XML pulishers in JDEdwards
Can anybody help me out regarding xml publishers in JDEdwards
from where I should strat.I have done xml publishers in Oracle apps.But in case of Jdedwrads how shall i start.
I have found the output of JDE reports in XML by OSA Interface option but is it the right way of getting the data as i was unable to place the tag from that xml output while creating the RTF template
Please revert me back if you have the answer.It is very urgent.
Thanks in advance
Were you able to get any help with this? I am in the same position - being asked to complete XML Checks in JDE because I know it in EBS.
thanks - Malinda
[email protected]
Similar Messages
-
XML Payload does not have namespace and prefix.
Hello
I have created a consumer business service which will be called from JDEdwards EOne, pulls data from database and send it to Fusion Middleware.
SO, I have created proxy using JAX-WS option. And suggested in oracle doc, I created proxy outside OMW and then copied it to my project. XML payload is getting generated without namespace and prefix. After some research, I modified package-info.java. Now, I am able to send the payload and if test it locally from Jdeveloper and take xml output using marshaller I can see it has namespace and prefix as well. BUt, when I run this from server it does not have namespace and prefix.
Please help.
Thanks
TKHi Naresh,
The "rejectedMessage" property is for 10G, I am not 100% sure about its implementation in 11G.
In 10G the faulted XML file moves to this location "Oracle_Home\bpel\domains\domain_name\jca\project_directory\rejectedMessages".
This property is used to move the files which are not valid XML or which are not schema compliant. For DB polling I don't think this property is used.
-Yatan -
XML without namespace and prefix, modified package-info.java, JAX-WS option
Hello
I have created a consumer business service which will be called from JDEdwards EOne, pulls data from database and send it to Fusion Middleware.
SO, I have created proxy using JAX-WS option. And suggested in oracle doc, I created proxy outside OMW and then copied it to my project. XML payload is getting generated without namespace and prefix. After some research, I modified package-info.java. Now, I am able to send the payload and if test it locally from Jdeveloper and take xml output using marshaller I can see it has namespace and prefix as well. BUt, when I run this from server it does not have namespace and prefix.
Please help.
Thanks
TKJust to clerify,
The common complex types are StatusInfo, IdcProperty and IdcPropertyList. I ahve 3 more WSDL's with the exact same entires for those 3. -
I Know that for using XML Interop I have to produce an XML file like that :
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<jdeRequest comment="" environment="PY812" pwd="xxxx" role="*ALL" session="" sessionidle="" type="callmethod" user="BUFFETAUD">
<callMethod app="" name="LaunchBatchApplication">
<returnCode code="0"/>
<params>
<param name="szReport">R0006P</param>
<param name="szVersionJDE">XJDE0001</param>
<param name="cSynch">0</param>
<param name="cPrintPreview">0</param>
<param name="szDataSourceOverride"/>
<param name="mnServerJobNumber">0</param>
<param name="cReturn"/>
<param name="cJDELogging">0</param>
<param name="cTracing">0</param>
<param name="cUBELoggingLevel">1</param>
<param name="szJobQueue">QBATCH</param>
</params>
</callMethod>
</jdeRequest>
We are under JDE 8.12 Tools 8.98.2.3 and an AS400 V6R1.
We are now using Oracle Data Ingrator 11G.
I would like to know how and where to send using ODI this XML to make JDE execute my call?This is from Oracle.
Please mark the answer as correct if you think it's right.
JXMLTool (EnterpriseOne 8.98)
Introduction:
The JXMLTool is a GUI tool developed by Global Support Services to submit XML requests to ERP enterprise servers. The tool can be used to verify the integrity of the ERP services (kernel configuration, BSFN processing, among others) when testing inbound integrations from XPI and/or other third party systems to ERP. This document contains instructions on how to install and configure the tool.
Installation and Configuration:
1) Verify that a supported Java Development Kit (JDK) is installed in the workstation to be used in the test (for example, verify that JDK 1.4.2 is installed).
Note: It is recommended that the workstation also have an EnterpriseOne 8.12 full client package installed.
2) Create a new directory in the workstation (for example, C:\JXMLTool).
3) Copy the following files from the Deployment server to the directory created in step 2:
e812\system\classes\Base_JAR.jar
e812\system\classes\JdeNet_JAR.jar
e812\system\classes\System_JAR.jar
e812\system\classes\log4j.jar
e812\system\classes\xerces.jar
e812\system\classes\xalan.jar
e812\system\classes\ManagementAgent_JAR.jar
e812\system\classes\jmxri.jar
e812\system\classes\commons-httpclient-3.0.jar
e812\system\classes\commons-logging.jar
e812\system\classes\ xmlparserv2.jar
e812\system\classes\ jmxremote_optional.jar
e812\system\Classes\samples\jdeinterop.ini.templ
e812\system\Classes\samples\jdelog.properties
Note: If you have multiple-foundation implemented in the system, make sure the files you are copying match the service pack level installed in the enterprise server.
4) Rename jdeinterop.ini.templ to jdeinterop.ini. Modify the jdeinterop.ini file copied in step 3 to reflect the correct enterprise server name:
a) Ensure that parameters glossaryTextServer in [SERVER] section, serviceNameConnect in [JDENET] section, and enterpriseServer, port in [INTEROP] section specify the correct enterprise server name and JDENET port number).
b) Configure the value of Repository under [INTEROP] section such that it points to the directory created in step 2 (for example, “Repository= C:\JXMLTool”).
c) Ensure that parameter SecurityServer in [SECURITY] section specify the correct security server.
d) Configure OCMEnabled to “false” in [OCM] section.
e) Add the parameter netTrace to [JDENET] section and configure its value as “1” (for example, “netTrace=1”)
5) Rename jdelog.properties.templ to jdelog.properties. Modify the jdelog.properties file to reflect the characteristics of the machine:
a) Ensure that jdelog.handler.JDELOG.File points to directory created in step 2 (for example, jdelog.handler.JDELOG.File=C:/JXMLTool/jderoot.log).
b) Ensure that jdelog.handler.JASLOG.File points to directory created in step 2 (for example, jdelog.handler.JASLOG.File=C:/JXMLTool/jas.log).
c) Remove comment marks from parameters jdelog.Debug, jdelog.handler.jasdebug, jdelog.handler.jasdebug.File, and jdelog.handler.jasdebug.Level.
c) Ensure that jdelog.handler.jasdebug.File points to directory created in step 2 (for example, jdelog.handler.jasdebug.File=C:/JXMLTool/jasdebug.log).
