksource calibration: 1646.493 MHz
    [ 1.402180] Switching to clocksource tsc
    [ 1.463721] usb 3-4: New USB device found, idVendor=2232, idProduct=1020
    [ 1.463730] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 1.463737] usb 3-4: Product: WebCam SC-0311139N
    [ 1.463743] usb 3-4: Manufacturer: Image Processor
    [ 1.463748] usb 3-4: SerialNumber: SM3711
    [ 1.690741] usb 1-3: new full-speed USB device number 2 using ohci_hcd
    [ 1.847612] usb 1-3: New USB device found, idVendor=0a5c, idProduct=219c
    [ 1.847624] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 1.847631] usb 1-3: Product: Broadcom BCM2070 Bluetooth Device
    [ 1.847637] usb 1-3: Manufacturer: Broadcom Corp
    [ 1.847642] usb 1-3: SerialNumber: 30144A229E4B
    [ 2.058659] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.250157] scsi 6:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
    [ 2.250876] scsi 7:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2
    [ 2.302154] sd 7:0:0:0: [sdb] Attached SCSI removable disk
    [ 2.827197] systemd[1]: systemd 202 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 3.065305] systemd[1]: Inserted module 'autofs4'
    [ 3.083044] systemd[1]: Set hostname to <REM>.
    [ 3.104478] systemd[1]: /etc/mtab is not a symlink or not pointing to /proc/self/mounts. This is not supported anymore. Please make sure to replace this file by a symlink to avoid incorrect or misleading mount(8) output.
    [ 3.673989] systemd[1]: logged here: 'Support for option SysVStartPriority= has been disabled at compile time and is ignored': 0
    [ 3.928323] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.928445] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.928473] systemd[1]: Starting Remote File Systems.
    [ 3.928499] systemd[1]: Reached target Remote File Systems.
    [ 3.928520] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.928571] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.928589] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.928636] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.928654] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.928708] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.928727] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.928777] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.928798] systemd[1]: Starting Encrypted Volumes.
    [ 3.928818] systemd[1]: Reached target Encrypted Volumes.
    [ 3.928949] systemd[1]: Starting udev Kernel Socket.
    [ 3.928994] systemd[1]: Listening on udev Kernel Socket.
    [ 3.929083] systemd[1]: Starting udev Control Socket.
    [ 3.929127] systemd[1]: Listening on udev Control Socket.
    [ 3.929179] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.929401] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.929433] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.929511] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.929537] systemd[1]: Starting Journal Socket.
    [ 3.929627] systemd[1]: Listening on Journal Socket.
    [ 3.929668] systemd[1]: Mounting Debug File System...
    [ 3.941501] systemd[1]: Starting Setup Virtual Console...
    [ 3.948777] systemd[1]: Starting udev Coldplug all Devices...
    [ 4.302692] systemd[1]: Started Set Up Additional Binary Formats.
    [ 4.302896] systemd[1]: Starting Create static device nodes in /dev...
    [ 4.311080] systemd[1]: Mounting Huge Pages File System...
    [ 4.333926] systemd[1]: Starting Apply Kernel Variables...
    [ 4.344029] systemd[1]: Starting Journal Service...
    [ 4.354053] systemd[1]: Started Journal Service.
    [ 4.354159] systemd[1]: Mounting POSIX Message Queue File System...
    [ 4.398484] systemd[1]: Starting Load Kernel Modules...
    [ 4.405897] systemd[1]: Expecting device dev-sda2.device...
    [ 4.405958] systemd[1]: Started File System Check on Root Device.
    [ 4.405985] systemd[1]: Mounting Temporary Directory...
    [ 4.444783] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 5.141813] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=15
