Xorg 7.0 upgraders read this

http://wiki.archlinux.org/index.php/Xorg7

This works for me, this is my contribution, I hope can help someone in troubles:
pacman -Sy
pacman -Rd xorg-server xorg-clients (if installed)
pacman -Sf xorg-xdm
pacman -S xorg-clients xorg-server
pacman -Sf xorg
pacman -Syu (upgrade all system, almost 200mb)
pacman -S xorg-fonts-75dpi
pacman -S xorg-fonts-100dpi
pacman -S libxcomposite libxss
Enter in /etc/X11/xorg.conf and reconfigure the paths so:
Section "Files"
RgbPath "/usr/share/X11/rgb"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/local/"
ModulePath "/usr/lib/xorg/modules"
EndSection
Write startx, if it doesn't works kdm or gdm, write:
mkdir -p /usr/X11R6/bin/
ln -s /usr/bin/X /usr/X11R6/bin/X
If doesn't works, control the errors, maybe it misses a file, install it with pacman.
Moreover, I've a ricompiled kernel with drivers nvidia, so I'm entered on my kernel source and I've written:
make all && make modules_install
generate-modprobe.conf
cp -f System.map /boot
cd arch/i386/boot
cp -f bzImage /boot
At this point I've rebooted and I've reinstalled Nvidia drivers:
./NVidia.xxxxxx.run (WITHOUT OVERWRITE FILE /etc/X11/xorg.conf)

Similar Messages

RE: [Adobe Reader] when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? i

HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
    when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
    created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
     To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

thank's for reply and your help
i did the step's that you told me but i still have the same problem
                                 i have the latest v.11.0.7
i
i disable the protected mode

'we had difficulty reading this feed. host parameter is null' I am getting no where here, help!?

I've had an RSS feed created for an online video podcast but keep getting the message: 'we had difficulty reading this feed. host parameter is null' i've looked at the forums but none of them make any sense. My IT team say the RSS feed is valid and it should work and that is more like down to an itunes error, any help?

This will be our first podcast so do not currently have a page. Below is the feed.
Thank you Roger.
<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
<channel>
<atom:link href="http://dmsukltd.com/rss/rss.xml" rel="self" type="application/rss+xml" />
<title>The Big Picture</title>
<link>http://www.dmsukltd.com/hawk/dms_big_picture/</link>
<description>A brand new monthly movie show produced by DMS</description>
<language>en-gb</language>
<item>
<title>The Big Picture: Mission: Impossible-Ghost Protocol first podcast</title>
<link>http://dmsukltd.com/dl/paramount/tbp_mi4gp_uk_premiere_v1_qt_hires.mov</link>
<guid>http://dmsukltd.com/dl/paramount/tbp_mi4gp_uk_premiere_v1_qt_hires.mov</guid>
<pubDate>15 Dec 2011 12:00:00 GMT</pubDate>
<description>[CDATA[The cast of Mission Impossible - Ghost Protocol joined The Big Picture on the red carpet for the films UK Premiere! Tom Cruise, Simon Pegg, Paula Patton and Samuli Edelmann were on hand to talk about this latest chapter of the popular series!]]</description>
</item>
</channel>
</rss>

"We had difficulty reading this feed. null" Atom feeds no longer work?

Hi - our Audioboo feeds used to work fine when submitting as a podcast (eg http://audioboo.fm/users/4705/boos.atom). It seems like they stopped working recently - maybe in the past couple of days - and just report "We had difficulty reading this feed. null" when you try to submit them.
I'm beginning to suspect that the use of atom rather than rss is the cause. Can anyone confirm?
-Jonathan

This feed can be subscribed to manually in iTunes (from the 'Advanced' menu) - actually I'm rather surprised it works because it isn't a valid podcast feed (though it is a valid Atom feed).
It has the iTunes 'declaration' and some itunes tags, although the former is contained in a 'feed' tag whereas it should be a 'rss' tag: there is no 'channel' tag enclosing the podcast data, no 'item' tags enclosing each episode, and no 'enclosure' tags within each episode containing the media URL. I'm not surprised you can't submit it as a podcast, and as I say it's a but surprising that the iTunes application recognizes it.
In order to get it accepted in the iTunes Store you need to create a feed in the correct format: this page contains a sample basic feed so you can see how it should look:
http://www.wilmut.org.uk/pc
If the feed contains the valid iTunes format it can also contain atom tags, which iTunes will ignore.

HT2443 loops are in the browser when you the loop message reads this file type is not supported

loops are in the browser when you the loop message reads this file type is not supported

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

"How do I defrag my mac?" "You don't need to, it does it itself" Fragmented Free Space: 99%. READ THIS NOW

