Xview library and Solaris 8

Does anyone know if xview library is included in Solaris 8 package? Thanks.

Yes, it's still included with solaris 8 (both headers files
and libraries).
There's an EOL note in the release notes that the next
solaris version (solaris 9) may not contain xview any more.

Similar Messages

Problem adding IBMtape and TS3200 fibre library to solaris 10 sunfire 280R

Hi,
I have IBM TS3200 Fibre library and I’m having problems to connect it to my solaris 10 (and TSM) there is nothing in under /dev/rmt ??
Information:
SunOS tsm 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-280R
HBA Model          : QLA2310
Driver Version     : qlc-20080514-2.28
FCode Version     : 1.14.09
Firmware Version     : 3.03.27 IP
There are 2 drivers and one changer and bout are seen by hardware:
cfgadm -o show_FCP_dev -al
Ap_Id      Type Receptacle Occupant Condition
c3           fc-fabric connected configured unknown
c3::2002000e11116daf,0         tape         connected    configured   unknown
c3::2002000e11116daf,1         med-changer connected    configured   unknown
c3::2008000e11116daf,0         tape         connected    configured   unknown
c3::500601603a201211,0 disk connected configured unknown
c3::500601603a201211,1 disk connected configured unknown
c4           fc-private connected configured unknown
c4::210000203784c0ff,0 disk connected configured unknown
c4::210000203784dff0,0 disk connected configured unknown
I have installed the IBMtape as in IBM documentation is instructed.
All commended out in st.conf, mt.conf and lb.conf.
st driver is not loadet. (rem_drv st)
there is in /devices entrys like this: (du -a /devices)
2 /devices/pci@8,700000/SUNW,qlc@2/fp@0,0/sgen@w2002000e11116daf,1
0 /devices/pci@8,700000/SUNW,qlc@2/fp@0,0/sgen@w2002000e11116daf,1:changer
What is sgen@??
So the hardware sees the library but the os dos not compute… any idea how to get the drivers working and something under /dev/rmt?

You could experiment with giving OBP the absolute path to that USB device, but I doubt you'll be successful. The Sunfire 280R (same hardware as the Sunblade 1000, Sunblade 2000, and Netra 20) design expected USB to be only for keyboard and mouse, not for any storage devices. If booting ever works manually from a USB stick, then you could create a custom alias for the device.
Try an experiment by using a CD or DVD of an older release of Solaris 10 instead of the current release.
[http://www.sun.com/software/solaris/releases.jsp|http://www.sun.com/software/solaris/releases.jsp]
The earlier ones need fewer hardware resources. I also recall a few forum posts that seem to suggest the bootblock structure on the CD's and DVD's of those earlier releases was more compatible with older hardware.
You might also need to get yourself a copy of the OBP 4.x Command Reference Manual, document No. 816-1177
[http://dlc.sun.com/pdf/816-1177-10/816-1177-10.pdf|http://dlc.sun.com/pdf/816-1177-10/816-1177-10.pdf]

Can I convert Linux library to Solaris?

Im sun user. using SUN FIRE V1280.
I got free crypto library compiled on Linux. Im using solaris sparc.
I couldn't run this code, due to different archeticture.
How to convert this library to solaris sparc, so that i can run it.
the library file extention is ".a"
Thanks in advance

You cannot convert a binary created for an x86 platform for use on a SPARC platform.
See if you cant get a Solaris/SPARC version of the binary. If not, maybe you can get the source code and build it yourself.

Building 64bit shared library on Solaris 10

I'm trying to port a Java application that depends on BerkeleyDB from GNU/Linux to Solaris 10. The GNU/Linux version was just recently rebuilt against Sun Java 6. The 64bit version of the JVM for the AMD Opteron processor. It produced a 64bit shared library. All is well in GNU/Linux land.
I try building BerkeleyDB on Solaris following the instructions in the documentation and it produces a 32bit shared library. So when the application starts up and tells the JVM to run in 64bit server mode it complains it cannot load a 32bit shared library. So my question is how do I force the build system to build a 64bit shared library in Solaris 10?
I'm using the Sun Studio 11 compiler for building BDB. I'm also doing this on a T1000 so any T1000 specific flags would be appreciated.

