Xml file, non database field etc..

Hi,
There is a requirement for putting a non database field in an
infobus grid control and populating it with some value at the
runtime. As this is not directly available in gridcontrol, many
have tried using a join query as I could see from the
postings.(Like select deptcode,desc from emp, dept where
emp.deptcode = dept.deptcode). This works well when the data is
queried from the database. But when a new deptcode is entered, it
is not possible to get the corrosponding value from the database
and show it on this field, as u get readonly attribute error.
Even if u explicitly change the attribute to updateable the error
will remain as such.
The cause of this problem, I have tracked down to the xml file.
The entity for the updateable table (in this case EMP) does not
have the attribute for deptdesc. If this is manually added, it is
possible to add values to the deptdesc column. The catch is when
inserting a row to the database. All the attributes in the
entity
will appear in the insert statement and u end up with an invalid
column name error for the deptdesc column.
Seeing this consistant behaviour, I assume that the insert
statement is created by parsing the xml file. Had there been an
attribute value in the xml file for insert into database (just
like IsNotNull etc.. perhaps IsUpdateable which can be set
manually), while parsing this attribute can be removed.
To do this I would like to know where this xml parser is
implemented in jdev. Is it possible for me to change its
behaviour or can I expect to get a patch for this? This
functionaliy is very much essential for me, as I am in the middle
of a very large project using jdev2.0. I don't mind implementing
it, if the source is available.
Any helpful suggestions, comments are welcome. Sorry for the long
post and thanks
--Gopal
null

I don't think it will work with a non-db-item. But you could create a separate block based on your image_tb-table, use read_image_file on the then db-based-column and then simpy issue a commit_form.

Similar Messages

I want to store an xml file into database, and transport it to the XI.

tell me in how many ways we can store a xml file in database.
one i know is.- create a table with field same as that of XML. store XML file data in it
and at the time of transfering data to XI fatch data from table and create an XML file and transfer...
tell me if u know some more

Dear Swethi,
You can move images to SAP using SE78. then u can use them where ever u you require them.
SE78->GRAPHICS->BMAP here give ur image name and click on save
Rgds,
Kiran
Edited by: Kiran on Jun 11, 2009 7:15 AM

Using XML file as Database

Hi all,
Can we use an XML file as Database? Currently I'm using Microsoft Sql Server 2000 as the beckend. Now I'm creating a small project which does not require much functionality of Sql Server. I want it to run without help of any others software installation.
I need only insertion and extraction in a simple manner i.e. no much joins or unions and other implications.
Thanks

jwenting wrote:
sure, just define the format, write the engine, write the drivers, etc. etc.
Far easier to use some lightweight embedded database engine though (but maybe not as much fun).Thanks for reply.
Pls post link to the page or resource where I can read about that.
Also, if you have link to the critical comments on this technique, pls post them also.
Regards
Aakash Agarwal

How to display records from a query into non-database field

Hi
I a have a problem:
I have a query with many tables and 6 column(select a,b,c,d,e,f from x,y,z,t,s,g where conditions) and I use 3 parameters.
I create 3 parameters :datai,:dataf and :partener and a button with a trigger when button is pressed.
Then a create a manualy block with six field non-database a1,b1,c1,d1,e1,f1.
Now I want to display all the records from my query into a1,b1,c1,d1,e1,f1 where a1=a,b1=b,etc. and all the records (if I have 20 record, it will display 20 records in non-database field) when I press the button.
How I made:
I create a cursor with query then
begin open cursor
loop
fetch cursor into :a1,:b1,:c1,:d1,:e1,:f1;
end loop;
close cursor;
end;
It display one record in a1,b1,c1 only and it have to display 100 records and are date for all the fields.
Can somebody help me in this problem?
Thanks.
Edited by: 928437 on Oct 1, 2012 2:55 AM

Creating a view, and querying that into a database block is an excellent solution.
To use the non-database block:
You're missing the all-important Next_Record; command.
<pre> Begin
Go_block('X'); -- block X is the non-database block
Clear_Block(No_Validate);
open cursor X1;
loop
If :System.Record_status != 'NEW' then
Next_Record;
End if;
fetch X1 into :a1,:b1,:c1,:d1,:e1,:f1;
Exit when X1%NOTFOUND;
end loop;
close X1;
end;</pre>

