XML Based File Senario

I am receiving xml files and I need to configure File adopter to pick these files one by one, I know how to configure File adopter for non xml file.
Would you people like to let me know how could I do the required configuration steps.
Is mapping is required ?
for non XML files we use content conversion and specify the Message type as document name.
we also specify the recordset structure. etc.
in the case we already have xml file how mapping/interface mapping and message mapping will take place.
Thanks in advance

Hi Saqib,
The required steps can be found at:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm --> Runtime --> Connectivity --> Adapters --> File/FTP Adapter.
Most of the time, mapping is needed, but that is up to you.
Please also look at the How-To-Guides for examples:
https://www.sdn.sap.com/irj/sdn/howtoguides
I hope this helps!
John Ta

Similar Messages

Xml based file path problem on Windows

Hi
I'm having a problem with a Flash based slideshow based on
the tutorial one from here
http://www.adobe.com/support/flash/applications/jpeg_slideshow_xml/index.html
I've added a timed nextSlide function but basically left the
actionscript the same apart from that.
The problem is that the file works fine in a html file on any
Mac browser I care to test in, Firfox,Netscape,Safari and even
IE5.2 but when I try it in Windows IE6 or firefox, no picture s or
titles show. I've tried this under parallels from a "shared"
folder, and also on a real pc from the website.
I also tried the original tutorial file and it doesn't seem
to work either.
Can anyone cast any light on this problem?
I thought it was the different way paths are defined on Mac
& Windows ie / vs \ so I put everything at the same level and
redefined the paths in the xml to be at the same level , but still
no go on Windows.
Help! please!

Hello!
Does anyone have any idea what the problem is with this?
The example is from the support section of this site and it
doesn't work. Surely an Adobe support person has a comment.

Unable to validate a java.util.Properties XML based File

I cannot for the life of me figure out what is wrong with this xml file, but it fails the validation of java.util.Properties and as such won't be parsed in. Help!
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE properties SYSTEM "http://java.sun.com/dtd/properties.dtd">
<properties version="1.0">
<entry key="bottleneckServer.address"></entry>
<entry key="bottleneckServer.port">8206</entry>
<entry key="bottleneckServer.confirmDelay">10</entry>
<entry key="bottleneckServer.cleanupDelay">120</entry>
</properties>Thanks in advance!

This xml file works perfectly.
Here is some test code:
        Properties p = new Properties();
        p.loadFromXML(getClass().getClassLoader().getResourceAsStream("someFilePath/someFileName.xml"));
        assert "8206".equals(p.getProperty("bottleneckServer.port")) : "Property 'bottleneckServer.port' != 8206";

Sending XML file from SAP to Windows Based file server with FTP function

Hi Gurus,
We are using SAP BW 3.0B version.
I need to convert data in ODS to XML format and send this XML file to remote server which is not a SAP application server, it is just a Window Based file server with FTP function..
By writing some ABAP code I have converted ODS data into XML format (which gets saved in my local system)
(Is that I need to put this file in Application Server to send it to the other servers? )
Now the thing is how I can send this file to that Windows Based file server.
plz suggest me.... what can be done......
Thanks in Advance
Madhusudhan
Edited by: Madhusudhan Raju on Dec 3, 2009 4:25 AM

I dont think the above code support windows OS. Because I always execute this script via UNIX.
I think you can try this option, go to command prompt, goto the destination path where you have an XML file using cd....
ftp (destination servername), specify the username and password.
afterthat, use the command put and filename.
check whether the file had reached destination successfully or not.
For automation purpose, you can use the following script like
ftp: -s: test.txt (servername)
In test.txt,
UserName
Password
bin
cd /files
put file.xml
bye
Also, you can check in SM69, there will be some SAP external commands to automate the file transfer.
Thanks
Sat
http://support.microsoft.com/?kbid=96269

Tree based on XML DB files

Has someone ever tried to build a tree based on XML DB files?
Regards,
Learco

Hello,
Yeah I've done that before, I basically was getting XML exports and was running them against one of 3 XSLT's , users choice , and one was a tree. I'll dig up the code.
Or are you talking about building a tree based on all the files in XMLDB to navigate around them, I have a start on that I can give you as well, never finished it though.
Regards,
Carl
blog : http://carlback.blogspot.com/
apex examples : http://apex.oracle.com/pls/otn/f?p=11933:5

How to calculate number of data records in a XML output file

Hi,
After generating a XML output file from Oracle Reports, I want to calculate number of records in the XML file. Is it possible? Specifically, I want to calculate number of records for a group variable ( organization_id, which I use for bursting).
Thanks for the help.