Hi,
I am not familiar with your particular environment. The general method for building a 64 bit Berkeley DB library on Solaris is to pass the "-xarch=v9a" flag to the configure command.
I hope this helps.
- Alex Gorrod

Hp library and tape tools

Anyone, HP Library and Tape Tool shows under the download as supporting Solaris 10. Solaris 10 is ancient so can you say if the current version supports Solaris 11? Thank,
Laz

Hi:
You may also want to copy and paste your post to the HP Business Support Forum -- Tape Libraries and Drives section.
http://h30499.www3.hp.com/t5/Tape-Libraries-and-Drives/bd-p/itrc-198#.U4-FIv1OXGg

Qt QMake is missing - Solaris 11 and Solaris Studio 12.3

OS: Oracle Solaris 11 - http://www.oracle.com/technetwork/server-storage/solaris11/overview/index.html
Development tools: Solaris Studio 12.3 - http://www.oracle.com/technetwork/server-storage/solarisstudio/overview/index.html
Hi, I want to make Qt desktop applications for Oracle Solaris 11, and Solaris Studio supports Qt projects. However the binary QMake is missing.
Is it available somewhere?
Thank you a lot.
Edited by: 909513 on Jan 22, 2012 6:05 PM
Edited by: 909513 on Jan 22, 2012 6:06 PM

