XL Reporter problem with SQL 2005

Hi,
We just migrated our SQL Server from 2000 to 2005. Everything seemed OK, until we tried to run XL Reporter addon. Our SQL 2005 is 64bit edition, and I heard the 64bit version has some problem with transferring data to Excel, for example.
has anybody had the some problem? How can we solve this?
Thanks.
Andre

Hi Andre,
Check this thread: Re: XLR - Terminal Server
It should be a problem if your PL is upgrade to new.
Thanks,
Gordon

Similar Messages

Problem with SQL 2005

Hi All:
After successful export with R3Load of a ECC5.00 (Kernel 6.40 Patch level 171) when we import the data into SQL2005 SP1 and after successful import into the target database, we have some inconsistencies in several DYNPROS, we got errors like this when we run several transactions:
BZW Error 2 during compression/decompression ( UNPAC)
AB0 Run-time error "DYNPRO_SYNTAX_ERROR" occurred
and in the trace files we found:
Fri Feb 23 16:12:35 2007
***LOG BZW=> error 2          on compression/decompression using UNPACK     [dbdynp#1 @ 842] [dbdynp 0842 ]
ERROR => Involved dynpro: SAPMF02D                                 - 0101
dbdynp.c     842]
ERROR => DY-SRC_READ BUFFER: any error 4 [dgdynp.c     1225]
It seems the DYNPROSOURCE table contains bad entries, but the export/import procedure was successful, we also execute "Tools for MS SQL" successfully.
Any help will be greatly appreciated...!!!
Regards,
Federico

Hello
Your error is not one I recognize but I recommend you check this note and validate your DB settings.
Note 600027 - Installing the Corrected MS SQL Server Collation
Please do not double post - the correct forum for this thread is SQL Server
N.P.C

Crystal 8.5 connection with Sql 2005

Post Author: sgtpep
CA Forum: Semantic Layer and Data Connectivity
Hello all,I'm not sure this is the right forum group to post in, but here it goes:I have a problem when trying to print my crystal 8.5 reports through a sql 2005 native client.Some of them work just fine, but i get this error: "print job failed cannot open sql server" for others.I've been doing a little research, but i can't seem to find a definitive answer on this topic: Can/Does crystal 8.5 work with sql 2005 databases.I did find something about upgrading my drivers, but i'm not sure where to find them and what i should be looking for.Thanks in advance for your help,Eric

I see - the field notice does mention ICM 7.2(7)ES139.
Multiple occurrences of this issue have been observed since October 14, 2010
and on all Unified ICM/CCE releases. This is not a regression defect. The issue
occurs when a Microsoft SQL Server query operation is performed to compare the
'lastUpdateKeys' on AW and Central Controller/Logger, during the incremental
copying of configuration changes to the local AW. In addition, using the ICMDBA
tool to backup and restore the database with "Truncate Config Message Log"
option checked can lead to a similar issue that causes the ICM/CCE Router to
reject configuration updates. No UpdateAW restart is observed in this
situation.
I mistakenly thought it was caused by the SQL upgrade from 2000 to 2005.
By the way, regarding defect CSCtj65060, I NEVER check that "Truncate Config Message Log" option when exporting the config.
Regards,
Geoff

Problem with MSSQL 2005 maintenence plan

Hi,
I am facing a problem with MSSQL 2005 maintenance plan. I created a plan which takes full backup of all the db’s and in the same plan I added a clean up task which is suppose to clean all the files older that 1 day.
To gain compression I converted this plan to lite speed. Now the problem is Backups are running fine but the clean task is not cleaning old files. The job runs fine without fail.
Any body who has faced similar problem please let me know if have the solution ?
Thanks in advance.
Kishan

Hi in this case my date format used in backup file getutcdate() format but
to delete files i am using this script
Declare @sql varchar(250),@retention tinyint
set @retention=0
set @sql='Exec master.dbo.xp_cmdshell ''Del E:\SQL2005\Backup\*' + convert(varchar(15),getdate()-@retention,120) + '*.bak'''
Exec (@sql)
i also tried with getutcdate()
but it gives the following error.
Could Not Find \\E:\SQL2005\Backup\*2008-04-03*.bak
why i donot understand.
can any one give heads up.