Thanks BIPuser. It is useful for me.
I can use this xsl function within the template. However, I'm also looking to print this in the concurrent request log file. So, outside of rtf template, id there any PL/SQL based XML functions I can use to count the number of records.
Thanks.

Using XML-based object structures to represent data in code/at run-time

Hello,
I have quite a "high level" question which has be bothering me for some time, and I haven't found the subject tackled in any books. I believe J2SE/J2EE is not an important divide here.
Lets say I want to develop a J2SE game application with two programs: a "level designer", and a "level viewer", and I want to store the level files in an XML format.
My question, and I use this example only to try and illustrate it, is:
when coding the level designer or viewer, is it reasonable to use an XML-based object hierarchy for representing a level in code/at run-time, i.e. using the standard Java DOM APIs? Or should one (as I would have done before XML came along) develop a set of classes much closer to modelling the real form of a level, and then add a means to convert those objects to/from to XML format?
This second option of course I would use/would have used if I wasn't thinking about XML, but isn't it sometimes easier to just read in an XML file into a DOM representation and just use the data straight out of that structure, rather than go through the bother of parsing the XML into a set of unrelated objects defined by a different family of classes? What shapes your decision here? And if the second option is best, what is the easiest way of converting to/from the XML?
Thank you for any advice.
Greg

Hi Christian,
Can I ask: what about if your domain was quite 'close' to an object/DOM representation of XML?
For instance, what if a game operated by acting out a theatrical script, a spoken conversation, between two characters, perhaps somehow influenced at points by the user, and a particular level was just a different script for the characters.
One could imagine that the object representation of this would in the end be quite similar to how you'd represent XML, i.e. like a tree of nodes, where each node was a line from the script, and some nodes were a decision point where different nodes could be chosen from.
Would you still want to avoid using XML-based classes to represent the underlying 'game', or is there a point where you would 'give it' to the similarity and use existing XML structures directly?
Thank you for any advice
Greg

Merging randomly-named XML data file on client-side with pdf designed in Livecycle 7.0 (and addition

Okay, as a heads up I work for a financial institution and we are converting our legacy "jetforms" to pdf format. I have in my staff for the project, 2 code developers and myself- a form designer. We have currently spent 2 months in trial and error attempting to resolve this problem, please let us know anything you can have. All client-side (internal) machines are running Windows XP and Adobe Reader 7.0.7
The software we use as a financial institution allows our users to export a customer's data file onto their machine which is then renamed to include the member's account number and first and last name for our staff to determine which data file they need more accurately. In legacy jetforms, we have developed a program that pushes the data from the customers file that they select, into the jetform that they want to open and the matching fields in the data file fill in the fields of the jetform. Clean and simple.
Now, i have hit nothing but frustration when attempting to perform the same process with pdfs using a form designed in livecycle designer 7. First, i see no obvious command for opening a pdf and importing a data file using a command line, like pdfmerge or something of the sort in which an xml data file can be specified and a pdf can be specified. I saw something like it using an fdf format and attempted to do this but apparently reader cannot import the data into the pdf that was designed adobe livecycle 7. All i have been seeing is database connections and using javascript inside the form to populate fields based on these database connections, etc. etc. or doing a manual file>import data>etc. which we don't want to have our staff do. We do not have reader extensions enabled, simply because i cannot get an adobe representative to call me and discuss pricing nor see any estimated pricing chart around. I don't know if reader extensions are necessary for this or not but i'm becoming very very frustrated with it.
We don't want a complex server-side data connection binding with dynamic input. No, we just want it where our developers can say "if this data file is selected, and this pdf form is selected run this command" which would be a simple pdfmerge type solution. Is this possible or do i need to stay with jetforms until our software the billion dollar financial institution uses does form building inside its own application? I don't want to fight about who is better, what version to use, etc. I just want the straight up honest truth. If you need to know the pricing that the reader extensions would have to go by, assume there will be 500 client computers that will need to use it.

