XIAdapterFramework Error Routing

Hi All,
I am getting following error in RFC->XI->JDBC(stored proc) sync scenario.Any way to capture this messaage & pass it back to RFC or write this message into file ?
Thanks,
Tuhin
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'insert_VendGenral': java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Violation of PRIMARY KEY constraint 'PK_VendGenral'. Cannot insert duplicate key in object 'VendGenral'.</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi
Check this links, same discussions here
com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol ha
ERROR: "com.sap.aii.af.ra.ms.api.ConfigException:"
/thread/1276256 [original link is broken]
Regards
Ramesh

Similar Messages

How to resolve - LIBTUX_CAT:4053: ERROR: Routing function failed - error ?

Hi,
We are using TUX 8.1 and i am getting the error :
LIBTUX_CAT:4053: ERROR: Routing function failed
while invoking a tpforward call.
My ubb file for the new service is below.
"NewXXInqu"
LOAD=50 PRIO=50
BUFTYPE="ALL"
ROUTING="PARTITION"
TRANTIME=90
AUTOTRAN=N
DEFAULT: LOAD=50 PRIO=50 BUFTYPE="ALL" AUTOTRAN=N
*ROUTING
"PARTITION"
FIELD="PARTITION_ID"
BUFTYPE="FML32"
RANGES="1:P1,2:P2"
Its also giving the error : GP_CAT:1064: ERROR: Routing field for 'NewXXInqu' null.
LIBTUX_CAT:1401: WARN: tpforward tpacall failure TPESYSTEM - internal system error
I have the NewXXInqu object file created,which is linked to NewXXSvr. This server NewXXSvr is up and running, and i can see that using ps -ef.
can any one please tell me what is that im missing here. What does routing field 'xx' null mean ?
Even if i invoke my new service directly, it is giving the same error :GP_CAT:1064: ERROR: Routing field for'xxx' null,
LIBTUX_CAT:4053: ERROR: Routing function failed.
Appreciate your reply,
thanks,
gopi.

Hi,
i am using tuxedo 9.1 and i am getting the same error:
tpacall("PP_GA_RECARGA3", 0x0x8088140, 140, 0x0)
GP_CAT:1064: ERROR: Routing field for 'PP_GA_RECARGA3' null
LIBTUX_CAT:4053: ERROR: Routing function failed
tpacall = -1 [tperrno TPESYSTEM]
tpabort(0x0)
My ubb file for the service is belong:
*SERVICES
PP_GA_RECARGA3
LOAD=50 PRIO=50
BUFTYPE="ALL"
TRANTIME=30
AUTOTRAN=Y
SVCTIMEOUT=60
ROUTING=snum_telefono
*ROUTING
snum_telefono
FIELD=__routing__
RANGES="0:GRP_PPGA_00,1:GRP_PPGA_01"
BUFTYPE="FML32"
The service define is:
PP_GA_RECARGA3_snum_telefono 443 string - -
PP_GA_RECARGA3_stipo_recarga 444 string - -
PP_GA_RECARGA3_fimp_recarga 445 double - -
PP_GA_RECARGA3_scod_moneda 446 string - -
PP_GA_RECARGA3_scod_promocion 447 string - -
PP_GA_RECARGA3_scod_usuario 448 string - -
PP_GA_RECARGA3_lper_validez 449 long - -
PP_GA_RECARGA3_ssec_actuacion 450 string - -
PP_GA_RECARGA3__rpr_ret 451 long - -
If i invoke the service in other environment with similar configuration, the ulog show this:
tpacall("PP_GA_RECARGA3", 0x0x80882d8, 140, 0x0)
tpacall = 64 [CLIENTID {1280130829, 0, 430}]
tpservice({"PP_GA_RECARGA3", 0x10, 0x0x814a4f0, 1164, 0, 0, {1280130829, 0, 430}})
tpalloc("FML32", "", 1024)
All it's right
The difference is that one it's over vmware.
Does anyone know if this can influence in the routing?
Thanks,
Paula.

