Xml report:Page break issue

Hi I am working on PO Printing Report.There are mainly three section .1 is Header part which contains informaition like Bill to Address Ship to address,vendor address payment terms etc,middle part contais lots of information like header notes,supplier header note,note to vendor ,ship instruction,line notes ,if po cancelled then its informaition,if any line gets cancelled than the same information , all lines for this PO and many more.After this section we have footer like part which have total column and signature.The total and signature are dynamic.i.e should appean in last page only.The last page of report for a PO conatains a image Terms And Condtion.
Now problem is as there are lots of data in middle part ,It pushes the footer part to the next page.I need to break the page after certain height of table or certain no of records in table so as to have footer remain in each page.
Is there any way to fix no of records in middle part or calculate heigth of table at run time ...when it reaches to its max height ,I break the page.
Or I include the footer section in page footer but as its dynamic How can I get total column value and signature url dynamically.
Please suggest me how to achieve this.....

Welcome to the forum !
I don't see your report, but I'm almost sure that one of your data exceeds field size. To fix it, try set for all your report items (frames, fields, repeating frames) vertical elasticity to variable and horizontal elasticity to fixed. It should fix your problem. Afterwards you can investigate which filed/frame causes an error, setting back elasticity of your items
regards
kikolus
Edited by: kikolus on 2012-11-19 06:39

Similar Messages

  • Upgrading reports from 6i to 10g r2 : page break issue

    Hi All
    we have 150 business critical reports that we are upgrading to 10g. When we run the reports to browser, page break in the browser does not coincide with the report page break. I am getting headings in the middle of pages, how do I fix it?
    This is urgent, any help is appreciated.
    Rgds
    Arvind Balaraman

    When we changed the reports output to PDF instead of HTML. The pagebreak issue is no longer an issue.
    Have anyone done any benchmark against performance and cpu utilization in using pdf format to generate and display reports.
    Rgds
    Arvind

  • Report page break not correct in browser

    Hi all
    I have 150+ reports that I am converting from 6i to 10g. These repors print correctly in 6i (client SErver) with page break at proper places. When I run the same report on web, the page breaks in the reports are converted to lines in the html output. Also the page headers appearin the middle of the page. Page break seems to be controlled by the browser and not by report. How do I make the report page break the same way as in 6i.
    any help is appreciated. We are in the middle of testing and the users will not sign off until this is resolved.
    Rgds
    Arvind

    SET
    System parameter MODE = Default
    On Report Level Property Sheet
    Under Report Escapes
    SET After Page Value =
    <table style="page-break-before: always;height=0"></table>
    Run reports as DESFORMAT=HTML
    This will resolve the Page Break issue.
    Unfortunately, printing reports from browser will generate a blank last page.
    Perhaps the command line parm BLANKPAGES=NO will work for you...
    I am told it does not work because printing is a browser issue not a reports issue...

  • Crystal Reports - Page Break/Create Address Labels

    Problem description:
    I am creating a letter writer function for a Windows application. The how-to documentation I have is not providing the necessary step(s) for showing one record per page.  From what I have gathered there is a page break function, however, I have not been able to implement it.   I have set up a Crystal report in a .Net 2008 (Visual Basic) application with a Section 5 (Page Footer) and need to break and start a new page at this point.  One page per letter (record) for multiple letter distributions.
    I also need specific instructions on how to create an address label maker for this application.  So far I was able to include a Crystal Reports form set up specifically for address labels but not to make it work.
    Since the application will be distributed this is not a machine specific issue.
    Jaime Baldovinos

    Hello,
    apart from the CR manual please see a [good guide |http://www.codeguru.com/forum/archive/index.php/f-64.html]for all kind of question related to report design with CR.

