Xorg configuration file

Is there anyone using an NVIDIA Geforce GTX 285M card? If so, could you please give me your xorg.conf file? I installed arch linux on my new laptop a week ago and for some reason haven't been able to get xorg to use the nvidia drivers. I am hoping that someone would have an xorg config file, for their GTX 285M card. I would be happy to try it out.. cos Im at my wits end trying to get it to work. All of last week, was just one big drag after another trying to find a solution. This is my last resort... I hate to think i might have to install crap vinduze..
Thank you.
PS: actually an xorg.conf file on a system with any of the newest nvidia cards might work I think.
thaks

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
The only line I added was "Option "NoLogo" "True"".
As you can see, my xorg is very bare and plain. Could that be the reason why Im not getting display? Are there supposed to be certain options that I have missed?
And is DPMS necessary?
Thats the xorg.conf file.
What follows is the log file that you had asked for.
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33-ARCH i686
Current Operating System: Linux TheRock 2.6.33-ARCH #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010 i686
Kernel command line: root=/dev/sdb1 ro
Build Date: 01 April 2010 05:35:33PM
Current version of pixman: 0.18.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 29 09:28:36 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:2:0:0) 10de:060f:1558:8687 nVidia Corporation rev 162, Mem @ 0xce000000/16777216, 0xd0000000/268435456, 0xcc000000/33554432, I/O @ 0x00002000/128
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(**) Logitech Optical USB Mouse: Device: "/dev/input/event11"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found scroll wheel(s)
(II) Logitech Optical USB Mouse: Found relative axes
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
(**) Logitech Optical USB Mouse: (accel) acceleration profile 0
(II) Logitech Optical USB Mouse: initialized for relative axes.
(II) config/hal: Adding input device BisonCam, NB Pro
(**) BisonCam, NB Pro: always reports core events
(**) BisonCam, NB Pro: Device: "/dev/input/event10"
(II) BisonCam, NB Pro: Found keys
(II) BisonCam, NB Pro: Configuring as keyboard
(II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event6"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
There are a few warnings regarding ACPI and "AllowEmptyInput". Could that be the problem?
Thank you very much.

Similar Messages

Xorg 1.8 : Does it work with Xorg -configure?

Hey everyone
Does Xorg 1.8 work with Xorg --configure or would one have to manually set the configuration files in /etc/X11/xorg.conf.d/? Also another question, if I am using xorg 1.8. do I still have to add HAL to the list of DAEMONS in /etc/rc.conf or would listeing DBUS only be sufficient to get a working X configuration?

Yes, `Xorg -configure` still works, and no, Xorg does not need HAL anymore.
D-Bus is only needed if you have applications that use it (e.g., desktop environment programs).
Last edited by Wintervenom (2010-08-03 02:46:04)

[solved] Xorg -configuration crashes (signal 11)

I've been trying to get Xorg to work all day without success. What I've been doing:
* Install archlinux from scratch
* Upgrade with pacman -Syu
* Install Xorg
* Install fglrx
* Run Xorg -configure.
This is when it crashes with the following output:
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux twarkie 2.6.22-ARCH #1 SMP PREEMPT Tue Sep 25 19:18:19 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 26 22:11:11 2007
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,00e1 card 0000,0000 rev a1 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 10de,00e0 card 10de,0c11 rev a2 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,00e4 card 10de,0c11 rev a1 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,00e7 card 10de,0c11 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,00e7 card 10de,0c11 rev a1 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,00e8 card 10de,0c11 rev a2 class 0c,03,20 hdr 80
(II) PCI: 00:05:0: chip 10de,00df card 10de,0c11 rev a2 class 06,80,00 hdr 00
(II) PCI: 00:08:0: chip 10de,00e5 card f0de,0c11 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:09:0: chip 10de,00ee card 10de,0c11 rev a2 class 01,01,85 hdr 00
(II) PCI: 00:0a:0: chip 10de,00e3 card 10de,0c11 rev a2 class 01,01,85 hdr 00
(II) PCI: 00:0b:0: chip 10de,00e2 card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,00ed card 0000,0000 rev a2 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 1002,4152 card 174b,7c29 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,4172 card 174b,7c28 rev 00 class 03,80,00 hdr 00
(II) PCI: 02:0b:0: chip 1412,1724 card 3031,4553 rev 01 class 04,01,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:11:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000b000 - 0x0000bfff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xe7ffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:14:0), (0,2,2), BCTRL: 0x0202 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 AR [Radeon 9600] rev 0, Mem @ 0xd8000000/27, 0xe8030000/16, I/O @ 0xb000/8
(--) PCI: (1:0:1) ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary) rev 0, Mem @ 0xe0000000/27, 0xe8020000/16
List of video drivers:
fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.40.4
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xea000000 - 0xea000fff (0x1000) MX[b]
[1] -1 0 0xea004000 - 0xea0040ff (0x100) MX[b]
[2] -1 0 0xea003000 - 0xea003fff (0x1000) MX[b]
[3] -1 0 0xea002000 - 0xea002fff (0x1000) MX[b]
[4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[5] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000c200 - 0x0000c27f (0x80) IX[b]
[8] -1 0 0x0000c100 - 0x0000c11f (0x20) IX[b]
[9] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b]
[10] -1 0 0x0000de00 - 0x0000de0f (0x10) IX[b]
[11] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[12] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[13] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[14] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[15] -1 0 0x0000d900 - 0x0000d97f (0x80) IX[b]
[16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[17] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[18] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[19] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[20] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[22] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[23] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[24] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[25] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[26] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX[b](B)
[1] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xea000000 - 0xea000fff (0x1000) MX[b]
[1] -1 0 0xea004000 - 0xea0040ff (0x100) MX[b]
[2] -1 0 0xea003000 - 0xea003fff (0x1000) MX[b]
[3] -1 0 0xea002000 - 0xea002fff (0x1000) MX[b]
[4] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[5] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX[b](B)
[6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[7] -1 0 0x0000c200 - 0x0000c27f (0x80) IX[b]
[8] -1 0 0x0000c100 - 0x0000c11f (0x20) IX[b]
[9] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b]
[10] -1 0 0x0000de00 - 0x0000de0f (0x10) IX[b]
[11] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[12] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[13] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[14] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[15] -1 0 0x0000d900 - 0x0000d97f (0x80) IX[b]
[16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[17] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[18] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[19] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[20] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[21] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[22] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[23] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[24] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[25] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[26] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX[b](B)
[1] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xea000000 - 0xea000fff (0x1000) MX[b]
[5] -1 0 0xea004000 - 0xea0040ff (0x100) MX[b]
[6] -1 0 0xea003000 - 0xea003fff (0x1000) MX[b]
[7] -1 0 0xea002000 - 0xea002fff (0x1000) MX[b]
[8] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[b]O
[9] -1 0 0xe8030000 - 0xe803ffff (0x10000) MX[b](B)
[10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
[11] -1 0 0xe8020000 - 0xe802ffff (0x10000) MX[b](B)
[12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000c200 - 0x0000c27f (0x80) IX[b]
[16] -1 0 0x0000c100 - 0x0000c11f (0x20) IX[b]
[17] -1 0 0x0000df00 - 0x0000df7f (0x80) IX[b]
[18] -1 0 0x0000de00 - 0x0000de0f (0x10) IX[b]
[19] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[20] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[21] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[22] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[23] -1 0 0x0000d900 - 0x0000d97f (0x80) IX[b]
[24] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
[25] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[26] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[27] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[28] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[29] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[b]
[30] -1 0 0x0000d100 - 0x0000d107 (0x8) IX[b]
[31] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[32] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[33] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[b]
[34] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[b](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.40.4
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.402
(II) ATI Proprietary Linux Driver Build Date: Jul 31 2007 22:20:14
Backtrace:
0: Xorg(xf86SigHandler+0x84) [0x80d0574]
1: [0xb7fdc420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x11b) [0xb7a95bfb]
3: Xorg(DoConfigure+0x20c) [0x80ce37c]
4: Xorg(InitOutput+0x66a) [0x809fc0a]
5: Xorg(main+0x27b) [0x806e36b]
6: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7df5f90]
7: Xorg(FontFileCompleteXLFD+0xa9) [0x806d8b1]
Fatal server error:
Caught signal 11. Server aborting
If I enable the testing repository and perform a full system upgrade, I can get X to work with the open source drivers for ATI. But I need to get fglrx to work in order to use tv-out. So there seem to be a problem with Xorg itself, not the driver in this case.
Any ideas?
Last edited by twarkie (2007-09-26 23:45:54)