IPC 4.0 Standalone with SQL 2005 Express as a database

Hello,
I am trying to setup IPC 4.0 standalone up for a training class on a XP laptop with SQL 2005 Express as the database. I keep getting login errors connecting the IPC admin.bat tool to the sql database. And yes, I know this is not 'officially' supported by SAP, but I see no technical reason why it shouldn't work and yes my port is correct. My entries are as such:
Alias: 00_230
Server: localhost
System: Microsoft SQL Server
Database Name: 00_230
port: 1433
User: ipc
password: hidden
client: 230
Is everything I entered correct? Am I missing anything that I need?
Thanks!

Hi Jeff.
You will probably have problems with the database subsystem, when you upgrade to UccX7.0.1 if the 3rd party database is af SQL2k5 server.
There is a fix for that problem, check below :
Upgrading UCCX to 7.0(1)Sr4 is failing ODBC connection to SQL 2005.
Symptom:
Upgrading the UCCX server to 7.0(1) Sr4 and OS to 2003.1.4a SR11 is failing the ODBC connection to SQL 2005 external database. (also a problem in new installations)
The error generated when trying to setup a ODBC connection to SQL 2005 database is
======
[Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
=======
Conditions:
Upgrade to UCCX 7.0(1) Sr3 or 4 and OS upgrade to 2003.1.4a SR11
Workaround:
Work around:
a) In UCCX SQL Server 2000 - Start the Client Network Utility. (cliconfg.exe is used from MSDE versions of UccX)
b) On the General tab, add TCP/IP in the list under Enabled protocols by order. (make sure its first)
c) Click the Alias tab, and then click Add. Under Network libraries, select TCP/IP.
d) In the Server name text box, type the IP address of the server that is running SQL Server
2005.
Note:
If port other that 1433 is being used Click the check box to clear the Dynamically determine port option, and then type the port number of the instance of SQL Server 2005 in the Port number text box.
Regards
\Søren Lavard

Report region with sql query

Hi
I have a report region with sql query. There are two regions in page. On top of page, user enters data and after that second region show enterd data which is report region
based on sql query.
Now,when this page is opned, as user had not entered any thing, report region shows "no data found" message. Is it possible to remove that message or
may i conditionally disaply report region i.e if data is inserted then only report region is dispalyed.
Thanks

>
i was trying with select count(1) in expression.
>
Just for your info, COUNT() (without any grouping obviously) with always return 1 row. If there are no result for the query then 1 row will be returned with a value of zero - so there are results returned.
Secondly, why were you using COUNT(1) rather than COUNT(*)? That is is faster is a very common misconception and not true. If you need to know how many rows have been returned, use COUNT(*). If you need to take nulls into account (ie. not include them in your count) then use COUNT(column_name) and name the column that you are interested in specifically.
Cheers
Ben

Problem with SQL connection and a Collection

hi all,
I have two problems with sql...
1. how can I assign the values of a resultset to a collection?
2. how can I close the sql connection, because when I close the statement and connection error shows me in the resultset
thanks!

Hello Pablo,
RetrivingResults In Collection:
1)   use getObject method, and assign it to collection.
          Collection c_obj=new ArrayList();
         while(rs.next())
                c_obj.add(rs.getInt(Project_ID), rs.getString(Project_Name));
Closing ResultSet
2)               The close() methos of ResultSet closes the ResultSet object, like bellow
                ResultSet rs = stmt.executeQuery("SELECT a, b FROM TABLE2");
                rs.close(); //Closes the result set

Reporting problems with iTunes

Does anyone know how to report problems with updates to iTunes to Apple? I cannot find any way to contact them to alert them to bugs and problems.

And if you're an ADC member (the Online membership is free), you can use Apple's Bug Reporter.

HT4718 are there any reported problems with safari with the new OS X Mavericks?

My early 2008 iMac running OS X 10.9.2 all of the sudden has problems loading pages in safari. The problem timing is the same as the upgrade to Maverick. The computer is connecting to wifi and other devices such as iPhones and three PCs have no problems. The ISP is Xfinity. Are there any reported problems with Maverick and Safari?

Try searching.

Chrome (Windows NT 6.1 6.2) users reporting problems with loading and mouseevents - any insights?

