XQilla problem while building dbxml for Visual Studio 6

I am simply trying to build dbxml 2.4.16 in Visual Studio 6 on XP Pro. I am following the instructions. It fails to to link when it gets to xqilla. It seems to compiile ok then fails while linking saying it cannot open file xqilla21d.lib.
The only departure from the instructions was after it says the XercesLib.dsp makefile could not be generated by developer Studio and wraps the makefile for XercesLib.dsp and I save that as XercesLib1.dsp. The instructions say to build the XercesLib now, but the next thing that happens after I save XercesLib1.dsp is that it says it couldn't generate the makefile for xqillla and it asks about wrapping the xqulla makefile. The instructions didn't say anything about that. I said yes and it saved xqilla1.dsp then brings up all the classes in the classview. I can build the XercesLib1.exe fine. But then as I go to build all it eventually chokes giving the link error.
Can anyone offer any help?
Thanks,
Curt

George,
Thanks for taking the time to reply, though it was pretty discouraging. We have a legacy application that would cost too much to move out of Visual Studio 6. The compile and link process was almost at the end and it seemed only xqilla remained. We only need use dbxml under Visual Studio 6 in order to put xml documents into a database, but we have a stiff requirement for speed so we cant' afford the speed penalty that would come from including a layer like .NET or something. If you think that it won't build under VS 6 anymore I'll try to deal with that. If you think that there is a way to get it to build and then do the minimal function of putting documents into a database, from Visual C++ I'd appreciate to hear any thing else you may have to say.
Otherwise I'll just see if I can install VS 2003 .NET but not use the .NET and try that, or try Visual Studio 2005, again not using .NET.
Thanks,
Curt

Similar Messages

Where can I download WINCE 6.0 Platform Builder plugin for Visual Studio 2005?

I am supporting an older product that runs WINCE 6.0. I need to build a development environment. I understand the tool chain is based on Visual Studio 2005 SP1, which I have. I also have the Windows Embedded CE 6.0 Platform Builder Service Pack 1, but
what I can't seem to find anywhere on MSDN is the base Windows Embedded CE 6.0 Platform Builder.
FWIW, I have an MSDN Universal Subscription.
[EDIT] OK, I found it. The download is named simply Windows Embedded CE 6.0. There is no "Platform Builder" in the title.
Here is the link: https://msdn.microsoft.com/en-us/subscriptions/downloads/#FileId=10961

Thanks Henrik. My question is for the same customer that Alex K. was asking about.
The customer has pointed out that 6.5 != 6.0 , so according to the wording in the documentation, the "all later releases of 6.0" would not apply to 6.5 releases. So the customer would need a precise statement from JRockit product management stating that 6.5 releases are indeed to be included wherever there is a reference to "all later releases of 6.0".
I did spend some time yesterday in MetaLink. Search Knowledge base -> Oracle JRockit for download gives 38 hits. I did find older versions of WebLogic Server in 763603.1, but nothing for JRockit. If there is another DocId with the JRockit downloads, what is it? Will I find JRockit 64 bit for Solaris 27.6.0 bundled in the WebLogic Server downloads? Guessing from the size of the downloads for Solaris 64bit (they are hundreds of MB smaller than other downloads) - it seems possible that the JVM is not included (I do not have a Solaris machine to install and check). Previously I had assumed the JVM was included, but then the customer wouldn't be asking where they can download from (unless they never bother to look what they installed).
Michael.Reiche

Connection Problem When Using Oracle Developer Tools for Visual Studio

I tried to create an Oracle Connection in my Visual Studio 2008 after installing Oracle 11g, Oracle Data Access Components (ODAC) with Oracle Devleoper Tools for Vissual Studio version 11.1.0.6.20.
I followed the directions according to "Building .NET Applications Using Oracle Developer Tools for Visual Studio, when I click Test Connection, I keep getting the error message below.
Microsoft Visual Studio
ORA-12170: TNS:Connect timeout occurred
OK
---------------------------

