XLR b1 2007 and excel 2007 excel sheet is empty

hi experts,
i like to use xlr in b1 2007 with excel 2007.
after getting a fail in xl reporter, i change the security settings in excel 2007.
now the excel sheet opens, but there are no values in it.
for example, i made only a query about the business partner (the result is only one column) and like to
import the result in excel 2007 , there is only a headline named 'business partner' . And the column you could see in the xlr filled with the business partner names is empty.
sap b1 and excel 2007 runs on terminal services published by citrix.
has someone an idea to solve the problem?
with greetings from hamburg
michael

Hi Michael,
Please make sure that the following steps are performed:
+COM Add-ins
(Excel 2007)
Go to excel
Office button -> Excel Options button
Add-Ins
Manager: COM Add-ins -> Go
SAP Business One XL Reporter should be selected.
+Disabled Items
(Excel 2007)
Go to excel
Office button -> Excel Options button
Add-Ins
Manager: Disabled Items -> Go
SAP Business One XL Reporter should not be listed.
If it is please select it and click Enable button.
+Macro Visual Basic Project
(Excel 2007)
Go to excel
Office button -> Excel Options button
Trust Center -> Trust Center Settings...
Macro Settings -> Trust access to the VBA project object model
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team
Edited by: Ladislav Meszaros on Feb 25, 2009 10:41 AM
Edited by: Ladislav Meszaros on Feb 25, 2009 10:41 AM

Similar Messages

Word 2007 and Outlook 2007 error 1605

Hi,
I keep getting this error with Word 2007 and Outlook 2007:
Microsoft Office word can't open thesaurus. Windows Installer error 1605.
Please advise on how to fix this.

Thank you. Thank you. Thank you. In all my searching for this problem, Yerger's was the only one that made much sense. And it worked! I no longer get an error when I open Outlook, and now I have my thesaurus back in Word!.
I suspect it will also fix the problem I was getting sometimes in Word that some kind of proofing tools were not available (although that was intermittent so I can't really tell for some time.)
Your solution was easy to follow and I like the explanation. I am usually suspicious of making changes to the registry based on an unknown person's suggestions. With this I could easily see that it was the relevant key.
For those not sure how to edit their registry: From the Start Menu, select Run, and type in regedit
Thanks!

Do you know if it's possible to generate Word 2003 files from RoboHelp if we're using Office 2007 and RoboHelp 2007?

Do you know if it's possible to generate Word 2003 files from
RoboHelp if we're using Office 2007 and RoboHelp 2007? We are
thinking of upgrading, but have customers that would still require
Word 2003 formats because they won't have 2007 installed.
Thanks!

Hi NewtoRobohelp
Unfortunately I don't have Office 2007 in front of me to test
with. But I'm thinking that as long as Office 2007 still produces
the same formats as 2003, you could do it this way.
From RoboHelp 7 and using Office 2007, generate Printed
ouptut. Open said printed output in Office 2007 and perform a Save
As. Save the document as a RTF (Rich Text Format) document.
RTF is more universal. So I'm thinking this may be a possible
way around it. There is also the possibility that Word 2007 offers
up an ability when saving a file to save in an older format.
Cheers... Rick

Problem with Mail Merge in Word 2007 and Outlook 2007

Hi,
I just found out about the function to generate mail merged PDFs and send them via email. I tried that using Outlook 2007 as the email client, but it seems to me that Acrobat generates RTF emails instead of plain text. That causes many email clients, except Outlook, just to display a file called winmail.dat instead of the actual PDF file.
I already checked the settings in Outlook and made sure that new mails are started in plain text mode. If I do this manually the email becomes plain test. But not automatically with Acrobat.
Does anybody have a solution on that? I'm using Adobe Acrobat 9.1.
Best regards,
Johannes

