XML in InDesign CS2 and Visual Studio 2005

Hello!
A year ago I made a plug in to InDesign CS1 with the purpose of importing an XML file and create a lay outed table of its contents. The reason I choose to make a plug in was because I didn't find InDesign very dynamic in its XML support.
Now I'm being asked to do a similar but more complex solution for InDesign CS2, which I never used before, and I understand a lot has happened since CS1.
How is the XML support in CS2 now a days?
And by the way, is there any problems with Visual Studio 2005 and the InDesign SDK that you know of?
Best Regards
Kristoffer

I'm sorry, I posted this thread in the wrong area. I will repost in the InDesign SDK area. My bad.
Best Regards
Kristoffer

Similar Messages

Oracle 10g express, Windows Vista and Visual Studio 2005

Hello,
I have Oracel 10g express and Visual Studio 2005 professional, all installed on Windows Vista and working fine.
I want to use the .net tools but I have had problems to install the wright version for this environment. Has anybody have this same configuration working? What are the downloads I need to have and the steps to have the .net oracle tools working ?

It can be done:
1) Download and install XE. Don't download the special "ODT for XE"
2) Download and install ODAC 11g with ODT into a different directory than XE
3) Copy over the TNSNAMES.ORA from the XE install into the new Oracle home.

Change database name - Crystal10 and Visual Studio 2005

Hi there,

I have about 150 crystal reports in my development environment. I need to move them into the testing environment. Every environment has its own database and every database is names '[client name]_[environment]' so I get things like client1_dev, client1_test, client1_prod, etc. The reports are very, very unhappy when moving from dev to test. I have googled this a fair bit and have attempted the stuff on:

http://www.codeproject.com/KB/aspnet/crystalwithaspdotnet.aspx
 
http://www.tek-tips.com/faqs.cfm?fid=5374
 

and a few others and have gotten no where. I spent a couple of days working on this and am now over budget and late. I need a fix and fast.


I have two ideas I have been working on and both have failed out right. 
Idea 1 - during run time: 
- loop through everything thing in sight and set the database information on it 
- that one looks like: 
 