Just a heads up for my fellow Mac users.
"How do I defrag my mac?"
"You don't need to, ever. It does it automatically."
"But it's running really slowly..."
"Repair permissions or something. Defragging is not necessary on a mac."
Techtool pro is now defragmenting my mac. Looks like the job's going to take about 4 hours. I thought I'd give everyone the truth about this while waiting (on a different computer obviously)
The truth is, Apple's defragmenting system ***** BALLS. It has two massive, massive flaws which I feel people urgently need to be made aware of.
#1: It only defragments files up to 20mb. If you're a movie producer, a songwriter, a photographer, or anything which involves working with many massive files, the built in defragmenting program WILL NOT HELP YOU IN THE SLIGHTEST.
#2: It only defragments FILES. Free space is ignored, which eventually causes absolutely hrrendous problems.
Let me give you an analogy here. Imagine your mac's hard drive is a bookcase with lots of books on it.
File fragmentation is when it can't find a gap in the bookcase big enough for the entire book, so it breaks the book into pieces and srotes them in different gaps.
Space fragmentation is when there are gaps all over the bookcase, instead of all the books being pushed to one side so there's a long gap elsewhere.
Apple's built in defragmenting program will only fix the first problem - and even then, it will ignore any book bigger than 20 pages long, if you have bigger books which are broken up, you're screwed.
Why is space fragmentation a problem? It's a problem because it directly LEADS TO file fragmentation. If there is a large block of free space all in one part of the disk, then an entire file can be written to it. However, if there is no single free block big enough for the file, it HAS NO CHOICE but to fragment it.
So basically you might have 5 GB free and want to save a 2GB imovie project. That's cool. But what you may not realize is, the biggest single area of free space is only say 600MB. Others are around 300 and 400. Therefore the file MUST be fragmented into all these different areas, which wouldn't be necessary if all the free space was in one area of the disk.
But apple's built in tools don't do anything about this, at least not in Tiger. PErhaps this has been fixed in later installations but I'm almost certain the same issues exist in leopard.
Your only option is to buy a defragmenting program. I know this ***** but believe me, this IS something you NEED to do if your activity on your laptop involves disk space - intensive projects. I'm using TechTool Pro which has been recommended to me as hands down the best. It has a number of other functions as well, right now I'm only using the defragmenting tools but it has others for repairing damages disk sectors and other mantainence tools. There are other programs such as iDefrag out there as well.
Why am I telling you this? I'm telling you because I experienced mind numbing frustration trying to get answers from the Apple community. Google it or ask the question yourself and you will most likely be whacked in the face with the intro to my post here - "You don't need to, it's not necessary, macs do it themselves, blah blah blah"
Even worse, Apple's own webpage on the subject is nothing short of a disaster. It basically says "You PROBABLY don't need to defragment, unless you work with large files." That's it. You'd expect it to have an extra section saying "If you DO happen to work with large files, here's what you do" but no such section exists. It basically says "You don't need to defrag most of the time, and on the rare occasions when you do, well, too bad, you're screwed."
I urge everyone to heed this or they will be tearing their hair out at how slow their mac has become and the fact that no one will offer any meaningful advice other than the standard, generic, "Repair permissions" - the Mac equivelant of "have you tried turning it off and on again".
My disk is at 99% fragmented free space. NINTEY NINE PERCENT. In other words, although I have 25GB of free space, there was not a single contiguous block on the entire machine. I had almost 5,000 fragmented files as well, mostly imovies. Defragmenting got this down to about 300.
The defrag job is taking more than 4 hours and will probably go on to take a lot longer than that. This machine has been slowly grinding to a halt over the last 3 years and now I know why.
Please don't listen to anyone. Get yourself a defragmenting folder, and email Apple to tell them it's just not good enough to give their customers half assed answers and inadequate basic maintainence tools. Mac OS X must literally be the only operating system out there where something as basic as defragmenting is not only almost impossible to get answers on, but actually costs money to fix once you DO get answers.
As customers, we should not accept this any longer. I intend to spread the above message far and wide.
I LOVE Apple. I've always been "a mac" and I always will be. This in no way a mac bashing post or a windows endorsing one. I wouldn't switch back to windows if you gave me a million euro.
But sometimes even the best developers can royally f*ck up. This is one of them.
There is no readon people should be forced to put up with this crap. Absolutely no reason at all. I've had 3 months of crappy performance with no official explanation whatsoever.
Apple if you're reading this: I love your products. I'm a loyal customer. People are more forgiving than you think, speak up, admit you dropped the ball, and DO something about it in your next updates to Lion and whichever versions of Leopard you are still actively maintaining.
There's no shame in admitting when you're wrong. The shame is in hiding behind false promises and walls of silence.
--Loyal customer, but feeling rather betrayed by all this.

The old rule of thumb was to keep 10-12 GB free. Any lower than that and you will start to have trouble. I was very close to that for a long time and never had any complaints. Now, Lion "encourages" 20% free space (on my newer 250 GB drive) so I try to keep it with more than 50 GB free.
Do you still have the original memory in that machine too? The metal plate you have to remove in the battery compartment also provides access to the RAM. Your machine will take 2 GB of RAM, possibly 3. You definitely want to max that out too.
Regardless, you definitely need a new hard drive. When Apple switched to PC components, they had to take a quality hit. These 2.5" notebook hard drives are not very reliable. I'm surprised your hard drive hasn't died by now. I usually get a new hard drive with every major OS upgrade. A $ 50 investment every couple of years is no big deal.
Unfortunately, you (and I) suffer from being an early adopter in 2006. Those 32-bit machines only accept 2 GB RAM (maybe 3) and are only 32-bit so they can't be upgraded to Lion. Because of this limitation, you won't see as dramatic an improvement as you would with a 2007 machine. If you run more than a couple of applications, your hard drive is always going to have to be doing some VM work. My 2006 machine has even lost its bluetooth. I gave it to my brother. My very similar 2007 Macbook is still running great.
So, you must get a new hard drive because your old one is likely on death's door. If you don't have at least 2 GB - get it. If you can't afford a new machine, you might want to consider an SSD. That might help mitigate your RAM limitations. You can spend from $ 100 to $ 350 and get a dramatic speed improvement.