6) Create a new text file using the text editor of your choice (for example, Notepad).
7)Paste the following text to the new document:
@echo off
REM Edit this file to the locations for Java and EnterpriseOne
REM JDK root directory
set JAVA_HOME=C:\j2sdk1.4.2_12
set PATH=C:\j2sdk1.4.2_12\bin
REM EnterpriseOne Windows client install path
set OneWorld_HOME=C:\e812
REM This directory
set EXAMPLES=C:\Interop\JXMLTool
REM Set the CLASSPATH environment variable.
REM The following are libraries that are needed for Connector samples:
set CLASSPATH=Base_JAR.jar
set CLASSPATH=%CLASSPATH%;C:\Interop\JXMLTool\
set CLASSPATH=%CLASSPATH%;C:\Interop\JXMLTool\JXMLTool.class
set CLASSPATH=%CLASSPATH%;JdeNet_JAR.jar
set CLASSPATH=%CLASSPATH%;System_JAR.jar
set CLASSPATH=%CLASSPATH%;log4j.jar
set CLASSPATH=%CLASSPATH%;xerces.jar
set CLASSPATH=%CLASSPATH%;xalan.jar
set CLASSPATH=%CLASSPATH%;ManagementAgent_JAR.jar
set CLASSPATH=%CLASSPATH%;jmxri.jar
set CLASSPATH=%CLASSPATH%;commons-httpclient-3.0.jar
set CLASSPATH=%CLASSPATH%;commons-logging.jar
set CLASSPATH=%CLASSPATH%;xmlparserv2.jar
set CLASSPATH=%CLASSPATH%;jmxremote_optional.jar
set CLASSPATH=%CLASSPATH%;%OneWorld_HOME%\system\classes\
a) Ensure that "set JAVA_HOME" command sets the variable with correct path to JDK directory (for example, "set JAVA_HOME=c:\jdk142").
b) Configure value of OneWorld_HOME such that it points to the directory where OneWorld® is installed (for example, “set OneWorld_HOME=C:\e812”).
c) Ensure that "set EXAMPLES" command sets the variable with the correct path to directory created in step 2 (for example, "set EXAMPLES=C:\JXMLTool").
d) Configure value of JDEINTEROPINI such that it points to the jdeinterop.ini file you copied in step 3 (for example,
“set JDEINTEROPINI=%EXAMPLES%\jdeinterop.ini”).
e) Append the path of the bin directory of the JDK to the PATH variable. For example, add the following line:
“set PATH=%JAVA_HOME%\bin”
8) Save the file as setenv.bat in the directory created in step 2 (for example, C:\JXMLTool\setEnv.bat).
9) Create a new text file using the text editor of your choice (for example, Notepad).
10) Paste the following text to the new document:
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import java.util.GregorianCalendar;
import java.util.Date;
import javax.swing.JOptionPane;
import javax.swing.JFrame;
import com.jdedwards.system.xml.XMLRequest;
import com.jdedwards.system.net.JdeNetTimeoutException;
import com.jdedwards.system.net.JdeNetConnectFailedException;
// Application: JXMLTool
// Description: Java tool that submits XML requests to OneWorld® enterprise Servers
// Author: Luis A. Santillo
public class JXMLTool extends JFrame implements ActionListener {
Panel xmlPanel;
Label ServerNameLabel;
Label PortNumberLabel;
TextField PortNumberField;
TextField ServerNameField;
TextArea RequestArea;
TextArea ReplyArea;
Button submitButton;
String directory;
String owServerName;
String ReplyString;
int owPortNumber;
MenuBar mb = new MenuBar();
Menu fileMenu = new Menu("File");
Menu helpMenu = new Menu("Help");
MenuItem openMenuItem = new MenuItem("Open");
MenuItem exitMenuItem = new MenuItem("Exit");
MenuItem helpMenuItem = new MenuItem("About");
public static void main(String args[]) {
JXMLTool jxmltool = new JXMLTool();
jxmltool.init();
public void init () {
xmlPanel = createXMLPanel();
this.setSize(640, 480);
this.setResizable(true);
this.getContentPane().add(xmlPanel, BorderLayout.CENTER);
this.setVisible(true);
openMenuItem.addActionListener(this);
fileMenu.add(openMenuItem);
fileMenu.add(new MenuItem("-"));
exitMenuItem.addActionListener(this);
fileMenu.add(exitMenuItem);
helpMenu.add(helpMenuItem);
mb.add(fileMenu);
mb.add(helpMenu);
this.setMenuBar(mb);
submitButton.addActionListener(this);
directory = System.getProperty("user.dir");
private Panel createXMLPanel()
GridBagLayout gridbag = new GridBagLayout();
GridBagConstraints constraints = new GridBagConstraints();
xmlPanel = new Panel();
xmlPanel.setLayout(gridbag);
buildConstraints(constraints, 0, 0, 1, 1, 10, 5);
constraints.fill = GridBagConstraints.NONE;
ServerNameLabel = new Label("OneWorld® Server Name", Label.LEFT);
gridbag.setConstraints(ServerNameLabel, constraints);
xmlPanel.add(ServerNameLabel);
buildConstraints(constraints, 1, 0, 1, 1, 40, 0);
constraints.fill = GridBagConstraints.NONE;
ServerNameField = new TextField("", 20);
gridbag.setConstraints(ServerNameField, constraints);
xmlPanel.add(ServerNameField);
buildConstraints(constraints, 2, 0, 1, 1, 10, 0);
constraints.fill = GridBagConstraints.NONE;
PortNumberLabel = new Label("Port Number", Label.LEFT);
gridbag.setConstraints(PortNumberLabel, constraints);
xmlPanel.add(PortNumberLabel);
buildConstraints(constraints, 3, 0, 1, 1, 40, 0);
constraints.fill = GridBagConstraints.NONE;
PortNumberField = new TextField("", 20);
gridbag.setConstraints(PortNumberField, constraints);
xmlPanel.add(PortNumberField);
buildConstraints(constraints, 0, 1, 4, 1, 0, 40);
constraints.fill = GridBagConstraints.BOTH;
RequestArea = new TextArea("", 10, 80);
gridbag.setConstraints(RequestArea, constraints);
xmlPanel.add(RequestArea);
buildConstraints(constraints, 0, 2, 4, 1, 0, 5);