    [ 5.523573] vboxdrv: Found 2 processor cores.
    [ 5.523876] vboxdrv: fAsync=0 offMin=0x37b offMax=0x21cc
    [ 5.524228] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 5.524230] vboxdrv: Successfully loaded version 4.2.12_OSE (interface 0x001a0004).
    [ 5.585084] systemd-udevd[1417]: starting version 202
    [ 6.551072] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
    [ 6.551149] ACPI: Lid Switch [LID]
    [ 6.551279] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 6.551286] ACPI: Power Button [PWRB]
    [ 6.551432] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
    [ 6.551436] ACPI: Sleep Button [SLPB]
    [ 6.551556] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 6.551560] ACPI: Power Button [PWRF]
    [ 6.557442] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.570168] ACPI: AC Adapter [ADP1] (on-line)
    [ 6.576119] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    [ 6.581379] acpi device:31: registered as cooling_device2
    [ 6.581414] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
    [ 6.581535] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5
    [ 6.685232] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.685246] ACPI: Battery Slot [BAT1] (battery present)
    [ 6.830273] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 6.830383] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 7.576782] [drm] Initialized drm 1.1.0 20060810
    [ 7.618495] [drm] VGACON disable radeon kernel modesetting.
    [ 7.620005] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 7.620007] [drm] No driver support for vblank timestamp query.
    [ 7.620012] [drm] Initialized radeon 1.33.0 20080528 for 0000:00:01.0 on minor 0
    [ 7.767784] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 7.767790] Disabling lock debugging due to kernel taint
    [ 7.783921] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3540 MBytes.
    [ 7.784096] <6>[fglrx] vendor: 1002 device: 9806 count: 1
    [ 7.784621] <6>[fglrx] ioport: bar 1, base 0xf000, size: 0x100
    [ 7.785024] <6>[fglrx] Kernel PAT support is enabled
    [ 7.785057] <6>[fglrx] module loaded - fglrx 9.1.11 [Dec 19 2012] with 1 minors
    [ 8.571990] Adding 4194300k swap on /dev/sda2. Priority:-1 extents:1 across:4194300k
    [ 10.299762] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 10.935682] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00)
    [ 10.950057] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x16, 0x0a.
    [ 11.022649] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
    [ 11.032941] microcode: CPU0: patch_level=0x05000101
    [ 14.667774] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 14.684494] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
    [ 14.684678] sp5100_tco: PCI Revision ID: 0x42
    [ 14.684818] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
    [ 14.684869] sp5100_tco: Last reboot was not triggered by watchdog.
    [ 14.685016] sp5100_tco: initialized (0xffffc9000003eb00). heartbeat=60 sec (nowayout=0)
    [ 14.913699] systemd-logind[1501]: Watching system buttons on /dev/input/event1 (Lid Switch)
    [ 14.914754] systemd-logind[1501]: Watching system buttons on /dev/input/event2 (Power Button)
    [ 14.915967] systemd-logind[1501]: Watching system buttons on /dev/input/event3 (Sleep Button)
    [ 14.916946] systemd-logind[1501]: Watching system buttons on /dev/input/event4 (Power Button)
    [ 14.925385] systemd-logind[1501]: Watching system buttons on /dev/input/event5 (Video Bus)
    [ 14.993314] microcode: failed to load file amd-ucode/microcode_amd.bin
    [ 14.993343] microcode: CPU1: patch_level=0x05000101
    [ 14.994827] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 15.200573] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 15.200964] r8169 0000:05:00.0: irq 40 for MSI/MSI-X
    [ 15.204405] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000034000, 50:b7:c3:02:d7:05, XID 0c900800 IRQ 40