Here's what I used to compile up (I think) 90%+ of Qt 4.8.4. The configure step creates qmake and the compile rolls along until it hits a lot of non standard C++ code. But you get qmake out of it. The tarball is the latest snapshot of the 4.8.x git tree.
Caveat: It's being built using Sun Studio 12.3 and the stdcxx library from my package site, along with a bunch of dependant packages from there. I never got Qt 4.8.4 to finish compiling with webkit, the 3rdparty/javascriptcore/JavaScriptCore/* files are truly awful non compliant code and error out every step of the compile. Sigh.
Good luck
================================================================================
qt 4.8.2013.06.24
    https://qt.gitorious.org/qt/qt/trees/4.8
    Compile stdcxx 4.2.1    Done
    Compile dbus 1.7.2      Done
    Compile libmng 1.0.10   Skipped
    setenv CC "cc"
    setenv CXX "CC"
or
    setenv CC "cc -xtarget=ultra -m64 -xcode=pic32"
    setenv CXX "CC -xtarget=ultra -m64 -xcode=pic32"
    setenv LDFLAGS "-L/usr/local/lib -mt -library=no%Cstd -L/usr/local/lib -lstdcxx4"
    setenv CFLAGS "-I/usr/local/include -DUSE_SYSTEM_MALLOC"
    setenv CXXFLAGS "-I/usr/local/include -mt -library=no%Cstd -L/usr/local/lib -lstdcxx4 -DUSE_SYSTEM_MALLOC"
    setenv LINK "${CXX} -I/usr/local/include -mt -library=no%Cstd -L/usr/local/lib -lstdcxx4"
    setenv AR "${CXX} -I/usr/local/include -mt -library=no%Cstd -L/usr/local/lib -lstdcxx4 -xar -o"
    setenv CC "${CC} ${CFLAGS}"
    setenv CXX "${CXX} ${CXXFLAGS}"
    cd /var/tmp
    rm -rf qt-qt
    gunzip -c /usr/local/src/graphics/qt-4.8.2013.06.24.tar.gz | gtar -xvf -
    cd qt-qt
    /bin/perl -pe 's#/bin/sh#/bin/bash#'                              -i configure
    /bin/perl -pe 's#OPT_CONFIRM_LICENSE=no#OPT_CONFIRM_LICENSE=yes#' -i configure
    /bin/perl -pe 's#^QMAKE_INCDIR\s+=.*#QMAKE_INCDIR=/usr/local/include#'         -i mkspecs/solaris-cc/qmake.conf
    /bin/perl -pe 's#^QMAKE_LIBDIR\s+=.*#QMAKE_LIBDIR=/usr/local/lib#'             -i mkspecs/solaris-cc/qmake.conf
    /bin/perl -pe 's#^QMAKE_INCDIR_X11\s+=.*#QMAKE_INCDIR_X11=/usr/local/include#' -i mkspecs/solaris-cc/qmake.conf
    /bin/perl -pe 's#^QMAKE_LIBDIR_X11\s+=.*#QMAKE_LIBDIR_X11=/usr/local/lib#'     -i mkspecs/solaris-cc/qmake.conf
    /bin/perl -pe "s#^QMAKE_CC\s+=.*#QMAKE_CC=${CC}#"                              -i mkspecs/solaris-cc/qmake.conf
    /bin/perl -pe "s#^QMAKE_CXX\s+=.*#QMAKE_CXX=${CXX}#"                           -i mkspecs/solaris-cc/qmake.conf
    /bin/perl -pe "s#^QMAKE_LINK\s+=.*#QMAKE_LINK=${LINK}#"                        -i mkspecs/solaris-cc/qmake.conf
    /bin/perl -pe "s#^QMAKE_LINK_SHLIB\s+=.*#QMAKE_LINK_SHLIB=${LINK}#"            -i mkspecs/solaris-cc/qmake.conf
    /bin/perl -pe "s#^QMAKE_AR\s+=.*#QMAKE_AR=${AR} #"                             -i mkspecs/solaris-cc/qmake.conf
    /bin/perl -pe 's#canBuildWebKit=\"no\"#canBuildWebKit=\"yes\"#'                -i configure
    /bin/perl -pe 's#canBuildQtConcurrent=\"no\"#canBuildQtConcurrent=\"yes\"#'    -i configure
./configure -prefix /usr/local \
-qpa xcb \
-release \
-opensource \
-shared \
-no-fast \
-largefile \
-no-system-proxies \
-exceptions \
-accessibility \
-stl \
-qt-sql-sqlite \
-system-sqlite \
-no-qt3support \
-xmlpatterns \
-multimedia \
-audio-backend \
-no-phonon \
-phonon-backend \
-svg \
-webkit \
-x11 \
-no-javascript-jit \
-script \
-no-scripttools \
-declarative \
-platform solaris-cc \
-no-mmx \
-no-3dnow \
-no-sse \
-no-sse2 \
-no-sse3 \
-no-sse4.1 \
-no-sse4.2 \
-no-avx \
-no-neon \
-system-zlib \
-system-libtiff \
-system-libpng \
-no-libmng \
-system-libjpeg \
-openssl \
-nomake tests \
-R /usr/local/lib \
-I /usr/local/include \
-L /usr/local/lib \
-verbose \
-no-cups \
-iconv \
-no-gtkstyle \
-no-nas-sound \
-sm \
-xshape \
-no-xvideo \
-xsync \
-xinerama \
-xcursor \
-xfixes \
-no-xrandr \
-xrender \
-mitshm \
-fontconfig \
-no-xinput \
-xkb \
-no-glib \
-confirm-license \
-system-freetype
    foreach file (3rdparty/javascriptcore/JavaScriptCore/runtime/* 3rdparty/javascriptcore/JavaScriptCore/runtime/* 3rdparty/javascriptcore/JavaScriptCore/API/*)
        perl -pe 's#ENABLE$GLIB_SUPPORT$#0#' -i $file
        perl -pe 's#OS$DARWIN$#0#' -i $file
        perl -pe 's#OS$WINCE$#0#' -i $file
        perl -pe 's#OS$WINDOWS$#0#' -i $file
        perl -pe 's#OS$SYMBIAN$#0#' -i $file
        perl -pe 's#OS$OPENBSD$#0#' -i $file
        perl -pe 's#OS$QNX$#0#' -i $file
        perl -pe 's#OS$ANDROID$#0#' -i $file
        perl -pe 's#OS$RVCT$#0#' -i $file
        perl -pe 's#OS$FREEBSD$#0#' -i $file
        perl -pe 's#OS$HAIKU$#0#' -i $file
        perl -pe 's#OS$NETBSD$#0#' -i $file
        perl -pe 's#OS$MAC_OS_X$#0#' -i $file
        perl -pe 's#OS$IOS$#0#' -i $file
        perl -pe 's#OS$AIX$#0#' -i $file
        perl -pe 's#OS$LINUX$#0#' -i $file
        perl -pe 's#OS$UNIX$#1#' -i $file
        perl -pe 's#OS$SOLARIS$#1#' -i $file
        perl -pe 's#PLATFORM$BREWMP$#0#' -i $file
        perl -pe 's#PLATFORM$MAC$#0#' -i $file
        perl -pe 's#PLATFORM$WIN$#0#' -i $file
        perl -pe 's#PLATFORM$CHROMIUM$#0#' -i $file
        perl -pe 's#PLATFORM$WX$#0#' -i $file
        perl -pe 's#PLATFORM$GTK$#0#' -i $file
        perl -pe 's#COMPILER$MSVC$#0#' -i $file
        perl -pe 's#COMPILER$MINGW$#0#' -i $file
        perl -pe 's#COMPILER$GCC$#0#' -i $file
    end
    perl -pe '($. == 28) && s/^/#include "DateConversion.h"\n#include "DateInstance.h"/' -i 3rdparty/javascriptcore/JavaScriptCore/runtime/DateInstanceCache.h
    foreach file (3rdparty/javascriptcore/JavaScriptCore/runtime/*)
        perl -pe 's#JS_EXPORTDATA#__declspec(dllexport)#' -i $file
    end
    gmake
If you get this far you'll hit the dodgy code, but you'll have a qmake binary made. You can remove the -webkit option and it'll actually build qt I believe, but alas I need webkit
ta,
Mark