Trouble shooting guide! Read this first!!!! rev 13-1-2004

(Revision 13-1-2004)
Hi there,
Follow everything on the list, even if it doesn't look like it would solve your problem, most problems are created somewhere else!
To give some examples:
CPU won't run FSB133....mostly powersupply or CPU-cooler.
Videocard won't load drivers....mostly powersupply.
Sound won't work.....mostly metal-standoff's.
Windows won't install, file read error.....mostly CPU-cooler, Bad-ram or powersupply.
That is why you need to go over the entire list and check all!
Before you start doing anything, remove the power and make sure that you have touched the metal case of your system. If you don't you could damage your system due to static discharge!
Thanks to Arioch and Dragon60 for comments on this.
There are several reasons why this happens.....to name the most commen:
CPU speeds
You have a Duron, that CPU is 100FSB!
You have a Athlon(XP) and it's showing the wrong speed, set the CPU-FSB to 133....
Or 166 when it's a FSB333 CPU....or 200 when it's a FSB400 CPU....
Some boards have a jumper to set it, other do it in the BIOS.
Check your manual for this.
Speeds must be:
Duron upto 1300MHz = 100MHz (=200DDR)
Duron from 1400MHz = 133MHz (=266DDR)
Athlon B type = 100MHz (=200DDR)
Athlon C type = 133MHz (=266DDR)
Athlon XP - C type = 133MHz (=266DDR)
Athlon XP - D type = 166MHz (=333DDR)
Athlon XP - E type = 200MHz (=400DDR)
Use this link to see if your motherboard actually supports your CPU.
The TBred CPU's (0.13) start from XP-1700 and up, but not all boards support this CPU and they either show on the D-LED all red or don't start at all!!
The K7T266pro2 is an exception, it can be made to support the TBred CPU's, on this link you find all the info on how to make it work.
Many reports have told us that FSB333 CPU's work on KT3-Ultra boards work just fine, but it's unsupported by MSI, we don't know why....
As for mulipliers with AMD CPU's, just set them Automatic, as they are hardcoded on the CPU themselves and will allway's be correctly, even if if you think the BIOS doesn't know it.
How to recognise the CPU:
If you look on the dice, there are letters after the speed.
The last letter will tell you the FSB of the CPU.
B=100MHz (=200DDR)
C=133MHz (=266DDR)
D=166MHz (=333DDR)
E=200MHz (=400DDR)
To recognise a CPU quickly, checkout this link.
Thanks Mellops.
The MHz setting must match your setting in the BIOS for FSB value, as it translates to the correct FSB setting for the CPU.
The best way to identify a processor is by using the OPN (Ordering Part Number) which can be found on the processor (E.g. AXDA 2700 D K V 3 D).
Detailed information on the code can be found in this AMD document. (Thanks Hans)
CPU Cooling
CPU cooler not made for your CPU, check if it can handle your CPU....
CPU cooler mounted wrong!, take it off and check it as it will fit 2 way's, but only 1 is the right one, examine very carefull!
The cooler has a lower part that needs to go over the bump (higher part) of the socket, if it's not over there it won't cool the entire dice and WILL give you trouble.
Also check if it's making contact with the entire dice of the CPU...
Make sure you regrease it again, the same grease/paste can't be used twice!
YOU MAY NEVER USE A THERMALPAD OR GREASE AGAIN! APPLY NEW EVERY TIME YOU TAKE THE COOLER OFF!!
top 2 show how not to do it
Used too much silver-grease! It will shorten the bridges on the CPU, clean it and use white-paste.
(Silver-paste is not recommended in any case!)
The latest AMD XP CPU's (XP-2200 and above) require a copperbased heatsink because the dice is smaller and generates far more heat per square cm then the "old" CPU's do.
How to check the cooler before taking it off.
There is a simple way to check the cooler without taking it off.
You do this by first checking your idle temp with PCAlert, it should be below 50-55C.
Then you download a client from www.distributed.net, let this client run for about 10 minutes while monitoring the temps, after about 1 minute or so it should stabilize and your temp should have gone up about 10-15C (max).
If it still goes up or the system crashes, there is a big chance you mounted the CPU-cooler wrong.
When you can't run this check, try with FSB100, if the system does run the check then, it could be well that the cooler is mounted wrong or your powersupply doesn't have enough power.
***** YOU CAN'T CHECK THE CPU COOLER ON TEMPS OR FAN RUNNING, IT MUST BE TAKEN OFF THE CPU!!! *****
Cleaning the CPU and Cooler - thanks to Dragon60 for his addition.
An additional comments about this is what you clean the CPU with in this situation. The best thing to use is isopropyl alcohol. If this is not available then metholated spirits would do.
Make sure you allow the CPU to dry properly before you put it back in. This also means DO NOT try and clean it whilst it is still in the socket as some of the cleaning fluid, grease and dirt may get underneath and short some pins.
Last but not least. DO NOT use acetone to clean anything inside your PC. (or outside for that matter) It MAY not do any damage BUT it may disolve some parts.
Thanks Dragon60.
If you don't understand what we are talking about on this cooler matter, then read this link: AMD CPU & Cooling guide
Powersupplies
Powersupply too little, most commen cheap 300W CPU's can't handle an XP-1700 or above, try a better one to be sure.
Make sure your powersupply has about 185W combined on the 3.3+5V and that the 3.3V has 20A or above.
That should be enough for most systems.
On the latest boards the 12V has become very important too, expecialy with TBred CPU's.
Make sure yours can give 18A or more on the 12V line too.
I have found that a lot of cheap 350W will fail with modern boards and TBred CPU's.
Allway's make sure you have a decend PSU, it never fails to spent a bit more on that part!
Borrow a bigger one from a friend if you are not sure....
More info about powersupplies: Click here.
And the second you must read: Click here.
Powersupplies with these type of numbers on them or higher should be fine:
3.3V - 28A or better
5V - 30A or better
12V - 18A or better
Watch out!! Cheap PSU's like Q-Tec come nowhere near these figures!!
Do NOT trust the 300W or 400W rating on them!!!
Q-Tec is about the worst of them all!!
Metalclips
Stand-off's left between the board and the case, take the board out and check for too many of those metal-clips, they can shorten circuits and cause al sorts of problems (most of the time audio problems)
RAM
Ram problems, don't try to run with PC100 (SDram boards) when you have a 133FSB CPU, get PC133 ram of decend quality.
In any case, don't use cheap quality ram (Crucial seems decend, but give's a lot of problems, I consider these cheap quality too :P ), replace the ram with another brand to see if it fixes it....
DDR ram speeds:
Duron upto 1300/Athlon-B =100FSB=PC-1600=DDR200
Duron from 1400 =133FSB=PC-2100=DDR266
Athlon-C/XP upto 2600 =133FSB=PC-2100=DDR266
Athlon XP D-type and above =166FSB=PC-2700=DDR333
Athlon XP E-type and above =200FSB=PC-3200=DDR400
Higher DDR speeds are only a must if you try to overclock, they have no speed gain if run at the correct speed. You may use faster ram on a slower system, the speeds given are what is needed minimum.
Perform RAM test tools, ie http://www.memtest.org if you suspect RAM is faulty, such as BSOD or data corruption. [added by Maesus]
Try your system allway's with 1 stick of ram, adding more sticks can give all the trouble too.