From your post it sounds like you are Central Pro (a product for which I am by no means an expert), but you say you want to upgrade to a newer product from your "legacy" one. Is there a reason for this? Have your requirements change so that it no longer fits them? Central is still in the current Adobe roster and as far as I know there is no plans to get rid of it any time soon, so if it does everything you want I don't see why you would want to change.
There is no product in the LiveCycle suite that merges xml data into a form from the command line. LiveCycle (with the exception of Designer) is a suite of server products, so the closest you would come is LiveCycle Forms (merge the xml and create a fillable PDF) or LiveCycle Print (merge the xml and print the form).
Hope this helps somewhat.
Chris
Adobe Enterprise Developer Support

Generated XML doc file contains comments from MFC source code

Hello, in my project I use the option /doc to generate XML doc file from my source codes but unfortunately in the output XML file there are mixed also comments from original MFC source codes, see the part of generated xml file:
Is there a solution to ignore these MFC cpp files?
Many thanks
Regards
Petr Stejskal
<?xml version="1.0"?>
<style xmlns="http://www.w3.org/1999/xhtml">@namespace html url(http://www.w3.org/1999/xhtml); :root { font:small Verdana; font-weight: bold; padding: 2em; padding- } * { display: block; padding- } html|style { display: none; } html|span, html|a
{ display: inline; padding: 0; font-weight: normal; text-decoration: none; } html|span.block { display: block; } *[html|hidden], span.block[html|hidden] { display: none; } .expand { display: block; } .expand:before { content: '+'; color: red; } .collapse
{ display: block; } .collapse:before { content: '-'; color: red; } </style><doc><assembly><assembly>
"Console" </assembly></assembly><members><members><member name="T:_RS"><member
name="T:_RS">Reed-Solomon codec control block</member></member><member name="M:MMask_makeMask(System.Int32,System.Byte*,System.Int32,QRecLevel)"><member
name="M:MMask_makeMask(System.Int32,System.Byte*,System.Int32,QRecLevel)">Mode indicator. See Table 2 in Appendix 1 of JIS X0510:2004, pp.107.</member></member><member
name="M:CMFCControlRenderer.IsScaled"><member
name="M:CMFCControlRenderer.IsScaled"><summary><summary>Tells whether this control
renderer works with scaled (resized) images.</summary></summary><returns><returns>Returns TRUE if this control
renderer works with resized (scaled) images.</returns></returns></member></member><member name="M:CMFCControlRenderer.SmoothResize(System.Double)"><member
name="M:CMFCControlRenderer.SmoothResize(System.Double)"><summary><summary>
Smoothly resizes images.</summary></summary><param name="dblScale" /><param
name="dblScale"> Scale ratio.</param><returns><returns>
TRUE if resize succeeds; otherwise FALSE.</returns></returns></member></member><member name="M:CDrawingManager.CreateBitmap_32(HBITMAP__*,System.UInt32!System.Runtime.CompilerServices.IsLong)"><member
name="M:CDrawingManager.CreateBitmap_32(HBITMAP__*,System.UInt32!System.Runtime.CompilerServices.IsLong)"><summary><summary>
Creates a 32 bit bitmap from the specified bitmap.</summary></summary><returns><returns> A handle to created
bitmap, or NULL, if creation fails.</returns></returns><param name="bitmap" /><param
name="bitmap"> A handle to the original bitmap.</param><param name="clrTransparent"
/><param