    [ 15.204413] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 15.290455] systemd-udevd[1420]: renamed network interface eth0 to enp5s0
    [ 15.292678] systemd-sysctl[2033]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    [ 15.404438] samsung_laptop: detected SABI interface: SwSmi@
    [ 15.404444] samsung_laptop: Backlight controlled by ACPI video driver
    [ 15.452716] fglrx_pci 0000:00:01.0: irq 41 for MSI/MSI-X
    [ 15.453760] <6>[fglrx] Firegl kernel thread PID: 2044
    [ 15.453957] <6>[fglrx] Firegl kernel thread PID: 2045
    [ 15.454361] <6>[fglrx] Firegl kernel thread PID: 2046
    [ 15.454513] <6>[fglrx] IRQ 41 Enabled
    [ 15.459141] <6>[fglrx] Gart USWC size:1156 M.
    [ 15.459145] <6>[fglrx] Gart cacheable size:458 M.
    [ 15.459152] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
    [ 15.459154] <6>[fglrx] Reserved FB block: Unshared offset:fc54000, size:3a0000
    [ 15.459157] <6>[fglrx] Reserved FB block: Unshared offset:fff4000, size:c000
    [ 15.461998] systemd-sysctl[2047]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    [ 15.698292] <6>[fglrx] ATIF platform detected with notification ID: 0x81
    [ 16.424442] kvm: Nested Virtualization enabled
    [ 16.424448] kvm: Nested Paging enabled
    [ 16.499708] cfg80211: Calling CRDA to update world regulatory domain
    [ 16.716267] Bluetooth: Core ver 2.16
    [ 16.718230] NET: Registered protocol family 31
    [ 16.718232] Bluetooth: HCI device and connection manager initialized
    [ 16.718245] Bluetooth: HCI socket layer initialized
    [ 16.718249] Bluetooth: L2CAP socket layer initialized
    [ 16.718259] Bluetooth: SCO socket layer initialized
    [ 16.733212] media: Linux media interface: v0.10
    [ 16.782160] lib80211: common routines for IEEE802.11 drivers
    [ 16.782166] lib80211_crypt: registered algorithm 'NULL'
    [ 16.784149] Linux video capture interface: v2.00
    [ 16.815091] usbcore: registered new interface driver usbserial
    [ 16.816124] usbcore: registered new interface driver usbserial_generic
    [ 16.817094] usbserial: USB Serial support registered for generic
    [ 16.906678] usbcore: registered new interface driver option
    [ 16.909342] usbserial: USB Serial support registered for GSM modem (1-port)
    [ 16.909431] option 2-5:1.0: GSM modem (1-port) converter detected
    [ 16.912145] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB0
    [ 16.912225] option 2-5:1.3: GSM modem (1-port) converter detected
    [ 16.915130] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB1
    [ 16.915190] option 2-5:1.4: GSM modem (1-port) converter detected
    [ 16.921982] usb 2-5: GSM modem (1-port) converter now attached to ttyUSB2
    [ 16.986926] systemd-udevd[1427]: error opening ATTR{/sys/devices/pci0000:00/0000:00:12.2/usb2/2-5/2-5:1.5/host6/scsi_host/host6/link_power_management_policy} for writing: No such file or directory
    [ 16.988089] uvcvideo: Found UVC 1.00 device WebCam SC-0311139N (2232:1020)
    [ 16.993277] systemd-udevd[1428]: error opening ATTR{/sys/devices/pci0000:00/0000:00:12.2/usb2/2-5/2-5:1.6/host7/scsi_host/host7/link_power_management_policy} for writing: No such file or directory
    [ 17.002663] input: WebCam SC-0311139N as /devices/pci0000:00/0000:00:13.2/usb3/3-4/3-4:1.0/input/input8
    [ 17.011802] usbcore: registered new interface driver uvcvideo
    [ 17.011808] USB Video Class driver (1.1.1)
    [ 17.036157] snd_hda_intel 0000:00:01.1: irq 42 for MSI/MSI-X
    [ 17.055032] usbcore: registered new interface driver cdc_wdm
    [ 17.076782] qmi_wwan 2-5:1.1: cdc-wdm0: USB WDM device
    [ 17.085492] qmi_wwan 2-5:1.1 wwan0: register 'qmi_wwan' at usb-0000:00:12.2-5, WWAN/QMI device, 02:50:f3:00:00:00
    [ 17.088340] usbcore: registered new interface driver qmi_wwan
    [ 17.173910] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
    [ 17.402599] INFO @wl_cfg80211_attach : Registered CFG80211 phy
    [ 17.546699] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
