Xorg 1.6, nvidia brokenness w/ dual monitors [SOLVED]
Hi,
I upgraded this past week to xorg-server 1.6.1-1, nvidia 180.44-1, and kernel26 2.6.29.1-4. When I rebooted today I found a few things are broken:
I have a laptop and external monitor dual screen setup where each screen is a separate x screen, as setup by nvidia-settings. After upgrading if I hold down any key for half a second or more (to trigger key repeat), my display on both monitors goes black and my mouse and keyboard stop responding (can't switch terminals, can't kill x...). Resuming from xscreensaver also triggers this same problem.
Another oddity is that when I move my mouse cursor from one monitor to the other a lingering "copy" of the cursor stays on the monitor I just move away from at the transition point to the other monitor.
If I physically disconnect my external monitor (w/o changing xorg.conf) X displays none of the problems listed above.
My xorg.conf is below. Most of it is probably not useful, although I should point out that I have input hotplugging disabled w/ AutoAddDevices false:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder57) Thu Jul 17 18:40:12 PDT 2008
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Thu Jun 5 00:10:21 PDT 2008
# Auto-generated by Archie mkxcfg
# Auto-generated by Archie mkxcfg
Section "ServerLayout"
# PS/2 Mouse not detected
# Serial Mouse not detected
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
Option "Xinerama" "true"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
FontPath "/usr/share/fonts/local"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "synaptics"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "Xinerama" "1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "0"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "0"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "Emulate3Buttons" "on"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LPL"
HorizSync 30.0 - 75.0
VertRefresh 60.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
Option "NoLogo" "true"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce Go 7300"
BusID "PCI:1:0:0"
Screen 0
Option "NoLogo" "true"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce Go 7300"
BusID "PCI:1:0:0"
Screen 1
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "metamodes" "DFP-0: 1280x800 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 800x600 +0+0; DFP-0: 640x480 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "False"
EndSection
Any help would be greatly appreciated!
Last edited by nonexistent (2009-04-23 01:54:18)
have you looked at /var/log/xorg.0.log for warnings and errors?
you need to get rid of ..
Load "type1"
Load "freetype"
If you want independent X screens you need to get rid of..
Option "Xinerama" "1"
or change "1" to "0" or "false"
For two screens you should only need two device sections and you have three.
Alot of people are having good results with a minimal xorg.conf with the new xorg-server. I can't really say too much about it as I still use my xorg.conf, although I could probably cut it down quite a bit.
It looks like your xorg.conf needs a lot of tweaking. Or you could just delete most everything in it and let autoconfig do it's thing. Then just add little by little till you get everything working.
Not sure how much it will help because i'm not using a laptop, but rather a desktop, but here's my working xorg.conf set up with nvidia and three seperate X screens.
# Xorg configuration file altered by Leigh
# Updated (Dec 2008)
# Three independent screens
# Three cards... (GeForce7900 PCI-E, GeForce6800 PCI-E, GeForce4 MX PCI)
# Monitors... (Two Dell 2005 FPW's, One NEC MultiSync FE1250+ CRT)
# Note: (Due to GeForce4 MX, I need to use the legacy nvidia drivers, nvidia-96xx.)
Section "ServerLayout"
Identifier "Multihead Layout"
Screen "Screen1" 0 0
Screen "Screen2" RightOf "Screen1"
Screen "Screen3" LeftOf "Screen1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
Option "AutoAddDevices" "false"
Option "AllowEmptyInput" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/msttf"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Chinese"
FontPath "/usr/share/fonts/asian-misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/artwiz-fonts"
FontPath "/usr/share/fonts/speedo"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/handwritten"
FontPath "/usr/share/fonts/script"
FontPath "/usr/share/emacs/fonts"
EndSection
Section "Module"
Load "dbe"
Load "v4l"
Load "ddc"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Buttons" "7"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "DELL"
ModelName "Dell 2005FPW"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
ModeLine "1680x1050" 119.0 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync
Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "DELL"
ModelName "Dell 2005FPW"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
ModeLine "1680x1050" 119.0 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync
Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor3"
VendorName "NEC"
ModelName "NEC MultiSync FE1250"
HorizSync 31.0 - 110.0
VertRefresh 50.0 - 160.0
ModeLine "1280x1024" 80.0 1280 1296 1512 1568 1024 1025 1037 1165 interlace
ModeLine "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -hsync -vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1280x1024" 181.8 1280 1312 1440 1696 1024 1031 1046 1072 -hsync -vsync
Option "dpms"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce7900"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce6800"
BusID "PCI:4:0:0"
EndSection
Section "Device"
Identifier "Device3"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "NVIDIA GeForce4 MX 440"
BusID "PCI:3:4:0"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "UseDisplayDevice" "DFP-0"
Option "IgnoreDisplayDevices" "TV-0"
Option "NvAGP" "3"
Option "RenderAccel" "true"
Option "AllowDDCCI" "true"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "UseEdidFreqs" "true"
Option "UseEdidDpi" "false"
Option "DPI" "98 x 97"
Option "HWCursor" "true"
SubSection "Display"
Depth 8
Modes "1680x1050" "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "UseDisplayDevice" "DFP-0"
Option "IgnoreDisplayDevices" "TV-0"
Option "NvAGP" "3"
Option "RenderAccel" "true"
Option "AllowDDCCI" "true"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "UseEdidFreqs" "true"
Option "UseEdidDpi" "false"
Option "DPI" "98 x 97"
Option "HWCursor" "true"
SubSection "Display"
Depth 8
Modes "1680x1050" "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1680x1050" "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050" "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050" "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "Device3"
Monitor "Monitor3"
DefaultDepth 24
Option "UseDisplayDevice" "CRT-0"
Option "IgnoreDisplayDevices" "TV-0"
Option "NvAGP" "3"
Option "RenderAccel" "true"
Option "AllowDDCCI" "true"
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "true"
Option "UseEdidFreqs" "true"
Option "UseEdidDpi" "false"
Option "DPI" "96 x 96"
Option "HWCursor" "true"
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "true"
EndSection
Last edited by Leigh (2009-04-22 10:04:56)
Similar Messages
-
Nvidia-settings to configure my dual monitor[SOLVED]
Hi,
I got a nvidia 9800 gtx graphic card and i try to configure my dual monitor. I try to get the nvidia config panel by terminal by typing this as root
nividia-settings
this is what append:
No protocol specified
ERROR: The control display is undefined; please run `nvidia-settings --help` for usage information.
someone can help me ?
Thank you
Last edited by Fou (2009-10-13 01:54:11)# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder63) Tue Jan 6 10:03:55 PST 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Wed Oct 1 15:09:35 PDT 2008
# Section "ServerFlags"
# Option "AutoAddDevices" "False"
# EndSection
# Section "InputDevice"
# generated from default
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/psaux"
# Option "Emulate3Buttons" "no"
# Option "ZAxisMapping" "4 5"
# EndSection
# Section "InputDevice"
# generated from default
# Identifier "Keyboard0"
# Driver "keyboard"
# EndSection
Section "ServerLayout"
# InputDevice "Keyboard0" "CoreKeyboard"
# InputDevice "Mouse0" "CorePointer"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
# RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 GT"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7300 GT"
EndSection
Section "Screen"
# Removed Option "metamodes" "DFP-0: 1280x1024_60 +1280+0, DFP-1: 1280x1024_60 +0+0"
# Removed Option "TwinViewXineramaInfoOrder" "DFP-0"
# Removed Option "metamodes" "DFP-0: 1280x1024_60 +0+0, DFP-1: 1280x1024_60 +1280+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
Option "RenderAccel" "true"
Option "NoLogo" "true"
Option "UseEdidDpi" "true"
# Option "DPI" "96 x 96"
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-1"
Option "metamodes" "DFP-0: 1280x1024_60 +1280+0, DFP-1: 1280x1024_60 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection -
New nvidia Broke my Dual Monitor Setup
I now have:
sudo pacman -Qs nvidia
local/nvidia 185.18.14-1
NVIDIA drivers for kernel26.
local/nvidia-utils 185.18.14-1
NVIDIA drivers utilities and libraries.
and now while nvidia-settings shows me both of my screens, no matter what I pick, the secondary screen never turns on. Nothing appears there.
Before today's update to the latest versions of the above packages, both screens worked fine.
any suggestions?
EDIT The system recognizes that the second monitor is there--if I unplug it and "detect displays" then it notes that it's gone. And I can drag a window (Xfce) onto that monitor--I just can't see anything there.