I solved the problem.
This is what I did for the benefit of the embryonic newbe like me.
On the Add Connection Dialog
1.     For Data source name I selected Local Database
2.     I clicked on the specific User Name and I typed SYSTEM
3.     For Password, I typed orcl (the password I setup during the installation) (HR did not work for me for User name and Password according to the tutorial instructions)
4.     For Role, I selected Default
5.     Connection Name, I selected Local Database
6.     Before proceeding any further went to Windows XP SP3 where I was operating from, under Start Menu, I selected Administrative Tools then Services
a.     On the Windows Services (Local) Dialog, under name, I selected OracleServiceORCL and OracleOraDb11g_home1TNSListener. I clicked on them one at a time
b.     On the presented Dialog, under Service Status, I Clicked on the Start Button to start the Services
c.     Then I went back to the Add Connection Dialog. I clicked on Test Connection, it connected okay. I finally clicked on Okay to connect.

Crystal report for visual studio 2005 dblogin problem

Dear Sir,
I am using Visual Studio 2005 and crystal reports for visual studio 2005 and sql server 2000.
When I am running the project from my pc where it was developed and a local server with server authentication, report is opening but from client machine there is a new screen come before opening the report asking for login issue. my reports has subreports
also.
I am using dsn file to connect with server from crystal reports where dsn file contains as follows:
[ODBC]
DRIVER=SQL Server
UID=sa
PWD=sa
DATABASE=HRISDB
WSID=S-AGD-PAY01\HRSERVER
APP=Microsoft Data Access Components
SERVER=S-AGD-PAY01\HRSERVER
so it is dynamic bcoz i need change server name sometimes. my question is when same report want show user from their pc then below screen appears:
database login
server Name: C:\program files\HRIS\HRISDB.dsn
Databse: HRISDB
user id:
PassworD:
Integrated Security: it is checked and a finish button.
(i am sorry bcoz screenshort is not attaching so I write above what in the diagloag box for you)
then i need to uncheck the use integrated security and click finish then the reports come. THis is very annoying for my clients.
Please help me how can I overcome it.
It is mentionable that I didn't use any dblogin method in my code to like setdbloginforReport(). I think there is no problem bcoz the report show correctly. Just want to know how to overcome this screen.

You know, this forum is for controls, apis, components for the user interface Windows Forms.
Unlucky enough, Microsoft does not support Crystal reports anymore for many years.
Try the Crystal reports forum for .Net
http://scn.sap.com/community/crystal-reports-for-visual-studio
Success
Cor

Crystal Reports, version for Visual Studio 2010 Problem

Dear all,
I encounter a problem after installed the crystal report version for Visual Studio 2010. Once I call
                       ReportDocument.PrintToPrinter(1,False, 0, 0)
The error message prompt:
Report is unavailable(Index was out of range. Must be non-negative and less than the size of the collection. Parameter name:index)
If I try
                         ReportDocument.PrintToPrinter(1,False, 1, 1)
It can print the 1st page of the report.
I also try to create a simple report. It works.
After installed this version, my reports also encounter the same problem in Visual Studio 2008.
My report has sub-reports. My PC is Windows XP.
Anybody has idea on this issue!?