Some sticks just won't work in pair and a lot fail when you put 3 or more in the system.
When you want to use 3 sticks, make very sure you use the MSI tested ones, they are your best chance that they work without problems.
If still nothing, try to seat the ram in another slot, sometimes they work better in another slot.
Thanks boost
Or rise the Ram voltage a little, be carefull doing this!
Sometimes this works when you have a lot of ram in there.
BIOS
BIOS settings not right, clear the CMos and start with the default settings, if it works, try setting ONLY the FSB to 133 if needed, nothing more.....
And go further from there......
Clearing CMos
When you clear the CMos, make sure that all power is cut from the system.
This is done by takeing the wall-plug out or use the switch on the powersupply to turn it off.
On most boards, as far as I know all MSI boards, you must set the JBat1 to position 2-3 (clear position) for about 10 seconds, then set it back to 1-2 (keep data position)
After this your CMos should be cleared and you can turn the system back on.
In some rare cases it's needed to take the battery out too for a minute or so.
It can happen that the system will prompt you to set the BIOS again, go into the BIOS and set everything you need, then save the settings.
Thanks fguevara.
Harddisks
Harddisk is giving problems, most of the time with WD drive's, they are jumpered somewhat strange compared to others:
No jumper = Stand-Alone no other drive attached to the cable.
Jumper master = if you have a slave drive attached
Jumper slave = when it's slave to another drive
Harddisk is doing weird things:
Make sure you have connected the blue connector to the board, and don't let the other end of the cable unused, make sure there is a device connected to it.
The middle connector can be left into the air without problems if not needed.
IBM harddisks seem to fail a lot, try Drive-Fitness-Test on it, see if it has problems.
Click here for DFT
Other brand drives can have problems too, make sure they are ok, as harddisk failure can cause all sorts of problems.
Allway's be sure your harddisk is in tip-top shape, if not, replace it and try another to verify.
For more information read this: Click here.
To know what harddisks your motherboard support, use this link.
To enable harddisk over 137GB in Win2000 edit this registry key:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atapi\Parameters]
"EnableBigLba"=dword:00000001
The KT4 raid boards only support 1 harddisk on IDE3, the rest must be SATA drive's!!
Harddisk/power led not functioning - thanks to Tweetyoost
If your HD led or power led not work try to switch(wrong + or - side) the connectors on the motherboard.
leds will work only when + or - is correct
Thanks Tweetyoost.
Floppy drive's
If your floppy drive doesn't work or the led stay's on all the time.
Make sure the floppy is set correctly in the BIOS, as the BIOS doesn't autodetect a floppy drive.
Check the cable, make sure the twist in the cable is at the floppy-drive side.
If the light stay's on, flip the connector at the floppy-drive arround.
Sometimes it happens that even after all this, they still don't work, try with another drive from another brand.
Not able to enter the BIOS or lockup
When you try to enter the BIOS it won't go in there or
lockup, but your system is running fine.
This symtom can happen when your CPU-Cooler is giving spikes on the coolerwire.
Try with another brand of cooler to test if it solves it.
Keyboard and optical mouse lights stay on after power off[/U]
Some motherboards have a jumper called JKBV1, this jumper is located (mostly) near the keyboard connector, put it in the other position.
If your board doesn't have the jumper, try to find the following BIOS settings and turn them off:
resume on KBC
resume on PS/2
resume by alarm
USB ports not working[/U]
Check in the BIOS if the ports are enabled.
USB2.0 ports are supported in Win2000+SP3 and XP+SP1, just let the OS reinstall the ports and they should work.
Thanks Stygge
Replacing parts and the system won't boot after
It's never a good idea to replace stuff like CPU and ram without taking the board out of the case.
But if you still like to do so, please support the board, because if you don't you might bent the board a little and cause other components to make bad contact.
Allways support the board when you replace stuff, no matter what!
Also make sure your system can take the replacement, it could happen for example that your powersupply can't handle your changed videocard from GF2MX to GF4Ti4600.
Test all the parts in another system
Make sure that the new part is in good working order in the first place (in particular: videocard, CPU, memory): try it in another system, or have it demonstrated by the one you bought it from if possible.
Testing might also give you a clue on what is actually wrong in your own system.
Thanks HansH.
Checking the powersupply
Don't do this if you don't know what you are doing!
Disconnect the powersupply.
Orientate the 20pin Powerconnector with the clip up.
Locate pin 4 and pin 8 top row, mostly green and black wire.
Use a wire to short them (or better a 12V test lamp).
Now connect the power and the fan inside the powersupply should start spinning.
If it doesn't your powersupply maybe dead.
Thanks HansH.
KT4 users
Please read the Un-Official KT4 guide if you have CRC errors or strange crashes.
These can be BIOS problems.
In any case !!!Only flash if the system is stable!!!
Set default-settings and FSB100 to make it stable first!!!
Motherboards making a Siren-sound
If your board is making the sound of a firetruck, BEEP-BOOP-BEEP-BOOP...
Check the folowing:
1. CPU too hot
2. chassis intrusion was enabled in the BIOS
3. PSU is below min/max allowable value
Stutter in audio
Remove your antivirus software.
We have heard a few cases where the stuttering was created by badly behaving antivirus software.
Disable cpu halt command if it's in the BIOS (Thanks Pascal16)
Windows
Windows2000/XP won't run stable, try to disable APIC and install again....
Not all drivers/devices like the APIC.
Windows2000/XP won't install USB2.0, install the latest servicepak (SP3 Win2000 or SP1 WinXP).
Let Windows rediscover the USB ports, they should work now.
If you have driver or other problems and don't know what to do anymore but Windows does function without crashing, read this: Click here.
Audio [added by Maesus, 20/2/2003]
Can't stream AC3 via SPDIF to external DD decoder? try this ac3filter [info provided by Manfred ]
Lan not working 100MBit
You could try this patch, seems to work on some boards.
The download-link is at the bottom of this post.
I think I have about covered all most commen problems....
Check those first before you ask us, as it's not fun to type the same over and over again.... :(
Another good link for trouble shooting is here: Link
If you have more issues that can solve problems, please write your thing below......
I will insert your comments in this guide, with credits, offcourse 8)
!!I will delete any attempt for discussion or problem report below this message.....!!
Please report back, in another thread, if your problem was solved and how you did it, this will help others a great deal.
It's only ment to help people as a guide to where the problem can be, start a new thread if this guide didn't solve your problem and you need more help!
This thread is only for the experts to guide you into a solution :]

