Y scales of graph appear at wrong/different places

I have a single graph that displays multiple plots. The user dynamically chooses which 2 of the 8 plots are displayed at a time. The Y axis scale for each plot is different. When I change the Y axis scale for the different plots and then run the program the Y scale gets shifted away from the graph. I've tried to change the Y scale graphically and programtically but either way has not worked. HELP! I am attaching the VIs and sub VIs. (The graph property nodes and all things relating to the graph are in the right WHILE loop)
Attachments:
skeletonv4.17.4-error.vi ‏199 KB
formula.vi ‏42 KB
8_channel_splitter.vi ‏56 KB

Hey Shea,
Thanks! but...
The purpose for having a left and a right control for all the plots is to be able to display any 2 plots (with their Y scales) at a time (so that they can be compared). Also the Y scales should be adjacent to the plot area. If you run your edited version you will see that for the first plot the Y scale is adjacent but for all subsequent plots the Y scale moves away from the plot area. It moves away from the plot area for no apparent reason! i really need to solve this problem..please help!
thanks once again
Attached is a file that is very nearly what I want (I.e. all the Y scales are adjacent to the plot area and thus easy to read). However when I change the multiplier for any of the Y scales they move away
from the plot area. I hope I am making sense!
rvleadmal
programmer in distress
Attachments:
skeletonv4.17.4.vi ‏213 KB
formula.vi ‏42 KB
8_channel_splitter.vi ‏56 KB

Similar Messages

I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different p

I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different place than where it is on frame 2. Confused!

Hi Melissa - thanks for your interest. Here's the first frame, the second frame and the tween frame. I don't understand why the tween is changing the position of the object in frame 2, was expecting it to just fade from one frame to the next.

Programmatically add multiple scales to graph

On the front panel, I can choose "duplicate scale" "delete scale" to add/remove multiple scales a Graph control. Can I do this programmatically,i.e., use the VI to adjust the number of scales on the graph? The purpose is to have variable number of plots on the same graph, each having a different scale.

I use this: Add the maximum number of needed scales per hand. You can swap sides to get a better look.
To switch on/off a scale use the property "Active Y Scale" to select the scale and "yscale.visible" to switch on/off.
I've written a small demo. I hope it's usefull.
Attachments:
add_multiple_scales_to_graph.vi ‏24 KB

Is it possible to change the scale of graph in webi ?

Hi All,
How to change the scale of graph in the web intelligence report.
Thanks in advance,
Ravi

1. Set intervals on Y-axis values of the Webi report Charts from the Webi Chart Properties
2. Set the Interval of 500 with Y-axis value range 0 2000,such that the value should look like,0,500,1000,1500,2000
Reproducing the Issue
1. Create a Webi report from e-fashion with objects Year and Sales Revenue.
2. Run the Webi report>Turn to Column Chart.
3. Go to Chart properties>Y Axis>Scale
4.Here there are 2 options.
5. Min value, Max value however the major unit option is not available like one we have in Crystal Reports and Deski
Environment Details:
1. BOXIR2, BOXI3.0
Cause
This is a limitation in Webi report.
Resolution
Enhancement_Request ADAPT01202508 for this issue has been raised however there is no specific timeline as of now defined about which major release this feature will be included in.
Regards,
Sarbhjeet Kaur

Photos keep appearing the wrong way round in slideshow!

Photos which I imported from my old macbook (running 10.4) onto my new imac (10.5.8) keep appearing the wrong way round or stretched out when I play them as part of a slideshow even though in the library they appear fine. Can anyone tell me how to fix this please?
Thanks

Yes the plist file is important, but next time you start iPhoto it will create a brand new one.
This file records various user settings - like the background colour, for instance. If you trash it then when iPhoto re-creates it it simply returns things to the factory default settings.
Trashing the plist file is troubleshooting 101.
Also don't understand what you mean by "If you've moved your library you'll need to point iPhoto at it again"
By default, your iPhoto Library lives in your Pictures Folder. That's where iPhoto looks for it. If you've moved the Library - and I'm guessing you haven't - then you need to tell iphoto where you moved it to. Why? Because that's a setting recorded in the plist file.
Regards
TD

Video appearing in a different location

Hello everyone,
I'm somewhat new to Dreamweaver and just completed a website with embedded QuickTime videos. All the pages look identical except for one in which the video appears in a different location on the web, than it does in Dreamweaver and the browser preview. The code for each page layout is identical. Any help resolving this would be appreciated.