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Delete file from iTunes Library and Computer

I convert a lot of my own TV shows for playback on iPad/iPod touch. Once I have watched the show I delete it from my library.
It used to be that when I deleted from my library, I would get a message asking if I wanted to delete from library only or from library AND computer. It does not ask me this anymore.
I went into preferences and clicked on "reset all warnings" but that didn't fix the problem. Any tips on how to restore this functionality?

What I mean is I don't want an extra copy of the file made when I add something to my library. I already have the file where I want it.
I did try your suggestion, and just as I suspected, it made an extra copy in a different location on my computer, then when I deleted it, yes, it asked me if I wanted to move it to the recycle bin, but it only deleted the copy, not the original.
I'm marking your response as helpful, as I can use it as a workaround if I can't find a better solution, but I have never done it this way before. I've always had full control over which folders my shows were in, and only one copy. And when I've deleted, it has deleted the original file, not just a copy of it.

I accidentally erased a music album that I purchased on iTunes. How can I get the iTunes store to recognize that it is no longer in my iTunes library and download it again?

I accidentally erased a music album that I purchased on iTunes. How can I get the iTunes store to recognize that it is no longer in my iTunes library and download it again?

Delete the broken links in iTunes then look at your purchased list to redownload.
If this happened because you were deleting files from the iTunes folder in Finder, don't. You have to let iTunes do all the deleting and moving or you will end up with broken links.

Is there a way to make a smart "playlist" of specific books in my iTunes library, and copy ONLY THOSE books to an iOS device? I own an iPad and an iPhone but I want different books on different devices.

Is there a way to make a smart "playlist" of specific books in my iTunes library, and copy ONLY THOSE books to an iOS device? I own an iPad and an iPhone but I want different books on each different device. When I've tried this, the iOS devices don't seem to respond.

There is no playlist for iBooks, butther eis nothing to preent you from choosing to download specific titles from itunes, or syncing just specific titles to an individual device.

In previous versions of i Tunes you could highlight a song in your library and there would be a genious list on the right side of the screen showing songs like the one highlighted in the library. Now I do not get that list. Is there a way to get this back

In previous versions of i Tunes I could highlight a song in my library and a genious list would show on the right side of the screen listing songs that were like the one highlighted. Now I do not get that list. Is there a way to get that back?

Hi again Bob,
I believe I've found the feature you were speaking about now. Information on the "In the Store" feature of iTunes can be found here:
Apple - iTunes - Inside iTunes - Using In the Store from within your iTunes Library.
http://www.apple.com/itunes/inside-itunes/2013/01/using-in-the-store-from-within -your-itunes-library.html
Thanks for using the Apple Support Communities. Have a good one!
-Braden

How to restore library and iPod from external flash drive

I had trouble getting my iPod to load new music after I got a new PC. I reinstalled iTunes and the new music loaded but the old music in my library and iPod were deleted. How do I transfer my music from my flash drive back to my library and iPod classic?

did you ever find the answer to this question? I have the same problem

How to Restore Library and Playlists to Newly Wiped Hard Drive

Due to Windows problem, I had to reformat my hard drive.
Before I did, I copied the entire My Documents folder, including My Music and the iTunes music files and the My Playlist text files to a second hard drive - the D drive - in the same tree structure as they existed on the C drive.
I do NOT want the music files on the C: Drive - I want the music files on the new D: storage drive. I want iTunes on the C drive but knowing the music files are on the D drive.
I installed the iPod disc onto the newly cleaned C: Drive and downloaded iTunes ver 6.
Now I would like to have my iTunes library and playlists back just as they were but I am confused over the ADD FILE and ADD FOLDER commands.
Add Folder appears to copy the full music files back to the C Drive, which I do not want.
Add File appears to add the meta data, the library list, and
the playlists to iTunes, but when you go to play a track, the program says it cannot do so because it can't find the music file. To tell each track the new location of the music file listed means I would have to edit over 1200 line items -- even though I already told the program where the
music files would be.
Before trying to add the library and playlists as files, I went into EDIT, Prefences, Advanced and changed the iTunes folder location from
c:\mydocuments\mymusic\itunes\itunesmusic to
D:\mydocuments\mymusic\itunes\itunesmusic
Earlier I had used the Add Folder option and it copied all the music files to the C: drive. I had to delete them and
try something else.
What must I do to transfer just the meta data and keep the actual music files on the D drive?
Dell 8250 desktop Windows XP