Last edited by CaptainKirk (2009-06-23 20:00:26)pacman -Qi kernel26
See "Required by"
I've downgraded my kernel many times before. The only things that usually give trouble about it are wireless drivers and the nvidia drivers, not the boot sequence itself. Besides, if something goes wrong, you can always boot into a livecd and just upgrade the kernel back to where it was from chroot. How to do so is in the wiki; I could link you to that or a post I made on the matter if need be. You should always have a functional graphical livecd of your choice available, such as ubuntu or system rescue cd or what have you, in case you need the internet. Or a second machine/laptop/whatever. On that note, an older virtualbox-modules is likely available on the aforementioned ARM website.
Also..
Do not be afraid of breaking things. That's just part of learning how to fix them and how to do it right in the future.
If you are on a machine where breaking things would be a major problem, using a bleeding edge distro on it is ill advised.
EDIT: Damn I'm sleepy.. so many mistakes in this post I needed to fix.. Gn
Last edited by FrozenFox (2009-06-24 08:56:31) -
NVIDIA Geforce4 MX Dual Monitor/TV Issue!!
I've recently ran an S-video from the onboard Geforce4 MX video to a VCR. I used an S-video to RCA adapter, tested and not the issue. I am able to receive a signal with color during POST and at WinXP splash screen at bootup. After loading display adapter drivers, after WinXP Splash Screen, I lose all color and receive just a black and white signal on the TV. I have tried six different drivers and all with mixed results. When I am able to load WinXP, using Nvidia driver version 42.43, I receive a color signal. I am then unable to view any movies within Windows Media Player 9.0 on the TV but they will play with no issues on the monitor.
Nvidia Display Adapter Driver Versions Tried/Results:
v41.07 - B&W signal on TV/unable to play movies in WMP 9.0
v42.43 - Color signal on TV/unable to play movies in WMP 9.0
v43.45 - B&W signal on TV/unable to play movies in WMP 9.0
v45.32 - B&W signal on TV/unable to play movies in WMP 9.0
v52.14 - B&W signal on TV/Able to play movies in WMP 9.0
v52.16 - B&W signal on TV/unable to play movies in WMP 9.0
I can smell how close I am to solving this issue, but if anybody has any suggestions for what drivers version to install...I'm up for some advice. PC Specs are right below Thanks in advance!So I realized that my dvd player has both s-video and rca connections (duh), and so I took my adapter and tried it out on the dvd player. The regular connection from rca to rca worked in color, but when i hooked the one end of the rca to the s-video adapter into the dvd player, everything comes out black and white.
Obviously these adapter cables shipped with our cards are of cheap quality. I'll just return mine to the store i bought the card, they said they said they'd replace it. Just a pain in the ass to drive all the way out to change a stupid tiny adapter. This next one better work.
Hope you guys find out your B&W problem. MSI should step in and get some people on this problem.
- Paps -
MythTV Program Guide Slow/No Composite Effects On Dual Monitor
Hello all,
I am not entirely sure where this would belong, so I put it here.
I am running Arch64 with an NVidia 8600GTS and dual monitors as seperate X screens. The second monitor is actually a TV not a monitor, and is using the S-Video output on the video card, but I'm not sure that that's relevant at all.
On my primary monitor the program guide in MythTV runs fairly decent, however on the TV it runs unbearably slow. Pushing up on the remote a time or two will take a minute or so to happen. I have it set to the least demanding level possible.
I originally thought that this was just a MythTV issue but I noticed that XCompmgr and Compiz-Fusion effects do not work at all on the TV either, so I think these issues are related.
Also, I do not currently have a composite window manager installed, I am using Gnome with Metacity.
Here is a copy of my xorg.conf:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder62) Tue Jan 6 09:44:34 PST 2009
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Tue Jan 6 09:43:54 PST 2009
# Auto-generated by Archie mkxcfg
# Auto-generated by Archie mkxcfg
Section "ServerLayout"
# Serial Mouse not detected
# USB Mouse not detected
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 55.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "All"
BoardName "All"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 16
Option "TwinView" "0"
Option "metamodes" "DFP: 1680x1050 +0+0; DFP: 800x600 +0+0; DFP: 640x480 +0+0"
SubSection "Display"
Depth 16
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 16
Option "TVStandard" "NTSC-M"
Option "TVOutFormat" "SVIDEO"
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 16
EndSubSection
EndSection
It's a bit of a mess at the moment. Last time I reinstalled I was having trouble with the keyboard and mouse not working in Gnome, so I've been hesitant to mess with it too much.
On my previous install my xorg.conf looked like this:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder58) Wed Oct 1 15:13:37 PDT 2008
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Thu Jul 17 18:39:00 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
# RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
# Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "keyboard"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "TV-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600 GTS"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
# Removed Option "metamodes" "DFP: nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "RenderAccel" "True"
Option "NoRenderExtension" "False"
Option "AllowGLXWithComposite" "True"
Option "XvmcUsesTextures" "True"
Option "LoadKernelModule" "True"
Option "DamageEvents" "True"
# Option "LogoPath" "/home/theavataroftime/Pictures"
Option "NoLogo" "True"
Option "TwinView" "0"
Option "metamodes" "DFP: 1680x1050 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "RenderAccel" "True"
Option "NoRenderExtension" "False"
Option "AllowGLXWithComposite" "True"
Option "XvmcUsesTextures" "True"
Option "LoadKernelModule" "True"
Option "DamageEvents" "True"
Option "LogoPath" "/home/theavataroftime/Pictures"
Option "NoLogo" "True"
Option "TVStandard" "NTSC-M"
Option "TVOutFormat" "SVIDEO"
Option "TwinView" "0"
Option "metamodes" "TV: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
I had the same issues with composite managers and that MythTV guide using this xorg.conf too.
Has anyone had any similar issues? I am at a total loss here, so any help is greatly appreciated. Thank you.No one else has had troubles with the program guide or composite effects on dual monitors?
-
Dual monitors on nvidia geforce fx 5200
Hi,
I'm using a nvidia geforce fx 5200 card that has vga out, dvi out, and svideo out. I have one crt hooked into the vga, the main monitor, and I have a dvi to vga converter, to enable a second vga, crt monitor. When I try to use the nvidia-settings, and enable twinview, and I get this message:
"failed to set metamode (1) 'CRT00: nvidia-auto-select @1024x768 + 1024+0, DFP-0: 1024x768 @1024x768 +0+0' (Mode 2048x768, id: 50) on X screen 0."
any ideas? thanks.Hm, Not working, just display on the true vga monitor. Are you using a dvi to vga connector as well? Heres my log output, I couldn't make too much of it, I tried to switch the CRT-1 to DFP-0 which didn't seem to do the trick either.
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux kenny-desktop 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 8 10:13:45 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 13 13:50:20 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xfd000000/0, 0xe0000000/0, BIOS @ 0x????????/131072
(--) PCI: (0@3:10:0) Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder rev 1, Mem @ 0xf0000000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.12 Thu Jul 17 18:36:35 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 173.14.12 Thu Jul 17 18:15:54 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "MetaModes" "CRT-0: 1024x768 +0+0, CRT-1: 1024x768_85 +1024+0; CRT-0: 800x600 +0+0, CRT-1: NULL; CRT-0: 640x480 +0+0, CRT-1: NULL"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 (NV34) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.34.20.42.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at PCI:1:0:0:
(--) NVIDIA(0): Envision EFT7x0 Series (CRT-0)
(--) NVIDIA(0): DELL D1025HTX (DFP-0)
(--) NVIDIA(0): Envision EFT7x0 Series (CRT-0): 350.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL D1025HTX (DFP-0): 135.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL D1025HTX (DFP-0): Internal Single Link TMDS
(II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
(WW) NVIDIA(0): TwinView requested, but only 1 display devices found.
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): Invalid display device in Mode Description
(WW) NVIDIA(0): "CRT-1:1024x768_85+1024+0"
(WW) NVIDIA(0): Not using mode description "CRT-1:1024x768_85+1024+0"; unable
(WW) NVIDIA(0): to map to display device
(WW) NVIDIA(0): Invalid display device in Mode Description "CRT-1:NULL"
(WW) NVIDIA(0): Not using mode description "CRT-1:NULL"; unable to map to
(WW) NVIDIA(0): display device
(WW) NVIDIA(0): Invalid display device in Mode Description "CRT-1:NULL"
(WW) NVIDIA(0): Not using mode description "CRT-1:NULL"; unable to map to
(WW) NVIDIA(0): display device
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "CRT-0:1024x768+0+0,CRT-1:1024x768_85+1024+0"
(II) NVIDIA(0): "CRT-0:800x600+0+0,CRT-1:NULL"
(II) NVIDIA(0): "CRT-0:640x480+0+0,CRT-1:NULL"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "CRT-0:1024x768+0+0,CRT-1:1024x768_85+1024+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) config/hal: Adding input device Logitech Optical USB Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event2"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
AUDIT: Fri Feb 13 13:52:42 2009: 3113 X: client 17 rejected from local host ( uid=0 gid=0 pid=3481 ) -
Archlinux dual monitor without Xorg/Xwindows (cli only)
Hi,
i have successfully installed Archlinux on my laptop, everything is fine! Xcfe desktop env. is able to handle dual monitor with the "xinerama" option (move windows between screens) with the "/etc/X11/xorg.conf/10-monitor.conf" config. file.
