XML Populating Tree Map and JMenu

Hey I am looking for a way to populate a JMenu and A JTreeMap from an XML file.
The Layout is like
<node name="top">
<node name="Main" selected="true">
<node name="ChildOfMain1" selected="true">
<node name="ChildOfMain2" selected="true"/>
</node>
</node>
It is in this format due to the application I am tryingt o build has to import files from an old system we are using
Thanks

is there a class that will magically interpret your XML and create Swing components from it? no. are there libraries around that allow you to describe UIs in XML and have Swing generated from that XML? yes. loads. google "java XUL" and "swing xml" for an insight. can I tell you how to use them? no
incidentally, are you really constrained to that format? I ask because making the decision that "ChildOfMain" should be a sub-menu of "Main" isn't going to be easy. something like the following would be nicer
<menu name="top">
<menu_item name="Main">
<menu_item name="ChildOfMain1" />
<menu_item name="ChildOfMain2" />
</menu_item>

</menu>

Similar Messages

Populating Tree with External XML File

I want to use external files for populating Flex 3
components. I have been successful using code very similar to that
below for a data grid & for a combo box, but it won't work for
a tree. Can you determine wh?
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:HTTPService id="dp_Tree1" url="Tree1.xml" />
<mx:Tree dataProvider="{dp_Tree1.lastResult.root.node}"
creationComplete="dp_Tree1.send()" width="333"/>
</mx:WindowedApplication>
It's not working & I can't determine why. Attached is my
xml file that I tested it with.

Thanks a bunch folks, but my intent is to have as little code
as possible. I want to help people who are not coders create
designs using external xml files to populate controls. I was able
to create very simple code with just two lines to populate a
DataGrid from an external xml file:
<mx:HTTPService id="dp_DataGrid1" url="DataGrid1.xml"
/>
<mx:DataGrid
dataProvider="{dp_DataGrid1.lastResult.component.rows}"
creationComplete="dp_DataGrid1.send()" />
And just two lines for a ComboBox:
<mx:HTTPService id="dp_ComboBox1" url="ComboBox1.xml"
/>
<mx:ComboBox
dataProvider="{dp_ComboBox1.lastResult.component.rows}"
creationComplete="dp_ComboBox1.send()" />
Isn't it possible to populate a tree with two lines like as
it is with a DataGrid & ComboBox?

Error publishing plsql webservice (xml schema mapping and/or serializer)

Hi guys,
I'm with a problem when publishing plsql webservices from JDeveloper 11.
The scenario is something like this:
1) I have a connection with a database 9i, and the objects (packages, object types, etc) are all in there.
2) In this case, i can publish the package spec using the option "Publish as JAX-RPC Web Service" normally.
3) A database 11g was created, and i compiled the objects in this environment.
4) Then i've created a new connection with a database 11g.
5) In this case, when i'll publish the webservice, the error occurs: "The following types used by the program unit do not have an XML Schema mapping and/or serializer specified: REC_DMP_REMESSA"
I have no idea in how to solve this case. Someone can help?
Thank in advance.
Best Regards,
Gustavo

Duplicate of https://forums.oracle.com/thread/2610823
Timo

Custom Map in flash using XML data for dynamic map and point of intrest loading...

Been some time since I have used Flash for anything...
I'm working on a little project to dynamically build a map
and set points of interest on the map. At this time I have the
(mySQL) data being queried and formatted with PHP and pushing the
data to Flash as XML.
In starting the project I'm a bit lost... I mean I have my
data and a good XML format but as it is I'm lost on parsing the
data in Flash and assigning its values to movie clips or other...
I've looked at the Loader Component and the XML Connector
Component and find I can get that to work at all...
My second though was to create a single movie clip on stage
and give it an instance name of "Background" and have it load the
URL of an image given in the attached XML doc... Node "a_zone" and
the value given to attribute "image"... But this brings me back to
square one of not quite understanding Flash and parsing XML... With
this second idea I would use AS to create a movie clip, set it's X
& Y cords and load an image to it based on the XML attributes
listed in the "Gatherable" node (one for each node).
Any suggestions, examples or related info is welcome...
Thanks in advance!