<pre>
using CrystalDecisions.Shared;
using CDCRE = CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Web;
public abstract class ReportBase : Page
 ...snip....
 protected virtual void DoLoad(CrystalReportViewer ReportViewer)
 ReportDocument reportDocument = new ReportDocument();
 SetReportInfo(reportDocument);
 SetParameters(reportDocument);
 DumpParameters(reportDocument);
 protected virtual void SetReportInfo(ReportDocument reportDocument) 
 db_Reports.Reports reportInfo = new ReportsClass();
 CriteriaID = reportInfo.InsertCriteria(CommonUtils.GetLanguagePrefix(), CurrentForm["criteria"].Trim() +
CurrentForm["extracriteria"].Trim(), CSecuritySession.UserSessionInfo.iUserId, string.Empty, CurrentForm["param1"]);
 ADODB._Recordset rs = reportInfo.GetReportInfo(CommonUtils.GetLanguagePrefix(), ModuleName, ReportID, CSecuritySession.UserSessionInfo.iUserId);
 // report to load
 HttpContext.Current.Trace.Warn("Loading the report", rs.Fields["vReportName"].Value as string);
 reportDocument.Load(rs.Fields["vReportName"].Value as string);
 // connection info
 reportDocument.DataSourceConnections[0].SetConnection(rs.Fields["vSQLServer"].Value as string, rs.Fields["vDatabase"].Value as string, false);
 HttpContext.Current.Trace.Warn("Setting connection information",
 string.Format("Server Name:[{0}] Database Name:[{1}]", reportDocument.DataSourceConnections[0].ServerName, reportDocument.DataSourceConnections[0].DatabaseName));
 // logon info
 reportDocument.DataSourceConnections[0].SetLogon(rs.Fields["vUsername"].Value as string, rs.Fields["vPassword"].Value as string);
 HttpContext.Current.Trace.Warn("Setting Logon Information",
 string.Format("Username: [{0}] Password: [{1}]", reportDocument.DataSourceConnections[0].UserID, reportDocument.DataSourceConnections[0].Password));
 DumpConnInfo(reportDocument);
 DumpSubReportConnInfo(reportDocument);
 // reportname / page title
 ReportName = rs.Fields["vDescription"].Value as string;
 private void DumpSubReportConnInfo(ReportDocument reportDocument)
 foreach (Section sec in reportDocument.ReportDefinition.Sections)
 foreach (ReportObject ro in sec.ReportObjects)
 if (ro is SubreportObject)
 SubreportObject sro = (ro as SubreportObject);
 DumpConnInfo(sro.OpenSubreport(sro.SubreportName));
 protected virtual void DumpConnInfo(ReportDocument reportDocument)
 foreach(CDCRE.Table table in reportDocument.Database.Tables)
 Trace.Warn(string.Format("Connection info[{0}]", table.Name),
 string.Format("database: {0} Server: {1} User ID: {2} Pwd: {3}",
 table.LogOnInfo.ConnectionInfo.DatabaseName,
 table.LogOnInfo.ConnectionInfo.ServerName,
 table.LogOnInfo.ConnectionInfo.UserID,
 table.LogOnInfo.ConnectionInfo.Password));
 foreach(NameValuePair2 nvp in table.LogOnInfo.ConnectionInfo.Attributes.Collection)
 Trace.Warn("connection attributes", string.Format("{0} = {1}", nvp.Name, nvp.Value));
 if (string.Compare(nvp.Name as string, "QE_LogonProperties", true) == 0)
 DbConnectionAttributes dca = nvp.Value as DbConnectionAttributes;
 Trace.Warn("connection attributes - QE_LogonProperties", "processing the 'QE_LogonProperties'. Is null [" + (null == dca).ToString() + "]" );
 foreach (NameValuePair2 nvp1 in dca.Collection)
 Trace.Warn("connection attributes - QE_LogonProperties", string.Format("{0} = {1}", nvp1.Name, nvp1.Value));
 Trace.Warn("----------------------");
 protected virtual void DumpParameters(ReportDocument reportDocument)
 HttpContext.Current.Trace.Write("--------------------------");
 HttpContext.Current.Trace.Write(" Dumping Parameters ");
 HttpContext.Current.Trace.Write("--------------------------");
 for (int i = 0; i < reportDocument.ParameterFields.Count; i++)
 if (string.IsNullOrEmpty(reportDocument.ParameterFields.ReportName))
 HttpContext.Current.Trace.Write(string.Format("[{0}] {1}", i, reportDocument.ParameterFields.Name), GetParamValue(reportDocument.ParameterFields));
 else
 HttpContext.Current.Trace.Warn(string.Format("SubReport Parameter [{0}] {1}", i, reportDocument.ParameterFields.Name), GetParamValue(reportDocument.ParameterFields));
 HttpContext.Current.Trace.Write("--------------------------");
</pre>
 
- this one always errors out with a can't find database type connection and spits out the old database message. 
- as you can see there is a stack of tracing in there. all of the trace messages make it look like it is hitting the right database. I have no clue why this isn't working. 
 