For several years now, I have created simple studies (I do psychological stuff) to run online, recruiting participants through Amazon Mechanical Turk (AMT). I have had no problems until recently (last 6 to 9 months). Now, some AMT users are reporting problems with stimuli loading or buttons not responding immediately when clicked (e.g., advancing to a new screen). What is common amongst all the users experiencing problems is that they use Chrome, and they also tend to be Windows NT 6.1 or 6.2 users running Flash Player 12.0. But not a single Firefox, Safari, or MSE user has ever reported an issue. I'm just looking for help in troubleshooting this problem. Again, the studies I run are incredibly simple (e.g., no videos being loaded from server, etc.), mostly word presentation where I record time and x,y coordinates of mouse movements as they respond to questions. Would attempting to publish for another target version of Flash Player help? The default setting is to publish the .swf and .html wrapper for Flash Player version 11.7. Any ideas? I also use version 13.0.1 of Flash Professional CC to create my studies if it helps.

This is helpful. Thanks. So it would be to my advantage to play around with something like SWFObject 2?
http://www.adobe.com/mena_fr/devnet/flashplayer/articles/swfobject.html
Or is there something else you would recommend?
What I've been doing is a far cry from actual web development, but quite interested in learning more. This swfobject seems to get at what you are suggesting (I think).

Xp_logininfo "Installation problem on windows 2003 with Sql 2005"

Hi every one
I am facing a problem during the installation of Solution Manager 4.0 on Windows 2003 server with Ms Sql 2005, I received the following error
Msg 15404, Level 16, State 19, Procedure xp_logininfo, Line 60.
Its some how look likes that the user "SID"ADM
Can any one give me a clue
thanks
Kind Regards
Sohail

Hi All,
This would solve your problem
First of all this error is MSSQL error.
When you perform an action on an instance of SQL Server that requires SQL Server to resolve the credentials of a Microsoft Windows NT domain user account, you may receive an error message that is similar
Server: Msg 8198, Level 16, State XX, Procedure <Stored Procedure Name>, Line <line Number>
Could not obtain information about Windows NT group/user '<Domain\Account Name>'.
To resolve the credentials of a Windows NT domain user account, SQL Server uses the xp_logininfo system stored procedure. Here is a list of the common scenarios where you may notice that the xp_logininfo system stored procedure fails and causes the 8198 error.
When you use an xp_sendmail extended stored procedure.
When you set up replication.
When you run a SQL Server Agent job.
SQL Server may run the xp_logininfo system stored procedure to retrieve information about the Windows domains and the user accounts, even if the user does not do so explicitly. Therefore, if you receive an 8198 error message and the error message mentions the xp_logininfo system stored procedure as the procedure, you must use SQL Profiler to trace and to troubleshoot the exact point of failure.
You can go through this link for more info...
http://support.microsoft.com/?kbid=834124
Feel Free to Revert back...
--Thanks and Regards,
Ragu
ERP,
Suzlon Energy Limted, Pune
Extn: 2638
+919370675797
I have no limits for others sky is only a reason

Hi all problem with sql server 2008 in sap b1 2005 PL38,42

Hello Sir,
We are also facing this problem. Our client has purchased SQL 2008 & we have installed SAP B1 PL 05 & also we have to upgrade it to PL 26 atleast for installing TDS Add on 4.8 so that Project runs smoothly.
Can u specify the status? i.e. at what stage is that upgradation? or by how much time this problem will be solved? Bcoz we are on the stage of test go live & we cant take back up of database of SQL 2008 & restore it in SQL 2005. We will have to do all settings in new company with database in SQL 2005.
Pls reply at the earliest.