  • XML Report Page Layout Problem

    Dear Members,
    We are working on 11i Version of Oracle Apps.
    Recently I developed an XML Report which has two pages.
    I want Page-1 in Landscape style and Page-2 in Portrait Style.
    I've prepared the RTF template in Landscape and on Page-2 I have selected the portrait option. Therefore now I have page-1 in Landscape and page-2 in Portrait.
    With this style when I am running the report all the landscape pages are displayed first and then portrait pages are displayed after the landscape pages.
    But the expected output is, first page-1 should be displayed in landscape and then immediately page-2 should be displayed in portrait for each record.
    Kindly please assist me in resolving this issue.
    Many thanks in advance.
    Best Regards,
    Arun Reddy D.

    Dear Members,
    We are working on 11i Version of Oracle Apps.
    Recently I developed an XML Report which has two pages.
    I want Page-1 in Landscape style and Page-2 in Portrait Style.
    I've prepared the RTF template in Landscape and on Page-2 I have selected the portrait option. Therefore now I have page-1 in Landscape and page-2 in Portrait.
    With this style when I am running the report all the landscape pages are displayed first and then portrait pages are displayed after the landscape pages.
    But the expected output is, first page-1 should be displayed in landscape and then immediately page-2 should be displayed in portrait for each record.
    Kindly please assist me in resolving this issue.
    Many thanks in advance.
    Best Regards,
    Arun Reddy D.

  • Page Break Issue

    Hi All,
    I would need to apply page break on one BI Publisher report.
    For each empoyee the result should get displayed in separate page. I have made Emplid as Group by field in the rtf and applyied <?split-by-page-break:?> on this group.
    I have the below tags in my rtf...
    <?for-each-group:ROW;./Emplid?>
    data filed1,data filed2..................
    <?split-by-page-break:?><?end for-each-group?>
    If rtf file is having one page of report fileds and applied <?split-by-page-break:?> at end of the group, the PDF output places the page-breaks perfectly. In a case of report fileds are in more than one page(rtf contains 2 pages of code) and If I apply <?split-by-page-break:?> at the end of the group. So the report is not making page breaks rather it shows continues data.
    I am using BI 10.1.3.3.2 and word2007. Is the version makes any difference? Can you pls help me on this?
    Thanks in advance!!!
    Regards,
    Ramesh

    The scenario directly below puts an extra line on the top of the page after a group page break:
    <?for-each-group:ROW;.//row?>
    data filed1,data filed2..................
    <?split-by-page-break:?><?end for-each-group?>
    The scenario directly works perfectly, no extral line:
    <?for-each-group:.//row?><xsl:attribute name="break-before">page</xsl:attribute>
    data filed1,data filed2..................
    <?end for-each?>
    Thanks for this one!

  • Group above master/detail report; page break causes repeat of master frame

    Hi
    I have a a group above master/detail report; when there is a page break part way through the master frame it causes the whole master frame to be repeated on the next page. I don't want this to happen, I just want the remainder of the master frame to be displayed on the next page. any ideas?
    TIA

    Hi
    I've tried switching the "Page Protect" to No at the page level and the "Print Object On" is set to "First Page" but it doesn't solve the problem. The whole master frame is repeated on the next page when a page break occurs part way through. The master/detail Repeating Frame "Print Object On" is set to "Last Page".
    Any other ideas?
    TIA

  • Orage reports - page break before

    Hi
    Can any more experience devolpers help? I have a group above report that I wish the group to either page break after or page break before. If I set page break before then the group only prints on page 2 onwards. If I set page break after it prints on page 1 ok but then the report total always prints on its own on the last page.

    Hi,
    sounds like there's no child object for your object with page break before. This property has only impact of the object itself and all it's child objects. An object is a child object of another object, if the position of this objects has impact of the own position. This is only the case, if the parent object is vertical expandable and the child object is horizontally overlapping the virtual expand-region, or the child-object is anchored to the parent object.
    So if you have this layout:
    blue box fixed size
    red box fixed size
    yellow box fixed size
    and you set page break before to the red box, you will get:
    blue box
    yellow box
    -- page break
    red box
    If the red box is verical expandable you will get:
    blue box
    --page break*
    red box
    yellow box
    So in your tabluar report your field of the report should be in a frame and this frame should be child object of your new object which must be vertical expandable or anchor them together.
    Regards
    Rainer

