Xorg 1.8 - Nvidia
Okay, so yesterday I decided to reinstall Archlinux and I've run into some trouble. Basically my graphics card (Nvidia 7600GS) does not want to work with Xorg 1.8 with nvidia's official drivers. It displays an error while trying to load the NVIDIA module. I have also tried the upcoming drivers available on testing and it still wouldn't work. As a last resort I tried the xf86-video-nv drivers and everything worked out of the box.
You can see the logs and configurations over here:
20-nvidia.conf: http://paste.pocoo.org/show/229593/
Xorg.0.log: http://paste.pocoo.org/show/229591/
Xorg.0.log.old: http://paste.pocoo.org/show/229592/
.xinitrc: http://paste.pocoo.org/show/229590/
Also, since hal is no longer used how should I deal with automounting? Is the ck-launch-session in my .xinitrc still necessary?
Regards.
beat wrote:Bah, I can't believe it was just the reboot. I didn't need it before that's why I didn't try it.
Thanks a lot.
because now in 2.6.34 nouveau is in the kernel tree.
Shouldn't I be able to aumount with udev? (http://wiki.archlinux.org/index.php/Ude … SB_devices)
if you have the goal the really get rid of hal (i don't see why you want that) then it should be the right wiki.
Similar Messages
-
Unable to start xorg after latest nvidia update
Hi,
I have NVIDIA GeForce GTX 750 card. I did update to version 346.47 of nvidia driver and figured out that after reboot SDDM dont start. I disabled login manager and tried to start xorg server manually but without success. I see that there is segmentation fault in log but don't understand where it comes from exectly.
Output of /var/log/Xorg.0.log:
[ 18.250]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 18.251] X Protocol Version 11, Revision 0
[ 18.251] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 18.251] Current Operating System: Linux lolik-pc 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015 x86_64
[ 18.251] Kernel command line: \boot\vmlinuz-linux rw root=UUID=d0592c05-2ed2-4bd2-be47-6a2762e5c3c3 rootfstype=ext4 initrd=boot\initramfs-linux.img
[ 18.252] Build Date: 22 February 2015 12:50:32PM
[ 18.253]
[ 18.253] Current version of pixman: 0.32.6
[ 18.254] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 18.254] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 18.255] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 28 13:33:14 2015
[ 18.260] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 18.261] (==) No Layout section. Using the first Screen section.
[ 18.261] (==) No screen section available. Using defaults.
[ 18.261] (**) |-->Screen "Default Screen Section" (0)
[ 18.261] (**) | |-->Monitor "<default monitor>"
[ 18.261] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 18.261] (==) Automatically adding devices
[ 18.261] (==) Automatically enabling devices
[ 18.261] (==) Automatically adding GPU devices
[ 18.267] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 18.267] Entry deleted from font path.
[ 18.267] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 18.271] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 18.271] Entry deleted from font path.
[ 18.271] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 18.272] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 18.272] Entry deleted from font path.
[ 18.272] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 18.272] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 18.272] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 18.272] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 18.272] (II) Loader magic: 0x815d80
[ 18.272] (II) Module ABI versions:
[ 18.272] X.Org ANSI C Emulation: 0.4
[ 18.272] X.Org Video Driver: 19.0
[ 18.272] X.Org XInput driver : 21.0
[ 18.272] X.Org Server Extension : 9.0
[ 18.273] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 18.273] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 18.273] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 18.273] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 18.273] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 9 paused 0
[ 18.274] (--) PCI: (0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 18.274] (--) PCI:*(0:1:0:0) 10de:1380:1462:3102 rev 162, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 18.274] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 18.274] (II) LoadModule: "glx"
[ 18.275] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 18.342] (II) Module glx: vendor="NVIDIA Corporation"
[ 18.342] compiled for 4.0.2, module version = 1.0.0
[ 18.342] Module class: X.Org Server Extension
[ 18.343] (II) NVIDIA GLX Module 346.47 Thu Feb 19 18:09:07 PST 2015
[ 18.343] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 18.343] loading driver: nvidia
[ 18.343] (==) Matched nvidia as autoconfigured driver 0
[ 18.343] (==) Matched nouveau as autoconfigured driver 1
[ 18.343] (==) Matched nv as autoconfigured driver 2
[ 18.343] (==) Matched intel as autoconfigured driver 3
[ 18.343] (==) Matched nouveau as autoconfigured driver 4
[ 18.343] (==) Matched nv as autoconfigured driver 5
[ 18.343] (==) Matched modesetting as autoconfigured driver 6
[ 18.343] (==) Matched fbdev as autoconfigured driver 7
[ 18.343] (==) Matched vesa as autoconfigured driver 8
[ 18.343] (==) Assigned the driver to the xf86ConfigLayout
[ 18.343] (II) LoadModule: "nvidia"
[ 18.344] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 18.349] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 18.349] compiled for 4.0.2, module version = 1.0.0
[ 18.349] Module class: X.Org Video Driver
[ 18.350] (II) LoadModule: "nouveau"
[ 18.350] (WW) Warning, couldn't open module nouveau
[ 18.350] (II) UnloadModule: "nouveau"
[ 18.350] (II) Unloading nouveau
[ 18.350] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 18.350] (II) LoadModule: "nv"
[ 18.350] (WW) Warning, couldn't open module nv
[ 18.350] (II) UnloadModule: "nv"
[ 18.350] (II) Unloading nv
[ 18.350] (EE) Failed to load module "nv" (module does not exist, 0)
[ 18.350] (II) LoadModule: "intel"
[ 18.350] (WW) Warning, couldn't open module intel
[ 18.350] (II) UnloadModule: "intel"
[ 18.350] (II) Unloading intel
[ 18.350] (EE) Failed to load module "intel" (module does not exist, 0)
[ 18.350] (II) LoadModule: "modesetting"
[ 18.350] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 18.350] (II) Module modesetting: vendor="X.Org Foundation"
[ 18.350] compiled for 1.17.1, module version = 1.17.1
[ 18.350] Module class: X.Org Video Driver
[ 18.350] ABI class: X.Org Video Driver, version 19.0
[ 18.350] (II) LoadModule: "fbdev"
[ 18.350] (WW) Warning, couldn't open module fbdev
[ 18.350] (II) UnloadModule: "fbdev"
[ 18.350] (II) Unloading fbdev
[ 18.350] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 18.350] (II) LoadModule: "vesa"
[ 18.350] (WW) Warning, couldn't open module vesa
[ 18.350] (II) UnloadModule: "vesa"
[ 18.350] (II) Unloading vesa
[ 18.350] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 18.350] (II) NVIDIA dlloader X Driver 346.47 Thu Feb 19 17:47:18 PST 2015
[ 18.350] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 18.351] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 18.351] (++) using VT number 1
[ 18.351] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 18.351] (II) Loading sub module "fb"
[ 18.351] (II) LoadModule: "fb"
[ 18.351] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 18.352] (II) Module fb: vendor="X.Org Foundation"
[ 18.352] compiled for 1.17.1, module version = 1.0.0
[ 18.352] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.352] (II) Loading sub module "wfb"
[ 18.352] (II) LoadModule: "wfb"
[ 18.352] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 18.353] (II) Module wfb: vendor="X.Org Foundation"
[ 18.353] compiled for 1.17.1, module version = 1.0.0
[ 18.353] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.353] (II) Loading sub module "ramdac"
[ 18.353] (II) LoadModule: "ramdac"
[ 18.353] (II) Module "ramdac" already built-in
[ 18.354] (II) modeset(G0): using drv /dev/dri/card1
[ 18.354] (WW) Falling back to old probe method for modesetting
[ 18.354] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 18.354] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 18.354] (==) NVIDIA(0): RGB weight 888
[ 18.354] (==) NVIDIA(0): Default visual is TrueColor
[ 18.354] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 18.354] (**) NVIDIA(0): Enabling 2D acceleration
[ 18.948] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 18.948] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 750 Ti (GM107-A) at PCI:1:0:0 (GPU-0)
[ 18.948] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 18.948] (--) NVIDIA(0): VideoBIOS: 82.07.32.00.18
[ 18.948] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 18.952] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 750 Ti at PCI:1:0:0
[ 18.952] (--) NVIDIA(0): CRT-0
[ 18.952] (--) NVIDIA(0): DELL U2211H (DFP-0) (boot, connected)
[ 18.952] (--) NVIDIA(0): DFP-1
[ 18.952] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 18.952] (--) NVIDIA(0): DELL U2211H (DFP-0): Internal TMDS
[ 18.952] (--) NVIDIA(GPU-0): DELL U2211H (DFP-0): 330.0 MHz maximum pixel clock
[ 18.952] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 18.952] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 18.952] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 18.952] (**) NVIDIA(0): device DELL U2211H (DFP-0) (Using EDID frequencies has
[ 18.952] (**) NVIDIA(0): been enabled on all display devices.)
[ 18.953] (==) NVIDIA(0):
[ 18.953] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 18.953] (==) NVIDIA(0): will be used as the requested mode.
[ 18.953] (==) NVIDIA(0):
[ 18.953] (II) NVIDIA(0): Validated MetaModes:
[ 18.953] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 18.953] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 18.983] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[ 18.983] (--) NVIDIA(0): option
[ 18.983] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[ 18.983] (==) modeset(G0): RGB weight 888
[ 18.983] (==) modeset(G0): Default visual is TrueColor
[ 18.983] (II) Loading sub module "glamoregl"
[ 18.983] (II) LoadModule: "glamoregl"
[ 18.983] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 18.995] (II) Module glamoregl: vendor="X.Org Foundation"
[ 18.995] compiled for 1.17.1, module version = 1.0.0
[ 18.995] ABI class: X.Org ANSI C Emulation, version 0.4
[ 18.995] (II) glamor: OpenGL accelerated X.org driver based.
[ 19.024] (EE)
[ 19.024] (EE) Backtrace:
[ 19.025] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
[ 19.026] (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fc93cef353f]
[ 19.028] (EE) 2: /usr/lib/libX11.so.6 (_XSend+0x2b) [0x7fc932e6a0bb]
[ 19.028] (EE) 3: /usr/lib/libX11.so.6 (_XFlush+0x15) [0x7fc932e6a575]
[ 19.028] (EE) 4: /usr/lib/libX11.so.6 (_XGetRequest+0x65) [0x7fc932e6d055]
[ 19.028] (EE) 5: /usr/lib/libX11.so.6 (XQueryExtension+0x4d) [0x7fc932e605ed]
[ 19.028] (EE) 6: /usr/lib/libX11.so.6 (XInitExtension+0x32) [0x7fc932e54392]
[ 19.028] (EE) 7: /usr/lib/libXext.so.6 (XextAddDisplay+0x4f) [0x7fc932c2338f]
[ 19.028] (EE) 8: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x5f3f7) [0x7fc93322c3d7]
[ 19.028] (EE) 9: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x804) [0x7fc93316ebf4]
[ 19.028] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 19.028] (EE) 10: /usr/lib/libEGL.so.1 (?+0x804) [0x7fc933417ef4]
[ 19.028] (EE) unw_get_proc_name failed: no unwind info found [-10]
[ 19.028] (EE) 11: /usr/lib/libEGL.so.1 (?+0x804) [0x7fc933418924]
[ 19.028] (EE) 12: /usr/lib/libEGL.so.1 (NvEglRegClientApi+0x4f36) [0x7fc933425866]
[ 19.028] (EE) 13: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x99) [0x7fc935930539]
[ 19.029] (EE) 14: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x29ce) [0x7fc935fc7e9e]
[ 19.029] (EE) 15: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
[ 19.029] (EE) 16: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
[ 19.029] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fc93cee0800]
[ 19.029] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
[ 19.029] (EE) 19: ? (?+0x29) [0x29]
[ 19.029] (EE)
[ 19.029] (EE) Segmentation fault at address 0x0
[ 19.029] (EE)
Fatal server error:
[ 19.029] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 19.029] (EE)
[ 19.029] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 19.029] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 19.029] (EE)
[ 19.031] (EE) Server terminated with error (1). Closing log file.