But, one question remain : when i exit from Xwindows (cli only), my dual monitor is going back to "twinview" (same screen for both monitors). Is it possible to have a "xinerama" view (2 independants Cli screens) in command line only (like in Xwindows)?
if yes , what can i do / install / run or configure to achieve this goal ?
ps : im not taking about alt-f1-f2-f3 switching tty or the "screen" command, but a way to handle 2 monitors in Linux command line....
Thanks !!!
DomHmm, I remember when I first set up Arch linux It would do wired things with the video in X, screens weren't layed out correctly, and I couldn't get all 3 to work ( Only 2 ) So I needed to switch to the "Offical" drivers, It works well and I play games so I would've done it anyways, I'm not sure what you plan on doing with your computer ( Games, just internet, media ) but the "offical" drivers might be worth a shot.
Here's the wiki on the drivers you're currently using:
https://wiki.archlinux.org/index.php/ATI
and the one's that AMD created:
https://wiki.archlinux.org/index.php/ATI_Catalyst
I used the repository method, and It's working fine for me. I will say that in general although the open source drivers work really well and KMS is just awesome! ( It takes almost 10 seconds to switch from X to a tty for me right now ) The ATI drivers are sometimes just less problems. -
Dual Monitors without Xorg.conf Help
I have an Acer Aspire One and Im trying to setup Dual Displays. Every guide Ive found, including the Acer One Article in the Wiki talks about editing the Xorg.conf file, yet my system seems to be running without one. Other than problems setting up the dual displays I dont have any issues with Display Settings so it seems my installation of arch linux seems to be using some other technology other than Xorg. Does any one know how the Display settings are setup without the use of the Xorg.conf file ? This is a fresh Arch Linux Base Install using only OpenBox.
Ive also tried using XRandR to setup my dual displays but I keep getting an error and google doesnt provide an answer.
I try and run the following command ( wich works fine on my other PC )
[zero@zero ~]$ xrandr --auto --output LVDS1 --mode 1024x600 --right-of VGA1
And get the following error
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 149 (RANDR)
Minor opcode of failed request: 7 (RRSetScreenSize)
Serial number of failed request: 24
Current serial number in output stream: 25
Any help would be appreciated. Thanks
Last edited by devspyder (2010-07-18 19:08:32)WooHoo !
awkwood - You Rock ! I feel like an idiot for not paying closer attention to your first post. I finally realized what you were saying and figured out how to do the downgrade.
If it's 2.12.0 I'd suggest trying 2.11.0 instead.
The most recent update borked my dual display with a similar error message but 2.11 works fine.
I don't use an xorg.conf.
So essentially this seems to be a bug with version 2.12 of the xf86-video-intel driver. I downgraded to ver 2.11 and everything works perfectly. I am running dual monitors at full resolution with no fuss. So again awkwood I thank you !
For other Arch Newbies who have this issue in the mean time until they fix the bug, this is how I did the downgrade.
Step 1:
download the 2.11 package from the link below
http://arm.konnichi.com/extra/os/i686/x … pkg.tar.xz
Step 2:
Open a terminal and cd to the directory where you saved the file
$ cd /home/$USERNAME/Downloads
Step 3:
Use pacman to install the package
sudo pacman -U xf86-video-intel-2.11.0-2-i686.pkg.tar.xz
Finally reboot. When you log back in everything should work fine
Again thanks to awkwood as well as karol, blind, Inxsible and everyone else for their help. Everyone here is so helpful, I am defiantly an Arch user for life. Hopefully they will fix the bug in the next version of the driver. My next step is to see about filling a bug report. -
[SOLVED]Getting Dual Monitors To With Nvidia Cards Under Arch
Just got a second monitor and I am trying to set it up to work with arch.
I have 2 nvidia cards with 1 monitor plugged into each.
Reading through the wiki: https://wiki.archlinux.org/index.php/DualScreen
When I try
xrandr -q
after downloading and installing:
pacman -S xorg-xrandr arandr
I get the message:
RandR extension missing
So not sure what is going on here... (***EDIT: Worked after rebooting***)
Output for:
xrandr -q
is:
Screen 0: minimum 8 x 8, current 1920 x 1200, maximum 16384 x 16384
DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 60.0*+
1920x1080 50.0
1680x1050 60.0
1600x1200 60.0
1440x900 75.0 59.9
1280x1024 75.0 60.0
1280x960 60.0
1280x800 59.8
1280x720 60.0 50.0
1152x864 75.0
1024x768 75.0 70.1 60.0
800x600 75.0 72.2 60.3 56.2
720x576 50.0
720x480 59.9
640x480 75.0 72.8 59.9
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-3 disconnected (normal left inverted right x axis y axis)
The above indicates, I believe, that arch is not seeing my second monitor...
However, it does see both monitors when I plug them both into 1 card:
Screen 0: minimum 8 x 8, current 1920 x 1200, maximum 16384 x 16384
DVI-I-0 disconnected primary (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 520mm x 320mm
1920x1200 60.0*+
1920x1080 50.0
1680x1050 60.0
1600x1200 60.0
1440x900 75.0 59.9
1280x1024 75.0 60.0
1280x960 60.0
1280x800 59.8
1280x720 60.0 50.0
1152x864 75.0
1024x768 75.0 70.1 60.0
800x600 75.0 72.2 60.3 56.2
720x576 50.0
720x480 59.9
640x480 75.0 72.8 59.9
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-3 connected (normal left inverted right x axis y axis)
1920x1200 60.0 +
1600x1200 60.0
1280x1024 60.0
1280x960 60.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
Since I have 2 gfx cards the card info is:
02:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1)
Since I am using 2 different cards I am supposed to add:
Section "Device"
Identifier "Screen0"
Driver "nvidia"
BusID "PCI:02:00.0"
EndSection
Section "Device"
Identifier "Screen1"
Driver "nvidia"
BusID "PCI:03:00.0"
EndSection
To:
/etc/X11/xorg.conf.d/10-monitor.conf
Section "ServerLayout"
Identifier "DualSreen"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0" #Screen1 at the right of Screen0
Option "Xinerama" "1" #To move windows between screens
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "Enable" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "Enable" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
Modes "1280x800_75.00"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I am not clear on how to merge these two snippets together properly...
To be honest I am somewhat confused about this whole process... If anyone has a more clear link or can explain the steps better to me I would greatly appreciate it. Maybe I just have to read through it a few more times. Thanks in advance.
Last edited by soulrainX (2013-05-07 13:17:38)This is how I have it thus far:
/etc/X11/xorg.conf.d/10-monitor.conf
Section "ServerLayout"
Identifier "DualSreen"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0" #Screen1 at the right of Screen0
Option "Xinerama" "1" #To move windows between screens
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "Enable" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "Enable" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
BusID "PCI:02:00.0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
BusID "PCI:03:00.0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
Modes "1920x1200_75.00"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
EndSubSection
EndSection -
Need help with dual monitor setup for KDE 3.5.5.
Here's my hardware:
NEC MultiSync LCD 1530V: 1024x768 (analog)
Samsung SyncMaster 941BW: 1440x900 (digital)
nVidia Dual head AGP video card.
The dual monitor works under dual-boot Windows, boot up and pure Linux console. I've googled around for help, changed my xorg.conf file accordingly to some sites, but it wasn't much help.
Here's my working xorg.conf:
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Device"
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Using this xorg.conf file, only my NEC LCD analog monitor could display KDE while the Samsung digital can't.
Any suggestions?Thanks for your help guys, I'm halfway there.
The second monitor shows the KDE desktop, but it isn't exactly what I expected. Right now, both monitors display at 1024x768 (each) or 2048x768 (total). The larger monitor stretches and distorts the display of 1024x768 to its natural resolution at 1440x900 and it isn't what I wanted. Other than that, the dual desktop setup behaves what I expected to.