Well, in your previous log, the crash backtrace:
Backtrace:
0: Xorg(xf86SigHandler+0x84) [0x80d0574]
1: [0xb7fdc420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x11b) [0xb7a95bfb]
3: Xorg(DoConfigure+0x20c) [0x80ce37c]
4: Xorg(InitOutput+0x66a) [0x809fc0a]
5: Xorg(main+0x27b) [0x806e36b]
6: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7df5f90]
7: Xorg(FontFileCompleteXLFD+0xa9) [0x806d8b1]
died inside /usr/lib/xorg/modules/drivers/fglrx_drv.so - so I figured if you removed fglrx, Xorg -configure wouldn't try to use that module, and the crash would go away. I'm glad I guessed right.
Could you please add [solved] to your topic title?

Can't figure how to write Xorg configuration for second screen

Basically I've got the main monitor going as it should, but I can't configure the secondary monitor.
The monitors:
Main monitor: 2560x1440, 144Hz, normal rotation, placed to the left.
Secondary monitor: 1920x1080, 60Hz, rotated clockwise, placed to the right.
An important detail is that the main screen has a broken EDID (/var/log/Xorg.0.log has errors and warnings about it). Without the lines currently present in my Xorg configuration, X won't start.
This is important to note because I can't rely on Xorg figuring out the monitors on its own (as I've done on most setups the last decade or so).
Here's the current version of /etc/X11/xorg.conf.d/10-monitor.conf:
Section "Monitor"
Identifier "DP-0"
Option "Primary" "true"
Modeline "2560x1440@144" 3322.15 2560 2592 15216 15248 1440 1460 1493 1513
EndSection
Section "Monitor"
Identifier "HDMI-0"
Option "Rotate" "Left"
Option "RightOf" "DP-0"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
Option "NoLogo"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "DP-0"
DefaultDepth 24
SubSection "Display"
Modes "2560x1440_144"
EndSubSection
EndSection
The second "Monitor" section seems to be non-working at the moment, that monitor stays black.
I've tried adding plenty of different things to that, but i can't ever get the secondary monitor going (the main one works).
The following command gets it working, but it's not in the configuration file and I don't how to translate the command:
xrandr --output HDMI-0 --mode 1920x1080 --right-of DP-0 --rotate left
Here's the output from xrandr before running the above command:
Screen 0: minimum 8 x 8, current 2560 x 1440, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected (normal left inverted right x axis y axis)
1920x1080 59.93 + 60.00 59.94 50.00 60.05 60.00 50.04
1680x1050 59.95
1280x1024 60.02
1280x960 60.00
1280x720 60.00 59.94 50.00
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 59.94
640x480 59.94 59.93
DP-0 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 598mm x 336mm
2560x1440 59.95 + 144.00* 120.00 99.95 84.98 23.97
DP-1 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
Unknown-0 disconnected (normal left inverted right x axis y axis)
Here's the output from xrandr after running the command above:
Screen 0: minimum 8 x 8, current 3640 x 1920, maximum 16384 x 16384
DVI-I-0 disconnected (normal left inverted right x axis y axis)
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 connected 1080x1920+2560+0 left (normal left inverted right x axis y axis) 530mm x 300mm
1920x1080 59.93*+ 60.00 59.94 50.00 60.05 60.00 50.04
1680x1050 59.95
1280x1024 60.02
1280x960 60.00
1280x720 60.00 59.94 50.00
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 59.94
640x480 59.94 59.93
DP-0 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 598mm x 336mm
2560x1440 59.95 + 144.00* 120.00 99.95 84.98 23.97
DP-1 disconnected (normal left inverted right x axis y axis)
DVI-D-0 disconnected (normal left inverted right x axis y axis)
Unknown-0 disconnected (normal left inverted right x axis y axis)
This suggests to me that in my Xorg configuration I should configure the "Screen" section differently, since in the second "xrandr" output, the first line (that starts with "Screen0") contains the resolution "3640 x 1920".
However, when I tried to replace the line "Modes "2560x1440_144"" with "Modes "3640x1920"", X didn't start.
Any ideas on how to solve this?
EDIT: Added more information.
Last edited by linduxed (2015-04-05 08:27:11)

