XI 3.1 WebI client Java and Plug ins

Hello All,
Can anyone confirm which version of Java, or any other plug-ins or downloads, will need to be installed on a Webi Client (running on Windows 2000 and XP).
Please reply asap.
Regards,
Krishna

Hello,
XI 3.1 WebI client (applet & Rich client) runs with JRE 1.6. No other plug-in or download is required (besides, anything necessary to run the client is installed with the BOE client install, incl. required JRE).
Hope that helps,
David.

Similar Messages

Web as Java and Third Party

Hi experts,
I need a clarification about Web As Java and Third Party. I have done a lot research at the google and sdn but i am still not clear.
File -> PI -> third party
This third part is installed at other server( not in PI server ) and it is running on j2ee application. During creation of Technical System and Bussines System should i use Web As JAVA or third party?
Please guide me experts and i will give you back the good *oints.
Thank you experts,
S.Saravannan

The JAVA based system should be available withing client network, in this case we create system as Web As JAVA.
you can get more info on below link]
http://help.sap.com/saphelp_nwpi71/helpdata/EN/24/8fa93e08503614e10000000a114084/content.htm
Regards,
Raj

Web as java and abap

How can we create technical systems for WEB as JAVA and ABAP

Hi,
Working with System Landscape Directory (SLD)
System Landscape Directory is the place where you define the clients landscape information (Technical System and Business System) and also describe the Products and Software Components that is been installed on these systems. Apart from just defining these information we can also facilitate installations, upgrades and transports using SLD. I like to always spell it as "Information Provider for XI".
Lets go some more deeper into the subject and elaborate each of the topic, as I said SLD targets on information like Landscape Information (DEV, QA and PROD) and softwares installed (ECC, CRM, APO) apart from these we can do some of administration parts like locking, transports of packages.
Landscape Information: It is also called as "Systems Catalog". This basically describes the systems in two views Technical system (Physically) and Business System (Logically). Hey One question how you refer to you PC in office. Do you refer it with IP address or with some desk number (XYZ.01.45). Well if you refer with IP then you may have a host name attached to it (Type "hostname" command in the Command Prompt to check the Host name of your system) then it is called as Technical system and if you give any logical name to it say desk number then it is called as Business System. Simple!
So, logically I can say that a One Technical System can be reffered with multiple Business system names. Okay, let me also put in this way for SAP guys. If R/3 is installed on one machine and this R/3 has multiple clients on the same system. Then the system is called as Technical system and multiple Clients are called as Business Systems.
Example: When we define the 3rd Party system we assign HostName to Technical system and some Logical Name (LEG001) to the Business System. If we are creating SAP system then the HostName is Technical System and Clients are addressed as Business systems.
Step by Step process :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/workingwithSystemLandscapeDirectory+%28SLD%29&
Reward points if this helps
Regards
Vani.

Difference between web dynpro java and web dynpro abap

Hi this is watson maureen,
I wnat to know what is the difference between web dynpro java and web dynpro abap?
thank
maureen

Hi watson,
Go through these links, you will get the difference between web dynpro java and web dynpro abap
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0e4940c-035c-2b10-0b9d-eb8f99674f4e
Web Dynpro: ABAP or Java?
Regards
Sreedhar.

Problem in completing the TASK when using Web Dynpro Java and BPM

Hi,
I am using Web Dynpro Java and BPM.
i see my Web Dynpro View when i run the process.
Just that the task is not completing.
when i click on the Web Dynpro button to signal the completion of the event, nothing happens.
i have appropriately created events in both Component controller and Interface Controller and used the same in creating the Task.
a method in Component controller fires the event and a button click in the view calls this method.
i have successfully completed Donka Dimitrova's "SAP Netweaver Business Process Management-End-to-End Process Implementation Sample " but when i tried my own with slight modifications, it is not working !!!
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d07f3e88-554f-2b10-3cbf-ab8afea51b9f
regards,
-Amol Gupta

Hi Amol,
The way you described the things, I dont see any problems. Just to make sure that you are triggering the right event that you mapped as completion event for the task, try to cross check once again and see if the correct event is getting triggered. Also try to put some messages for debugging to see till where the control goes.
Regards,
Arafat

Videos will no longer play and add-ons and plug-ins say up to date?