Here's a snippet of my xorg.conf that currently works:
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "Samsung SyncMaster"
HorizSync 31.5 - 60
VertRefresh 60.0 - 70.0
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
Option "TwinView" "true"
Option "TwinViewOrientation" "LeftOf"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
# Option "MetaModes" "1440x900, 1440x900; 1024x768, 1024x768"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 2"
Device "NVIDIA GeForce"
Monitor "Samsung SyncMaster"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1440x900"
EndSubSection
EndSection
Anyone have an idea?
EDIT: Oh snaps. I just did a pacman -Syu and it upgraded Arch Linux to 0.8 and the 2nd monitor stopped working. -
Cannot configure X for dual monitor
Hello, I just reinstalled my Arch and I'm trying to configure X with a dual monitor setup using nouveau driver.
This is what I get after login:
This is what I get after using xrandr to setup:
xrandr --output HDMI-1 --left-of VGA-1
This is the content of /etc/X11/xorg.conf.d/20-nouveau.conf
Section "Monitor"
Identifier "Asus"
Option "LeftOf" "Dell"
Option "Primary" "False"
EndSection
Section "Monitor"
Identifier "Dell"
Option "Primary" "false"
EndSection
Section "Device"
Identifier "Card"
Driver "nouveau"
Option "monitor-VGA-1" "Dell"
Option "monitor-HDMI-1" "Asus"
EndSection
Section "Screen"
Identifier "Screen"
Device "Card"
Monitor "Dell"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080" "1680x1050"
Virtual 3600 1080
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen"
EndSection
This is the content of the X log from start till xrandr command
[ 10.963]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 10.963]
X.Org X Server 1.12.3.901 (1.12.4 RC 1)
Release Date: 2012-08-03
[ 10.963] X Protocol Version 11, Revision 0
[ 10.963] Build Operating System: Linux 3.4.4-2-ARCH x86_64
[ 10.963] Current Operating System: Linux markus 3.4.8-1-ARCH #1 SMP PREEMPT Thu Aug 9 21:21:22 CEST 2012 x86_64
[ 10.963] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1019adcf-1c5a-4321-b685-a0b1ee8185d8 ro quiet
[ 10.963] Build Date: 09 August 2012 10:04:44AM
[ 10.963]
[ 10.963] Current version of pixman: 0.26.2
[ 10.963] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 10.963] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 10.963] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 16 17:44:51 2012
[ 11.022] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.066] (==) ServerLayout "Default Layout"
[ 11.066] (**) |-->Screen "Screen" (0)
[ 11.066] (**) | |-->Monitor "Dell"
[ 11.067] (**) | |-->Device "Card"
[ 11.067] (==) Automatically adding devices
[ 11.067] (==) Automatically enabling devices
[ 11.141] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11.141] Entry deleted from font path.
[ 11.141] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 11.141] Entry deleted from font path.
[ 11.141] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11.141] Entry deleted from font path.
[ 11.141] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11.141] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11.141] Entry deleted from font path.
[ 11.141] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11.141] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 11.141] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.141] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.141] (II) Loader magic: 0x7c8b00
[ 11.141] (II) Module ABI versions:
[ 11.141] X.Org ANSI C Emulation: 0.4
[ 11.141] X.Org Video Driver: 12.1
[ 11.141] X.Org XInput driver : 16.0
[ 11.141] X.Org Server Extension : 6.0
[ 11.143] (--) PCI:*(0:2:0:0) 10de:0848:1043:82e2 rev 162, Mem @ 0xfb000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[ 11.143] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 11.143] (II) LoadModule: "extmod"
[ 11.144] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 11.179] (II) Module extmod: vendor="X.Org Foundation"
[ 11.179] compiled for 1.12.3.901, module version = 1.0.0
[ 11.179] Module class: X.Org Server Extension
[ 11.179] ABI class: X.Org Server Extension, version 6.0
[ 11.179] (II) Loading extension MIT-SCREEN-SAVER
[ 11.179] (II) Loading extension XFree86-VidModeExtension
[ 11.179] (II) Loading extension XFree86-DGA
[ 11.179] (II) Loading extension DPMS
[ 11.179] (II) Loading extension XVideo
[ 11.179] (II) Loading extension XVideo-MotionCompensation
[ 11.179] (II) Loading extension X-Resource
[ 11.179] (II) LoadModule: "dbe"
[ 11.179] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 11.183] (II) Module dbe: vendor="X.Org Foundation"
[ 11.183] compiled for 1.12.3.901, module version = 1.0.0
[ 11.183] Module class: X.Org Server Extension
[ 11.183] ABI class: X.Org Server Extension, version 6.0
[ 11.183] (II) Loading extension DOUBLE-BUFFER
[ 11.183] (II) LoadModule: "glx"
[ 11.183] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.209] (II) Module glx: vendor="X.Org Foundation"
[ 11.209] compiled for 1.12.3.901, module version = 1.0.0
[ 11.209] ABI class: X.Org Server Extension, version 6.0
[ 11.209] (==) AIGLX enabled
[ 11.209] (II) Loading extension GLX
[ 11.209] (II) LoadModule: "record"
[ 11.210] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 11.217] (II) Module record: vendor="X.Org Foundation"
[ 11.217] compiled for 1.12.3.901, module version = 1.13.0
[ 11.217] Module class: X.Org Server Extension
[ 11.217] ABI class: X.Org Server Extension, version 6.0
[ 11.217] (II) Loading extension RECORD
[ 11.217] (II) LoadModule: "dri"
[ 11.217] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 11.236] (II) Module dri: vendor="X.Org Foundation"
[ 11.236] compiled for 1.12.3.901, module version = 1.0.0
[ 11.236] ABI class: X.Org Server Extension, version 6.0
[ 11.236] (II) Loading extension XFree86-DRI
[ 11.236] (II) LoadModule: "dri2"
[ 11.236] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 11.245] (II) Module dri2: vendor="X.Org Foundation"
[ 11.245] compiled for 1.12.3.901, module version = 1.2.0
[ 11.245] ABI class: X.Org Server Extension, version 6.0
[ 11.245] (II) Loading extension DRI2
[ 11.245] (II) LoadModule: "nouveau"
[ 11.255] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 11.282] (II) Module nouveau: vendor="X.Org Foundation"
[ 11.282] compiled for 1.12.2, module version = 1.0.1
[ 11.282] Module class: X.Org Video Driver
[ 11.282] ABI class: X.Org Video Driver, version 12.0
[ 11.282] (II) NOUVEAU driver
[ 11.282] (II) NOUVEAU driver for NVIDIA chipset families :
[ 11.282] RIVA TNT (NV04)
[ 11.282] RIVA TNT2 (NV05)
[ 11.282] GeForce 256 (NV10)
[ 11.282] GeForce 2 (NV11, NV15)
[ 11.282] GeForce 4MX (NV17, NV18)
[ 11.282] GeForce 3 (NV20)
[ 11.282] GeForce 4Ti (NV25, NV28)
[ 11.282] GeForce FX (NV3x)
[ 11.282] GeForce 6 (NV4x)
[ 11.282] GeForce 7 (G7x)
[ 11.282] GeForce 8 (G8x)
[ 11.283] GeForce GTX 200 (NVA0)
[ 11.283] GeForce GTX 400 (NVC0)
[ 11.283] (++) using VT number 7
[ 11.286] drmOpenDevice: node name is /dev/dri/card0
[ 11.286] drmOpenDevice: open result is 8, (OK)
[ 11.286] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 11.286] drmOpenDevice: node name is /dev/dri/card0
[ 11.286] drmOpenDevice: open result is 8, (OK)
[ 11.286] drmOpenByBusid: drmOpenMinor returns 8
[ 11.286] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 11.286] (II) [drm] nouveau interface version: 1.0.0
[ 11.287] (II) Loading sub module "dri"
[ 11.287] (II) LoadModule: "dri"
[ 11.287] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 11.287] (II) Module dri: vendor="X.Org Foundation"
[ 11.287] compiled for 1.12.3.901, module version = 1.0.0
[ 11.287] ABI class: X.Org Server Extension, version 6.0
[ 11.287] (II) NOUVEAU(0): Loaded DRI module
[ 11.287] drmOpenDevice: node name is /dev/dri/card0
[ 11.287] drmOpenDevice: open result is 9, (OK)
[ 11.287] drmOpenDevice: node name is /dev/dri/card0
[ 11.287] drmOpenDevice: open result is 9, (OK)
[ 11.287] drmOpenByBusid: Searching for BusID pci:0000:02:00.0
[ 11.287] drmOpenDevice: node name is /dev/dri/card0
[ 11.287] drmOpenDevice: open result is 9, (OK)
[ 11.287] drmOpenByBusid: drmOpenMinor returns 9
[ 11.287] drmOpenByBusid: drmGetBusid reports pci:0000:02:00.0
[ 11.287] (II) [drm] DRM interface version 1.4
[ 11.287] (II) [drm] DRM open master succeeded.