Idea 2 - fix up reports before moving to the other environments: 
- I figured I would write a little app that would crawl through the directories of reports and fix them up 
- I read a few examples of this online and none of them seem to work with Crystal 10. They work with some of our legacy Crystal 8 reports (I have been testing this all over the place) but not with 10. 
- the last function is the interesting one. 
- that one looks like: 
<pre>
using System;
using System.Collections;
using System.Collections.Generic;
using System.Text;
using System.IO;
using System.Reflection;
using System.Diagnostics;
namespace crystal_10_switch
 public class Changer
 protected CRAXDDRT.Application app;
 protected object missing = Missing.Value;
 protected string currentFolder = string.Empty;
 protected string OdbcName;
 protected string DBName;
 protected ICollection Folders;
 public Changer(string OdbcName, string DBName, ICollection Folders)
 this.OdbcName = OdbcName;
 this.DBName = DBName;
 this.Folders = Folders;
 app = new CRAXDDRT.Application();
 string junk = Console.ReadLine();
 public virtual void Switch()
 foreach (string dir in Folders)
 SwitchDir(dir);
 protected virtual void SwitchDir(string dir)
 DirectoryInfo di = new DirectoryInfo(dir);
 FileInfo[] files = di.GetFiles("*.rpt", SearchOption.AllDirectories);
 currentFolder = di.FullName;
 foreach (FileInfo file in files)
 Trace.WriteLine("Processing the report: " + file.FullName);
 Trace.Indent();
 SwitchFile(file);
 Trace.Unindent();
 protected virtual void SwitchFile(FileInfo file)
 CRAXDDRT.Report rpt = app.OpenReport(file.FullName, missing);
 SwitchTable(rpt);
 SwitchSubreports(rpt);
 SaveReport(rpt, file);
 protected virtual void SwitchSubreports(CRAXDDRT.Report rpt)
 Trace.Indent();
 foreach (CRAXDDRT.Section section in rpt.Sections)
 foreach (CRAXDDRT.IReportObject robj in section.ReportObjects)
 if (robj is CRAXDDRT.ISubreportObject)
 CRAXDDRT.ISubreportObject sub = (robj as CRAXDDRT.ISubreportObject);
 Trace.WriteLine("Processing sub report: " + sub.Name);
 SwitchTable(sub.OpenSubreport());
 Trace.Unindent();
 protected virtual void SwitchTable(CRAXDDRT.Report rpt)
 Trace.Indent();
 foreach (CRAXDDRT.IDatabaseTable table in rpt.Database.Tables)
 Trace.WriteLine(" Processing table: " + table.Name);
 // this one line should do it
 (table.ConnectionProperties["Database"] as CRAXDDRT.IConnectionProperty).Value = DBName;
 // but it didn't so try this
 (table.ConnectionProperties["UseDSNProperties"] as CRAXDDRT.IConnectionProperty).Value = "1";
 // read that this 'might' work
 table.SetLogOnInfo(OdbcName, DBName, missing, missing);
 // but it didn't so I tried this with the user anme and password set
 table.SetLogOnInfo(OdbcName, DBName, "XXXXX", "XXXXX");
 // read that this is requiried, but it does nothing
 table.Name = table.Name;
 // this causes issues - the map fields thing pops up which is way not cool
 //table.Location = table.Name;
 Trace.Unindent();
 }//class
}//namespace
</pre>
 
At this point I really don't care which one will work the best, I am just desperate for a working solution. Any help, any at all would be greatly appreciated. 
 
Thanks 
 
-Cam 

This is a typical requirement of most application and is relatively trivial to implement. There are a lot of samples and documentation on our support site (links below). Also, search these forums for code snippets that will help you. BTW., do not use the craxDDrt.dll as you are not licensed to use it.
To look for downloads:
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
Articles:
https://www.sdn.sap.com/irj/sdn/businessobjects-articles
Notes:
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_ossnotes&query=&adv=true
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Dev. Library and API reference:
http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_dg_12_en.chm
http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_apiRef_12_en.chm
My recommendations:
https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23&overridelayout=true
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208edbbf-671e-2b10-d7b5-9b57a832e427
https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/702ab443-6a64-2b10-3683-88eb1c3744bc&overridelayout=true
Ludek
Edited by: Ludek Uher on Jul 21, 2009 8:38 AM

[IDCS3 WIN] Visual Studio 2005 SP1

Hi Folks,
Has anyone had success using Visual Studio 2005 SP1 to compile and run CS3 plug-ins?
I'm having a troubles running ID CS3 plug-ins complied with Visual Studio 2005 SP1 and running under Windows Vista. I know SP1 is not officially supported, but I had it installed. Before I go through the downgrade dance, I would like to know if downgrading has a chance to solve this issue...
The plug-in runs fine on Windows XP SP2 on the machine on which I compiled the plug-in. The plug-in does not run on a Windows Vista machine on which no compiler is installed.
So, I have complied the BasicPanel project, and when run on a Windows Vista machine (of which I only have access to one), I get the following error (as seen in the Configure Plug-ins window for the plug-in). Plug-in Information window's Errors section reads:
LoadLibrary failed. The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.
After reading through a bunch of online information about this error, I'm still as confused as ever (I'm more comfortable with Mac than Windows). It seems like (maybe?) there might be an issue with the dlls that ID has installed versus the ones that my complied plug-ins are interested in. Maybe VS2005 SP1 has newer dlls than are installed in ID CS3 and that's where the trouble lies?
Can anyone here shed any light on this for me?
Thanks in advance!!!!!
-- Jim

