XY graph "mouse move" event stops generating when click on cursor

Hello All
When the mouse is moving freelly inside the XY graph control, the "mouse movement" event is fired.
The same happens when muse clicks anywhere in the graph with the exception of cursors.
hen mouse clicks on cursors the "mouse move" event is NOT generated even though the mouse is phisically moved.
Is there any explanation to this.
I enclose the example.
regards
Pawel

Just today I had the same problem -> my solution:
set event timeOut to some value(I have it at 1ms) then
add to globalVariables some BOOL variable that will signal if mouse is down or up (set the flag in appropriate event),
then add a case in the timeOut event which will read this
global variable(flag) -> if it's TRUE then change the needed parameter.
So even if the mouse move event isn't fired the main timeout event is.
Not a perfect solution, but better than nothing.
Peace
Waldemar

Similar Messages

Mouse move event when mouse out of stage.

Hi
I'm wondering how is this task done that listen to mouse move event when user cursor is out of stage?

Hi, kennethkawamoto2
I've tried in this way: use "stage.mouseX, stage.mouseY" these two values when cursor is out of stage, and it worked quite well till now,
If you mind discribe the issue that you've metion that " Flash does not report mouse location correctly beyond stage.." more in detail, I think I should avoid this. Thank you very much!

Image control mouse move event updates

I would like to drag the ROI around in the Image control (holding down the left mouse button) and continually read out the ROI coordinates. I can't find a way to do this: the mouse move event does not seem to fire if I hold the left mouse button down. I assumed that I would have
1. Mouse down when I click and hold.
2. Mouse move when I move the ROI around.
3. Mouse up when I release the left mouse button.
This does not seem to be the case.
I've done a simple workaround which is
1. Use the key up event to check that the space bar has been pressed.
2. Use this to toggle a "lock" boolean which locks the target to the mouse coordinates.
3. Use the mouse move event to return the Image Control Mouse Coordinates property.
4. Unlcok the target from the mouse coordinates by pressing the space bar again.
This kind of works, but it is much less intuitive than the standard windows "click and drag".
Any comments appreciated.
Thanks.
PS The Image Control is excellent, it has saved me lots of development time. Also, the ROI tools are hugely useful.

If you filter the mouse down event (MOUSE DOWN?) then the coordinated are always returned on mouse move event weather the mouse is down or not. I did get the coordinates when the left button was down anyway it was just when the right button was down which the move event was not handled (due to the popup menu consuming the event first?) I thing there is a good way to do this with dynamic event registration, and NI has a similar example of drag and drop of controls, but I am not at my LV machine to look for it right now. If I am wrong I am sorry it is early and my coffee is not brewed yet.
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

Dynamically register "mouse move" event for a VI

Just as in the example ”Dynamically Register for Events.vi” I want to dynamically register a “Mouse Move” event. I use the “Open VI Reference” to get the reference to the VI and I connect it to the “Register For Events” block just as in the example. When I click the block I get a list of events to choose from, but the “mouse move” event is not one of them. How do I select this event?
I have got the program running by copying the “Register For Events” block from the example and into my program, but I’m interested to know how this should have been done.
I use LabView 8.0

I've had the same problem in LV 8.2.1 and 8.5. I found that NI changed how to access the mouse move... it's now available under "Pane." See my attached example, a modified NI Example.
Derek
Attachments:
Dynamically Register for Events - 8X.vi ‏44 KB

How to execute a method on mouse move event on an Image

Hi All,
I want to execute a method on mouse move event or mouse click event to an image.
how can i achieve this?
TIA,
Vishal

I am not sure if commandImageLink or goImageLink solve your requirement.
But as a workaround you can use set of ClientListener and ServerListener with af:image to achieve what you need.
using then you can capture client event and convert that into server event which you can use to call a bean method.
Inside this bean you can call a web service or method binding.
My first link in previous post shows that very well....
OR
http://naive-amseth.blogspot.com/2011/02/calling-methodbindingwebservice-on.html
Amit
Edited by: amseth on Feb 15, 2011 12:25 AM