name="clrTransparent"> An RGB value specifying transparent color of the original bitmap.</param></member></member><member
name="M:CDrawingManager.CreateBitmap_32(CSize!System.Runtime.CompilerServices.IsConst*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Void**)"><member
name="M:CDrawingManager.CreateBitmap_32(CSize!System.Runtime.CompilerServices.IsConst*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Void**)"><summary><summary>
Creates an empty 32 bit bitmap.</summary></summary><returns><returns> A handle to created bitmap, or NULL,
if creation fails.</returns></returns><param name="size" /><param
name="size">Specifies bitmap size.</param><param name="pBits" /><param
name="pBits">When the function returns contains a pointer to bitmap bits.</param></member></member><member
name="M:CDrawingManager.DrawRotated(CRect,CDC*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Int32)"><member
name="M:CDrawingManager.DrawRotated(CRect,CDC*!System.Runtime.CompilerServices.IsImplicitlyDereferenced,System.Int32)"><summary><summary>Rotates
a source DC content inside the given rectangle by +/- 90 degrees</summary></summary><param name="rectDest" /><param
name="rectDest">Destination rectangle</param><param name="dcSrc" /><param
name="dcSrc">The source device content.</param><param name="bClockWise"
/><param
name="bClockWise">TRUE - rotate +90 degrees, FALSE - 90.</param></member></member><member
name="M:AfxRegDeleteKey(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,ATL.CAtlTransactionManager*)"><member
name="M:AfxRegDeleteKey(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,ATL.CAtlTransactionManager*)"><summary><summary>Deletes
the specified registry key.</summary></summary><returns><returns> If the function succeeds, the return
value is ERROR_SUCCESS. If the function fails, the return value is a nonzero error code defined in Winerror.h</returns></returns><param name="hKey" /><param
name="hKey">A handle to an open registry key.</param><param name="lpSubKey"
/><param
name="lpSubKey">The name of the key to be deleted.</param><param name="pTM" /><param
name="pTM">Pointer to CAtlTransactionManager object</param></member></member><member
name="M:AfxRegOpenKeyEx(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,System.UInt32!System.Runtime.CompilerServices.IsLong,System.UInt32!System.Runtime.CompilerServices.IsLong,HKEY__**,ATL.CAtlTransactionManager*)"><member
name="M:AfxRegOpenKeyEx(HKEY__*,System.Char!System.Runtime.CompilerServices.IsConst*,System.UInt32!System.Runtime.CompilerServices.IsLong,System.UInt32!System.Runtime.CompilerServices.IsLong,HKEY__**,ATL.CAtlTransactionManager*)"><summary><summary>Opens
the specified registry key.</summary></summary><returns><returns> If the function succeeds, the return
value is ERROR_SUCCESS. If the function fails, the return value is a nonzero error code defined in Winerror.h</returns></returns><param name="hKey" /><param
name="hKey">A handle to an open registry key.</param><param name="lpSubKey"
/><param
name="lpSubKey">The name of a key that this function opens or creates.</param><param name="ulOptions"
/><param
name="ulOptions">This parameter is reserved and must be zero.</param><param name="samDesired" /><param
name="samDesired">A mask that specifies the desired access rights to the key.</param><param
name="phkResult" /><param
name="phkResult">A pointer to a variable that receives a handle to the openedkey.</param><param
name="pTM" /><param
name="pTM">Pointer to CAtlTransactionManager object</param></member></member></members>