Hi All!
I create plug-ins for InDesign CS2 using Visual Studio C++ 2005 Expres Edition.
The plug-in runs fine in the computer that the VS C++ 2005 ED is installed.
But I get this error in computers where there is no VS C++ 2005 ED intalled:(xp sp2)
LoadLibrary failed. The application has failed to start ...
Thanks to your posts I come to the solution that installing,
Visual C++ 2005 Redistributable Package (x86) on the machine that has no VS C++ 2005 ED intalled, really solved the problem.
My Question is Has Any one solved the problem without having to install the Redistributable Package.??
I read something about the manifest but I'm confused.
Geting VS C++ 2003 really solves the problem, but It's hard for me to find I Licenced copy.
Thank you!

??? SDK 9.1 only support visual studio 2005? SDK XI only support visual studio 2010? I thought that adobe is a top product that uses the latest technology? Am I wrong???? SDK 9.1 only support visual studio 2005? SDK XI only support visual studio 2010? ...

??? SDK 9.1 only support visual studio 2005? SDK XI only support visual studio 2010? I thought that adobe is a top product that uses the latest technology? Am I wrong?
I want to develop a plugin for adobe acrobat 9+10+11 do I need “SDK 9.1 and Visual studio 2005” +“SDK 10 and Visual studio 2008” +“SDK 11 and Visual studio 2010”
Can’t I develop this plugin with visual studio 2013?

The SDK is produced when the version of Acrobat is released, so if you insist on using obsolete SDKs for obsolete Acrobat you can hardly criticise the Acrobat 9 SDK for being out of date.
To develop for Acrobat 9 (obsolete)+10+11 you can use the Acrobat 9 SDK but it may require some work and expertise to get it to work in all versions. Get the other SDKs for reference.

Visual Studio 2005 with SP1 for Windows 7 - 64 bit

Hi,
I am trying to install Visual Studio 2005 on a 64-bit platform (Windows 7). The version in about section reads Version 8.0.50727.42
(RTM.050727-4200)
I need to install the Service Pack 1 for Visual Studio 2005 but the installer available is for 32 bit (VS80sp1-KB932232-X86-ENU.exe)
This does not install on 64 bit system.
How do I get Visual Studio 2005 with SP1 installed ?
P.S- On the network I work on, I can see a Windows 2008 (64 bit) system with the version of Visual Studio 2005 that reads Version
8.0.50727.762 (SP.050727-7600) but I dont know how that was installed. Any help would be
appreciated.
Thanks,
Wilson

Hello WillisB,
I think your concern is the name X86 here. Actually Visual Studio is x86 version and we do not have a x64 version Visual Studio. So if you install Visual Studio on X64 version, it is also available. And when you see this page
http://www.microsoft.com/en-hk/download/details.aspx?id=7524 You can see the system requirements:
Supported Operating System
Windows 7; Windows Server 2008; Windows Server 2008 R2; Windows Vista
Processor/RAM:
Vista hardware requirements.
Required Software: licensed copy of a Visual Studio 2005 and Visual Studio 2005 Service Pack 1.
So please don't mind the name x86, the update can still be installed on Win 7 x64.
By the way, to install Visual Studio 2005 on Win 7, please check YiChun's post on this thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/f75d8ff2-bed4-473b-bc9c-6faf78c5d83a/installing-visual-studio-2005-pro-on-windows-7-pro-64bit?forum=vssetup
"To apply Visual Studio 2005 on Windows 7, please check the following points step by step:
- Download Visual Studio 2005 SP1 and install it
Visual Studio® 2005 Express Editions Service Pack 1
Visual Studio® 2005 Service Pack 1 for Standard or above edition
- Download
Visual Studio 2005 Service Pack 1 Update for Windows Vista and install it
- When launch Visual Studio 2005, please run it with administrator privileges
(Right-click the icon >> "Run as Administrator")"
By the way, Visual Studio 2005 is out of our mainstream support, what about change to use some new version of VS? For example, Visual Studio 2013 Community version.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

OCCI for Oracle 9i and MS Visual Studio 2005

Hello.
Where do I get OCCI *.lib and *.dll files for Oracle 9i and MS Visual Studio 2005 (VC 8)?
Roman Perepelitsa.