    [ 17.549997] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
    [ 17.554480] lib80211_crypt: registered algorithm 'TKIP'
    [ 17.557087] eth0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.112
    [ 17.587070] sr0: scsi-1 drive
    [ 17.587077] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 17.590908] sr 6:0:0:0: Attached scsi CD-ROM sr0
    [ 17.764781] systemd-udevd[1426]: renamed network interface wwan0 to wwp0s18f2u5i1
    [ 17.767245] systemd-sysctl[2747]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    [ 17.772802] systemd-udevd[1427]: renamed network interface eth0 to wlp3s0
    [ 17.776265] systemd-sysctl[2756]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    [ 17.780048] systemd-sysctl[2755]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    [ 17.786438] systemd-sysctl[2759]: Duplicate assignment of kernel/sysrq in file '/usr/lib/sysctl.d/50-default.conf', ignoring.
    [ 18.086526] usbcore: registered new interface driver btusb
    [ 18.769655] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880136590af8 (20121018/exresop-422)
    [ 18.769669] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
    [ 18.769676] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013b4343e8), AE_AML_OPERAND_TYPE (20121018/psparse-537)
    [ 18.769691] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013b434168), AE_AML_OPERAND_TYPE (20121018/psparse-537)
    [ 20.495319] vboxpci: IOMMU not found (not registered)
    [ 22.447778] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 22.447784] Bluetooth: BNEP filters: protocol multicast
    [ 22.447799] Bluetooth: BNEP socket layer initialized
    [ 22.595480] Bluetooth: RFCOMM TTY layer initialized
    [ 22.595500] Bluetooth: RFCOMM socket layer initialized
    [ 22.595502] Bluetooth: RFCOMM ver 1.11
    [ 24.407804] r8169 0000:05:00.0 enp5s0: link down
    [ 24.815261] NET: Registered protocol family 10
    [ 24.815665] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
    [ 31.811205] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=15,commit=0
    [ 32.023742] WARNING! power/level is deprecated; use power/control instead
    [ 162.594332] fuse init (API version 7.20)
    [ 181.712247] xfce4-session[4386]: segfault at ffffffff00000000 ip 00007fe7c8be9537 sp 00007fffd9c3f2e0 error 5 in libglib-2.0.so.0.3600.1[7fe7c8b86000+fc000]
    [ 183.784141] <6>[fglrx] ATIF platform detected with notification ID: 0x81
    [ 184.997887] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff88013aae2948 (20121018/exresop-422)
    [ 184.997901] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
    [ 184.997908] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013b4343e8), AE_AML_OPERAND_TYPE (20121018/psparse-537)
    [ 184.997923] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013b434168), AE_AML_OPERAND_TYPE (20121018/psparse-537)
    [ 405.815701] NET: Registered protocol family 17
    [ 1429.517360] xfce4-session[5257]: segfault at ffffffff00000000 ip 00007f53c2ee6537 sp 00007fff6060c2d0 error 5 in libglib-2.0.so.0.3600.1[7f53c2e83000+fc000]
    [ 1430.198201] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=15,commit=600
    [ 1431.620829] EXT4-fs (sda3): re-mounted. Opts: data=ordered,commit=600,commit=600
    [ 1432.769216] <6>[fglrx] ATIF platform detected with notification ID: 0x81
    [ 1434.176644] ACPI Error: Needed [Integer/String/Buffer], found [Reference] ffff880136590360 (20121018/exresop-422)
    [ 1434.176667] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20121018/dswexec-460)
    [ 1434.176680] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.AF03] (Node ffff88013b4343e8), AE_AML_OPERAND_TYPE (20121018/psparse-537)
    [ 1434.176709] ACPI Error: Method parse/execution failed [\_SB_.PCI0.VGA_.ATIF] (Node ffff88013b434168), AE_AML_OPERAND_TYPE (20121018/psparse-537)
    [ 1477.326788] usb 1-3: USB disconnect, device number 2
    Any help appreciated.
    Last edited by NinjaBus (2013-04-28 09:12:19)