Error Routing protocol - EIGRP between Cisco ASA with Switch 4506

Dear Cisco Team,
I have problem when I configed EIGRP between cisco ASA 5510 with core switch 4506. This is below error
*Nov 4 05:08:09.898: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is up: new adjacency
*Nov 4 05:09:29.409: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is down: retry limit exceeded
*Nov 4 05:09:29.499: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is up: new adjacency
*Nov 4 05:10:35.609: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.18 (GigabitEthernet2/42) is down: holding time expired
*Nov 4 05:10:49.009: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is down: retry limit exceeded
*Nov 4 05:10:53.230: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is up: new adjacency
quang huy2004: *Nov 4 05:08:09.898: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is up: new adjacency
*Nov 4 05:09:29.409: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is down: retry limit exceeded
*Nov 4 05:09:29.499: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is up: new adjacency
*Nov 4 05:10:35.609: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.18 (GigabitEthernet2/42) is down: holding time expired
*Nov 4 05:10:49.009: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is down: retry limit exceeded
*Nov 4 05:10:53.230: %DUAL-5-NBRCHANGE: EIGRP-IPv4 100: Neighbor 172.16.10.20 (GigabitEthernet2/42) is up: new adjacency
the tech Spec
ASA, IOS : 8.0.2
4506, License IP Base; OS: Unisal 15 M.2
I checked between ASA with Router ok; but between ASA with 4506 error
Can you help me ?

Hello,
This logs means that the hold time expired so the hello packets are not being received, usually means multicast packets are missed-224.0.0.10)
I would recommend you to try another cable because this ussualy is a phisical or congestion issue.
Can you try that and let us know the result, also if that does not help can you send us the following outputs:
-Show ip EIGPR neighbors
-Debug EIGRP packet hello
Regards,
Julio

Permission denied in sap router

Hello everybody,
I have installed the SAPROUTER.
when our remote user login by SAPSTRING 114.240.174.28 then user can login without any problem
but when the user used the /H/114.240.174.28/H/192.168.0.170/S/3299/H/
then they can not able to login, get error
router permission denied 115.240.50.30 to 192.168.0.170, 3299
I have check the saposs RFC from sap its work fine.
In my SAP routtab file I maintain the entries as follows
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.180 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.185 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.186 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.180 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.185 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.0.186 *
P * 194.39.131.34 3299
P * * *
Please suggest where is wrong.
Thanks
Ganesh

HI,
Our remote user can access with the /H/external_IP_of_saprouter/H/internal_IP_of_saprouter/H/ this string
but now they are not able to access by using above said string , when they tired to access they got message
like
router permission denied 115.240.50.30 to 192.168.0.170, 3299
actually, in saprouttab I mention P * * * .
Thanks
Ganesh

SAP ROUTE PERMISSION DENIED

Hi Experts,
When i try to logon SAPNET from T/Code OSS1 its througing error as
"sapsrv2a: route permission denied(12.34.23.5 to oss1 sapdp01)
Location SAPoruter 37.15 on sapserv2a
Component NI
Release 640
Version 37
Return Code -93
Counter 5
Kindly suggest any solution for this problem
Thanks in Advance,
Ramamurthy