Okay, that really wasn't what I was looking for... But I did
go back and RTM :-)
Here's what I have... 1st frame:
2nd Layer: movieclip with the instance name "currentPicture"
The image loads into "currentPicture" from the URL given in
the XML "a_zone" node attribute "image" just fine....
But I'm not able to grab the attributes of each "Gatherable"
node it seems... am I missing something or just not pointing to the
right node?
I keep getting:
undefined
undefined
undefined
Error opening URL
"file:///C|/apache2triad/htdocs/gatherer/flash/undefined"
Error opening URL
"file:///C|/apache2triad/htdocs/gatherer/flash/undefined"
Error opening URL
"file:///C|/apache2triad/htdocs/gatherer/flash/undefined"

Hi , friends pls explain abap mapping and message mapping

1) pls explain abap mapping and message mapping
send me screen shorts also.

Hi
Mapping Techniques
XI provides 3 standard ways of interface mapping between source and target.
Graphical mapping
Java Mapping
XSLT Mapping
Two more additional mapping types can be activated in XI by making changes to the exchange profile. Those two mappings are
ABAP mapping
XSLT mapping with ABAP Extensions
Graphical Mapping
Graphical mapping is a common approach followed by everyone for generating desired target structure. It involves simple drag-n-drop to correlate respective nodes (fields) from source and target structure. It hardly involves coding. (Exception - User defined functions). But sometimes with graphical mapping it is difficult to produce required output. For example ... text/html output, namespace change, sorting or grouping of records etc.
ABAP Mapping
A person comfortable with Object Oriented ABAP can go for ABAP mapping instead.
Java Mapping
Java Mapping uses 2 types of parsers. DOM and SAX. DOM is easier to use with lots of classes to help you create nodes and elements, but , DOM is very processor intensive.
SAX parser is something that parses your XML one after the other, and so is not processor intensive. But, it is not exaclty easy to develop either.
XSLT Mapping
One can also think of Java mapping as another option but it is a bit complex and required knowledge of Java. In such cases, XSLT mapping can be the best approach to meet the requirements.
A few example cases in which an XSLT mapping can be used:-
When the required output is other than XML like Text, Html or XHTML (html displayed as XML)
When default namespace coming from graphical mapping is not required or is to be changed as per requirements.
When data is to be filtered based on certain fields (considering File as source)
When data is to be sorted based on certain field (considering File as source)
When data is to be grouped based on certain field (considering File as source)\
Advantages of using XSLT mapping
XSLT program itself defines its own target structure.
XSLT programs can be imported into SAP XI. Message mapping step can be avoided. One can directly go for interface mapping once message interfaces are created and mapping is imported.
XSLT provides use of number of standard XPath functions that can replaces graphical mapping involving user defined java functions easily.
File content conversion at receiver side can be avoided in case of text or html output.
Multiple occurrences of node within tree (source XML) can be handled easily.
XSLT can be used in combination with graphical mapping.
Multi-mapping is also possible using xslt.
XSLT can be used with ABAP and JAVA Extensions.
Disadvantages of using XSLT mapping
Resultant XML payload can not be viewed in SXMB_MONI if not in XML format (for service packs < SP14).
Interface mapping testing does not show proper error description. So errors in XSLT programs are difficult to trace in XI but can be easily identified outside XI using browser.
XSLT mapping requires more memory than mapping classes generated in Java.
XSLT program become lengthier as source structure fields grows in numbers.
XSLT program sometimes become complex to meet desired functionality.
Some XSL functions are dependent on version of browser.
Different types of Mappings
MAPPING SUPPORTED BY XI
Message Mapping -> Graphical Design and testing environment. Default Provided By XI. Queue based modelling allow handling or large documents. Extensible via user defined functions
XSLT Mapping - > Based on openstandard, Portable across application platform, Extensible using user defined functions kewl but disadvantage is Memory overload while handling large documents.
SAX -> Simple Api For XML. -> Allows you to parse through a XML document. Doesn't consume any memory. But the message can be parsed only once from top to bottom. It Has evolved by contributions made by group of ppl itz a open architecture.
DOM -> Document Object Model -> Itz designed by W3C. Consumes Memory as the message will be loaded. Allows parsing of document in both way top down and bottom up.
Send me your email id.Shall send you very good docs for both ABAP Mapping and message mapping.
Thanks