My computer no longer plays videos-- whether on facebook or youtube... facebook videos get a tiny square but never open to play-- youtube screen where video should be is blank... all add-ons and plug-ins say up to date. I have comcast internet. Thank you

Please try two things, please clear the storage for the flash plug in by right clicking where the video should be and clicking "Global settings" and navigate to storage. Clear the stored data and restart Firefox.
Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
To disable hardware acceleration in Flash Player:
#Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
#Right-click on the Flash Player logo on that page.
#Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
# Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
# Remove the check mark from '''Enable hardware acceleration'''.
# Click '''Close''' to close the Adobe Flash Player Settings Window.
# Restart Firefox.
This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
Does this solve the problem? Let us know.

I have been taken over by a local network that has disabled my systems profiler and plug-ins. how do I break free?

I have been taken over by a local Network that has disabled my systems profiler and plug-ins. How do I break free?

If you are absolutely sure that this is the problem then you should turn the airport off.

HELP! Where should I put my codecs and plug-ins!?

I do a bit of amateur editing, and I have a bunch of codecs and plug-ins. And a few months ago, I realized I MIGHT have been putting them in the wrong folder!
Macintosh HD / Library / Quicktime
So... I "copied all" and I pasted into the OTHER folder that seemed to have some codecs and plug-ins:
Macintosh HD / System / Library / Quicktime
Then, I "copied all" from THAT folder into the other folder, not overwriting duplicates.
I DO remember that there were some in BOTH folders before I started adding...
HELP! Where should they all go?
tia,
e

Um, mpeg2, Divx, etc... flip and perian are fine, but don't come anywhere NEAR allowing you to play the totality of formats out there.
However, I guess my question should have been, which ones are "Apples" and which ones aren't... I'd love to NOT have duplicates in both folders.
Is there anywhere that lists the "default" Apple Quicktime Pro codecs and plug-ins that should be in that "apple only" folder?
e

Sample and Plug Ins, and Knobs oh my!

So I am still a total noob to this. I have used workstations and synths for the majority of my career but with space and weight being an issue, I am looking to use my midi more and more for live gigs. I have a couple of questions.
1) In MainStage, how can I assign a recording I did in logic(sample) to one of my drum pads on my midi controller? Could I made the pad a different note like a c#0 and have the sample trigger when i hit that c#0 pad, while my key is setup c1-whatever.
2) I downloaded studio 2 from Presonus and there's some sounds I like in there. How do I load them into MainStage?
3) Finally I have my setlist all setup. Is there a way to instead of manually clicking on my laptop to switch between different parts of the song I have setup, to just use a knob on my midi device?
Btw I have MainStage 3, M audio Axiom 61 Pro.
Thanks so much to anyone that replies, it is much appreciated!
-Drew

Um, mpeg2, Divx, etc... flip and perian are fine, but don't come anywhere NEAR allowing you to play the totality of formats out there.
However, I guess my question should have been, which ones are "Apples" and which ones aren't... I'd love to NOT have duplicates in both folders.
Is there anywhere that lists the "default" Apple Quicktime Pro codecs and plug-ins that should be in that "apple only" folder?
e

How do I fully uninstall java and plug-in?

Both Firefox 1.0.6 and IE6 hang when the plug-in is loaded, so I want to get rid of all java installations and plug-in remnants and start over fresh.
When I uninstall using "Add/Remove Programs" everything appears installed. Yet when I download a fresh JavaSDK install (1.4.2_08) and intall it, the old settings (remote debugging settings, console show/not show) are as they were. How do I get rid of all the settings?
Some things are apparently not getting uninstalled--what are they, where are they, and how do I remove them?
Thanks for any help.
Todd.

Look for a file named "deployment.properties" on your hard drive(s): this is where the Java Plug-in stores its properties.
Regards,
Marco.

Web Dynpro Java and Adobe Interactive forms Which Tool Should I Use?

Hello Experts,
Can anyone help me with deciding the right technology to use among WDJ and Interactive form by adobe. I want to prepare a presentation to showcase the strong and weak points in order to decide the final technology.
Thanks in advance for the help.