    hadrons123 wrote:does it happen if you use the default arch kernel?
    Yes, it keeps happening even with the default kernel when I try to shut down/suspend the computer (Alt-F4 key combination). I've read on some russian forum that it's the problem in recently upgraded glib2 (as they think), however downgrade didn't help. I'll try to check whether xfce4-session is to blame.
    EDIT: It's definitely not xfce4-session, I tried previous version. Also, while running downgrade I saw that there is a newer version of glib2 in ARM, which is much more unstable, so I'm using 2.36.1-1.
    Last edited by NinjaBus (2013-04-28 15:49:59)

  • Xfce4-power-manager and laptop-mode-tools + backlight problems.

    Cross posted from here: https://bbs.archlinux.org/viewtopic.php?id=127992
    I don't know which forum it belongs to, so maybe a mod can close the one in the wrong forum.
    Out of curiosity, do these two tools conflict with each other? There seems to be some features that do the same thing, ie harddrive spin down time, but I'm not sure if these two will try to kill each other trying to configure the same power settings. If they do conflict, how could I go about disabling the conflicting parts (on either)? laptop-mode-tools claims it needs acpid "for ACPI support", however, acpid seems to be grabbing the standby event and throwing the laptop in standby despite the standby button bound to do nothing in xfce-power-manager. If I take out acpid, does that mean laptop-mode will no longer detect acpi events such as connecting/disconnecting AC power and thus not change modes when its plugged in?
    Another problem I've had after installing xfce4-power-manager is that when I use the brightness hotkeys the backlight gets stuck and starts flashing, locking up the system until I force shutdown. However, I can use the brightness plugin without trouble at all. What's causing the power manager to screw up setting the brightness since it clearly seems to work otherwise.