Diff b/w msg mapping and interface mapping

hi
i have some doubt's:
1. diff b/w msg mapping and interface mapping
2. What is product in SLD? usually who creates the product,technical,business system??
thx in advance..

hI Smartsoft General User ,
The following r excellent websites on mapping which differentiate msg mapping and interface mapping in detail:
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
How to Use ABAP Mapping in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
These r excellent websites in SLD:
How ToHandle the SLD for SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
How ToHandle Caches in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
http://www.sap-press.de/download/dateien/751/sap_press_exchange_infra_engl.pdf
cheers!
gyanaraj
****Pls reward points if u find this helpful

Problem with context mapping and data flow in a FPM application

Hi All,
I am trying to develop an ESS application using FPM. For the same, the requirement is to see the history of an employee in the second view.
The first view has got just the overview information and the second one has got the detail. So, the records or the fields are the same on both the views.
As per the FPM guidelines, the Model is residing in the Fc component and the respective Vc components are using the model data accordingly.
I am executing the model in the Fc component calling the executable method in the interfaceController of the first view and then trying to display the output data of the BAPI in the first view which provides the overview information.This is working fine.
But when i am trying to map the same output node to the Table UI for the second view, the record size is coming zero and thus no information is available.
For the above issue, I am again executing the RFC in the InterfaceController of the second view to populate the records, which is incorrect as it is already executed and the data is available for the first view.
I request you to let me know the correct approach to Context mapping and data flow when using FPM-roadmap. Is their any standard method or approach available to deal with such requirements? Please let me know.
Thanks in advance.
Regards
DK

Hi Idhaya,
I model node is available in Fc and the Fc interface controller is being used in the first Vc and the second Vc.
So the idea is, as the executable method is generated in the Fc, so i have created a custom method to call the executable method in Fc, where the input parameter is getting passed and this custom method is finally getting called is the first Vc.
So , now my first Vc is ready to call the custom method in Fc and execute the RFC. Once the RFC is executed, the nodes in the Fc should get populated which is the ideal case.
And as the Fc is used as a component in the second Vc, the same node is available to the UI elements.
But, when I check the record size for the output node, it is always zero, for the second Vc.
Regards
DK

Multi-Message-split with ABAP mapping and adapter specific attributes

Hi all,
With ABAP-Mapping I split 1 message to n messages.
So many files are generated in file-Adapter.
Everything fine.
But now I want the file names different using adapter specific attributes.
It is not possible to use variable substitution and write the file name in payload because of receiver restrictions.
I tried this with following similar coding in ABAP-Mapping:
data: lt_records TYPE MPP_DYNAMIC_TAB.
 Loop.
 l_file_name = "payload-Inbound"-information
 ls_record-namespace = 'http://sap.com/xi/XI/System/File'.
 ls_record-name = 'FileName'.
 ls_record-value = l_file_name. "l_file_name comes from inbound-payload
 append ls_record to lt_records.
 Endloop.
CALL METHOD dynamic_configuration->set_all_records
 EXPORTING
 records = lt_records.
If I start the interface I see in the monitoring the dynamic configuration with many entries for file-name in the the SOAP-Header mapping of the request message (following extract):
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPAADDRESS.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPABROKERROLE.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPACOMPANYSEGMENT.XML</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">BPACUSTOMERROLE.XML</SAP:Record>
The result is that all files have the same file name (last entry in dynamic configuration).
Is it possible to write the adapter specific configuration in ABAP-mapping for every single result message??
Thank you for your help,
Florian

Hi Florian,
I've a different idea...I dont think its a "right solution" but just another work around..it involves a BPM...
In your ABAP mapping..set the dynamic config with as many variables as number of different messages...i.e. use the variables like 'FileName1', 'FileName2'...'FileName6' instead of 'FileName'. But use the same namespace 'http://sap.com/xi/XI/System/File'
Call the above mapping in a BPM and capture the individual messages and set the attribute 'FileName' from the values of 'FileName1' to 'FileName6' accordingly using Message Mapping and then send the message using the 'Send' step.
before you try this, try using the variable names 'FileName1' ...'FileName6' in the receiver adapters...enable the ASMS. I know we need to select which variables from the dynamic config to be used by the adapter by specifically selecting 'FileName', 'Directory' etc...but just give it a try and see if it works..
Or..instead of using a BPM..you can combine Henrique's idea...use Adapter module to set the value for 'FileName' from variables 'FileName1'...'FileName6' accordingly.
hope I'm clear..lemme know if you have any questions..
cheers
praveen