I personally prefer Web Dynpro Java without Interactive forms in most cases.
    Interactive forms are developed on top of Web Dynpro, so you are including an extra tier with the complexity it adds.
    PDF files tend to go big and performance tends to go down. In average, my forms weight between 1 - 5 Mb so network traffic is a bottleneck.
    The scripting environment is very poor.
    On the other hand PDFs interfaces are nicer than WDJ, but I think navigation is worst in part because of the performance issues. Considering this, reporting could be a good use of Interactive Forms.
    The best scenario for using Interactive Forms is for off-line applications, which can't be done with WDJ. For example, if you want your customer to fill an order list, you can send automatically an offline pdf file wich he can fill and submit to your company, initiating a bpm.
Best regards, Aldo.

Scoll Lagging FF7.0.1: fine in safe mode, continues to lag when not even when extensions and plug-ins are disabled (reinstalled, problem continues)

a few days ago, all web pages started to lag when scrolling. Tried safe mode and speed was restored. returned to normal mode and disabled all plug-ins and extension, however, there was no effect upon the scroll lagging. performed a complete Kaspersky virus check with no issues. Other programs on desktop (ex: outlook) are running concurrently at speed without issue. IE is not running with scroll lag.
Oh, BTW, I don't know if it is related, but I was in China last week. and Only noticed this scroll lagging here in the US when I opened it this morning ... so, perhaps there is a site preference issue?

If it boots OK in Safe Mode, the you want to check those possible causes outlined in this article.

Mac OS 10.6.8 Parental Controls interfere with Firefox by preventing access to websites and plug ins

Mac OS 10.6.8 iMac, running FireFox 15 in grade school computer lab. When Parental controls are enabled in system preferences Firefox does not work properly. Can't use Google to search from the search bar at the top, can't access plug ins, there are even a few websites that can't be used. An example is digitalpassport.org from Common Sense media. Students can't access to log into their accounts. Parental Controls have been running on these macs for over a year with no issues. I thought it was the latest Firefox version giving us a problem but I updated to Firefox 16 today and the problem persists. If I turn off parental controls, Firefox works perfectly. I was not previously limiting applications, just blocking youtube and facebook. I tried limiting applications and then allowing all of them but that didn't help. What am I missing? Also, I can't access Mozilla support pages either when Parental Controls are enabled.

Check the PLUGIN UPDATES! Shockwave and Java were outdated and needed re-installation on mine! Took a couple of efforts with restarts but it is obvious that it solved my problems! Firefox Mozilla Toolbar 'Help' > 'Firefox Help' > lower right side of page displays link to Plugin Update review....

Upgrade and plug ins migration ? speed changes and transitions to motion 3

I have the FCS2 upgrade on its way soon i hope..
will my natress plug ins and others migrate when i go from FCS1 to 2?
I am mid project - have done all my captures but havent got into the nitty gritty of the edit yet - you reckon its a bit risky to upgrade?
I am super keen to get the ability to easily do ramps (in Motion 3 or in FC 6) and 3d logo fly arounds. Looking fwd to being able to throw transitions and speed changes into Motion 3 - i hear that it can deal with that now - is this true?

Thanks - thats all good

Acrobat 10 and plug-ins for Acrobat 9 incompatibility?

Hi,
Today I've installed trial version of Acrobat 10 to check if my plug-in for Acrobat 9 could run for it as well. But after Acrobat 10 launch I've got a window:
Acrobat.exe - Unable to Locate Component
This application has failed to start because MSVCP80.dll was not found.
Quick check over plug-ins shipped now inside Acrobat 10 showed me that they are using now MSVCP90.DLLL library instread of MSVCP80.dll used for Acrobat 9.
Does it mean that we need to recompile our source code with higher version of MS Visual Studio? If so - what version should we use?
Does it also mean that our plug-ins prepared for Acrobat 9 are incompatible with Acrobat 10 or there is some way they could still run without recompilation?
Any comments on this would be highly appreciated.

I always prefer to use shared libraries, i.e. DLLs, in their supposed shared way and not statically embedded into my executable if I know that some environment is pretty stable and customer is aware of various possible DLLs dependencies. If Acrobat could do some job for me - then I'm happy with that without allocation of additional memory/resources needed in case of static linking.
So, you don't answer my question. What C++ compiler's version should be used to put MSVCP90.DLL reference now instead of previously used MSVCP80.DLL?

XI 3.1 WebI client Java and Plug ins

Similar Messages

Maybe you are looking for