I was able to use MS Visual Studio 2005 and OCCi classes. There is a catch though, I was not able to use the debug library dll as it will crash. So I was not able to debug any code using the VS debugger, instead, I use the old and lengthy process: insert printf statements.
Jeff

Visual Studio 2005 The remote connection to the device has been lost. Please verify the device connection and restart debugging.

Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get
The remote connection to the device has been lost.
Please verify the device conection and restart debugging.
I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back!
My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1.
Does anyone know how to resolve this problem?

I still can't debug. I have just tried a hard reset and I get the same problem
The build output is as follows
------ Build started: Project: BO, Configuration: Debug Any CPU ------
BO -> C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\BO.dll
------ Build started: Project: Printing, Configuration: Debug Any CPU ------
No way to resolve conflict between "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral, PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" and "System.Data.SqlServerCe, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes". Choosing "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral, PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" arbitrarily.
Printing -> C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\Printing\bin\Debug\Printing.dll
------ Build started: Project: MobileSeller, Configuration: Debug Any CPU ------
Consider app.config remapping of assembly "System.Data, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\WindowsCE\System.Data.dll] to solve conflict and get rid of warning.
Consider app.config remapping of assembly "System.Windows.Forms, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\WindowsCE\System.Windows.Forms.dll] to solve conflict and get rid of warning.
Consider app.config remapping of assembly "System, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\WindowsCE\System.dll] to solve conflict and get rid of warning.
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targets : warning MSB3247: Found conflicts between different versions of the same dependent assembly.
MobileSeller -> C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\bin\Debug\MobileSeller.exe
Done building project "MobileSeller.vbproj".
------ Skipped Deploy: Project: BO, Configuration: Debug Any CPU ------
Project not selected to build for this solution configuration
------ Skipped Deploy: Project: Printing, Configuration: Debug Any CPU ------
Project not selected to build for this solution configuration
------ Deploy started: Project: MobileSeller, Configuration: Debug Any CPU ------
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\windowsce\wce400\armv4\NETCFV2.ppc.armv4.cab'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\System.Data.Common.dll'
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v2.0\wce400\ARMV4\sqlce20.ppc.wce4.armv4.CAB'
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v2.0\wce400\ARMV4\sqlce20.dev.ppc.wce4.armv4.cab'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\InTheHand.Data.Adoce.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\InTheHand.Interop.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\Printing\bin\Debug\PocketHTMLprint_NetCF.dll'
Deploying 'C:\Dev\MILLAR CODE CABINET\VS2003CF\References\USICF.dll'
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v3.0\wce400\ARMV4\sqlce30.ppc.wce4.armv4.CAB'
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v3.0\wce400\ARMV4\sqlce30.repl.ppc.wce4.armv4.CAB'
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v3.0\wce400\ARMV4\sqlce30.dev.enu.ppc.wce4.armv4.CAB'
Deploying 'C:\Dev\VS2005CF\References\release\Signature.dll'
Deploying 'C:\Dev\VS2005CF\References\release\RealUpDown.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\Printing\bin\Debug\Printing.dll'
Deploying 'C:\Dev\VS2005CF\References\release\PhoneAPI.dll'
Deploying 'C:\Dev\VS2005CF\References\release\MVnetApplication.dll'
Deploying 'C:\Dev\VS2005CF\References\release\MobileHList.dll'
Deploying 'C:\Dev\VS2005CF\References\release\MobileGrid.dll'
Deploying 'C:\Dev\VS2005CF\References\release\ImageButtons.dll'
Deploying 'C:\Dev\VS2005CF\References\release\CreditCardValidator.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\BO.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\View.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Unscheduled.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Unschedule.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\tr.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\top.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Tools.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\tl.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\SmlButUnPressed.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\SmlButSquUnPressed.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\SmlButSquPressed.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\SmlButPressed.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Select1.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\sekonda3.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\sekonda2.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\sekonda1.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\ScrewDriver.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Scheduled.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Scheduled.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Schedule.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Scan.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Save.ICO'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Remove.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\ReceiptTemplate.htm'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Problem.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\PrintDC.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Print.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Prev.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\bin\Debug\PocketHTMLprint_NetCF.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\pocketHTMLprint.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Phone.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Page.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\NotesExist.ICO'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Notes.ICO'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Next.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\NewCust.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\MVNetLogoSmall.png'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\mtiny.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\MoneyScrew.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Money.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Magnify.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Lock.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Line.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\InvoiceTemplate.htm'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\gradus4.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\gradus3.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\gradus2.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\gradus1.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\FindVisit.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\FindCustomer.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Find.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\DropDown.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\dentsplus3.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\dentsplus2.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\dentsplus1.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\DentDevilsCar.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\DentDevils2.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\DentDevils1.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Default2.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Default1.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Cust.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Completed.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Cancelled.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Call.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\br.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\bottom.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\bl.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\BigButUnPressed.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\BigButPressed.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\bin\Debug\MobileSeller.exe'
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\windowsce\diagnostics\System_SR_enu.cab'
========== Build: 3 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 1 succeeded, 0 failed, 2 skipped ==========
Visual studio indicates that
Deployment Started
Depolyment Succeeded
Loading Symbols
Ready
and then I get the same problem ie The Remote connection to the device has been lost