Post a URL to the page please. The answer is in your code.
HTML Validator - http://validator.w3.org
CSS Validator - http://jigsaw.w3.org/css-validator/
Video Streaming Tutorials http://www.mediacollege.com/video/streaming/
Nancy O.

Indesign CC menus appearing at wrong place

Installed Indesign cc. everything works fine, except for the pull-out menus in the tool palette.
I have a dual monitor setup, using windows 8, and when I click (the little triangle) and hold to pull up extra tools... they appear on my other monitor or in the middle of my first monitor.
Didn't have this problem in indesign CS6.
You can view an example here:
http://artattack.be/temp/screenshot.jpg
any ideas how to fix this?

the problem stays the same (with docked or floating toolbar).
if I maximize indesign to my 2 monitors...the palette appears on the second monitor.
if i 'scale' the indesign window to monitor 1 it appears in the middle of the first monitor.
if I disable the second monitor, it appears at the correct place.
also tried Photoshop CC, but it's not a problem there.

Rating scale does not appear in Pre-defined Performance Mgmt Wizard

Hi Experts,
I am implementing SAP Pre-defined Performance template.
When configuring IMG entry u201CDefine Templates for Performance Managementu201D I run the wizard for Performance, and when I get to the rating the only options that are presented are SAP standard delivered values e.g. Standard Quality Scale 1-5, Standard Quality Scale 0-10, Standard Quality Scale 1-3, Standard Quality Scale 1-3.
Now I have previously configured rating scale Team Performance with rating values
1-below expectations
2-meets expectations
3-exceeds expectations
However, this rating scale does not appear in the dropdown list to select from.
Please can someone explain what could be missing or if they had this issue before and were able to solve this.
Many thanks
Oliver

Hi joker_of_the_deck
thank you for your quick response. Much appreciated.
I checked transaction OOHAP_BASIC and my scale is already valid within the Value List.
There are many other scales in our system within this value list but only the entries I mentioned previously are available in the Pre-defined performance wizard.
Do you have any other suggestions on why the system would not allow my scale rating to be selected from the pre-defined performance template as part of the wizard setup?
Regards
Oliver

When using the rectangle tool in CS5, a graph appears in the shape. How do I turn the graph off?

When using the rectangle tool in CS5, a graph appears in the shape. How do I turn the graph off?
Thanks!

It might be the pixel grid if your zoomed in greater than something like 500% to 700%.
Go under View>Show and uncheck Pixel Grid.
Or maybe you have a layer style set in the tool options bar for shape layers.

The output of a select is boolean,how do i display it on the graph,its datatype being different?

the output of a select is boolean,how do i display it on the graph,its datatype being different?
Attachments:
comp.vi ‏37 KB

If you want to graph TRUE/FALSE in a graph, you can translate it to 1/0, using "Boolean to 0/1" inside boolean palette.
Hope this helps

When i enter my passcode, it appears as a different account. Every time i go to iforgot to reset my password, and then try to ise it, it doesnt work. Help please!!!

When i enter my passcode, it appears as a different account. Every time i go to iforgot to reset my password, and then try to ise it, it doesnt work. Help please!!!

Maybe it is not 'THI' that Siri is saying. I think it is 'GHI'. When I get to the passcode screen, she says "passcode field zero values".

How can I scale a graph for frequency instead of time or number of points?

Hi All - I have an application where I am reading the trace of a carrier from a spectrum analyzer. I have graphed this in the past with reading points on the trace which give me frequency and power. However that is very slow compared to just reading the trace off the analyzer which is returned as an array of 1001 power points in dBm. Because it is returned in dBm the Y scale of the graph is fine. However the X scale reads from 0 to 1000 which are he numvber of points. Is there a way to change the X scale or reflect the frequency of the data? For example I have the center frequency and the span setting from the analyzer and from that I can determine the start and stop frequency. However when I apply the minimum and maximum ranges for the X scale the displayed result changes. I would just like a way to change the X scale to what I want w/o the display being affected. Is this possible? Is there another solution that does not use the standard graphs in Labview that makes this possible? Thanks in advance for any help.
Troy

If you just got an array of values, you can use the property nodes XScale.multipier and XScale.Offset to scale your graph.
Your multiplier usually is the frequency bin distance (1/capture-length or here the span/1000) , and offset mostly zero (if your first bin represents the DC part of the DFT, here center -span/2)
Have you searched the NI drivers if you get a ready made driver of your SA? Some already read the frequency domain plots as a waveform including all scaling ...
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

Images on Facebook do not appear when using different web browsers

Images on Facebook do not appear when using Safari on my Macbook Pro (I've tried Google Chrome too with the same result). This makes me think it's a setting within OS Mavericks that I'm missing. I have not seen this issue on any other computers. This only occurs on my, and others' profile pictures on my profile page and on the news feed, not photos that are posted in albums or on walls. and yes, i have images enabled in Safari.
In safari the images don't appear, and in their place is a small blue "?" square >>.
In Chrome it appears as a broken image link >>
Has anyone encountered this? Is there a fix? It is very annoying.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Is there a way to place page numbers in different places within a document in Pages?