Hi andré, I guess the issue is coming from the fact that you selected "AllPartiesInvolved" and that may contain any numbers of entries. So when you test your webservice, you put a key and then get a result for that key, and in that case you might get "element1" until "element3" for example if there was 3 partners involved in you activity.
But, when you design your template, you don't have a key at that moment, so in the Web Service structure, you have "items" which stands for all the possible entries you might retrieve at runtime. I guess you could use an index in your template to specify which item you need, but this is quite hasardeous, so i would be you, I would not design my web service to use "AllPartiesInvolved" but rather a specific Partner type like contact person for instance.
Regards,
Xavier

Current Compatibility between WT-2007 and B1-2007

Do we have a current list of compatibility?
I know WT works with 2007 PL05. And I know it doesn't work with PL06. I'm not sure about anything before/after those patch levels though.
Thanks

The list is on the download page of web tools server
<a href="https://websmp102.sap-ag.de/~sapidb/011000358700007392752004E">Software download page</a>

Search function not fully working with Exchange 2007 and Outlook 2007

The Search function in outlook is partly available.
I can only search into the inbox with basic search.
Advances search functions an dsearching into subfolders is not available.
As you can see in the screenshot, the options are greyed out.
Situation:
W2k8R2 + Exchange 2007 (windows search role not installed)
W2k8R2 + Outlook 2007 (windows search role not installed)
Question:
- Does the search role need to be installed on the exchange server to provide full search functionality?
- Does the search role need to be installed on the client (server) to get the search funtion fully available in Outlook?
I can't find this awnser if I search in google of technet, so hope someone can help me with this.

As I already wrote to you, the current forum is for developers. I'd recommend asking non-programming questions in the
Outlook IT Pro Discussions forum instead.

Infopath 2007 and SharePoint 2007 error with Web Service Submit and Recieve

I have an InfoPath form with code. The code submits the form to SharePoint and to SQL DB through Web Service. The form has some workflow. When form is in a "New" state if submits to SharePoint and Database through custom web service. Works fine
from both Client and SharePoint browser form. The database ID is returned to the form and then stored in a field. In second stage of workflow additional fields are shown for Supervisor to fill out. I then have an "update" web service to update the
database. I set all the field values in the Web service then execute both the update Web Service and the SharePoint submit. I get an error (both if running from desktop or SharePoint) Error is
"The string '' is not a valid AllXsd value"
I know sometimes this happens with dates. But I've got all the dates set. The funny thing is in the first submit there are 2 dates in the second submit there is one date. All are set the same and on the first submit no problem submits correct dates to SQL
database through web Service. Second submit has 2 Boolean fields that I also default to a value of false. I've debugged and looked at all the values and everything has a value. I use delete NIL to make sure value in Web Service is set. I can save the data
in the form but not submit it because I get the web service error. If I save the data in form and download it and copy all the values in the XML to my Web Service and invoke the web service works fine. So there is no error in the web service. The first
submit submits both dates and some integer values. The only difference in second is the Boolean value but it is set to default of false for all checkboxes. I'm going out of mind trying to see what could be wrong. Also difference with second
is it sends in the ID of the record that was set in form by result of first submit query sending back the DB value. That value is an integer but I also set correctly.
Susan J. Swanger

Hi Somatco,
According to your description, my understanding is that you got an error when you ran report with xml type datasource.
Please set the xml datasource credential to Use Windows Authentication (integrated security). More information, please refer to the link:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/530c29ab-7ed5-4c36-816a-910c0b51f4bd/xml-data-source-unable-to-authenticate-using-windows-authentication?forum=sqlreportingservices
Here are some similar posts for you to take a look at:
http://www.symantec.com/business/support/index?page=content&id=TECH190935
http://social.msdn.microsoft.com/Forums/en-US/285e4e8c-d05c-48f8-b4f3-9d87988d823e/an-error-has-occurred-during-report-processing-rsprocessingaborted-query-execution-failed-for?forum=sqlreportingservices
In addition, as this issue is related to SQL Server Reporting, I commend you create a new thread in SQL Server Reporting forum, more experts will assist you with SQL Server Reporting.
SQL Server Report forum:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Exporting to Powerpoint 2007 using the 2007 formats

I'm currently running Xcelsius 2208 and Office 2007. Because I was the first to get Office 2007 I've had to continue saving in the Office 97-2003 format (.ppt). Now that everyone has caugth up if I save in the .pptx or .pptm format the .swf appears to disappear after the file is saved and reopened. Does the .swf only run in the .ppt mode?