Your PreferredMode line is wrong, it should be 2560x1440@144, not 2560x1440_144. You see, the numbers are meaningless, what you provide with Modeline is a name. And then everywhere else, you refer to that name. To demonstrate, if the Nvidia driver supports PreferredMode, this will work
Section "Monitor"
Identifier "DP-0"
Option "Primary" "true"
Modeline "ugabuga" 3322.15 2560 2592 15216 15248 1440 1460 1493 1513
Option "PreferredMode" "ugabuga"
EndSection
If this doesn't work, we'll try Nvidia's MetaModes option instead of PreferredMode.
About the Device section, you don't need it because selecting the nvidia driver is taken care of by /usr/share/X11/xorg.conf.d/nvidia-drm-outputclass.conf
Last edited by Gusar (2015-04-05 11:31:02)

Xorg.conf file after install? Where?

I know this is probably the worst question to ask but I couldn't find anything in the search for it. I just installed Arch (using a .7 CD) with an FTP install and naturally it chose the xorg7 version. His XServer starts alright but I noticed we both can't seem to find the xorg.conf file... usually it's in the /etc/X11/ folder (I think that's where it is on mine at home.)
The mouse, screen and almost everything works but for the life of me I can't find this configuration file. Does it use defaults if one doesn't exist or perhaps it's somewhere I'm not looking? Any advice would be appreciated as it isn't using the nvidia glx drivers but the basic nv.
Thanks in advance.
(Forgot to mention I'm used to using the X.org 6 version on my home PC and just trying to figure this out before I upgrade to 7.)

mac57 wrote:Alternately, you can just copy an old xorg.conf from another distro you have been using, place it in /etc/X11/xorg.conf and edit appropriately. This is what I did, and it worked like a champ.
You'll want to be carefull about that with xorg7. The path locations will change then. It may be better to generate a new one and copy in the difference in options.

Xorg.conf file just for synaptics trackpad ?

I have a problem at the moment with my laptops synaptics trackpad.
every other distro the trackpad side scrolling works fine but with Arch it only works with an xorg.conf (it did on Xorg 1.5 anyway)
If I use hotplugging the side scrolling works but after 5 or 10 mins just stops working until I reboot the machine. I have even added the settings into the .fdi file for hotplugging and still it fails after a short while.
I have only been succesfull when using an xorg.conf but after upgrading to Xorg 1.6 using a xorg.conf has just been a headache (keyboard not working and even kernel panics)
so is it possible to just have my synaptics settings in a xorg.conf and let hotplugging sort the rest ?
cheers
GreyMatta

You need to set it up in a hal configuration file just like you would do with your keyboard.
[stijn@hermes ~]$ cat /etc/hal/fdi/policy/11-x11-synaptics.fdi
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.touchpad">
<match key="info.product" contains="AlpsPS/2 ALPS">
<merge key="input.x11_driver" type="string">synaptics</merge>



<merge key="input.x11_options.Protocol" type="string">auto-dev</merge>
<merge key="input.x11_options.Emulate3Buttons" type="string">true</merge>
<merge key="input.x11_options.EmulateMidButtonTime" type="string">75</merge>
<merge key="input.x11_options.SHMConfig" type="string">on</merge>
<merge key="input.x11_options.LeftEdge" type="string">50</merge>
<merge key="input.x11_options.RightEdge" type="string">1000</merge>
<merge key="input.x11_options.TopEdge" type="string">50</merge>
<merge key="input.x11_options.BottomEdge" type="string">750</merge>
<merge key="input.x11_options.FingerLow" type="string">20</merge>
<merge key="input.x11_options.FingerHigh" type="string">30</merge>
<merge key="input.x11_options.MaxTapTime" type="string">180</merge>
<merge key="input.x11_options.MaxTapMove" type="string">110</merge>
<merge key="input.x11_options.VertEdgeScroll" type="string">true</merge>
<merge key="input.x11_options.HorizEdgeScroll" type="string">true</merge>
<merge key="input.x11_options.CornerCoasting" type="string">true</merge>
<merge key="input.x11_options.CoastingSpeed" type="string">0.30</merge>
<merge key="input.x11_options.VertScrollDelta" type="string">20</merge>
<merge key="input.x11_options.HorizScrollDelta" type="string">20</merge>
<merge key="input.x11_options.MinSpeed" type="string">0.10</merge>
<merge key="input.x11_options.MaxSpeed" type="string">0.60</merge>
<merge key="input.x11_options.AccelFactor" type="string">1</merge>
<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton2" type="string">2</merge>
<merge key="input.x11_options.TapButton3" type="string">3</merge>
</match>
</device>
</deviceinfo>

Xorg configuration over a laptop with iintel video card

Hi to everybody!!!
I'm a newbie in using archlinux. I decided to use it after my curiosity in learning more about this OS!
I've installed archlinux 0.7.2 in base version and then I upgraded everything.
I've installed KDE, but in configuring my xorg.conf file, I'm having lots of problem.
I've got a notebook, an acer travelmate 611TXV with embedded intel video card (82815 CGC). Typing
lshwd | less
, the monitor shows:
VGA compatible controller: Intel Coorp. |82815 CGC [Chipset Graphics Controller] (vesa)
I should consider vesa driver or not?
When I set xorg.conf (generate with
hwd -xa
command, I create e new device to describe my video card, because there wasn't, like this:
Section "Device"
Identifier "Card0"
Driver "vesa"
VendorName "All"
BoardName "All"
EndSection
typing
startx
kde starts, but it uses a too low video resolution. It should use 1280x768, the lcd is 14.1"
I can't set the right one! how to?
what I have to do with that "Modeline...
that are reater my lcd capabilities? can I delete them?
Over win XP the lcd woks fine at 1280x768 with 60Hz.
Is there someone to help me? Please
Vincenzo

Hi!
thanks for your reply!
My xorg.conf is posted as follows. It's very very similar to the original obtained with standard installation steps.
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "it, IT"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "vesa"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
Subsection "Display"
Depth 16
Modes "1024x768@60"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
I don't know why if I change the default color depth to 24, my resolution becomes 640x480!
Please help me!
Thanks for all
Vincenzo

