XSQL and MS Access

I am attempting to connect to an Access database using XSQL. I believe I have everything set correctly.
<connection name="test">
     <username>test</username>
     <password>test</password>
     <dburl>jdbc:odbc:mytest
</dburl>
               <driver>sun.jdbc.odbc.JdbcOdbcDriver</driver>
     <autocommit>true</autocommit>
</connection>
<xsql:query connection="protech" xmlns:xsql="urn:oracle-xsql">
SELECT * FROM tblTest
</xsql:query>
However, I get a resulting,
<<Oracle XSQL Servlet Page Processor 1.0.4.3 (Production)
<<XSQL-007: Cannot acquire a database connection to <<process page.
<<[Microsoft][ODBC Driver Manager] Data source name not <<found and no default driver specified
The message is a little confusing because it says there is no dataset with that name and there is not driver. I know there is an odbc-connection setup on the machine with the name "mytest". As for the driver. Do I need to set it in my classpath somewhere? If so where? In Catalina.bat?

Kevin,
Assuming I have an ODBC datasource on my local machine called ecdcmusic, the following works for me:
<connection name="test-access">
<username>admin</username>
<password></password>
<dburl>jdbc:odbc:ecdcmusic</dburl>
<driver>sun.jdbc.odbc.JdbcOdbcDriver</driver>
<autocommit>true</autocommit>
</connection>
Good Luck,
Charlie

Similar Messages

Firefox is using large amounts of CPU time and disk access, and I need to know how to shut down most of this so I can actually use the browser.

Firefox is a very busy piece of software. It's using large amounts of CPU time and disk access. It puts my usage at low priority, so I have to wait for some time to be able to use my pointer or keyboard. I don't know what it uses all that CPU and disk access time for, but it's of no use to me. It often takes off with massive use of resources when I'm not doing anything, and I may not have use of my pointer for several minutes. How can I shut down most of this so I can use the browser to get my work done. I just want to use the web site access part of the software, and drop all the extra. I don't want Firefox to be able to recover after a crash. I just want to browse with a minimum of interference from Firefox. I would think that this is the most commonly asked question.

Firefox consumes a lot of CPU resources
* https://support.mozilla.com/en-US/kb/Firefox%20consumes%20a%20lot%20of%20CPU%20resources
High memory usage
* https://support.mozilla.com/en-US/kb/High%20memory%20usage
Check and tell if its working.

How to find out list of users and their access on Sharepoint

Hello Everyone
How can i find out list of users and what access they have on SharePoint site? I want to create table with list of the users and their access?
Thanks

you can get the report using below powershell scripts. first one gives list of users in a site collection level.
The second link generates the permissions reports for each user.
http://techtrainingnotes.blogspot.com/2010/12/sharepoint-powershell-script-to-list.html
https://sp2010userperm.codeplex.com/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

I lived in the US for a few years, spent a fortune on iTunes [my then local Apple ID account]. Now I live in South Africa and want to use Match. I have a local credit card but how do I use my new / 2nd Apple ID and gain access to all my US music??

I lived in the US for a few years, spent a fortune on iTunes [my then local Apple ID account]. Now I live in South Africa and want to use Match. I have a local credit card but how do I use my new / 2nd Apple ID and gain access to all my US music??

You have to be in a country to use its store - you will need to be in the US and have a US billing address on your account to be able to use the US store (that applies to buying and redownloading).
You can use iTunes Match in South Africa, do you not have a backup copy of all of your US iTunes purchases so that you can subscribe to it and upload those that aren't in the South African store to it ?

Cannot login to Cisco Jabber 10.5.1 over Mobile and Remote Access

Hi,
We have deployed sucessfully VCS Expressway-C and VCS Expressway-E with only 1 zone which is "Unified Communication Traversal" and is for Mobile and Remote Access only. VCS-C and VCS-E are communicating and in statuses everything is active and working. Also VCS-C can communicate with CUCM and CUP (both version 10.5).
Problem is when I deploy Cisco Jabber 10.5.1 on computer outside of LAN and without VPN it start communicating with VCS-E, ask me for accepting certificate (we have certificate only intenally generated on Windows CA) and after that it is trying to connect and after few seconds it will tell me that it can't communicate with server.
Did any of you had same problem or can you advice how to troubleshoot? In Jabber logs there is only something like "Cannot authenticate" error message, but when I startup VPN I can authenticate without any problems.
Thanks

On Expressway-C are your HTTP Allow Lists setup properly? By default, and auto discovered CUCM and IMP should be listed via IP and Hostname, but if not, you'll need to insert manually.
Also, you can look at the config file your Expressway-E would be handing out to Jabber via this method.
From the internet, browse to:
https://vcse.yourdomain.com:8443/Y29sbGFiLmNvbQ/get_edge_config?service_name=_cisco-uds&service_name=_cuplogin
Where:
vcse is your Expressway-E hostname (or CNAME/A record)
yourdomain.com is your own domain
The first directory is your Base64 encoded domain name, remove and trailing equal signs (=)
The XML returned is basically the DNS SRV record information available as if internal for _cisco-uds and _cuplogin
TFTP DNS SRV is optional if you configured TFTP in IMP for your Legacy Clients.