constraints.fill = GridBagConstraints.NONE;
submitButton = new Button("Submit");
gridbag.setConstraints(submitButton, constraints);
xmlPanel.add(submitButton);
buildConstraints(constraints, 0, 3, 4, 1, 0, 40);
constraints.fill = GridBagConstraints.BOTH;
ReplyArea = new TextArea("", 10, 80);
ReplyArea.setBackground(Color.gray);
gridbag.setConstraints(ReplyArea, constraints);
xmlPanel.add(ReplyArea);
return xmlPanel;
void buildConstraints(GridBagConstraints gbc, int gx, int gy, int gw, int gh, int wx, int wy) {
gbc.gridx = gx;
gbc.gridy = gy;
gbc.gridwidth = gw;
gbc.gridheight = gh;
gbc.weightx = wx;
gbc.weighty = wy;
public void actionPerformed(ActionEvent e) {
if (e.getSource() instanceof MenuItem) {
String label = ((MenuItem)e.getSource()).getLabel();
if (label.equals("File"));
if (label.equals("Open")) {
FileDialog f = new FileDialog(this, "Open File", FileDialog.LOAD);
f.setDirectory(directory);
f.show();
directory = f.getDirectory();
setFile(directory, f.getFile());
f.dispose();
if (label.equals("Exit"))
System.exit(0);
if (label.equals("About"));
if (e.getSource() instanceof Button) {
if (ServerNameField.getText().equals(""))
ReplyArea.setText("Error: server name is either null or empty!\nPlease enter new server name.\n");
else {
if (PortNumberField.getText().equals(""))
ReplyArea.setText("Error: port number is either null or empty!\nPlease enter new port number.\n");
else {
owServerName = ServerNameField.getText();
try {
owPortNumber = Integer.parseInt(PortNumberField.getText());
ReplyString = submitXMLRequest(RequestArea.getText());
ReplyArea.setText(ReplyArea.getText() + "\n\n" + ReplyString);
catch (NumberFormatException nfex) {
ReplyArea.setText("Error: unable to format port number!\n");
ReplyArea.setText(ReplyArea.getText() + "Exception: " + nfex +"\nPlease enter new port number.\n");
public void setFile(String directory, String filename) {
if ((filename == null) || (filename.length() == 0)) return;
File f;
FileReader in = null;
try {
f = new File(directory, filename);
in = new FileReader(f);
int size = (int) f.length();
char[] data = new char[size];
int chars_read = 0;
while(chars_read < size)
chars_read += in.read(data, chars_read, size-chars_read);
RequestArea.setText(new String(data));
catch (IOException e) {
ReplyArea.setText(e.getClass().getName() + ": " + e.getMessage());
finally { try { if (in != null) in.close(); } catch (IOException e) {} }
public String submitXMLRequest(String xmlIn) {
GregorianCalendar gregCalendar = new GregorianCalendar();
String xmlOut = null;
Date currentDate;
try {
ReplyArea.setText(gregCalendar.getTime() + " New XML request.\n");
ReplyArea.setText(ReplyArea.getText() + gregCalendar.getTime() + " Creating XML request using text in area above.\n");
XMLRequest xml = new XMLRequest(owServerName, owPortNumber, xmlIn);
ReplyArea.setText(ReplyArea.getText() + gregCalendar.getTime() + " XML request submitted to " + owServerName + " using port number " + PortNumberField.getText() + ".\n");
ReplyArea.setText(ReplyArea.getText() + gregCalendar.getTime() + " Waiting for reply from " + owServerName + ".\n");
xmlOut = xml.execute();
catch (JdeNetTimeoutException toex) {
ReplyArea.setText(ReplyArea.getText() + "\nError: JDENet timed out!\n" + "Exception: " + toex +"\n\n");
catch (JdeNetConnectFailedException cfex) {
ReplyArea.setText(ReplyArea.getText() + "\nError: JDENet connect failed!\n" + "Exception: " + cfex +"\n\n");
catch (java.io.IOException ioex) {
ReplyArea.setText(ReplyArea.getText() + "\nError: IO Exception!\n" + "Exception: " + ioex +"\n\n");
currentDate = new Date ();
gregCalendar.setTime(currentDate);
ReplyArea.setText(ReplyArea.getText() + gregCalendar.getTime() + " Reply received from " + owServerName + ".\n");
return xmlOut;
public void processWindowEvent(WindowEvent e) {
if (e.getID() == Event.WINDOW_DESTROY) {
System.exit(0);
11) Save the file as JXMLTool.java in the directory created in step 2 (for example, C:\JXMLTool\JXMLTool.java).
12) Create a new text file using the text editor of your choice (for example, Notepad).
13) Paste the following text to the new document:
@echo off
call setenv.bat
javac JXMLTool.java
14) Save the file as build.bat in the directory created in step 2 (for example, C:\JXMLTool\build.bat).
15) Build the JXMLTool Java application:
a) Open a new MS-DOS Command Prompt window.
b) Change the current directory to the directory created in step 2.
c) Call the build.bat script to compile the Java code and create the JXMLTool Java class.
d) Verify that JXMLTool.class exists in the directory created in step 2 (for example,
“C:\JXMLTool\JXMLTool.class”).
16) Create a new text file using the text editor of your choice (for example, Notepad).
17) Paste the following text to the new document:
@echo off
call setenv.bat
java -Dconfig_file=jdeinterop.ini JXMLTool
18) Save the file as run.bat in the directory created in step 2 (for example, C:\JXMLTool\run.bat).
Usage:
1) Open a new MS-DOS Command Prompt window.
2) Change the current directory to the directory created in step 2.
3) Call the run.bat script to execute the JXMLTool Java application.
5) In the Java application, enter enterprise server name and port number in appropriate text fields.