Hi Maureen,
You have to keep saving as PPT because PowerPoint does not support embedded Adobe Flash files in a PPTX (Office 2007).
Refer to the Export to Microsoft Word 2007 and PowerPoint 2007 in the General Issues section of the Xcelsius 2008 release notes.
Regards,
Matt

Using Powershell Script Run simple query in MS Access 2007 and export the results of query to Excel

Hi Experts,
I have a Access 2007 DB file and 2 Big tables inside that (bigger than the size that can be easily handled by MS Excel 2007).
My requirement is automate using powershell scripts the below things.
1. Create a SQL query in Access DB and save that in access DB
2. Run the saved query and export the result in excel sheet where I can create the charts and Pivots. Thanks in advance
Prajesh

Do you have to use the Access query, couldn't you just recreate the query in Powershell? Here's a link with good info that references an existing script for querying an Access database:
http://blogs.technet.com/b/heyscriptingguy/archive/2009/08/13/hey-scripting-guy-can-i-query-a-microsoft-access-database-with-a-windows-powershell-script.aspx
Once you have your dataset you can pipe it to
Export-Csv -NoType c:\pathtofile\output.csv

Excel 2007 and Smart View 9.3.1.4.041

Dear Experts,
We are now working with Excel 2007 and Smart View 9.3.1.4.041, and encounter the problem that ervery time open the protected excel file there would be the warning message "Drawing Objectes in one or more sheet(s) in the workbook are protected. Please unprotect them and try to save again."
Can any one suggest with;
1. How to set the Excel security settings for Excel 2007 to work for smart view?
2. How to avoid the message mentioned above while working with Excel 2007?
3. How to create a protected Excel file to work with Smart View 9.3.1.4.041 both in Excel 2003 and Excel 2007?
Tks
Edited by: Moonlight on May 19, 2010 10:00 AM

I've experiencied similiar problems, though other users may have found a better solution, I've unlocked the spreadsheat, refreshed, and then relocked via a VBA macro. A button object at the top of the spreadsheet was added to make it easier for the users use as well. If there is a better solution I am very interested in this as well.
JTF

Information of Print Area is missing in VB6 Addin of version Excel 2007 and Excel 2010

Hallo,
I have a problem with my old VB 6 COM Addin. My document has Print Area, but when I use my addin to open this document. The information of print area is lost.
This problem takes place only in the following situations.
If the PrintArea is set in Excel 2007 and 2010, it will be missing. But in Excel 2003 without problem.
From the code, the ".ActiveSheet.PageSetup.printArea" is always empty, although when the print area is configurate in Excel 2007 and 2010
What is the possible reason of this problem?
Thanks very much.