Xorg -configure don't work with PB DotM

hello folks
i got a brand new packardbell dotM netbook , how i use arch in my worksation i decided to install arch in the netbook
every goes fine exept when i want to configure Xorg.
i installed the xf86-video-intell package, and tryed to make a "Xorg -configure" that work with the screen ( by the way the screen is very special http://www.tecnologiait.com.ar/?p=7315 the standart resolution is 1204x600 !!
what recommend me do to guys?, use Xorg -configure don't work ( even show tvm) , and intel doesn't provide a tool like the nvidia-xconfig,
or should i write my own xorg.conf file?
ohh yes and could you make me a suggestion for a DE, i tried kdemod in the netbook ( i am kde-lover) but without a big Gpu kdemod goes slow, which DE to do recommend for a netbook, i am between E17 and LXDE
thanks in advance

Hello Slacknatcher!
You can port a working configuration file, from another working distribution, or from livecd like Chakra, Ubuntu, Sushe.
Can it work if you try without any xorg.conf file? Can you try out another drivers, like binary nvidia from nvidia, or opensource nv? And in the last case vesa?

[SOLVED] Xorg problem: fglrx, startx & Xorg -configure

Hi,
On a HP 8510p notebook (Core 2 Duo, AMD/ATI Mobility Radeon HD 2600)
I have just installed Arch Linux, did a system update (pacman -Syu), installed the catalyst package, which depends on xorg-server, among others.
When I do a "Xorg -configure" it fails with a "Fatal server error: Caught signal 11. Server aborting". As I see in /var/log/Xorg.0.log, I don't get an (EE)/error. I just can' understand why the X server fails.
/var/log/Xorg.0.log - with no /etc/X11/xorg.conf file
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux archlinux 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 24 21:09:40 2007
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 103c,30c5 rev 0c class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2a01 card 0000,0000 rev 0c class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 8086,2a04 card 103c,30c5 rev 0c class 07,80,00 hdr 80
(II) PCI: 00:03:2: chip 8086,2a06 card 103c,30c5 rev 0c class 01,01,85 hdr 00
(II) PCI: 00:03:3: chip 8086,2a07 card 103c,30c5 rev 0c class 07,00,02 hdr 00
(II) PCI: 00:19:0: chip 8086,1049 card 103c,30c5 rev 03 class 02,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2834 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 103c,30c5 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2811 card 103c,30c5 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 103c,30c5 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 103c,30c5 rev 03 class 01,06,01 hdr 00
(II) PCI: 01:00:0: chip 1002,9581 card 103c,30c5 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,aa08 card 103c,30c5 rev 00 class 04,03,00 hdr 80
(II) PCI: 02:06:0: chip 1180,0476 card 6000,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1180,0476 card 6800,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 1180,0832 card 103c,30c5 rev 03 class 0c,00,10 hdr 80
(II) PCI: 02:06:3: chip 1180,0822 card 103c,30c5 rev 20 class 08,05,00 hdr 80
(II) PCI: 02:06:4: chip 1180,0843 card 103c,30c5 rev 10 class 08,80,00 hdr 80
(II) PCI: 10:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,40), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4400000 - 0xe44fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:28:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 16: bridge is at (0:28:1), (0,16,16), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe40fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 40: bridge is at (0:28:4), (0,40,40), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 40 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
[4] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[5] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[6] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 40 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,7), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4100000 - 0xe43fffff (0x300000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x80000000 - 0x87ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,3), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (2:6:1), (2,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[1] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x84000000 - 0x87ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9581) rev 0, Mem @ 0xd0000000/28, 0xe4400000/16, I/O @ 0x4000/8
List of video drivers:
fglrx
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
Module class: X.Org Video Driver
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.43.2
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.433
(II) ATI Proprietary Linux Driver Build Date: Nov 9 2007 21:19:16
Backtrace:
0: Xorg(xf86SigHandler+0x7e) [0x80d9d5e]
1: [0xb7f03420]
2: /usr/lib/xorg/modules/drivers//fglrx_drv.so(atiddxProbeMain+0x13b) [0xb792a5ab]
3: Xorg(DoConfigure+0x211) [0x80dc9f1]
4: Xorg(InitOutput+0x61a) [0x80a7a9a]
5: Xorg(main+0x296) [0x8073b66]
6: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7cd5390]
7: Xorg(FontFileCompleteXLFD+0x201) [0x80730d1]
Fatal server error:
Caught signal 11. Server aborting
Obs: When I do a "startx", with a custom and minimalist xorg.conf, my notebook stops to respond (doesn't function Ctrl-Alt-Backspace, Alt-F2,3..., Ctrl-C... noting) and the screen is all black.
But first, I think it should work the "Xorg -configure"
Last edited by Claudiu2EE (2007-11-30 18:45:20)