Hi Nilesh,
I wonder how you got B1 installed properly on MSSQL 2008, as MSSQl 2008 comes with a new Native Client connection.
Anyway I see two options:
(1) Keep the system as it is, meaning no upgrades of B1 and pray nothing will happen as long MSSQL Server 2008 is not supported.
(2) In order to get a supported environment the better option would be, to try a combination of CopyExpress and DTW and get all data and settings transfered into a new MSSQL 2005 based Database.
Kind regards
Mario Schoenberg
Senior Support Consultant
SAP Business One Forums Team

URL problems with SQL Server Reporting Services 2012 with wildcard SSL certificate

Hi,
I have single server, domain member, with SQL Server 2012 SP1 Reporting Services.
I am trying to get work with url: https://reports.mydomain.com
I have valid wildcard certificate (*.mydomain.com) implemented and configured URLs in Configuration Manager.
https://reports.mydomain.com/ReportServer - works fine
https://reports.3pro.hr/Reports/ - I got error:
The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
In rsreportserver.config I have:
<Add Key="SecureConnectionLevel" Value="2"/>
When looking my ReportServerService_date.log file I have something like:
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server internal url https://localhost:443/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server external url https://serverhostname:443/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using url root https://reports.mydomain.com/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server internal url https://localhost:443/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server external url https://serverhostname:443/ReportServer.
configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using url root https://reports.mydomain.com/ReportServer.
Also, error shown in log file:
appdomainmanager!ReportManager_0-2!4c50!03/10/2013-20:24:53:: e ERROR: Remote certificate error RemoteCertificateNameMismatch encountered for url https://localhost/ReportServer/ReportService2010.asmx.
ui!ReportManager_0-2!4c50!03/10/2013-20:24:54:: e ERROR: System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
The remote certificate is invalid according to the validation procedure.
Btw, is there a way to delete/disable access using https://localhost and/or servername (not FQDN) since SSL will not work in this way for me, and I want access only by full url - https://reports.mydomain.com , not localhost ..
-- Hrvoje Kusulja

I spent one of my 4 free support incidents with Microsoft (part of MSDN subscription) this year to get this investigated. The tech support person helped me through several issues but had to leave to attend some training, and I got past the last hurdle
before she called me back. Here are the steps that resolved this issue for me. I know for sure that step 5 was necessary. Step 1 may not apply to you, and steps 2-4 may or may not have been necessary (they didn't immediately fix the issue,
but I didn't roll them back either so they may have been necessary.)
Step 1:
Ensure you are editing the correct rsreportserver.config file. I had been making changes to a file that was installed in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\14\WebServices\Reporting, but that was a rsreportserver.config
file for some sharepoint integration that I'm not using. The correct path on my system was E:\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config, but yours may vary. If you can't figure it out, look in the registry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
SQL Server\MSRS11.MSSQLSERVER\Setup in the key named SQLPath, and then go to the ReportServer subdirectory of that path.
Step 2:
In rsreportserver.config, ensure that SecureConnectionLevel is set to the value 3. Was set to 0 in my configuration. Corrected line in your rsreportserver.confiog file should look like:
<Add Key="SecureConnectionLevel" Value="3"/>
Step 3:
In rsreportserver.config, add the correct value to the <URLRoot> element (which already exists in the file.) In my configuration, this value was blank. The value should be the fully qualified path to your report server, with a hostname that
is valid for your certificate. For example, if my cert matches *.mydomain.local:
<UrlRoot>
https://myserver.mydomain.local/ReportServer
</UrlRoot>
Step 4:
Ensure that your certificate exists in Trusted Root Certification Authorities in certmgr for the local machine. I had the certificate installed as a Personal certificate for the local machine, which I still think was correct (the certificate wasn't actually
the problem and worked correctly for Report Server, and the failure was caused by SSRS incorrectly making a https request to a localhost URL), but she had me remove the certificate from Personal and add it to Trusted Root Certificate Authorities. That
broke things and the cert was no longer listed as a cert I could bind to, so we then copied it so it existed in both Personal and Trusted Root Certificate Authorities. This is how I left it, not sure if that was necessary.
Step 5:
This was the fix that finally got things to work. In rsreportserver.config, add the same value to the <ReportServerUrl> element (which also already exists in the file) that you added in step 3. In my configuration, this value was also blank.
The corrected value should be the same as in step 3, for example:
<ReportServerUrl>
https://myserver.mydomain.local/ReportServer
</ReportServerUrl>
Then restart your report server (stop & then start in Report Server Configuration Manager), and the problem should go away. At least it did for me.
Good luck!