Dude thank-you for your wonder detailed knowldge, I have descovered that lets say xp 1700 in a ultra 2 can only handle at the most 143fsb mult at 12.
Given the settings" irq's are a major",part of directing traffic and power? example:
Sound blaster Live , uses two irq's most common at"Auto" is, irq 10, or 5, and Sound blaster 16 emulation usually takes irq 5,. I have found that the sound card in slot3 works great , but to do this I had to change the Bio's and assign slot 3 irq 7 . and make sure printer port has share irq enabled
Problems that accure with bad traffic are like this. Start a dedicated server. minimize than start your game?":censored: no sound what could be wrong"? Shoot another problem Connection problem?. The computer nerd is getting trouble over the ordeal. ANSWER! IRQ can fix the problem, Study the irq and make changes as you go. "what would it be like with no stop signs,,,that is the same as a irq. with the same knowldge this topic brings IRQ need to be clearly understood.
I can honestly say my system is error free and running like a dream.
xp 2500 barton 333
creative sound 5.1gamers.
512 mb kingston ram 400 mhz
boadband either onboard.
MSI 5700 128 mb ddr
Setting are:
163 fsb
mult of 11
ddr 333
video memory clock down to 450mhz
3d clock to 390mhz
The delta is a smooth running board also I want to mention to the person with crackling sounds, change the irq like I did, that fix the problem and the power is totaly too good to be true.

Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I have re-installed, SO many times and I still cant open iTunes.

Hi Support,
I am becoming anxious because no matter what I try it doesnt seem to allow me to open itunes.
Error Message reads: this application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem.
I have re-installed, SO many times and I still cant open iTunes.
Please help!!

Click here and follow the instructions.
(98888)

APPLE/DEVS Read this! Windows 7 CAN'T detect the iPhone 5s but iTunes CAN detect it! WEIRD, huh?!..

