Yahoo emails display sender, subject and body in email listing

The past couple of days my yahoo mail displays subject and as much of the body that space allows. The folders are all messed up. The whole screen is a mess. Nothing like it used to be. It works fine in IE.

Reset the page zoom on pages that cause problems.
*View > Zoom > Reset (Ctrl+0 (zero); Command+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

Similar Messages

Mailbox Quota Message, Sender, Subject and Body blank?

Running Leopard Server, I have mail quotas enabled. System sends the email to the user but the email message From Address, Subject, and Body are blank. I have them set in Server Admin but they don't show in the message. Is there a setup file that I can edit in terminal to correct?

Haven't checked yet on Leopard, but I would think the files are:
/private/etc/mail/quota_warning.txt
/private/etc/mail/quota_exceeded.txt

Customise the email submit button with custom email, cc, bcc, subject and body - almost working!!

Hi
I have been working on trying to customise the email submit button to custom entry email address, cc, bcc, subject etc etc
You can use the pre-submit function on the email button
I am using the following code:
this.event__click.resolveNode("#submit").format = formatlist.rawValue;
this.event__click.resolveNode("#submit").target = "mailto:"+customemail.rawValue+"?subject="+subject.rawValue+"&cc="+cc.rawValue+"&bcc="+bcc.rawValue+"&body="+body.rawValue;
THis is picking up values from a dropdown and a series of text boxes the values of each area.
This works beautifully except for the subject area. For some reason teh subject area copies the entire srting from the subject onwards, all other areas (cc & bcc & body) all only copy the value assigned to its function.
Any thoughts
Feels like a bug in the coding but it may also be intentional.
Thanks

I believe that there was a bug logged for this issue, here is a workaround.
Add a regular button to the form used to execute the EmailSubmit button (you can make the EmailSubmit button invisible)
On the click event of the "newly added" regular button add your script
NameOfEmailSubmitButton.event__click.resolveNode("#submit").target = "mailto:"+customemail.rawValue+"?subject="+subject.rawValue+"&cc="+cc.rawValue+"&bcc="+bcc.rawValue+"&body="+body.rawValue;
NameOfEmailSubmitButton.execEvent("click");

Change email subject and body

Hi ,
For one of my requirement, the email subject and body has to be changed. For order confirmation and quotation, the standard behaviour of having the smartform name as the subject name should be changed and ther ehas to be a dynamic subject name. Similarly the email content should also be changed. Is this possible? Can anyone suggest me the steps?
Thanks.

Hi,
Could you please tell what method are you using to create emails?
If it is using workflows then you can change the subject and mail body dynamically using parameters and expressions.
If you are sending mail using an FM call, then also you can create dynamic subject and mail body.
Please provide the details so that an appropriate solution could be provided.
Regards,
Saumya

Using variables to populate Email Address, Subject, and Body

I am trying to setup a for to alert contractor when their service calls are completed. I would like to use the email address, Subject, and body from fields on the PDF form.
On the Button I am using the following Click / Javascript
var myDoc = event.target;
var rEmail = CuEmail.rawValue;
var rSubject = EmailSubject.rawValue;
var rBody = DescribeProblem.rawValue;
myDoc.mailDoc(
false,
rEmail, "", "",
rSubject, "", "",
rBody, "", "",
Nothing happens when I click the button with this code. But, if I drop the last comma from:
rBody, "", "",
It will send the email with the correct email address and it will include the subject like I want it. It will just not populate the body section of the email.
Any help would be greatly appreciated.

I had a similar requirement and but took a different approach for a request/reply model. There are two fields on the form that the request fills in that directs how the submit button will work for the responder...
RequestFileType (This can be PDF, XML, or XDP)
RequestDestination ( This the URL, FTP site or email)
Here is the script that I run on the Presubmit event for the form when it initializes.
MaterialCompositionInformationDistribution.RoHSpage2.RoHSDirective.SubmitMCDFormButton.#ev ent.#submit.target = MaterialCompositionInformationDistribution.RoHSpage1.RequestInformation.RequestDestinatio n.rawValue;
MaterialCompositionInformationDistribution.RoHSpage2.RoHSDirective.SubmitMCDFormButton.#ev ent.#submit.format = MaterialCompositionInformationDistribution.RoHSpage1.RequestInformation.RequestFileType.r awValue;
What it does is poke values into the submit button basically. To send to an email address. you enter mailto:[email protected] or to post to a servlet you would enter http://www.domain.com/foobarservlet