Error while retreiving xml file from database

Hi-
I am trying to configure Planning and getting the following error message at instance configuration step:
"Error while retreiving xml file from database"
We looked at PlanningSystemDB.properties, changes server name to its ip, reinstalled planning, made sure both auth methods are selected (sql server and windows), created new relational repository.. still the same error.
Here is the contents of the configtool error file:
(Dec 11, 2008, 04:36:44 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:37:09 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:38:41 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:07 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:12 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:22 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:40:46 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:41:05 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:48:28 PM), com.hyperion.cis.DBConfigurator, ERROR, Invalid SQL statement: begin transaction IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PROPERTIES]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PROPERTIES IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APP_CLUSTER_DTL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APP_CLUSTER_DTL IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APPLICATION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APPLICATION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_DATASOURCE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_DATASOURCE IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_CLUSTER]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_CLUSTER IF EXISTS (select * from sysobjects where id = object_id(N'[HSP_ACTION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSP_ACTION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PI_INFO]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PI_INFO commit begin transaction CREATE TABLE HSP_ACTION ( ID INTEGER NOT NULL IDENTITY, CONSTRAINT PK_HSP_ACTION PRIMARY KEY(ID) , FROM_ID INTEGER, TO_ID INTEGER, ACTION_ID INTEGER, OBJECT_TYPE INTEGER, PRIMARY_KEY VARCHAR(255), ACTION_TIME DATETIME ); CREATE TABLE HSPSYS_CLUSTER ( CLUSTER_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), CONSTRAINT PK_HSPCLUSTER PRIMARY KEY(CLUSTER_ID) ); CREATE TABLE HSPSYS_DATASOURCE ( DATASOURCE_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), APP_ID INTEGER, RDB_SERVER_URL VARCHAR(255), RDB_TYPE VARCHAR(255) NOT NULL, RDB_CATALOG_NAME VARCHAR(255) NOT NULL, RDB_USER VARCHAR(255) NOT NULL, RDB_PASSWORD VARCHAR(255), RDB_DRIVER VARCHAR(255) NOT NULL, ESS_SERVER VARCHAR(255) NOT NULL, ESS_USER VARCHAR(255) NOT NULL, ESS_PASSWORD VARCHAR(255), CONSTRAINT PK_HSPDTASRC PRIMARY KEY(DATASOURCE_ID) ); CREATE TABLE HSPSYS_APPLICATION ( APP_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), DATASOURCE_ID INTEGER NOT NULL, CONSTRAINT FK_HSPAPP_DSID FOREIGN KEY(DATASOURCE_ID) REFERENCES HSPSYS_DATASOURCE, VERSION VARCHAR(255) NOT NULL, CONSTRAINT PK_HSPAPP PRIMARY KEY(APP_ID) ); CREATE TABLE HSPSYS_APP_CLUSTER_DTL ( APP_ID INTEGER NOT NULL , CONSTRAINT FK_HSP_APP_ID FOREIGN KEY (APP_ID) REFERENCES HSPSYS_APPLICATION , CLUSTER_ID INTEGER NOT NULL, CONSTRAINT FK_HSPCS_CLID FOREIGN KEY(CLUSTER_ID) REFERENCES HSPSYS_CLUSTER, CONSTRAINT PK_APP_CLSTR_DTL PRIMARY KEY(CLUSTER_ID, APP_ID) ); CREATE TABLE HSPSYS_PROPERTIES ( PROPERTY_ID INTEGER NOT NULL, OBJECT_ID INTEGER NOT NULL, PROPERTY_NAME VARCHAR(255) NOT NULL, PROPERTY_VALUE VARCHAR(255), CONSTRAINT PK_HSPPROP PRIMARY KEY(PROPERTY_ID, OBJECT_ID, PROPERTY_NAME) ); CREATE TABLE HSPSYS_PI_INFO ( XML_FILE NTEXT NOT NULL ); commit
(Dec 11, 2008, 04:50:32 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
Thanks for any help.

After spending 2+ hrs with Hyperion Support nothing got resolved.. Just to give more background on this problem, we originally reconfigured all Hyperion components to use different SQL server, that is when the problem started happening as soon as we got to Planning Instance Configuration. Could this be the situations when old server name is still somewhere in the system?.. Could this be Shared Services problem.
Here is another quote from SharedServices_Security.log
2008-12-12 15:08:48,249 [http-58080-Processor1] WARN com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in. Please check the argument.
2008-12-12 15:31:18,121 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 1016
2008-12-12 15:31:30,823 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:31:41,229 [http-58080-Processor4] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:31:41,229 [http-58080-Processor4] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:38:01,938 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 813
2008-12-12 15:38:35,453 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:42:09,776 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:42:09,776 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.

