XML output while running in Apps 11i
Hi,
I'm running a report in Oracle Applications 11i. Is it possible to customize the report so that when it runs (invoked as a concurrent request), it generates XML output (to a file) rather than (or in addition to) a report on screen? Is there some parameter setting that would allow this?
Thanks,
- NR
hello,
in case the version you use is 6i you can use the parameters DESFORMAT, DESTYPE and DESNAME to determine type, format and destination of your report.
by spefifying DESTYPE=FILE DESFORMAT=XML DESNAME=myfile.xml it will produce a file called myfile.xml in XML format.
the only thing that is questionable, is if applications 11i lets you specify these parameters. you will have to check that with your applications 11i support.
regards,
the oracle reports team
Similar Messages
-
Error while clonning Oracle app 11i
Hi all Once again, a new day a new error :)
i am having Error while clonning Oracle app 11i on windows 2003 sp1 32 bit db 9.2.0.6.0
when running adcfgclone.pl dbTier it successfully runs uptill 70% at this stage it throws the below error
================================================================================================
Beginning database tier Apply - Wed Mar 7 01:49:19 2012
Log file located at d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\ApplyDBTier_03070149.log
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
ERROR while running Apply...
ERROR: Failed to execute adclone.pl
Please check logfile.
=================================================================================================
when i check the ApplyDBTier_03070149.log
i found this below
==============================================================================================================================================================================================================================
Skipping Profile Phase
Skipping Apply Phase
Executing StartDbLsnr...
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:50 AM
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:50 AM
NPRO_hassan.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\neproddb\9.2.0
LOCAL : NPRO
ORACLE_SID :
PATH : d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\neproddb\9.2.0\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;../jre/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe;C:\mksnt\bin;C:\mksnt\bin\X11;C:\mksnt\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\bin;;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH : d:\oracle\neproddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\addlnctl.txt"
ECHO is off.
ECHO is off.
Starting listener process NPRO ...
ECHO is off.
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 07-MAR-2012 01:50:56
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCNPRO))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=hassan.com)(Port=1534))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 07-MAR-2012 01:50:57
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
NL-00280: error creating log stream d:\oracle\neproddb\9.2.0\network\log\npro.log
NL-00278: cannot open log file
SNL-00016: snlfohd: error opening file
32-bit Windows Error: 13: Permission denied
Listener failed to start. See the error message(s) above...
addlnctl.cmd exiting with status 3
.end std out.
.end err out.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hassan
sDbDomain : com
sDbPort : 1534
sDbSid : NPRO
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:51 AM
ECHO is off.
ECHO is off.
Wed 03/07/2012 01:51 AM
NPRO_hassan.cmd exiting with status 0
ECHO is off.
The environment settings are as follows ...
ECHO is off.
ORACLE_HOME : d:\oracle\neproddb\9.2.0
LOCAL : NPRO
ORACLE_SID :
PATH : d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;d:\oracle\neproddb\9.2.0\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;../jre/1.3.1/bin;d:\oracle\neproddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\perl.exe;C:\mksnt\bin;C:\mksnt\bin\X11;C:\mksnt\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;d:\oracle\neproddb\9.2.0\bin;;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin;d:\oracle\neproddb\9.2.0\jre\1.4.2\bin
LD_LIBRARY_PATH : d:\oracle\neproddb\9.2.0\lib
ECHO is off.
ECHO is off.
The log information will be written to
"d:\oracle\neproddb\9.2.0\appsutil\log\NPRO_hassan\adcrdb_NPRO.txt"
ECHO is off.
ECHO is off.
Creating the control file for NPRO database ...
ECHO is off.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:01 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
DIM-00010: SYSTEM\CurrentControlSet\Services\OracleService key does not exist
O/S-Error: (OS 2) The system cannot find the file specified.
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:42 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ORA-01012: not logged on
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
ORA-01031: insufficient privileges
ERROR:
ORA-01031: insufficient privileges
ORA-01031: insufficient privileges
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
SP2-0640: Not connected
ECHO is off.
Checking for errors ...