[ 11.287] (--) NOUVEAU(0): Chipset: "NVIDIA NVaa"
[ 11.287] (**) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 11.287] (==) NOUVEAU(0): RGB weight 888
[ 11.287] (==) NOUVEAU(0): Default visual is TrueColor
[ 11.287] (==) NOUVEAU(0): Using HW cursor
[ 11.287] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 11.287] (==) NOUVEAU(0): Page flipping enabled
[ 11.288] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 11.327] (II) NOUVEAU(0): Output VGA-1 using monitor section Dell
[ 11.327] (**) NOUVEAU(0): Option "Primary" "false"
[ 11.381] (II) NOUVEAU(0): Output HDMI-1 using monitor section Asus
[ 11.381] (**) NOUVEAU(0): Option "LeftOf" "Dell"
[ 11.381] (**) NOUVEAU(0): Option "Primary" "False"
[ 11.410] (II) NOUVEAU(0): EDID for output VGA-1
[ 11.410] (II) NOUVEAU(0): Manufacturer: DEL Model: 4066 Serial#: 825569612
[ 11.410] (II) NOUVEAU(0): Year: 2011 Week: 35
[ 11.410] (II) NOUVEAU(0): EDID Version: 1.3
[ 11.410] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 11.410] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
[ 11.410] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
[ 11.410] (II) NOUVEAU(0): Gamma: 2.20
[ 11.410] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 11.410] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 11.410] (II) NOUVEAU(0): redX: 0.633 redY: 0.340 greenX: 0.319 greenY: 0.621
[ 11.410] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.042 whiteX: 0.313 whiteY: 0.328
[ 11.410] (II) NOUVEAU(0): Supported established timings:
[ 11.410] (II) NOUVEAU(0): 720x400@70Hz
[ 11.410] (II) NOUVEAU(0): 640x480@60Hz
[ 11.410] (II) NOUVEAU(0): 640x480@75Hz
[ 11.410] (II) NOUVEAU(0): 800x600@60Hz
[ 11.410] (II) NOUVEAU(0): 800x600@75Hz
[ 11.410] (II) NOUVEAU(0): 1024x768@60Hz
[ 11.410] (II) NOUVEAU(0): 1024x768@75Hz
[ 11.410] (II) NOUVEAU(0): 1280x1024@75Hz
[ 11.410] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 11.410] (II) NOUVEAU(0): Supported standard timings:
[ 11.410] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 11.410] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 11.410] (II) NOUVEAU(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 11.410] (II) NOUVEAU(0): Supported detailed timing:
[ 11.410] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 509 x 286 mm
[ 11.410] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 11.410] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 11.410] (II) NOUVEAU(0): Serial No: WPDV118P151L
[ 11.410] (II) NOUVEAU(0): Monitor name: DELL P2311H
[ 11.410] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 11.410] (II) NOUVEAU(0): EDID (in hex):
[ 11.410] (II) NOUVEAU(0): 00ffffffffffff0010ac66404c313531
[ 11.410] (II) NOUVEAU(0): 231501030e331d78ea0cb4a257519f27
[ 11.410] (II) NOUVEAU(0): 0a5054a54b00714f8180d1c001010101
[ 11.410] (II) NOUVEAU(0): 010101010101023a801871382d40582c
[ 11.410] (II) NOUVEAU(0): 4500fd1e1100001e000000ff00575044
[ 11.410] (II) NOUVEAU(0): 56313138503135314c0a000000fc0044
[ 11.410] (II) NOUVEAU(0): 454c4c205032333131480a20000000fd
[ 11.410] (II) NOUVEAU(0): 00384c1e5311000a2020202020200054
[ 11.410] (II) NOUVEAU(0): EDID vendor "DEL", prod id 16486
[ 11.426] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 11.426] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 11.426] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 11.426] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 11.426] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.426] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11.426] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.426] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11.426] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 11.426] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 11.426] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 11.427] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 11.427] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz UeP)
[ 11.427] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.427] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11.481] (II) NOUVEAU(0): EDID for output HDMI-1
[ 11.481] (II) NOUVEAU(0): Manufacturer: ACI Model: 22f1 Serial#: 16843009
[ 11.481] (II) NOUVEAU(0): Year: 2008 Week: 31
[ 11.481] (II) NOUVEAU(0): EDID Version: 1.3
[ 11.481] (II) NOUVEAU(0): Digital Display Input
[ 11.481] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 11.481] (II) NOUVEAU(0): Gamma: 2.20
[ 11.481] (II) NOUVEAU(0): DPMS capabilities: Off
[ 11.481] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 11.481] (II) NOUVEAU(0): Default color space is primary color space
[ 11.481] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 11.481] (II) NOUVEAU(0): redX: 0.649 redY: 0.335 greenX: 0.283 greenY: 0.605
[ 11.481] (II) NOUVEAU(0): blueX: 0.151 blueY: 0.073 whiteX: 0.313 whiteY: 0.329
[ 11.481] (II) NOUVEAU(0): Supported established timings:
[ 11.481] (II) NOUVEAU(0): 720x400@70Hz
[ 11.481] (II) NOUVEAU(0): 640x480@60Hz
[ 11.481] (II) NOUVEAU(0): 640x480@67Hz
[ 11.481] (II) NOUVEAU(0): 640x480@72Hz
[ 11.481] (II) NOUVEAU(0): 640x480@75Hz
[ 11.481] (II) NOUVEAU(0): 800x600@56Hz
[ 11.481] (II) NOUVEAU(0): 800x600@60Hz
[ 11.481] (II) NOUVEAU(0): 800x600@72Hz
[ 11.481] (II) NOUVEAU(0): 800x600@75Hz
[ 11.481] (II) NOUVEAU(0): 832x624@75Hz
[ 11.481] (II) NOUVEAU(0): 1024x768@60Hz
[ 11.481] (II) NOUVEAU(0): 1024x768@70Hz
[ 11.481] (II) NOUVEAU(0): 1024x768@75Hz
[ 11.481] (II) NOUVEAU(0): 1280x1024@75Hz
[ 11.481] (II) NOUVEAU(0): 1152x864@75Hz
[ 11.481] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 11.481] (II) NOUVEAU(0): Supported standard timings:
[ 11.481] (II) NOUVEAU(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 11.481] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 11.481] (II) NOUVEAU(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 11.481] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 11.481] (II) NOUVEAU(0): #4: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 11.481] (II) NOUVEAU(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 11.481] (II) NOUVEAU(0): Supported detailed timing:
[ 11.481] (II) NOUVEAU(0): clock: 146.2 MHz Image Size: 474 x 296 mm
[ 11.481] (II) NOUVEAU(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0
[ 11.481] (II) NOUVEAU(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0
[ 11.481] (II) NOUVEAU(0): Serial No: 88LMVD003225
[ 11.481] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 175 MHz
[ 11.481] (II) NOUVEAU(0): Monitor name: ASUS-LS221Hÿÿ
[ 11.481] (II) NOUVEAU(0): Supported detailed timing:
[ 11.481] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 474 x 296 mm
[ 11.481] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 11.481] (II) NOUVEAU(0): v_active: 1080 v_sync: 1089 v_sync_end 1095 v_blanking: 1125 v_border: 0
[ 11.481] (II) NOUVEAU(0): Supported detailed timing:
[ 11.481] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 474 x 296 mm
[ 11.481] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 11.481] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 11.481] (II) NOUVEAU(0): Supported detailed timing:
[ 11.481] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 474 x 296 mm
[ 11.481] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 11.481] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 11.481] (II) NOUVEAU(0): Supported detailed timing:
[ 11.481] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 474 x 296 mm
[ 11.481] (II) NOUVEAU(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 11.481] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 11.481] (II) NOUVEAU(0): Supported detailed timing:
[ 11.481] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 474 x 296 mm
[ 11.481] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 11.481] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 11.481] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[ 11.482] (II) NOUVEAU(0): EDID (in hex):
[ 11.482] (II) NOUVEAU(0): 00ffffffffffff000469f12201010101
[ 11.482] (II) NOUVEAU(0): 1f120103802f1e782e78f5a655489b26
[ 11.482] (II) NOUVEAU(0): 125054bfef80b30081809500950f9040
[ 11.482] (II) NOUVEAU(0): 714f0101010121399030621a274068b0
[ 11.482] (II) NOUVEAU(0): 3600da281100001c000000ff0038384c
[ 11.482] (II) NOUVEAU(0): 4d56443030333232350a000000fd0038
[ 11.482] (II) NOUVEAU(0): 4b1f5111000a202020202020000000fc
[ 11.482] (II) NOUVEAU(0): 00415355532d4c5332323148ffff0107
[ 11.482] (II) NOUVEAU(0): Printing probed modes for output HDMI-1
[ 11.482] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz UeP)
[ 11.482] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz eP)
[ 11.482] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1089 1095 1125 -hsync -vsync (67.5 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1440x576"x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "1440x480"x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.482] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11.482] (II) NOUVEAU(0): Output VGA-1 connected
[ 11.482] (II) NOUVEAU(0): Output HDMI-1 connected