Payment advice notes by email (change in sender id) and body

Hi experts ,
I am trying to change the sender name and body of the mail that is send by mail.does this code work i called SO_NEW_DOCUMENT_ATT_SEND_API1 in Z_PAN_EMAIL_00002040.
look in the code and also tell me me does this work out. can some one tell me what is the 'SAPoffice' in this code. (ls_document_data-obj_name = 'SAPoffice'.) in fill document data part.
FUNCTION Z_PAN_EMAIL_00002040.
""Local interface:
*" IMPORTING
*" REFERENCE(I_REGUH) LIKE REGUH STRUCTURE REGUH
*" CHANGING
*" REFERENCE(C_FINAA) LIKE FINAA STRUCTURE FINAA
data: zadrnr like adr6-addrnumber,
 zsmtp_addr like adr6-smtp_addr,
 zremark like adrt-remark,
 begin of zcon occurs 0,
 zadrnr like adr6-addrnumber,
 zconnumber like adr6-consnumber,
 zsmtp_addr like adr6-smtp_addr,
 end of zcon.
 refresh zcon.
 select single adrnr into zadrnr from lfa1 where
 lifnr = i_reguh-lifnr.
 if sy-subrc = 0.
 select addrnumber consnumber smtp_addr into table zcon
 from adr6 where addrnumber = zadrnr.
 endif.
 loop at zcon.
 clear zremark.
 select single REMARK INTO ZREMARK FROM ADRT
 where addrnumber = zcon-zadrnr
 and consnumber = zcon-zconnumber.
 TRANSLATE zREMARK TO UPPER CASE.
 if sy-subrc = 0 and zremark = 'REMIT'.
 zsmtp_addr = zcon-zsmtp_addr.
 exit.
 endif.
 endloop.
 IF zsmtp_addr <> ' '.
 search zsmtp_addr for 'britishcouncil' .
 if sy-subrc <> 0.
code modified to check if sy-subrc = 0.
 C_FINAA-NACHA = 'I'.
CODE MODIFIED AS PER SAP NOTE 1033893 .
 C_FINAA-NAMEP = 'Testname'.
 internet address of partner company clerk has been changed by pradeep akula as per requirements.
 C_FINAA-INTAD = zsmtp_addr.
 C_FINAA-FORNR = 'Z_F110_IN_AVIS2'.
this zzmail_sender_addrr and zzmail_body_text did not work in testing.
 C_FINAA-ZZMAIL_BODY_TEXT = 'This is a test body text'.
 C_FINAA-ZZMAIL_BODY_TEXT = 'Payment Advice Notes attached, please do not discard this message .All vendors should please add their company name'.
 endif.
ENDIF.
code changes done by pradeep akula for Body of mail .
CLASS cl_abap_char_utilities DEFINITION LOAD.
TYPES: t_solisti1 TYPE TABLE OF solisti1,
 t_sopcklsti1 TYPE TABLE OF sopcklsti1,
 t_somlreci1 TYPE TABLE OF somlreci1.
DATA: lt_content TYPE t_solisti1,
 lt_packing_list TYPE t_sopcklsti1,
 lt_header TYPE t_solisti1,
 ls_document_data TYPE sodocchgi1,
 l_subject TYPE solisti1-line,
 l_content_lines TYPE i,
 lt_receiver TYPE t_somlreci1,
 l_address TYPE adr6-smtp_addr,
 l_new_object_id TYPE sofolenti1-object_id,
 l_sent_to_all TYPE sy-binpt,
 l_msg_text TYPE string,
 l_rc TYPE sy-subrc,
 l_user TYPE sy-uname.
DATA: l_crlf(2) TYPE c.
DATA: BEGIN OF crlf,
 x(1) TYPE x VALUE '0D',
 y(1) TYPE x VALUE '0A',
 END OF crlf.
l_crlf = cl_abap_char_utilities=>cr_lf.
receiver address
DATA: ls_receiver TYPE somlreci1.
ls_receiver-receiver = zsmtp_addr.
receiver address type (internet address)
ls_receiver-rec_type = 'U'.
communication type (send via internet)
ls_receiver-com_type = 'INT'.
APPEND ls_receiver TO lt_receiver.
SAP name: used for the shortcut to the inbox (optional)
l_user = p_user.
l_user = ' '.
mail subject
l_subject = p_subj.
DATA: ls_content TYPE solisti1,
 ls_header TYPE solisti1.
fill the document data.
READ TABLE lt_content INDEX l_content_lines INTO ls_content.
ls_document_data-doc_size =
 ( l_content_lines - 1 ) * 255 + STRLEN( ls_content ).
ls_document_data-obj_name = 'SAPoffice'.
ls_document_data-obj_descr = 'Test mail form payment advice its working'.
ls_document_data-obj_prio = 5.
ls_document_data-priority = 5.
fill data of mail
DATA: ls_packing_list TYPE sopcklsti1.
update the packing list.
ls_packing_list-transf_bin = ' '.
ls_packing_list-body_start = 1.
ls_packing_list-body_num = l_content_lines.
ls_packing_list-doc_type = 'RAW'.
APPEND ls_packing_list TO lt_packing_list.
ls_header-line = 'Test header - Vish'.
append ls_header to lt_header.
ls_content-line = 'Test mail form payment advice what you want to print here'.
append ls_content to lt_content.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 document_data = ls_document_data
 commit_work = 'X'
 IMPORTING
 sent_to_all = l_sent_to_all
 new_object_id = l_new_object_id
 TABLES
 packing_list = lt_packing_list
 object_header = lt_header
 contents_txt = lt_content
 receivers = lt_receiver
 EXCEPTIONS
 too_many_receivers = 1
 document_not_sent = 2
 document_type_not_exist = 3
 operation_no_authorization = 4
 parameter_error = 5
 x_error = 6
 enqueue_error = 7
 OTHERS = 8.
IF sy-subrc <> 0.
keep error message
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
 INTO l_msg_text.
ENDIF.
endfunction.