6) Enter the following text in the upper panel:
<?xml version='1.0' ?>
<jdeRequest type='callmethod' user='JDE' pwd='JDE' environment='JPD812' session=''>
<callMethod name='GetEffectiveAddress' app='JXMLTool'>
<params>
<param name='mnAddressNumber'>1001</param>
</params>
</callMethod>
</jdeRequest>
7) Modify the XML information to reflect the characteristics of the system:
a) Replace user, password, and environment with correct values for your system.
b) If 1001 is not a valid AddressBook number, replace it with a valid AB number.
8) Click the button “Submit”.
9) Verify that an XML reply is received from enterprise server. The reply will be displayed in the lower panel.
Retrieving an XML Template for BSFN Request:
1) Repeat steps 1 through 9 in Usage, using the following text in step 6:
<?xml version='1.0' ?>
<jdeRequest type='callmethod' user='JDE' pwd='JDE' environment='JPD812'>
<callMethodTemplate name='GetEffectiveAddress' app='JXMLTool'/>
</jdeRequest>
2) Highlight the text in the lower panel, starting with tag “<?xml version='1.0' ?>”.
3) Press Control (Ctrl) and C keys simultaneously.
4) Open a new text document using the text editor of your choice.
5) Paste contents into new text document.
6) Remove tag “<returnCode=’0’/>”.
7) Save text document with extension .xml. -
Hi All,
Client is using JDEdwards erp for the past 7 years,now he wants to move to sap bi.My queries are,
1.How can we connect jdedwards with sap bi,if so what kind of extractors we have to use.
2. Client needs the line item wise data into bi, is it possible?
pls help me,
Regards,
YunusWhile installing and configuring the JDEdwards adapter provided by Iway, we found that there is no central information provider where we could get all the steps for installing, configuring the JDEdwards adapter and creating a scenario for calling a Business Function in JDEdwards system.
Through these blogs I intend to provide a step by step guide to anyone who wishes to configure JDEdwards adapter.
Think of integrating with an SAP system and you can directly have your IDOC and RFC interfaces imported into XI, but is it that simple in case of any third party ERP ?
The diagram below shows the process of importing rfc interfaces in XI.
Lets see in case of JDEdwards,
As we have RFCs and BAPI in sap, we have business functions in JDE. The Business functions in case of JDE are written in JDE specific language. There is a tool called as GenJava provided by JDEdwards itself, using which we can create a jar file of the business function. The output for GenJava produces fully functional Java objects based on the library you use to generate wrappers.
GenJava packages these objects in a single JAR file such as XXXInterop.jar or XXXXInteropDoc.jar, where XXXX is the name of function which we provide from the command line. For example the command can be as follows
GenJava /Cat 1 /UserID Devuser1 /Password Devuser1 /Environment DV811 CAEC.
Along with the adapter IWAY also provides a servlet application called as Application Explorer which creates xml schema definitions (XSD) for the generated java objects. Using the servlet u201Capplication exploreru201C, we can create request and response schemas (XSD) for that particular java function. Thus we get the XSD files for request and response which we can import in External definitions in Integration repository. Now that shows the advantage of being on open standards.
Steps for configuring and using the JDE adapter are as follows.
JDEdwards Adapter software installation.
Add JDE specific files to iwxijca_JDEdwards.sda.
Deploy the Adapter.
Registering the adapter in SLD.
Logging and Trace settings.
Deploying Application explorer.
Create request and response schemas for the Business function
Configuring a scenario in XI.
The next two blogs will cover all the eight steps in detail.
Here's the link for part two and three
part -II /people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii
part -III /people/yomeshp.sharma/blog/2006/05/31/integrating-jdedwards-system-with-xi-using-iway-adapter-part--iii -
We have a problem with our XML Quote report that cuts off the report at 26 pages when it should go to about 200 pages.
We have another report the Acknowledge Quote and it works fine.Finally we found the solution for this problem.
1. Open qotSCocPrint.jsp and add below line inside <SELECT id="qotOutFrmt" name="qotOutFrmt"> statement. This line should be added after "for" loop.
<OPTION value="EXCEL">Excel Format</option>
We can add as many options the XML Publisher supports.
2. Decompile oracle.apps.aso.print.webui.MainCO.class (Controller).
Change the below line
httpservletresponse.setContentType("application/pdf");
to
httpservletresponse.setContentType("application/"+quoteOutputFormat.toLowerCase());
Take a backup of the original file, compile the java in the same directory.
3. Decompile oracle.apps.aso.print.server.PrintQuoteAMImpl.class and change this line
Field field = class2.getDeclaredField("OUTPUT_TYPE_PDF");
to
String outputFormat="OUTPUT_TYPE"+as[12].trim();
Field field = class2.getDeclaredField(outputFormat);
Bounce Apache and generate the Quote output in desired format. -
Issue in Creation of XML file from ABAP data
Hi,
I need to create a XML file, but am not facing some issues in creation of XML file, the in the required format.
The required format is
-<Header1 1st field= u201CValueu201D 2nd field= u201CValueu201D>
- <Header2 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 10 fields>
<Header3 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
<Header4 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 4 fields/.>
<Header5 1st field= u201CValueu201D 2nd field= u201CValueu201Du2026u2026. Upto 6 fields/>
</Header2>
</Header1>
Iu2019m using the call transformation to convert ABAP data to XML file.
So please anybody can help how to define XML structure in transaction XSLT_TOOL.
And one more thing, here I need to put the condition to display the Header 3, Header 4, Header 5 values. If there is no record for a particular line item in header 3, 4 & 5, I donu2019t want to display full line items; this is only for Header 3, 4 & 5.
Please help me in this to get it resolved.Hello,
you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
Regards Otto -
Rendering xml-table into logical filename in SAP R/3
Hi,
I am trying to translate an xml-table with bytes into a logical filepath in SAP R3.
Do I have to use the method gui-download or shall I loop the internal xml-table?
When I tried to loop the xml-table into a structure, and then transfering the structure into the logical filename, I get problems with the line breaks in my xml-file. How do I get the lines to break exactly the same as I wrote them in my ABAP-code?
Edited by: Kristina Hellberg on Jan 10, 2008 4:24 PMI believe you posted in the wrong forum.