There are several things I don't follow in the details you gave
"I click an excel document in the third-part program and Excel 2007 will be open automatically"
- Describe the 3rd party program you open the workbook in if not Excel"
- What do you mean by "click and Excel document", what do you click and where is the document
- Why click on an Excel document (workbook, worksheet something else?) to get a 3rd party app to automate Excel, then does some other workbook load?
It's very confusing!
Did you try the code in VBA in the instance of the workbook whose sheet you want to return the Print Area
Re: Excel Object Library is 9.0
Did you set a reference to XL-9 in the test app with my code then transfer to a different system with 2007?
However, a ref to xl-9 shouldn't be a problem if the code compiled with that ref. If the app/dll is transferred to a different system it will pick up the Excel GUID in that system, which is exactly the same for all versions since Excel97. The only time it
would be an issue is if code compiled with a new object model is not supported when used with an older Excel object model.
The fact my code appears to work without error returning the message "Print Area not defined" suggests it is referring to a different workbook, ie one in which the Print-Area has not been defined. Double check which workbook it is referring to,
eg
Private Sub cbPrintArea_Click(ByVal Ctrl As Office.CommandBarButton, _
CancelDefault As Boolean)
Dim ws As Excel.Worksheet
Dim s As String, s2 As String
On Error Resume Next
s = xlApp.Caption
If Err.Number Then
MsgBox "xlApp error " & vbCr & Err.Description
Exit Sub
End If
Set ws = xlApp.ActiveSheet
s2 = ws.Parent.Name & vbCr & _
ws.Name & vbCr & _
ws.Range("A1").Value & vbCr
If Err.Number > 0 Then
MsgBox "failed to reference ActiveSheet"
Else
s = ws.PageSetup.PrintArea
If Err.Number Then
MsgBox Err.Description
Else
If Len(s) = 0 Then s = "Print Area not defined"
MsgBox s2 & vbCr & s
End If
End If
End Sub
This should confirm the workbook name, activesheet name and value in A1 (before running maybe add the current time in A1 with ctrl-shift-; in the same workbook as the print-area has been defined)
Peter Thornton

Conditional format with large data fails and show error as "Selection is too large" in Excel 2007

I am facing a issue in paste special operation using conditional formats for large data in Excel 2007
I have uploaded a file at below given location.
http://sdrv.ms/1fYC9qE
The file contains two sheets, Sheet "Data" contains the data on which formats are to be applied and sheet "FormatTables" contains the format tables which contains conditional formating.
There are two table in "FormatTables" sheet. Both have some conditional formats applied on it.
Case 1:
1. Select the table range of Table1 i.e $A$2:$AV$2
2. Copy it
3. Goto Sheet "Data"
4. Select data area i.e $A$1:$AV$20664
5. Perform a paste special operation on full range and select "Formats" option while performing paste special.
Result:
It throws error as "Selection is too large"
Case 2:
1. Select the table range of Table2 i.e $A$5:$AV$5
2. Copy it
3. Goto Sheet "Data"
4. Select data area i.e $A$1:$AV$20664
5. Perform a paste special operation on full range and select "Formats" option while performing paste special.
Result:
Formats get applied successfully.
Both are the same format tables with same no of column and applied to same data range($A$1:$AV$20664) where one of the case works and another fails.
The only diffrence is Table1 has appliesTo range($A$2:$T$2) as partial of total table range($A$2:$AV$2) whereas the Table2 has appliesTo range($A$5:$AV$5) same as of its total table range($A$5:$AV$5)
NOTE : This issue is only in Excel 2007

Excel 2007 No Supporting formating to take a formatting form another if source table has more then 16000 rows and if you want to do that in more then it then you have ot inset 1 more row in your format table to have 3 rows
like: A1:AV3
then try to copy that formating and apply
Solution Case 1:
1.Select the table range of Table1 i.e AV21 and drage it down to one row down
2. Select the table range of Table1 i.e $A$2:$AV$3
3. Copy it
4. Goto Sheet "Data"
5. Select data area i.e $A$1:$AV$20664
6. Perform a paste special operation on full range and select "Formats" option while performing paste special

Excel 2007 VBA, problem setting Sheet Visibility in BeforeSave event after Office updates during mid Dec 2014