ECHO is off.
The database has not been successfully created. Shutting down the instance...
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Mar 7 01:51:52 2012
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01031: insufficient privileges
adcrdb.cmd exiting with status 1
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : hassan
sDbDomain : com
sDbPort : 1534
sDbSid : NPRO
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@hassan.com:1534:NPRO
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hassan.com)(PORT=1534))(CONNECT_DATA=(SERVICE_NAME=NPRO.com)))
Exception occurred: java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: Control file creation failed
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:474)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:319)
at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:295)
at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:154)
at java.lang.reflect.Constructor.newInstance(Native Method)
at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:68)
at java.lang.Thread.run(Unknown Source)
==============================================================================================================================================================================================================================
please help me out with your advices
Thanks
HassanDear Hussein / helios ,
it worked finally i gave a high number 76 and it worked with out any problem also this time i gave loop back adapter an ip address i just remember now that i was not giving an ip to my loop back adapter i gave as below
ip : 10.10.10.10
subnet : 255.255.255.0
and made my host file look like as
127.0.0.1 localhost
10.10.10.10 hassan.com hassan
then i tested the ping by pinging hassan.com and the reply came from 10.10.10.10
and also i disabled my wireless network card before running adcfgclone
and it worked ALLHAMDOLLILAH :)
Thanks to the great masters Hussein & Helios :)
Now its time for appsTier cloning hope that it goes smooth :)
Regards,Re: Error while clonning Oracle app 11i
Hassan -
Error while running the APP-F110 & Dunning - F150
HI Guru's,
while running the APP,,,i got the message finally <b>posting orders"1 generated,1completed"</b>,,,,,,,But i am not getting the spool request and printout
In the same way in dunning,,i did the entire procedure,but not getting the spool request...
kindly help me
Regards
Sap Guruhi Sapguru,
ok, Congrats for posting the Orders...haa
Go to Tcode <b>SE38</b> and enter the program as <b>RFFOUS_C</b> and execute it.
In that screen enter the <b>Identification and program run date</b> and enter all the required firelds and then again execute it....
So that u can print the Check with the check lot number that u have created
Please create the check lot number in <b>FCHI</b>.
If u want to see the spool then go to <b>SP01 </b>and see there...
Hpe this resolve our problem...
assign the points if usefulll
Ranjit
null -
My ipad has locked-up, it has frozen while running an app, and will not respond to any button, what do I do?
It simply stays on the same screen image, and does not respond to anything. When I plug it into itunes, there is no indication of its presence.
The ipad's clock has also stopped.
eekTry a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo. -
Report is giving wrong output while running in Background ?
Hi,
We have a report program which gives the correct output while running it in forground(or manually) but when we run it in backgroud it gives the wrong output. (The printout goes to the wrong printer.)
I've read in a SAP doc that:
NEW-PAGE PRINT ON even gives unpredictable
results when the print parameters are incomplete; and it suggested to use FM 'GET_PRINT_PARAMETERS to validate the print parameters before NEW-PAGE PRINT ON event . I tried the same but still our report is sending the printout to the wrong printer while running it in background.
Other events used in the program are AT NEW and AT LAST .
Can anyone confirm me NEW-PAGE PRINT ON, AT NEW and AT LAST events work correctly in background mode also.
Thanks,
Bhavanahi
good
NEW-PAGE PRINT ON should be work in the background also,check your syntax with the below syntax,if still it is going to the different printer in the background than check with the configuration setting of printer for the particular report that you r printing,sometime it happens that even in the foreground the correct printer ideanfies but in the background that same printer didnt identify.
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS pripar
ARCHIVE PARAMETERS arcpar
NO DIALOG.
DO 440 TIMES.
WRITE (3) sy-index.
ENDDO.
NEW-PAGE PRINT OFF.
ENDFORM.
thanks
mrutyun^ -
My i pad got stuck while running an app. tried to restart but failed. pls assist
my i pad got stuck while running an app. tried to restart but failed. pls assist
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
-
What app captures audio while running other apps simultaneously?