  • Page Break Issue - Excel 2013

    I'm about to explode, trying to figure out why this problem is happening. I have two users who are opening
    an Excel file from the same location, and they're doing their own modifications/saves. When one user opens the document and prints, the Print Preview shows 12 pages, and there are no problems. When the other user opens the same file and prints, there are 18
    pages. 
    Throughout those 18 pages, there are several blank pages interspersed with populated ones, and there are also
    a couple of pages with one line or so, from the end of a previous page. If I go to View>>Page Break Preview, this extended document shows little slivers of extra pages. The top of those little "pages" are dashed, and the bottom line is the
    solid page-break, for the next page. 
    Why would this be happening to one user, but not the other? They're both opening the exact same page/template.
    Oh, and as a side note, I'm also getting 18 pages with blanks/single-lines, when I open the file. Is there an advanced setting that the 12-page user has checked in Excel that I'm missing? Am I providing enough information? 
    Any help is massively appreciated.
    - Thanks

    It's probably caused by a difference in printers. Excel uses the printer settings to place page breaks
    Some printers, e.g. inkjet printers, have a smaller printable area than others, e.g. laser printers. As a result, less information will fit on a page.
    The worksheet apparently also has manually set page breaks.
    Let's take a simple example: the used area of the worksheet has 94 used rows, and a manual page break has been set below row 47. I'll assume that the used area is rather narrow.
    On printer A, 48 rows fit on a page. So the first 47 rows will be printed on page 1, and the next 47 rows on page 2.
    On printer B, only 46 rows fit on a page because it has a smaller printable area. So the first 46 rows will be printed on page 1, the 47th row on page 2 (not more, because there is a manual page break below row 47). The next 46 rows will be printed on page
    3, and the 94th and last row on page 4.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Page break issue with subform AddInstance

    I would like the table on page 4 of this form --- http://www.tahc.state.tx.us/10-09_TrichomoniasisEpiInvestigation.pdf --- to be allowed to break across a page if necessary. I want the button on that page to add another instance of the table at the top of the next available page.
    I am clearly missing something about subforms and overflow because in LCD, this is a 5-page form. When it's opened in Acrobat, it's a 7-page form (the table displays on page 6) and and the table extends past the bottom of the page so that the button is not visible.
    Any leads on how I can fix this? Thanks.

    Thank you for the tip. Your fix is a big step in the right direction --- the form renders as it should but only if I don't enable usage rights for Reader. After usage rights are enabled, the page break problems reappear and the blank table runs off the bottom of the page. Do you know why this occurs? (I've reposted your fixed form with user rights enabled---http://www.tahc.state.tx.us/10-09_TrichomoniasisEpiInvestigation.pdf.) Thanks again.

  • How to activate a different sub-report for each row in the data set as main report page breaks on each row of data in the main dataset

    I am going to try asking this same question a different way as I have yet to find a working solution to my problem.  I have a main report and then 8 sub reports.  My main report has one data set and returns one row of data per account number.  One
    of the fields in the main data set is called AccountProf.  My main report displays one page per Account number and then calls a different sub report based on that account's AccountProf value.  The sub reports take in the account number as a parameter
    and get multiple rows of data to display that accounts usage formatted differntly for each AccountProf (hence the 8 different sub report.  
    So far I can figure out how to do everything but setting the visibility property of each sub-reports when I have multiple accounts.  If I use the following expression for the visibility property on each sub report, it makes all the applicable sub report
    for all the accounts requested visible at once:
    =IIF(Fields!AccountProf.Value= "USE_PLUS_DMD",False,True)
    *The value in bold USE_PLUS_DMD  is different for each sub report.
    Here is a look at what the main report look like:
    Here is the main reports data set:

