Is it possible to change the scale of graph in webi ?
Hi All,
How to change the scale of graph in the web intelligence report.
Thanks in advance,
Ravi
1. Set intervals on Y-axis values of the Webi report Charts from the Webi Chart Properties
2. Set the Interval of 500 with Y-axis value range 0 2000,such that the value should look like,0,500,1000,1500,2000
Reproducing the Issue
1. Create a Webi report from e-fashion with objects Year and Sales Revenue.
2. Run the Webi report>Turn to Column Chart.
3. Go to Chart properties>Y Axis>Scale
4.Here there are 2 options.
5. Min value, Max value however the major unit option is not available like one we have in Crystal Reports and Deski
Environment Details:
1. BOXIR2, BOXI3.0
Cause
This is a limitation in Webi report.
Resolution
Enhancement_Request ADAPT01202508 for this issue has been raised however there is no specific timeline as of now defined about which major release this feature will be included in.
Regards,
Sarbhjeet Kaur
Similar Messages
-
Is it possible to change the first page of a web application that was built using the UI?
Hello Community
Using Sharepoint 2010 Server and the UI I built and application and would like
to continue building the web application using the UI.
The application's first page was built using a Blank Site template and
the subsequent subsites were built using the Team Site template.
In retrospect the first page should also have been built using a Team Site template.
It may be unnecessary to make to delete the application
and create the first page as a Team Site and then have to create all of the
subsites (Team Sites) all over again.
As a solution to prevent deleting the whole application and creating application
with all of the subsites all over again whether it is possible to do any of the
following:
- Convert the Blank Site page into a Team Site page which would allow
me to leave all of the subsites as is.
- rename the Blank site page which would in effect would be renaming the application
then create a new Team Site page which would be essentially creating a new application and
then adding all of the subsites contained in the renamed application that has the first page
as a Blank page.
And if is possible to add, copy or move the subsites from existing sites to a new Team Site
page, how do you add, copy or move the subsites from one application to a diffent application?
Thank you
ShabeautHi Shabeaut,
According to your description, my understanding is that you want to change the template of the root site without creating the susites in another web application.
I recommend to export all the existing subsites and import them to new web application.
More references:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/cc7c11ec-e4da-4ddb-babd-db76ccb35664/move-subsite-to-new-site-collection?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd321bac-16a7-47e4-842e-00b7ca0f7f05/move-subsite-to-other-site-collection-as-subsite?forum=sharepointadminprevious
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Changing the scale on graphs?
I've got a graph that'll always be whole numbers, so 3.25 doesn't do me much good...
is there anyway to force a whole # count?
TIASelect the graph then Inspector. Set your scale intervals (Value Axis Steps).
Before:
After:
Regards, -
Is it possible to change the wait indicator
Hi,
Is it possible to change the wait indicator in a web dynpro abap application ? if yes , how ?
user clicks on a button or link etc on a page and before navigation to other view takes place or before necessary modifications on the current view takes place, a wait indicator appears on the screen. It is possible to change that ?
Regards
seventyrosHi.,
I think it is possible., because when I run Web Dynpro application in IDES system one wait indicator came and when I run in Dev another wait indicator came., So I think it depends on server settings. U can use any of sap standard themes. check with your basis team.!! Also as suggested, look for themes.
hope this helps u.,
Thanks & Regards
Kiran. -
Is it possible to change the color of imported art in pages, say from B&W to a color? ... or even to make it a gradation of color?
Make a Shape > Inspector > Graphic > Tinted Image Fill > Scale to fit > browse to image > click on the color patch to change the color to what you want
or
Drag in an image > overlay it with a Shape > select the color for the shape and change its Opacity
Shapes may have Gradient and Advanced Gradient (multiple colors) fills both linear and radial. Both are in the Graphic Inspector as is Opacity.
Peter -
Changing the scale of a eprint job
Is it possible to change the setting for the scale of an eprint job? I need to print something to be 110% to enlarge it for our clients. Thank you.
Hi there, if you are printing by sending an email attachment to the printers email address its not possible to edit the print settings. If you are printing via the ePrint mobile print app from a smartphone or tablet then you do have the option of adjusting print settings but scaling is not one of them.
Sorry about that.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee. -
I'd like to know if it's possible to change the number of weeks to be displayed in the month view in calendar? Thanks!
No.
There are up to six calendar weeks that might be used to display the 31 possible days in a month.
So the month view displays six weeks. -
Is it possible to change the ALV report layout settings in spool request
Hi All,
Please let me know is it possible to change the ALV layout settings in background as we can change the layout settings in foreground to get correct format when download to excel.
Regards,
Jyothi CH.Hello,
Add a parameter for layout on selection-screen (p_varmm LIKE disvariant-variant).
As you are in backgroud mode, ALV will be printed with this layout (assuming you call correctly the MF ALV_LIST or REUSE_ALV_GRID)
Regards,
Christophe -
Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered.Does anyone know if it is possible to change the display in week view to show all 24 hours per day for those of us that work irregular hours.
Also is it possible to have all of the 'all day' entries showing, not just 3.5 of them.