Anyone know of an app that allows the user to pause and and start audio recording while running other apps simultaneously? An app with a widget residing in the corner of the sceen while the user navigates other apps on the ipad? Any solutions?
Really? can't say I've ever needed that - besides, separate volume controls in every app is going to
get unwieldy if you run a lot of apps.
To be honest, it's really only needed for browsers like Safari. I'm surprised you've never needed it? Have you never been listening to iTunes while browsing, and come across some stoopid website that insists - uninvited - on assaulting your ears with some garbage or other? For example, some of the lyrics sites play some godawful rock video. I used Detour all the time.
I've had a look at Wiretap, but tbh over $100 is one helluva price just to mute Safari (though probably worth it if you use all its features).
Kappy, thanks for the suggestion, I will have a look at those two resources. -
Error while install Oracle Apps 11i
I'm installing Oracle Apps 11i (VIS) on SUN Solaris.
Please advise me.
thanks a lot.
================================
Rapid Install Wizard is validating your file system......
Rapid Install Wizard will now launch the Java Interface.....
root@dbserver # Database logfile - /data1/VIS/visdb/9.2.0/appsutil/log/VIS_dbser
ver/10030640.log
Appltop logfile - /apdata1/VIS/visappl/admin/VIS_dbserver/log/10030640.log
AC-50201: Following error encountered while setting backup location of Contextfi
le : Out directory could not be created at :/apdata1/VIS/visappl/admin/VIS_dbser
ver/out/10032332
Error occured before Context Value Management could be completedthis's a log.
================================================
Succesfully changed Permissions for /apdata1/VIS/visappl/admin/VIS_dbserver/log
Processing DriverFile = /NAS/Stage11i/StartCD/Disk1/rapidwiz/template/adriapps.drv
Running Instantiation Drivers for /NAS/Stage11i/StartCD/Disk1/rapidwiz/template/adriapps.drv
instantiate file:
source : /NAS/Stage11i/StartCD/Disk1/rapidwiz/template/adrunias.sh
dest : /apdata1/VIS/viscomn/temp/adrunias.sh
AC-00437: Unable to backup : /apdata1/VIS/viscomn/temp/adrunias.sh to /apdata1/VIS/visappl/admin/VIS_dbserver/out/templbac/adrunias.sh: java.io.FileNotFoundException: /apdata1/VIS/visappl/admin/VIS_dbserver/out/templbac/manifest.txt (Permission denied)
Raised by oracle.apps.ad.autoconfig.InstantiateFile
setting permissions: 755
setting ownership: applvis:dba
instantiate file:
source : /NAS/Stage11i/StartCD/Disk1/rapidwiz/template/adrunat.sh
dest : /apdata1/VIS/viscomn/temp/adrunat.sh
AC-00437: Unable to backup : /apdata1/VIS/viscomn/temp/adrunat.sh to /apdata1/VIS/visappl/admin/VIS_dbserver/out/templbac/adrunat.sh: java.io.FileNotFoundException: /apdata1/VIS/visappl/admin/VIS_dbserver/out/templbac/manifest.txt (Permission denied)
Raised by oracle.apps.ad.autoconfig.InstantiateFile
setting permissions: 755
setting ownership: applvis:dba
Step 0 of 5
Command: /apdata1/VIS/viscomn/temp/adrunias.sh
Step 3 of 5: Doing UNIX preprocessing
Executing: chmod -R 777 /var/opt/oracle/oraInventory
chmod -R 777 /var/opt/oracle/oraInventory has succeeded
Processing Step 3 of 5
Executing: su applvis -c "/apdata1/VIS/viscomn/temp/adrunias.sh APPS APPS"
STARTED INSTALL PHASE : APPS TECH STACK : Tue Oct 3 19:33:54 ICT 2006
runProcess_1
Copying jre1.1.8 to the common_top
runProcess_2
Statusstring Installing Oracle iAS
Enter the location of the CD labeled Oracle Applications Rapid Install - Tools Disk 1 :
Checking Disk contents in - /NAS/Stage11i/StartCD/Disk1/rapidwiz
Checking Disk contents in - /NAS/Stage11i/oraiAS/Disk1
Checking Disk contents in - /NAS/Stage11i/oraiAS/Disk1
UnzipCount:208
Processing Disk1....