This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
Ludek -
Boa tarde,
Estou em um projeto de implementação e com a seguinte dúvida:
Requerimentos:
Tenho que enviar o XML assim que a Invoice+NF é gerada (VF01/VF04, etc).
Num segundo momento, após a aprovação do XML, eu poderei imprimir a DANFe.
Envio XML:
Sei que a função que mapeia o XML para a versão 2.0 é a J_1B_NF_MAP_TO_XML e a função que envia para o GRC ou outra mensageria (utilizaremos NeoGrid) é a J_1B_NFE_XML_OUT.
A pergunta é: como faço a chamada destas funções? Qual programa devo chamar? Em qual momento? É por customizing ou por uma exit no faturamento?
Obs.: entendo que estas funções já estão configuradas no monitor J1BNFE para solicitar o reenvio da nota, etc.
Impressão DANFe:
Em paralelo, na J1BJ vou ter que configurar somente o programa de impressão do DANFe (J_1BNFPR), correto? Pois assim quando eu gerar e processar o output da NAST ele irá fazer a impressão do documento, correto?
Caso não entendam as perguntas por favor me contestem que eu explico melhor.
Obrigado!
Felipe Brasil SimioniOlá, Fernando.
Por favor veja se pode nos ajudar.
Estamos tendo o mesmo problema com o envio do XML para a mensageria (não GRC).
Seguindo as parametrizações indicadas acima:
SPRO
Componentes válidos para várias aplicações
Funções gerais de aplicação
Nota Fiscal
Saída
Atribuir parametros de numeração e dxed impressão
O local de negócios está configurado como RFC CALL vazio (segue descrição abaixo):
"Execução RFC e atualização banco dados na mesma LUW (padrão)"
Porém, ao tentar enviar a nota fiscal (ex: J1B1N), ocorre um erro na SM58 e o XML não é enviado para o sistema de mensageria.
Analisando o programa SAPLJ_1B_NFE, no include LJ_1B_NFEF42, vemos que para mensagerias não GRC o programa chama a função J_1B_NFE_XML_OUT em background task, o que ocasiona o erro abaixo na SM58.
IF sy-subrc IS INITIAL.
non SAP messaging system "V1.10
if lv_xnfeactive is initial. "V1.10
Call function asych. when RFC connection available
gv_callmode can be switched in debbuging to call the RFC synchronous
do not reset gv_callmode direct after the RFC call
if gv_callmode is initial.
CALL FUNCTION 'J_1B_NFE_XML_OUT'
IN BACKGROUND TASK
DESTINATION lv_rfcdest
EXPORTING
xml_in = xmlh
xml_item_tab = xmli_tab
xml_batch = xmlb_tab
xml_ref = xmlr_tab
xml_dup = xmld_tab
xml_vol = xmlv_tab
xml_head_tab = xmlh_tab "V1.10
xml_imp = xml_import_tab "V1.10
xml_ext1 = xml_ext1_tab "V1.10
xml_ext2 = xml_ext2_tab "V1.10
xml_adi = xml_adi_tab "V2.00
xml_reb = xml_reb_tab "V2.00
xml_cane_dia = xml_cane_dia_tab "V2.00
xml_cane_ded = xml_cane_ded_tab. "V2.00
Erro da SM58:
RfcAbort: Cannot lock transaction
Nº mensagem SR053
Note que a chamada é feita de forma assincrona porque a variável gv_callmode está como initial, e que segundo o comentário da SAP, essa variável é usada somente para debug, sem qualquer parametrização que controle o modo de chamada.
Obs: se comentarmos a linha IN BACKGROUND TASK, tudo funciona perfeitamente.
Mas obviamente não é o que queremos fazer. Queremos manter o programa original da SAP.
Já pesquisamos notas para esse problema, mas não encontramos nada que se refira a esse problema.
Alguém mais se deparou com essa situação?
Desde já agradeço pela ajuda.
Rodrigo Ferreira -
Generate prov.xml for Creative Cloud. Return Code 27
We're trying to follow this guide (Creative Cloud Help | Using Adobe Provisioning Toolkit Enterprise Edition) to serialize a package (or something). We're stuck on generating prov.xml. My best attempt at an entry is:
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\CCP\utilities\APTEE>adobe_prtk.exe --tool=VolumeSerialize --generate --serial=xxxx-xxxx-xxxx-xxxx-xxxx-xxxx --regsuppress=ss --eulasuppress --locales=en_US --provfilepath=C:\Program Fil
es (x86)\Common Files\Adobe\OOBE\PDApp\CCP
It says half of this is optional, but I'm skeptical.
Anyway, I'm getting return code 27. This indicates that it is unable to edit the prov.xml file specified. I didn't specify a prov.xml file, I'm trying to make one. The syntax I'm using differs from what I found on the page I linked, as that was giving me syntax errors. I lifted this off someone else's code. I've tried just about every variation I can think of. Any help would be appreciated.
This is on WindowsOne of these links may help
http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent -
hello,
I am trying to insert a sales quotation in XML file format into SAP B1.
In the message log i get an error : Value too long in property 'CardCode' of 'Document'
every time i use an Item code or a card code containing Hebrew characters , i get garbage in the message:
i defind the B1 sender system language to Hebrew and i don't see the reason for the problem.
thanks, udiHi Eddy,
I only get the error message in hebrew.
i tried a sales quotation where the customer code and item code were in english and it loaded succesfully.
thanks, udi -
Generate xml source file for Oracle Order Capture Print Quote
Hi,
I am new to xml and need to work on creating templates for Print Quote.
I am trying to generate the xml source file for which I enabled the report in system administrator and set the output to XML and assigned to Quoting Reports responsiblity. I then assigned XML Report Publisher to the same responsiblity.
I ran the report (Print Quote) and then I am trying to run the XML Report Publisher but I cannot get the request id in the list of values.
I am able to generate xml source file for other reports like Printed Purchase Order etc.,
The view output for the (Print Quote) report is as follows:
<?xml version="1.0" ?>
- <!-- Generated by Oracle Reports version 6.0.8.26.0
-->
<ASOPQTER />
How do I get the xml source file? Or are there seeded templates that I can use to create more templates? Any help would be appreciated. Thanks RaviHi, I am in the same position - did this issue ever ger resolved by anyone. I have done a few XMLP reports successfully now using the Word add-in, but customising the Quote output differs from other standard reports.