Hi!
I'll post some more information...
When I do "startx", like I said, it seems that X is starting, the display changes from grey to black and dark-grey again... but then I can't do nothing to exit, but to press the power button.
So, as no "hwd -x" (uses lshwd -> Segmentation fault) or "Xorg -configure" (Caught signal 11. Server aborting) works, I wrote a xorg.conf by 0, googleing around and inspiring me from the Arch Wiki.
I have no ~/.xinitrc (I have tried with one who had an exec xterm, but no success)
Package information:
xorg-server 1.4-5
xorg-xinit 1.0.7-1
xorg-twm 1.0.1-2
xterm 229-2
catalyst 7.11-1
/etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi/:unscaled"
#FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
#FontPath "/usr/share/fonts/75dpi"
# path to defoma fonts
#FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "AIGLX" "off"
EndSection
Section "Module"
#Load "dri" # direct rendering infrastructure which makes opengl go fast
Load "glx" # glx and glcore implement opengl
#Load "GLcore"
Load "extmod" # collection of X protocol extentions that shouldn't even be loadable
#Load "int10" # vesa bios interface for card setup stuff
#Load "vbe"
#Load "i2c" # serial bus over which you speak the ddc protocol to get info from the monitor
Load "ddc"
Load "freetype" # load freetype fonts and type 1 fonts
Load "type1"
Load "dbe"
EndSection
Section "Extensions"
Option "Composite" "off"
EndSection
Section "InputDevice"
Identifier "Generic Notebook Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "es"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Generic USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "SHMConfig" "on"
EndSection
Section "Device"
Identifier "ATI Mobility Radeon HD 2600"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Generic Notebook Monitor"
ModelName "AUO LCD MONITOR"
VendorName "AUO"
DisplaySize 331 207
VertRefresh 43-60
HorizSync 30-62
Option "DPMS"
# UseModes "Widescreen Modes"
EndSection
#Section "Modes"
# Identifier "Widescreen Modes"
# Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
#EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Mobility Radeon HD 2600"
Monitor "Generic Notebook Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
InputDevice "Generic Notebook Keyboard" "CoreKeyboard"
#InputDevice "Generic USB Mouse"
InputDevice "Synaptics Touchpad" "CorePointer"
EndSection
Section "DRI"
Mode 0666
EndSection
/var/log/Xorg.0.log
X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-rc1-ARCH i686
Current Operating System: Linux archlinux 2.6.23-ARCH #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007 i686
Build Date: 07 November 2007 11:19:12AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 25 13:34:07 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Notebook Monitor"
(**) | |-->Device "AMD Radeon 2600HD"
(**) |-->Input Device "Generic Notebook Keyboard"
(**) |-->Input Device "Synaptics Touchpad"
(**) Option "AllowMouseOpenFail" "on"
(**) Option "AIGLX" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(II) No default mouse found, adding one
(**) |-->Input Device "<default pointer>"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d4540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2a00 card 103c,30c5 rev 0c class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2a01 card 0000,0000 rev 0c class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 8086,2a04 card 103c,30c5 rev 0c class 07,80,00 hdr 80
(II) PCI: 00:03:2: chip 8086,2a06 card 103c,30c5 rev 0c class 01,01,85 hdr 00
(II) PCI: 00:03:3: chip 8086,2a07 card 103c,30c5 rev 0c class 07,00,02 hdr 00
(II) PCI: 00:19:0: chip 8086,1049 card 103c,30c5 rev 03 class 02,00,00 hdr 00
(II) PCI: 00:1a:0: chip 8086,2834 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1a:1: chip 8086,2835 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1a:7: chip 8086,283a card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1b:0: chip 8086,284b card 103c,30c5 rev 03 class 04,03,00 hdr 00
(II) PCI: 00:1c:0: chip 8086,283f card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:1: chip 8086,2841 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1c:4: chip 8086,2847 card 0000,0000 rev 03 class 06,04,00 hdr 81
(II) PCI: 00:1d:0: chip 8086,2830 card 103c,30c5 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,2831 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,2832 card 103c,30c5 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,2836 card 103c,30c5 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev f3 class 06,04,01 hdr 01
(II) PCI: 00:1f:0: chip 8086,2811 card 103c,30c5 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2850 card 103c,30c5 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:2: chip 8086,2829 card 103c,30c5 rev 03 class 01,06,01 hdr 00
(II) PCI: 01:00:0: chip 1002,9581 card 103c,30c5 rev 00 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,aa08 card 103c,30c5 rev 00 class 04,03,00 hdr 80
(II) PCI: 02:06:0: chip 1180,0476 card 6000,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:1: chip 1180,0476 card 6800,0000 rev b9 class 06,07,00 hdr 82
(II) PCI: 02:06:2: chip 1180,0832 card 103c,30c5 rev 03 class 0c,00,10 hdr 80
(II) PCI: 02:06:3: chip 1180,0822 card 103c,30c5 rev 20 class 08,05,00 hdr 80
(II) PCI: 02:06:4: chip 1180,0843 card 103c,30c5 rev 10 class 08,80,00 hdr 80
(II) PCI: 10:00:0: chip 8086,4229 card 8086,1101 rev 61 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,40), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x00004000 - 0x000040ff (0x100) IX[b]
[1] -1 0 0x00004400 - 0x000044ff (0x100) IX[b]
[2] -1 0 0x00004800 - 0x000048ff (0x100) IX[b]
[3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4400000 - 0xe44fffff (0x100000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 8: bridge is at (0:28:0), (0,8,8), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 16: bridge is at (0:28:1), (0,16,16), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe40fffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 40: bridge is at (0:28:4), (0,40,40), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 40 I/O range:
[0] -1 0 0x00002000 - 0x000020ff (0x100) IX[b]
[1] -1 0 0x00002400 - 0x000024ff (0x100) IX[b]
[2] -1 0 0x00002800 - 0x000028ff (0x100) IX[b]
[3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[b]
[4] -1 0 0x00003000 - 0x000030ff (0x100) IX[b]
[5] -1 0 0x00003400 - 0x000034ff (0x100) IX[b]
[6] -1 0 0x00003800 - 0x000038ff (0x100) IX[b]
[7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[b]
(II) Bus 40 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,7), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
[2] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xe4100000 - 0xe43fffff (0x300000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x80000000 - 0x87ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:6:0), (2,3,3), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00006000 - 0x000060ff (0x100) IX[b]
[1] -1 0 0x00006400 - 0x000064ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 4: bridge is at (2:6:1), (2,4,7), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00006800 - 0x000068ff (0x100) IX[b]
[1] -1 0 0x00006c00 - 0x00006cff (0x100) IX[b]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x84000000 - 0x87ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9581) rev 0, Mem @ 0xd0000000/28, 0xe4400000/16, I/O @ 0x4000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[1] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[2] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[3] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[4] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[5] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[6] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[7] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[8] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[9] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[10] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[11] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[12] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[13] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[16] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[17] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[18] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[19] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[20] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[26] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[27] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[28] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[29] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[30] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[31] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[32] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[33] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[34] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[35] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[36] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[37] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 4.3.99.902, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.43.2
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.433
(II) ATI Proprietary Linux Driver Build Date: Nov 9 2007 21:19:16
(--) Chipset Supported AMD Graphics Processor (0x9581) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[21] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[22] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[23] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[24] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[25] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[26] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[31] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[32] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[33] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[34] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[35] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[36] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[37] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[38] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[39] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[40] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[41] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[42] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[43] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x8206b38
