Xy graph in PDA module does not plot points or update

The XY Graph for PDA does not plot points or update. Input data is simple cluster of floating point data (x,y)in while structure. The axes scale properly with Configure PDA XY Scales.vi. Cursor legend also OK. Checked line and point attributes-OK. Running 7.0F1 and pocketPC2003. Please help.

Garret,
Can you attach the VI so that we can see it? If you think it is a bug in the toolkit, rather than a programing thing I would suggest sending an e-mail to NI. In addition are you using eVT 3 or 4 or both?

Similar Messages

[bumblebee] Failed to load module "nouveau" (module does not exist, 0)

Hello my friends,
bumblebee does not work for me. I installed bumblebee, nvidia, nvidia-utils, mesa-libgl, bbswitch-dkms ...
# lspci
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:04.0 Signal processing controller: Intel Corporation 3rd Gen Core Processor Thermal Subsystem (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
00:1f.6 Signal processing controller: Intel Corporation 7 Series/C210 Series Chipset Family Thermal Management Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1)
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24)
nVidia 620M at PCIBus 01.00.0
First, nvidia is disabled by bbswitch.
# cat /proc/acpi/bbswitch
0000:01:00.0 OFF
Then I execute the command
# optirun -vv glxspheres
[ 505.314018] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 505.315297] [DEBUG]optirun version 3.2.1 starting...
[ 505.315938] [DEBUG]Active configuration:
[ 505.316203] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 505.316421] [DEBUG] X display: :8
[ 505.316552] [DEBUG] LD_LIBRARY_PATH:
[ 505.316674] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 505.316788] [DEBUG] Accel/display bridge: auto
[ 505.316900] [DEBUG] VGL Compression: proxy
[ 505.317014] [DEBUG] VGLrun extra options:
[ 505.317126] [DEBUG] Primus LD Path: /usr/lib/primus:/usr/lib32/primus
[ 505.317295] [DEBUG]Using auto-detected bridge virtualgl
[ 506.597122] [INFO]Response: No - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597316] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 506.597448] [DEBUG]Socket closed.
[ 506.597538] [ERROR]Aborting because fallback start is disabled.
[ 506.597654] [DEBUG]Killing all remaining processes.
Now, the nvidia is enabled.
# cat /proc/acpi/bbswitch
0000:01:00.0 ON
# modprobe nvidia
modprobe: FATAL: Module nvidia not found.
/etc/bumblebee/bumblebee.config
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
/etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BusID "PCI:01:00:0"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
What is wrong? Thanks so much for help!

Just did a downgrade and it's working again, here are my versions.
linux 3.9.9-1
linux-headers 3.9.9-1
nvidia 319.32-2
nvidia-utils 319.32-1
bbswitch 0.7-4
If you have conflicts, I found it easiest to remove those (bbswitch, virtualbox in my case), downgrade linux and then install the appropriate bbs/vb packages

Function module does not exist in ECC 6.0

Hi All,
These two below function module does not exist in ECC 6.0 but exist in 4.6.Could you please let me know replacement of these two's.
FI_DOCUMENT_ARCH_READ_SINGLE
CHECK_IBAN_ACTIVE
Thanks
Mohit

Hi,
Thanks for your reply.Could you please give me example that how to use it.
Thanks
Mohit

Error in ERM: Function module does not exist

Hi all,
Lately, we are experiencing a frequent error in ERM (5.3 SP 15.0) that we had not had before. We are unsure what caused the error. The message displayed to the user is "Unhandled error". The log error message is "Message Code is 651 Messsage Details Function module does not exist Message Type is E" (see full logs below).
The error occurs for example, when users are trying to generate derived roles after saving the org values for the derived role during the methodology process, or when administrators are trying to update the impacted derived roles after for org value mappings.
Has anyone experienced this or someting similar before? Any ideas what could be the reason here?
Thanks!
Patrick
Edited by: Patrick Weyers on Sep 15, 2011 9:36 AM