HI
I have this error too if I try to logon to sapnet with OSS1 transaction.
you must logon to sapnet trought internet explorer http://service.sap.com
Note 33135 - Guidelines for OSS1
Note Language:      Version: 15     Validity: valid since 30.06.2006
PDF     Download Corrections     Compare Versions     SSCR
     Go to SAP Note: Display
Content: Summary | Header Data | Releases | Related Notes
Summary
Symptom
You are using transaction OSS1 to establish a remote connection.
Other terms
OSS1, RFC connections to SAPNet - R/3 Frontend, SAPOSS, OSS_RFC, SAProuter
Reason and Prerequisites
Remote connection to SAP, R/3 system
Solution
On April 03, 2006, SAPNet - R/3 Frontend was deactivated as a user interface. SAPNet - R/3 Frontend, which was introduced in 1995 as SAP's Online Service System (OSS), was SAP's first and, for a long time, its only support system, which customers worldwide accessed using transaction OSS1.
Today, the SAProuter connection via transaction OSS1 continues to be used for the following RFC connections:
- Transfer of EarlyWatch Alert data
- Exchange of data using the SAP Notes Assistant
To install and configure this transaction, proceed exactly as follows:
1. Making the technical settings for OSS1
You must configure transaction OSS1 before you can use it. Choose "Parameter" from the menu bar (-> Techn. Settings) and choose "Change".
The technical settings for transaction OSS1 are set by default to Walldorf (sapserv3) with the IP address 147.204.2.5. If this address does not correspond with the entry in your host file, choose the sapserv3 IP address that is valid for you by choosing the menu option "SAPRouter at SAP -> Walldorf".
Furthermore, enter your local SAPRouter information in the "SAPRouter 1" fields. Now save the settings.
After making these changes, the screen for the technical settings should be as follows:
Router data for the logon to SAPNet - R/3 Frontend
-Customer SAPRouters----
-SAPRouter 1----    -SAPRouter 2----
Name         my_saprouter
Name
IP Address   x.x.x.x
IP Address
Instanc No. 99
Instance No.
-SAPRouter and OSS Message Server at SAP----
-SAPRouter at SAP----    -OSS Message Server----
Name          sapservX
Name          oss001
IP Address    x.x.x.x
DB Name       O01
Instance No. 99
Instance No. 01
NOTE:
Replace sapservX with the following values:
sapserv1 (194.117.106.129) connection via Internet VPN
sapserv2 (194.39.131.34) connection via Internet SNC
sapserv3 (147.204.2.5)    for customers with connection to Germany
sapserv4 (204.79.199.2)    for customers in America
sapserv5 (194.39.138.2)    for customers with connection to Japan
sapserv6 (194.39.139.16) for customers in Australia and New Zealand
sapserv7 (194.39.134.35)   for customers in Asia
Choose "Start Logon to SAPNet - R/3 Frontend". If the system issues message S1 452, there are errors in the operating system configuration. In this case, see appendix A.
When you install an access authorization file "saprouttab", you should ensure that all of your front ends and R/3 servers can establish a connection to sapserv3, service sapdp99. Appendix E contains examples of saprouttabs. For more information on the SAPRouter, refer to the SAPRouter documentation (Note 30289).
Try it again until the dialog box "Please select a group" appears. If the dialog box "Please select a group" is displayed, the configuration for transaction OSS1 is correct. You can then proceed with the next section.
NOTE:
When you try to log on to SAPNet - R/3 Frontend, the system issues an error message indicating that you are no longer allowed to log on to SAPNet - R/3 Frontend.
2. Further questions?
As soon as you have carried out the steps described above, transaction OSS1 should connect you to the most efficient SAPNet - R/3 Frontend application server.
If you have further questions or problems, the file entitled "OSS1. TroubleShooting" contains additional information. If you have a problem that you cannot solve, contact our hotline: 0180/5 34 34 3-3.
Appendix A
If message S1 452 appears when you try to log on to SAPNet - R/3
Frontend with transaction OSS1, there is an incorrect setting somewhere (either in the technical settings for OSS1 or at operating system level).
To find out why the connection to the message server was unsuccessful, choose Tools (Case, Test ( Developer trace (transaction ST11). The trace contains an entry for dev_lg. This file contains the error log. The LOCATION line, if available, contains the host on which the error occurred. The problem description is found in the ERROR line. If you cannot find the entry dev_lg, check whether the program "lgtst" exists (see appendix B).
Examples of the contents of dev_lg:
ERROR       partner not reached (host abc.def.gh.i, service sapdp99)
TIME        Thu Aug 10 09:17:57 1995
RELEASE    21J
COMPONENT   NI (network interface)
VERSION    15
RC          -10
MODULE      niuxi.c
LINE        773
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO      239
ERRNO TEXT Connection refused
COUNTER    1
Here, the system could not reach the SAPRouter. For example, no SAProuter could be found under service 99 (port 3299) on the host with the IP address abc.def.gh.i. The SAPRouter process does not work or the IP address was not configured correctly in OSS1.
ERROR      service 'sapdp99' unknown
TIME        Thu Aug 10 09:22:00 1995
RELEASE    30A
COMPONENT   NI (network interface)
VERSION    17
RC          -3
MODULE      niuxi.c
LINE        404
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER    1
This message indicates that the service sapdp99 was not entered in /etc/services. Add the entry in /etc/services. This must be available on all R/3 servers and front ends.
LOCATION    SapRouter on abc.def.gh.i
ERROR      route permission denied (XXXXXXXX to sapservX, sapdp99)
TIME        Thu Aug 10 09:37:44 1995
RELEASE    30A
COMPONENT   NI (network interface)
VERSION    17
RC          -94
MODULE      nixxrout.c
LINE        1426
COUNTER    1
The file saprouttab, which contains the valid connections, is not correct. The SAPRouter on the host abc.def.gh.i does not set up the connection to sapservX. Check the SAPRouter file saprouttab. This should contain every R/3 server and frontend (see also appendix E).
LOCATION    SapRouter on abc.def.gh.i
ERROR      internal error
TIME        Thu Aug 10 10:50:18 1995
RELEASE    21J
COMPONENT   NI (network interface)
VERSION    15
RC          -93
MODULE      niuxi.c
LINE        773
DETAIL      NiPConnect
SYSTEM CALL connect
ERRNO      242