Installa error for visual studio 2005 and Visual C++ 2005 on windows server 2003 SP@

Not able to install visual studio 2005 I am getting error “The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch” and for visual C++ 2005 after clicking the setup file nothing is displayed on the desktop. please guide. All the above software I am installing on windows server 2003 service pack2
Dear Gurus Please help me

You might want to try : MS Visual Studio 2008 and Visual C++ 2008 Express instead as this version is supported as well.
See:
For R12: Note 1070674.1 - MS Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 12 on Windows
For 11i : Note 1095124.1 - Microsoft Visual Studio 2008 and Visual C++ 2008 Express for Oracle E-Business Suite Release 11i on Windows
Regards,
Ronald

Getting "Couldnot find Installable ISAM" error in script task in SSIS 2005 when trying to open (.xlsx files) Excel 2007-2010 files using VB script in Visual Studio 2005

Hi Experts,
I am trying to open .xlsx file in script task of SSIS 2005. I am using the 32-bit AccessDatabaseEngine driver with the Connection string as "Provider= Microsoft.ACE.OLEDB.12.0; Data Source=xlsx file path; Extended Properties="Excel 12.0 Xml;
HDR=YES"" in script task.
When we debug the VB script in Visual Studio 2005 and encounters the statement app.open() it throws the error "Couldn't find installable ISAM".
My SQL server version is 2005 SP2 DE
OS is Windows server 2003 EE SP2
Could anyone please let me know what is the resolution for this error?
Thanks and Regards,
Adesh

Hi Adesh,
First, make sure the package runs in 32-bit runtime mode (set Run64BitRuntime property to False) because you are using the 32-bit ACE OLE DB Provider. If it is not the case, the issue may occur due to the corrupted drivers or registry keys. You can try to
reinstall the 2007 Office System Driver: Data Connectivity Components as Arthur suggested.
Regards,
Mike Yin
TechNet Community Support

Web Service Export Parameters missing when consumed by Visual Studio 2005

Hi,
I am using Visual Studio 2005 (2.0 framework) to consume bespoke SAP Web Services (SAP 4.7) however some of the export parameters are missing. I have tested the SAP web services with various XML tools and they all work perfectly.
Is there anything I can do to enable Visual Studio to genarate the correct proxy?
Many thanks for any tips.
Billy

This isn't going to work as well as I had thought.
That is correct that the Name and Value fields come back as XmlNode arrays. Each XmlNode array contains two XmlNode objects (or one if you received a null value from the db). One object contains the atrributes and one contains the value. I had planned on going into the ColumnValueType Value field and pulling the text of the 2nd XmlNode object.
Now here is the problem:
For every column you select you get a ColumnValueType object. Rather than being contained in some type of "Row" parent object, each column sits in the root of your results. For example, in the query I am using I am asking for the AlertingName and DnOrPattern columns of the NumPlan table. My results come back like this (simplified):
AlertingName
John Doe
DnOrPattern
1234
With the data in this format, I can't just do a foreach loop and iterate over the ColumnValueType objects.