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[5] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[6] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[7] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[8] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[9] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[10] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[11] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[12] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[13] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[14] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[15] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[16] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[17] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[24] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[25] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[26] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[27] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[28] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[29] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[34] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[35] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[36] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[37] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[38] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[39] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[40] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[41] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[42] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[43] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[44] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[45] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[46] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
[47] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[48] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 2600" (Chipset = 0x9581)
(--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x30c5)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xe4400000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.56
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M76
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.43.2
ABI class: X.Org Server Extension, version 0.3
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: AUO Model: 2074 Serial#: 0
(II) fglrx(0): Year: 2006 Week: 1
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1417 h_border: 0
(II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 815 v_border: 0
(II) fglrx(0): AUO
(II) fglrx(0): B154EW02 V0
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0006af742000000000
(II) fglrx(0): 01100103802115780a1cf59758508e27
(II) fglrx(0): 27505400000001010101010101010101
(II) fglrx(0): 010101010101121b008950200f303020
(II) fglrx(0): 36004bcf100000180000000f00000000
(II) fglrx(0): 00000000000000000020000000fe0041
(II) fglrx(0): 554f0a202020202020202020000000fe
(II) fglrx(0): 004231353445573032205630200a007f
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(==) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 12 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x800 (pitch 0)
(**) fglrx(0): *Mode "1280x800": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0 69.30 1280 1328 1360 1417 800 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1280x720": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1328 1360 1417 720 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1024x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1328 1360 1417 768 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "800x600": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1328 1360 1417 600 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "720x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 69.30 720 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x432": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0 69.30 640 1328 1360 1417 432 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x400": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 69.30 640 1328 1360 1417 400 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "512x384": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 69.30 512 1328 1360 1417 384 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "400x300": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0 69.30 400 1328 1360 1417 300 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x240": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0 69.30 320 1328 1360 1417 240 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x200": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0 69.30 320 1328 1360 1417 200 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Display dimensions: (331, 207) mm
(**) fglrx(0): DPI set to (98, 98)
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800"x60.0 69.30 1280 1328 1360 1417 800 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1280x720": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 69.30 1280 1328 1360 1417 720 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "1024x768": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 69.30 1024 1328 1360 1417 768 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "800x600": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 69.30 800 1328 1360 1417 600 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "720x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 69.30 720 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x480": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 69.30 640 1328 1360 1417 480 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x432": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x432"x60.0 69.30 640 1328 1360 1417 432 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "640x400": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 69.30 640 1328 1360 1417 400 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "512x384": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 69.30 512 1328 1360 1417 384 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "400x300": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "400x300"x60.0 69.30 400 1328 1360 1417 300 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x240": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x240"x60.0 69.30 320 1328 1360 1417 240 803 809 815 +hsync +vsync (48.9 kHz)
(**) fglrx(0): Default mode "320x200": 69.3 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "320x200"x60.0 69.30 320 1328 1360 1417 200 803 809 815 +hsync +vsync (48.9 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): HPV inactive
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pcie] 258048 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe4400000 - 0xe440ffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xe4000000 - 0xe4001fff (0x2000) MX[b]
[7] -1 0 0xe4104000 - 0xe41040ff (0x100) MX[b]
[8] -1 0 0xe4103000 - 0xe41030ff (0x100) MX[b]
[9] -1 0 0xe4102000 - 0xe41027ff (0x800) MX[b]
[10] -1 0 0xe4410000 - 0xe4413fff (0x4000) MX[b]
[11] -1 0 0xe4549000 - 0xe45497ff (0x800) MX[b]
[12] -1 0 0xe4548000 - 0xe45483ff (0x400) MX[b]
[13] -1 0 0xe4544000 - 0xe4547fff (0x4000) MX[b]
[14] -1 0 0xe4541000 - 0xe45413ff (0x400) MX[b]
[15] -1 0 0xe4540000 - 0xe4540fff (0x1000) MX[b]
[16] -1 0 0xe4520000 - 0xe453ffff (0x20000) MX[b]
[17] -1 0 0xe4501000 - 0xe4501fff (0x1000) MX[b]
[18] -1 0 0xe4500000 - 0xe450000f (0x10) MX[b]
[19] -1 0 0xe4400000 - 0xe440ffff (0x10000) MX[b](B)
[20] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[24] 0 0 0x00004000 - 0x000040ff (0x100) IX[b]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[26] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[27] -1 0 0x00005140 - 0x0000515f (0x20) IX[b]
[28] -1 0 0x00001574 - 0x00001577 (0x4) IX[b]
[29] -1 0 0x00001370 - 0x00001377 (0x8) IX[b]
[30] -1 0 0x000015f4 - 0x000015f7 (0x4) IX[b]
[31] -1 0 0x000013f0 - 0x000013f7 (0x8) IX[b]
[32] -1 0 0x00005100 - 0x0000510f (0x10) IX[b]
[33] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[34] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[35] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[36] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[37] -1 0 0x000050e0 - 0x000050ff (0x20) IX[b]
[38] -1 0 0x000050c0 - 0x000050df (0x20) IX[b]
[39] -1 0 0x000050a0 - 0x000050bf (0x20) IX[b]
[40] -1 0 0x00005080 - 0x0000509f (0x20) IX[b]
[41] -1 0 0x00005060 - 0x0000507f (0x20) IX[b]
[42] -1 0 0x00005040 - 0x0000505f (0x20) IX[b]
[43] -1 0 0x00005030 - 0x00005037 (0x8) IX[b]
[44] -1 0 0x00005020 - 0x0000502f (0x10) IX[b]
[45] -1 0 0x00005018 - 0x0000501b (0x4) IX[b]
[46] -1 0 0x00005010 - 0x00005017 (0x8) IX[b]
[47] -1 0 0x00005008 - 0x0000500b (0x4) IX[b]
[48] -1 0 0x00005000 - 0x00005007 (0x8) IX[b]
[49] -1 0 0x00004000 - 0x000040ff (0x100) IX[b](B)
[50] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[51] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(WW) fglrx(0): could not detect X server version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [drm] installed DRM signal handler
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.43.2
(II) fglrx(0): Date: Nov 9 2007
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.23-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00005000
(II) fglrx(0): Interrupt handler installed at IRQ 16.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01000400
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,3277)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 2477
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 10
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
[atiddx] ASYNCIO init succeed!
Receive enable interrupt ret message
...irqEnableMask: 60000001
...dwIRQEnableId: 00000006
Receive enable interrupt ret message
...irqEnableMask: 00000040
...dwIRQEnableId: 00000007
Receive enable interrupt ret message
...irqEnableMask: ff00002c
...dwIRQEnableId: 00000008
Receive enable interrupt ret message
...irqEnableMask: ff00002d
...dwIRQEnableId: 00000009
Receive enable interrupt ret message
...irqEnableMask: 20000400
...dwIRQEnableId: 0000000a
(II) fglrx(0): Finished Initialize PPLIB!
(II) fglrx(0): Enable the clock gating
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
Please, assist me in this problem.
Thank you.