Now you can set the various printer options using the PrintOutputController. I'm using a UI box to select the printer but your developer should be able to figure this out. If not you can include him in the e-mail, it would be fine to go direct. Of course you will stay in the thread:
     private void btnSetPrinter_Click(object sender, System.EventArgs e)
          System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
            CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
          // Use the next line if you need to, you'll ahve to test. Depends on how the reports were saved.
            //CrystalDecisions.CrystalReports.Engine.PrintOptions.DissociatePageSizeAndPrinterPaperSize = true;
            //CrystalDecisions.ReportAppServer.ReportDefModel.ISCRPrintOptions.DissociatePageSizeAndPrinterPaperSize = true;
            //pDoc.DefaultPageSettings = pgSettings;
            PrintDialog dlg = new PrintDialog();
            dlg.Document = pDoc;
            if (dlg.ShowDialog() == DialogResult.Cancel)
                MessageBox.Show("Cancel Button clicked", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
                return;
            else
                CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions MYPRTOpts = new PrintOptionsClass();
                if (rdoCurrent.Checked)
                    pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
               // the next 3 lines may not be necessary.
                    MYPRTOpts.PrinterName = cboCurrentPrinters.Text;
                    MYPRTOpts.PaperSize = (CrPaperSizeEnum)
                        pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
                    MYPRTOpts.PaperSource = (CrPaperSourceEnum)
                        pDoc.PrinterSettings.PaperSources[cboCurrentPaperTrays.SelectedIndex].Kind;
                    MYPRTOpts.PaperOrientation = CrPaperOrientationEnum.crPaperOrientationLandscape;
                    //MYPRTOpts.PageMargins.Bottom = .1;
                    //MYPRTOpts.PageMargins.Top = .1;
                    //MYPRTOpts.PageMargins.Left = .1;
                    //MYPRTOpts.PageMargins.Right = .1;
                else
                    pDoc.PrinterSettings.PrinterName = cboDefaultPrinters.Text;
                    MYPRTOpts.PrinterName = cboDefaultPrinters.Text;
                    MYPRTOpts.PaperSize = (CrPaperSizeEnum)
                        pDoc.PrinterSettings.PaperSizes[cboDefaultPaperSizes.SelectedIndex].Kind;
                    MYPRTOpts.PaperSource = (CrPaperSourceEnum)
                        pDoc.PrinterSettings.PaperSources[cboDefaultPaperTrays.SelectedIndex].Kind;
                rptClientDoc.PrintOutputController.ModifyPrintOptions(MYPRTOpts);
                //MessageBox.Show("Printer set.", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
                rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
                //MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
Thank you
Don

Problem with "View project-level information" permission when accessing build definition in Visual Studio Online

Hi,
from some time all our team members are experiancing problems when acsessing list of builds on Visual Studio Online or when trying to edit build definition in Visual Studio. Error message suggests problem with missing View project-level information permission:
"TF50309: The following account does not have sufficient permissions to complete the operation: XXXXXXXX. The following permissions are needed to perform this operation: View project-level information."
I've checked permissions of my User account and Group. "View project-level information" is set to Allow on both levels. We didn't make any changes in security configuration recently. Does anyone faced similar problem?
Short term solution was to add all users, to Project Collection Administrators Group, but it is not what we would like to live with.

It seems that the problem was fixed and Project Collection Administrators permissions are no longer required. Great :-)

How do I resolve error 1310 while installing crystal report version for visual studio 2010.

How do I resolve error 1310. I try to install crystal version for visual studio 2010, but I got this error message. Error 1310. Error writing to file. mcf80.dll.verify that you have access to that directory. My pc is window 7 (32 bit). Please I need help
urgently to work with this program in my system successfully. Please help.

Hello Dorohidea,
Do you mean that when you install crystal report in virtual studio 2010, you receive the error message about error 1310?
Please take a look at the following KB.
Support for Crystal Reports for Visual Studio
https://support.microsoft.com/kb/317789/en-us
In Visual Studio 2010, to create a Crystal Reports project or Web site or to import existing projects or Web sites that were created by using older versions of Visual Studio or Crystal Reports, you must first install a version of Crystal Reports that is
compatible with Visual Studio 2010.
For more information about how to use Crystal Reports in Visual Studio 2010, visit the following SAP Crystal Reports website:
http://www.sap.com/crystalreports/vs2010
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Launching VB6 Editor after installing Visual Studio 2013 results in "Please wait while Windows configures Microsoft Visual Studio..."