Output of command "lspci -k | grep -A 2 -i "VGA""
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Device d000
Kernel driver in use: i915
01:00.0 VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750 Ti] (rev a2)
Subsystem: Micro-Star International Co., Ltd. [MSI] Device 3102
Kernel driver in use: nvidia
Output of command "modinfo nvidia"
filename: /lib/modules/3.18.6-1-ARCH/extramodules/nvidia.ko.gz
alias: char-major-195-*
version: 346.47
supported: external
license: NVIDIA
alias: pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias: pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias: pci:v000010DEd*sv*sd*bc03sc02i00*
alias: pci:v000010DEd*sv*sd*bc03sc00i00*
depends: drm,i2c-core
vermagic: 3.18.6-1-ARCH SMP preempt mod_unload modversions
parm: NVreg_Mobile:int
parm: NVreg_ResmanDebugLevel:int
parm: NVreg_RmLogonRC:int
parm: NVreg_ModifyDeviceFiles:int
parm: NVreg_DeviceFileUID:int
parm: NVreg_DeviceFileGID:int
parm: NVreg_DeviceFileMode:int
parm: NVreg_RemapLimit:int
parm: NVreg_UpdateMemoryTypes:int
parm: NVreg_InitializeSystemMemoryAllocations:int
parm: NVreg_UsePageAttributeTable:int
parm: NVreg_MapRegistersEarly:int
parm: NVreg_RegisterForACPIEvents:int
parm: NVreg_CheckPCIConfigSpace:int
parm: NVreg_EnablePCIeGen3:int
parm: NVreg_EnableMSI:int
parm: NVreg_MemoryPoolSize:int
parm: NVreg_RegistryDwords:charp
parm: NVreg_RmMsg:charp
parm: NVreg_AssignGpus:charp
In addition, in order to disable sddm I downloaded latest Arch linux installation CD (2015.02.01) but I was unable to start PC with this version. Loading stuck after first 3 lines, after "triggering udevevents".
I had old version 2014.08 and it worked ok.
Thanks,
AlexeyI just wanted to echo eugeneyche's comment. I ran the same steps mentioned by ElectricPrism but that didn't really fix them. I had to add nomodeset to my kernel parameters. I now want to know what's really going on. For the record, this was my backtrace:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): device Ancor Communications Inc ASUS VE278 (DFP-1) (Using
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): EDID frequencies has been enabled on all display
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (**) NVIDIA(0): devices.)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0):
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0): will be used as the requested mode.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) NVIDIA(0):
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): Validated MetaModes:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (--) NVIDIA(0): option
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): RGB weight 888
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (==) modeset(G0): Default visual is TrueColor
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Loading sub module "glamoregl"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) LoadModule: "glamoregl"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Loading /usr/lib/xorg/modules/libglamoregl.so
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) Module glamoregl: vendor="X.Org Foundation"
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: compiled for 1.17.1, module version = 1.0.0
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: ABI class: X.Org ANSI C Emulation, version 0.4
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (II) glamor: OpenGL accelerated X.org driver based.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Backtrace:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x119) [0x5949c9]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 1: /usr/lib/libc.so.6 (__restore_rt+0x0) [0x7fad6053a53f]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 2: /usr/lib/libxcb.so.1 (xcb_writev+0x0) [0x7fad56046100]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 3: /usr/lib/libX11.so.6 (_XSend+0x19e) [0x7fad564b122e]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 4: /usr/lib/libX11.so.6 (_XFlush+0x15) [0x7fad564b1575]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 5: /usr/lib/libX11.so.6 (_XGetRequest+0x65) [0x7fad564b4055]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 6: /usr/lib/libX11.so.6 (XQueryExtension+0x4d) [0x7fad564a75ed]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 7: /usr/lib/libX11.so.6 (XInitExtension+0x32) [0x7fad5649b392]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 8: /usr/lib/libXext.so.6 (XextAddDisplay+0x4f) [0x7fad5626a38f]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 9: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x5f3f7) [0x7fad568733d7]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 10: /usr/lib/libnvidia-glsi.so.346.47 (_nv016glsi+0x804) [0x7fad567b5bf4]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) unw_get_proc_name failed: no unwind info found [-10]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 11: /usr/lib/libEGL.so.1 (?+0x804) [0x7fad56a5eef4]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) unw_get_proc_name failed: no unwind info found [-10]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 12: /usr/lib/libEGL.so.1 (?+0x804) [0x7fad56a5f924]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 13: /usr/lib/libEGL.so.1 (NvEglRegClientApi+0x4f36) [0x7fad56a6c866]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 14: /usr/lib/xorg/modules/libglamoregl.so (glamor_egl_init+0x99) [0x7fad58f77539]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 15: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x29ce) [0x7fad5960ee9e]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 16: /usr/lib/xorg-server/Xorg (InitOutput+0xbcc) [0x47b63c]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 17: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43c9da]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 18: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7fad60527800]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 19: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427039]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) 20: ? (?+0x29) [0x29]
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Segmentation fault at address 0x0
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: Fatal server error:
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Caught signal 11 (Segmentation fault). Server aborting
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: Please consult the The X.Org Foundation support
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: at http://wiki.x.org
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: for help.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Please also check the log file at "/dev/null" for additional information.
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE)
Mar 09 19:57:56 dexter gdm-Xorg-:5[448]: (EE) Server terminated with error (1). Closing log file.
Mar 09 19:57:56 dexter systemd-coredump[449]: Process 448 (Xorg) of user 0 dumped core -
Xorg 7 mod / nvidia / libgl-dri conflict
I run the tesing repo of arch, and want to use xorg modular with nvidia. Although it runs with xf86-input-nv, I'ld like to run the nvidia driver - I think this is the best if you like to have 3D Acceleration, right?
So, as many have mentioned before, I found that nvidia from testing conflicts libgl-dri, that can't be removed as it is a dependency of mesa. Some advices tend to the direction to just remove mesa and libgl-dri, some say you should'nt.
I would like to know how I should act now. I have a clean machine, just installed and set up, and don't want to march in the wrong direction.
RegardsHi, Annette. I have forced pacman to remove libgl-dri and ignore dependencies. It works - but I don't know it that is the way one should go. I don't know waht the xorg package becomes in the end, and how the nvidia package will finally fit to modular. Right now, I think it is a hack.
-
[SOLVED] building xorg-server: libgl & nvidia-utils conflict
Hello!
I somehow feel like I'm totally missing the point, but...
edit: although I think (not sure any more) this was the same procedure when I first compiled xorg-server, I maybe should mention, I'm now using the testing xorg.
I still don't really understand, why I need libgl to build xorg-server. Aren't nvidia-utils supposed to replace that? Is there a way of building xorg-server with nvidia-utils instead of libgl and if yes: are there (dis-/) advantages doing so other than not having to uninstall nvidia-utils while compiling xorg-server?
Or the other way around: Perhaps it's just me, but I feel "funny" having to remove something that's vital to my installation before I can compile something that's vital to my installation, too... so is it really OK to remove nvidia-utils and compile xorg-server without it or am I doing it wrong?
Thank you for enlightening me
Last edited by whoops (2009-04-07 02:20:51)Well AFAIK, The nVIDIA closed source drivers haven't caught up with xorg server 1.6 which is why you need libgl to build xorg-xserver 1.6+. I personally perfer the open source drivers over Fglrx (FireGL and Radeon X) and the closed source nVIDIA drivers as well.
edit: xorg server is 1.6 in testing so if you want to compile from source, and have the closed source nvidia drivers, you would need to compile xorg server 1.5.XX
P.S. You cannot have both, the nvidia drivers and the open source drivers (libgl), running at the same time which is why the nvidia-* packages are to be removed.
Cheers!
Last edited by Neo_The_User (2009-03-30 16:53:28) -
Xorg configuration with nvidia 6800gs agp and flatron l222wt
my computer is set to run with a l222wt lcd monitor with a 1680x1050 native resolution on a nvidia 6800gs vid card through a analog port. for wutever reason, my video settings are no longer being detected by xorg anymore after i install xorg and the nvidia driver. my last arch linux install was fine (i had been using a standard crt at 1280x1024) and when i switched monitors it autodetected the resolution. however, when i went to reinstall linux, it no longer autodetected and i got horrible settings. i tried to use the mode setting under the display subsection to set my resolutiona dn still no go. is their any better way to force it to use my preffered resolution?
thanks
Grama
Last edited by Grama (2008-04-13 19:37:54)well all is working now.... i had not ever edited resolutions using the modeline in the monitor section.... all i needed to do was enter my correct modeline settings and bango correct
as for the ftp install problem i just burned the new 2008.04rc i686 iso and like the arch linux of old it worked once more
thanks
Grama -
[SOLVED] Xorg freeze with nvidia GeForce 210 when resizing terminal
Hello,
I am working on Archlinux. My computer freeze when I resize a terminal window.
To reproduce the problem, I follow the below steps :
1- launch openbox (with tint2, xcompmgr and nitrogen)
2- start the "terminal" console emulator (with true transparent background)
3- launch opera and go to a website which take a while to load (with a lot of data) (I used http://www.lemonde.fr)
4- while the website is loading, switch to the terminal window and double click on the title bar to maximize it
5- the box freeze
I am not able to take the control back. I cannot exit or kill Xorg / Openbox. I cannot switch to a text terminal (ttyx). No key sequence is working.
Only a hard reset of the box is working.
I have tried to disable the transparent background of the terminal window without success.
I have tried to not start xcompmgr without success.
The problem also occurs with rxvt-unicode instead of terminal.
It seems the problem happens more often when using console emulator based on vte.
vte itself has the same issue.
The only workaround I have found is to disable the harware acceleration with the below parameter in the xorg.conf file:
Option "RenderAccel" "true"
The problem with this workaround are poor graphical performances.
Could you please let me know if you have any idea / clue to identify / fix this problem ?
Thanks and regards
uname -a
Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz GenuineIntel GNU/Linux
versions
nvidia 270.41.06-1
nvidia-utils 270.41.06-1
kernel26 2.6.38.4-1
openbox 3.4.11.2-2
xcompmgr 1.1.5-1
.xinitrc
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
exec ck-launch-session openbox-session
.config/openbox/autostart.sh
# This shell script is run before Openbox launches.
# Environment variables set here are passed to the Openbox session.
# Set a background color
BG=""
if which hsetroot >/dev/null 2>&1; then
BG=hsetroot
else
if which esetroot >/dev/null 2>&1; then
BG=esetroot
else
if which xsetroot >/dev/null 2>&1; then
BG=xsetroot
fi
fi
fi
test -z $BG || $BG -solid "#303030"
# D-bus
if which dbus-launch >/dev/null 2>&1 && test -z "$DBUS_SESSION_BUS_ADDRESS"; then
eval `dbus-launch --sh-syntax --exit-with-session`
fi
# Make GTK apps look and behave how they were set up in the gnome config tools
if test -x /usr/libexec/gnome-settings-daemon >/dev/null; then
/usr/libexec/gnome-settings-daemon &
elif which gnome-settings-daemon >/dev/null 2>&1; then
gnome-settings-daemon &
# Make GTK apps look and behave how they were set up in the XFCE config tools
elif which xfce-mcs-manager >/dev/null 2>&1; then
xfce-mcs-manager n &
fi
# Preload stuff for KDE apps
if which start_kdeinit >/dev/null 2>&1; then
LD_BIND_NOW=true start_kdeinit --new-startup +kcminit_startup &
fi
# Run XDG autostart things. By default don't run anything desktop-specific
# See xdg-autostart --help more info
DESKTOP_ENV="OPENBOX"
if which /usr/lib/openbox/xdg-autostart >/dev/null 2>&1; then
/usr/lib/openbox/xdg-autostart $DESKTOP_ENV
fi
xcompmgr &
nitrogen --set-zoom-fill /mnt/data/pictures/flower.jpg &
tint2 &
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "extmod"
Load "glx"
Load "record"
Load "dbe"
Load "dri2"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "fr"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
Option "RenderAccel" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Xorg.0.log
[ 485.566]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 485.566] X Protocol Version 11, Revision 0
[ 485.566] Build Operating System: Linux 2.6.38-ARCH i686
[ 485.566] Current Operating System: Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686
[ 485.566] Kernel command line: root=/dev/sda3 ro
[ 485.566] Build Date: 16 April 2011 12:05:35PM
[ 485.566]
[ 485.566] Current version of pixman: 0.20.2
[ 485.567] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 485.567] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 485.567] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 27 20:00:28 2011
[ 485.567] (==) Using config file: "/etc/X11/xorg.conf"
[ 485.568] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 485.568] (==) ServerLayout "X.org Configured"
[ 485.568] (**) |-->Screen "Screen0" (0)
[ 485.568] (**) | |-->Monitor "Monitor0"
[ 485.568] (**) | |-->Device "Card0"
[ 485.568] (**) |-->Input Device "Mouse0"
[ 485.568] (**) |-->Input Device "Keyboard0"
[ 485.568] (==) Automatically adding devices
[ 485.568] (==) Automatically enabling devices
[ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 485.568] Entry deleted from font path.
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 485.568] Entry deleted from font path.
[ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 485.568] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 485.568] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 485.568] (**) Extension "Composite" is enabled
[ 485.568] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 485.568] (WW) Disabling Mouse0
[ 485.568] (WW) Disabling Keyboard0
[ 485.568] (II) Loader magic: 0x81f4ee0
[ 485.568] (II) Module ABI versions:
[ 485.568] X.Org ANSI C Emulation: 0.4
[ 485.568] X.Org Video Driver: 10.0
[ 485.568] X.Org XInput driver : 12.2
[ 485.568] X.Org Server Extension : 5.0
[ 485.569] (--) PCI:*(0:1:0:0) 10de:0a65:1043:8334 rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[ 485.569] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 485.569] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) "dri" will be loaded by default.