    It is easier to close this one and move the other thread over here. Just continue there.
    BTW better use the Report button when you want to have a thread of yours moved to another forum. That way it is guaranteed a mod will see this in time. And you never need to cross post.

  • Problem running xfce4 with xdm

    G'day,
    I'm trying to get xdm happening but I'm having some problems.
    After searching the forums I created a ~/.xsession file with the same content as my working ~.xinitrc and changed the runtime in inittab.
    After rebooting login in xdm doesn't work. I just keep returning to the login screen.
    Checking out my ~/.xsession-errors file, I have
    /home/mctavish/.xsession: line 5: exec: startxfce4: not found
    It works if I use the full path - but then of course falls down when startxfce4 tries to call xfwm4 and so on. So it looks like a path problem.
    I know that the /opt/xfce4/bin path is setup in /etc/profile.d/xfce4.sh, which is called from /etc/profile.
    Note too that I have never had any problems using startx to get xfce4 up and running.
    So it seems to me that somehow /etc/profile is not being called (or whatever) when I use xdm. Is this crazy talk? In fact /etc/profile is not executable, so how it normally run and from where?
    Of course I could just use gdm but the pain of having all those unnecessary gnomish packages on my system would be unbearable.

    Try this /etc/X11/xdm/Xresources
    ! $Xorg: Xresources,v 1.3 2000/08/17 19:54:17 cpqbld Exp $
    ! $XFree86: xc/programs/xdm/config/Xres.cpp,v 1.7 2003/11/15 03:25:22 dawes Exp $
    xlogin*login.translations: #override
    Ctrl<Key>R: abort-display()n
    <Key>F1: set-session-argument(failsafe) finish-field()n
    <Key>Delete: delete-character()n
    <Key>Left: move-backward-character()n
    <Key>Right: move-forward-character()n
    <Key>Home: move-to-begining()n
    <Key>End: move-to-end()n
    Ctrl<Key>KP_Enter: set-session-argument(failsafe) finish-field()n
    <Key>KP_Enter: set-session-argument() finish-field()n
    Ctrl<Key>Return: set-session-argument(failsafe) finish-field()n
    <Key>Return: set-session-argument() finish-field()
    xlogin*greeting: Welcome to CLIENTHOST
    xlogin*namePrompt: Login:
    xlogin*fail: Login incorrect
    #if WIDTH > 800
    xlogin*greetFont: -adobe-helvetica-bold-r-normal--12-120-75-75-m-70-iso8859-1
    xlogin*font: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
    xlogin*promptFont: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
    xlogin*failFont: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
    #else
    xlogin*greetFont: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
    xlogin*font: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
    xlogin*promptFont: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
    xlogin*failFont: -adobe-helvetica-medium-r-normal--12-120-75-75-m-70-iso8859-1
    #endif
    #ifdef COLOR
    xlogin*borderWidth: 1
    xlogin*frameWidth: 1
    xlogin*innerFramesWidth: 1
    xlogin*shdColor: grey30
    xlogin*hiColor: grey90
    xlogin*background: #f5f5f5
    xlogin*foreground: darkgreen
    xlogin*greetColor: #6c83b0
    xlogin*failColor: red
    *Foreground: black
    *Background: #fffff0
    #else
    xlogin*borderWidth: 1
    xlogin*frameWidth: 0
    xlogin*innerFramesWidth: 1
    xlogin*shdColor: black
    xlogin*hiColor: black
    #endif
    #if PLANES >= 8
    xlogin*logoFileName: /usr/X11R6/lib/X11/xdm/pixmaps/archlinux.xpm
    #endif
    xlogin*useShape: true
    xlogin*logoPadding: 10
    XConsole.text.geometry: 480x130
    XConsole.verbose: true
    XConsole*iconic: true
    XConsole*font: fixed
    Chooser*geometry: 700x500+300+200
    Chooser*allowShellResize: false
    Chooser*viewport.forceBars: true
    Chooser*label.font: *-new century schoolbook-bold-i-normal-*-240-*
    Chooser*label.label: XDMCP Host Menu from CLIENTHOST
    Chooser*list.font: -*-*-medium-r-normal-*-*-230-*-*-c-*-iso8859-1
    Chooser*Command.font: *-new century schoolbook-bold-r-normal-*-180-*
    Put this line into /etc/X11/xdm/Xsetup_0
    /usr/X11R6/bin/xsetroot -solid "#000000"
    And this into  /etc/X11/xdm/pixmaps/

  • XFCE4 Window drawing problem

    Greetings again,
    I have this problem with XFCE4, from [extra] (look at the toolbar): http://xs313.xs.to/xs313/07136/toolbar.png
    My xorg.conf is as follows:
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    # SubSection "extmod"
    # Option "omit xfree86-dga" # don't initialise the DGA extension
    # EndSubSection
    # This loads the font modules
    # Load "type1"
    Load "freetype"
    Load "xtt"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    # FontPath "/usr/share/fonts/Type1"
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc104"
    Option "XkbLayout" "gb"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "Auto" # Auto detect
    Option "Device" "/dev/input/mice"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    # Option "Protocol" "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "S700"
    Option "DPMS"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 30-69
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 59-85
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "prosavage"
    Driver "savage"
    BusID "PCI:1:0:0"
    #VideoRam 16384
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "prosavage"
    Monitor "S700"
    DefaultDepth 24
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    # Mode 0666
    # EndSection
    Can anyone help me? Thank you.

    It was with all themes, the problem's fixed now. I had to add this line into my xorg.conf
    load extmod
    Under modules. Thanks though.

  • Problem to install Xfce4-RC3 with the installer...