Processing Disk2....
Processing Disk3....
Processing Disk4....
runProcess_3
Statusstring Configuring iAS ORACLE_HOME
runProcess_4
Statusstring Configuring 806 ORACLE_HOME
runProcess_5
adlnk806.sh started at Tue Oct 3 20:31:57 ICT 2006
Log file located at /apdata1/VIS/visora/8.0.6/install/make_10032031.log
adlnk806.sh completed sucessfully
runProcess_6
Statusstring Link iAS HOME
adlnkiAS.sh started at Tue Oct 3 20:36:04 ICT 2006
Log file located at /apdata1/VIS/visora/iAS/install/make.log
Found ORACLE_HOME is IAS1022. Starting relinking...
adlnkiAS.sh completed sucessfully
runProcess_7
Statusstring Creating symblic link to /apdata1/VIS/viscomn/util/java/1.4/j2sdk1.4.2_04 from /apdata1/VIS/visora/iAS/Apache/jdk
runProcess_8
Creating link for iAS ORACLE_HOME/6iserver pointing to 8.0.6 Home
runProcess_9
Statusstring Registering iAS ORACLE_HOME with OUI inventory
Log file located at /var/opt/oracle/oraInventory/logs/OracleHomeCloner_10030842.log
ORACLE_HOME /apdata1/VIS/visora/iAS was registered successfully.
FINISHED INSTALL PHASE : APPS TECH STACK : Tue Oct 3 20:42:47 ICT 2006
There was an error while running the command - su applvis -c /apdata1/VIS/viscomn/temp/adrunias.sh APPS APPS
/apdata1/VIS/visora/iAS/6iserver: No such file or directory
su applvis -c "/apdata1/VIS/viscomn/temp/adrunias.sh APPS APPS" has succeeded
Step 1 of 5
Command: /apdata1/VIS/viscomn/temp/adrunat.sh
Step 4 of 5: Doing UNIX preprocessing
Executing: chmod -R 777 /var/opt/oracle/oraInventory
chmod -R 777 /var/opt/oracle/oraInventory has succeeded
Processing Step 4 of 5
Executing: su applvis -c "/apdata1/VIS/viscomn/temp/adrunat.sh APPS APPS"
STARTED INSTALL PHASE : APPLTOP : Tue Oct 3 20:42:49 ICT 2006
runProcess_1
Statusstring Installing APPLTOP - gappl.drv
Enter the location of the CD labeled Oracle Applications Rapid Install - Appl_top Disk 1 :
Checking Disk contents in - /NAS/Stage11i/StartCD/Disk1/rapidwiz
Checking Disk contents in - /NAS/Stage11i/oraApps/Disk1
Checking Disk contents in - /NAS/Stage11i/oraApps/Disk1
UnzipCount:1248
Processing Disk1....
Processing Disk2....
Processing Disk3....
Processing Disk4....
Processing Disk5....
Processing Disk6....
Processing Disk7....
runProcess_2
Statusstring Copying the APPL_TOP Context template file.