just a summary...
i have a iphone 3G which i have been using for a long time and now i got an iphone 5s.. troubleshooting this kind of stuff is not new to me from computers to smartphones.. the internet has a vast majority of information and all you need to do is type in the right "KEYWORD".. i'm that kind of guy that looks for the answer before i try to look on it on my own.. i'm a DIY kind of guy as long as there is an instruction on how to do it..
now, back to the topic..
so i was trying to copy some of my pictures on my iphone 5s to my PC for backup purposes and to see the quality of the images but the portable device doesn't show up unlike my iphone 3G which is f***ing WEIRD.. been tinkering with this over the past 5 days since i have nothing to do and testing the new features of this phone but to no avail.. searched all over the internet but still none..
so last night, i was really determined since i can't sleep and also connected my iphone 3G to my PC while the iphone 5s is connected.. so here is what shows up on my devices and printers and device manager..
i can totally see the pics on my iphone 3G but not on my iphone 5s.. totally amazing.. good job apple!
the picture under devices shows my iphone 3G and the other 2 on unspecified is my iphone 5s.. the iPhone under there is being used as my source of internet since this is tethered so i can have access and post this in here so that APPLE will know how f***ed up their SOFTWARE is is..
so i downloaded itunes a couple of times, and i can't remember how many already, i think 5 times or more and then uninstalled all apple softwares (itunes, apple application support, apple mobile device support and etc as long as there is apple in it) and then reinstalled itunes but still none..
so i went on device manager removed my iphone 3G and the only one that would show there is the Apple Mobile Device USB driver under USB controllers..
and then i uninstalled the driver, looked for the driver myself by just it doesn't show up in here where you are directed to look for the driver and oh im using 64 bit just so everyone knows and i already found out that my system is using the usbaapl64.sys file in windows>system32>drivers..
so last night i installed, reinstalled itunes and then suddenly my drive D: was gone and i received an error or a "!" on my drive and my drive is not being detected.
Error: windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damage. (code 19).
i unstalled the driver in device manager and then scan hardware changes, updated the driver automatically and manually and it is saying that i have the latest hardware but i can't use my DVD drive with the error on it..
so today i searched for that e-fing error and found this http://pcsupport.about.com/od/findbyerrormessage/a/code-19-error.htm
"4. Uninstall Apple iTunes. While that may sound a little drastic, iTunes is the cause of enough Code 19 errors to make it into this troubleshooting.
If removing iTunes works, you might try installing it again from scratch, which doesn't always reintroduce the problem. See How to Properly Reinstall a Software Program for general advice."
so i then uninstalled my itunes, uninstalled my driver and then updated it and "walla!". i can see my DVD drive again. i am using iTunes64Setup v12.0.1.26 just so everyone knows and this setup can detect both my iphones and my iphone 5s is using the latest version which is iOS 8.1.2..
after reinstallation of itunes my DVD drive can be seen and just noticed how APPLE SOFTWARES are so ****** up.. CAUSING A LOT OF TROUBLE AND DAMAGES..
so going back to the topic..
i was able to find a way (AFTER HOW MANY HOURS of TROUBLESHOOTING) on how my iphone 5s was able to detect the portable device or should i say the images on my iphone 5s where the autoplay pops up and everything..
so i went on device manager, uninstalled apple mobile device USB driver, disconnected my iphone 5s, UNLOCKED my iphone 5s, connected it to my PC, clicked on TRUST this PC, on my PC the sound for a USB being connected sounded, and at the bottom right, automatically installed the drivers and then the autoplay popped up with the matching PORTABLE DEVICES on COMPUTER where i can browse the internal storage and the pictures..
so now i opened iTunes and BOOOM!
iTunes doesn't detect my iphone 5s but i can browse on the images on my phone..
so again i went to device manager, uninstalled the driver for apple iphone under portable devices, scanned for hardware changes, updated the driver manually by selecting drive C: so it would automatically find the correct drive..
so now, my iphone can be detected by itunes but not on my COMPUTER.. see how ****** UP this is?!.. JEEEEEEEEEZ!!
Now i finally found the SOLUTION on how to do this and vice versa.. UNTIL APPLE decides to FIX their SOFTWARE/DRIVER issues..
if you want to scan or browse the images on your iphone 5s on your computer all you need to do is do this:
[for those who don't know how to reach this part, here is a GUIDE on how to open this is: click on the device > click on update driver software > browse my computer for driver software > let me pick from a list of device drivers on my computer]
and then you will see the screen below
click on MTP USB Device and then click on Next, after it finishes installing the drivers, your PC will automatically detect a new portable device but in order for you to access the images you need to go back on your phone, unlock it if it lock automatically and then click on "TRUST" and then you can now see the images..
BUT the problem here is that your iPhone can't be detected on iTunes...
now, if you want to go back to where your phone can be detected on itunes, just follow these steps:
click on apple mobile device USB driver, click on Next and then wait for your computer to finish the installation and then you will hear the beeping sound. check your phone, unlock it, then click on "TRUST", and then go to iTunes and you will now see your iPhone there but not on your PC where you can browse for the images..
SEE HOW THIS DRIVERS are so ****** up.. i wish i hadn't started using this ****** UP OS with all the BUGS and GLITCHES.. JEEEZ! and to think, these DEVICES are not CHEAP compared to Android devices on the market.. it's just because of how these people go with the trend that they purchase these kind of stuff and the only thing they use it for is calling or texting.. i, for once use this not for calling or texting but also for the apps that it has like the games, ebooks and etc when im bored..
i HOPE the Apple DEVS read this and find the solution on the drivers which is so ****** UP and so LAME!!
PS: i hope a lot of people who are having the same issue as what i had find this and help them with their concern even though this is not a permanent solution.. it is just a work around for folks that are looking for answers and solution.
Have a Great Day Folks and it is the start of a New Year and want to contribute something even though i don't usually posts my work around.

Hi LSGZ,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Regards,
- Brenden

There was an error processing a page. there was a problem reading this document (110)?

hi
my name is kapil and i am trying to open one (which is downloded) pdf document.which giving me an error as there was an error processing a page. there was a problem reading this document (110) for some page only. i am using acrobat reader x. is it any 3d setting or any thing else please give me an idea. i am waiting for replay as soon as possible...........
your sincerely
KAPIL TRIVEDI

When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice.

There was a problem reading this document (117)

Dear Designers
I am facing a strange problem while doing test presentment in Adobe output designer. When i do a test presentment with my dat file which is meant for fax (^job newFax -fform01F.MDF) , i see the pdf (consist of 2 pages ) but as soon as i scroll down to next page (Pg 2) of my pdf ; it giving me a Adobe reader error pop up "There was a problem reading this document (117)" and when i click OK and comes to page 2 (i'm seeing the content of Pg2 curerntly) and scroll back to page 1 the data on page 2 goes blank. What could be the possible reason for this ? I assume the flaw is on Adobe reader side , but please brighten me with the knowledge if there is some issue on dat file side.
Any possible guidance or help would be highly appreciated
thanks
jaY

Sorry, I do not quite understand what your problem is:
you have a problem with signing in to the ExportPDF service ?
you have a problem opening PDF files ? If so, are these local or online documents?
P.S. Reader XI and earlier will no longer support Document Cloud PDF services as of May 20; see https://forums.adobe.com/docs/DOC-5891

THE FAMOUS ERROR: There was a problem reading this document (15) - Thanks Adobe Engineering team

As a result of this error, I cannot delete pages in a big PDF file I have of 1032 pages.
The error, famous on the web and in Google, is:
there was a problem reading this document (15)
I hope I can find a solution for this, because I cannot delete the unnecessary pages inside the document which is driving me crazy.
Adobe Acrobat X has a very poor quality testing. In fact I don't beleive Adobe test their products, I think they just program them, label them as the finished product, ASK FOR A HIGH PRICE, OF COURSE, and release them to the market creating a lot of nightmares and headaches to the customer.
Adobe Acrobat X crashed several times when the files have flash content inside or formularies. The program, simply, is bad programmed with a very poor engineering inside.
As soon I find an alternative for PDF, I will switch, I promise, in fact I don't promise it, I SWEAR IT.
And if I dont find a solution for this I will put in my car a banner that says "DON'T BUY ADOBE ACROBAT, IS THE WORST PROGRAM YOU CAN FIND!"
I'm loosing days and days of work, this is costing me problems and money.