After update of Office 2007 during mid December 2014, I have a Macro that does not work properly - which it did before the update.
The Macro is used to make sure that users have Macros enabled when working on the file. The logic basically does the following:
=> In the "OnOpen" event, set all "work sheets" as Visible, and set the "Macro Warning sheet" to non-visible.
=> In the "BeforeSave" event, set the "Macro Warning sheet" as Visible and set all "work sheets" as non-visible.
After the mid December update of Office 2007, the "OnOpen" part still works fine. The "BeforeSave" part does NOT work properly if the save action is triggered by using the shortcut key "CTRS+s". However, if saving the file
using the "Save" option in the menues, the "BeforeSave" action works fine.
Does Microsoft have a fix for this problem? I am not entierly sure exactly which update/KB that caused this.
To recreate the problem, put the following code into the "thisWorkbook" module, and make sure that one sheet has the codeName "wshForceMacros". Open the file, enable Macros, then save the file using the keys "CTRL+s". The macro
now hangs on the row "wshForceMacros.Cells(2, 1).Select" since the wshForceMacros sheet has not become properly visible...
Option Explicit
'ON OPEN
Sub Workbook_Open()
Call ShowSheetsAfterOpen
End Sub
'ON SAVE
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
Call HideSheetsBeforeSave
End Sub
'ON SAVE
Sub HideSheetsBeforeSave()
Dim oSheet As Worksheet
'Show Macro Lock sheet
wshForceMacros.Visible = xlSheetVisible
wshForceMacros.Activate
wshForceMacros.Cells(2, 1).Select
'Hide all work sheets
For Each oSheet In ThisWorkbook.Worksheets
If oSheet.CodeName <> "wshForceMacros" Then
If oSheet.Visible = xlSheetVisible Then
oSheet.Visible = xlSheetVeryHidden
End If
End If
Next oSheet
End Sub
Sub ShowSheetsAfterOpen()
Dim oSheet As Worksheet
Dim bSaved As Boolean
'Show all work sheets
For Each oSheet In ThisWorkbook.Worksheets
If oSheet.Visible = xlSheetVeryHidden Then
oSheet.Visible = xlSheetVisible
End If
Next oSheet
'Hide Macro Warning Sheet
wshForceMacros.Visible = xlSheetHidden
End Sub

Hi,
This is the forum to discuss questions and feedback for Microsoft Excel, I'll move your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Blank Excel 2007 sheet when I open KP06

Hello,
Has anyone encounter this problem were you run tcode KP06 and two excel sheet comes up? the excel sheet with your data but in addition a blank excel sheet? It is kind of annoying to get rid of it every time.
We have Excel 2007
We are running on 7.1 SAP version.
We were fine up until two weeks ago. Is there something I have to do with SAP or Excel?

No feed back, it appears that it is an SAP problem...

The content type for office excel 2007 in jsp page and the mime-type in we

Hi,
In my system MS Office 2007 is installed. I am trying to generating excel sheets from JSP page by setting the content type "application/vnd.ms-excel" in jsp page and as well as in web.xml file. I am getting the below message
The file you are trying to open, 'xxxxxxxx.xls', is in a different format than specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now?
Then finally the excel file is opening and displaying properly. If in my system MS Office 2003 is installed , then the above message is not coming.
I have changed the content type according to Excel 2007 <%@ page contentType= "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet" %> and in web.xml file the mime type to
<mime-mapping>
<extension>xlsx</extension>
<mime-type>application/vnd.openxmlformats-officedocument.spreadsheetml.sheet</mime-type>
</mime-mapping>
even the content type is changed according to office excel 2007 , i am getting the same above message.
My client is asking not to display the above message. So how to prevent that message ?
It's very great if any body reply me as soon as possible.