I have had various versions of Visual Studio installed beside Visual Basic 6.0 Enterprise for some time with no problems, most recently Visual Studio 2012 Premium.
I recently installed Visual Studio 2013 Premium, and now every time I open VB6 I get a dialog that says "Please wait while Windows configures Microsoft Visual Studio Professional 2013" that shows a progress bar. After it finishes (30 seconds or
so), it launches again and again and finally VB6 will open. This happens with each instance of VB6, regardless if I've already done it once and never run VS2013 in between.
If I cancel the dialog, I get this error message in a dialog: "Error 1712. One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible." Several more "Please wait"...
dialogs will appear and if I continue to cancel, eventually I'll get the VB6 editor. It appear to work fine despite the error messages.
It seems to me that the VS2013 installer flagged some dll's or other files to be rolled back whenever starting VB6. It doesn't appear to be necessary, and I'd like to avoid playing the "Please wait" wack-a-cancel-button game before launching each
instance of VB6 (or waiting several minutes for no reason). So how do I fix this?
Note: I've seen something similar happen in Outlook on a different PC when upgrading from 2010 to 2013. The same sort of "Please wait"... dialog would appear each time I opened Outlook. Judging by the "similar" questions that popped up when
entering this forum post, I'd say this is a general problem with upgrading older versions or installing newer versions of major Microsoft software side-by-side.
/* Don Reynolds */

I found the answer!
I was having the exact same issue, and I was search for a solution and I happened across the following thread: http://social.msdn.microsoft.com/Forums/en-US/f4b0fd38-f4f9-41ea-bd8d-834203a175d2/building-visual-studio-2010-project-triggers-please-wait-while-windows-configures-visual-studio?forum=vssetup&prof=required
Scroll a small bit down, and there is a post by Barry Wang explaining that you need to use event viewer to find out what is missing. Anyway, I opened event viewer, then open VS 6, then hit refresh in the event viewer (under Windows Logs -> Application)
and saw a warning message from MsiInstaller. It gave me the following message:
Detection of product '{9C593464-7F2F-37B3-89F8-7E894E3B09EA}', feature 'Visual_Studio_Professional_x86_enu', component '{E3FF99AA-78B9-4A06-8A74-869E9F65E1FE}' failed. The resource 'C:\WINDOWS\Microsoft.NET\Framework\URTInstallPath_GAC\' does
not exist.
I opened an elevated command prompt, I navigated to the C:\WINDOWS\Microsoft.NET\Framework folder and verified that 'URTInstallPath_GAC' didn't exist, and then I did "md URTInstallPath_GAC".
Closed and reopened VS 6, and it instantly opened - no "Please wait" message.
Now this may or may not be the same problem you are having (problem is - I have had it happen on two separate computers now with VS 6 and VS 2013 installed), but it should point you in the right direction. In fact, you should be able to use the Event Viewer
for anytime the "Please wait" message shows up for any application, and then once there find out what is really missing.

Crash call stack caused by crdb_adoplus.dll and crqe.dll on Crystal Report for Visual Studio 2008