[ 11.482] (II) NOUVEAU(0): Using user preference for initial modes
[ 11.482] (II) NOUVEAU(0): Output VGA-1 using initial mode 1920x1080
[ 11.482] (II) NOUVEAU(0): Output HDMI-1 using initial mode 1920x1080
[ 11.482] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 11.482] (--) NOUVEAU(0): Virtual size is 3600x1080 (pitch 0)
[ 11.482] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[ 11.482] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz UeP)
[ 11.482] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 11.482] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 11.482] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 11.482] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 11.482] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 11.482] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 11.482] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 11.482] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 11.482] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 11.482] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 11.482] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 11.482] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 11.482] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 11.482] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 11.482] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 11.482] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 11.482] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 11.482] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 11.482] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 11.482] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 11.482] (**) NOUVEAU(0): Display dimensions: (510, 290) mm
[ 11.482] (**) NOUVEAU(0): DPI set to (179, 94)
[ 11.482] (II) Loading sub module "fb"
[ 11.482] (II) LoadModule: "fb"
[ 11.496] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.507] (II) Module fb: vendor="X.Org Foundation"
[ 11.508] compiled for 1.12.3.901, module version = 1.0.0
[ 11.508] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.508] (II) Loading sub module "exa"
[ 11.508] (II) LoadModule: "exa"
[ 11.508] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 11.517] (II) Module exa: vendor="X.Org Foundation"
[ 11.517] compiled for 1.12.3.901, module version = 2.5.0
[ 11.517] ABI class: X.Org Video Driver, version 12.1
[ 11.517] (II) Loading sub module "shadowfb"
[ 11.517] (II) LoadModule: "shadowfb"
[ 11.517] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 11.522] (II) Module shadowfb: vendor="X.Org Foundation"
[ 11.522] compiled for 1.12.3.901, module version = 1.0.0
[ 11.522] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.522] (--) Depth 24 pixmap format is 32 bpp
[ 11.523] (II) NOUVEAU(0): Opened GPU channel 2
[ 11.527] (II) NOUVEAU(0): [DRI2] Setup complete
[ 11.527] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 11.527] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 11.529] (II) EXA(0): Driver allocated offscreen pixmaps
[ 11.529] (II) EXA(0): Driver registered support for the following operations:
[ 11.529] (II) Solid
[ 11.529] (II) Copy
[ 11.529] (II) Composite (RENDER acceleration)
[ 11.529] (II) UploadToScreen
[ 11.529] (II) DownloadFromScreen
[ 11.529] (==) NOUVEAU(0): Backing store disabled
[ 11.529] (==) NOUVEAU(0): Silken mouse enabled
[ 11.529] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 11.529] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 11.529] (==) NOUVEAU(0): DPMS enabled
[ 11.529] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 11.529] (WW) NOUVEAU(0): Option "Primary" is not used
[ 11.529] (--) RandR disabled
[ 11.529] (II) Initializing built-in extension Generic Event Extension
[ 11.529] (II) Initializing built-in extension SHAPE
[ 11.530] (II) Initializing built-in extension MIT-SHM
[ 11.530] (II) Initializing built-in extension XInputExtension
[ 11.530] (II) Initializing built-in extension XTEST
[ 11.530] (II) Initializing built-in extension BIG-REQUESTS
[ 11.530] (II) Initializing built-in extension SYNC
[ 11.530] (II) Initializing built-in extension XKEYBOARD
[ 11.530] (II) Initializing built-in extension XC-MISC
[ 11.530] (II) Initializing built-in extension SECURITY
[ 11.530] (II) Initializing built-in extension XINERAMA
[ 11.530] (II) Initializing built-in extension XFIXES
[ 11.530] (II) Initializing built-in extension RENDER
[ 11.530] (II) Initializing built-in extension RANDR
[ 11.530] (II) Initializing built-in extension COMPOSITE
[ 11.530] (II) Initializing built-in extension DAMAGE
[ 11.843] (EE) AIGLX error: Calling driver entry point failed
[ 11.852] (EE) AIGLX: reverting to software rendering
[ 11.852] (II) AIGLX: Screen 0 is not DRI capable
[ 12.107] (II) AIGLX: Loaded and initialized swrast
[ 12.107] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 12.120] (II) NOUVEAU(0): NVEnterVT is called.
[ 12.331] (II) NOUVEAU(0): Setting screen physical size to 1016 x 285
[ 12.331] resize called 3840 1080
[ 12.709] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 12.709] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12.709] (II) LoadModule: "evdev"
[ 12.709] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 12.748] (II) Module evdev: vendor="X.Org Foundation"
[ 12.748] compiled for 1.12.3.901, module version = 2.7.3
[ 12.748] Module class: X.Org XInput Driver
[ 12.748] ABI class: X.Org XInput driver, version 16.0
[ 12.748] (II) Using input driver 'evdev' for 'Power Button'
[ 12.748] (**) Power Button: always reports core events
[ 12.748] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 12.748] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12.748] (--) evdev: Power Button: Found keys
[ 12.748] (II) evdev: Power Button: Configuring as keyboard
[ 12.748] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 12.748] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 12.748] (**) Option "xkb_rules" "evdev"
[ 12.748] (**) Option "xkb_model" "evdev"
[ 12.748] (**) Option "xkb_layout" "it"
[ 12.792] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 12.792] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 12.792] (II) Using input driver 'evdev' for 'Video Bus'
[ 12.792] (**) Video Bus: always reports core events
[ 12.792] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 12.792] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 12.792] (--) evdev: Video Bus: Found keys
[ 12.792] (II) evdev: Video Bus: Configuring as keyboard
[ 12.792] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:19/LNXVIDEO:00/input/input6/event6"
[ 12.792] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 12.793] (**) Option "xkb_rules" "evdev"
[ 12.793] (**) Option "xkb_model" "evdev"
[ 12.793] (**) Option "xkb_layout" "it"
[ 12.794] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 12.794] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 12.794] (II) Using input driver 'evdev' for 'Power Button'
[ 12.794] (**) Power Button: always reports core events
[ 12.794] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 12.794] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 12.794] (--) evdev: Power Button: Found keys
[ 12.794] (II) evdev: Power Button: Configuring as keyboard
[ 12.794] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 12.794] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 12.794] (**) Option "xkb_rules" "evdev"
[ 12.794] (**) Option "xkb_model" "evdev"
[ 12.794] (**) Option "xkb_layout" "it"
[ 12.796] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event0)
[ 12.796] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 12.796] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[ 12.796] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[ 12.796] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event0"
[ 12.796] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc043
[ 12.796] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
[ 12.796] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[ 12.796] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[ 12.796] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[ 12.796] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[ 12.796] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[ 12.796] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[ 12.796] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 12.796] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input0/event0"
[ 12.796] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[ 12.796] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[ 12.796] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[ 12.796] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[ 12.796] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[ 12.796] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[ 12.797] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[ 12.797] (II) No input driver specified, ignoring this device.
[ 12.797] (II) This device may have been added with another device file.