Hi Akash,
I am not using the POI. I am generating the excel sheet using the below code.
<jsp:directive.page import="java.util.Map" />
<jsp:directive.page import="lehman.ra.Report.ReportDefinition" />
<jsp:directive.page import="lehman.ra.RAUtilBean" />
<jsp:directive.page import="java.util.ArrayList" />
<jsp:directive.page import="lehman.util.GeneralUtil" />
<jsp:directive.page import="lehman.admin.report.AdminHtmlReportFormatter"/>
<jsp:directive.page import="lehman.helper.irprod.IRProdHelper"/>
<%@ page contentType= "application/vnd.ms-excel" %>
<jsp:directive.page import="java.util.Iterator"/>
<jsp:directive.page import="java.util.HashMap"/>
<%
     String strTradeDate = (String) session.getAttribute("TradingDate");
     String sContextPath = request.getContextPath();
     IRProdHelper irHelper     = new IRProdHelper();
     String sReportFormat = "E2E";
     String subtab1 = request.getParameter("subtab1");
     if (subtab1 == null)
          subtab1 ="";
     Map report_Ids    = (Map) session.getAttribute("ADMIN_E2E_REPORTS");
     AdminHtmlReportFormatter formatter = new AdminHtmlReportFormatter();
     ArrayList contentData = new ArrayList();
     ArrayList headerData = new ArrayList();
     ArrayList metaData    = new ArrayList();
     Map resultMap            = null;
     String headerString       = "";
     String contentString = "";
     String reportId            = "";
     int titleSpan         = 5;
     if( report_Ids!=null && report_Ids.size() > 0){
          Object oReportObj      = null;
          Iterator rowIter = report_Ids.keySet().iterator();
          RAUtilBean raUtilBean = new RAUtilBean();
          ReportDefinition rdef = new ReportDefinition();
          while ( rowIter.hasNext() ){
               oReportObj = rowIter.next();
               reportId = oReportObj.toString();
               System.out.println("**************reportId="+reportId);
               resultMap = (HashMap) report_Ids.get(oReportObj);
               if(resultMap == null )
                    continue;
               if(resultMap.size() > 0 ) {
                    contentData          = (ArrayList)resultMap.get(GeneralUtil.CONTENT_DATA);
                    headerData          = (ArrayList)resultMap.get(GeneralUtil.COL_METADATA);
                    metaData          = (ArrayList)resultMap.get(GeneralUtil.METADATA);
                    rdef = new ReportDefinition();
                    raUtilBean.setReportAttributes(rdef, headerData, metaData,reportId, sReportFormat);
                    titleSpan = raUtilBean.findMaxCol(contentData, rdef.getDisplayCols());
                    if("51031".equals(reportId)){
                         if(resultMap.get("HIDE_ETA")!=null){
                              boolean hideETA = ((Boolean)resultMap.get("HIDE_ETA")).booleanValue();
                              formatter.setHideETA(hideETA);
                              if(hideETA){
                                   titleSpan = titleSpan-1;
                    rdef.setMaxCol(titleSpan);
                    headerString = formatter.constructHeadingForE2E(rdef, headerData);
                    contentString = formatter.constructContentForE2E(rdef, contentData, strTradeDate, sReportFormat);
%>
<html xmlns:o="urn:schemas-microsoft-com:office:office"
     xmlns:x="urn:schemas-microsoft-com:office:excel"
     xmlns="http://www.w3.org/TR/REC-html40">
     <head>
     <meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
     <meta name="ProgId" content="Excel.Sheet"/>
     <meta name="Generator" content="Microsoft Excel 9"/>
     <link rel="File-List" href="./Test33_files/filelist.xml"/>
     <link rel="Edit-Time-Data" href="./Test33_files/editdata.mso"/>
     <link rel="OLE-Object-Data" href="./Test33_files/oledata.mso"/>
     <link href="<%=sContextPath %>/llehman.css" rel="stylesheet" type="text/css">