    Hi JasonDWilson77,
    According to your description, there is a main report and 8 sub reports in the report, you want to set visibility of sub reports, if no value is passed to the parameter of sub report, the sub report will not be displayed. If that is the case, please refer
    to the following steps:
      1. Create a new parameter named NewAccountNumber, set its data type the same as @AccountNumber, select Allow multiple values, set Visibility to be hidden, then set all available values to default values.
      2. Right-click the first sub report and open Subreport Properties dialog box, click Parameters in left pane, set name to AccountNumber, then click (fx) button, type the expression like below:
    =Parameters! NewAccountNumber(0)
      3. Click Visibility in left pane, select Show or hide based on an expression, then click (fx) button and type the expression like below:
    =IIF(InStr(Join(Parameters! AccountNumber.Value), Parameters!NewAccountNumber.Value(0))>0 , false,true)
      4. Modify parameter of other sub reports like step2.
      5. Set visibility of other sub reports like step3.
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu
    If you have any feedback on our support, please click
    here.
    Wendy Fu
    TechNet Community Support

  • XML Report Excel Display Issue

    Hello All,
    While working on MS-Excel we observed the default behavior of MS-Excel is to show decimal places only when it is greater than 00 i.e. “22.56”
    But when the value is “22.00”, MS-Excel will display “22”
    Our client required those values with two decimal places. If the value is 22 then it should display 22.00.we already achieved that value with converted those numerical value to character with using TO_CHAR function.but they required data should be display in numerical.
    Can anyone please help to achieve this scenario?
    Thanks in advance
    Thanks,
    Pushpal

    thanks Alex..
    we have a rtf template created in ms-word. whatever the xml output generates, it takes the rtf template as a source to display the xml data in ms-excel.
    So, we cant change anything in ms excel.. we need to change the rtf template in ms-word..
    could you please help in how to set default datatype for numeric values in ms-word.
    Thnks again..
    pushpal

  • Page Break In XML Publisher RTF Templates Are Not Working

    Please refer to the Metalink Doc below:
    Subject:      Page Break In XML Publisher RTF Templates Are Not Working.
    Doc ID:      559111.1      
    Type:      PROBLEM
    Modified Date:      24-MAR-2008      
    Status:      MODERATED
    In this Document
    Symptoms
    Cause
    Solution
    References
    This document is being delivered to you via Oracle Support's Rapid Visibility (RaV) process, and therefore has not been subject to an independent technical review.
    Applies to:
    Oracle XML Publisher - Version: 5.6.3
    This problem can occur on any platform.
    Symptoms
    Using XML Publisher version 5.6.3 in 11.5.10.
    Find <?split-by-page-break:?> syntax is ignored.
    EXPECTED BEHAVIOR
    Expect page breaks to occur at point set by "split-by-page-break:" code.
    STEPS
    The issue can be reproduced at will with the following steps:
    1. Create a template.
    2. Call split-by-page-break: inside a loop.
    3. Output is not formatted correctly, page break call is ignored,
    Cause
    Unpublished BUG 5011628 SPLIT-BY-PAGE-BREAK NOT WORKING IF ADDED SORT WITHIN DYNAMIC GROUP
    Unpublished BUG 5011628 matches the client issue as it is a call to split-by-page-break inside a loop.
    Fix is in ScalableStringList.java version 115.4.
    This is delivered in <Bug 6165466> XDOFX:CHR(N) FUNCTION FAILING.
    Solution
    To implement the solution, please execute the following steps:
    1. Apply Patch 6165466 when it is released.
    2. Test your report.
    References
    Bug 6165466 - XDOFX:CHR(N) FUNCTION FAILING
    Keywords
    XML~PUBLISHER; LOOP; DYNAMIC~GROUP; PAGE~BREAK;
    Help us improve our service. Please email us your comments for this document. .

    Hi JDev,
    Check this out:
    http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
    Hope this might help.
    Thanks

  • Report Coupon Page Break?