Hi There,
i have an application running on C# .NET which use .NET Framework 3.5 SP1 and Crystal Report for Visual Studio 2008 x64. Now i'm facing the issue in application. suddenly my IIS crash , and the application is logout.
i have opened advisory case to Microsoft and they help me to analyze the dump from the application when the issue is happened.
here it is the stack trace :
STACK_TEXT:
00000000`9b1dd160 000007fe`eb93946d : 00000000`9b1dd308 000007fe`eb931948 00000000`00000000 000007fe`eb931610 : verifier!VerifierStopMessage+0x1f0
00000000`9b1dd210 000007fe`eb939736 : 00000000`9b1ddb50 00000000`00000002 00000000`00000040 00000000`00000004 : verifier!AVrfpDphReportCorruptedBlock+0x2a5
00000000`9b1dd2d0 000007fe`eb9399cd : 00000000`b32f1000 00000000`9b1ddb50 00000000`00000004 00000000`00001000 : verifier!AVrfpDphCheckNormalHeapBlock+0xce
00000000`9b1dd340 000007fe`eb93873a : 00000000`9b1ddb50 00000000`01001002 00000000`cca0c3b0 00000000`00000000 : verifier!AVrfpDphNormalHeapFree+0x29
00000000`9b1dd370 00000000`770b99a5 : 00000000`00000000 00000000`00000000 000007fe`f25514f7 000007ff`05f0a1d1 : verifier!AVrfDebugPageHeapFree+0xb6
00000000`9b1dd3d0 00000000`7705dbc0 : 00000000`b32f0000 00000000`cc16afb0 00000000`b32f0000 00000000`cc16afb0 : ntdll!RtlDebugFreeHeap+0x35
00000000`9b1dd430 00000000`7704413d : 00000000`b32f0000 00000000`9968aa01 00000000`00000000 00000000`9b1ddb50 : ntdll!RtlpFreeHeap+0x19a70
00000000`9b1dd770 00000000`76ef307a : 00000000`00000001 00000000`9968aa40 00000000`9b1dd958 00000000`cc16afb0 : ntdll!RtlFreeHeap+0x1a6
00000000`9b1dd7f0 00000000`9739cabc : 00000000`00000000 00000000`9968aa40 00000000`000002a3 00000000`cc13ef28 : kernel32!HeapFree+0xa
00000000`9b1dd820 000007fe`f2550e37 : 00000000`00000000 00000000`24b20fc0 00000000`0000001b 000007ff`0604a340 : msvcr90!free+0x1c
00000000`9b1dd850 000007ff`05f05802 : 00000000`00000000 000007ff`0604f7c0 00000000`9b1dd958 00000000`9968aa40 : mscorwks!DoNDirectCall__PatchGetThreadCall+0x7b
00000000`9b1dd8f0 000007ff`05f0a231 : 000007ff`0604f730 000007ff`05f05802 00000000`cc16afb0 00000000`0000001b : DomainBoundILStubClass.IL_STUB(Void*)+0x42
00000000`9b1dd9b0 000007ff`05f0a1d1 : 00000000`cc16afb0 00000000`000007d4 00000000`9b1dd2e8 00000000`00000000 : crdb_adoplus!<Module>.DbFieldInfo.{dtor}(DbFieldInfo*)+0x11
00000000`9b1dd9e0 000007ff`05f0a177 : 00000000`0000001c 00000000`cc13ef20 00000000`00000000 00000000`00000000 : crdb_adoplus!<Module>.DbFreeFieldList(UInt32, DbFieldInfo**)+0x31
00000000`9b1dda30 000007fe`f254f18a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : DomainBoundILStubClass.IL_STUB(Int32, Int64)+0x7
00000000`9b1dda60 00000000`9a506b36 : 00000000`0000001c 00000000`cc13ef20 00000000`00000000 00000000`00000000 : mscorwks!UMThunkStubAMD64+0x7a
00000000`9b1ddaf0 00000000`9a583538 : 00000000`bf35af90 00000000`bf9bcfa0 00000000`9b1ddd30 00000000`00000000 : crqe+0x16b36
00000000`9b1ddca0 00000000`9a6c1c64 : 00000000`bec28dc0 00000000`cd926e60 00000000`00000000 00000000`cbafcf20 : crqe+0x93538
00000000`9b1ddf90 00000000`9a6bc697 : 00000000`cd926e60 00000000`00000000 00000000`00000000 00000000`00000000 : crqe+0x1d1c64
00000000`9b1de000 00000000`b64fcab9 : 00000000`cd926ec0 00000000`9b1de0c0 00000000`00000000 00000000`b6dee2cb : crqe+0x1cc697
The crdb_adoplus tried free a corrupted Heap Block:
0:188> dt DPH_BLOCK_INFORMATION 000000009b1ddb50-40
verifier!DPH_BLOCK_INFORMATION
   +0x000 StartStamp : 0
   +0x004 PaddingStart     : 0
   +0x008 Heap             : 0x00000000`9b1ddb58 Void
   +0x010 RequestedSize    : 0x9b1ddb50
   +0x018 ActualSize       : 0x9b1ddb30
   +0x020 Internal         : _DPH_BLOCK_INTERNAL_INFORMATION
   +0x030 StackTrace       : 0x00000000`00000001 Void
   +0x038 PaddingEnd       : 0
   +0x03c EndStamp         : 0
is this problem solved by upgrading Crystal Report version to CR12 ?
Thank you,
Best Regards,
Leonardus Tono Amboro
IT Enterprise System Architect
PT Astra International Tbk.
AMDI A Building, 7th Fl.
Jln. Gaya Motor Raya 8. Sunter II, Jakarta 14330, Indonesia
Message was edited by: Ludek Uher
Phone number removed - Please see the SCN Rules of Engagement

