Report Coupon Page Break?

Hi guys,
My issue is I have a report that contains a fixed header, a vendor line that follows with a list of invoices that will continue until it reaches the last item, and a footer which should be fixed at the bottom of the page similar to the header on the top. The thing is I want any extra over flow of listed items to not push said footer to the next page, but rather have it cut off at a certain amount of items and then carry over to next page. Essentially, I would like for the list to have a page break before the footer, while keeping the footer as it is.
As I have it on my current report, I was able to group the invoice list and have it so it only has 4 lines on the first page (to try to maintain the integrity of the footer), and the rest breaks for 20 lines per page. However, there is a huge blank space where I would like my footer to be, and the footer itself is carried below the last of the invoice list. Is there an approach I could take to somehow keep that footer in between the page break of the list?
My original take was to use a master page footer, however the report needs to be able to print out multiple vendors, meaning that the footer will dynamically change according to the change in vendors.
Here is my rpt design attached as well as xml test files.

Bump
Still having this issue and haven't been able to find a way around it, any help would be appreciated.

Similar Messages

  • Vendor open items report without page break after changing vendor account

    Hi,
    I would like to get the vendor open items report without pagination when the vendor account changes.
    The option of deleting the * mark in the Filter page is not valid for me, because this way the vendor's name dissappear. I mean, it would be ok if I could show in the output of the report the name of the vendors.
    Thanks in advance.

    HI,
    If I understood your issue correctly then in the report S_ALR_87012085 is a field "Summarization level (0-4)" in the output controls.
    You just have to set this field to the value '2'.
    When you set the field to two, the page break will first executed, when the page is "full".
    If you want to see information about the "Summarization level (0-4)" field, you just have to set the cursor in it, and press F1.
    I believe this answer solve your problem.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Interactive Reporting Reports w/ Page Breaks and Charts

    I have an IR report that is Grouped. I would like to page break after each group; however, when I set this up, it page breaks be/tw the report header and the very first group. Is there a way to avoid this issue?
    Also, I have created charts from queries. When I drag them into a report body, I can not figure out how to control where the go (and stay). It seems the only way around the issue is to drag them into the report footer, but then if the report body is shorter from one query run to another, it seems to leave the charts on the pages where they were before instead of moving them up to the end of the report body. How can I fix so the chart's location moves depending on the length of the report?
    Thanks.
    Terri T.

    Terri,
    to clarify...Spring works within the same report area, for example a table followed by a chart in the Body. Spring allows the position of the top of the chart to be relative to the bottom of the table so as it grows or shrinks the chart maintains the same space between the two objects. without spring the top of the chart would be relative to the top of the report area it is in and as the table grew the objects would end up being layered.
    You should not need to upload a new CSV file. You can just "Process" it and it will refresh the data. if the CSV file is moved from where it was first imported you will be prompted to find it otherwise the imported file section within the BQY will have any additional Rows and/or Columns that the updated CSV file has.
    Make sense?
    Wayne D. Van Sluys
    TopDown Consulting

  • How to get page break in PSP reports

    Dear All,
    is there a way to generate reports with page break using PSP .i
    am going to use ORacle 9iAS/9i DB and also apart from ORacle 6i
    reports.
    i want to generate reports using PSP/Oracle 9iAS and i need to
    have a facilty for online printing of report like with page
    breaks and sub totals should come on my report...please clarify
    this asap...
    thanks&regards
    rammohan

    HEllo,,
    Checkout the code..
    *& Form after_line_output
    * After line output event is handled via this form
    * L_V_LINE : Capturing line value for page break.
    FORM SUB_after_line_output1 USING l_v_line TYPE slis_lineinfo. "#EC CALLED
    DATA: l_index1 LIKE sy-tabix,
    l_index2 LIKE sy-tabix.
    FIELD-SYMBOLS: <l_fs_output1> TYPE ty_output,
    <l_fs_output2> TYPE ty_output.
    CLEAR l_index1.
    l_index1 = l_v_line-tabindex.
    READ TABLE g_t_output INDEX l_index1 ASSIGNING <l_fs_output1>.
    IF sy-subrc = 0.
    CLEAR l_index2.
    l_index2 = l_index1 + 1.
    READ TABLE g_t_output INDEX l_index2 ASSIGNING <l_fs_output2>.
    IF sy-subrc = 0.
    IF <l_fs_output1>-FAEDT <> <l_fs_output2>-FAEDT .
    * WRITE: sy-uline.
    NEW-PAGE.
    ENDIF.
    ENDIF.
    ENDIF.
    ENDFORM. " after_line_output
    for ref:Page break and Subtotal display in alv
    Re: Page Break while Printing ALV
    hope it helps..,
    Regards,
    Deepu.K

  • How to set Page break in multiple tables ?

    Hi ,
    I have 3 tables in my SSRS report . 3 tables have different groups.
    All groups are showing in different excel tabs as expected. Also dynamically generating each tab name based on the group name .
    But 3 rd table group tab name not generating dynamically but taking 2nd table last group name .
    In below example Johnhancock is my last group of table 2. From first group of 3 rd table onwards it will showing as Johnhancock2, Johnhancock3, Johnhancock4 etc. ( Data is correct only issue with tab name )
    Note: I have used add a page break after  option for all 3 tables . Please suggest if I need to change any settings.