     <link href="<%=sContextPath %>/llcontent.css" rel="stylesheet" type="text/css">
     <style>
     <xsl:comment>
     table
          {mso-displayed-decimal-separator:"\.";
          mso-displayed-thousand-separator:"\,";}
     .style0
          {mso-number-format:General;
          text-align:general;
          vertical-align:bottom;
          white-space:nowrap;
          mso-rotate:0;
          mso-background-source:auto;
          mso-pattern:auto;
          color:windowtext;
          font-size:10.0pt;
          font-weight:400;
          font-style:normal;
          text-decoration:none;
          font-family:Arial;
          mso-generic-font-family:auto;
          mso-font-charset:0;
          border:none;
          mso-protection:locked visible;
          mso-style-name:Normal;
          mso-style-id:0;}
     .xl21
     {mso-style-parent:style0;
     color:black;
     font-size:8.0pt;
     font-family:Arial, sans-serif;
     mso-font-charset:0;
     border-top:.5pt solid silver;
     border-right:.5pt solid silver;
     border-bottom:.5pt solid silver;
     border-left:none;}
     .xl24
          {mso-style-parent:style0;
          mso-number-format:"\#\,\#\#0\.00_\)\;\\$\#\,\#\#0\.00\\$";}
     .xl25
          {mso-style-parent:style0;
          mso-number-format:0%;}
     .xl26
          {mso-style-parent:style0;
          mso-number-format:"\#\,\#\#0_\)\;\\$\#\,\#\#0\\$";}
     .xl27
     {mso-style-parent:style0;
     background-color:#666666;
     color:#FFFFFF;
     font-size:9.0pt;
     font-family:Arial, sans-serif;
     mso-font-charset:0;
     text-align:left;
     vertical-align:middle;
     border-top:none;
     border-right:.5 pt solid silver;
     border-bottom:.5pt silver;
     border-left:none;
     mso-pattern:auto none;
     white-space:normal;
     .xl55
     color:black;
     font-size:8.0pt;
     font-weight:700;
     mso-style-parent:style0;
     mso-number-format:"\#\,\#\#0_\)\;\[Red\]\\$\#\,\#\#0\\$";
     mso-pattern:auto none;
     font-size:9.0pt;
     font-family:Arial, sans-serif;
     mso-font-charset:0;
     text-align:right;
     border-top:none;
     border-right:.5pt solid silver;
     border-bottom:.5pt solid silver;
     border-left:none;
     .xlDate{
     mso-style-parent:style0;
     mso-number-format:"yyyy\\-mm\\-dd";
     .xlDateTime{
     mso-style-parent:style0;
     mso-number-format:"yyyy\\-mm\\-dd\\ h\\:mm\\ AM\/PM";
     </xsl:comment>
     </style>
     <xml>
      <x:ExcelWorkbook>
       <x:ExcelWorksheets>
        <x:ExcelWorksheet>
          <x:Name><%=subtab1%></x:Name>
          <x:WorksheetOptions>
           <x:ProtectContents>False</x:ProtectContents>
           <x:ProtectObjects>False</x:ProtectObjects>
           <x:ProtectScenarios>False</x:ProtectScenarios>
          </x:WorksheetOptions>
        </x:ExcelWorksheet>
       </x:ExcelWorksheets>
      </x:ExcelWorkbook>
      </xml>
     </head>
<body text="#000000" style="margin-left:5px;margin-top:5px">
      <table border="0" cellpadding="0" cellspacing="0" width="100%">
          <tr>
              <td>
                   <table border='0' cellpadding="0" cellspacing='0' width="100%">
                         <tr class="xl21">
                              <td align="left" nowrap style='font-size:11px;' colspan="<%=titleSpan%>"><b><%=subtab1%></b> - COB  <%=irHelper.formatDate(strTradeDate)%>  </td>
                              </tr>
                     </table>
               </td>
          </tr>
          <tr>
               <td> </td>
          </tr>

          <tr>
               <td>
                    <%=headerString%>
                    <%=contentString%>
               </td>
          </tr>
<%
               }//end of if
          }//end of while
     }//end of if report_Ids
%>
     </table>
</body>
</html>

XLR b1 2007 and excel 2007 excel sheet is empty

Similar Messages

Maybe you are looking for