[ 485.569] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 485.569] (II) LoadModule: "extmod"
[ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 485.569] (II) Module extmod: vendor="X.Org Foundation"
[ 485.569] compiled for 1.10.1, module version = 1.0.0
[ 485.569] Module class: X.Org Server Extension
[ 485.569] ABI class: X.Org Server Extension, version 5.0
[ 485.569] (II) Loading extension MIT-SCREEN-SAVER
[ 485.569] (II) Loading extension XFree86-VidModeExtension
[ 485.569] (II) Loading extension XFree86-DGA
[ 485.569] (II) Loading extension DPMS
[ 485.569] (II) Loading extension XVideo
[ 485.569] (II) Loading extension XVideo-MotionCompensation
[ 485.569] (II) Loading extension X-Resource
[ 485.569] (II) LoadModule: "glx"
[ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 485.588] (II) Module glx: vendor="NVIDIA Corporation"
[ 485.588] compiled for 4.0.2, module version = 1.0.0
[ 485.589] Module class: X.Org Server Extension
[ 485.589] (II) NVIDIA GLX Module 270.41.06 Mon Apr 18 15:11:28 PDT 2011
[ 485.589] (II) Loading extension GLX
[ 485.589] (II) LoadModule: "record"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 485.589] (II) Module record: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.13.0
[ 485.589] Module class: X.Org Server Extension
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension RECORD
[ 485.589] (II) LoadModule: "dbe"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 485.589] (II) Module dbe: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.0.0
[ 485.589] Module class: X.Org Server Extension
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension DOUBLE-BUFFER
[ 485.589] (II) LoadModule: "dri2"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 485.589] (II) Module dri2: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.2.0
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension DRI2
[ 485.589] (II) LoadModule: "dri"
[ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 485.589] (II) Module dri: vendor="X.Org Foundation"
[ 485.589] compiled for 1.10.1, module version = 1.0.0
[ 485.589] ABI class: X.Org Server Extension, version 5.0
[ 485.589] (II) Loading extension XFree86-DRI
[ 485.589] (II) LoadModule: "nvidia"
[ 485.589] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 485.590] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 485.590] compiled for 4.0.2, module version = 1.0.0
[ 485.590] Module class: X.Org Video Driver
[ 485.590] (II) NVIDIA dlloader X Driver 270.41.06 Mon Apr 18 14:55:51 PDT 2011
[ 485.590] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 485.590] (--) using VT number 7
[ 485.593] (II) Loading sub module "fb"
[ 485.593] (II) LoadModule: "fb"
[ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 485.593] (II) Module fb: vendor="X.Org Foundation"
[ 485.593] compiled for 1.10.1, module version = 1.0.0
[ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
[ 485.593] (II) Loading sub module "wfb"
[ 485.593] (II) LoadModule: "wfb"
[ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 485.593] (II) Module wfb: vendor="X.Org Foundation"
[ 485.593] compiled for 1.10.1, module version = 1.0.0
[ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
[ 485.593] (II) Loading sub module "ramdac"
[ 485.593] (II) LoadModule: "ramdac"
[ 485.593] (II) Module "ramdac" already built-in
[ 485.593] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 485.593] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 485.593] (==) NVIDIA(0): RGB weight 888
[ 485.593] (==) NVIDIA(0): Default visual is TrueColor
[ 485.593] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 485.593] (**) NVIDIA(0): Option "RenderAccel" "true"
[ 485.593] (**) NVIDIA(0): Enabling RENDER acceleration
[ 485.953] (II) NVIDIA(GPU-0): Display (LG Electronics L222W (CRT-0)) does not support NVIDIA
[ 485.953] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 485.986] (II) NVIDIA(GPU-0): Display (PANASONIC-TV (DFP-1)) does not support NVIDIA 3D
[ 485.986] (II) NVIDIA(GPU-0): Vision stereo.
[ 485.987] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
[ 485.987] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 485.987] (--) NVIDIA(0): VideoBIOS: 70.18.39.00.17
[ 485.987] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 485.987] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 485.987] (--) NVIDIA(0): Connected display device(s) on GeForce 210 at PCI:1:0:0
[ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0)
[ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1)
[ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0): 400.0 MHz maximum pixel clock
[ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): 165.0 MHz maximum pixel clock
[ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): Internal Single Link TMDS
[ 486.026] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 486.026] (==) NVIDIA(0):
[ 486.026] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 486.026] (==) NVIDIA(0): will be used as the requested mode.
[ 486.026] (==) NVIDIA(0):
[ 486.026] (II) NVIDIA(0): Validated modes:
[ 486.026] (II) NVIDIA(0): "nvidia-auto-select"
[ 486.026] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 486.054] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 486.054] (--) NVIDIA(0): option
[ 486.054] (--) Depth 24 pixmap format is 32 bpp
[ 486.054] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 486.056] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 486.056] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 486.056] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 486.056] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 486.056] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 486.056] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 486.056] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 486.056] (II) NVIDIA(0): Config Options in the README.
[ 486.058] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 486.286] (II) Loading extension NV-GLX
[ 486.314] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 486.314] (==) NVIDIA(0): Backing store disabled
[ 486.314] (==) NVIDIA(0): Silken mouse enabled
[ 486.314] (==) NVIDIA(0): DPMS enabled
[ 486.314] (II) Loading extension NV-CONTROL
[ 486.315] (II) Loading extension XINERAMA
[ 486.315] (II) Loading sub module "dri2"
[ 486.315] (II) LoadModule: "dri2"
[ 486.315] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 486.315] (II) Module dri2: vendor="X.Org Foundation"
[ 486.315] compiled for 1.10.1, module version = 1.2.0
[ 486.315] ABI class: X.Org Server Extension, version 5.0
[ 486.315] (II) NVIDIA(0): [DRI2] Setup complete
[ 486.315] (==) RandR enabled
[ 486.315] (II) Initializing built-in extension Generic Event Extension
[ 486.315] (II) Initializing built-in extension SHAPE
[ 486.315] (II) Initializing built-in extension MIT-SHM
[ 486.315] (II) Initializing built-in extension XInputExtension
[ 486.315] (II) Initializing built-in extension XTEST
[ 486.315] (II) Initializing built-in extension BIG-REQUESTS
[ 486.315] (II) Initializing built-in extension SYNC
[ 486.315] (II) Initializing built-in extension XKEYBOARD
[ 486.315] (II) Initializing built-in extension XC-MISC
[ 486.315] (II) Initializing built-in extension SECURITY
[ 486.315] (II) Initializing built-in extension XINERAMA
[ 486.315] (II) Initializing built-in extension XFIXES
[ 486.315] (II) Initializing built-in extension RENDER
[ 486.315] (II) Initializing built-in extension RANDR
[ 486.315] (II) Initializing built-in extension COMPOSITE
[ 486.315] (II) Initializing built-in extension DAMAGE
[ 486.317] (II) Initializing extension GLX
[ 486.364] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 486.364] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 486.364] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 486.364] (II) LoadModule: "evdev"
[ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.365] (II) Module evdev: vendor="X.Org Foundation"
[ 486.365] compiled for 1.10.0, module version = 2.6.0
[ 486.365] Module class: X.Org XInput Driver
[ 486.365] ABI class: X.Org XInput driver, version 12.2
[ 486.365] (II) Using input driver 'evdev' for 'Power Button'
[ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.365] (**) Power Button: always reports core events
[ 486.365] (**) Power Button: Device: "/dev/input/event1"
[ 486.376] (--) Power Button: Found keys
[ 486.376] (II) Power Button: Configuring as keyboard
[ 486.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 486.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 486.376] (**) Option "xkb_rules" "evdev"
[ 486.376] (**) Option "xkb_model" "evdev"
[ 486.376] (**) Option "xkb_layout" "fr"
[ 486.397] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 486.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 486.397] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 486.397] (II) Using input driver 'evdev' for 'Power Button'
[ 486.397] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.397] (**) Power Button: always reports core events
[ 486.397] (**) Power Button: Device: "/dev/input/event0"
[ 486.413] (--) Power Button: Found keys
[ 486.413] (II) Power Button: Configuring as keyboard
[ 486.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 486.413] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 486.413] (**) Option "xkb_rules" "evdev"
[ 486.413] (**) Option "xkb_model" "evdev"
[ 486.413] (**) Option "xkb_layout" "fr"
[ 486.415] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event2)
[ 486.415] (II) No input driver/identifier specified (ignoring)
[ 486.418] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
[ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
[ 486.418] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 486.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.418] (**) Microsoft Wired Keyboard 600: always reports core events
[ 486.418] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
[ 486.430] (--) Microsoft Wired Keyboard 600: Found keys
[ 486.430] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 486.430] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.0/input/input3/event3"
[ 486.430] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 486.430] (**) Option "xkb_rules" "evdev"
[ 486.430] (**) Option "xkb_model" "evdev"
[ 486.430] (**) Option "xkb_layout" "fr"
[ 486.430] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
[ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
[ 486.430] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 486.430] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.430] (**) Microsoft Wired Keyboard 600: always reports core events
[ 486.430] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
[ 486.446] (--) Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 486.446] (--) Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 486.446] (--) Microsoft Wired Keyboard 600: Found relative axes
[ 486.446] (--) Microsoft Wired Keyboard 600: Found absolute axes
[ 486.446] (--) Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 486.446] (--) Microsoft Wired Keyboard 600: Found keys
[ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as mouse
[ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
[ 486.446] (II) Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 486.446] (**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 486.446] (**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 486.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.1/input/input4/event4"
[ 486.446] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
[ 486.446] (**) Option "xkb_rules" "evdev"
[ 486.446] (**) Option "xkb_model" "evdev"
[ 486.446] (**) Option "xkb_layout" "fr"
[ 486.447] (EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
[ 486.447] (WW) Microsoft Wired Keyboard 600: found 37 axes, limiting to 36.
[ 486.447] (II) Microsoft Wired Keyboard 600: initialized for absolute axes.
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 486.447] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 486.447] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
[ 486.447] (II) No input driver/identifier specified (ignoring)
[ 486.447] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[ 486.447] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 486.447] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 486.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 486.447] (**) Logitech USB Optical Mouse: always reports core events
[ 486.447] (**) Logitech USB Optical Mouse: Device: "/dev/input/event5"
[ 486.473] (--) Logitech USB Optical Mouse: Found 12 mouse buttons
[ 486.473] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
[ 486.473] (--) Logitech USB Optical Mouse: Found relative axes
[ 486.473] (--) Logitech USB Optical Mouse: Found x and y relative axes
[ 486.473] (II) Logitech USB Optical Mouse: Configuring as mouse
[ 486.473] (II) Logitech USB Optical Mouse: Adding scrollwheel support
[ 486.473] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 486.473] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 486.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.0/input/input5/event5"
[ 486.473] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
[ 486.473] (II) Logitech USB Optical Mouse: initialized for relative axes.
[ 486.473] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 486.473] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 486.473] (II) No input driver/identifier specified (ignoring)
[ 525.530] (WW) NVIDIA(0): The NVIDIA X driver has encountered too many errors. Falling
[ 525.530] (WW) NVIDIA(0): back to write-back cached memory.
dmesg.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110415 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
[ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5B-Deluxe, BIOS 1238 09/30/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 7fdd0000 - 7ff80000
[ 0.000000] Allocated new RAMDISK: 3764e000 - 377fd262
[ 0.000000] Move RAMDISK from 000000007fdd0000 - 000000007ff7f261 to 3764e000 - 377fd261
[ 0.000000] ACPI: RSDP 000fae70 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 7ff90100 0004C (v01 MSTEST OEMXSDT 09000830 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ff90290 000F4 (v03 MSTEST OEMFACP 09000830 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113)
[ 0.000000] ACPI: FACS 7ff9e000 00040
[ 0.000000] ACPI: APIC 7ff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097)
[ 0.000000] ACPI: HPET 7ff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1159MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007ff90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ff90
[ 0.000000] On node 0 totalpages: 524062
[ 0.000000] free_area_init_node: node 0, pgdat c1450b00, node_mem_map f664d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3950 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2320 pages used for memmap
[ 0.000000] HighMem zone: 294530 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27392 r0 d21760 u1048576
[ 0.000000] pcpu-alloc: s27392 r0 d21760 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519966
[ 0.000000] Kernel command line: root=/dev/sda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 10483200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff90)
[ 0.000000] Memory: 2061020k/2096704k available (3182k kernel code, 35228k reserved, 1259k data, 424k init, 1187400k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1457000 - 0xc14c1000 ( 424 kB)
[ 0.000000] .data : 0xc131bacb - 0xc1456a00 (1259 kB)
[ 0.000000] .text : 0xc1000000 - 0xc131bacb (3182 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:512
[ 0.000000] CPU 0 irqstacks, hard=f500c000 soft=f500e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3066.221 MHz processor.
[ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6134.96 BogoMIPS (lpj=10220736)
[ 0.003418] pid_max: default: 32768 minimum: 301
[ 0.003486] Security Framework initialized
[ 0.003528] AppArmor: AppArmor disabled by boot time parameter
[ 0.006682] Mount-cache hash table entries: 512
[ 0.006865] Initializing cgroup subsys ns
[ 0.006906] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.006960] Initializing cgroup subsys cpuacct
[ 0.007007] Initializing cgroup subsys memory
[ 0.007052] Initializing cgroup subsys devices
[ 0.007092] Initializing cgroup subsys freezer
[ 0.007133] Initializing cgroup subsys net_cls
[ 0.007172] Initializing cgroup subsys blkio
[ 0.007238] CPU: Physical Processor ID: 0
[ 0.007277] CPU: Processor Core ID: 0
[ 0.007317] mce: CPU supports 6 MCE banks
[ 0.007361] CPU0: Thermal monitoring enabled (TM2)
[ 0.007402] using mwait in idle threads.
[ 0.008216] ACPI: Core revision 20110112
[ 0.013386] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013726] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.046907] CPU0: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz stepping 0a
[ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.049997] ... version: 2
[ 0.049997] ... bit width: 40
[ 0.049997] ... generic registers: 2
[ 0.049997] ... value mask: 000000ffffffffff
[ 0.049997] ... max period: 000000007fffffff
[ 0.049997] ... fixed-purpose events: 3
[ 0.049997] ... event mask: 0000000700000003
[ 0.056745] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.070012] CPU 1 irqstacks, hard=f50d6000 soft=f50d8000
[ 0.070017] Booting Node 0, Processors #1
[ 0.006666] Initializing CPU#1
[ 0.166676] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.169997] Brought up 2 CPUs
[ 0.170040] Total of 2 processors activated (12270.81 BogoMIPS).
[ 0.171248] devtmpfs: initialized
[ 0.171248] NET: Registered protocol family 16
[ 0.171248] ACPI: bus type pci registered
[ 0.171248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.171248] PCI: not using MMCONFIG
[ 0.171248] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.171248] PCI: Using configuration type 1 for base access
[ 0.171248] bio: create slab <bio-0> at 0
[ 0.173388] ACPI: EC: Look up EC in DSDT
[ 0.174194] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.179022] ACPI: SSDT 7ff9e0c0 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.179316] ACPI: Dynamic OEM Table Load:
[ 0.179408] ACPI: SSDT (null) 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.179643] ACPI: SSDT 7ff9e2d0 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.179932] ACPI: Dynamic OEM Table Load:
[ 0.180025] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.180248] ACPI: Interpreter enabled
[ 0.180292] ACPI: (supports S0 S3 S4 S5)
[ 0.180445] ACPI: Using IOAPIC for interrupt routing
[ 0.180500] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.180904] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.180958] PCI: Using MMCONFIG for extended config space
[ 0.185933] ACPI: No dock devices found.
[ 0.185973] HEST: Table not found.
[ 0.186014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.186114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.186260] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.186304] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.186346] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.186398] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.186450] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
[ 0.186509] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
[ 0.186539] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
[ 0.186562] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.186564] pci 0000:00:01.0: PME# disabled
[ 0.186592] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.186625] pci 0000:00:1a.0: reg 20: [io 0xa880-0xa89f]
[ 0.186660] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.186692] pci 0000:00:1a.1: reg 20: [io 0xac00-0xac1f]
[ 0.186724] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.186740] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
[ 0.186797] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.186801] pci 0000:00:1a.7: PME# disabled
[ 0.186817] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.186829] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 0.186873] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.186876] pci 0000:00:1b.0: PME# disabled
[ 0.186891] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.186935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.186938] pci 0000:00:1c.0: PME# disabled
[ 0.186956] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.187000] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.187003] pci 0000:00:1c.4: PME# disabled
[ 0.187019] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
[ 0.187063] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.187066] pci 0000:00:1c.5: PME# disabled
[ 0.187082] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.187114] pci 0000:00:1d.0: reg 20: [io 0xa400-0xa41f]
[ 0.187137] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.187170] pci 0000:00:1d.1: reg 20: [io 0xa480-0xa49f]
[ 0.187193] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.187226] pci 0000:00:1d.2: reg 20: [io 0xa800-0xa81f]
[ 0.187256] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.187272] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
[ 0.187329] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.187333] pci 0000:00:1d.7: PME# disabled
[ 0.187346] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.187393] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
[ 0.187462] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.188664] pci 0000:00:1f.2: [8086:2821] type 0 class 0x000106
[ 0.188677] pci 0000:00:1f.2: reg 10: [io 0xa080-0xa087]
[ 0.188684] pci 0000:00:1f.2: reg 14: [io 0xa000-0xa003]
[ 0.188690] pci 0000:00:1f.2: reg 18: [io 0x9c00-0x9c07]
[ 0.188696] pci 0000:00:1f.2: reg 1c: [io 0x9880-0x9883]
[ 0.188703] pci 0000:00:1f.2: reg 20: [io 0x9800-0x981f]
[ 0.188709] pci 0000:00:1f.2: reg 24: [mem 0xf9fff000-0xf9fff7ff]
[ 0.188733] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.188736] pci 0000:00:1f.2: PME# disabled
[ 0.188747] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.188756] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.188778] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.188824] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300
[ 0.188832] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.188841] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.188849] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.188856] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f]
[ 0.188862] pci 0000:01:00.0: reg 30: [mem 0xfbc00000-0xfbc7ffff pref]
[ 0.188895] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
[ 0.188903] pci 0000:01:00.1: reg 10: [mem 0xfbcfc000-0xfbcfffff]
[ 0.188969] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.189011] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.189014] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.189017] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.189048] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.189091] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.189094] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.189098] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.189144] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.189223] pci 0000:03:00.0: reg 24: [mem 0xfbefe000-0xfbefffff]
[ 0.189236] pci 0000:03:00.0: reg 30: [mem 0xfbee0000-0xfbeeffff pref]
[ 0.189263] pci 0000:03:00.0: PME# supported from D3hot
[ 0.189268] pci 0000:03:00.0: PME# disabled
[ 0.189293] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.189315] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07]
[ 0.189327] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883]
[ 0.189339] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807]
[ 0.189351] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483]
[ 0.189363] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f]
[ 0.189426] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.189491] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.189533] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.189536] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.189540] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.189589] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
[ 0.189609] pci 0000:02:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 0.189620] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff]
[ 0.189658] pci 0000:02:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 0.189693] pci 0000:02:00.0: supports D1 D2
[ 0.189694] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.189698] pci 0000:02:00.0: PME# disabled
[ 0.193338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.193385] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.193390] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.193397] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.193434] pci 0000:05:02.0: [1033:0035] type 0 class 0x000c03
[ 0.193452] pci 0000:05:02.0: reg 10: [mem 0xfbffd000-0xfbffdfff]
[ 0.193514] pci 0000:05:02.0: supports D1 D2
[ 0.193516] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot
[ 0.193519] pci 0000:05:02.0: PME# disabled
[ 0.193533] pci 0000:05:02.1: [1033:0035] type 0 class 0x000c03
[ 0.193546] pci 0000:05:02.1: reg 10: [mem 0xfbffe000-0xfbffefff]
[ 0.193601] pci 0000:05:02.1: supports D1 D2
[ 0.193602] pci 0000:05:02.1: PME# supported from D0 D1 D2 D3hot
[ 0.193605] pci 0000:05:02.1: PME# disabled
[ 0.193619] pci 0000:05:02.2: [1033:00e0] type 0 class 0x000c03
[ 0.193633] pci 0000:05:02.2: reg 10: [mem 0xfbfffc00-0xfbfffcff]
[ 0.193687] pci 0000:05:02.2: supports D1 D2
[ 0.193689] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
[ 0.193692] pci 0000:05:02.2: PME# disabled
[ 0.193711] pci 0000:05:03.0: [104c:8023] type 0 class 0x000c00
[ 0.193726] pci 0000:05:03.0: reg 10: [mem 0xfbfff000-0xfbfff7ff]
[ 0.193735] pci 0000:05:03.0: reg 14: [mem 0xfbff8000-0xfbffbfff]
[ 0.193786] pci 0000:05:03.0: supports D1 D2
[ 0.193787] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.193791] pci 0000:05:03.0: PME# disabled
[ 0.193806] pci 0000:05:04.0: [11ab:4320] type 0 class 0x000200
[ 0.193823] pci 0000:05:04.0: reg 10: [mem 0xfbff4000-0xfbff7fff]
[ 0.193831] pci 0000:05:04.0: reg 14: [io 0xe800-0xe8ff]
[ 0.193867] pci 0000:05:04.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
[ 0.193886] pci 0000:05:04.0: supports D1 D2
[ 0.193888] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193891] pci 0000:05:04.0: PME# disabled
[ 0.193926] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.193971] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.193974] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.193978] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.193980] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.193982] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.193983] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.193985] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.193987] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
[ 0.194003] pci_bus 0000:00: on NUMA node 0
[ 0.194005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.194127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.194156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.194243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.194277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.194313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.194355] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.199969] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.200342] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.200724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.201105] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.201486] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.201868] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.202249] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.202634] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.203051] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.203107] vgaarb: loaded
[ 0.203206] PCI: Using ACPI for IRQ routing
[ 0.203247] PCI: pci_cache_line_size set to 64 bytes
[ 0.203358] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 0.203360] reserve RAM buffer: 000000007ff90000 - 000000007fffffff
[ 0.203439] NetLabel: Initializing
[ 0.203478] NetLabel: domain hash size = 128
[ 0.203518] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.203565] NetLabel: unlabeled traffic allowed by default
[ 0.203608] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.203653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.203797] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.210012] Switching to clocksource hpet
[ 0.211034] pnp: PnP ACPI init
[ 0.211084] ACPI: bus type pnp registered
[ 0.211173] pnp 00:00: [bus 00-ff]
[ 0.211175] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.211177] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.211179] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.211180] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.211182] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.211184] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.211222] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.211229] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.211267] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.211311] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.211335] pnp 00:02: [dma 4]
[ 0.211337] pnp 00:02: [io 0x0000-0x000f]
[ 0.211338] pnp 00:02: [io 0x0081-0x0083]
[ 0.211339] pnp 00:02: [io 0x0087]
[ 0.211341] pnp 00:02: [io 0x0089-0x008b]
[ 0.211342] pnp 00:02: [io 0x008f]
[ 0.211343] pnp 00:02: [io 0x00c0-0x00df]
[ 0.211367] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.211374] pnp 00:03: [io 0x0070-0x0071]
[ 0.211380] pnp 00:03: [irq 8]
[ 0.211403] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.211412] pnp 00:04: [io 0x0061]
[ 0.211435] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.211441] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.211444] pnp 00:05: [irq 13]
[ 0.211469] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.211669] pnp 00:06: [irq 4]
[ 0.211671] pnp 00:06: [dma 0 disabled]
[ 0.211672] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.211721] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.211835] pnp 00:07: [io 0x0000-0xffffffff disabled]
[ 0.211837] pnp 00:07: [io 0x0000-0xffffffff disabled]
[ 0.211838] pnp 00:07: [io 0x0290-0x0297]
[ 0.211879] system 00:07: [io 0x0290-0x0297] has been reserved
[ 0.211922] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.211997] pnp 00:08: [io 0x0010-0x001f]
[ 0.211999] pnp 00:08: [io 0x0022-0x003f]
[ 0.212000] pnp 00:08: [io 0x0044-0x005f]
[ 0.212002] pnp 00:08: [io 0x0062-0x0063]
[ 0.212003] pnp 00:08: [io 0x0065-0x006f]
[ 0.212004] pnp 00:08: [io 0x0072-0x007f]
[ 0.212006] pnp 00:08: [io 0x0080]
[ 0.212007] pnp 00:08: [io 0x0084-0x0086]
[ 0.212008] pnp 00:08: [io 0x0088]
[ 0.212010] pnp 00:08: [io 0x008c-0x008e]
[ 0.212011] pnp 00:08: [io 0x0090-0x009f]
[ 0.212012] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.212014] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.212015] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.212016] pnp 00:08: [io 0x0800-0x087f]
[ 0.212018] pnp 00:08: [io 0x0400-0x03ff disabled]
[ 0.212019] pnp 00:08: [io 0x0480-0x04bf]
[ 0.212021] pnp 00:08: [mem 0xffafe000-0xffb0cbff]
[ 0.212022] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.212024] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.212025] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
[ 0.212026] pnp 00:08: [mem 0xfff00000-0xfffffffe]
[ 0.212028] pnp 00:08: [mem 0xfebfe000-0xfebfec00]
[ 0.212089] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.212132] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.212174] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.212216] system 00:08: [mem 0xffafe000-0xffb0cbff] could not be reserved
[ 0.212259] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.212302] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.212345] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.212388] system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved
[ 0.212430] system 00:08: [mem 0xfebfe000-0xfebfec00] has been reserved
[ 0.212473] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212521] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.212547] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.212580] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.212581] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.212625] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.212668] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.212712] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212761] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.212801] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.212844] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.212967] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.212969] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.212971] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.212972] pnp 00:0c: [mem 0x00100000-0x7fffffff]
[ 0.212974] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
[ 0.213025] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.213068] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.213111] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.213154] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.213198] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.213198] Switched to NOHz mode on CPU #0
[ 0.213237] Switched to NOHz mode on CPU #1
[ 0.213286] pnp: PnP ACPI: found 13 devices
[ 0.213326] ACPI: ACPI bus type pnp unregistered
[ 0.249481] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
[ 0.249526] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.249579] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.249632] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.249675] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80800000-0x808000ff]
[ 0.249720] pci 0000:00:1f.3: BAR 0: set to [mem 0x80800000-0x808000ff] (PCI address [0x80800000-0x808000ff])
[ 0.249775] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.249816] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.249859] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
[ 0.249902] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.249956] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.250011] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.250055] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff]
[ 0.250099] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.250154] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.250195] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.250239] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.250283] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.250338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.250380] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.250424] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.250468] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.250523] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.250565] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.250609] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.250653] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.250702] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.250746] pci 0000:00:01.0: setting latency timer to 64
[ 0.250750] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.250792] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.250836] pci 0000:00:1c.0: setting latency timer to 64
[ 0.250840] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.250884] pci 0000:00:1c.4: setting latency timer to 64
[ 0.250890] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.250933] pci 0000:00:1c.5: setting latency timer to 64
[ 0.250938] pci 0000:00:1e.0: setting latency timer to 64
[ 0.250941] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.250943] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.250944] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.250946] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.250948] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[ 0.250949] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.250951] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbcfffff]
[ 0.250953] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[ 0.250955] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.250956] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff]
[ 0.250958] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.250960] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.250961] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.250963] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.250965] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.250966] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.250968] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.250970] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
[ 0.250972] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.250973] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.250975] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.250977] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.250978] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.250980] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
[ 0.251002] NET: Registered protocol family 2
[ 0.251085] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.251263] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.251592] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.251779] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.251822] TCP reno registered
[ 0.251861] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.251907] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.252025] NET: Registered protocol family 1
[ 0.295104] pci 0000:01:00.0: Boot video device
[ 0.295141] PCI: CLS 32 bytes, default 64
[ 0.295174] Unpacking initramfs...