FINISHED INSTALL PHASE : APPLTOP : Tue Oct 3 23:31:52 ICT 2006
su applvis -c "/apdata1/VIS/viscomn/temp/adrunat.sh APPS APPS" has succeeded
Creating logfile - /apdata1/VIS/viscomn/admin/log/VIS_dbserver/txkSetSOHM.log
Running txkSOHM.pl script - su applvis -c "/apdata1/VIS/visora/iAS/Apache/perl/bin/perl -I /apdata1/VIS/visora/iAS/Apache/perl/lib/5.00503 -I /apdata1/VIS/visora/iAS/Apache/perl/lib/site_perl/5.005 -I /apdata1/VIS/visappl/au/11.5.0/perl /apdata1/VIS/visappl/fnd/11.5.0/patch/115/bin/txkSOHM.pl contextfile=/apdata1/VIS/visappl/admin/VIS_dbserver.xml type=primary 806soh=/apdata1/VIS/visora/8.0.6 iASsoh=/apdata1/VIS/visora/iAS configtop=/apdata1/VIS/viscomn/conf/VIS_dbserver appspass=apps autoconfig=n"
*** USER FEEDBACK ***
Absolute path of Application's Context XML file : /apdata1/VIS/visappl/admin/VIS_dbserver.xml
Type of Instance [primary/secondary] : primary
Absolute path of Shared Oracle Home top :
Absolute path of 8.0.6 Shared Oracle Home : /apdata1/VIS/visora/8.0.6
Absolute path of iAS Shared Oracle Home : /apdata1/VIS/visora/iAS
Absolute path of config top : /apdata1/VIS/viscomn/conf/VIS_dbserver
Run AutoConfig [y/n] : n
Oracle Application apps schema password : apps
Absolute path of the log file : /apdata1/VIS/viscomn/admin/log/VIS_dbserver/txkSetSOHM.log
Prompt for confirmation [y/n] : n
Absolute path of 8.0.6 config Home : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6
Absolute path of iAS config Home : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS
Application's Context file Saved as : /apdata1/VIS/visappl/admin/VIS_dbserver.xml.SOH
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6 ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/logs ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Jserv/logs/jvm ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/htdocs/discwb4/applet ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/modplsql/cache/plsql ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/vbroker/adm/impl_dir ...
Creating directory /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/discwb4/bin/.reg ...
Searching Applications Context file for substitutions of:
/apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6
/apdata1/VIS/viscomn/conf/VIS_dbserver/iAS
Context Variable: s_weboh_tnsadmin
Present value : /apdata1/VIS/visora/iAS/network/admin/VIS_dbserver
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/network/admin/VIS_dbserver
Context Variable: s_tools_tnsadmin
Present value : /apdata1/VIS/visora/8.0.6/network/admin/VIS_dbserver
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/network/admin/VIS_dbserver
Context Variable: s_web_pid_file
Present value : /apdata1/VIS/visora/iAS/Apache/Apache/logs/httpd.pid
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/logs/httpd.pid
Context Variable: s_web_ssl_directory
Present value : /apdata1/VIS/visora/iAS/Apache/Apache/conf
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/conf
Context Variable: s_web_ssl_keyfile
Present value : /apdata1/VIS/visora/iAS/Apache/Apache/conf/ssl.key/server.key
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/conf/ssl.key/server.key
Context Variable: s_web_ssl_certfile
Present value : /apdata1/VIS/visora/iAS/Apache/Apache/conf/ssl.crt/server.crt
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/conf/ssl.crt/server.crt
Context Variable: s_web_ssl_certchainfile
Present value : /apdata1/VIS/visora/iAS/Apache/Apache/conf/ssl.crt/ca-bundle.crt
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/conf/ssl.crt/ca-bundle.crt
Context Variable: s_jserv_secret_key
Present value : /apdata1/VIS/visora/iAS/Apache/Jserv/conf/jserv.secret.key
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Jserv/conf/jserv.secret.key
Context Variable: s_web_home_file
Present value : /apdata1/VIS/visora/iAS/VIS_dbserver.env
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/VIS_dbserver.env
Context Variable: s_frmWalletDir
Present value : /apdata1/VIS/visora/8.0.6/forms60/wallet
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/forms60/wallet
Context Variable: s_forms60_wallet
Present value : /apdata1/VIS/visora/8.0.6/forms60/wallet
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/forms60/wallet
Context Variable: s_ifile
Present value : /apdata1/VIS/visora/8.0.6/network/admin/VIS_dbserver/VIS_dbserver_ifile.ora
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/network/admin/VIS_dbserver/VIS_dbserver_ifile.ora
Context Variable: s_ias_ifile
Present value : /apdata1/VIS/visora/iAS/network/admin/VIS_dbserver/VIS_dbserver_ifile.ora
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/network/admin/VIS_dbserver/VIS_dbserver_ifile.ora
Context Variable: s_listener_ifile
Present value : /apdata1/VIS/visora/8.0.6/network/admin/VIS_dbserver/VIS_dbserver_listener_ifile.ora
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/network/admin/VIS_dbserver/VIS_dbserver_listener_ifile.ora
Context Variable: s_tools_home_file
Present value : /apdata1/VIS/visora/8.0.6/VIS_dbserver.env
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6/VIS_dbserver.env
Context Variable: s_iASconfig_home
Present value : /apdata1/VIS/visora/iAS
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS
Context Variable: s_806config_home
Present value : /apdata1/VIS/visora/8.0.6
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/8.0.6
Context Variable: s_lock_pid_dir
Present value : /apdata1/VIS/visora/iAS/Apache/Apache/logs
New value : /apdata1/VIS/viscomn/conf/VIS_dbserver/iAS/Apache/Apache/logs
txkSOHM.pl successfully completed
.end std out.