Mapping and context problem

Hi i am not being able to perform this mapping, the scenario is like this:
i need to create one LINE in the output for each E1PLOGI in the input when FLAG3 = 'S'
also as i don't understand completely the context theory i cant figure out in witch context to set the fields
My context is set like this
FLAG3 -> context = E1PLOGI
My logic is createif( FLAG3 = 'S' ) -> LINE
My xml test file have:
one E1PLOGI node without E1P0000
one E1PLOGI with E1P0000 node where FLAG3 = 'N'
one E1PLOGI completely OK
The result is that not even one LINE its created.
If only put one line ok it works ok, but if one line doesnt have an E1P0000 node or if FLAG3='S' then the next OK input lines it wont come out.
plase heeelp!
IN STRUCTURE
<Z_HRMD_A>
 <IDOC BEGIN="1">
 <EDI_DC40 SEGMENT="1">
 <CREDAT>20080731</CREDAT>
 </EDI_DC40>
 <E1PLOGI SEGMENT="1">
 <E1PITYP SEGMENT="1">
 <E1P0000 SEGMENT="1">
 <FLAG3>S</FLAG3>
 </E1P0000>
 </E1PITYP>
 </E1PLOGI>
 </IDOC>
</Z_HRMD_A>
Z_HRMD_A 1..1
IDOC 1..1
EDI_DC40 1..1
CREDAT 0..1
E1PLOGI 1..UNBOUNDED
E1PITYP 0..UNBOUNDED
E1P0000 0..UNBOUNDED
FLAG3 0..1
OUT STRUCTURE
<FILE_X>
 <LINE>
 <FIELD_1>
 <FIELD_2>
 <FIELD_3>
 <FIELD_4>
 </LINE>
</FILE_X>
FILE_X 1..1
LINE 0..UNBOUNDED
FIELD_X 0..1
Edited by: Mariano Billinghurst on Aug 4, 2008 6:05 PM
Edited by: Mariano Billinghurst on Aug 4, 2008 6:12 PM

Here it is the mapping and the display of the queues in each step.
Mi test xml has
1-one E1EPILOGI without EP0000
2-one E1EPILOGI OK
3-one E1EPILOGI with FLAG3 = N
4-one E1EPILOGI OK
http://img297.imageshack.us/img297/3615/mappingandqueueswi0.jpg
beena with your solution it was creating two lines , one with 1 and one with 3.
Kumar i think with your solution i am much closer, but still doesnt work ok. Could you explain me why at the end of the queres everything says "supress"?
Regards.
Mariano.

Invalid tag generated in result XML file, xslt mapping done using MAPFORCE

HI
My requirement is File to File using xslt mapping
I have done a very simple XSLT mapping, but through MAPFORCE tool
Here are the steps, I followed:
1. Supplied source xsd and xml file to MAPFORCE
2. Supplied target xsd file
3. mapped it as required
4. tested by supplying a sample xml file by clicking OUTPUT button, which displays perfect XML structure
5. Clicked XSLT button and copied and created a new file with extension .xsl file
6. Zipped the above xsl file
7. imported into IR imported archives folder
8. Selected the above xslt mapping in my Interface mapping.
9. Now tested my Interface Mapping by supplying sample some data for the source structure.
Now I got the error or warning "XML not well-formed" and got the successfull completion message window for my mapping when I proceed.
Now when I clicked xml source button for the target structure, It displays the invalid tag and starting with "#default"
So If I removed this particular tag at the first and last lines, it becomes a valid xml structure and able to see properly in my internet explorer
Here is the result I am getting:
<?xml version="1.0" encoding="UTF-8"?>
<#default:MT_Student_Result xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:xsltMappingScenarios C:/DOCUME~1/Satya/Desktop/MT_Student_Result.xsd">
<Data>
 <Name>Khan Raj</Name>
 <Marks>
 <Total_Marks>166</Total_Marks>
 </Marks>
</Data>
</#default:MT_Student_Result>
When I tested through MAPFORCE it generates absolutely valid XML structure when I clicked OUTPUT button on MAPFORCE, but not when I used the xslt mapping through my interface mapping.
What is the error I am making or any step missing?
Please help me!
Edited by: Shilpa Shetty on Oct 9, 2008 4:17 AM
Edited by: Shilpa Shetty on Oct 9, 2008 5:58 AM
Edited by: Chris Rock on Oct 9, 2008 6:06 AM