    Hi,
    I'm using Archlinux and I tried to install Xfce4-RC3 but I get error. The installation wizard stops with this error: 
    Xfce Window Themes
    Running configure... done
    Running make all... done
    Running make install... failed
    And the error log says: 
    >skip<
    /bin/install: writing `/tmp/xfce4-4.2RC3-installer/destdir.23599/usr/local/share/themes/Kde/xf wm4/top-right-inactive.xpm': No space left on device
    make[3]: *** [install-themeDATA] Error 1
    make[3]: Leaving directory `/tmp/xfce4-4.2RC3-installer/xfwm4-themes/themes/kde'
    make[2]: *** [install-am] Error 2
    make[2]: Leaving directory `/tmp/xfce4-4.2RC3-installer/xfwm4-themes/themes/kde'
    make[1]: *** [install-recursive] Error 1
    make[1]: Leaving directory `/tmp/xfce4-4.2RC3-installer/xfwm4-themes/themes'
    make: *** [install-recursive] Error 1
    !! Failed to install xfwm4-themes, see the errors above
    !! for details on the problem.
    What does it mean? I just did a fresh install of Archlinux on my 20G Hdd. So I dont think it's because I dont have space enough!?
    Thanks for your help!

    Hey murpheus, I would suggest using the pkgbuild's neri put together sometime ago in this thread.  I tried the installer for beta 2 a long time ago, but that was just for testing.  Using their installer will only kludge up your system and make things messy when Arch puts out the final 4.2 release.
    I'm running 4.2-rc3 right now.  I used my own pkgbuild's before neri put out his, but check that whole thread (maybe going back to page 1) for instructions on installing his.

  • Xfce4 file associations simple problem

    Can anyone help me with some simple file association problems in xfce4?
    whenever I click a link, it tries to launch the GNOME Web Browser, and I get the following message:
    Could not start GNOME Web Browser
    Startup failed because of the following error:
    Unable to determine the address of the message bus (try 'man dbus-launch' and 'man dbus-daemon' for help)
    I've set the preferred application to Opera in the Settings menu, but no difference.
    Additionally, can anyone point to somewhere explaining how to write custom commands for opening files in thunar. For example, it doesn't recognise .torrent files, and I'd like to launch them in Azureus when I click on them.
    Any help appreciated!

    soylent_green_is_hamster wrote:
    run dbus-launch gnome web browser
    this produces the following error
    Couldn't exec web: No such file or directory
    about the thunar question if u right click a .torrent file and open it with azureus theres a tick which is ticked by default to open these files every time with azureus.
    yeah - but azureus isn't listed as one of the  applications I can pick from. Not sure what to do...
    errm ...
    dbus-launch NAME_OF_BROWSER_EXECUTIVE
    edit: u could always edit the menu or make a custom link adding the command for example dbus-launch FOO instead of just FOO
    about azureus: add it manually using a custom command..

  • [SOLVED]Problems XFCE4: AWM weather notifications, and no logout menu.

    Hi.
    Im having some little problems with xfce, the problems doesn's affect the functionality at all but are starting to be really anoying, since i cannot solve them. Since they are small things, i didn't want to open separate topics for them. If this is bad, please tell me.
    Ok the most anoying problem is that i keep getting a notification  in the desktop saying that my weather plugin cannot find the data. This notification occurs every hour or so. I tended to ignore it, but it keeps appearing.  Im not using the weather app and i have uninstalled completely from my system. Also i have uninstalled and reinstalled both libnotify and xfce4-notifyd. I have cleared the XFCE sessions cache inmy home folder. I have no idea what else to do. Also i have done " pacman -S xfce4 xfce4-goodies" to reinstall the whole desktop just in the hope that the notification will dissapear. I have no idea what file to remove. ¿Can anyone point me in the right direction?
    The second issue comes regarding the xfce options to logout. In the xfce panel there is an option that says logout. This option is supossed to display a menu that gives you options to shutdown, reboot or suspend the computer. I dont get this menu at all, and the logout button just lets me in lxdm sesssion manager. Thus im not able to poweroff the computer directly, and I always use a terminal with the "sudo poweroff" command to poweroff
    However i really want the suspend option from this menu. ¿Am i missing some package ?
    I have Arch linux installed in another computer, an old netbook, also with xfce4 .Iḿ sure that the logout menu appears in this arch installation.
    I just can't think what's wrong. Any help??
    Last edited by hydrosIII (2013-11-29 17:20:47)