    Hi Kotim,
    According to your description, you have three tables in a report with page breaks between those tables. When you export this report as excel, you have set the worksheets names showing each group name. Now you find all tabs of the third table shows the last
    group name of the second table. Right?
    In Reporting Service, when we export a report to an excel file, if we add page breaks for the report manually, then the report will be exported into multiple worksheets based on page breaks, and the report page names determine the name of worksheets. For
    testing this scenario, we add page breaks between groups and tables, and put the group name into page name. It works fine when we export it to excel file. So we suggest you check the page name of the third table, make sure the page name is the group name of
    the third table. If possible, please post some other detail information about report design. Here we also have a blog for your reference:
    Report Design: Naming Excel Worksheets
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou (Pactera)

  • Page breaks in (html) printed apex report

    I am having a strange problem that appears to be related to APEX page template.
    I have a report that is html generated by a PL/SQL function. I need to have page breaks in the printed report at specific locations. I am adding this style to the html output of the function:
    <STYLE>
    DIV.pageBreak { page-break-before: always; }
    </STYLE>
    and I insert this at the locations I need breaks:
    < D I V CLASS="pageBreak"/>
    (without the spaces in DIV)
    (found this technique here: http://www.unagibay.com/DesktopDefault.aspx?tabindex=1&tabid=100&itemid=1821 )
    This works perfect when I run the report in IE, but FireFox is "ignoring" the page breaks. However, if I take just the output of the PL/SQL function in an html doc, FireFox works fine (breaks at the proper places). This makes me believe something related to the "page wrapper" content generated by APEX causes FireFox to not handle the breaks.
    I have tried copying and editing the Popup and Printer Friendly page templates, but I either remove too much and the page doesn't render, or the page breaks don't work.
    My questions for the APEX gurus are:
    1. Is there an "approved" way to get page breaks in the printed version of an APEX report, or is there a better way to do what I need to do.
    2. What is the minimum contents for a page template (what can I safely remove).
    Thanks,
    Bill

    Hi Owen,
    the page breaks are inserted before/after the section.  Expand the report structure window and make sure that the properties window is open below.  Once you click on the section part, you will see where you can insert the page breaks - the check boxes will appear in the properties.
    yes on the second part - just insert the page break between the data providers and then repeat the header for the data provider on the pages (also check boxes on the properties tab)
    Good luck

  • Page break in html report

    Hi all,
    I am sending a report to external user e-mail id from SAP. The user is receiving the report in html format.
    The user asks me they need a page break on the report after each customer data. I am wondering is it possible to have a page break in html report? If yes, how it is possible?

    Hi,
    I insist : it is not possible with HTML to insert Page breaks. BUT, Tammie is right! You can use CSS (Cascade Style Sheet) to insert page breaks thanks to few lines of code in your HTML page.
    Follow this link to have a look at a very simple piece of code to illustrate this :
    http://www.codeave.com/css/code.asp?u_log=4016
    Here it the code if you don't have access to this URL :
    <html>
    <head>
    <title>CodeAve.com/CSS - Page Break</title>
    <body bgcolor="#FFFFFF">
    <center>
    Page 1
    <br style="page-break-before:always;">
    Page 2
    <br style="page-break-after:always;">
    Page 3
    <p>
    Use print preview on your browser to see how<br>
    this page would print out to three pages
    </center>
    </body>
    </html>
    Hope it helps.
    Don't forget to close the post if solved (so that search in the forum is easier), and reward points (so that SDN members are happy !) 

  • Page break not applying when using sub report inside main report

    I have a main report inside which there is subreport (using SQL Server 2012). I placed some page breaks inside subreport but they were not working. I read on technet forums that this is a a known issue with SSRS. 
    One solution I found is to put a table inside main report, then in first row add a rectangle and set its property "Add a page break after" and then add subreport after this rectangle in that table in main report. I did that and now in some cases
    it does show sub report on a separate page but sometimes it shows subreport on same page.
    Could it be because in some case sub report has no or less data (hence it cannot cover whole page) and in that case it will always show on one page? How can I show empty subreport on a separate page?

    I fixed it by clicking both "Add a page break before" and "Add a page break after" in rectangle.

  • Problems with Page Break in an Interactive Reporting report

    Hello everybody,
    Platform: Hyperion System 9.3.1.
    I have serious problems in managing the 'page break' in an Interactive Reporting report.
    The report shows sales data by store, with article and colour details and it is organized like this:
    group 1: geographic area
    group 2: country
    group 3: city
    group 4: store
    columns: article, colour
    facts: quantity, price, value
    My client's request is to perform a page break at the store group level, meaning that apart from the first store occurance, any change in the store value shoul start a new page.
    The requested result is like this:
    page1: geographic area1
    country1
    city1
    store1
    data store1...
    page 2: store2
    data store2...
    page3: store3
    data store3...
    I tried several combinations of using Break After and Break Before on the store group, with Keep Next / Keep Together and it was impossible to obtain the desired result.
    If I use Break Before the result is as follows:
    page 1: geographic area1
    country1
    city1
    page 2: store1
    data store1...
    page 3: store2
    data store2...
    If I use Break After the result is as follows:
    page 1: geographic area1
    country1
    city1
    store 1
    page 2: data store1...
    store 2
    page 3: data store2...
    even if I specify 'Keep with next' or 'Keep together' for store group and the store data table.
    Any help will be very very appreciated because I've been trying for weeks to figure out this issue.
    Daniela