    Hi guys,
    My issue is I have a report that contains a fixed header, a vendor line that follows with a list of invoices that will continue until it reaches the last item, and a footer which should be fixed at the bottom of the page similar to the header on the top. The thing is I want any extra over flow of listed items to not push said footer to the next page, but rather have it cut off at a certain amount of items and then carry over to next page. Essentially, I would like for the list to have a page break before the footer, while keeping the footer as it is.
    As I have it on my current report, I was able to group the invoice list and have it so it only has 4 lines on the first page (to try to maintain the integrity of the footer), and the rest breaks for 20 lines per page. However, there is a huge blank space where I would like my footer to be, and the footer itself is carried below the last of the invoice list. Is there an approach I could take to somehow keep that footer in between the page break of the list?
    My original take was to use a master page footer, however the report needs to be able to print out multiple vendors, meaning that the footer will dynamically change according to the change in vendors.
    Here is my rpt design attached as well as xml test files.

    Bump
    Still having this issue and haven't been able to find a way around it, any help would be appreciated.

  • Issue With Page Break When Sorting is also applied on group

    Hi
    I am facing an issue with Page break only when I have sorting applied on the grouping that I have in the template.
    The following is the sample XML
    <ROWSET>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Accounts</ORGANIZATION>
    <FULL_NAME>test1,</FULL_NAME>
    <ELEMENT_NAME>TEST BONUS</ELEMENT_NAME>
    <CLASSIFICATION>Supplemental Earnings</CLASSIFICATION>
    <RUN_VALUE>250</RUN_VALUE>
    <MONTH_VALUE>500</MONTH_VALUE>
    <QUARTER_VALUE>500</QUARTER_VALUE>
    <YEAR_VALUE>500</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test2</FULL_NAME>
    <ELEMENT_NAME>VOLUNTARY AD AND D</ELEMENT_NAME>
    <CLASSIFICATION>Voluntary Deductions</CLASSIFICATION>
    <RUN_VALUE>5.19</RUN_VALUE>
    <MONTH_VALUE>10.38</MONTH_VALUE>
    <QUARTER_VALUE>10.38</QUARTER_VALUE>
    <YEAR_VALUE>10.38</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test3</FULL_NAME>
    <ELEMENT_NAME>HMO MEDICAL</ELEMENT_NAME>
    <CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
    <RUN_VALUE>19.67</RUN_VALUE>
    <MONTH_VALUE>39.34</MONTH_VALUE>
    <QUARTER_VALUE>39.34</QUARTER_VALUE>
    <YEAR_VALUE>39.34</YEAR_VALUE>
    </ROW>
    <ROW>
    <GRE>org1</GRE>
    <ORGANIZATION>Finance</ORGANIZATION>
    <FULL_NAME>test4</FULL_NAME>
    <ELEMENT_NAME>PENSION NR DC</ELEMENT_NAME>
    <CLASSIFICATION>Pre-Tax Deductions</CLASSIFICATION>
    <RUN_VALUE>0</RUN_VALUE>
    <MONTH_VALUE>360</MONTH_VALUE>
    <QUARTER_VALUE>360</QUARTER_VALUE>
    <YEAR_VALUE>360</YEAR_VALUE>
    </ROW>
    </ROWSET>
    In the template I group the data based on CLASSIFICATION and then sort on the same column CLASSIFICATION. I have a page-break applied for every group.
    When I generate the PDF, I am not getting the page-breaks for every group. Instead some of them are displayed in the same page.
    But when I remove the sorting that I had in the template on the column CLASSIFICATION, I am getting the output in the desired way but not in a sorted order.
    kumar

    Hi All,
    I am using MS-WORD 2007 and BI Publisher desktop 10.1.3.3.3.
    When I use split-by-page-break, splitting is performed for every line .. but not for group of lines.
    Can anybody throw some light on this?
    FYI...
    I am using this code:
    ?if: position() mod 6= 0?
    ?split-by-page-break:?
    ?end if?
    (Of course with in tags)
    in G_LINES loop.
    Can anybody help me out :-(
    --Saritha                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

Maybe you are looking for