HA Installation of ERP 6 With SQL 2005 Server Problem.

hi ,
i have two blade server with windows 2003 Enterprise and cluster configure on them as prescribe by the note of Microsoft.
now i have installed MS Sql 2005 Server as said by the SAP Documentation on first node and it was sucessfull . after that i installed ABAP (ASCS) SCS on first node and it was installed too . now i am stuck at the process of FIRST MSCS NODE step
the installation note says :-
7.4.5Configuring the First MSCS Node
To configure the first MSCS node so that it functions properly in MSCS, you have to run the cluster configuration option offered by the SAPinst tool. When you run this option it:
Creates the SAP cluster group
Copies tools to the SAPCluster directory
Sets the SAPService to manual
Makes sure that the SAPOsCol service starts from the SAPCluster directory
this says cluster configuration option but i can't find it any where and i don't know how the %windows%/sapcluster dir creates do i have to create it manually if so then how, the sap document says as follows :-
SapCluster Directory
In an SAP cluster installation, an additional directory u2013 %WINDIR%\SapCluster u2013 is created under the system directory.
This contains all the SAP files required by all MSCS cluster nodes, independently of the MSCS node the SAP instance is running on. The files are database tools and program files (executables) used by the operating system monitor (SAPOsCol).
The directory is added to the path variable of the user <sapsid>adm.
can any one help me in this .
thanks in advanced

thanks for response , at the phase FIRST MSCS NODE it stuck
the R3CLUS.LOG file is as follows :-
24.8.2010, 13:14:26, ntclsapclus.cpp, 213, Entry: InstallSAPResourceType
24.8.2010, 13:14:26, ntclsclinst.cpp, 58, Entry: Sclinstsrct::Create
24.8.2010, 13:14:26, ntclsclinst.cpp, 79, CreateClusterResourceType RC= 183
 Cannot create a file when that file already exists.
24.8.2010, 13:14:26, ntclsclinst.cpp, 91, DllRegisterCluAdminExtension RC= 0
24.8.2010, 13:14:26, ntclsclinst.cpp, 102, DllRegisterServer RC= 0
24.8.2010, 13:14:26, ntclsclinst.cpp, 116, Exit: Sclinstsrct::Create RC= 0
24.8.2010, 13:14:26, ntclsapclus.cpp, 215, Exit: InstallSAPResourceType RC= 0
and SAPINST.LOG file say's in last lines:-
INFO 2010-08-24 13:15:26.655
Execute step dGetSAPClusterParameters of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0
WARNING[E] 2010-08-24 13:15:26.670
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
ERROR 2010-08-24 13:15:26.824
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
and SAPINST_DEV.LOG say's in last lines :-
WARNING[E] 2010-08-24 13:15:26.670
 CJSlibModule::writeError_impl()
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
TRACE 2010-08-24 13:15:26.793 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2010-08-24 13:15:26.824 [sixxcstepexecute.cpp:950]
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
TRACE 2010-08-24 13:15:26.840 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > MS SQL Server > High-Availability System > First MSCS Node. You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/HA/MSCS-A.
TRACE 2010-08-24 13:15:26.840 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
help needed........
Edited by: Eric Brunelle to fix HTML tags on Aug 24, 2010 9:15 AM

Crystal Report problem with VS2005

Hi
I have installed evaluation copy of crystal report 2008 for .net. I am using VS 2005.
I have created reports using default crystal report that comes with VS 2005(version 10).Reports are upgraded to version 12 and running fine, but I am not able to use some design time features of report with .net. and these are working well with crystal report s/w.
1.Tool tip for bar chart doesn't displayed.Where as It displayed in crystal report.
2.Series option in preview mode to convert particular bar to line is not available.Where as this option is available in crystal report.
Please suggest.
Thanks in advance.
Regards
Kavita Choure
Palewar Techno Solutions
(Mobile Solutions for Your Business)
[http://www.palewar.com]

Hi Falk
Thanks for your prompt response.
Both embedded designer in VS as well as application have the same problem.
when I open sample report (.rpt) in embedded designer it has the same problem.
I also tried after uninstalling crystal report basic then reinstalling crystal report 2008 but it doesn't solve the problem.
please let me know if you have any more suggestions?
Thanks in advance.
Regards
Kavita Choure
Palewar Techno Solutions
(Mobile Solutions for Your Business)
[http://www.palewar.com]

XL Reporter problem with SQL 2005

Similar Messages

Maybe you are looking for