[ 12.797] (II) config/udev: Adding input device LOGITECH G110 G-keys (/dev/input/event1)
[ 12.797] (**) LOGITECH G110 G-keys: Applying InputClass "evdev keyboard catchall"
[ 12.797] (II) Using input driver 'evdev' for 'LOGITECH G110 G-keys'
[ 12.797] (**) LOGITECH G110 G-keys: always reports core events
[ 12.797] (**) evdev: LOGITECH G110 G-keys: Device: "/dev/input/event1"
[ 12.797] (--) evdev: LOGITECH G110 G-keys: Vendor 0x46d Product 0xc22b
[ 12.797] (--) evdev: LOGITECH G110 G-keys: Found keys
[ 12.797] (II) evdev: LOGITECH G110 G-keys: Configuring as keyboard
[ 12.797] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.1/1-2.1:1.0/input/input1/event1"
[ 12.797] (II) XINPUT: Adding extended input device "LOGITECH G110 G-keys" (type: KEYBOARD, id 10)
[ 12.797] (**) Option "xkb_rules" "evdev"
[ 12.797] (**) Option "xkb_model" "evdev"
[ 12.797] (**) Option "xkb_layout" "it"
[ 12.797] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event2)
[ 12.797] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 12.797] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
[ 12.797] (**) Gaming Keyboard G110: always reports core events
[ 12.797] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event2"
[ 12.797] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
[ 12.797] (--) evdev: Gaming Keyboard G110: Found keys
[ 12.797] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
[ 12.797] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.3/1-2.3:1.0/input/input2/event2"
[ 12.797] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 11)
[ 12.797] (**) Option "xkb_rules" "evdev"
[ 12.797] (**) Option "xkb_model" "evdev"
[ 12.797] (**) Option "xkb_layout" "it"
[ 12.798] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event3)
[ 12.798] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 12.798] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
[ 12.798] (**) Gaming Keyboard G110: always reports core events
[ 12.798] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event3"
[ 12.798] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
[ 12.798] (--) evdev: Gaming Keyboard G110: Found keys
[ 12.798] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
[ 12.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.3/1-2.3:1.1/input/input3/event3"
[ 12.798] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 12)
[ 12.798] (**) Option "xkb_rules" "evdev"
[ 12.798] (**) Option "xkb_model" "evdev"
[ 12.798] (**) Option "xkb_layout" "it"
[ 12.798] (II) config/udev: Adding input device UVC Camera (046d:081b) (/dev/input/event7)
[ 12.798] (**) UVC Camera (046d:081b): Applying InputClass "evdev keyboard catchall"
[ 12.798] (II) Using input driver 'evdev' for 'UVC Camera (046d:081b)'
[ 12.798] (**) UVC Camera (046d:081b): always reports core events
[ 12.798] (**) evdev: UVC Camera (046d:081b): Device: "/dev/input/event7"
[ 12.798] (--) evdev: UVC Camera (046d:081b): Vendor 0x46d Product 0x81b
[ 12.798] (--) evdev: UVC Camera (046d:081b): Found keys
[ 12.798] (II) evdev: UVC Camera (046d:081b): Configuring as keyboard
[ 12.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2.2/2-2.2:1.0/input/input7/event7"
[ 12.798] (II) XINPUT: Adding extended input device "UVC Camera (046d:081b)" (type: KEYBOARD, id 13)
[ 12.798] (**) Option "xkb_rules" "evdev"
[ 12.798] (**) Option "xkb_model" "evdev"
[ 12.798] (**) Option "xkb_layout" "it"
[ 84.333] (II) NOUVEAU(0): NVLeaveVT is called.
[ 144.460] (II) NOUVEAU(0): NVEnterVT is called.
[ 144.544] (II) NOUVEAU(0): EDID vendor "DEL", prod id 16486
[ 144.544] (II) NOUVEAU(0): Using hsync ranges from config file
[ 144.544] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 144.544] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 144.544] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 144.544] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 144.544] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 144.544] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 144.544] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 144.544] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 144.544] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 144.544] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 144.544] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 144.544] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 144.544] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 144.544] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 154.758] (II) NOUVEAU(0): EDID vendor "DEL", prod id 16486
[ 154.758] (II) NOUVEAU(0): Using hsync ranges from config file
[ 154.758] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 154.758] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 154.758] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 154.758] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 154.758] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 154.758] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 154.758] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 154.758] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 154.758] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 154.758] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 154.758] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 154.758] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 154.758] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 154.758] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 154.880] resize called 1920 1080
[ 233.862] (II) NOUVEAU(0): EDID vendor "DEL", prod id 16486
[ 233.862] (II) NOUVEAU(0): Using hsync ranges from config file
[ 233.862] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 233.862] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 233.862] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 233.862] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 233.862] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 233.862] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 233.862] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 233.862] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 233.862] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 233.862] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 233.862] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 233.862] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 233.862] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 233.862] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 233.920] resize called 3600 1080
Any hints on what it's not working? I use Slim as login manager, and when it comes up, the left screen only show a small portion of the screen.Option "monitor-VGA-1" "Dell"
Option "monitor-HDMI-1" "Asus"
Do you need the word monitor in there? I was under the impression you only needed "VGA-1". I'm having a similar problem to you though so don't take my advice too carefully (why didn't I back up my old conf file :'()
Edit; You do.
Here is my krandrrc from when I used KDE. Could you put something in your autostart as a hack?
[Display]
ApplyOnStartup=true
StartupCommands=xrandr --output VGA-1 --pos 1920x0 --mode 1440x900 --refresh 59.8874\nxrandr --output DVI-I-1 --pos 0x0 --mode 1920x1080 --refresh 60\nxrandr --output VGA-1 --primary
[Screen_0]
OutputsUnified=false
UnifiedRect=0,0,0,0
UnifiedRotation=1
[Screen_0_Output_DVI-I-1]
Active=true
Rect=0,0,1920,1080
RefreshRate=60
Rotation=1
[Screen_0_Output_VGA-1]
Active=true
Rect=1920,0,1440,900
RefreshRate=59.8874435424805
Rotation=1
Last edited by SS4 (2012-08-16 23:49:09) -
Would be grateful for help configuring my 7950gx2 for dual monitor
Hi guys,
I have two monitors - one widescreen TFT 20" DVI (max 1680x1050), and one 17" TFT Analog (max 1280x1024).
Currently I'm running just on my widescreen monitor, but would love to have both monitors enabled to facilitate my spare-time web design.
I have an nVidia 7950GX2 - the card is essentially two 7900GT(X)s SLI'd together. So it is a multi-GPU card, rather than me having two separate graphics cards in my system.
I've followed the Arch Wiki info regarding nVidia drivers, and have the drivers operating perfectly right now. But no matter what I do, even if I follow the Gentoo Wiki info on dual monitors, I can't get both monitors to operate; it's either one or neither.
Here's my current xorg.conf :
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "record"
Load "xtrap"
#Load "dri"
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "dvorak"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Analog TFT"
VendorName "Blue Mountain"
ModelName "MT17XP"
EndSection
Section "Monitor"
Identifier "Widescreen DVI"
VendorName "LG"
ModelName "L204WT"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:6:0:0"
Option "NoLogo" "True"
Option "MultiGPU" "AFR"
Option "sli" "off"
Option "RenderAccel" "true"
#other options I recommend:
Option "HWcursor"
Option "CursorShadow"
Option "CursorShadowAlpha" "32"
Option "CursorShadowXOffset" "3"
Option "CursorShadowYOffset" "3"
#if you want Composite and GLX (they don't cooperate):
Option "AllowGLXWithComposite"
#the TwinView stuff
Option "TwinView" "true"
Option "MetaModes" "DFP: 1680x1050, CRT: NULL"
Option "TwinViewOrientation" "DFP RightOf CRT"
Option "TwinViewXineramaInfoOrder" "DFP"
Option "HorizSync" "DFP: 30.0 - 83.0; CRT: 31.5 - 80"
Option "VertRefresh" "DFP: 56.0 - 75.0; CRT: 56.0 - 75.0"
EndSection
Section "Device"
Identifier "Card1"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:5:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Analog TFT"
EndSection
When I change
Option "MetaModes" "DFP: 1680x1050, CRT: NULL"
to
Option "MetaModes" "DFP: 1680x1050, CRT: 1280x1024"
I still only get my widescreen coming on.
When I change
Option "TwinViewXineramaInfoOrder" "DFP"
Option "TwinViewXineramaInfoOrder" "DFP, CRT"
then only my widescreen comes on again. Swapping the arguments means only my small TFT comes on.
I'd be very grateful for help fixing this; I'm happy to follow any instructions you want, so I'll just be patient and wait for orders
- KDI took the liberty to modify the relevant parts of the original xorg.conf file based on mine (I have a TwinView setup, but with identical monitors). Since bwalk has a similar setup to yours, you should try that first. If you still have problems for some reason, you can try the sections below.
I assume that the HorizSync and VertRefresh values are correct for your system, so I just used the original values as well (if you didn't set them, you might want to double check just to be sure). I commented out certain lines that seemed to be set by the program that created the config file, so if you need them, uncomment them...I just wanted to clean it up a bit. Again, understood that the CRT is on the left and the DFP is on the right, so that's how the MetaModes are declared. If it's the other way around, you will have to swap the value sets. I also assume that the DFP is your main monitor, so I set the CRT to NULL for any situation that requires it.
I'm not certain about the Screen section. Since so much info is declared above it, you might be able to eliminate the SubSection part, but I'm not sure. I hope you get it working.