Error in creating connection to Oracle in Visual Studio 2005

Hi all,
After installing Oracle 11 http://www.oracle.com/technology/software/htdocs/odtlic.html?url=/technology/software/tech/dotnet/utilsoft.html
successfully, when I made a connection between Visual Studio 2005 to Oracle following this instruction http://www.oracle.com/technology/obe/net11gobe/building.net/vs_otn2.htm#t1
At step 3, I got this problem message error:
"An unexpected error occurred in the Oracle Data Provider for .NET. Please contact the provider vendor to resolve this problem".
If anybody has a solution, could you please help me ?
Thanks in advance,
Greetings,
Joesy

OK, in short:
Cause: Wrong OPMN request port used to configure the connection (third step of "Create Application Server Connection" wizard). You might have kept the default (6003) but your OPMN is configured with different request port.
Solution: Check $ORACLE_HOME/opmn/conf/opmn.xml file and look for entry like this:
<port local="6140" remote="6240" request="6040" />
Create the connection using OPMN request port that is set in opmn.xml file.
Thanks
Shail

Visual Studio 2005 crashes when referencing ALI 6.5 portal server API

Visual Studio 2005 crashes when referencing ALI 6.5 portal server API
We are building new portlets in .NET 2.0 to that access the ALI 6.5 server API and are experienceing the folowing scenario:
I create a brand new project in Visual Studio (2005 with SP1 on Win2k3 R2 SP2) using the ALI Portal Project template that is provided with the application accelerator 1.1. This portlet will need to perform portal server searches so I begin by adding references to the following assemblies from C:\bea\alui\ptportal\6.5\bin\assemblies:
openconfig.dll
opencounters.dll
opencache.dll
openhttp.dll
openssl.dll
opentempfile.dll
plumtreeserver.dll
ptportalobjects.dll
I then type in something like below to start up the portal server objects.
protected void Page_Load(object sender, EventArgs e)
IOKContext context = OKConfigFactory.createInstance("C:\\bea\\alui\\settings\\", "portal");
PortalObjectsFactory.Init(context);
this.Response.Write("Portal Objects Initiallized");
Some moments later Visual Studio will crash. It has happened before I have entered any code, after I have started typing code and on builds. It seems intermittent but usually occurs within a minute of interacting with this Visual Studio project. I actually managed to build once and have had success accessing this page in Explorer to validate the portal server objects are getting initialized and referenced correctly.
I thought this was a problem with my personal development environment. So I tried this on other machines: another Win2k3 ALI 6.5 dev portal server and another server with Visual Studio 2005 that I installed the 6.5 portal on just for testing this. The exact behavior listed above is occurring on three development machines here (crashing devenv.exe when portal references are made or loading a project with portal references). Since this does not seem to be isolated to a single development machine, is there any course of action that anyone would suggest to help solve this?
thanks,
Troy Rackley

It turns out that this is only a problem with Visual Studio using the ALI templates or creating any projects using the "New... Web site" functionality of 2005. I was a ble to create a C#... ASP.net Web Application project and add the references to the idk and the local portal server APIs manually without devenv.exe crashes.
So, the work around I have found if your projects needs to access both the portal server API and the remote API is to create the project with:
New... Project... Visual C#... ASP.NET Web Application
and NOT
New... Web Site... ASP.NET Web Site (or ALI Portlet Project)
Anyone know why this is the case?
Thanks.
Troy