Hi Leonardus
Please define "crash". What actually happens?
Did this ever work? E.g.; this started to happen recently?
Is this happening on your development system or QA or production?
See if enabling the option "Verify on 1st Refresh" will help.
Make sure you are using SP 1: Crystal Reports for VS 2005 and VS 2008 Updates & Runtime Downloads
Ensure that the dataset is less that a couple thousand rows. Anything more than that will cause issues...
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter

Exeception while building index for viewController Project

Hi,
When i work with the viewController project, i have this message in the window Messages-log :
Aug 18, 2010 1:43:54 PM oracle.ideimpl.index.IndexRoot run
SEVERE: Exception while building index for C:\JDeveloper\Easy\EasyPilot\Trunk\EPILOTV2\ViewController\public_html
java.lang.ArrayIndexOutOfBoundsException: -2
*     at oracle.ideimpl.index.IndexRoot.mergeData(IndexRoot.java:773)*
*     at oracle.ideimpl.index.IndexRoot.saveIndex(IndexRoot.java:726)*
*     at oracle.ideimpl.index.IndexRoot.run(IndexRoot.java:610)*
*     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)*
*     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)*
*     at java.util.concurrent.FutureTask.run(FutureTask.java:138)*
*     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)*
*     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)*
*     at java.lang.Thread.run(Thread.java:619)*
which causes Jdeveloper to ask me to exit from Jdeveloper.
What happens ? What i have to do to correct the problem cause it seems dangerous.
Thanks for any help,
David

Sorry,
i have not precised that i work with Jdev 11.1.1.1.0 studio edeition version
hope it will help
David

Crystal Reports for Visual Studio 2008 - dbf

Hello,
I use both Visual Studio 2005 and 2008 on same PC. I can not work with dbf files (format foxpro2x, dbase IV) in VS 2005 and VS 2008.
Q1. Work Crystal Reports for Visual Studio 2008 with database files - dbf (version foxpro2x, dbaseIV)? I get error -
Crystal Reports ActiveX Designer
Failed to load database information
or with dbf files work only Full version of Crystal Reports?
Q2. How re-install Crystal Reports for Visual Studio 2008. In setup Add/Remove features not exist Crystal Reports check box. I only Repair/reinstall all Visual Studio but after reinstall same error
Crystal Reports ActiveX Designer
Failed to load database information
3. When I can open sample project with Crystal Reports which use Crystal Reports (dbf file) this error is displayed:
Crystal Report Viever
Failed to load database information
Details: The database DLL "crdb_p2bxbse.dlll" could not be loaded.
4. I reinstal Crystal Report in Visual Studio 2005 - same error
5. I apply hotfix Crystal Reports for .NET 2005 - SP 1 - same error
Thank You
Ludek

Hi Ludek,
1-For dbase file to work you need have permission on database files for IIS as well as user accessing the database.
2-For re-install you need to insert the CD of visual studio setup then do custom install and then try to choose crystal reports for re-installing
3-The old viewer might cause the problem. In this case can you try connecting to a blank dbase file.
and for such issues we have a special forum [here|SAP Crystal Reports, version for Visual Studio;
Thanks,
Hitesh Mangtani

Microsoft Office Developer Tools for Visual Studio 2013 on Windows 10 Technical Preview