ERRNO TEXT No route to host
COUNTER    1
This error message indicates that the host abc.def.gh.i cannot process the IP address of the next host configured in OSS1. If the SAPRouter error message appears and the next host is sapservX, check the address for sapservX. OSS1 is delivered with the default settings sapserv3 and IP address 147.204.2.5. Customers in the U.S.A. are normally connected to sapserv4, IP address 204.79.199.2. If required, change the technical settings of OSS1 accordingly.
ERROR      internal error
TIME        Thu Nov 23 00:11:20 1995
RELEASE    21J
COMPONENT   NI (network interface)
VERSION    15
RC          -1
COUNTER    1
This message shows that the instance number entered does not agree with at least one of the technical settings for the SAPRouter defined in OSS1. The default for the instance number of the SAPRouter is 99. Under no circumstances should you enter the instance number of your R/3 system for the SAPRouter. You need to specify instance number 99 for sapservX. Otherwise, it is not possible to log on to SAPNet - R/3 Frontend.
LOCATION    SapRouter on sapservX
ERROR       route permission denied (XXXXXX to oss002, sapmsO01)
TIME        Mon Nov 27 19:25:54 1995
RELEASE    30A
COMPONENT   NI (network interface)
VERSION    15
RC          -94
MODULE      nixxrout.c
LINE        1390
COUNTER    1
An incorrect server was entered as message server 001, in this example, the server oss002. The message server for O01 is oss001. Change the technical settings for transaction OSS1 accordingly.
Appendix B (for Windows NT only)
Change to the directory "\usr\sap\<SID>\SYS\exe\run" and search for the program "lgtst.exe". If you cannot find it, or if the length of this file is not exactly 640216 bytes, import the program "lgtst.exe" from sapservX via ftp:
> ftp sapservX
Connected to sapservX.
220 sapservX FTP server (Version 1.7.194.2 Wed Sep 8 17:23:04 GMT 1993) ready.
Name: ftp
331 Guest login ok, send ident as password.
Password: <Your_customer_number>
ftp> cd dist/permanent/OSS1/lgtst.exe
250 CWD command successful.
ftp> binary
200 Type set to I.
ftp> get lgtst.exe
150 Opening BINARY mode data connection for lgtst.exe (640216 bytes).
226 Transfer complete.
640216 bytes received.
ftp> bye
Copy this file into the aforementioned directory.
Appendix C
The messages from transaction OSS1 (error messages and information) are given in the following list. Each message is described briefly.
|No.| Message Text
|450| Maintain technical settings first.
|452| Unable to connect to SAPNet - R/3 Frontend message server.
|454| E: Unable to start SAPGUI.
|455| SAPGUI was started.
|456| Specify a server name.
|457| Specify an IP address.
|458| Specify an instance number.
|459| Specify a database name.
|460| No authorization to log on to SAPNet - R/3 Frontend.
|461| No authorization to maintain technical settings.
|462| E: RFC destination could not be generated
Number 450: Maintain technical settings first
You can only log on to SAPNet - R/3 Frontend if the technical settings
are maintained. The technical settings determine the network path from the customer R/3 system to the online service system.
Number 452: Unable to connect to SAPNet - R/3 Frontend message server.
This message appears if the connection to the SAPNet - R/3 Frontend message server was not possible (system name O01, server oss001). There can be different reasons for this (see appendix A).
Number 454: E: Unable to start SAPGUI.
Transaction OSS1 could start the SAPGUI (not SAPTEMU), either because the program does not exist in the path given, or because the execute permission is not set correctly. Check whether the SAPGUI exists; SAPTEMU alone is not sufficient.
Number 455: SAPGUI was started.
This is not an error message. It merely informs you that an additional SAPGUI was started to establish a connection to SAPNet - R/3 Frontend.
Number 456: Specify a server name.
The server name was omitted from the technical settings.
Number 457: Specify an IP address.
The IP address was omitted from the technical settings.
Number 458: Specify an instance number.
The instance number was omitted from the technical settings.
Number 459: Specify a database name.
The database name for the Online Service System (001) was omitted from the technical settings.
Number 460: No authorization to log on to Online Service System
You do not have authorization to call transaction OSS1. Up to Release 2.2F: The authorization S_TSKH_ADM is checked for value 1. After Release 2.2F: For transaction OSS1, there are two special authorization profiles (see appendix D).
Number 461: No authorization to maintain technical settings.
You do not have the authorization to maintain the technical settings (see appendix D).
Number 462: E: RFC destination could not be generated.
In Releases 2.2, you can ignore this message. When saving the technical settings, an attempt is made to generate the RFC destination SAPOSS. The length of an RFC destination is limited in 2.2, and the maximum length was exceeded by the parameters of the technical settings.
Appendix D
As of Release 2.2F, there are two different authorization profiles for transaction OSS1: S_OSS1_START and S_OSS1_ADMIN.
S_OSS1_START authorizes you to call transaction OSS1 and to log on to the Online Service System. In addition, S_OSS1_ADMIN contains the
authorization to maintain the technical settings for the transaction.
The technical settings of OSS1 must be made at least once. Therefore, add S_OSS1_ADMIN to your user profile, log off, and then log on again afterwards.
Appendix E
Prerequisites:
(A TCP/IP connection can be established between the SAProuter on
the customer system and the SAProuter on sapserv3 in Walldorf.
(The SAProuter process must be started on the server that is registered
with SAP:
saprouter -r -R saprouttab &
Example of the "saprouttab" file with minimum configuration:
saprouttab - Example
Allows connections from the entire customer network to sapservX
and therefore to the Online Service System via SAProuter port 3299.
P      *      sapservX    sapdp99         *
Allows connections from sapserv3 to the entire customer network,
for example for EarlyWatch or First Level Support.
P   sapservX      *          *            *
Header Data
Release Status:     Released for Customer
Released on:     30.06.2006 09:13:57
Priority:     Correction with high priority
Category:     Consulting
Primary Component:     XX-SER-NET Network connection
Antonio.
Edited by: Antonio Voce on May 22, 2008 5:07 PM