Vpn site to site and remote access , access lists

Hi all, we run remote access and site to site vpn on my asa, my question is Can I create an access list for the site to site tunnel, but still leave the remote access vpn to bypass the access list via the sysopt command, or if I turn this off will it affect both site to site and remote access vpn ?

If you turn off sysopt conn permit-vpn it will apply to both your site to site and remote access vpn...all ipsec traffic. You would have to use a vpn-filter for the site to site tunnel if you wanted to leave the sysopt in there.

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro? Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?

Can I use the new Time Capsule to backup my mid 2010 Macbook Pro?
Yes, if you are asking about using Time Machine to backup the Mac.
Also can I want to free up my hard disk, can I save my photos and files on the time capsule and later access through wifi?
You are not thinking of deleting the photos and files on your Mac, are you? If you do this, you will have no backups for those files.
Another concern is that Time Machine backs up the changes on your Mac. At some point, Time Machine will automatically delete the photos and files from the Time Capsule.....you just don't know when this might occur.
In other words, only delete files from your Mac that you can afford to lose.

Setting Opportunity Access and Contact Access to null in Account Team

Hi,
We can set the the Opportunity Access and Contact Access to blank/null manually in the application but is it possible to set these to blank using import?
Thanks,
Teena

Hi,
Thanks for the reply. We have tried updating a record through Account Team > Import > Overwrite Existing Records where the Contact Access and Opportunity Access fields were blank. The import was successfull but the fields were not updated, they are still set to Full access. We used the Account EUID in the import file.
Regards,
Teena

How to configure oracle and ms-access db

Hi All,
I have a requirement to push data from the oracle to ms access. My oracle database is on the Unix server and ms access is on my local desktop. Is there a way to configure if so how to configure both the db? Basically I am wanted to make the ms access visible to oracle so that I can use the Heterogeneous package. Please let me know if there are any different ways.
my oracle version is
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
ms-access 2007
Thanks in advance.

Hi,
You could use the Database Gateway for ODBC (DG4ODBC) to do this. It uses a third party ODBC driver to make the connection to MS-Access so the best option would be to install it on the Windows machine where Access is running and use the Microsoft Access driver.
Otherwise, you could install on Unix where Oracle is running but I don't think there is third party Access driver for Unix.
The following note available in My Oracle Support describes the setup on Windows -
Note.466225.1 How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit
You should install the latest 11.2 DG4ODBC and this note has pointers to the download sites -
Note.1083703.1 Master Note for Oracle Gateway Products
DG4ODBC can be installed standalone without an RDBMS being installed.
Regards,
Mike

How to set up full access and limited access wireless networks to laptops

Dear Apple,
I just received my Apple 1 TB Time Capsule. Can someone please help me with a network configuration I want to set up?
I have a cable modem, and, three computers: a G4 iMAC (system 10.5.5), an Apple MacBook (system 10.5.5), and, a PC laptop.
The Time Capsule is connect directly to the cable modem.
Regarding the computers:
(1) I want the G4 iMAC to connect directly, via an Ethernet cable, to the Time Capsule, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature, and, with allowed access to my HP inkjet printer (class 6110);
(2) I also want the MacBook laptop to wirelessly link to the Time Capsule via the Airport utility on the laptop, and, WITH FULL ALLOWED ACCESS to the Time Capsule and to the back-up function of the Time Machine feature (using WPA/WPA2 security, and, without the network name visible to third parties), and, WITH allowed access to my HP inkjet printer (class 6110);
(3) I want the PC laptop to wirelessly link to the Time Capsule (using WEP security), but WITHOUT ACCESS to the Time Machine, WITHOUT access to the back-ups on the iMAC, WITHOUT access to the back-ups on the MacBook, and, WITHOUT access to the inkjet printer --- I only want the PC to use the Time Capsule as a WIRELESS ROUTER so that the PC laptop can access the internet.
(4) And, finally, I want to specify (Time-Capsule/Time-Machine/server ) access ONLY to the iMAC and the MacBook, so that others cannot gain any access.
I specifically need help to set up and configure the Time Capsule so that the PC laptop, as stated above, should have limited access to the Time Capsule --- namely, only to access the internet, and, not even be aware of stored data on the Time Capsule, not even be aware of the inkjet printer, and, not even see my WPA network name when the PC scans for wireless devices.
I also want the iMAC and the MacBook to have access to each other’s data stored on the Time Capsule (like a common server).
I have an old D-Link DI-624 wireless router that I used before buying the Time Capsule, which is available, if needed. Hopefully, I can configure the Time Capsule so that I would not need the old D-Link.
Thank you in advance,
David.