If you look at the data definition for Quote it is a 'dummy' definition and has no XML file attached. Does anyone know how I can get the XML format for the report output?
Also the template uses XSL-FO ?!?!?! rather than RTF - not sure how to work with this, the Oracle docs are not very helpful in this regard either.
Has anyone successfully managed to customise the Quote print report? Many thanks,
Roger -
Using a SQL data source and XML data source in the same template
I am trying to develop a template for the Request for Quote report generated in Apps 11.5.10. I have loaded the data from the XML output into the template, but I am missing one field - I need the org_id from the po_headers table. Is it possible to use a sql data source (i.e., "select org_id from po_headers_all where po_header_id = [insert header_id from xml data]...") in addition to the xml data source to populate the template at runtime? When you use the Insert > SQL functionality is it static at the time the template is created, or does it call to the database at runtime? I've looked through all the docs I could find, but this isn't clear.
Thanks for any help or suggestions you may have.
RhondaHi Pablo
Thats a tough one ... if you go custom with a data template you will at least get support on the data template functionality ie you have a problem when you try and build one. You will not get support on the query inside the data template as you might have gotten with the Oracle Report, well you could at least log a bug against development for a bad query.
Eventually that Oracle Report will be converted by development anyway, theres an R12 project going on right now to switch the shipped OReports to data templates. AT this point you'll be fully supported again but:
1. You have to have R12 and
2. You'll need to wait for the patch
On reflection, if you are confident enough in the query then Oracle will support you on its implementation within a data template. Going forward you may be able to swap out your DT and out in the Oracle one without too much effort.
Regards, Tim -
Questions on LDAP w.r.t XML Publisher 5.6.2
Hi all,
I have 2 questions on LDAP integration w.r.t XML P 5.6.2
1) Is OID the only supported LDAP repository? I tried to set up a Iplanet directory server against XMLP, but could not. Did I miss something, or it is not supported?
Other than OID, any other LDAP supported?
2) Suppose, my use-case is: I want to show some values from the database, and also in the same report, print out the user attributes from the LDAP (like email id of the user, for example) who fired the report, then is this possible?
Thanks,
Ambarish,Ok. Question 1 - I have answered myself. I could not set up SunONE Directory server against XMLP :-(
But I could set up against openldap. :-)
I plan to contribute to the blog in 2/3 days time on how this can be done.
But I still need some help on the question 2. How can I create a report which has all the data from both the backend database, and well as from the LDAP repository. For example, report like:
Report Fired By:
EMAIL id:
Mobile:
(data1, data2...)
where data1, data2 comes from the database, and email id, mobile from the LDAP. -
VO Extension Error in modifying the query of XML Publisher Report Template
Hi Friends,
I have one requirement related to calling XML Publisher Reports Template from OAF Page.
When clicking on the submit button the XML Publisher template is calling and displaying the data.
Our requirement is to display some more columns in the XML Publisher Template and display the data.
As according to OAF stndards,whenever we need to add new columns for display or SELECT purpose,
we will do the VO Extension. So we modified the query by adding the new additional colums in the standard VO.
I am able to retrieve the data from the SQL DEVELOPER. But when doing the VO Extension process and
calling the template from the OAF page its throwing the following error.Please suggest me some alternatives
to fix the issue.
oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT
DECODE(ASO_QUOTES.RESOURCE_ID, null, sales.name, sales1.name) sales_rep_name,
aso_quotes.quote_name,
aso_quotes.contract_id,
aso_quotes.quote_number||decode(aso_quotes.quote_version,NULL,'',' - ') || aso_quotes.quote_version quote_name_version,
to_char(aso_quotes.quote_expiration_date, nvl(FND_PROFILE.VALUE('ICX_DATE_FORMAT_MASK'), 'DD-MON-RRRR')) quote_expiration_date,
TO_NUMBER(TO_CHAR(aso_quotes.quote_expiration_date,'J')) - TO_NUMBER(TO_CHAR(Sysdate,'J')) duration,
I_HEADER_CONTACT_PARTY.PARTY_NAME sold_to_contact_name,
I_CUST_PARTIES.party_name customer_name,
I_PHONE.PHONE_AREA_CODE || DECODE(I_PHONE.PHONE_AREA_CODE , NULL, '',' ' ) || I_PHONE.PHONE_NUMBER full_phone_number,
I_INVOICE_REL_PARTY.PARTY_NAME invoice_to_contact_name,
I_ACCTS_INV_PARTY.PARTY_NAME invoice_to_cust_party_name,
I_INVOICE_LOCATIONS.ADDRESS1 invoice_to_address1,
I_INVOICE_LOCATIONS.ADDRESS2 invoice_to_address2,
I_INVOICE_LOCATIONS.ADDRESS3 invoice_to_address3,
I_INVOICE_LOCATIONS.ADDRESS4 invoice_to_address4,
decode(I_INVOICE_LOCATIONS.city, null,'',I_INVOICE_LOCATIONS.city || decode(I_INVOICE_LOCATIONS.county,null,'',',' || I_INVOICE_LOCATIONS.county)) invoice_to_city,
I_INVOICE_LOCATIONS.state || decode(I_INVOICE_LOCATIONS.postal_code, null,'',' '||
I_INVOICE_LOCATIONS.postal_code || decode(I_INVOICE_LOCATIONS.province,null,'',',' ||I_INVOICE_LOCATIONS.province )) invoice_to_county,
I_INVOICE_LOCATIONS.country invoice_to_country,
aso_quotes.currency_code Currency_Code,
(select distinct ppf.email_address
from per_people_f ppf,
JTF_RS_SALESREPS jrs
where jrs.resource_id = aso_quotes.resource_id
and jrs.PERSON_ID = ppf.person_id
and ppf.person_type_id = 3
) Sales_Rep_Email,
aso_quotes.quote_header_id, oav.name||decode(oav.agreement_num,NULL,'',',')||oav.agreement_num||decode(oav.agreement_num,NULL,'',',')||oav.revision Agreement_name,