.end err out.
Starting CVM on Middle Tier.....
java.lang.Exception: Out directory could not be created at :/apdata1/VIS/visappl/admin/VIS_dbserver/out/10032332 -
Error while running mobile app in nwds
Hi ,
I created a an app for handheld and while running the application i am getting an error as below in nwds.The mobile client is not opening and is giving below error.
java.lang.NumberFormatException: null
at java.lang.Integer.parseInt(Integer.java:415)
at java.lang.Integer.parseInt(Integer.java:497)
at com.sap.tc.mobile.cfs.console.MgmtConsole.initialize(MgmtConsole.java:43)
at com.sap.tc.mobile.cfs.init.FrameworkInitializer.startManagementConsole(FrameworkInitializer.java:338)
at com.sap.tc.mobile.cfs.init.FrameworkInitializer.init(FrameworkInitializer.java:102)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.tc.mobile.cfs.startup.pda.Startup.main(Unknown Source)
Error starting the framework
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.tc.mobile.cfs.startup.pda.Startup.main(Unknown Source)
Caused by: java.lang.IllegalStateException: Cannot initialize framework
at com.sap.tc.mobile.cfs.init.FrameworkInitializer.init(FrameworkInitializer.java:252)
... 5 more(FrameworkManager.java:259)
Please help me on this.
Thanks and regards,
rajesh
Edited by: Rajesh A on Apr 28, 2009 12:48 PM
Edited by: Rajesh A on Apr 28, 2009 1:40 PMHi Rajesh
If you are using 7.1, go to com.sap.tc.mobile.dt.oca.rt folder inside plugins folder.
If your client itself is not launching, delete the MI folder, unzip the laptop.zip, you will get a new MI folder.
Go to MI -> bin -> click startup.bat. Check if the client is launching.
Now deploy the application components and start the client.
Regards
Vidyadhar -
Labview is crashing (freezing) while running my app.
Running LV 7.1, the app just freezes while running at random points during execution. How can I purse some help with this?
Thanks,
BillHi Bill,
It does sound like this crash is specific to that machine. I did find a few logs of similar crashes in our notes but there's no record of anyone being able to reproduce the error and hence solve it.
Do you have to use this machine for your application? Could you use the machine you know works?
It is likely that there was a problem with the initial installation of LabVIEW. If you do need to use this machine, I would recommend doing a complete uninstall and reinstall of all NI Software. The directions for this are in the attached word document and the MSI blast software you need is at the following link:
http://forums.ni.com/ni/board/message?board.id=250&message.id=12643&requireLogin=False
Message Edited by SarahB on 07-25-2006 11:22 AM
Sarah
Applications Engineer | National Instruments | UK & Ireland
Attachments:
Removing NI Software.doc 27 KB -
I love my blackberry 8900 and have found some cool fitness gps apps that track my distance, etc. The problem I have is I can't figure out how to access incoming messages or how to send a text message while keeping the app active. There are pause buttons on the ones I've used, but if I try to get out of the app screen it will log me off the workout completely. Now granted, I don't do a lot of texting during my workouts (cycling) but still - would be nice to be able to pause it and maybe send something liek "home in a few mins " then continue on with the same workout.