Nano syntax highlighting: catch-all syntax for configuration files

After years of using nano, I only recently learned that it supports syntax coloring... (Why would they turn that off by default? ) Well, I thought I'll make up for it by making extra good use of it from now on...
Unfortunately it didn't ship a highlighting syntax for the the kind of files that I use nano the most for: system configuration files.
So I wrote my own, and after tweaking a bit here and there whenever I encountered a config file for which the highlighting wasn't satisfactory at first, I think the result is now good enough (screenshots below) that it's worth sharing with my fellow Arch users:
Code & Instructions:
Here is the syntax definition:
# config file highlighting
syntax "conf" "(\.(conf|config|cfg|cnf|rc|lst|list|defs|ini|desktop|mime|types|preset|cache|seat|service|htaccess)$|(^|/)(\w*crontab|mirrorlist|group|hosts|passwd|rpc|netconfig|shadow|fstab|inittab|inputrc|protocols|sudoers)$|conf.d/|.config/)"
# default text
color magenta "^.*$"
# special values
icolor brightblue "(^|\s|=)(default|true|false|on|off|yes|no)(\s|$)"
# keys
icolor cyan "^\s*(set\s+)?[A-Z0-9_\/\.\%\@+-]+\s*([:]|\>)"
# commands
color blue "^\s*set\s+\<"
# punctuation
color blue "[.]"
# numbers
color red "(^|\s|[[/:|<>(){}=,]|\])[-+]?[0-9](\.?[0-9])*%?($|\>)"
# keys
icolor cyan "^\s*(\$if )?([A-Z0-9_\/\.\%\@+-]|\s)+="
# punctuation
color blue "/"
color brightwhite "(\]|[()<>[{},;:=])"
color brightwhite "(^|\[|\{|\:)\s*-(\s|$)"
# section headings
icolor brightyellow "^\s*(\[([A-Z0-9_\.-]|\s)+\])+\s*$"
color brightcyan "^\s*((Sub)?Section\s*(=|\>)|End(Sub)?Section\s*$)"
color brightcyan "^\s*\$(end)?if(\s|$)"
# URLs
icolor green "\b(([A-Z]+://|www[.])[A-Z0-9/:#?&$=_\.\-]+)(\b|$| )"
# XML-like tags
icolor brightcyan "</?\w+((\s*\w+\s*=)?\s*("[^"]*"|'[^']*'|!?[A-Z0-9_:/]))*(\s*/)?>"
# strings
color yellow "\"(\\.|[^"])*\"" "'(\\.|[^'])*'"
# comments
color white "#.*$"
color blue "^\s*##.*$"
color white "^;.*$"
color white start=""
To install, save the above above code snippet as a file called conf.nanorc in the folder /usr/share/nano/ (or /usr/local/share/nano/ or similar if you feel strongly about the /usr <--> /usr/local separation), and then add the following to the end of the file /etc/nanorc:
## Configuration files (catch-all syntax)
include "/usr/share/nano/conf.nanorc"
Hints:
The colors I chose look good (imo) with the terminal background and color settings that I use, but might not look good, or even readable, with yours, so simply change the color names in the code snippet to whatever you prefer - valid color names are:
If you use a console with white background, you'll have to change at least the white color I chose for comments and punctuation.
The first code line in the snippet includes a regular expression that defines for which file names this syntax highlighting should be used. Whenever you encounter a config file that is not matched by this, but you would still like to open it with syntax highlighting, you can manually select this syntax with nano's -Y switch, like so:
nano -Y conf myConfigFile
Technical Note:
It's implemented as a single catch-all syntax, since nano chooses which syntax to apply based on the filename, and in the case of config files usually not much can be learned about the content format from the file name extension (.conf can by anything from flat key/value tuples to XML, .ini can be the official INI format or something else, etc...).
This means that some compromises have been made, so with this highlighting syntax probably no config file looks 100% as good as a highlighting syntax that would be specifically optimized for one kind of config format, but all in all the vast majority of config files should look pretty good.
Screenshots:
/etc/rc.conf, /etc/hosts:
/etc/pacman.conf, /etc/group:
xorg.conf, some .desktop file:
httpd.conf (Apache config), php.ini:
More screenshots:
/etc/fonts/fonts.conf (uses XML)
/etc/inittab
/etc/fstab
/etc/inputrc
/etc/mime.types
/etc/protocols
/etc/xinetd.conf
See Also:
nano syntax highlighting: GNU makefiles
Update [2012-01-28]: Made some more improvements to the syntax definition (see post)
Last edited by sas (2012-02-01 15:26:43)

doug piston wrote:I deal with alot of .mk files and would love to see it there.
You mean GNU makefiles?
I'm afraid they might be out of scope for this generic config-file syntax.
Logically they're not system config files, and technically they're a pretty specialized and complex format (different "types" of rules, rules spanning multiple lines, rules containing arbitrary Bash code, etc.).
This is how an .mk file currently looks with this highlighting syntax:
$ nano -Y conf /usr/lib/httpd/build/rules.mk
And apart from highlighting variables of the form $$abc or $(abc), I'm not sure how much can be improved here without breaking the highlighting for more conventional config files.
It would probably be better to create a specialized highlighting syntax just for .mk files.
EDIT: I sat down and did just that, here's the result: nano syntax highlighting: GNU makefiles, and here is how the above makefile snipped looks with it:
Last edited by sas (2012-02-01 15:18:52)

Dell vostro 3500 Xorg configuration problem

Hello i have this dell laptop that i dont not know how to configure xorg
Monitor
15.6" 40 cm High definition large screen (1366x768) WLED antireflet (WLAN uniquement)
Graphic Card
Carte graphique : Intel® Integrated Graphics Media Accelerator HD
anyone has any suggestions ?
after a few times i installed the chakra linux and hoping to use its xorg config files but i couldn't find it
thanks in advance

It should work out of the box, witout config files (if there are any - simply remove them).
Otherwise you may have a look here: http://wiki.debian.org/XStrikeForce/HowToRandR12

Safe way to edit system configuration files?