oav.name||oav.agreement_num||oav.revision Agreement_check,
to_char(oav.revision_date, nvl(FND_PROFILE.VALUE('ICX_DATE_FORMAT_MASK'), 'DD-MON-RRRR')) revision_date,
(select payment_term_name
FROM
aso_payments_v
WHERE
quote_line_id is null and
quote_header_id = aso_quotes.quote_header_id) payment_terms,
to_char(sysdate, nvl(FND_PROFILE.VALUE('ICX_DATE_FORMAT_MASK'), 'DD-MON-RRRR')) curr_date,
aso_quotes.total_list_price total_list_price,
aso_quotes.total_adjusted_amount total_adjusted_amount,
(aso_quotes.total_list_price + aso_quotes.total_adjusted_amount) total_net_price,
aso_quotes.total_shipping_charge charges_total,
aso_quotes.total_tax taxes_total,
aso_quotes.total_quote_price total_quote_price,
(select cust_po_number
FROM
aso_payments
WHERE
quote_line_id is null and
quote_header_id = aso_quotes.quote_header_id ) cust_po_number,
(select fct.name
from fnd_currencies_tl fct
where aso_quotes.currency_code = fct.currency_code
and fct.language = userenv('lang')) Currency_Name,
(select fcurr.symbol
from fnd_currencies fcurr
where aso_quotes.currency_code = fcurr.currency_code) Currency_Symbol,
(Select meaning
From oe_lookups
Where lookup_type = 'FREIGHT_TERMS'
And lookup_code = (select aship.freight_terms_code
from aso_shipments aship
where aship.quote_header_id = aso_quotes.quote_header_id
and aship.quote_line_id is null)) Freight_Terms,
(Select fl.meaning
From fnd_lookup_values fl
where fl.lookup_type = 'SHIP_METHOD'
And fl.lookup_code = (select aship.ship_method_code
from aso_shipments aship
where aship.quote_header_id = aso_quotes.quote_header_id
and aship.quote_line_id is null)
And fl.language = userenv('LANG')) shipping_method ,
aso_quotes.org_id ,
aso_quotes.quote_number ,
aso_quotes.Quote_version VersionNumber,
I_ACCTS.ACCOUNT_NUMBER CustomerNumber,
oav.agreement_num Agreement_Number,
:action action,
aso_quotes.minisite_id minisite_id,
(select imt.msite_name from ibe_msites_tl imt where imt.msite_id = aso_quotes.minisite_id
and imt.language = userenv('LANG')) msite_name,
(select asl.meaning from oe_lookups asl, aso_shipments ash
where asl.lookup_type = 'SHIPMENT_PRIORITY'
and asl.lookup_code = ash.shipment_priority_code
and ash.quote_header_id = aso_quotes.quote_header_id) shipment_priority_name
,(select OE_SYS_PARAMETERS.VALUE('INSTALLMENT_OPTIONS',aso_quotes.org_id) from dual) enable_pay_now
from
hz_CONTACT_POINTS I_PHONE ,
HZ_RELATIONSHIPS I_HEADER_CONTACT_REL,
HZ_PARTIES I_HEADER_CONTACT_PARTY,
ASO_QUOTE_HEADERS ASO_QUOTES,
HZ_RELATIONSHIPS I_INVOICE_REL,
HZ_PARTIES I_INVOICE_REL_PARTY,
HZ_PARTY_sites I_INVOICE_PARTY_SITES,
HZ_LOCATIONS I_INVOICE_LOCATIONS,
HZ_PARTIES I_CUST_PARTIES,
HZ_CUST_ACCOUNTS I_ACCTS,
HZ_CUST_ACCOUNTS I_ACCTS_INV,
HZ_PARTIES I_ACCTS_INV_PARTY,
JTF_RS_SALESREPS_MO_V SALES,
JTF_RS_SALESREPS_MO_V SALES1,
FND_TERRITORIES_VL I_TERRITORIES,
oe_agreements_vl oav
where
ASO_QUOTES.PARTY_ID = I_HEADER_CONTACT_REL.PARTY_ID(+)
AND I_HEADER_CONTACT_REL.SUBJECT_ID = I_HEADER_CONTACT_PARTY.PARTY_ID(+)
AND I_HEADER_CONTACT_REL.SUBJECT_TYPE(+) = 'PERSON'
AND I_HEADER_CONTACT_REL.SUBJECT_TABLE_NAME(+) = 'HZ_PARTIES'
and i_header_contact_rel.object_id(+) = aso_quotes.cust_party_id
AND ASO_QUOTES .INVOICE_TO_PARTY_SITE_ID = I_INVOICE_PARTY_SITES.PARTY_SITE_ID (+)
AND I_INVOICE_PARTY_SITES.LOCATION_ID = I_INVOICE_LOCATIONS.LOCATION_ID(+)
AND I_INVOICE_LOCATIONS.country = I_TERRITORIES.territory_code(+)
AND ASO_QUOTES.INVOICE_TO_PARTY_ID = I_INVOICE_REL.PARTY_ID(+)
AND I_INVOICE_REL.SUBJECT_ID = I_INVOICE_REL_PARTY.PARTY_ID(+)
AND I_INVOICE_REL.SUBJECT_TYPE(+) = 'PERSON'
AND I_INVOICE_REL.SUBJECT_TABLE_NAME(+) = 'HZ_PARTIES'
AND i_invoice_rel.object_id (+) = aso_quotes.invoice_to_cust_party_id
AND ASO_QUOTES.ORG_ID = SALES.ORG_ID(+)
AND ASO_QUOTES.EMPLOYEE_PERSON_ID = SALES.PERSON_ID (+)
AND ASO_QUOTES.ORG_ID = SALES1.ORG_ID (+)
AND ASO_QUOTES.RESOURCE_ID = SALES1.RESOURCE_ID (+)
AND ASO_QUOTES.CUST_ACCOUNT_ID =I_ACCTS.CUST_ACCOUNT_ID(+)
AND ASO_QUOTES.CUST_PARTY_ID = I_CUST_PARTIES.PARTY_ID
AND ASO_QUOTES.INVOICE_TO_CUST_ACCOUNT_ID = I_ACCTS_INV.CUST_ACCOUNT_ID(+)
AND ASO_QUOTES.INVOICE_TO_CUST_PARTY_ID = I_ACCTS_INV_PARTY.PARTY_ID(+)
AND aso_quotes.phone_id = i_phone.contact_point_Id(+)
AND oav.agreement_id(+) = aso_quotes.contract_id
AND aso_quotes.quote_header_id = 666584
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:912)
at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:886)
at oracle.apps.fnd.framework.OAException.wrapperInvocationTargetException(OAException.java:1009)
at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:211)
at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:153)
at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(OAApplicationModuleImpl.java:762)
at oracle.apps.aso.print.webui.MainCO.processRequest(MainCO.java:180)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:600)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.beans.layout.OAHeaderBean.processRequest(OAHeaderBean.java:391)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1182)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2607)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1940)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
at OA.jspService(_OA.java:212)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
at OA.jspService(_OA.java:221)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
## Detail 0 ##
java.sql.SQLException: Attempt to set a parameter name that does not occur in the SQL: 1
at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:11915)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObjectAtName(OraclePreparedStatementWrapper.java:815)
at oracle.jbo.server.OracleSQLBuilderImpl.bindParamValue(OracleSQLBuilderImpl.java:3919)
at oracle.jbo.server.BaseSQLBuilderImpl.bindParametersForStmt(BaseSQLBuilderImpl.java:3335)
at oracle.jbo.server.ViewObjectImpl.bindParametersForCollection(ViewObjectImpl.java:13827)