Yes, there is something wrong with the document. That is the defective programming the Adobe engineering team did. And please, allow me to explain you why it is defective. After you spend millions dollars in 950 engineers and 3100 beta testers, you can destroy Adobe Acrobat X easily just downloading a website rich in flash content. Some animated banners in the downloaded pages from the web, it's enough to destroy it.
Just go to a website where you have animated banners, and press Shift+Crtl+O to download the pages...
Save your PDF document and then try to work with it.
If the document has a big size, let's say 1000 pages approximately, and many of them have flash content... Adobe Acrobat X crash automatically just moving from one page to another.
As simple as that.
Is the most unstable program I've seen in all my life. And please, don't tell me it's my machine, because I've tested it in other computers. The same!
But there is more! yes
Forms fields also destroy Acrobat X
In a big PDF file having several pages inside with forms, just go to Tools, Forms and Edit, then in the list of pages try to delete the forms fields selecting them and pressing the Del key... crasshhhh Acrobat X die.
What kind of betatesters you chose to test your products? For sure are people that are working with light documents of 5... 10 pages and no more.
For sure are not people working extensively with Adobe Acrobat, as I do.
And what happens when Acrobat X crash miserably time after time? that the Error 15 comes, because the file becomes corrupted.
This is not serious.
Is this the kind of performance and stability that Acrobat provide to the customers? having the risk to lose important documents and data, due how unstable is the program?
You can tell me you hired NASA personnel to do this program, but customers need results, and crashing the program just pressing one key is not serious.
And talking about complains I don't want to remember the last update of the Acrobat 9 !!!
And you know what? a simple tool as NitroPDF don't crash!
Sadly NitroPDF is not an option for me, because I embed videos in the PDF documents and NitroPDF don't allow me that.
I am using Adobe Acrobat X because sadly I don't find another alternative, the day I find it, I'll switch for sure.
Or perhaps we can get a miracle, and your programmers could focus in what is IMPORTANT: STABILITY AND PERFORMANCE.

Error message: There was an error processing a page. There was a problem reading this document (110)

I opened a pdf document in Adobe Reader X. When I attempted to scroll through the pages the following error message appeared, “There was an error processing a page. There was a problem reading the document (110). After an Internet search to try to find the reason for the error and a solution, I came across a site that suggested it was an issue regarding the fonts of the document. I then reopened the document and went into the document’s font properties (FILE – PROPERTIES – FONTS tab). There I noticed that the “Gathering font information” stopped at 2% which, of course, I took to mean that Adobe Reader X was having a difficult time in loading the font’s information. Another site suggested opening the document in the pdf reader, Foxit. So I did, and the document loaded properly with no error messages. I was still curious as to why the document did not load entirely in Adobe Reader X and if the same problem would occur using a different reader. I then downloaded the pdf reader, Nitro Reader 2. I opened the same document and initially received the following message, “The requested page number is invalid and does not exist in this document.” I closed the message and proceeded to scroll through the document. As I scrolled, the following message appeared, “This file was damaged (corrupted) and has been repaired.” I thought, “Wonderful!” I then chose <FILE – SAVE AS – PDF DOCUMENT> and saved the “repaired” document under a new name. When I opened the “repaired” document with Adobe Reader X, behold, the document opened entirely with no error message. I was curious, so I went into the document’s font properties and noticed, this time around, that the “Gathering font information” loaded to 100%. Nitro Reader 2 detected the error and fixed it. Now I’m left to wonder…why wasn’t Adobe Reader X able to do the same? I hope this post helps others who are experiencing the same issue.

When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice.

When i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th

when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]

thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode

Can anyone read this Apple crash report?