For some reason when I use MapForce tool to generate my xslt mapping source, it is generating the following statement in the xsl file.
 <xsl:namespace-alias stylesheet-prefix="n" result-prefix="#default"/>
So at the root element of XML file, it is replacing the character n with '#default' for some reason, I don;t know the purpose of this.
As you suggested, I changed the name space, still I experienced same problem.
It is now resolved after removing the above xsl statement from the xsl file before creating/uploading the relevant zip file into archives folder.
It works fine now. Thanks for the clue.

Need help with XML Compatibility between CS3 and CS4

I'm not a Dreamweaver guru but I am hoping someone will recognize my issue and be able to provide meaningful feedback.
Background:
A developer buddy and I are working together to create a new home page for an online retailer that utilizes flash banners. We're using XML to update the content of the banners. My buddy is creating the XML file and sending it to me to populate with content (i.e. descriptions, images, image paths, etc.). He is creating the XML file in CS3 and I am editing in CS4. Here's the issue: Whenever he uploads the populated XML file to the server the banners are displayed correctly. If I take the same file and upload it without editing, it works great. However, if I open the file, edit and resave before uploading to the web server, the the banners all have extra spaces between each line of content - almost as if it were double spaced. If you look at the code, the code looks fine. In fact, the code looks exactly like it did when my buddy sent the file to me. I believe we have isolated the problem to something weird with my installation of DW. I have downloaded and installed any and all updates. Oh yeah he's using a MAC version and I am using the PC version of DW.
Has anyone seen anything like this before???
Help...