Log extract:
2011-09-15 09:05:15,103 [SAPEngine_Application_Thread[impl:3]_18] ERROR Message Code is 651 Messsage Details Function module does not exist Message Type is E
java.lang.Throwable: Message Code is 651 Messsage Details Function module does not exist Message Type is E
     at com.virsa.re.service.sap.dao.ManageAuthDataDAO.getAuthorizationData(ManageAuthDataDAO.java:1064)
     at com.virsa.re.bo.impl.AuthorizationDataBO.getNewTransactionObjects(AuthorizationDataBO.java:821)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.addObjsForNewTxns(AuthAuthorizationDataAction.java:3527)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.reloadTransactions(AuthAuthorizationDataAction.java:4128)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.execute(AuthAuthorizationDataAction.java:157)
     at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:286)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
2011-09-15 09:05:15,105 [SAPEngine_Application_Thread[impl:3]_18] ERROR com.virsa.re.role.actions.AuthAuthorizationDataAction
java.lang.Throwable: java.lang.NullPointerException
     at com.virsa.re.service.sap.dao.ManageAuthDataDAO.getAuthorizationData(ManageAuthDataDAO.java:1084)
     at com.virsa.re.bo.impl.AuthorizationDataBO.getNewTransactionObjects(AuthorizationDataBO.java:821)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.addObjsForNewTxns(AuthAuthorizationDataAction.java:3527)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.reloadTransactions(AuthAuthorizationDataAction.java:4128)
     at com.virsa.re.role.actions.AuthAuthorizationDataAction.execute(AuthAuthorizationDataAction.java:157)
     at com.virsa.framework.NavigationEngine.execute(NavigationEngine.java:273)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:230)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.framework.servlet.VFrameworkServlet.service(VFrameworkServlet.java:286)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.virsa.comp.history.filter.HistoryFilter.doFilter(HistoryFilter.java:43)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:219)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

FP TC 120 module does not work

I have a FP-TC-120 module connected to a FP-1600 Ethernet module. But the software FieldPoint Explorer seems not to recognize it. It recognizes my FP-1600 module, and a FP-AI-110 module also connected. The FP-TC-120 power LED keeps flashing frequently, and the Ready LED does not light. What can be happening? I have tried everything, but it does not work at all.

Actually, technically, the FP-TC-120 module does not have a STATUS LED. Network modules have STATUS LED's that will flash a number of times, pause, and flash again but I/O modules do not. All I/O modules have Power and Ready LED's and some I/O modules have additional LED's.
The FP-TC-120 has an LED on each channel to indicated Open Thermocouple detection. In an I/O module, a Power LED that is failing to turn on wil typically signify that one or more components in the system is damaged. The most typical example would be bent pins between the terminal bases or between the I/O module and the terminal base. Alternatively, some forms of damage to the I/O module could also conceivably cause this sort of failure mode. In any case, once the faulty component
is isolated (terminal base or module), it will probably need to be sent to National Instruments for repair.
Regards,
Aaron

XI datasources function modules does not exist after BW upgrade to 7.3

We have recently upgraded our dev BI system to 7.3
During our testing phase we found that we are unable to load data coming from XI system.
When we checked the functional modules of the XI(web services)
datasources we found that the function modules does not exist in the system.
Eg : For our GECARS datasource we have 2 funcitonal modules
1. /BIO/QI6AZXH_ZIFIGECARS
2. /BIO/QI6AZXH_ZIFIGECARS_RFC (delta function module)
we have activated resp datasource and found that code for
/BIO/QI6AZXH_ZIFIGECARS exist now but we are facing issues with RFC
funciton modules (/BIO/QI6AZXH_ZIFIGECARS_RFC )
To put it in simple terms we are facing issues with Dev BI since upgradeto 7.3 with respect to RFC and non-availability of function modules.
Kindly help us in resolving this.
Thanks,
Kiran

Hello Kiran,
Have you found the reason for the non existence of the FM in the system after the upgrade?
Have you found any alternative? I hope you would have created an OSS message, if so whats the response have you got?
Kindly let me know as I am experiencing similar issue where one of the FM (RSDRC_MULTIPROV_GET_MAPPING) does not exist in BI system after the upgrade.
Regards,
Vinoth V

I get unexpectedly logged out from my mail box and and recieve the following message: "The custom error module does not recognize this error."