"Error retrieving xml file from database"

Hello All,
I have installed and configured planning with Shared services. While I try to create an instance in Configuration Utility by entering the Instance Name, Host Name, Port (8300) and Click "Next", I get this error -
*"System failure:Error retrieving xml file from database".*
My RDBMS is - SQL Server 2005
OS - Windows 2003 Server
I am unable to work on planning for few months due to this error.. I would sincerely appreciate if someone can provide me a solution for this..
Thanks much,
Varma.

Hi,
Ive seen this before.
If this is a new environment could you create a blank database and configure it as your System database? Then try again and you should be fine.
I think you may have some invalid entries in your sys database.
Seb
www.taysols.com.au

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"

Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar
Edited by: user10385300 on Dec 4, 2008 5:44 AM

This has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
Cheers
John
http://john-goodwin.blogspot.com/

System Failure:-Error while retreiving xml file from database

I install Planning 9.3.1 at Windows2003 server SP1 and MS SQL 2000 SP3A. In Hyperion Planning Instance Registration I take "System Failure:-Error while retreiving xml file from database" error in Configuration .
Please help
Thanks

I also have the same error. Win2000 Server and MS SQL 2005.
Maybe someone made request for official information from Oracle about this issue?
I'd like to change MS SQL to Oracle 10g, I hope this can helps (if reason in RDBMS). But if reason in logic of scripts... I dont't know...

Problems with query on a non-database field

Hi,
Hopefully I am in the correct section...
I have some problems. I wanna query a non-database field but it does not work for one of them. I have tried the following...
declare
vsNewDefaultWhere varchar2(4000);
vbFirstWhere boolean;
cursor curArea is
select a1_area, a1_hbno, a1_seqno
from b1_in, c1_hdr, a1_bl
where b1_sequenceno = a1_seqno
and b1_shipid = a1_hbno
and b1_id = :c1_shipid;
rowArea curArea%ROWTYPE;
procedure mergeStrings (sNewWhereClause varchar2) is
begin
if not vbFirstWhere then
vsNewDefaultWhere := vsNewDefaultWhere || ' and ';
end if;
vsNewDefaultWhere := vsNewDefaultWhere || sNewWhereClause;
vbFirstWhere := false;
end mergeStrings;
begin
navigate.resetselrows('IMP_HDR');
navigate.resetselrows('IMP_DTL');
if not navigate.customwhereclause then
navigate.resetwhereclause('IMP_HDR');
end if;
vsNewDefaultWhere := Get_Block_Property('IMP_HDR', DEFAULT_WHERE);
vbFirstWhere := vsNewDefaultWhere is null;
---- does work!
if :IMP_HDR.c1_usecode is not null then
mergeStrings('c1_shipid in (select b1_id from b1_in where b1_fac = ''' || :global.fac || ''' and b1_comp = ''' || :global.comp || ''' and b1_code like ''' || :c1_usecode || ''')');
end if;
---- does not work!
open curArea;
fetch curArea into rowArea;
if curArea%found then
if :IMP_HDR.c1_area is not null then
mergeStrings('c1_shipid in (select b1_id from b1_in, c1_hdr, a1_bl where b1_fac = ''' || :global.fac || ''' and b1_comp = ''' || :global.comp || ''' and b1_sequenceno = ''' || rowArea.a1_seqno || ''' and b1_shipid = ''' || rowArea.a1_hbno || ''' and rowArea.a1_area like ''' || :c1_area || ''')');
end if;
end if;
end;
Thanks for your help in advance and let me know if you Need more Information.

Hello,
Ask Personalization questions in the dedicated E-Business Suite forum ;-)
Francois

How do I get a value from a portal form for a non database field ? HELP!!