156" width Crystal Report with Visual Studio 2005

Post Author: kunchesm
CA Forum: .NET
Hi,
I have a requirement to design a 156" width report (for exporting to Excel). And naturally i dont have printers to support this huge width reports (as these reports are not used for printing but just for exporting to Excel).
One of the option which i have tried to design these reports is -
- Installed MIcrosoft XPS Document writer and
- Created a new server form (in Printers&Faxes>File>Server Properties) and assigned my custom width & Height for the paper size as per my requirement
- Used this printer and form in my crystal report
Now, my question... is there any better alternative or option to design huge width Crystal reports in Visual studio 2005? Any help in this regard is highly appreciated!
Thanks & Regards
ksm

Hi Ganesh,
So it all depends on how you created your WEB Project. If it was a CR Web App then no issues, if it was a WEB Form app then no issues except you need to copy the whole folder: C:\inetpub\wwwroot\VS2013WebsiteCR\aspnet_client
to your app folder, maybe...
If it was an empty WEB app then it may be an issue with permissions ( more on this soon once we do some testing, R&D may have provided a work around to get IIS Express to work, not sure about using IIS directly.
Also search on Sessions and PostBacks, to get the second page you need to keep the session open/active. If not you may get nothing ot the same page everytime.
Don

Visual Studio 2005, embedded Crystal Report problem

I am very new at .NET, and this is my first post to this forum.
I've created a Crystal Report within a project using Visual Studio 2005 Professional Edition, on a Windows XP machine. I set the report as the ReportSource for a CrystalReportViewer on the main form. I can see data in the report in design view when I right-click on any of the fields and click "Browse Field Data". But when I preview the report, or run it in the application, all I see are the column headings and report title. I am hoping I am leaving out something obvious. I've researched this for two days without success.
The report's detail section is NOT suppressed, btw.
FYI (although I think it might not be relevant, because I don't see the data when I preview it in Visual Studio either) the report is displayed in the application when a button is clicked, as follows:
    Private Sub cmdRunLog_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdRunLog.Click
            CrystalReportViewer1.DisplayToolbar = True
            cmdRunLog.Text = "Hide Run Log"
            cmdUpload.Enabled = False
            cmdReports.Enabled = False
            cmdManualRun.Enabled = False
            CrystalReportViewer1.Visible = True
            CrystalReportViewer1.Height = 600
            CrystalReportViewer1.Width = 1000
            CrystalReportViewer1.Left = 10
            Dim strReportSQL As String = "Select * From dbo.PositivePayRunLog"
            Dim DA As New SqlDataAdapter(strReportSQL, conPP)
            Dim DS As New DataSet
            'Variable to assign the report name
            Dim strReportPath As String
            DA.Fill(DS)
            strReportPath = "c:\Positive Pay\PositivePayRunLog.rpt"
            If Not IO.File.Exists(strReportPath) Then
                _ErrorText = "Unable to locate report file: " & strReportPath
                ' Throw (New Exception("Unable to locate report file:" & vbCrLf & strReportPath))
                GoTo cmdRunLog_Click_Error
            End If
            Dim rptDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            rptDocument.Load(strReportPath)
            rptDocument.SetDataSource(DS.Tables(0))
            rptDocument.Refresh()
            CrystalReportViewer1.ShowRefreshButton = False
            CrystalReportViewer1.ShowCloseButton = False
            CrystalReportViewer1.ShowGroupTreeButton = False
            CrystalReportViewer1.ReportSource = rptDocument
end sub
I'm hoping that this is a common problem with an easy answer
Thanks,
John Sandin

>
Jason Everly wrote:
> Did you design the report using OLEDB or ODBC instead of against the schema of the dataset you are passing? It could be seeing data from the database when browsing.
>
> Technically you should design the reports against the schema of the dataset you are going to be passing, not against ODBC or OLEDB.
>
> You can usually get away with passing datasets to a report created against OLEDB, but if issues occur then you need to redesign them against the ds schema.
>
> Jason
I have done both, but I was currently using OLEDB.
I redesigned the report to use a dataset containing the correct data. Now, when I browse the fields, I see nothing. When I preview the report, I see what appears to be dummy data (a list of colors, etc).
But the GOOD news is: When I run the report in the application, I see the correct data!
Thanks! I think I'm good to go now. I will also apply the other suggestions, and try to simplify things.

XML in InDesign CS2 and Visual Studio 2005

Similar Messages

Maybe you are looking for