[ 0.317387] Freeing initrd memory: 1728k freed
[ 0.318002] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 0.318046] apm: disabled - APM is not SMP safe.
[ 0.318193] audit: initializing netlink socket (disabled)
[ 0.318243] type=2000 audit(1303935493.316:1): initialized
[ 0.318520] highmem bounce pool size: 64 pages
[ 0.318562] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.320047] VFS: Disk quotas dquot_6.5.2
[ 0.320145] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.320261] msgmni has been set to 1709
[ 0.320435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.320488] io scheduler noop registered
[ 0.320527] io scheduler deadline registered
[ 0.320574] io scheduler cfq registered (default)
[ 0.320710] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.320734] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.320771] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.320798] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.320848] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.320875] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.320923] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.320950] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.321092] intel_idle: MWAIT substates: 0x22220
[ 0.321094] intel_idle: does not run on family 6 model 23
[ 0.321105] ERST: Table is not found!
[ 0.321155] isapnp: Scanning for PnP cards...
[ 0.676796] isapnp: No Plug & Play device found
[ 0.676877] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.697390] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.920667] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.973728] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.976563] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.976631] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.976752] mousedev: PS/2 mouse device common for all mice
[ 0.976847] rtc_cmos 00:03: RTC can wake from S4
[ 1.000070] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.000137] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.000200] cpuidle: using governor ladder
[ 1.000240] cpuidle: using governor menu
[ 1.000436] TCP cubic registered
[ 1.000476] NET: Registered protocol family 17
[ 1.000521] Registering the dns_resolver key type
[ 1.000569] Using IPI No-Shortcut mode
[ 1.000679] PM: Hibernation image not present or could not be loaded.
[ 1.000682] registered taskstats version 1
[ 1.001054] rtc_cmos 00:03: setting system clock to 2011-04-27 20:18:14 UTC (1303935494)
[ 1.001128] Initalizing network drop monitor service
[ 1.001211] Freeing unused kernel memory: 424k freed
[ 1.005982] <30>udev[38]: starting version 167
[ 1.107427] SCSI subsystem initialized
[ 1.127245] libata version 3.00 loaded.
[ 1.131006] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.131057] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.131134] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.131436] scsi0 : pata_jmicron
[ 1.131554] scsi1 : pata_jmicron
[ 1.132024] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.132068] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.142526] ahci 0000:00:1f.2: version 3.0
[ 1.142536] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.142608] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.142644] ahci: SSS flag set, parallel bus scan disabled
[ 1.142711] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 1.142765] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 1.142819] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.174032] scsi2 : ahci
[ 1.174136] scsi3 : ahci
[ 1.174235] scsi4 : ahci
[ 1.174335] scsi5 : ahci
[ 1.174434] scsi6 : ahci
[ 1.174532] scsi7 : ahci
[ 1.174699] ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 44
[ 1.174752] ata4: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 44
[ 1.174804] ata5: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff200 irq 44
[ 1.174856] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff280 irq 44
[ 1.174908] ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff300 irq 44
[ 1.174960] ata8: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 44
[ 1.175036] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level,Hi jasonwryan,
Your thread helps a lot. I saw a lot of posts but not this one.
This workaround is fine for me to wait the fix.
Thanks a lot
Workaround :
It seems the problem might be linked to transparent items like background.
As explained in the above thread :
According to the bug report the nVidia driver is freaking out and creating too many events, which causes an event buffer in Xorg to overflow. It works OK with the older Xorg, though.
So the temporary solution is to downgrade 3 packages.
Install the tool to downgrade
> yaourt -Sy downgrade
Downgrade
Note the item number can change
> downgrade xf86-input-evdev
Hit "s" key
Choose 2 (xf86-input-evdev-2.6.0-2-i686.pkg.tar.xz)
> downgrade xorg-server
Hit "s" key
Choose 1 (xorg-server-1.9.4.901-1-i686.pkg.tar.xz)
> downgrade xorg-server-common
Hit "s" key
Choose 1 (xorg-server-common-1.9.4.901-1-i686.pkg.tar.xz)
Be carefull : don't update these 3 packages when updating your system (pacman -Syu) since it is not fixed.
Last edited by shefla (2011-04-27 22:36:37) -
Xorg 1.6, nvidia and screen resolutions
I just upgraded to xorg 1.6 from testing, including the nvidia drivers and kernel from testing. Everything is working great (and it fixed the libxi keyboard layout problems I was having), except that I can no longer select the screen resolution I want from the nvidia-settings application. The set of resolutions is very limited and I'm getting a horizontal stretch due to an incorrect aspect ratio.
I've tried manually adjusting the xorg.conf file after saving it in nvidia-settings, but it makes a mess of the file and I couldn't get it working. Does anybody know how to add screen resolutions into the nvidia-settings application?
Thank you!
DarinHappened to me with most recent 1.5 update, I downgraded back to previous one to get working again. And now same happened with 1.6, this time I downgrade again without any further testing until someone else gets it solved
-
Xorg 1.6, nvidia brokenness w/ dual monitors [SOLVED]
Hi,
I upgraded this past week to xorg-server 1.6.1-1, nvidia 180.44-1, and kernel26 2.6.29.1-4. When I rebooted today I found a few things are broken:
I have a laptop and external monitor dual screen setup where each screen is a separate x screen, as setup by nvidia-settings. After upgrading if I hold down any key for half a second or more (to trigger key repeat), my display on both monitors goes black and my mouse and keyboard stop responding (can't switch terminals, can't kill x...). Resuming from xscreensaver also triggers this same problem.
Another oddity is that when I move my mouse cursor from one monitor to the other a lingering "copy" of the cursor stays on the monitor I just move away from at the transition point to the other monitor.
If I physically disconnect my external monitor (w/o changing xorg.conf) X displays none of the problems listed above.
My xorg.conf is below. Most of it is probably not useful, although I should point out that I have input hotplugging disabled w/ AutoAddDevices false:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder57) Thu Jul 17 18:40:12 PDT 2008
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Jun 5 00:10:21 PDT 2008
# Auto-generated by Archie mkxcfg
# Auto-generated by Archie mkxcfg
Section "ServerLayout"
# PS/2 Mouse not detected
# Serial Mouse not detected
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
Option "Xinerama" "true"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
FontPath "/usr/share/fonts/local"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "synaptics"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "Xinerama" "1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "0"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "0"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "Emulate3Buttons" "on"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LPL"
HorizSync 30.0 - 75.0
VertRefresh 60.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
Option "NoLogo" "true"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce Go 7300"
BusID "PCI:1:0:0"
Screen 0
Option "NoLogo" "true"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce Go 7300"
BusID "PCI:1:0:0"
Screen 1
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "metamodes" "DFP-0: 1280x800 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 800x600 +0+0; DFP-0: 640x480 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "False"
EndSection
Any help would be greatly appreciated!
Last edited by nonexistent (2009-04-23 01:54:18)have you looked at /var/log/xorg.0.log for warnings and errors?
you need to get rid of ..
Load "type1"
Load "freetype"
If you want independent X screens you need to get rid of..
Option "Xinerama" "1"
or change "1" to "0" or "false"
For two screens you should only need two device sections and you have three.
Alot of people are having good results with a minimal xorg.conf with the new xorg-server. I can't really say too much about it as I still use my xorg.conf, although I could probably cut it down quite a bit.
It looks like your xorg.conf needs a lot of tweaking. Or you could just delete most everything in it and let autoconfig do it's thing. Then just add little by little till you get everything working.
Not sure how much it will help because i'm not using a laptop, but rather a desktop, but here's my working xorg.conf set up with nvidia and three seperate X screens.
# Xorg configuration file altered by Leigh
# Updated (Dec 2008)
# Three independent screens
# Three cards... (GeForce7900 PCI-E, GeForce6800 PCI-E, GeForce4 MX PCI)
# Monitors... (Two Dell 2005 FPW's, One NEC MultiSync FE1250+ CRT)
# Note: (Due to GeForce4 MX, I need to use the legacy nvidia drivers, nvidia-96xx.)
Section "ServerLayout"
Identifier "Multihead Layout"
Screen "Screen1" 0 0
Screen "Screen2" RightOf "Screen1"
Screen "Screen3" LeftOf "Screen1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
Option "AutoAddDevices" "false"
Option "AllowEmptyInput" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/msttf"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Chinese"
FontPath "/usr/share/fonts/asian-misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/artwiz-fonts"
FontPath "/usr/share/fonts/speedo"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/handwritten"
FontPath "/usr/share/fonts/script"
FontPath "/usr/share/emacs/fonts"
EndSection
Section "Module"
Load "dbe"
Load "v4l"
Load "ddc"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Buttons" "7"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "DELL"
ModelName "Dell 2005FPW"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
ModeLine "1680x1050" 119.0 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync
Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "DELL"
ModelName "Dell 2005FPW"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
ModeLine "1680x1050" 119.0 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync
Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor3"
VendorName "NEC"
ModelName "NEC MultiSync FE1250"
HorizSync 31.0 - 110.0
VertRefresh 50.0 - 160.0
ModeLine "1280x1024" 80.0 1280 1296 1512 1568 1024 1025 1037 1165 interlace
ModeLine "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -hsync -vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1280x1024" 181.8 1280 1312 1440 1696 1024 1031 1046 1072 -hsync -vsync
Option "dpms"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce7900"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce6800"
BusID "PCI:4:0:0"
EndSection
Section "Device"
Identifier "Device3"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce4 MX 440"
BusID "PCI:3:4:0"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "UseDisplayDevice" "DFP-0"
Option "IgnoreDisplayDevices" "TV-0"
Option "NvAGP" "3"
Option "RenderAccel" "true"
Option "AllowDDCCI" "true"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "UseEdidFreqs" "true"
Option "UseEdidDpi" "false"
Option "DPI" "98 x 97"
Option "HWCursor" "true"
SubSection "Display"
Depth 8
Modes "1680x1050" "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "UseDisplayDevice" "DFP-0"
Option "IgnoreDisplayDevices" "TV-0"
Option "NvAGP" "3"
Option "RenderAccel" "true"
Option "AllowDDCCI" "true"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "UseEdidFreqs" "true"
Option "UseEdidDpi" "false"
Option "DPI" "98 x 97"
Option "HWCursor" "true"
SubSection "Display"
Depth 8
Modes "1680x1050" "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "Device3"
Monitor "Monitor3"
DefaultDepth 24
Option "UseDisplayDevice" "CRT-0"
Option "IgnoreDisplayDevices" "TV-0"
Option "NvAGP" "3"
Option "RenderAccel" "true"
Option "AllowDDCCI" "true"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "UseEdidFreqs" "true"
Option "UseEdidDpi" "false"
Option "DPI" "96 x 96"
Option "HWCursor" "true"
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "true"
EndSection
Last edited by Leigh (2009-04-22 10:04:56) -
Hey guys!