What is a safe way to edit a system configuration file? I mean I did this twice: I edited rc.conf, rebooted and the system failed to boot. Then I had to edit out the typos with a LiveCD.
Is there like a visudo (that edits /etc/sudoers) for rc.conf, xorg.conf, fstab and so on?
Thanks!

Majorix wrote:
No I am of course editing those files with sudo. But the problem is, gedit won't check the file for possible errors, thus if you too oversee it and try to reboot using those system files, you will fail.
visudo checks you while you edit, so if you make an error it will warn you in the end.
I was asking if there was a similar tool for the rest of the configuration files.
Sorry for not being clear.
Oh -- a kind of a babysitter, you mean?
j/k, i screw up config files all the time.
No, as far as I know there is nothing like that for most files. some do have functionality like that, like I think lilo warns you when you write to lilo.conf and the file has errors. and you can run something like testparm for the smb.conf file, and I think there something similar to check apache config files, etc. but for the standard system config files or arch-specific files like rc.conf, fstab, etc. I don't think there is anything. you just have to be sure not to make any mistakes!

Xorgconfig or Xorg -configure?

Hi,
I recently converted to Arch from Ubuntu and this is my first post.
First of all, I wish to express my gratitude to all the developers for such an impressive work.
This distribution looks exceptional and seems to fit exactly what I was looking for.
I have a couple of questions (please forgive me if they are too simple - I don't have much experience with Linux).
1) How do I generate a good xorg.conf file? I noticed that there are several ways of doing this, each giving different results.
Which one is the best? I need to use two LCD displays in Merged Framebuffer mode.
2) A question about pacman: if I understand correctly, the command "pacman -Syu" will upgrade every package in the system to its most current state.
I read in some post (I cannot remember where exactly) that there have been cases in which the latest version of a package contained a bug that completely broke the Arch installation. I was wondering: Is there a way to tune pacman to a desired level of stability when performing upgrades?
For example: let's say one chooses to only upgrade packages when they have been proven to be highly stable. Is there an automated way of doing this?
Thank you so much for your time and for your help!

ionflux wrote:
Hi,
I recently converted to Arch from Ubuntu and this is my first post.
First of all, I wish to express my gratitude to all the developers for such an impressive work.
This distribution looks exceptional and seems to fit exactly what I was looking for.
I have a couple of questions (please forgive me if they are too simple - I don't have much experience with Linux).
1) How do I generate a good xorg.conf file? I noticed that there are several ways of doing this, each giving different results.
Which one is the best? I need to use two LCD displays in Merged Framebuffer mode.
Personally when I configured my Xorg system I download HWD. From what I have seen this seems to work well for me and most of the other machines I have put together for my family and friends.
1) Do a pacman -Sy hwd
This will download hwd.
2)Then run hwd -xa
This will run hwd and overwrite your Xorg file with the one is created. Caution though it will over write your old xorg file. Or you can use hwd -x just to generate one without over writing the original.
ionflux wrote:
2) A question about pacman: if I understand correctly, the command "pacman -Syu" will upgrade every package in the system to its most current state.
I read in some post (I cannot remember where exactly) that there have been cases in which the latest version of a package contained a bug that completely broke the Arch installation. I was wondering: Is there a way to tune pacman to a desired level of stability when performing upgrades?
For example: let's say one chooses to only upgrade packages when they have been proven to be highly stable. Is there an automated way of doing this?
Thank you so much for your time and for your help!
For the most part I have no experienced the problem with my arch system. Mainly because I do not use any of the servers that have experimental packages on them.
IF anyone finds anything wrong with what I have said please feel free to correct me.
PS: Boston rocks!!!!
Last edited by soundwave (2007-06-20 18:24:21)

Installation - Xorg Configuration Showstopper (resolved)

This morning, I had attempted to reinstall Arch Linux, after having tried Ubuntu for about a week or so. Install went well (once I had an up-to-date disc), but then I ran into a serious problem. The auto-generate xorg.conf files were not working. As soon as I tested X, I would be greeted by a black screen and then had to reboot manually. A few more attempts, and I discovered the problem: the contents of the xorg.conf file was getting erased whenever X read it! What the hell is going on!?
Last edited by Falcata (2009-06-10 20:58:07)

My new Arch install was behaving the exact same way last night. Btw, rather than rebooting, you might try CTRL+ALT+Fx and then back, where you might then be able to CTRL+C out of the test. That worked for me, though not every time.
Anyway, after struggling with X -configure /path/to/xorg.conf for an hour or so, I finally just tried startx, and it worked fine.
EDIT: I should add that when I finally got around to trying startx, I had already installed Fluxbox, hoping some part of that process might dislodge whatever was gumming up the works. I don't know if X would have worked without it or not.
Last edited by Quasimojo (2009-06-09 19:34:27)

[Configuration] Important configuration files [solved]

What are the most important configuration files in a Archlinux system that we must have as a backup ?
Please name theses files and post your configuration files in a link from http://pastebin.com/ if all work correctly on your side ...
Consider this thread as a cooperative backup so post your lspci output cause it may can help many others users with problems on their system ...
IMP: I hope that some has "00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)" fully working to repair my sound then
I will send my configuration also ...
May this thread help many peoples !!!
Results :
rc.conf
xorg.conf
pacman.d/mirrorlist
(mostly /etc and /home files ...)
Last edited by spiky25 (2009-11-23 00:01:06)

brando56894 wrote:I'd say one of the most important files is /etc/rc.conf, but there's are lot of other files/folders that are just as important. Whats your problem with the Intel HD Audio? its probably the same problem I had.
No matter what I do it refuse to work, sometime it was working before and it was working perfectly when I installed Arch by Chakra ...
It's the only problem that I have left so I don't really want to reinstall from zero ...

Xorg configuration file

Similar Messages

Maybe you are looking for