Mimicking mouse move event

Hi,
I'm using flex through a plugin, and not though a browser (like most people do). For some strange reason my flex SWF doesn't receives mouse move events. I can get the mouse move events in the application that contains the SWF, and I can tell the SWF that the events has occured, using the externalInterface API.
Once I received a call that indicates a new mouse position, I want to mimick it as a normal mouse move event. Any ideas on a simple way to do this?
thanks in advance,
Vince

If you have the stage coordinates of the mouse, you can get pretty far by calling getObjectsUnderPoint and dispatching a MouseEvent from the last element in the array (converting the stage coordinates to local).
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui

My macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?

my macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Graph Mouse Down event issue

I have an XY graph that is controlled by a mouse down event. When I use the any of the tools like zoom I zoom into an area with a cluster of plots when I go to click on a plot the plot selects but the graph then reinitialises back to its original state. The VIs I'm using are attached
Paul Power
I have not lost my mind, it's backed up on a disk somewhere
Attachments:
XY graph - closest point.vi ‏24 KB
scatter plot.vi ‏27 KB

Yes, all the tools I'm using are from the graph palette. Say if I have 100 points on my graph and I use the graph palette zoom to zoom into an area of points on the graph I select a specific point with the mouse then the graph goes back to its unzoomed state showing the full plot
Paul Power
I have not lost my mind, it's backed up on a disk somewhere

Movie keeps stopping after 45 clicks

Hi,
My flash movie keeps stopping after I've clicked 45 times and
I've no idea why. There are lots of buttons on the page and when
you click them they count how many times the buttons has been
clicked and display this in a dynamic text box underneath the
button. Not very exciting I know, but very useful at school. When
I've clicked one button 45 times or a combination of buttons adding
up to 45 the movie goes white (my buttons disappear). I'm quite new
to flash so sorry if this is really basic.
Thanks,
Zoro

Thanks for replying kglad.
I've just realised what the problem is! I've only got 45
frames on my timeline and the code includes nextFrame so when it
gets to the end it doesn't know what to do. Dhurrr! I can sort that
out. Sorry to have troubled you.
Best wishes,
Zoro

How to address error iTunes has stopped working when clicking on Get Info to edit song information?

How to address fix "iTunes has stopped working error" when clicking on Get Info to edit song information?
When I try to edit song information in iTunes, I right-click on the song and click on Get Info...the message iTunes has stopped working and needs to close message will appear followed by iTunes has stopped working: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available...I have tried uninstalling iTunes and deleting all its components or files on my pc and reinstalling...I have done this more than a "hundred" times but to no avail...Now I could not consolidate my Library, add important info on the songs, etc...I have searched forums including here but none from the suggestions worked.
I'm on Windows 7 54bit.
Please help!

Thanks! i finished to run Check your iPod with Diagnostics Mode. here is results:
Retract:15
Reallocs: 0
Pending Sectors:0
Poweron Hours:556
Start/Stop:5071
Right now, i am runing Check iPod hard-drive for errors and will let you know if it gets ipod fixed or not

Why does my mouse move, then stop, then catch up again?

As I move my mouse, it will suddenly stop and then catch up again.
I'm on 10.7.4 mac mini 2.3gb with 8gb ram, anda second monitor attached to the thundrbolt port.

Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts? Click on the Disk Usage tab, how much free space?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

BUG mouse move event on stage in fullscreen

Hi everybody,
I have a video player witch can use fullscreen mod, when user click on fullscreen button, player switch in this mod, so, when user move his mouse on stage, playerControls appear.
My problem :
on Windows : in enterFullscreen event handler, i listen MOUSE_MOVE event on stage, the problem is that the MOUSE_MOVE is fire, even if the user doesn't move mouse, mouse coordinate change, yes, but i think mouse_move event should be not fire...
the problem not appear on Mac.
Sorry for my bad english.
stage.addEventListener(FullScreenEvent.FULL_SCREEN, onEnterFullscreen);
public function onEnterFullscreen(e:FullScreenEvent):void {
stage.addEventListener(MouseEvent.MOUSE_MOVE,moveHandler);
public function moveHandler(e:MouseEvent):void {
Thanks in advance for your help

Could you please open a new bug report on this over at bugbase.adobe.com? When adding the bug, please include sample code or an application so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the URL so that others affected can add their comments and votes.