The app Week Cal HD was the perfect calendar until Apple removed it so could they please offer the same facilities that it offered. -
Recently, I discovered I have two iCloud accounts. Is it possible to change the Apple ID for one of the accounts to match the other account, without losing the information from either account.
thanksWelcome to the Apple Community.
It's a little tricky to move data from one iCloud account to another but it can be done. But what makes you think you have 2 iCloud accounts. -
Can you change the scale of brush resizing?
Hi there,
When changing brush size in CS6, I've noticed that it is has granular resolution from 0 pixels up to around 500pixels, incrementing in size very slowly. However, above 500 pixels it increases in size very rapidly, jumping to 800, 1200, 1500 and then into the 2000s.
As most of the photos that I work on have a high pixel count I find that my ideal brush size is between 400 and 1000, occasionally I use it at around 100 pixels, and occasionally at 2500.
Is there any way of changing the scale of the brush size so that it allows greater sensitivity in the 400 to 1000 range?
Cheers!
Andrew.Thanks for pointing out that useful way of changing the brush size. Unfortunately I think it goes too far the other way ie. it changes size too slowly . Instead, the suggestion from conroy (see below) works a lot better as it alters the size in increments of 10.
Thankyou very much though!
Andrew. -
Is it possible to change the video card of a pavilion g7-1075dx?
So, I have an HP Pavilion g7-1075dx Notebook with Windows 7. I'm an avid gamer and wish to play the newest games. However, there's one problem thats keeping me from doing so. Alot of the newer games require newer video/graphics cards. This particular laptop has an ATI Mobility Radeon HD 4250. The newest games seem to require ATI Radeon HD 4850 and above. This is the only thing thats keeping me from playing games like Starcraft II on the highest settings OR in the case of Star Wars: The Old Republic, it almost keeps me from playing the game, period, due to the graphics being too much for my current card to handle, causing massive lag. I was hoping I could change the video card. Upgrade. However, i've heard that with most laptops or notebooks you can't upgrade anything other than the RAM. I'm hoping anyone on here can help me out and tell me if it is possible to get a new video card for my laptop. We don't have a desktop computer so this laptop is my only hope for a long time to play newer PC games.
Alright, let me put this in a simpler message: Does anyone know if it is possible to change the video card currently in my laptop, the HP Pavilion g7-1075dx, for a newer and better one. ATI Mobility Radeon HD 4250 to ATI Radeon HD 4850 or higher.
-
Is it possible to change the colour of box in script from black to blue
Hi,
Is it possible to change the colour of box in script from black to blue or some other colour and background colour also...if so how....
Thanks.No..
It is not possible in scripts..
In scripts u cannot use colors..
In smartforms u can do that..
reward if it helps u..
sai ramesh -
Hi people,
I'm typing from Brasil, sorry my English.
I have a iMac 21,5" Intel mid 2011 and I need to know if is possible I change the original 500Gb HD for a 512Gb SSD?
I intend to keep the original DVD driver and install the SSD in the same HD place.
If yes, where I find a tutorial about this?
And I will like to know if the 512GB Solid-State Drive Kit for Mac Pro is compatible with iMac.
http://store.apple.com/us/product/MC731ZM/A/512gb-solid-state-drive-kit-for-mac- pro?fnode=5f
What brand and model of SSD do you recommend?
Thanks a lot for now and best regards all.
Carlos Sgrillo
Porto Alegre, RS, BrasilTukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/ -
Is it possible to change the order of the fields in the int table?
Hello
Is it possible to change the order of the fields in the int table?
Lets say itab has the following fields :
F1, F2, F3
I would like to see it as F2 F3 F1
Thanks>
Comandante Che Guevara wrote:
> Lets say itab has the following fields : F1, F2, F3
>
> I would like to see it as F2 F3 F1
What do you mean by "like to see" ? You can WRITE the fields in any order you want. If you want to display the internal table in an ALV you can manipulate the fieldcatalog.
If you want something else other than display the field, you have to explain your req. in detail.
BR,
Suhas
Maybe you are looking for
-
I don't know what suddenly caused this. I haven't installed anything weird or obscure, I've kept up with all of the normal updates for Windows, my anti-virus, and other normal software (Adobe, Apple products, Steam). So all I did today was double-c
-
How to allow Sharepoint users to login from multiple parent-child accounts?
Our client has mutliple AD domains and wants to allow people which have multiple AD accounts in multiple domains to login as THE SAME user: - only primary account will be visible in search - there will be only one user profile with all informations g
-
FM navigate to SC, PO, etc
Hi all, I'm creating a custom webdynpro in wich I have a table with some documents. I need to navigate to these documents when the user click on them. I don't know if exits any standard FM for that, I couldn't find any. So, I'm trying to create a cus
-
Image quality on adobe photoshop sketch?
Sorry if this is in the wrong forum. Wasn't sure where to post. I'm thinkin' about getting an ipad and using photoshop sketch or something similar. Maybe I'm not looking in the right place, but I can't find any info about file size. I mean is a sketc
-
Using "Execute Javascript" to mark a course as Complete.
I am using a 3rd party Flash-based player (Flashform) to bundle Captivate and Flash made SWF files into a SCORM 1.2 package. My final SWF is a Captivate assessment, which, if passed, should change the course lesson status to "completed". Can I accomp