Hi everyone!
My iMac's been absolutely fine since I bought it. The Lion upgrade was smooth. I upgraded on the first day Lion became available.
In the past week, I keep getting every other day a progressive gray screen and a warning that the computer needs to restart. I've no idea what's causing the crash... it happens when I have the standard suite of apps running (Mail, iTunes, Safari, etc) so no exotic application.
Here's a crash report. Can anyone read this and pin point the problem?
Thanks!
Interval Since Last Panic Report: 26855 sec
Panics Since Last Report:          1
Anonymous UUID:                    2A90D08F-7981-4C26-90A0-88431085705A
Thu Jan 19 21:02:56 2012
panic(cpu 1 caller 0xffffff8000570f80): "MCHECK: m_type=12350 m=0xffffff807b9b6500"@/SourceCache/xnu/xnu-1699.24.8/bsd/kern/uipc_mbuf.c:3129
Backtrace (CPU 1), Frame : Return Address
0xffffff808045bad0 : 0xffffff8000220702
0xffffff808045bb50 : 0xffffff8000570f80
0xffffff808045bb80 : 0xffffff8000572c77
0xffffff808045bc10 : 0xffffff80005731d6
0xffffff808045bc30 : 0xffffff8000358c25
0xffffff808045bd10 : 0xffffff8000353729
0xffffff808045bd50 : 0xffffff8000580644
0xffffff808045be40 : 0xffffff8000563973
0xffffff808045be70 : 0xffffff80005614bf
0xffffff808045bf00 : 0xffffff8000561612
0xffffff808045bf50 : 0xffffff80005caa9b
0xffffff808045bfb0 : 0xffffff80002d8363
BSD process name corresponding to current thread: IMServicePlugInA
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 7371663855074
last loaded kext at 7163667149728: com.trusteer.driver.gakl_driver_2          1 (addr 0xffffff7f8079d000, size 28672)
last unloaded kext at 7058117348300: com.apple.driver.AppleUSBCDC          4.1.15 (addr 0xffffff7f80799000, size 12288)
loaded kexts:
com.trusteer.driver.gakl_driver_2          1
com.kaspersky.kext.kimul.38          38
com.parallels.kext.prl_vnic          6.0 12106.692267
com.parallels.kext.prl_netbridge          6.0 12106.692267
com.parallels.kext.prl_hid_hook          6.0 12106.692267
com.parallels.kext.prl_hypervisor          6.0 12106.692267
com.parallels.kext.prl_usb_connect          6.0 12106.692267
com.kaspersky.kext.klif          2.2.0d14
com.apple.driver.AppleHWSensor          1.9.4d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleBluetoothMultitouch          66.3
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.1.3f7
com.apple.driver.AGPM          100.12.42
com.apple.driver.AppleMikeyDriver          2.1.3f7
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.kext.ATIFramebuffer          7.1.4
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.1
com.apple.driver.AirPort.Atheros40          501.58.1
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.5d4
com.apple.driver.AppleLPC          1.5.3
com.apple.driver.AppleBacklight          170.1.9
com.apple.ATIRadeonX3000          7.1.4
com.apple.driver.AppleIntelHD3000Graphics          7.1.4
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.driver.AppleIRController          312
com.apple.driver.AppleUSBCardReader          3.0.1
com.apple.iokit.SCSITaskUserClient          3.0.1
com.apple.driver.Oxford_Semi          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.iokit.IOAHCIBlockStorage          2.0.1
com.apple.driver.AppleUSBHub          4.5.0
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.iokit.AppleBCM5701Ethernet          3.0.8b2
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleAHCIPort          2.2.0
com.apple.driver.AppleUSBEHCI          4.5.5
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          167.1.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1
com.apple.driver.AppleIntelCPUPowerManagement          167.1.0
com.apple.driver.AppleBluetoothHIDKeyboard          152.3
com.apple.driver.AppleHIDKeyboard          152.3
com.apple.kext.triggers          1.0
com.apple.driver.AppleMultitouchDriver          220.62.1
com.apple.driver.IOBluetoothHIDDriver          4.0.1f4
com.apple.driver.AppleAVBAudio          1.0.0d11
com.apple.driver.DspFuncLib          2.1.3f7
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOSurface          80.0
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.iokit.IOBluetoothSerialManager          4.0.1f4
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAVBFamily          1.0.0d22
com.apple.iokit.IOAudioFamily          1.8.3fc11
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          2.1.3f7
com.apple.iokit.IOHDAFamily          2.1.3f7
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.iokit.IO80211Family          411.1
com.apple.driver.IOPlatformPluginFamily          4.7.5d4
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.driver.AppleThunderboltEDMSink          1.1.3
com.apple.driver.AppleThunderboltEDMSource          1.1.3
com.apple.kext.ATI6000Controller          7.1.4
com.apple.kext.ATISupport          7.1.4
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.driver.AppleIntelSNBGraphicsFB          7.1.4
com.apple.driver.AppleSMC          3.1.1d8
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController          4.0.1f4
com.apple.iokit.IOBluetoothFamily          4.0.1f4
com.apple.driver.AppleThunderboltDPOutAdapter          1.5.8
com.apple.driver.AppleThunderboltDPInAdapter          1.5.8
com.apple.driver.AppleThunderboltDPAdapterFamily          1.5.8
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.1
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.iokit.IOAHCISerialATAPI          2.0.1
com.apple.iokit.IOUSBMassStorageClass          3.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport          2.1.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.1
com.apple.iokit.IOFireWireSBP2          4.2.0
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.driver.XsanFilter          403
com.apple.driver.AppleThunderboltNHI          1.3.2
com.apple.iokit.IOThunderboltFamily          1.7.4
com.apple.iokit.IOUSBUserClient          4.5.3
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IOEthernetAVBController          1.0.0d5
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOAHCIFamily          2.0.7
com.apple.iokit.IOUSBFamily          4.5.5
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          165.3
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.7
com.apple.iokit.IOACPIFamily          1.4
Unable to gather system configuration information.Model: iMac12,1, BootROM IM121.0047.B1D, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f21
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-402AA0, 500.11 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: iPhone, apple_vendor_id, 0x12a0, 0xfa130000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: 7600 Series, 0x043d (Lexmark International Inc.), 0x0150, 0xfd140000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
FireWire Device: eGo HDD, Iomega, 800mbit_speed

This crash reports says...
OS: 10.7.2
Processor: Intel 64-bit
Computer: iMac 10 generation, lowest-end model
Interval Since Last Panic Report: 26855 sec
Panics Since Last Report:          1
Anonymous UUID:                    2A90D08F-7981-4C26-90A0-88431085705A
Thu Jan 19 21:02:56 2012
panic(cpu 1 caller 0xffffff8000570f80): "MCHECK: m_type=12350 m=0xffffff807b9b6500"@/SourceCache/xnu/xnu-1699.24.8/bsd/kern/uipc_mbuf.c:3129
Backtrace (CPU 1), Frame : Return Address
0xffffff808045bad0 : 0xffffff8000220702
0xffffff808045bb50 : 0xffffff8000570f80
0xffffff808045bb80 : 0xffffff8000572c77
0xffffff808045bc10 : 0xffffff80005731d6
0xffffff808045bc30 : 0xffffff8000358c25
0xffffff808045bd10 : 0xffffff8000353729
0xffffff808045bd50 : 0xffffff8000580644
0xffffff808045be40 : 0xffffff8000563973
0xffffff808045be70 : 0xffffff80005614bf
0xffffff808045bf00 : 0xffffff8000561612
0xffffff808045bf50 : 0xffffff80005caa9b
0xffffff808045bfb0 : 0xffffff80002d8363
This is a kernel error. Did your screen give you this error? This is well know as the "Black Screen Of Death". Just restart your computer and see what happens.
Source of picture: http://en.wikipedia.org/wiki/File:Panic10.6.png

Xorg 7.0 upgraders read this

Similar Messages

Maybe you are looking for