Error Disabling the Clock Rate on Interface

When i try to disable the clock rate on a Serial interface of a 3640 Router the router returns the following error:
Router(Config-if)#no clock rate 56000
FECPM PM doesn't support clock rate 0
HOw can i disable the clock rate

Hi
I even kept the interface in admin shut mode but it refuses to accept the command no clock rate
After using show controller interfaces serial 0/1
it gives o/p as serail not connected
Kindly see how to remove the command
regards
Sohail JKB

Saprouttab, route permission denied

hi,
I have to open one ITS (internet transaction server) link to SAP thru saprouttab. I have done the entry in saprouttab. But when SAP is trying to connect, he is getting error "SAP WEB PROXY: destination server not reachable"
detail error : route permission denied.
I have a ITS link <hostname.mycompany.com> and the port is 80. In saprouttab table, permission is given and entry is
P 204.79.199.2 <hostname.mycompany.com> 80
P 147.204.2.5 <<hostname.mycompany.com> 5631
My Question:
What is the correct port for ITS link ? Since my ITS link is having default port 80, I have given 80 in saprouttab. But still it is giving error route permission denied. SAP has send me the error screen snapshot and in that destination port it is showing 3299.
Can any one help me what should be the correct entry in saprouttab and the correct port number ?? Is there any way I can check the permission before asking SAP to check ?
Thanks
Regards,
Basis

hi basis ck,
3299, is the SAP Gateway Service port. So check whether this service is mentioned in "service" file or not. If not then make an entry there.
Normally, if u have a SAPGUI installed in ur machine, then the entry will be automatic.
I think then connection should be ok or else then try with 3299 in place of 80 in ur saprouttab entry.
with regards,
Samarpan

Route permission denied

Hello everbody;
When I want to entry to the server sap, I have this error route permission denied (181.66.156.130 to n4sexternal,sapdp01)
Someone can help me please

Hi, Robert!
You'll have to config your SapRouter appropriately. It's usually done by Basis team.