I am repeatedly and unexpectedly logged-out from my mail box when working on a document. It frequently happens when I choose Send or Save, but it could happen any time. The file that I worked on disappears completely. Before, the file could be found in the draft box or some other place categorized as Auto Recovery. Now, instead, I get the following message: "The custom error module does not recognize this error." I am working at home, connected to a university server. The same problem appears with both of my computers, which are connected by a router. I have a MacBook Pro and am working with Firefox 6.0.2. I have a wireless broadband connection with Internet. AirPort is connected to Lindstrom and has IP address 192.168.0.198. Router: D-Link Model DIR-635. Modem: ZyXEL Model No. 660H D Triple Play Modem.
Best wishes,
Lars Lindström, Professor
<[email protected]>

Hi Phil,
Generally, when a user sends an incoming request to an Exchange 2010 Client Access server using Outlook Web App and the user’s mailbox is on an Exchange 2010 mailbox in a different Active Directory site,
Exchange 2010 determines whether the Client Access server has the
ExternalURL property set in that Active Directory site. If it is and the cross-site silent redirection has been enabled, the user will be automatically redirected to the specified URL.
Thus, please make sure the External URL property is set properly in your environment. And also
disable the WindowsAuthentication for OWA VD to have a try. If the issue persists, please try the following KB to reset the Outlook Web Access-related virtual directories:
http://support.microsoft.com/kb/941201
Thanks,
Winnie Liang
TechNet Community Support
Sorry for the late reply. Yes, the ExternalURL is set; otherwise, it wouldn't work at all. 98% of the time everything is fine.
My issue described a problem that appears only during session timeouts. I've pretty much verified that this is the case; Exchange 2010 does not appropriately handle the timeouts sometimes when using cross-site redirection.

Unable to create rule Error:Function Module does not meet the workflow conv

Hi Workflow experts,
Could any one help me with rule creation. Below is my Function Module Interface.
""Local Interface:
*" TABLES
*"      AC_CONTAINER STRUCTURE SWCONT OPTIONAL
*"      ACTOR_TAB STRUCTURE SWHACTOR OPTIONAL
*" EXCEPTIONS
*"      NOBODY_FOUND
The function module test is successful with all required conventions for workflow but while i try to create a rule with the funtion module i get the error "Function Module does not meet the workflow conventions"
I Also have included the following in FM
INCLUDE <cntn01>.
Any suggestions would be helpful. Thanks in Advance,
Imran

Hi,
I am not sure whether the rule accepts the optional flag. Remove the optional flag for the tables parameters and try again. According to the documentation you have implemented the right interface. It might be the issue with the tables parameter being optional.
Hope this helps,
Sudhi

HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

How do i update 10.5.8 if my macbook does not show any software updates?

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

HT2693 My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back. Can I get the update out somehow? Thanks

My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks

"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

HT4890 Photo Stream does not seem to be updating on my PC. What should I do?

Photo Stream does not seem to be updating on my PC. What should I do?

Try signing out and back in to the iCloud control panel.

I am trying to update my iphone 3GS software but itunes just says that this is the current version of itunes, it does not see the phone update - anyone know how to get the phone updated?

I am trying to update my iphone 3GS software but itunes just says that this is the current version of itunes, it does not see the phone update - anyone know how to get the phone updated?

Mike
I have done that and it is through pressing that update, which tells me that there is anew version of iphone software, that the prompt comes telling me that this is the current itunes?

HT4972 My general settings menu does not have a software update option- how do I update? Thanks

Hi,
I am really struggling to update my iphone software. I believe that I am currently on version 4.2.1 and would like to update yet my general settings menu does not offer a software update option.
What would be the best steps to take?
Any help would be great.
Thanks
T

Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

HT4623 My iPad 2 was does not have a software update option under settings? I bought it on ebay, is there a way to get it on there?

My iPad 2 does not have a Softwarw Update options under the settings menu...any way I can get it on there?

Update to IOS 5 or higher
http://support.apple.com/kb/HT4972

HT4589 Automatic Update does not give me an update from FCP X 10.0 to FCP X 10.0.5. How do I update? I have version 10.0.0.

I have never received an update from my original FCP X 10.0. I recently upgrade to Mountain Lion, purchase additional plugins and FCP X cannot use them unless I upgrade to atleast FCP X 10.0.3. Automatic Update does not give me an update for FCP X. Version 10.0.5 does not show on the Apple Support Download page. I purchased Compressor at the same time and it has given an update. How do I down find the download? Any suggestion would be appreciated.

And if it does not come automatically, move your Final Cut.app out of the Applications folder, open App Store, click Purchaces, and Install it from there - it will download the latest 10.0.5 version.
If FICPX is not listed there, it's because you bought it with another AppleID!

Xy graph in PDA module does not plot points or update

Similar Messages

Maybe you are looking for