Section "ServerLayout"
Identifier "Server0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Device"
Identifier "Card0"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:6:0:0"
Driver "nvidia"
Option "NoLogo" "true"
Option "RenderAccel" "true"
Option "MultiGPU" "AFR"
Option "sli" "off"
Option "TwinView" "true"
Option "TwinViewOrientation" "RightOf"
Option "MetaModes" "1280x1024,1680x1050; NULL,1680x1050"
Option "ConnectedMonitor" "CRT-0, DFP-0"
Option "UseEdidFreqs" "false"
Option "HorizSync" "CRT-0: 31.5-80; DFP-0: 30-83"
Option "VertRefresh" "CRT-0: 56-75; DFP-0: 56-75"
# Option "HWcursor"
# Option "CursorShadow"
# Option "CursorShadowAlpha" "32"
# Option "CursorShadowXOffset" "3"
# Option "CursorShadowYOffset" "3"
# Option "AllowGLXWithComposite"
EndSection
Section "Device"
Identifier "Card1"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "Unknown Board"
BusID "PCI:5:0:0"
EndSection
Section "Monitor"
Identifier "CRT-0"
VendorName "Blue Mountain"
ModelName "MT17XP"
HorizSync 31.50 - 80.00
VertRefresh 56.00 - 75.00
Option "DPMS"
EndSection
Section "Monitor"
Identifier "DFP-0"
VendorName "LG Electronics"
ModelName "L204WT"
HorizSync 30.00 - 83.00
VertRefresh 56.00 - 75.00
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "CRT-0"
DefaultDepth "24"
SubSection
Depth 24
Modes "1280x1024" "1680x1050"
Viewport 0 0
EndSubSection
EndSection -
Problem setting up dual monitors
I'm having trouble setting up dual monitors.When i boot into my login screen,both monitors turn on for a second or two and then they both shut off and I'm taken to the command line.Here is my 10-monitor.conf file:
-- MOD EDIT -- Use code tags --Inxsible
Section "ServerLayout"
Identifier "DualSreen"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0" #Screen1 at the right of Screen0
Option "Xinerama" "1" #To move windows between screens
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "Enable" "true"
EndSection
Section "Monitor"
Identifier "Monitor1"
Option "Enable" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
Modes "1920x1080__60.00"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
SubSection "Display"
Depth 24
Modes "1270x720_60.00"
EndSubSection
EndSection
Last edited by unilx (2011-01-17 01:26:49)If they both turn on for a second or two and then it drops you back at the command line, it would appear that X is working ok.
What wm/de are you using? .... or maybe what login manager are you using?
Have you checked your /var/log/Xorg.0.log file to see what it says?
Normally when you are dropped to the command line, there would be an error message on the screen in front of you; it should be the same as in the log file, btw.
Also, when did this start happening?
Has it ever worked? If so, what changed? -
Gnome Crashes on Login after messing with dual monitor settings
Gnome displays the sad monitor and has the error message "..something has gone wrong..~" and will force me to log out. I've only started to experience this after messing with dual monitor settings in nvidia. The dual setup(twinview) worked but once I rebooted, I couldn't get it going for awhile.
Here's my xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 285.05.09 ([email protected]) Fri Sep 23 19:18:19 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
#Option "TwinView" "True"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I commented out below to get it in again, but it still feels shaky and unstable to log in now. Sometimes I will get the error and after a log out and login, it'll work.
#Option "TwinView" "True"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
Extra Notes: I have another desktop session with awesome installed(uninstalled now) and could log into that no problem. Awesome was giving me troubles so I uninstalled it. I have 2 gnome desktop sessions, my regular gnome session(the one that crashes), and the other with no window manager(never crashed on startup).
I installed awesome around the same time as configuring the dual monitor setup.
Thanks.Update.
The crashes are to be expected now. I'm circumventing the whole thing by logging into my other Gnome session without a window manager, logging out and then logging back into my regular Gnome with Metacity.
I've noticed the tty1 sessions(not sure what's it's called) is strange. Apparently my session runs on tty8 but when I try logging in, it'll crash me and tty7 gives me a blank screen with a blinking underscore. The other tty1s work regularly. Not sure if this has anything to do with it.
Is there a way to just reset the Gnome settings? -
[Solved]Openbox dual monitor crashing
I have been working this out for days to no avail. I have an ATI video card not using the catalyst drivers. Dual monitors worked fine in KDE without any additional setup, and no xorg.conf. In openbox i have tried with arandr, and manual. but when i enable the second monitor its seems that openbox crashes, because whatever is on the screen at the time of enabling the monitor turns to static. I think its openbox because i still have a functional mouse cursor and has proper fucntions accross both monitors in any configuration that i try. when it crashes i have to hard reboot. when i reboot with the monitor still plugged in, both lvds and vga will display a cloned image at the same resolution which is the wrong resolution for both lvds and vga.
I have googled till there is no link unclicked, and wiki give me nothing. i dont believe that i need to set up an xorg.conf as the external is detected fine. its almost like when x applies the settings it corrupts openbox.
anyone have any ideas?
Last edited by zero_one (2010-09-18 18:26:28)zero_one wrote:you mean add the monitors to a xx-monitor.conf? i can give that a try but it doesnt seem that would provide the flexibility that im looking for as sometimes i use the external monitor disabiling lvds, sometimes right of, and sometimes i use hdmi to my tv set right of, to watch movies.
I mean add the monitors to xorg.conf. Here is the xorg.conf I use with openbox (separate X display for the TV), just to give you an idea - yours will differ with ATI:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen[0]"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "ServerLayout"
Identifier "tv"
Screen 0 "Screen[1]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Module"
Load "glx"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "AutoRepeat" "210 50" #added, did no good, use ~/.xinitrc xset
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
Section "Monitor"
Identifier "Monitor[0]"
HorizSync 31.0 - 83.0
VertRefresh 55.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor[1]"
HorizSync 15.0 - 620.0
VertRefresh 15.0 - 600.0
EndSection
Section "Device"
Identifier "Device[0]"
Driver "nvidia"
BoardName "GeForce 8500 GT"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Device[1]"
Driver "nvidia"
BoardName "GeForce 8500 GT"
#adjust using 'lspci' or cat /proc/pci
BusID "PCI:1:0:0"
Option "ConnectedMonitor" "TV"
EndSection
Section "Screen"
#nvidia
Identifier "Screen[0]"
Device "Device[0]"
Monitor "Monitor[0]"
DefaultDepth 24
Option "TwinView" "0"
# Option "metamodes" "DFP: nvidia-auto-select +0+0"
Option "NoLogo" "True"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection
Section "Screen"
#nvidia
Identifier "Screen[1]"
Device "Device[1]"
Monitor "Monitor[1]"
DefaultDepth 24
Option "TwinView" "0"
Option "UseEDID" "FALSE"
Option "ConnectedMonitor" "TV"
Option "TvOutFormat" "Component"
Option "metamodes" "CRT: 1920x1080 +0+0"
Option "TVStandard" "HD1080i"
Option "RenderAccel" "True"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 24
Modes "nvidia-auto-select"
EndSubSection
EndSection
Then I start the second X display on the TV with this in openbox's autostart.sh:
(sleep 5 && xinit /usr/bin/openbox -- /usr/bin/X :1 -layout tv -nolisten tcp) &
Thus there are two instances of openbox running.
It may not give you the flexibility, but for testing it may help you narrow down what is causing the problem and find remedies.
Also, the monitor turning to static sounds more like a driver or X issue than something with openbox.
Last edited by IgnorantGuru (2010-09-18 17:46:12)
Maybe you are looking for
-
Unable to get windows xp pro to boot on partitioned hard drive
Just got an intel based Macbook Pro for the express purpose of not having to carry a Pc around as I already had a G4 Macbook Pro which works well. Spent 2 hours trying to get the window to boot as bootcamp says it should once the XP is downloaded on
-
How to restore my iPad with no the last version
After upgrade to IOS 7 My iPad become to origin settings. I tried to restore my last saved but after some problems with my computer, when I restarted it and I connect again my iPad , a new back up was done and now iTunes just let me restore this last
-
Illustrator CS5 won't save as PDF
My first post. Running AI CS5.5. All of a sudden, when I "save as" to a pdf file, the pdf content is not saved. Instead, when the file is opened, the actual document says "This is an Adobe Illustrator file that was saved without PDF Content. To place
-
My nokia lumia 520 always displaying an error code c00cee04 while accessing the store , please tell me how to fix this problum
-
How can I use the update service
Hello experts, could you please explain me how to use the update service from a business object in the VC. I have created a object which contains following attributes: - key(ID) - created by(UserID) - creted at(Datetime) - modifiedAt(Datetime) - modi