I figured it out - I programmed my left side button to go straight to my IM program. I can send and receive messages and go back to my workout without stopping it
-
Problem with the ABAP List output while running program in background.
Hi ,
This is Sudhir S . I am trying to run a report in background which has 60 columns , but only 13 are displayed when we view it through the spool abap list .
But when I run in foreground all the 60 columns are displayed. Since the data which I am trying to fetch is large I am running the report as a background job .
I just need to know what can be done to get the 60 columns in spool abap list output.
waiting for your reply.
<removed by moderator>
With Regards
Sudhir S
Edited by: Thomas Zloch on Oct 6, 2010 1:51 PM - please do something else while waiting, all posts have the same priority hereHi,
Check if SAP note 1226758 resolves this problem.
Regards,
Aidan -
Strange ZipException thrown while running JNLP app deployed on linux
Hi,
I am trying to deploy my app via JNLP but I run into strange errors while using linux server (Ubuntu). I am using com.sun.javaws.servlet.JnlpDownloadServlet
to serve JNLP files. Everything works perfect when deploy app to local JBoss on Windows7, but the same code deployed on the remote Linux machine causes strange error:
java.util.zip.ZipException: invalid entry size (expected 26915 but got 21579 bytes)
at java.util.zip.ZipOutputStream.closeEntry(Unknown Source)
at java.util.zip.ZipOutputStream.finish(Unknown Source)
at java.util.zip.DeflaterOutputStream.close(Unknown Source)
at java.util.zip.ZipOutputStream.close(Unknown Source)
at com.sun.deploy.net.HttpDownloadHelper.download(Unknown Source)
at com.sun.deploy.cache.Cache.downloadResourceToTempFile(Unknown Source)
at com.sun.deploy.cache.Cache.downloadResourceToCache(Unknown Source)
at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadJarFiles(Unknown Source)
at com.sun.javaws.LaunchDownload.downloadEagerorAll(Unknown Source)
at com.sun.javaws.Launcher.downloadResources(Unknown Source)
at com.sun.javaws.Launcher.prepareLaunchFile(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.prepareToLaunch(Unknown Source)
at com.sun.javaws.Launcher.launch(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Both machines uses JDK 6u14, all the jars have been succesfully signed.
Any ideas? I am going insane:(aleksjej wrote:
...Also in both cases archives opens successfully in 7zip.That means nothing that is relevant to a Java application launch.
What is relevant to a Java application launch is whether J2SE classes can open the archives. The easiest way to find out is using the Jar tool in the SDK. Java does not support all forms of compression that are possible in ZIP archives, just a limited sub-set. -
Keyboard Problem while running Swing App on LINUX
Hi All,
We have a Swing based Application running on Windows Platform. We need to run the Application on LINUX. The Application does not have any problem and runs without problems for a few minutes but after that the keyboard stops to respond inside the application. Keyboard runs fine outside the application but no key events are recognized inside the application. Mouse is working fine even after the keyboard stops responding.
Key Points:
� The keyboard is a PS/2 keyboard.
� Read Hat Fedora 5.0 is being used.
� The problems occur on both KDE and GNONE.
� The Java Version is jdk1.5.0_09
The application is data entry application using EJB at server side. The client UI has lot of JTables and Desktop Panes/ Internal Frames. User use ctrl+tab, ctrl+shift+tab, tab, shift+tab, and other hot keys to navigate between Components. Listeners on keyboard Focus Owner are also used. We are unable to diagnose the problem because of the undeterminable nature of the problem. The problem occurs at anytime and does not occur on any special key/ combinations press.
Thanks and Regards,
Nishant Saini
http://www.simplyjava.comI've just installed the JDK 1.4 on my debian box. I
can compile and run a basic Hello World app using
System.println, but when I try to run a simple swing
app, I get an error like:
Exception in thread "main"
java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.... etc, etc.