I have a document with multiple chapters and I need to place the page number in a different place at the beginning of each chapter than the rest of the document. For example, on the first page of each chapter, the page number must be at the center in the footer while on every other page, the page number needs to be in the right of the header. I know that there is a way to do this in Microsoft Word but I'm not sure how to do it in Pages. Anyone have any ideas? I would prefer not to have to download Word.
Thank you.

Hi Brian,
If you go with Peter's suggestion, there are some details that since I've got a minute here, I'll mention...
Set your Line Spacing for the document text to "Exactly" before you begin adjusting your table, otherwise you will have registration problems.
Your Table will have to be a Floating object. Otherwise you won't be able to slide it into the margin. And, speaking of the margin, stay out of the gray area with the numbers if you want to print them. The gray border around your document is the area that the printer driver says is non-printable.
In the Table Inspector, set Columns to 1 and Rows to 20 or whatever you prefer for your document. Set the number of Header Rows to 0.
To apply the numbering, use the Fill feature: Type 1 in the first cell, type 2 in the second cell. Select both cells. Grab the Fill Handle in the lower right corner of the selection and drag it down to add a series of numbers to the rest of the column. (Easier than typing.)
Decide how you want to justify the numbering. The Text Inspector has both vertical and horizontal justification controls for this. Just select the entire table and make the settings.
Set the cell height to match the text line spacing. You can get close with the table row height, and maybe closer with a minor line spacing adjustment. Don't expect perfection, but you can get pretty close.
You probably don't want the cell borders to show, so with the entire table selected, go to the Graphic Inspector and set Stroke to None.
Lastly, cause the table to appear on every page by doing: Format > Advanced > Move Object to Section Master.
Regards,
Jerry

I have downloaded the tv shows Homeland and Dexter. They have ended up in different places. Dexter is where is "belongs" in my itunes library on my NAS drive. Homeland ended up on my hard drive in the itunes/music/tvshows directory. Anyone know why?

Several months ago I bought and downloaded Homeland. Earlier this month I bought
Dexter Season 7. They have ended up in different directories. My iTunes library is
on a NAS drive and Dexter was stored there (where it belongs). For some reason,
Homeland got saved to my Mac hard drive in the itunes/music/tvshows directory.
This seems odd everything else I have downloaded, music, other tv shows, movies
have been saved to the proper place. I haven't changed the path to my iTunes
library in years.
Now, iTunes has kept track of these two tv shows and I synced them both
to my iPad. The only reason I know they are in different places
is because my wife couldn't find them on the NAS drive.
Mostly out of curiosity, I'd like to know why this happened and how to keep it from
happening again.
Oh, it's iTunes 11.0.3 running on a MacBook Pro with OS X 10.6.8.
Thanks
Bob

I don't think it is easy to move part of a collection unless you don't care about the metadata such as date added, etc. You can copy the files to the other drive, delete in iTunes the references to the copies still on your computer, then hold down the option key while dragging the files on the external to iTunes so it doesn't copy them back to your internal but just references them where they are. You have to remember to do this each time. Either that, or set preferences so iTunes does not automatically copy any file to your media folder when added but leaves them all where they land on your computer. You can move them by hand around the computer, but not between drives.
You could try Dougscript "Move Files To Folder" but I don't know if this enables iTunes to track items moved to a different drive. iTunes doesn't really like using multiple drives.
As for using Time Capsule, I have seen various takes on this. I recall reading somebody saying it isn't a good idea to have a backup drive competing for dual purposes. My take on it is, TC is a backup, period. If you keep your movies on it and the TC drive dies, you lose your only copy of the movies.
How often do you really watch these movies? Yes, it is nice having them appear in iTunes, but unless you are watching them every day then it isn't a huge burden to have them on another drive. Frankly, if I had iTunes movies I would probably make a whole different library for them and start from it with the external drive turned on when I was in a movie mood.

Y scales of graph appear at wrong/different places

Similar Messages

Maybe you are looking for