    First start without using any of the Keep with Next and Keep together.
    Second. try putting the Page Break in the Group Footer. You do not need to keep it visible
    Then you may want to repeat headers on Store in case the Store's Detail rolls onto next page
    Hope this helps
    Wayne

  • Problem with Page Break In ALV Report

    Hi
    I have got a problem in my ALV report. I have a checkbox in the user input screen where users decide whether they want a page break or not in the print preview (or print) page. Now i also have the option to have layout name in the input screen. so If i leave the layout box empty the check or not check of page break works fine. but if use a save layout name in the layout box the add check box doesn't work anymore. If i have a layout name in the layout box it doesn't matter whether i have checked for page break or not it does the same thing.(in one report it always puts the page breaked)
    Any ideas where to look for the error?
    here is the code for the page break. Opt5 is the check box.
      perform build_sort tables pt_sort changing ls_sort.
      ls_sort-fieldname = 'PERNR'.
      ls_sort-subtot    = 'X'.
    IF OPT5 = 'X'.
       ls_sort-GROUP = '*'.
      ENDIF.
      append ls_sort to pt_sort.
      ls_sort-subtot    = ' '.
      ls_sort-GROUP = ''.

    Never mind it was acting like the page break was not working because the layout was saved with the page break on/OFF.

  • How to remove the page break for CSV report

    Hi,
    I'm working on a rdf report and have an issue with page break.
    As usual there exits a page break in the report output. how do I remove it.
    work around: set Page break before/after : NO
    worked on margin re-size, how ever could not resolve the issue.
    Can any one help me on this.
    Thanks in advance.
    Thanks,
    Santhosh

    There are two ways to do this:
    1) If you want to remove and individual dimension from a presentation, you can hide the dimension. This can be performed directly from within QueryBuilder. Within the first section of Query Builder that shows the selected measures selected and associated dimensions, simply remove the required dimensions from the right dialog panel.
    2) To hide all page items within a presentation, simply add the following the property, pagingControlVisible="False", to the presentation tag in your JSP. For example:
    <orabi:Presentation location="Local Computer Sales/Products/KPI Sales Prior Period and Prior Year" id="BIProductKPIs_pres2" pagingControlVisible="False"/>
    Hope this helps
    Business Intelligence Beans Product Management Team
    Oracle Corporation

  • Upgrading reports from 6i to 10g r2 : page break issue

    Hi All
    we have 150 business critical reports that we are upgrading to 10g. When we run the reports to browser, page break in the browser does not coincide with the report page break. I am getting headings in the middle of pages, how do I fix it?
    This is urgent, any help is appreciated.
    Rgds
    Arvind Balaraman

    When we changed the reports output to PDF instead of HTML. The pagebreak issue is no longer an issue.
    Have anyone done any benchmark against performance and cpu utilization in using pdf format to generate and display reports.
    Rgds
    Arvind

  • Page break on Interactive Report

    Hi All,
    I have an interactive report on EMP table with Controlbreak on Deptno column. I want to add page break after every break. In other words, I want to print each department's employees on a separate page. Any help would be highly appreciated.
    Thanks,
    Zahid

    For printing in specific layouts I use Anton Sheffer As_PDF package. Maybe it can help you out.
    I tell about it in dutch: http://mraoul.com/?p=86
    or you can go to antons page: http://technology.amis.nl/blog/8650/as_pdf-generating-a-pdf-document-with-some-plsql

  • Page break in Matrix report

    Hello Experts,
    I am trying to create a custom purchase order that shows shipping distributions.
    I have been successful so far in creating a matrix report that shows this. However, the client's requirement is that I limit the items to at least 10 items per page.
    I need to be able to create a page break to have 10 items per page and to have the header be included in the next page since the header includes the branches where the goods are supposed to be distributed.
    I have tried several things but I was not able to make it work.
    I can provide the xml and the rtf template if needed. Thank you.

    Hi Bifacts,
    Just sent the xml and rtf files your way. I appreciate any feedback you can give as I've been stuck on this for a while now.
    If anyone else can help out, it will be greatly appreciated!

  • How to force a page break if report is only one page long

    Hi all.
    I've been asked to ensure an XMLP report is always 2 pages long, even if the data fits on one page. Does anyone know if it is possible with the Word Add-in to check if a report is only 1 page long and get it to force a page break for the extra page?
    Thanks for your time,
    Joy

    Hello Joy,
    We are working on a bi report that has duplex printing and facing the issue in skipping an extra page when printing multiple people at the same time.
    Please let us know did you already have a solution for this.
    Thanks in advance for your time and solution.
    Best Regards,
    Vinodh

Maybe you are looking for