Thank you for your response.
The code is listed below and to tell you the truth the following code is both good and bad. As I mentioned before, if my buddy sends me this xml file and I upload it to the server, it works fine. If I open the file and immediately save it without making any changes then upload it, I experience the previously described promblem. It's very strange. The code in both files is identical.
To get a clearer picture of what I am describing, go to http://www.everythingministry.com/beta3.htm. The book descriptions appear correctly under the "New and Recommended" tab. However, whenever I edit any one of the six xml files that control the content for each of these tabs it ends up looking like what you currently see under the "New Music" tab. I have actually tried to update from 2 different machines running DW CS4.
Below are the xml files for the two tabs I referenced in the paragraph above:
ts_new.xml
<items>
<config
Milliseconds="5000"
Distance="3"
BorderColor="0xffffff"
TargetLink="_top"
TextYPosition="200"
MaxDisplayContent="6"
ContentWidth="148"
ContentHeight="300"
TransitionSpeed="0.8"
TransitionType="0"
ShowMouseOver="0"
ShowBorder="1"
ShowGlass="1"
/>
 <content>
 <image>images/crazylove.jpg</image>
 <description><![CDATA[Crazy Love
by Chan Francis
Price: $11.99
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
 <link>http://www.everythingministry.com/crazylove.aspx</link>
</content>
<content>
 <image>images/underthesheets.jpg</image>
 <description><![CDATA[Under the Sheets
by Dr. Kevin Leman
Price: $9.99
You Save: 29 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
 <link>http://www.everythingministry.com/underthesheetsthesecretstohotsexinyourmarriage.aspx</link>
</content>
<content>
 <image>images/outliveyourlife.jpg</image>
 <description><![CDATA[Outlive Your Life
by Max Lucado
Price: $19.99
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
 <link>http://www.everythingministry.com/outliveyourlifebymaxlucadohardcover.aspx</link>
</content>
<content>
 <image>images/lovedare.jpg</image>
 <description><![CDATA[Love Dare Day By Day
Wedding Edition
Price: $16.79
You Save: 27 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
 <link>http://www.everythingministry.com/lovedaredaybyday-weddingedition.aspx</link>
</content>
 <content>
 <image>images/lifeinterrupted.jpg</image>
 <description><![CDATA[Life Interrupted
by Priscilla Shirer
Price: $11.99
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
 <link>http://www.everythingministry.com/lifeinterruptednavigatingtheunexpected.aspx</link>
</content>
<content>
 <image>images/faithfulfasting.jpg</image>
 <description><![CDATA[Faithful Fasting
by Errica L. Williams
Price: $8.79
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
 <link>http://www.everythingministry.com/faithfulfasting.aspx</link>
</content>
<content>
 <image>images/whencouples.jpg</image>
 <description><![CDATA[When Couples Walk Together
Price: $9.59
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
 <link>http://www.everythingministry.com/whencoupleswalktogetherjan2011-paperback.aspx</link>
</content>
</items>
ts_music.xml
<items>
<config
Milliseconds="5000"
Distance="3"
BorderColor="0xffffff"
TargetLink="_top"
TextYPosition="200"
MaxDisplayContent="6"
ContentWidth="148"
ContentHeight="300"
TransitionSpeed="0.8"
TransitionType="0"
ShowMouseOver="0"
ShowBorder="1"
ShowGlass="1"
/>
 <content>
 <image>images/untilthewholeworldhearscd.jpg</image>
 <description><![CDATA[Until the Whole
World Hears
Price: $12.76
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
 <link>http://www.everythingministry.com/untilthewholeworldhearscd.aspx</link>
</content>
<content>
 <image>images/move.jpg</image>
 <description><![CDATA[Move
by Thirda Day
Price: $11.19
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
 <link>http://www.everythingministry.com/move.aspx</link>
</content>
<content>
 <image>images/andifourgodisforus.jpg</image>
 <description><![CDATA[And If Our God
Is For Us
Price: $11.19
You Save: 20 %
<img src="images/addtocart.jpg" width="146" height="17">]]></description>
 <link>http://www.everythingministry.com/andifourgodisforuscd.aspx</link>
</content>
</items>

Java mapping and no content conversion

Hi all,
I have a file to idoc scenario. The file is in flat idoc format and I've made my own java mapping that gets the flat file and converts it to idoc xml format.
I don't use content conversion in the sender file adapter because I don't wan't the file to be converted to xml before the java mapping processes it. But with this configuration my scenario fails in the interface determination step, as it doesn't find an xml to apply the java mapping.
Is there a way to make it work as I want? (with my java mapping and not applying content conversion?) If not, is there a way to put all the file in a single xml tag using content conversion?
I mean something like this:
<FILE>
</FILE>
This way it would be easy for my java mapping to remove the tags and work with the flat file as it does now.
Thanks in advance.

Thanks Stephan for your answer.
In fact I have the defined that interface, as well as a dummy data type and message type that uses it. I still get the error though. My guess is that, as I don't use content conversion in file adapter (message protocol is file) the outbound message is in fact not in xml format, and it cannot identify it in interface determination. That's my guess but perhaps I'm wrong?
This is the error I'm getting:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="IF_DETERMINATION">CX_ID_PLSRV</SAP:Code>
<SAP:P1>No interface determination found for outbound interface http://********.****/EDELIVERY.SI_OUT_A_0596_RECADV: Error while determining root tag of XML: BOM / charset detection failed</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the inbound interface: No interface determination found for outbound interface http://********.****/EDELIVERY.SI_OUT_A_0596_RECADV: Error while determining root tag of XML: BOM / charset detection failed No interface determination found for outbound interface http://********.****/EDELIVERY.SI_OUT_A_0596_RECADV: Error while determining root tag of XML: BOM / charset detection failed Error while determining root tag of XML: BOM / charset detection failed Error while parsing an XML stream: 'BOM / charset detection failed'.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any idea?

Java Mapping and Graphical Mapping

Hi All,
Could any one clarifies the situation where we need to write in a same interface ,
Both Java mapping and Graphical mapping.
Regards,
venu.