I have a form based off of a table that I added a field to. The form is to allow the user to change abbreviation for a
department field ie. BIO to BIOL. for a biology department. I have a pl/sql procedure for validation using the custom option
on the update button to verify the user and update the data. I have tested to code at the sql prompt and it works.
They only difference between the prompt and the form is the non-database field new_dept_abbr was added to the
form. I don't know how to capture the value of the user input into a variable that can be used in the pl/sql.
Any help would be appreciated.
I have tried this approach
v_new_dept_abbr := p_session.get_value_as_varchar2(
p_block_name => 'default',
p_attribute_name => 'new_dept_abbr'
have tried using p_attribute_name as 'a_new_dept_abbr' but this does work and does not exist in the body of the form.
Have also tried setting the p_block_name to _session - still doesn't work.
Any ideas??
Thanks
Debbie Brennan

Thanks for the info. I tried that and it still doesn't pull the value. I have opened a TAR via metalink, but I'm not getting any
satisfactory answers. I ran across an note - 137172.1 that has this snippet of information in it.
Unfortunately, at this time (portal 3.0.7.6.2) , a non-table item cannot be
referenced in a plsql event handler, only in client side JavaScript code. This
is a known limitation and will be fixed in a future release.
I don't know how to get the value from the client side JavaScript code to a pl/sql variable. Do you?
I've been trying to get them to tell me if the 'known issue' has been addressed in 3.0.9.
I'll keep at it. Thanks so much for your suggestion I appreciate it.
Deb

Insert Image to table from a Non Database Field

Hallo,
db- 9i EE R2
forms - 6i R2
OS - W2003
I have a requirement to upload Images to the database from forms.
I planned to keep the transaction data and the Images separately in different tables with a reference.
So, I created the Image field (BLOB) with a Non Database Field in the Form and use a button to upload the Image. (using READ_IMAGE_FILE).
I tried to insert the Image to the Actual Image table in PRE-INSERT Trigger at block level.
But I was not able to Insert the using reference method. (Cannot compile the PRE-INSERT)
INSERT INTO IMAGE_TB (ID,IMAGE)
VALUES (IMAGE_SEQ.NEXTVAL, :ITINERARY_MAP.IMAGE);
So, Please help me to insert a image to different table from a Non Database Field?
Thanks

I don't think it will work with a non-db-item. But you could create a separate block based on your image_tb-table, use read_image_file on the then db-based-column and then simpy issue a commit_form.

Passing url parameter values to a non database field

Hi,
How do I pass values from the url to a non database field ?
The following works for a database field:
http://host:7777/pls/portal/PORTAL.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=1892460035&p_arg_names=_show_header&p_arg_values=YES&p_arg_names=deptno&p_arg_values=20
but if I use the same for a non database field item20 it doesn't do anything.
http://host:7777/pls/portal/PORTAL.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=1892460035&p_arg_names=_show_header&p_arg_values=YES&p_arg_names=item20&p_arg_values=2003
Thanks,
Sonal.

Hi,
Are you trying to query on this field? It wont work because only database fields can be queried on.
Thanks,
Sharmila

Creating a non database field

Hi.,
i am using jdev 11.1.5
i need to insert a non database field in jspx page
i had created a table finperiod
i need to insert a four nondatabse fields named as rec,dist,supl,cust.
How can i acheive this?

i need to acheive this querry in adf
     select count(*) into var_count
     from appl_journals
     where aj_bu=:global.bu and
     aj_year=:FIN_PERIODS.fp_year and
     AJ_PLANT =:FIN_PERIODS.FP_PLNT AND
aj_period=:FIN_PERIODS.fp_period and
     aj_appl=:AJ_APPL and
     aj_status='N' ;
     if var_count<>0 and :AJ_APPL is not null then
          :APPLICATIONS.appl_exist:='Yes';
     elsif :AJ_APPL is not null then
          :APPLICATIONS.appl_exist:='No';
     end if;
how can i perform this

Update of non-database fields mapped to database fields

I have two columns start month and start year which
are non-database columns and which map to one database
field start date in the database.
I have a post-query trigger on the start month and
start year fields to derive the value from the
database field start date when the form is queried.
When I try to update the form, the update does not
work - if I remove the post-query trigger then the
update works but, the month and year non-database
fields do not get queried.
Any help will be greatly appreciated.
Thanks,
Suzanne

since those 2 fields are not connected to the database field you need to code the update to the database.
Use the pre-insert trigger and set the value of the date item according to the values of the 2 fields.

Xml file, non database field etc..

Similar Messages

Maybe you are looking for