External Mouse and Keyboard Stop Working When X220 is Docked and Screen is Closed

I have an X220 with a docking station, external monitor and external keyboard/mouse. When I start the laptop from a cold boot and it's docked, my external mouse and keyboard work fine with the screen open or closed.
If I undock and redock with the screen closed, the external keyboard doesn't work and the mouse cursor moves, but the mouse buttons don't do anything. If I open the screen, then the keyboard and mouse work fine.
I've swapped the keyboard and mouse and still have the same problem, so it's not the kb/mouse. This is a brand new X220 and the issue has been occurring since it was purchased.
Any thoughts?

hey mhambalek,
hard to say what's going on, though i would recommend heading to http://support.lenovo.com , do a full update of your unit.
also, if the external keyboard & mouse & monitotor is connected to your unit without the docking station, does the same thing happen?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Usb mouse lag or stops intermittently when I switch on an usb fan

Hi
thats what happen even changing usb port
Thanks for your help

emeres wrote:
There is a hardware limit of 0,5 A for the high powered state for USB2.0 ports. Check the specification on usb.org.
EEWeb article wrote:USB specifications limit the device current to 100mA prior to enumeration. After enumeration, a high-powered device can request no more than 500mA.
I suspect the fan has been designed to work at safe current levels when already in motion. Is the fan listed by 'lsusb' when attached? If no, there is little you can do on the software side.
However there are at least two possibilities on the hardware side, both potentially destructive and with side effects, yet relatively simple to implement. Since there seems to be a little problem with communication, I will refrain from naming those however.
How does the hub behave when you connect the fan when already in motion? Is the timeout for the mouse shorter or not present at all?
Edit: Wrong link.
Is the fan listed by 'lsusb' when attached?: No
How does the hub behave when you connect the fan when already in motion? Is the timeout for the mouse shorter or not present at all?: When I switch off the fan, mouse works perfect.

What kind of event is generate when start in cell?

Hi!
I set JTextField as a cell editor.Let's in cell we have some string, e.g: "test". When I double click in cell and start type, e.g. "12", the methods of KeyListener (keyPressed and so on) are calls and the result string is "test12". OK.
But when I only select cell (the caret is not blink in cell) and start type, e.g "12" the result is again "test12", but the methods of KeyListener DO NOT CALLS. Why? And how I can get additional symbols which I type (in this case this is a "12") in cell?
Thank you.

Hi,
sorry, I can't find the classes TableScrollPane and JdbTable in the JDK - but, I guess, JdbTable is perhaps a subclass of JTable. If that is so, it will have a TableColumnModel, which you can get by use of its getColumnModel()-method.
You are now able to add a ColumnModelListener to that model by use of its method addColumnModelListener(...). Here you pass a reference to an instance of a class, that implements the TableColumnModelListener interface. Via this interface you will get the folliowing notifications:
public void columnAdded(TableColumnModelEvent e)
Tells listeners that a column was added to the model.
public void columnMarginChanged(ChangeEvent e)
Tells listeners that a column was moved due to a margin change.
public void columnMoved(TableColumnModelEvent e)
Tells listeners that a column was repositioned.
public void columnRemoved(TableColumnModelEvent e)
Tells listeners that a column was removed from the model.
public void columnSelectionChanged(ListSelectionEvent e)
Tells listeners that the selection model of the TableColumnModel changed.
If your JdbTable is a subclass of JTable you can use that way, because the used reference to the TableColumnModel is a reference to an interface, so this is independent of the class, that is actually used to represent this model - only interface methods are used.
greetings Marsian

XY graph "mouse move" event stops generating when click on cursor

Similar Messages

Maybe you are looking for