    hydrosIII wrote:
    eyemonen: Thank you, in fact when i said logout menu i was refering to the applications menu. Just in the bottom there is a logout entry. this entry normally (i think) displays an action menu when you click on it.
    But i just discovered the plugin that you said and it works fine, to logout and change user, etc.  I will investigate about the applications menu. to see if it works
    Another question, where is the "save session for the future logins" option???
    Ah, I have forgot that there is a log out entry in the application menu since I don't use menu myself. To display the logout dialog command xfce4-session-logout is executed without any options. Check if you the logout dialog is displayed when executing this command in terminal. Then take a look at your xfce4-session-logout.desktop file to see if it contains "Exec=xfce4-session-logout" and not something like "Exec=xfce4-session-logout --logout"? Also make sure that your application menu file refers to that desktop file.
    The logout dialog contains that "save session for future logins" option.

  • Xfce4 - problem with fonts again... (especially k3b)

    hi,
    i did a base install from the arch widget iso 0.6 and used pacman to
    install everything i need. i use xfce4.
    after installing licq i noticed the same font problem writen sevarel times in this forum (big  font with large spaces) but in the options of licq i could change these fonts, now it looks ok.
    later i installed k3b because i was told that k3b is the easiest burner tool linux has to offer.
    again this font problem (2nd time) but this time there was no font option in k3b settings/otion/menu .......
    i read the "crummy fonts in kde" thread and followed all the tips... no results, fonts changed here and there but NOT in k3b!!!
    in another thread in this forum someone postet a screenshot of his k3b...
    my k3b looks 100% the same :-/
    but as i can remember the problem was not solved.
    what i want is to change this font or another good and easy burning tool :-)
    thanks for every help!
    greeting matto

    matto wrote:...i noticed the same font problem writen sevarel times in this forum (big  font with large spaces) but in the options of licq i could change these fonts, now it looks ok.
    later i installed k3b because i was told that k3b is the easiest burner tool linux has to offer.
    again this font problem (2nd time)...
    Check out this thread for help with XFCE4 fonts:
    http://bbs.archlinux.org/viewtopic.php?t=5021
    just read past the beer talk toward the bottom.
    In my experience, large fonts have to do with improper DPI settings.  The best match is to find out what your resolution is, and then set your DPI to the horizontal DPI setting, as shown below (for mine):
    xdpyinfo | grep resolution
    resolution: 87x90 dots per inch
    I set my DPI to 87 (the horizontal) and all is proportional.  You can also adjust the DPI settings to make the screen to the proper 4:3 aspect ratio.  For some reason, the NVIDIA driver kinda fubars it a bit, and I have to manually adjust it with certain resolutions.  I discuss how to compute those numbers in that thread as well.

Maybe you are looking for

  • Delay in real instruments.

    When I try to play my guitar (through a Stealth USB cable) into my songs there is usually about a 1/4 to 1/2 second delay between when I hit a note and when I hear it play back through the monitor. I'm running an iMac 3.06 intel core 2 processor with

  • Adding a Second router to my LAN

    I have 4 devices in my network -  1. Cable surfboard modem 2. WRT160N Wireless Router - 192.168.1.1 3. Linksys 10/100 5-port wired switch 4. WRT160Nv3 - 192.168.1.2 My current setup is - 1. Modem to first router. (WAN PORT) 2. LAN Port from router to

  • JS error using JQuery Columnizer Plugin

    I'm not sure how many of you are familiar with this plugin for JQuery, but Columnizer (http://welcome.totheinter.net/columnizer-jquery-plugin/) is a plugin that allows you to create multi column text from one div. I know that can now be done CSS3, bu

  • Safari being REALLY slow or sometimes "Cannot find server"! HELP!

    Right, i have the new 'Safari 4' but its being really slow. When trying to load up webpages, it sometimes takes AGES to load a page, or sometimes it even comes up with the message 'Safari cannot find the server'. I have 'LittleSnitch' installed so I

  • How does chat applet works?

    how does chat applet works? What specific technologies should i learn to make a chat messaging work? thanks in advance for ur help...