Hi stejsky,
Thank you for posting in MSDN forum.
>>In my project I use the option /doc to generate XML doc file from my source codes but unfortunately in the output XML file there are mixed also comments from original MFC source codes.
Based on your issue, could you please tell me how you use the option /doc to generate XML doc file from your source codes?
If you use the option /doc to generate the XML doc file by right-click the your MFC project->Properties->Configuration Properties->C/C++->Output file->set the Generate XML document files as Yes(/doc) like the following screen shot.
(1)If yes, since we could not reproduce your issue in mu side, so if possible, I suggest you could share me your MFC project so that we will further help you support this issue.
You could upload your MFC project to the OneDrive and then copy link here.
(2)If no, please try the above way to generate XML doc file and then check if you still get same issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

JAXP working with XML-XSL files - urgent help

I have the code below to transform xml file into html file using xsl file:
Transformer transformer = tFactory.newTransformer(new StreamSource("D:/Test/26120108026263560502.xsl"));
transformer.transform(new StreamSource("D:/Test/26120108028469387014574415483532664948806162003.xml"), new StreamResult(new FileOutputStream("D:/Test/Test.html")));
The code works fine with simple xml, xsl files, but it shows strange error messages when transforming more complex xsl file, please look at the errors below:
[Error] 26120108026263560502.xsl:3:80: Element type "xsl:stylesheet" must be declared.
[Error] 26120108026263560502.xsl:4:58: Element type "xsl:output" must be declared.
[Error] 26120108026263560502.xsl:6:75: Element type "xsl:include" must be declared.
[Error] 26120108026263560502.xsl:12:25: Element type "xsl:template" must be declared.
[Error] 26120108026263560502.xsl:14:7: Element type "html" must be declared.
[Error] 26120108026263560502.xsl:15:7: Element type "head" must be declared.
[Error] 26120108026263560502.xsl:16:8: Element type "title" must be declared.
[Error] 26120108026263560502.xsl:17:75: Element type "xsl:value-of" must be declared.
[Error] 26120108026263560502.xsl:19:74: Element type "meta" must be declared.
[Error] 26120108026263560502.xsl:20:8: Element type "style" must be declared.
[Error] 26120108026263560502.xsl:38:25: Element type "body" must be declared.
[Error] 26120108026263560502.xsl:39:48: Element type "xsl:call-template" must be declared.
[Error] 26120108026263560502.xsl:40:55: Element type "xsl:call-template" must be declared.
[Error] 26120108026263560502.xsl:41:49: Element type "xsl:call-template" must be declared.
[Error] 26120108026263560502.xsl:43:67: Element type "table" must be declared.
[Error] 26120108026263560502.xsl:44:7: Element type "tr" must be declared.
[Error] 26120108026263560502.xsl:45:21: Element type "td" must be declared.
[Error] 26120108026263560502.xsl:45:24: Element type "b" must be declared.
[Error] 26120108026263560502.xsl:45:51: Element type "br" must be declared.
[Error] 26120108026263560502.xsl:46:123: Element type "xsl:value-of" must be declared.
It look to me that JAXP can't recognize the tags. Everyone's help is appreciated.
Neil

Here is the top part of it: ***********************
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE xsl:stylesheet [<!ENTITY nbsp " ">]>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="html" indent="no" encoding="UTF-8" />
<xsl:include href="http://connexion.vdr.com/ematrix/reports/xsllib.xsl" />
<xsl:template match="/">
<html>
<head>
<title>
<xsl:value-of select="//businessObject[objectType='CRA']/objectName"/>
</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<style>
TABLE
font-family: Arial Narrow, Tahoma, Verdana;
border: #000000 solid;
border-width: 2px 2px 0px;}
TABLE.BOTTOM
font-family: Arial Narrow, Tahoma, Verdana;
border: #000000 solid;
border-width: 2px 2px 2px;}
TD.DATA, TH.DATA
border: #cccccc solid;
border-width: 0px 1px 1px 0px;}
</style>
</head>
<body bgcolor="#FFFFFF">
<xsl:call-template name="ECRHeaderTable" />
<xsl:call-template name="ECRHeaderDetailsTable" />
<xsl:call-template name="ECRDetailsTable" />
Anh here is the top part of file xsllib.xsl in the xsl:include: ********
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE xsl:stylesheet [<!ENTITY nbsp " ">]>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">

<xsl:template name="CalJulian">
<xsl:param name="Year"/>
<xsl:param name="Month" select="1"/>
<xsl:param name="Day" select="1"/>
<xsl:param name="Hour" select="0"/>
<xsl:param name="Min" select="0"/>
<xsl:param name="Sec" select="0"/>
<xsl:variable name="jy">
<xsl:choose>
<xsl:when test="($Year < 0) and ($Month > 2)">
<xsl:value-of select="$Year + 1"/>
</xsl:when>
<xsl:when test="($Year >= 0) and ($Month <= 2)">
<xsl:value-of select="$Year - 1"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$Year"/>
</xsl:otherwise>
</xsl:choose>
</xsl:variable>
The files work fine when I use msxsl.exe without any errors. I forgot to mention that dispite all the errors, JAXP still creates the html file but seeing the errors is not a good thing.
Neil