The XML file is less important (See the link that Katrina provided above).
First re-install the iTunes program (if you have not already).
Make sure that the music folders and files are copied to the exact same location they were in prior to the PC Restore. If they were running on the C: drive, you'll need to place them there at first, then move them within iTunes.
Then copy the original ITL file you saved into the 'iTunes' folder, replacing the newly created (and smaller) ITL file that was created when you reinstalled iTunes.
Open iTunes and the Library should be as it was prior to the Restore.
To move the files to your D: drive keeping iTunes 'informed' see this link:
http://discussions.apple.com/click.jspa?searchID=721335&messageID=1316838
Post back if you still have questions.

How do I share iTunes Library and Playlists

I had a desktop mac with 2 login accounts, we enjoy having our own spaces, mail, desktops, prefs, etc.. but we do not wish to duplicate nor keep either one out of our digital assests, ie music, photos, etc..
I used to have an alias to the other users itunes library and all was fine. He is the predominant music purchaser in the house and I have full access to even his latest purchases.
Upon buying a new machine, 1.66GHz duo core mini we seem to have lost this ability. If I make an alias now, when I launch itunes it says cannot find the folder itunes, it seems to now know its a folder it must find and not an alias to one. I have read ideas about sharing and fast user switching, not really the solution I am looking for or used to have. I think many couples find themselves in a similar situation. Seems silly that we now have to be logged in one side to play/stream music in the house and make sure we are logged into the other side whenever we connect the digital camera.
Any ideas would be appreciated.
Chrallan
1.66GHz Intel Core Duo Mini Mac OS X (10.4.7)

Does this help?:
iTunes: How to share music between different accounts on a single computer

How to read excel file in document library and store excel content in sql table

Hello,
Can anyone help me how to read the excel file present in document library and store the content inside excel into sql table?
Please let me know the ways to acheive this. Feel free to give your suggestions.
Thanks,
Cool Developer

Hi!
this code i have written becuase i donot find any soltions on net for this , u can try with this . :)
System.Data.OleDb.
OleDbConnection ExcelConnection = null;
FileMode fileMode;
string filePath = ConfigurationManager.AppSettings["TempLoaction"] + "\\" + fileName;
using (SPSite _site = new SPSite(SPContext.Current.Web.Url))
using (SPWeb _web = _site.OpenWeb())
string docLibrary = ConfigurationManager.AppSettings["DocumentLibrary"];
SPFile _file = _web.GetFile("/" + docLibrary + "/" + fileName);
fileMode =
FileMode.Create;
byte[] byteArray = _file.OpenBinary();
MemoryStream dataStream = new MemoryStream(byteArray);
Stream stream = dataStream;
using (FileStream fs = File.Open(filePath, fileMode))
byte[] buffer = new byte[4096];
int bytesRead;
while ((bytesRead = stream.Read(buffer, 0, buffer.Length)) != 0)
fs.Write(buffer, 0, bytesRead);
fs.Close();
//Create the Connection String
try
string ConnectionString = @"Provider=Microsoft.Jet.OLEDB.4.0;
Data Source ='"
+ filePath + "'; Extended Properties=Excel 5.0";
//Create the connection
ExcelConnection =
new System.Data.OleDb.OleDbConnection(ConnectionString);
//create a string for the query
string ExcelQuery;
//Sheet1 is the sheet name
//create the query:
//read columns from the Excel file
ExcelQuery =
"Select * from [Sheet1$]"; // from Sheet1";
//use "Select * ... " to select the entire sheet
//create the command
System.Data.OleDb.
OleDbCommand ExcelCommand = new System.Data.OleDb.OleDbCommand(ExcelQuery, ExcelConnection);
//Open the connection
ExcelConnection.Open();
//Create a reader
System.Data.OleDb.
OleDbDataReader ExcelReader;
ExcelReader = ExcelCommand.ExecuteReader();
//For each row after the first
while (ExcelReader.Read())
thanks,
kshitij

Xview library and Solaris 8

Similar Messages

Maybe you are looking for