Service Module is trying to recover from error - Please help

HI Guys
I am currently installing a NM-AIR -WLC 6 wireless module in a 2811 and its giving me the follwing errors below and status
I have checked the troubleshooting pdf and says might be possible hardware error ,but before i go down that road would like to know if any of the engineers have solved this problem
Info about router and module is as follows
Router#service-module wlan-controller 1/0 status
Service Module is Cisco wlan-controller1/0
Service Module supports session via TTY line 66
Service Module is trying to recover from error
Service Module status is not available
Router#
Trying to reset Service Module wlan-controller1/0
*Mar 28 21:49:06.379: %LINEPROTO-5-UPDOWN: Line protocol on Interface wlan-controller1/0, changed state to down
*Mar 28 21:49:26.379: %LINEPROTO-5-UPDOWN: Line protocol on Interface wlan-controller1/0, changed state to up
Router#
Router#service-module wlan-controller 1/0 status
Service Module is Cisco wlan-controller1/0
Service Module supports session via TTY line 66
Service Module is trying to recover from reset/shutdown
Service Module status is not available
sh version
Router#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4(15)T17, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 24-Jan-12 07:41 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
Router uptime is 28 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-advipservicesk9-mz.124-15.T17.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
Processor board ID FCZ0932701R
2 FastEthernet interfaces
1 Serial(sync/async) interface
1 terminal line
1 Virtual Private Network (VPN) Module
1 cisco Wireless LAN Controller(s)
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
Router#

HI Guys
And it gets worse I am now getting the following error
Router#service-module wlan-controller 1/0 status
Service Module is Cisco wlan-controller1/0
Service Module supports session via TTY line 66
Service Module is failed
Service Module status is not available
regards Thags Govender

Two error

I found two kind of errors in our ULOG file.
these errors often occur.can you tell me why so?
1)
ERROR: Service XXXX not available in group GROUP_YYYY
GWTDOMAIN.294184.1.0: LIBTUX_CAT:741: ERROR: Routing function failed
2)
WSH.40820.1.0: WSNAT_CAT:1042: ERROR: tpcall() call failed, tperrno = 6(or 12)
Thanks

Thank you.
But our configuration is right, It is confirmed by BEA Support Engineer.
I Only wonder why and what exception will lead to these strange situation?
Scott Orshan <[email protected]> wrote:
It depends on your ROUTING section, and how your RANGES specification
chooses a group based on the data content.
zhangjr wrote:
I wonder why sometimes it is routed to a group that does offer theservice?
we don't modify config.
or what exception will lead to these situation?
Scott Orshan <[email protected]> wrote:
Perhaps sometimes it is routed to a group that does offer the service.
zhangjr wrote:
But it happen sometimes, not always?
Scott Orshan <[email protected]> wrote:
1) If you use a Routing function, every group to which you might
route
a
message must offer the service. Your routing function chose GROUP_YYYY,
but you are not running a server there that is offering XXXX.
2) tperrno 6 is TPENOENT - the service does not exist. Check tmadmin/psc
to see if it is advertised. If it is advertised by a domain gateway,
it
is possible that the remote domain is not available.
Tperrno 12 is TPESYSTEM. There should be a message in the ULOG that
further describes the error.
zhangjr wrote:
I found two kind of errors in our ULOG file.
these errors often occur.can you tell me why so?
1)
ERROR: Service XXXX not available in group GROUP_YYYY
GWTDOMAIN.294184.1.0: LIBTUX_CAT:741: ERROR: Routing function failed
2)
WSH.40820.1.0: WSNAT_CAT:1042: ERROR: tpcall() call failed, tperrno= 6(or 12)
Thanks