How to use/access XML based DVMs in ODI 11.1.1.5.0

Hi All,
I want to use XML based DVMs in interface on ODI 11.1.1.5.0.
I have tried something like this. However while "Load Data" step, i am facing the error "
-4850 : 3F000 : java.sql.SQLException: invalid schema name: CURRENCYCODE
java.sql.SQLException: invalid schema name: CURRENCYCODE
at org.hsqldb.jdbc.Util.sqlException(Unknown Source)
at org.hsqldb.jdbc.JDBCPreparedStatement.<init>(Unknown Source)
at org.hsqldb.jdbc.JDBCConnection.prepareStatement(Unknown Source)
at com.sunopsis.jdbc.driver.xml.SnpsXmlConnection.prepareStatement(SnpsXmlConnection.java:1192)
at sun.reflect.GeneratedMethodAccessor314.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
at $Proxy138.prepareStatement(Unknown Source)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:83)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:111)
at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:76)
at oracle.odi.runtime.agent.execution.sql.SQLDataProvider.readData(SQLDataProvider.java:1)
at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:67)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1595)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:580)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:513)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$StartScenTask.doExecute(StartScenRequestProcessor.java:1070)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Caused by: org.hsqldb.HsqlException: invalid schema name: CURRENCYCODE
at org.hsqldb.error.Error.error(Unknown Source)
at org.hsqldb.SchemaManager.getSchemaHsqlName(Unknown Source)
at org.hsqldb.SchemaManager.getSchemaName(Unknown Source)
at org.hsqldb.Session.getSchemaName(Unknown Source)
at org.hsqldb.SchemaManager.getTable(Unknown Source)
at org.hsqldb.ParserDQL.readTableName(Unknown Source)
at org.hsqldb.ParserDQL.readTableOrSubquery(Unknown Source)
at org.hsqldb.ParserDQL.XreadTableReference(Unknown Source)
at org.hsqldb.ParserDQL.XreadFromClause(Unknown Source)
at org.hsqldb.ParserDQL.XreadTableExpression(Unknown Source)
at org.hsqldb.ParserDQL.XreadQuerySpecification(Unknown Source)
at org.hsqldb.ParserDQL.XreadSimpleTable(Unknown Source)
at org.hsqldb.ParserDQL.XreadQueryPrimary(Unknown Source)
at org.hsqldb.ParserDQL.XreadQueryTerm(Unknown Source)
at org.hsqldb.ParserDQL.XreadQueryExpressionBody(Unknown Source)
at org.hsqldb.ParserDQL.XreadQueryExpression(Unknown Source)
at org.hsqldb.ParserDQL.compileCursorSpecification(Unknown Source)
at org.hsqldb.ParserCommand.compilePart(Unknown Source)
at org.hsqldb.ParserCommand.compileStatement(Unknown Source)
at org.hsqldb.Session.compileStatement(Unknown Source)
at org.hsqldb.StatementManager.compile(Unknown Source)
at org.hsqldb.Session.execute(Unknown Source)
... 27 more"
Steps followed:
1. Created data server with below values.
JDBS Driver : com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
JDBC URL : jdbc:snps:xml?f=/appl/oracle/dev/fmw/11g/product/Oracle_ODI1/oracledi/xml_odi/CURRENCY95CODE.xml&s=CURRENCYCODE&case_sens=true
2. Created a physical schemas out of it and passed SCHEMA as "CURRENCYCODE". Please note that it dint showup automatically. I had to type the schema name "CURRENCYCODE".
3. Implemented logic in interface and facing the above error when tried executing interface at "Load Data" step.
Note : Test Connection is working fine. And i have all the permissions to execute.
Kindly suggest the right way if i am doing something wrong.

Hello,
Your filemaker install should have come with a jdbc driver (.jar file). You'll need to check your filemaker pro documentation to confirm. Once you have the file, place it in the ODI/oracledi/agent/drivers folder where your agent lives (also place it on your client if you want to use the local agent for testing). You can then create a custom Technology in the Topology tab in ODI.
There are many options in the Technology definition which you will need to figure out based on what filemaker pro can handle and how it processes queries. Once the technology is created, add a Data Server and Physical Schema as you would any other technology. Then, build the model, datastores, interfaces, etc. just like any other tech.
Hope this gets you started.
Thank you,
Michael R.

Creating xml format file with double dagger ‡ as delimiter

Hi,
My source files are delimited with double dagger (‡) and I am using openrowset to load the files to SQL Server. When I am creating the format file by specifying the delimiter as ‡, the format file created has a different delimiter than the specified one.
The new delimiter appearing in xml format file is ç.
Any help?
TIA
Nitesh Rai- Please mark the post as answered if it answers your question

How did you create format file?
Try this method and see if it works
http://visakhm.blogspot.com/2013/10/generate-format-files-based-on-table.html
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