Yesterday, I upgraded to the new xorg 1.8.0.901-1 with nvidia 195.36.24-1 and nvidia-utils 195.36.24-2, but in some sites the scrolling is veeeeery slow (using the scroll bar, with the mouse wheel it's better, but not 100%), example page: https://bugs.launchpad.net/firefox/+bug/38131 . In this page, when I try to scroll down using the scroll bar, my X process consumes between 40 and 55% of CPU o.O, and Firefox is very choppy (ps. Pango is disabled in Firefox).
My video card: 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400 GS] (rev a1)
Am I missing some important/magic option in the device section?
Here's my xorg.conf (generated by X -configure)
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "record"
Load "dri2"
Load "dbe"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G86 [GeForce 8400 GS]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Someone else with slow scrolling in that page?
Thanks in advance!
Last edited by estevao (2010-05-02 22:01:43)I only have these (no xorg.conf):
~ $ cat /etc/X11/xorg.conf.d/20-nvidia.conf
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "RandRRotation" "true"
Option "NoLogo" "true"
Option "Coolbits" "1"
Option "TripleBuffer" "True"
# Option "DamageEvents" "True"
# Option "UseEvents" "True"
# Option "BackingStore" "True"
Option "DPMS" "True"
Option "RegistryDwords" "PerfLevelSrc=0x3333"
EndSection -
Xorg 1.8 - nvidia 96xx legacy driver
Since a few weeks I use Archlinux and I'was happy with it until my last upgrade. After this (incl. kernel 2.6.34 and xorg 1.8) I was lost in the dark. Googling learned me that the nvidia 96xx legacy driver (I have an old Geforce card) cannot cope with xorg 1.8 (yet??). Could this be better coordinated in the future?
If not, can someone please explain (in simple terms, I'm a newbie, what to do if such things happen).
Thanks in advance.Lets see (long post)
uname -a
Linux mediacenter 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686 Intel(R) Pentium(R) 4 CPU 3.00GHz GenuineIntel GNU/Linux
[ 11.364]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 11.364]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 11.364] X Protocol Version 11, Revision 0
[ 11.364] Build Operating System: Linux 2.6.34-ARCH i686
[ 11.364] Current Operating System: Linux mediacenter 2.6.34-ARCH #1 SMP PREEMPT Sat Jun 19 13:06:16 CEST 2010 i686
[ 11.364] Kernel command line: root=/dev/sda1 ro fastboot quiet 4
[ 11.364] Build Date: 21 June 2010 11:54:27AM
[ 11.364]
[ 11.378] Current version of pixman: 0.18.2
[ 11.378] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.378] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.378] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 28 02:17:21 2010
[ 11.401] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.401] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.450] (==) ServerLayout "Layout0"
[ 11.450] (**) |-->Screen "Screen0" (0)
[ 11.450] (**) | |-->Monitor "Monitor0"
[ 11.450] (**) | |-->Device "Device0"
[ 11.450] (**) |-->Input Device "Keyboard0"
[ 11.450] (**) |-->Input Device "Mouse0"
[ 11.450] (==) Automatically adding devices
[ 11.450] (==) Automatically enabling devices
[ 11.503] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.503] Entry deleted from font path.
[ 11.503] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 11.503] Entry deleted from font path.
[ 11.521] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 11.521] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.521] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 11.521] (WW) Disabling Keyboard0
[ 11.521] (WW) Disabling Mouse0
[ 11.521] (II) Loader magic: 0x81e9d00
[ 11.521] (II) Module ABI versions:
[ 11.521] X.Org ANSI C Emulation: 0.4
[ 11.521] X.Org Video Driver: 7.0
[ 11.521] X.Org XInput driver : 9.0
[ 11.521] X.Org Server Extension : 3.0
[ 11.531] (--) PCI:*(0:1:0:0) 10de:0181:1462:9350 nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] rev 164, Mem @ 0xfb000000/16777216, 0xf4000000/67108864, BIOS @ 0x????????/131072
[ 11.531] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.531] (II) LoadModule: "extmod"
[ 11.580] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 11.589] (II) Module extmod: vendor="X.Org Foundation"
[ 11.589] compiled for 1.8.1.902, module version = 1.0.0
[ 11.589] Module class: X.Org Server Extension
[ 11.589] ABI class: X.Org Server Extension, version 3.0
[ 11.589] (II) Loading extension MIT-SCREEN-SAVER
[ 11.589] (II) Loading extension XFree86-VidModeExtension
[ 11.589] (II) Loading extension XFree86-DGA
[ 11.591] (II) Loading extension DPMS
[ 11.591] (II) Loading extension XVideo
[ 11.591] (II) Loading extension XVideo-MotionCompensation
[ 11.591] (II) Loading extension X-Resource
[ 11.591] (II) LoadModule: "dbe"
[ 11.608] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 11.618] (II) Module dbe: vendor="X.Org Foundation"
[ 11.618] compiled for 1.8.1.902, module version = 1.0.0
[ 11.618] Module class: X.Org Server Extension
[ 11.618] ABI class: X.Org Server Extension, version 3.0
[ 11.618] (II) Loading extension DOUBLE-BUFFER
[ 11.619] (II) LoadModule: "glx"
[ 11.619] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.050] (II) Module glx: vendor="NVIDIA Corporation"
[ 12.050] compiled for 4.0.2, module version = 1.0.0
[ 12.050] Module class: X.Org Server Extension
[ 12.050] (II) NVIDIA GLX Module 96.43.16 Thu Jan 28 16:14:25 PST 2010
[ 12.050] (II) Loading extension GLX
[ 12.050] (II) LoadModule: "record"
[ 12.051] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 12.061] (II) Module record: vendor="X.Org Foundation"
[ 12.061] compiled for 1.8.1.902, module version = 1.13.0
[ 12.061] Module class: X.Org Server Extension
[ 12.061] ABI class: X.Org Server Extension, version 3.0
[ 12.061] (II) Loading extension RECORD
[ 12.061] (II) LoadModule: "dri"
[ 12.061] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 12.074] (II) Module dri: vendor="X.Org Foundation"
[ 12.074] compiled for 1.8.1.902, module version = 1.0.0
[ 12.074] ABI class: X.Org Server Extension, version 3.0
[ 12.074] (II) Loading extension XFree86-DRI
[ 12.074] (II) LoadModule: "dri2"
[ 12.074] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12.075] (II) Module dri2: vendor="X.Org Foundation"
[ 12.075] compiled for 1.8.1.902, module version = 1.2.0
[ 12.075] ABI class: X.Org Server Extension, version 3.0
[ 12.075] (II) Loading extension DRI2
[ 12.075] (II) LoadModule: "nvidia"
[ 12.084] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 12.137] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 12.137] compiled for 4.0.2, module version = 1.0.0
[ 12.137] Module class: X.Org Video Driver
[ 12.137] (WW) NVIDIA: This server has an unsupported input driver ABI version (have 9.0, need < 8.0). The driver will continue to load, but may behave strangely.
[ 12.175] (II) NVIDIA dlloader X Driver 96.43.16 Thu Jan 28 16:02:25 PST 2010
[ 12.176] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 12.176] (--) using VT number 4
[ 12.178] (II) Primary Device is: PCI 01@00:00:0
[ 12.178] (II) Loading sub module "fb"
[ 12.178] (II) LoadModule: "fb"
[ 12.178] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.189] (II) Module fb: vendor="X.Org Foundation"
[ 12.189] compiled for 1.8.1.902, module version = 1.0.0
[ 12.189] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.190] (II) Loading sub module "ramdac"
[ 12.190] (II) LoadModule: "ramdac"
[ 12.190] (II) Module "ramdac" already built-in
[ 12.211] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 12.211] (==) NVIDIA(0): RGB weight 888
[ 12.211] (==) NVIDIA(0): Default visual is TrueColor
[ 12.211] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.211] (**) NVIDIA(0): Option "DPI" "96x96"
[ 12.214] (**) NVIDIA(0): Enabling RENDER acceleration
[ 12.214] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 12.214] (II) NVIDIA(0): enabled.
[ 12.706] (II) NVIDIA(0): NVIDIA GPU GeForce4 MX 440 with AGP8X at PCI:1:0:0 (GPU-0)
[ 12.706] (--) NVIDIA(0): Memory: 65536 kBytes
[ 12.706] (--) NVIDIA(0): VideoBIOS: 04.18.20.07.23
[ 12.706] (II) NVIDIA(0): Detected AGP rate: 8X
[ 12.706] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 12.706] (--) NVIDIA(0): Connected display device(s) on GeForce4 MX 440 with AGP8X at
[ 12.706] (--) NVIDIA(0): PCI:1:0:0:
[ 12.706] (--) NVIDIA(0): LG TV (CRT-0)
[ 12.706] (--) NVIDIA(0): LG TV (CRT-0): 350.0 MHz maximum pixel clock
[ 12.707] (II) NVIDIA(0): Assigned Display Device: CRT-0
[ 12.707] (II) NVIDIA(0): Validated modes:
[ 12.707] (II) NVIDIA(0): "856x481"
[ 12.707] (II) NVIDIA(0): Virtual screen size determined to be 856 x 481
[ 12.707] (**) NVIDIA(0): DPI set to (96, 96); computed from "DPI" X config option
[ 12.707] (--) Depth 24 pixmap format is 32 bpp
[ 12.709] (II) NVIDIA(0): Initialized GART.
[ 12.720] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 12.728] (II) NVIDIA(0): Setting mode "856x481"
[ 12.813] (II) Loading extension NV-GLX
[ 12.824] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[ 12.840] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[ 12.850] (==) NVIDIA(0): Backing store disabled
[ 12.850] (==) NVIDIA(0): Silken mouse enabled
[ 12.852] (**) NVIDIA(0): DPMS enabled
[ 12.852] (II) Loading extension NV-CONTROL
[ 12.852] (==) RandR enabled
[ 12.852] (II) Initializing built-in extension Generic Event Extension
[ 12.852] (II) Initializing built-in extension SHAPE
[ 12.852] (II) Initializing built-in extension MIT-SHM
[ 12.852] (II) Initializing built-in extension XInputExtension
[ 12.852] (II) Initializing built-in extension XTEST
[ 12.852] (II) Initializing built-in extension BIG-REQUESTS
[ 12.852] (II) Initializing built-in extension SYNC
[ 12.852] (II) Initializing built-in extension XKEYBOARD
[ 12.852] (II) Initializing built-in extension XC-MISC
[ 12.852] (II) Initializing built-in extension SECURITY
[ 12.852] (II) Initializing built-in extension XINERAMA
[ 12.852] (II) Initializing built-in extension XFIXES
[ 12.852] (II) Initializing built-in extension RENDER
[ 12.852] (II) Initializing built-in extension RANDR
[ 12.852] (II) Initializing built-in extension COMPOSITE
[ 12.852] (II) Initializing built-in extension DAMAGE
[ 12.856] (II) Initializing extension GLX
[ 13.318] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 13.318] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.318] (II) LoadModule: "evdev"
[ 13.318] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.326] (II) Module evdev: vendor="X.Org Foundation"
[ 13.326] compiled for 1.8.0, module version = 2.4.0
[ 13.326] Module class: X.Org XInput Driver
[ 13.326] ABI class: X.Org XInput driver, version 9.0
[ 13.326] (**) Power Button: always reports core events
[ 13.326] (**) Power Button: Device: "/dev/input/event4"
[ 13.333] (II) Power Button: Found keys
[ 13.333] (II) Power Button: Configuring as keyboard
[ 13.333] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 13.333] (**) Option "xkb_rules" "evdev"
[ 13.333] (**) Option "xkb_model" "evdev"
[ 13.333] (**) Option "xkb_layout" "us"
[ 13.377] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 13.377] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.377] (**) Power Button: always reports core events
[ 13.377] (**) Power Button: Device: "/dev/input/event2"
[ 13.387] (II) Power Button: Found keys
[ 13.387] (II) Power Button: Configuring as keyboard
[ 13.387] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 13.387] (**) Option "xkb_rules" "evdev"
[ 13.387] (**) Option "xkb_model" "evdev"
[ 13.387] (**) Option "xkb_layout" "us"
[ 13.387] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 13.387] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 13.387] (**) Sleep Button: always reports core events
[ 13.387] (**) Sleep Button: Device: "/dev/input/event3"
[ 13.397] (II) Sleep Button: Found keys
[ 13.397] (II) Sleep Button: Configuring as keyboard
[ 13.397] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 13.397] (**) Option "xkb_rules" "evdev"
[ 13.397] (**) Option "xkb_model" "evdev"
[ 13.397] (**) Option "xkb_layout" "us"
[ 13.401] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 13.401] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.401] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.401] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 13.410] (II) AT Translated Set 2 keyboard: Found keys
[ 13.410] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 13.410] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 13.410] (**) Option "xkb_rules" "evdev"
[ 13.410] (**) Option "xkb_model" "evdev"
[ 13.410] (**) Option "xkb_layout" "us"
[ 13.411] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 13.411] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 13.411] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 13.411] (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found relative axes
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 13.423] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 13.423] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 13.423] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.423] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
[ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 13.424] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 13.424] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 13.424] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 13.424] (II) No input driver/identifier specified (ignoring)
[ 13.424] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 13.424] (II) No input driver/identifier specified (ignoring)
[tigtex@mediacenter ~]$ glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
7096 frames in 5.0 seconds = 1419.008 FPS
7110 frames in 5.0 seconds = 1421.859 FPS
7111 frames in 5.0 seconds = 1422.168 FPS
01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a4)
[tigtex@mediacenter ~]$ lsmod | grep nvidia
nvidia 4657813 22
i2c_core 15144 2 i2c_viapro,nvidia
agpgart 23120 2 nvidia,via_agp
[root@mediacenter tigtex]# pacman -Syu
:: Synchronizing package databases...