ASA 5505 with Backup ISP

I am working with a client that currently has an ASA 5505 with two ISPs for failover using a tracked interface. I would like to configure logging so that the ASA will email us when the Primary ISP goes down and fails over to the backup. Here is what I have so far...
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
switchport access vlan 12
interface Ethernet0/2
speed 100
duplex full
interface Ethernet0/3
switchport access vlan 22
speed 100
duplex full
interface Ethernet0/4
switchport access vlan 22
interface Ethernet0/5
switchport access vlan 22
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 50.76.252.33 255.255.255.248
interface Vlan12
nameif backup
security-level 0
ip address 168.93.174.130 255.255.255.248
interface Vlan22
nameif Phones
security-level 100
ip address 192.168.3.1 255.255.255.0
logging enable
logging buffered warnings
logging asdm warnings
logging from-address [email protected]
logging recipient-address [email protected] level errors
route outside 0.0.0.0 0.0.0.0 DG-Commcast 128 track 1
route backup 0.0.0.0 0.0.0.0 DG-FirstCom 255
sla monitor 123
type echo protocol ipIcmpEcho 73.120.130.1 interface outside
frequency 10
sla monitor schedule 123 life forever start-time now
track 1 rtr 123 reachability
Let me know if you need any more info from the config; it's quite long and not sure what all is needed...
The primary interface is Outside and the backup is obviously Backup
Thanks!
Tony

Hi Tony,
As long as the event covered under 'errors' list - inaddition to the above config, you need to add..
loging mail errors
smtp-server
Check the below link for more information on ASA message logging..
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a2e04.shtml
hth
MS

Update from 10.6.8 to Lion - Wiki not working

Hey everybody,
updated a server from 10.6.8 to 10.7.3 Lion server. Most of the data is working on the new server. iCal is working as expected, but the wiki didn't work.
Reimported the data with
wikiadmin migrate -r Backup/Collaboration -g wiki
or
wikiadmin migrate -r Backup/Collaboration
On the server page I see the imported wikis, but some of the site get back an error:
Routing Error
No route matches "/wiki/4c548/site.html"
Also none od the attachments are working The link is showing up as:
https://<server-address>/wiki/static/sandbox.html#
When hovering the file it show's the right filename
Anybody ideas? How can i clear the SQL database just for that wiki an reimport the data?
Thanks a lot!

Here is the Update Log:
2012-04-18 14:23:36.302 wikiadmin[11541:307] Updating schema...
2012-04-18 14:23:36.305 wikiadmin[11541:307] Schema updates completed.
2012-04-18 14:23:36.305 wikiadmin[11541:307] Migrating...
2012-04-18 14:23:36.480 wikiadmin[11541:307] Migrating known users
2012-04-18 14:23:36.857 wikiadmin[11541:307] Generating placeholders for all known pages and wikis
2012-04-18 14:23:46.865 wikiadmin[11541:307] Found 181 pages belonging to 1 wikis and 9 users.
2012-04-18 14:23:46.866 wikiadmin[11541:307] Migrating project 'wiki' (1 of 1)
2012-04-18 14:24:06.958 wikiadmin[11541:307] Re-scanning 3 pages for pasted image/attachment URLs
2012-04-18 14:24:16.961 wikiadmin[11541:307] Copying content to real tables...
2012-04-18 14:24:24.163 wikiadmin[11541:307] Destroying migration entity and scratch tables...
2012-04-18 14:24:24.225 wikiadmin[11541:307] Done
2012-04-18 14:24:24.270 wikiadmin[11541:307] Importing user preferences
2012-04-18 14:24:34.273 wikiadmin[11541:307] Rebuilding search index...
2012-04-18 14:24:37.181 wikiadmin[11541:307] Done
2012-04-18 14:24:37.182 wikiadmin[11541:307] Migration complete
No error was given -.-

ACH - Incoming File!