[ADF-11.1.2] Dynamic EO/VO/Association/View Link/pagedef/JSPX XML Def files

I though I found gold but it has nothing when I clicked on it.
Steve Muench's "Not Yet Documented Examples" [http://blogs.oracle.com/smuenchadf/resource/examples] > "Using ViewObject writeXML and JSTL XML Tag Library" suppose to provide the example. but I am getting File not found error. Seems the sample application doesn't exists any more.
Please point me to correct example for my following use case:
At Run-time:
1. My Application will ask user for database table name.
2. for provided database table name, my application should Generate XML Definition file for EO, Associations, VO and View Links inside Model Project (basically all definition file should be created which gets created when developer create these Business Components for database table through JDeveloper Studio).
3. Once done, application should also generate JSPX file using ADF page template in ViewController Project, with binding definition to it's corresponding newly generated VO Objects from step 2.
4. The page will be then, visible to user to use it (create/update/delete records)
First of all, is it possible to achieve above requirement ? Based on description of Steve Muench's "Using ViewObject writeXML and JSTL XML Tag Library", I think it is possible, but I don't have the sample application to refer.
I could have used dynamic view object concept to display the records with basic page layout. But I want users the ability to modify the create/records/delete the records with following requirements:
1. If require, Business Logic Developer can use Jdeveloper Studio to access new generated Business Components and modify it (like adding some validation rules)
2. If require, UI Developer can access newly generated JSPX file and change the layout.
Please let me know how much and how can I achieve it ?

Shay,
Thank you for your reply. I will take a look at your links.
Use Case:
Application will have different BC for different IT Assets (like Monitor, Keyboard, Servers etc), which will basically hold records for all available Assets (like Display Resolution, screen size etc for all monitor in Monitor BC).
I want to give user; the ability to create, for e.g., the sub-class of Monitor to store more specific attribute-values in different table (which will be linked Parent BC). For e.g.: They may want to care about holding CRT and LCD Monitor records in separate new database table -- Application will ask user what all attributes/Columns they want to see for LCD which is specific to this type AND which is not present in already existing out-of-box Monitor BC/Table - e.g. - "Viewing Angle" Attribute).
With that said, I can write code to create database table on fly (having 1-to-1 foreign key reference to parent table) but writing ADF part seems difficult. I also wanted application to automatically generate new page for newly added VO BC. E.g.: LCD-Monitor.JSPX inheriting all attributes from monitor (parent VO) in the same structure as Monitor.JSPX file is having with extra LCD-specific Attributes in separate panel tab (which again UI developers can customized it).
Too much to expect huh !
I am going to start building the application so If not above way, any other suggestion to achieve the requirement ?
Edited by: Anandsagar Sah on Aug 29, 2011 9:23 PM

Best way to transfer XML based data

All,
I am looking for the best possible way of transferring XML based data from a server to a web based client.
XML file is generated on server and its size is massive. I am looking for all possible alternatives and possibly the best way.
Could it be AJAX, SOAP, parsing through a servlet, creating value objects?
I appreciate all inputs.
Thanks,
S.

You can make a bootable copy of your system now, but you won't be able to boot from it with the new computer. They are not usually backwards compatible with the OS. But when you first boot into the new system, use SetUp Assistant to migrate the data from the cloned copy. That will work just fine.

Reading XML based on DTD

HI All
i need a solution.
if we have a dtd file and a xml file and read the file using SAX i am able to read it where i use the startElement() and endElement() and in these i will use a hardcoded my tag names so that upon reaching this tag name i do something or print.
THis is fine.
But what if i have different DTDs and their corresponding XMLs
Can i read an XML by parsing first a DTD,getting the elements from the DTD and use those element names in the XML parsing by SAX.
That is i need a generic program where given a DTD and XML, i can parse the XML based on DTD
Is this possiblew with SAX or any other parser.
if so how.
i found that if i read 10 XML files from a parser. i can do that only if all are of the same DTD type.
but can i have 10 XML with each one with different DTD and even then use a single program to read all the files
Please help me
Thanks
Vijay Sunder

Normally, XML is done for writing XML instances, respecting a specific DTD or SCHEMA.
In the XML content you can set the DTD for the instance. So, instances can have reference to a DTD, not necessarily the same, of sure.
In that case, the PARSER is responsible for validating the instance against the defined DTD. Simply, be careful to locate the right DTD for each instance.
There is a very good tutorial, and short, here [http://java.sun.com/j2ee/1.4/docs/tutorial/doc/] and go to "Chapter 2: Understanding XML". You will learn how to parse a XML document, how to validate its content...
Naturally, a Java program can read multiple XML documents, extract valuable data for your stuff. For example transform a echo.java source explained in the tutorial, for handling multiple input document which is your need, and you will experience that this code can parse different documents having different DTD references.

XML Based File Senario

Similar Messages

Maybe you are looking for