at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:804)
at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:669)
at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:3723)
at oracle.jbo.server.OAJboViewObjectImpl.executeQueryForCollection(Unknown Source)
at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQueryForCollection(OAViewObjectImpl.java:4560)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:743)
at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:892)
at oracle.jbo.server.ViewRowSetImpl.executeQueryForMode(ViewRowSetImpl.java:806)
at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:800)
at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:3643)
at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQuery(OAViewObjectImpl.java:439)
at oracle.apps.aso.print.server.PrintQuoteAMImpl.queryQuote(PrintQuoteAMImpl.java:447)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:190)
at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:153)
at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(OAApplicationModuleImpl.java:762)
at oracle.apps.aso.print.webui.MainCO.processRequest(MainCO.java:180)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:600)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.beans.layout.OAHeaderBean.processRequest(OAHeaderBean.java:391)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1182)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2607)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1940)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
at OA.jspService(_OA.java:212)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
at OA.jspService(_OA.java:221)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
java.sql.SQLException: Attempt to set a parameter name that does not occur in the SQL: 1
at oracle.jdbc.driver.OraclePreparedStatement.setObjectAtName(OraclePreparedStatement.java:11915)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObjectAtName(OraclePreparedStatementWrapper.java:815)
at oracle.jbo.server.OracleSQLBuilderImpl.bindParamValue(OracleSQLBuilderImpl.java:3919)
at oracle.jbo.server.BaseSQLBuilderImpl.bindParametersForStmt(BaseSQLBuilderImpl.java:3335)
at oracle.jbo.server.ViewObjectImpl.bindParametersForCollection(ViewObjectImpl.java:13827)
at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:804)
at oracle.jbo.server.QueryCollection.executeQuery(QueryCollection.java:669)
at oracle.jbo.server.ViewObjectImpl.executeQueryForCollection(ViewObjectImpl.java:3723)
at oracle.jbo.server.OAJboViewObjectImpl.executeQueryForCollection(Unknown Source)
at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQueryForCollection(OAViewObjectImpl.java:4560)
at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:743)
at oracle.jbo.server.ViewRowSetImpl.executeQueryForMasters(ViewRowSetImpl.java:892)
at oracle.jbo.server.ViewRowSetImpl.executeQueryForMode(ViewRowSetImpl.java:806)
at oracle.jbo.server.ViewRowSetImpl.executeQuery(ViewRowSetImpl.java:800)
at oracle.jbo.server.ViewObjectImpl.executeQuery(ViewObjectImpl.java:3643)
at oracle.apps.fnd.framework.server.OAViewObjectImpl.executeQuery(OAViewObjectImpl.java:439)
at oracle.apps.aso.print.server.PrintQuoteAMImpl.queryQuote(PrintQuoteAMImpl.java:447)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:190)
at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(OAUtility.java:153)
at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(OAApplicationModuleImpl.java:762)
at oracle.apps.aso.print.webui.MainCO.processRequest(MainCO.java:180)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:600)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.beans.layout.OAHeaderBean.processRequest(OAHeaderBean.java:391)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1182)
at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2607)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1940)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
at OA.jspService(_OA.java:212)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
at OA.jspService(_OA.java:221)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)"java.sql.SQLException: Attempt to set a parameter name that does not occur in the SQL"
Try the suggestions in this? https://kr.forums.oracle.com/forums/thread.jspa?messageID=10253362
Check the bindign styles and bind variables..
Maybe you are looking for
-
Users were re-created in Child systems not in Cnetral System (CUA)
Hi, The set of users were deleted some time back and today i verified in child system (PROD) with criteria as list of users without roles/profiles then I found a set of users in child systems. Were as those user master records are not showing in Cent
-
Delivery Document Lock Issue in Z Program using BAPI(s)
Hi, I am a functional consultant posting this in ABAP forum. We have developed a Z-Program. User enters the Service Order no. in this program and executes it. The program then updates the following linked documents in the following sequence using BAP
-
I gave an ipod touch 4 to my youngest son for his birthday. Installed iTunes and updated firmware to 4.3.5 (8L1); all OK Created Apple ID and can logon to this using computer. When using the working apple ID on the iPod however, keep getting message
-
Jsp Page session vaiable to java class and vise versa
Hi to all, I am new to jsp, i have to programs, one jsp page and another java class. in jsp page i get the user data from html form and put the id in session. here i have to call the session vaiable to my java class where it (variable)initialize a fi
-
No Thumbnails, no fullscreen mode
Apart from the fact that it is practically impossible to empty the iPhoto trash (I've tried each and any piece of advice suggested here) sometimes fullscreen mode is suddenly no longer available for some pictures (although it was the day before) so t