Hi Sappers!!
I would appreciate if someone could provide some inputs on the following issue on ACH payments.
Scenario:
We send ACH file to bank for effecting payments. Bank (Citi) processes the file and logs the items that have error for eg: amount error, routing number error etc..Then it creates a file in ACH format called Return Item File (RIPF) which contains a list of items that got rejected while processing.
Question:
Do we need to upload RIPF in SAP. If yes, then how can we upload this information in SAP.
Appreciate your time!!
Vj

Hi Vj,
Based on the information you provided, the RIPF file gets created/generated whenever there is some incorrect info, which would be wrong amount ( in the sense that the amount is not in the place it should be), which i guess should be corrected by the print program which generates the original ACH file. In case of other errors like routing number error, you would have to check the logic behind the payment program - Most probably that would come from the house bank i.e used in the payment program, so that would be a master data correction.
In other words, you need not load the RIPF file into SAP - However based on the inputs from RIPF file, you would have to make changes to master data in SAP R/3 or make changes to the print program for ACH file to make sure that the file does not get generated (ideal situation).
Hope that helps..
Thanks,
Nandita

Prob in Order Creation

Dear All Gurus,
in the time of creating Order systems giving error "routing not found" .how to asign routing with order. i am new in pp .I am a mm consultant.pls help me out
thanks
sandip

HI,
First of all check whether routing is created or not for that order header material.
if not then you need to create it using transection ca01.
If created and still you are facing this problem then check the routing status and usage. It should be match with selection id maintain in order type dependent parameter(transection opl8) or the routing selection.
Regards
Dhaval

Help on ddr in Tux 8.1

Any help/pointers are really appreciated....
We are in the process of trying out DDR in Tux. Our version is 8.1 - 32-bit and we use view32. We have an existing server that we want to process different requests depending on data. (everything will run on the same physical server box) and in the same domain.
ubbconfig looks so:
*GROUPS
R_8411_1 LMID=srvr_1 GRPNO=310
R_8411_2 LMID=srvr_1 GRPNO=410
*SERVERS
TTR_Server SRVGRP=R_8411_1 SRVID=160 MIN=3 MAX=5
CLOPT="-A -o /usr/local/tuxedo/dev1/log/stdout -e /usr/local/tuxedo/dev1/log/stderr"
TTR_Server SRVGRP=R_8411_2 SRVID=170 MIN=3 MAX=5
CLOPT="-A -o /usr/local/tuxedo/dev1/log/stdout -e /usr/local/tuxedo/dev1/log/stderr"
*SERVICES
TTR_11D ROUTING=loc_id
*ROUTING
loc_id FIELD=loc_id
BUFTYPE="VIEW32:in_rates"
RANGES="'AAAA00' - 'MZZZZZ':R_8411_1, 'NAAA00' - 'ZZZZZZ':R_8411_2"
Everything builds and boots up just fine but when we send any message we get the following in the ULOG. Could anyone who has done this before please tell me what I am doing wrong here:
183125.srvr01!?proc.6289.1.-2: 09-03-2009: Tuxedo Version 8.1, 32-bit
183124.srvr01!?proc.6279.1.0: ttr server ready.
183124.srvr01!?proc.6279.1.0: GP_CAT:1063: ERROR: tmroute failed, could not find routing criteria of loc_id for buffer type FML32
183124.srvr01!?proc.6279.1.0: LIBTUX_CAT:4053: ERROR: Routing function failed
Thank you all,
-SRK

Hi,
We are using TUX 8.1 and i am getting the error :
LIBTUX_CAT:4053: ERROR: Routing function failed
while invoking a tpforward call.
My ubb file for the new service is below.
"NewXXInqu"
LOAD=50 PRIO=50
BUFTYPE="ALL"
ROUTING="PARTITION"
TRANTIME=90
AUTOTRAN=N
DEFAULT: LOAD=50 PRIO=50 BUFTYPE="ALL" AUTOTRAN=N
*ROUTING
"PARTITION"
FIELD="PARTITION_ID"
BUFTYPE="FML32"
RANGES="1:P1,2:P2"
Its also giving the error : GP_CAT:1064: ERROR: Routing field for 'NewXXInqu' null.
LIBTUX_CAT:1401: WARN: tpforward tpacall failure TPESYSTEM - internal system error
I have the NewXXInqu object file created,which is linked to NewXXSvr. This server NewXXSvr is up and running, and i can see that using ps -ef.
can any one please tell me what is that im missing here. What does routing field 'xx' null mean ?
Appreciate your reply,
thanks,
gopi.

XIAdapterFramework Error Routing

Similar Messages

Maybe you are looking for