Hi,
Here is a scenario where you might need to use both graphical and user defined functions.
source: <fname> <lname> <filename>
target: <name> <filetype>
Suppose, you need to concatenate fname and lname into the target <name> tag, you could use the normal graphical mapping using the concat function.
<fname>\
concat <name>
<lname>/
next, if we need to extract only the filetype from the filename, for example, if we have filename.txt... and we want only the value .txt, we need to write a user defined function which would achieve this for u, since there are no inbuilt function which can solve this for you in graphical mapping.
Further XSLT mapping comes into picture when we need to create the entire target xml structure. Again, graphical mapping would not be useful here.
Regards,
Smitha.

Source of xslt mapping and XSD/ XMT target structures for standard Idocs

Hi,
I am working on R/3 - XI - ICH scenario. I need xslt mapping and XSD/ XML target structures for standard IDoc like PROACT01,DELFOR01, DELVRY03. I tried to search it on marketplace but couldn't find it there. As per configuration document, these things are shipped with XI mapping content in live cache CD. But I don't have this CD with me. Can anybody tell me the source for these target structures and mapping program. ( Please share marketplace, site link or send me across the mail [email protected])
Thank you in advance.
Anand More.

Anand the other option is to import the corresponding idocs into your integration repository and then you can view the generated XSD there.
As regards XSLT mapping, you need to basically first identify as to what form you want to transform your source idoc into.
For some help on XSLT mapping check the following threads,
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/topusers.jspa%3FforumID%3D44
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode1-6&contenttype=url&content=https://Process Integration (PI) & SOA Middleware
Also have a look at my code samples,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/generic xslt mapping in sap xi, part i.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9692eb84-0601-0010-5ca0-923b4fb8674a
cheers
Sameer

XSLT Mapping and Namespace Issues

I have been reading through similar threads on this topic, but have not found the right combination for my problem. I am doing an XSLT map and it works fine in Stylus Studio. When I take it to PI, I get a "Prefix 'ns0' is not mapped to a namespace" error. I have a namespace that is within the XSD files I received from my partner (http://www.ups.com/XMLSchema/EBR/Billing/v1). I also have the namespace I made in PI for the source (http://graybar.com/upsbilling/) and a different namespace in PI for the destination (http://graybar.com/cold/invoice/).
XSLT:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://www.ups.com/XMLSchema/EBR/Billing/v1" xmlns:ns1="http://graybar.com/cold/invoice/">
<xsl:template match="/">
<ns1:ColdInvoiceData>
<Header>
<RecordID>HDR</RecordID>
<InvoiceDate>
<xsl:value-of select="ns0:UPS_EBR_BILL/ns0:InvoiceDetails/ns0:Invoice/ns0:InvoiceDateCCYYMMDD"/>
</InvoiceDate>
Source XML
<?xml version="1.0" encoding="ISO-8859-1" ?>
<UPS_EBR_BILL xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.ups.com/XMLSchema/EBR/Billing/v1" xsi:schemaLocation="http://www.ups.com/XMLSchema/EBR/Billing/v1 Billing_XML_Schema.xsd">
<XMLBillFileVersion>1.0.1</XMLBillFileVersion>
<Recipient>
When I change the XSLT namespace from http://www.ups.com/XMLSchema/EBR/Billing/v1 to http://graybar.com/upsbilling/, the TransfromerException in PI goes away, but none of my referenced mappings work either (just my text hardcodes).
Can someone tell me why this works in Stylus Studio, but not in PI? Do I have too many namespaces?
Message was edited by:
Keith Wendel (to uncomment xsl:stylesheet line)

> <ns1:ColdInvoiceData xmlns:ns1="http://graybar.com/cold/invoice/">
This change did not affect anything. Still works in Stylus Studio though.
Did you mean to show any changes at the <xsl:value-of select> line? I did not notice anything there.
Can anyone explain what "not mapped to a namespace" means? I have the declaration of ns0 at the top, so I don't see what else needs to be mapped. Do I have to have my PI namespace where I store the partner's XSDs set as "http://www.ups.com/XMLSchema..." (partner's namespace)?

XML Populating Tree Map and JMenu

Similar Messages

Maybe you are looking for