testing is up to date
core is up to date
extra is up to date
community is up to date
:: Starting full system upgrade...
there is nothing to do
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Jan 28 16:14:36 PST 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
Option "DPI" "96x96"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "856x481"
EndSubSection
EndSection
pacman -Qs nvidia
local/libvdpau 0.4-1
Nvidia VDPAU library
local/nvidia-96xx 96.43.16-3
NVIDIA drivers for kernel26, 96xx branch.
local/nvidia-96xx-utils 96.43.16-1
NVIDIA drivers utilities and libraries, 96xx branch.
Good luck with the mistery.
I didn't use anything else to install nvidia-96xx, it was with pacman. nvidia-96xx is no longer on repos but it was when i made the setup. I dont see why they removed it. Works 100% good here on my SD plasma. Even with games and xbmc.
Last edited by TigTex (2010-06-28 01:36:03) -
Xorg 1.8 nvidia GeForce4 MX 4000 problem.
Hello! because the nvidia-96xx proprietary drivers are not compatible with the new version of xorg, I decided to use the free drivers nouveau.
# pacman -S nouveau-dri xf86-video-nouveau
But I can not get a hardware 3D rendering.
#glxinfo | grep -i opengl
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.8.2
OpenGL shading language version string: 1.20
OpenGL extensions:
I leave my xorg.conf
http://pastebin.com/UUaZiDXF
Thanks!3D is unsupported for nouveau as of now. There is a tutorial on the website to try to enable it.
http://wiki.archlinux.org/index.php/Nouveau#3D -
[Solved]Xorg-server and nvidia binary driver don't work
See topic. When updating to xf86-input-evdev-2.8.2-2 xf86-input-joystick-1.6.2-3 xf86-input-keyboard-1.8.0-2 xf86-input-mouse-1.9.0-2 and xorg-server-1.15.0-1 X won't start and 'systemctl status kdm.service' states that the X server has died. According to Phoronix this should not happen.
Harvey
Last edited by Harey (2014-01-14 11:06:53)The ABI check is there for a purpose:
[ 38.018] Loading extension NV-GLX
[ 38.027] (EE)
[ 38.027] (EE) Backtrace:
[ 38.029] (EE) 0: /usr/bin/X (xorg_backtrace+0x48) [0x5834c8]
[ 38.029] (EE) 1: /usr/bin/X (0x400000+0x1871a9) [0x5871a9]
[ 38.029] (EE) 2: /usr/lib/libpthread.so.0 (0x7ff70edbf000+0xf870) [0x7ff70edce870]
[ 38.029] (EE) 3: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7ff708c51000+0x4e427f) [0x7ff70913527f]
[ 38.029] (EE) 4: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7ff708c51000+0x4eb501) [0x7ff70913c501]
[ 38.029] (EE) 5: /usr/bin/X (AddScreen+0x71) [0x435c81]
[ 38.029] (EE) 6: /usr/bin/X (InitOutput+0x3df) [0x4769df]
[ 38.029] (EE) 7: /usr/bin/X (0x400000+0x3961b) [0x43961b]
[ 38.029] (EE) 8: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7ff70dc35b05]
[ 38.029] (EE) 9: /usr/bin/X (0x400000+0x24dae) [0x424dae]
[ 38.029] (EE)
[ 38.029] (EE) Segmentation fault at address 0x18
[ 38.029] (EE)
Fatal server error:
[ 38.029] (EE) Caught signal 11 (Segmentation fault). Server aborting
Seems we have to wait for nvidia to include xorg-server 1.15 into their driver
Harvey -
[Solved] (Partial) Loss of vid acceleration with xorg 1.7 & nvidia 190
I've noticed people having a lot of problems with the new xorg server crashing, but my problem appears to be different: Xorg is stable, hasn't crashed yet: but games (and steam) fail to load. However, video acceleration works just fine for compiz and glxgears.
The games are run in a 32 bit chroot, which is completely up-to-date. I haven't seen anyone else with this problem, so I'm creating a new post (whith a topic title that may be way off :).
Here are the error messages displayed when I try to load the games:
Quake4:
--------------- R_InitOpenGL ----------------
Initializing SDL subsystem
No protocol specified
No protocol specified
Initializing SDL subsystem
No protocol specified
No protocol specified
Fatal Error: Unable to initialize OpenGL
--------------- BSE Shutdown ----------------
idRenderSystem::Shutdown()
Sys_Error: Unable to initialize OpenGL
ET:Quake Wars:
Initializing SDL subsystem
No protocol specified
No protocol specified
WARNING: SDL_Init failed: No available video device
------- Initializing renderSystem --------
----- R_InitOpenGL -----
signal caught: 'Segmentation fault', si_code 1
callstack:
0x0
[0x082e6001]
[0x082e340d]
[0xf77cb410]
Trying to exit gracefully..
--------------- BSE Shutdown ----------------
Shutting down SDL subsystem
idRenderSystem::Shutdown()
Steam:
No protocol specified
No protocol specified
No protocol specified
No protocol specified
No protocol specified
No protocol specified
Application tried to create a window, but no driver could be loaded.
Make sure that your X server is running and that $DISPLAY is set correctly.
err:systray:initialize_systray Could not create tray window
Application tried to create a window, but no driver could be loaded.
Make sure that your X server is running and that $DISPLAY is set correctly.
I've posted on the tail end of the output for Quake4 and ET:Quake Wars for brevity, but included it all for Steam. I've lost the old xorg and nvidia packages, so I'm unable to downgrade. Also, "echo $DISPLAY" in both native and 32bit chroot terminal's output :0.0.
Am I missing something obvious here? Anyone else experiencing something similar?
Last edited by 5arge (2009-11-15 18:01:17)The problem was because of the 32 bit chroot: X server wasn't allowing access.
"xhost +local:" run from the terminal before trying the games fixes it (but needs to be done with every reboot).
Now, I just need to figure out what's changed seeing as I never had to do this before... (schroot?, Xorg?, ??) -
[SOLVED]Triple Monitors Xorg with AMD&NVIDIA: XRANDR and Xinerama...
Hello,
I'm trying to set up a tri monitor setup. Unfortunately I must use 2 cards, one an AMD HD4350 and a PCI Geforce FX200. (Old skool I know)
Due to the restrictions, I am forced to use the open source drivers (else nvidia glx will clash).
As I see it, I have 2 solutions available to me:
1: Use XRANDR to span the displays (this is what I did previous to the introduction of the third monitor and nvidia card to my system)
I tried to do this, by setting up a second X screen on the NVIDIA card, disabling Xinerama; but after much googling I can't figure out the syntax for panning across 2 screens (X screens) in XRANDR, even tho it's >1.3, which supposedly supports multi card output.
2:Use Xinerama, sacrificing randr, and composite extensions.
I also attempted to do this, with some limited success. I could get the NVIDIA screen to be right of the ATI, but I couldn't get 2 independent outputs running on the ATI card, even with "ZapohHeads" appended to one of the device sections for my ATI card.
Any suggestions to how I can sort this?
I'm amazed there's not a way to have mixed nvidia/radeon on X11 in 2011.
Thanks,
Chris.
EDIT:
It turns out the xrandr multi card output is an urban myth.
I went the Xinerama route, I've pasted my xorg.conf below.
Section "ServerLayout"
Identifier "Hand Configured"
Screen 0 "LeftScreen" 0 0
Screen 1 "MiddleScreen" RightOf "LeftScreen"
Screen 2 "RightScreen" RightOf "MiddleScreen"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "Xinerama" "ON"
Option "RandR" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "record"
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
Modeline "1280x1024@75" 156.43 1280 1312 1904 1936 1024 1043 1056 1076
Modeline "1280x1024@60" 114.98 1280 1312 1744 1776 1024 1045 1055 1076
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection
Section "Monitor"
Identifier "Monitor1"
Modeline "1280x1024@75" 156.43 1280 1312 1904 1936 1024 1043 1056 1076
Modeline "1280x1024@60" 114.98 1280 1312 1744 1776 1024 1045 1055 1076
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection
Section "Monitor"
Identifier "Monitor2"
Modeline "1280x1024@75" 156.43 1280 1312 1904 1936 1024 1043 1056 1076
Modeline "1280x1024@60" 114.98 1280 1312 1744 1776 1024 1045 1055 1076
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
Option "AccelMethod" "EXA"
Option "DRI" "on"
Option "ColorTiling" "on"
#Screen 0
# Option "ZaphodHeads" "DVI-0"
BusID "PCI:01:00:0"
# Option "DynamicPM" "on"
# Option "ClockGating" "on"
EndSection
Section "Device"
Identifier "Card1"
Driver "radeon"
Option "AccelMethod" "EXA"
Option "DRI" "on"
Option "ColorTiling" "on"
Screen 1
Option "ZaphodHeads" "DVI-0"
BusID "PCI:01:00:0"
# Option "DynamicPM" "on"
# Option "ClockGating" "on"
EndSection
Section "Device"
Identifier "nvidia card"
Driver "nouveau"
BusID "PCI:3:5:0"
#Screen 1
EndSection
Section "Screen"
Identifier "LeftScreen"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
#Virtual 2560 1024
EndSubSection
EndSection
Section "Screen"
Identifier "MiddleScreen"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
#Virtual 2560 1024
EndSubSection
EndSection
Section "Screen"
Identifier "RightScreen"
Device "nvidia card"
Monitor "Monitor2"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
#Virtual 2560 1024
EndSubSection
EndSection
Last edited by kernel_geek (2011-03-24 18:44:26)Hello,
I'm trying to set up a tri monitor setup. Unfortunately I must use 2 cards, one an AMD HD4350 and a PCI Geforce FX200. (Old skool I know)
Due to the restrictions, I am forced to use the open source drivers (else nvidia glx will clash).
As I see it, I have 2 solutions available to me:
1: Use XRANDR to span the displays (this is what I did previous to the introduction of the third monitor and nvidia card to my system)
I tried to do this, by setting up a second X screen on the NVIDIA card, disabling Xinerama; but after much googling I can't figure out the syntax for panning across 2 screens (X screens) in XRANDR, even tho it's >1.3, which supposedly supports multi card output.
2:Use Xinerama, sacrificing randr, and composite extensions.
I also attempted to do this, with some limited success. I could get the NVIDIA screen to be right of the ATI, but I couldn't get 2 independent outputs running on the ATI card, even with "ZapohHeads" appended to one of the device sections for my ATI card.
Any suggestions to how I can sort this?
I'm amazed there's not a way to have mixed nvidia/radeon on X11 in 2011.
Thanks,
Chris.
EDIT:
It turns out the xrandr multi card output is an urban myth.
I went the Xinerama route, I've pasted my xorg.conf below.