The basic method for remote access is not changed.
http://gigaom.com/apple/access-your-time-capsule-over-the-internet/
You have a few issues.
The really big one.. the school firewall should not let you connect to home.
Check the IT admin at your school but if they allow anything but a few protocols like http and https through, they are not doing their job. You cannot afford in a large network to have every Tom Dick and Harry access any open device.. that can introduce viruses and trojans into the network behind the firewall.
The general method for remote access on large networks is vpn and the TC offers no vpn connection.. just AFP.
If you intend using 3G wireless stick or the like then you can get access.
The next issue is static public IP or how to find the TC.. you need some way to find the IP if your ISP does not offer static ip, and the tc has no dyndns client. Since Apple shut down new users for mobileme and will close that service there is no method to find the TC IP without owning your own domain. You would be better placing the TC in bridge behind a router that does offer dyndns and port forward AFP (TCP 548) to it.

HT1923 I have a Vista Operating system with 2 users. Somehow I got two different play lists each with one user. One is too big for the storage and has a vast amount of duplicates. Can I delete the one that is twice as large and then access the other li

I have a Vista operating system with 2 users. Somehow I got two diffent libraries for the users. How can I delete the one and then access the correct library on the other users profile?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Simultaneously Connecting Multiple Tables of the same Database to Textboxes of the same Form using a single ADO Control Code using VB6 Enterprise Edition and MS Access 2007

Iv 10 Tables consisting of atleast 10 fields each in a single Database. Bt, Im only able to connect 1 table at a time to a form using an ADO Control. Im able to add data from table 'student' to text-boxes in my form. Bt, hw can I add data from field(0) of
Table 'Student' to Textbox1 and data from field(0) of Table 'Marks' to Textbox2 using VB6??
This is the current sample coding iv got to connect a single table to a form:
Global con As New ADODB.Connection
Global rs As New ADODB.Recordset
Public Function Connect()
If con.State = 1 Then con.Close
con.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + App.Path + "\bca.mdb;Persist Security Info=False"
End Function
Private Sub Add_Click()
If rs.State = 1 Then rs.Close
rs.Open "select * from student", con, adOpenDynamic, adLockOptimistic
rs.AddNew
rs.Fields(0) = (Text1.Text)
rs.Fields(1) = (Text2.Text)
rs.Fields(2) = (Text13.Text)
rs.Fields(3) = (Text4.Text)
rs.Fields(4) = (Text5.Text)
rs.Fields(5) = (Text6.Text)
rs.Fields(6) = (Text7.Text)
rs.Fields(7) = (Text8.Text)
rs.Fields(8) = (Text9.Text)
rs.Fields(9) = (Text10.Text)
rs.Fields(10) = (Text11.Text)
rs.Update
MsgBox " Record Added"
End Sub
What can I do to add fields from 2 different tables to different text boxes within the same form using a single ado control using vb6 and MS Access 2007??

Hi,
Since VB6 product is not supported in this forum, you may go to these forums for support:
#Where to post your VB 6 questions
http://social.msdn.microsoft.com/Forums/en-US/6a0719fe-14af-47f7-9f51-a8ea2b9c8d6b/where-to-post-your-vb-6-questions
Thank you for your understanding.
Best regards,
Franklin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My Mac Book hard drive is nearly full. How do I move iTunes music, etc folders to a different location on an external hard drive and still access as if on my Mac?

My Mac Book hard drive is nearly full. How do I move iTunes music, etc folders to a different location on an external hard drive and still access as if on my Mac?

http://support.apple.com/kb/HT1449

HT1527 I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

I have windows 8.1 and cannot access itunes store even creating a new apple id. With other users on the same computer I can access itunes store. How can I solve this?

i had the same problem before using a fresh install of Windows 8.1. I have resolved this issue by running the program compatibility wizard. This I did by right-clicking on the iTunes icon in the desktop, selecting Troubleshoot compatibility, waited for it to detect compatibility issues and when presented with the following options: 1.) Try recommended settings; 2.) Troubleshoot program, I chose the latter. When asked what problems I noticed, I checked the following: "The program worked in earlier versions of Windows but won't install or run" and "The program requires additional permission"
After that, it tired to resolve the issue, and provided the necessary settings to run iTunes. Now it's running flawlessly. I have Avast anti-virus installed though.
HTH!

I still have 5 Gb icloud storage but 2.1 gb on iphone I want to upgrade to 6.0 but need 2.6 gb on my phone can i use icloud to free up some space and still access the apps that I store there on my iphone

i still have 5 Gb icloud storage but 2.1 gb on iphone I want to upgrade to 6.0 but need 2.6 gb on my phone can i use icloud to free up some space and still access the apps that I store there on my iphone.

No.
You need to delete content from your iphone.

XSQL and MS Access

Similar Messages

Maybe you are looking for