It goes on with about 30 different classes. It
compiles fine, with no errors, but when it comes time
to run, that's what I get. This is what I have in my
.bash_profile as far as environment variables go:
export JAVA_HOME="/usr/local/j2sdk1.4.1_01"
export PATH="$JAVA_HOME/BIN:$PATH"
export
CLASSPATH="$JAVA_HOME/jre/lib/:$JAVA_HOME/lib:."The code works fine in Windows, so unless there's
something platform-specific, I don't think there's a
problem there. I've checked to make sure I'm not
running kaffe by accident and I'm definitely running
the right java and javac. I'm out of ideas. Any
suggestions would be greatly appreciated.
-dudley
I may just be crazy, but your PATH looks a little screwy to me. I was under the impression that the standard java installation has its executables in the 'bin' directory, not the 'BIN' directory. Unless Debian has fallen to the evil empire, then I'm fairly sure file names are case-sensitive. I don't know if that will fix your problem though. Do you compile from the command line, or do you use an IDE??? -
I am running ATG[10.1.2] app on Jboss [EAP 5.1.0 GA] I am able to open dyn/admin however when I start my app I get the below error
java.lang.LinkageError: loader constraint violation: when resolving method "atg.servlet.ServletUtil.setSessionConfNumCacheRequest(Ljavax/servlet/http/HttpServletRequest;)Ljavax/servlet/http/HttpServletRequest;" the class loader (instance of org/jboss/classloader/spi/base/BaseClassLoader) of the current class, atg/filter/dspjsp/PageFilter, and the class loader (instance of org/jboss/classloader/spi/base/BaseClassLoader) for resolved class, atg/servlet/ServletUtil, have different Class objects for the type javax/servlet/http/HttpServletRequest used in the signature
at atg.filter.dspjsp.PageFilter.doFilter(PageFilter.java:215)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at atg.servlet.ForwardFilter.doFilter(ForwardFilter.java:263)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at atg.servlet.ErrorFilter.doFilter(ErrorFilter.java:279)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:638)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:446)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:382)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:310)
at org.apache.catalina.core.StandardHostValve.custom(StandardHostValve.java:416)
at org.apache.catalina.core.StandardHostValve.status(StandardHostValve.java:342)
at org.apache.catalina.core.StandardHostValve.throwable(StandardHostValve.java:286)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:141)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:158)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:330)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:829)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:598)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:680)
11:22:47,413 ERROR [[localhost]] Exception Processing ErrorPage[errorCode=500, location=/global/errorPage500.jsp]The supported JBoss version for 10.1.2 is JBoss EAP 5.1.2 but I don't think that your issue is caused because of this. Your issue is more of an environmental thing as you are probably getting two different versions getting loaded of class javax.servlet.http.HttpServletRequest and so correspondingly two different Class objects as the error shows. One reason for this could be if you include any server-specific libraries (in present case the Servlet API JAR which contains the class javax.servlet.http.HttpServletRequest) of a different version in the /WEB-INF/lib of your web application. Try removing it from there if so and see if that helps.
Maybe you are looking for
-
Need Help: I need a check box to auto fill a set value in separate text field.
Hi, this is my first time with inserting scripts into a PDF Form. We have a form that requires the user to check a box regarding medical conditions they have (i.e. Asthma, Diabetes, Hypertension). Later in the form, they have to type out the same co
-
What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO gnrly
Hi all, What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally? Help will be surely rewarded. Thanks and Regards, Creasy
-
Can't connect Macbook Air 10.8.5 to new Officejet 6700
I don't have a CD drive, so I'm trying to set-up via instructions from the internet. Thus, far, I've uninstalled the previous HP printer, downloaded the suggested download multiple times--with no luck. There is no connection between my computer and t
-
How do I access iwork for ios docs stored in icloud on all ios devices
How do I access ios-iwork icloud docs on all my ios devices? ios 7.1.2 on all ios devices. Have zero access to my icloud docs on mobile devices since ios 7.0.
-
How do i reset my USA apple id password.
I have bought my mac book pro 13" which is bought in USA a year back. Now I have moved to Canada and created a new apple id. Now when i am trying to update the updates some of the updates is prompted for the password to the ID which i created in usa.