Hi, I've never developed a plugin for Office before. I've downloaded the technical preview of Windows 10 and have it running via Boot Camp on my MacBook (Looks good! I'll buy it when it comes out). Obviously with this being in beta it's understandable that
there are problems, so this is just a heads up on one particular problem. Maybe there's already a solution or workaround?
I've downloaded Visual Studio 2013 Community Edition, brought a copy of Microsoft Office Home And Student 2013 and am currently in the process of installing Microsoft Office Developer Tools for Visual Studio 2013.
The only problem though is that when I try to install it I get the following message:
http://s22.postimg.org/dxh1gtra9/Install_Problem_Office_Plugin_Tools.png
Here is the log:
http://pastebin.com/7wWkSfjF
I also tried to download the file directly and run that.
http://s3.postimg.org/tj9vb660j/Install_Problem_Office_Plugin_Tools2.png
I right clicked on the file and noticed an options called "Troubleshoot Compatibility". There was a wizard, and I ran through the wizard a number of times through different routes but none of them worked. I was unable to find the option which turned
off compatibility mode. I then searched for answers online which told me to do some things in the regedit program but that didn't seem to solve the problem.
Anyway, I understand that this is a beta version of Windows 10 and that there are going to be problems but thought it would be best to let you know. Perhaps I should just bite the bullet and buy Windows 8.
Many thanks,
Lawrence

Hi RealByReel,
Thanks for sharing the solution back.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error 8 File permission error while building executable for a RT

I got error 8 File permission error while building executable for a RT. It happened always after build, I mean new startup.rtexe and startup.alias files have been created. At the build properties, it was set use default .alias file.
I had the executable built successfully at one time.
The detail message is:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 8 occurred at Open/Create/Replace File in RTBEP_Generate_Deploy_Instructions.vi->RTBEP_Invoke_Build_Engine.vi->RTBUIP_Build_Invoke.vi->RTBUIP_Build_Rule_Editor.vi->RTBUIP_Open_Properties.vi->RTBUIP_Item_OnDoProperties.vi->RTBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
I checked relevant posts, couldn't find any clue.
Please give me some ideas.
Thanks.

Hi Ya-hoo,
Error building application in LabView 8.0 seems to describe a similar situation. The .alias file is important, as described in that discussion forum.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |

An error in Crystal Reports Basic for Visual Studio 2008

Greetings from Peru,
We have a problem with one of the Crystal Reports products weu2019d like you to help us with. We work with Crystal Reports Basic for Visual Studio 2008.
The error weu2019ve detected is in one of our systemu2019s reports; this report shows data inside frames. When the content to show is larger (in height) than the space left in the page, the container object of the report makes a line break keeping the title and the frame empty at the end of that page, but the information is shown in the next page. What we need is that not empty frame is displayed.
Weu2019ve tried to solve this problem by adjusting the report in different ways (by programming coding), but unfortunately this problem is related to how much data is displayed, because if this data fit in the space left in the page, the line break would not occurs and the data is shown at the end of the same page.
We hope you can help us with this issue. I look forward to your comments.

All I can think of is trying CR 2008 (v.12.x). You can obtain an eval copy from here:
http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Plug in for visual studio 6.0 in acrobat sdk 6.0

Dear Friends,
I am absolutely in to the pdf plug in work. Can any one please help me, to know that how to install the plug in for visual studio 6.0.
I have installed acrobat sdk 6.0 , acrobat professional and visual studio 6.0 in my system.
Please suggest me whether I have to download any other tool for this.
Regards,
Safee

My problem has resolved... still thank you...
I just follwed
You must install the wizard manually. Simply copy the AcrobatPluginWiz.awx and
AcrobatPluginWiz.hlp files from PluginSupport\Tools\Visual Studio App Wizard
subdirectory of the Acrobat 6.0 SDK installation to the Common\MSDev98\Template\
subdirectory of the Visual Studio 6.0 installation. The default path to copy from is
C:\Program Files\Adobe\Acrobat 6.0 SDK\PluginSupport\Tools\Visual Studio App Wizard
and the default path to copy to is C:\Program Files\Microsoft Visual
Studio\Common\MSDev98\Template.
Once the files are copied, the Acrobat 6.0 Plugin Wizard option will now be available in the
File > New > Projects dialog.

XQilla problem while building dbxml for Visual Studio 6

Similar Messages

Maybe you are looking for