Section "ServerLayout"
Identifier "Hand Configured"
Screen 0 "LeftScreen" 0 0
Screen 1 "MiddleScreen" RightOf "LeftScreen"
Screen 2 "RightScreen" RightOf "MiddleScreen"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "Xinerama" "ON"
Option "RandR" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "record"
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
Modeline "1280x1024@75" 156.43 1280 1312 1904 1936 1024 1043 1056 1076
Modeline "1280x1024@60" 114.98 1280 1312 1744 1776 1024 1045 1055 1076
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection
Section "Monitor"
Identifier "Monitor1"
Modeline "1280x1024@75" 156.43 1280 1312 1904 1936 1024 1043 1056 1076
Modeline "1280x1024@60" 114.98 1280 1312 1744 1776 1024 1045 1055 1076
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection
Section "Monitor"
Identifier "Monitor2"
Modeline "1280x1024@75" 156.43 1280 1312 1904 1936 1024 1043 1056 1076
Modeline "1280x1024@60" 114.98 1280 1312 1744 1776 1024 1045 1055 1076
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
Option "AccelMethod" "EXA"
Option "DRI" "on"
Option "ColorTiling" "on"
#Screen 0
# Option "ZaphodHeads" "DVI-0"
BusID "PCI:01:00:0"
# Option "DynamicPM" "on"
# Option "ClockGating" "on"
EndSection
Section "Device"
Identifier "Card1"
Driver "radeon"
Option "AccelMethod" "EXA"
Option "DRI" "on"
Option "ColorTiling" "on"
Screen 1
Option "ZaphodHeads" "DVI-0"
BusID "PCI:01:00:0"
# Option "DynamicPM" "on"
# Option "ClockGating" "on"
EndSection
Section "Device"
Identifier "nvidia card"
Driver "nouveau"
BusID "PCI:3:5:0"
#Screen 1
EndSection
Section "Screen"
Identifier "LeftScreen"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
#Virtual 2560 1024
EndSubSection
EndSection
Section "Screen"
Identifier "MiddleScreen"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
#Virtual 2560 1024
EndSubSection
EndSection
Section "Screen"
Identifier "RightScreen"
Device "nvidia card"
Monitor "Monitor2"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024"
#Virtual 2560 1024
EndSubSection
EndSection
Last edited by kernel_geek (2011-03-24 18:44:26) -
Xorg segmentation fault / nvidia proprietary blob
Hi!
I've been experiencing this issue with xorg crashing leaving the system completely unresponsive and with completely black screen. It appears to happen at random times and not consistently at all. It occurred for the first time several days ago. Unfortunately I'm not in a good position to track what may have caused this because I did pretty massive update 2-3 weeks ago. Since then I've been updating pretty regularly.
Here are some xorg logs.
It's pretty much full with:
(EE) [mi] EQ overflowing. Additional events will be discarded until existing events are processed.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57f67d]
(EE) 1: /usr/bin/X (mieqEnqueue+0x22b) [0x5615bb]
(EE) 2: /usr/bin/X (QueuePointerEvents+0x52) [0x44da82]
(EE) 3: /usr/lib/xorg/modules/input/evdev_drv.so (0x7fd27e33c000+0x580d) [0x7fd27e34180d]
(EE) 4: /usr/bin/X (0x400000+0x73da8) [0x473da8]
(EE) 5: /usr/bin/X (0x400000+0x9c330) [0x49c330]
(EE) 6: /usr/lib/libpthread.so.0 (0x7fd284986000+0xf870) [0x7fd284995870]
(EE) 7: /usr/lib/libc.so.6 (sigprocmask+0x10) [0x7fd283a1d6a0]
(EE) 8: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x81394) [0x7fd27ec28394]
(EE) 9: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x11c5d9) [0x7fd27ecc35d9]
(EE) 10: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x11ec7a) [0x7fd27ecc5c7a]
(EE) 11: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x124b0b) [0x7fd27eccbb0b]
(EE) 12: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x12628f) [0x7fd27eccd28f]
(EE) 13: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x1274c1) [0x7fd27ecce4c1]
(EE) 14: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x129920) [0x7fd27ecd0920]
(EE) 15: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x13d11f) [0x7fd27ece411f]
(EE) 16: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x1194f2) [0x7fd27ecc04f2]
(EE) 17: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x4d2432) [0x7fd27f079432]
(EE) 18: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x4d285e) [0x7fd27f07985e]
(EE) 19: /usr/bin/X (0x400000+0x58fa2) [0x458fa2]
(EE) 20: /usr/bin/X (FreeResource+0xa1) [0x459a31]
(EE) 21: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x4d263e) [0x7fd27f07963e]
(EE) 22: /usr/lib/xorg/modules/extensions/libglx.so (0x7fd281d58000+0x599834) [0x7fd2822f1834]
(EE)
(EE) [mi] These backtraces from mieqEnqueue may point to a culprit higher up the stack.
(EE) [mi] mieq is *NOT* the cause. It is a victim.
(EE) [mi] EQ overflow continuing. 100 events have been dropped.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57f67d]
(EE) 1: /usr/bin/X (QueuePointerEvents+0x52) [0x44da82]
(EE) 2: /usr/lib/xorg/modules/input/evdev_drv.so (0x7fd27e33c000+0x580d) [0x7fd27e34180d]
(EE) 3: /usr/bin/X (0x400000+0x73da8) [0x473da8]
(EE) 4: /usr/bin/X (0x400000+0x9c330) [0x49c330]
(EE) 5: /usr/lib/libpthread.so.0 (0x7fd284986000+0xf870) [0x7fd284995870]
(EE) 6: /usr/lib/libc.so.6 (sigprocmask+0x10) [0x7fd283a1d6a0]
(EE) 7: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x81394) [0x7fd27ec28394]
(EE) 8: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x11c5d9) [0x7fd27ecc35d9]
(EE) 9: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x11ec7a) [0x7fd27ecc5c7a]
(EE) 10: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x124b0b) [0x7fd27eccbb0b]
(EE) 11: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x12628f) [0x7fd27eccd28f]
(EE) 12: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x1274c1) [0x7fd27ecce4c1]
(EE) 13: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x129920) [0x7fd27ecd0920]
(EE) 14: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x13d11f) [0x7fd27ece411f]
(EE) 15: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x1194f2) [0x7fd27ecc04f2]
(EE) 16: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x4d2432) [0x7fd27f079432]
(EE) 17: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x4d285e) [0x7fd27f07985e]
(EE) 18: /usr/bin/X (0x400000+0x58fa2) [0x458fa2]
(EE) 19: /usr/bin/X (FreeResource+0xa1) [0x459a31]
(EE) 20: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x4d263e) [0x7fd27f07963e]
(EE) 21: /usr/lib/xorg/modules/extensions/libglx.so (0x7fd281d58000+0x599834) [0x7fd2822f1834]
(EE)
(EE) [mi] EQ overflow continuing. 1000 events have been dropped.
(EE) [mi] No further overflow reports will be reported until the clog is cleared.
(EE)
(EE) Backtrace:
(EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57f67d]
(EE) 1: /usr/bin/X (QueuePointerEvents+0x52) [0x44da82]
(EE) 2: /usr/lib/xorg/modules/input/evdev_drv.so (0x7fd27e33c000+0x580d) [0x7fd27e34180d]
(EE) 3: /usr/bin/X (0x400000+0x73da8) [0x473da8]
(EE) 4: /usr/bin/X (0x400000+0x9c330) [0x49c330]
(EE) 5: /usr/lib/libpthread.so.0 (0x7fd284986000+0xf870) [0x7fd284995870]
(EE) 6: /usr/lib/libc.so.6 (sigprocmask+0x10) [0x7fd283a1d6a0]
(EE) 7: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x81394) [0x7fd27ec28394]
(EE) 8: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x11c5d9) [0x7fd27ecc35d9]
(EE) 9: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x11ece7) [0x7fd27ecc5ce7]
(EE) 10: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x126329) [0x7fd27eccd329]
(EE) 11: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x1274c1) [0x7fd27ecce4c1]
(EE) 12: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x12ae45) [0x7fd27ecd1e45]
(EE) 13: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x147f6e) [0x7fd27eceef6e]
(EE) 14: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x119164) [0x7fd27ecc0164]
(EE) 15: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x4d0f91) [0x7fd27f077f91]
(EE) 16: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x4db1a0) [0x7fd27f0821a0]
(EE) 17: /usr/bin/X (0x400000+0x373be) [0x4373be]
(EE) 18: /usr/bin/X (0x400000+0x2693a) [0x42693a]
(EE) 19: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7fd283a09bc5]
(EE) 20: /usr/bin/X (0x400000+0x26c81) [0x426c81]
(EE)
[ 40751.796] [mi] Increasing EQ size to 1024 to prevent dropped events.
[ 40751.796] [mi] EQ processing has resumed after 3197 dropped events.
[ 40751.796] [mi] This may be caused my a misbehaving driver monopolizing the server's resources.
I'm not really sure whether this is separate issue or not but I thought I should include it here. I don't really know what this is about but I've seen "kwin effects restarted" KDE messages occurring at these times too. I'm not sure how related this may be but I'm seeing lots of artifacts on rendered pages when using chromium browser. Nothing of these used to happen before I went and updated the system. Everything was rock solid for me.
And here is the seg fault in the log:
[ 67406.515] (EE)
[ 67406.515] (EE) Backtrace:
[ 67406.515] (EE) 0: /usr/bin/X (xorg_backtrace+0x3d) [0x57f67d]
[ 67406.515] (EE) 1: /usr/bin/X (0x400000+0x1833e9) [0x5833e9]
[ 67406.515] (EE) 2: /usr/lib/libpthread.so.0 (0x7fd284986000+0xf870) [0x7fd284995870]
[ 67406.515] (EE) 3: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0xcd23c) [0x7fd27ec7423c]
[ 67406.515] (EE) 4: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0xdec9f) [0x7fd27ec85c9f]
[ 67406.515] (EE) 5: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x508770) [0x7fd27f0af770]
[ 67406.515] (EE) 6: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x5071f5) [0x7fd27f0ae1f5]
[ 67406.515] (EE) 7: /usr/lib/xorg/modules/drivers/nvidia_drv.so (0x7fd27eba7000+0x5089ad) [0x7fd27f0af9ad]
[ 67406.515] (EE) 8: /usr/bin/X (0x400000+0xcf3fb) [0x4cf3fb]
[ 67406.516] (EE) 9: /usr/bin/X (0x400000+0xd019d) [0x4d019d]
[ 67406.516] (EE) 10: /usr/bin/X (0x400000+0x373be) [0x4373be]
[ 67406.516] (EE) 11: /usr/bin/X (0x400000+0x2693a) [0x42693a]
[ 67406.516] (EE) 12: /usr/lib/libc.so.6 (__libc_start_main+0xf5) [0x7fd283a09bc5]
[ 67406.516] (EE) 13: /usr/bin/X (0x400000+0x26c81) [0x426c81]
[ 67406.516] (EE)
[ 67406.516] (EE) Segmentation fault at address 0x7fd285661000
[ 67406.516] (EE)
Fatal server error:
[ 67406.516] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 67406.516] (EE)
[ 67406.516] (EE)
I'm not sure what is supposed to happen after xorg crashes and whether it's being restarted but everything related to xorg is unresponsive. The system otherwise is running fine but I haven't been able to find a solution to recover from this other than cold restart. I tried disconnecting and reconnecting the keyboard for instance and it's being registered(probably udev is responsible for this) but it's still "dead".
Is it nvidia's fault or something else may be going on? I know you can't really do much dealing with the binary blob. I haven't given nouveau a chance for a long time but I may try this in the future if it helps with something tracking this. I'm using nvidia 325.15-10 package from the official repos for now and the card is gtx 570 fermi. xorg is the latest one in the repos.
I'm not sure what driver version this package is based on(325.15 I guess). On the nvidia site the newest ones are 331.13 beta and 319.60. I can try them but I'm not even sure whether there are some patches needed to make them work with the newest kernels. At least I hope someone could provide more info on this because it seems interesting.
I'll gladly provide more info if needed. I just don't know what more could be useful.
Thanks!
Last edited by saty (2013-10-19 17:29:00)saty,
Is this continuing to happen for you? I am experiencing the same issue with version 325. I downgraded from 331 because there were some major bugs in that version. Have you found any solution?
Maybe you are looking for
-
Getting an error while scheduling ??
Hi, I created a package and which loads data from yahoo finance to my table,I had schedule it to start at 08:24 pm, data is coming into my table properly but getting this warning: ORA-00054: resource busy and acquire with NOWAIT specified or timeout
-
How to create a WebServices by using a BI data?
Hi All, Can anybody tell me that, How to create a WebServices by using a BI data? If possible need the steps also... Plz reply back me to [email protected] Your help will be appreciated Regards, KIran Telkar
-
Names button missing from Facbook Albums
In this video as well as the Facebook tutorial video on Apple.com it shows that when you have a Facebook album selected there should be a "Names" button on the bottom (to the left of edit.) I don't see that in iPhoto. I've tried deleting PLIST files,
-
Unable to save a tiff file (save over)
I have rendered some images with a 3d program and saved as tiffs. I will open the images in Photoshop and select SAVE. A message states "unable to save, the file is already open or in use". As a result, I will have to save a copy and rename it. What
-
Tool to test Webservices using SwA (Soap with Attachements)
Hi All, I generally use the took xmlspy to test any webservice. But now i am working with a webservice that is using SOAP with Attachemtns. it seems we cannot use xmlspy to test/invoke webservices that use soap with attachements. is there any tool by