Hi Pradeep,
you can change the sender, when you change the system-field SY-UNAME before calling FM SO_NEW_DOCUMENT_ATT_SEND_API1.
REPORT Z_TEST_SEND_MAIL.
h_uname must be a SAP-UserId.
sy-uname = h_uname.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 DOCUMENT_DATA = DOC_CHNG
 PUT_IN_OUTBOX = 'X'
 COMMIT_WORK = 'X'
 TABLES
 PACKING_LIST = OBJPACK
 OBJECT_HEADER = OBJHEAD
 CONTENTS_BIN = OBJBIN
 CONTENTS_TXT = OBJTXT
 RECEIVERS = RECLIST
 EXCEPTIONS
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 OPERATION_NO_AUTHORIZATION = 4
 OTHERS = 99.
I tried it and it was successfull.

I have an email account on qou but all the incoming emails subject and body appear as question marks, why???

I have an email account on QOU (al-quds Open University) but all the incoming emails subject and body appear as question marks, why???

Try to set the Boolean pref gfx.font_rendering.directwrite.use_gdi_table_loading to false on the about:config page.
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"

Emails appear in bold text (subject and body)

A few days after installing OS X Yosemite on my iMac, all of my Comcast emails appear in bold text (subject and body text). This makes it difficult to distinguish unread email from read email. I view email directly through the Comcast website (NOT with Outlook or Mail). This issue happens in Firefox and Safari. My email looks normal on other devices. I am working with Comcast to try to resolve the issue, but since it started a few days after upgrading to Yosemite, I thought I'd check here too.

Try to set the Boolean pref gfx.font_rendering.directwrite.use_gdi_table_loading to false on the about:config page.
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"

Setting Mail Subject and Body

Hi,
I have configured sending a mail with PDF attachment for Invoices in NACE. the program is RLB_INVOICE The mail goes fine with the PDF attachment to external mail address.
Now I need put subject and Body for the email.
There are 2 issues now.
1. In transaction NACE i am using "Mail title and texts" node when i fill the Document title, the same document title appears for the e-mail subject as well as the name of the attachment. But i need different names for the subject and attachment and the invoice number must be present in the subject.
2. Under the "Text" tab when i maintain some texts, this doesn't appear anywhere in the mail.
How do i maintain Subject and Body for the e-mail.
Regards
Rajvansh

Hi
Keep break point at SO_OBJECT_SEND.
In the first screen
VF01 / VF02 ->
Set the Output type not to process immediately, use custom own transaction.
Save and come out of transaction.
And again
VF01/ VF02 ->
Issue Output type select the Output with medium 5.
and click on the OK button.
It should stop.
To pass value from driver program to Enhancement point.
I used FIELD SYMBOLS.
Since i am offline, i do not have exact syntax.
It will be something like this
FIELD SYMBOLS : <OUTPUTTYPE> type any.
ASSIGN '( PROGRAMNAME(FIELD NAME)) TO <OUTPUTTYPE>
IF <OUTPUTTYPE> IS ASSIGNED.
ENDIF.
Or
If it is custom driver program, you can use memory ID's also
Regards
MD

Mailto Subject and Body

I've been working on an app that involves sending an email. I usually have no problem sending an email with just the recipient information, but this time, I am trying to add a preconfigured subject and body. I have looked at a few example online and used them, but I still can't seem to get the function to work. Here is the example I have been using:
NSString *url = [NSString stringWithString: @"mailto:[email protected]?cc=[email protected]&subject=Greetings%20from%20Cupertino!&body=Wish%20you%20were%20here!"];
[[UIApplication sharedApplication] openURL: [NSURL URLWithString: url]];
The only time a preconfigured subject and body do work properly is when they are just one word.
Any help would be appreciated.

Use MFMailComposeViewController instead.

Change mail subject and body

Hi all,
I configured a 'printer' in SPAD that is used to send email with pdf attachments with the smartforms / sapscritps that I developed.
Is there a way to change email subject and body instead of standard text "The Mail Attachment Contains the Print File Created by User" bla bla bla?
This is critical to me.
Thanks in advance!
Regards,
André

If you are already able to send the pdf attachment through mail using Function Modles 'CONVERT_OTF_2_PDF' &
SO_NEW_DOCUMENT_ATT_SEND_API1 and the problem is with subject and Attachment name only then
in the SO_NEW_DOCUMENT_ATT_SEND_API1 function Module
For Subject
EXPORTING
document_data = docdata
For Attachment Name
TABLES
packing_list = objpack
Declarations for the above two are
DATA:
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
docdata LIKE sodocchgi1.
and the values you need to pass are
objpack-obj_descr = 'Invoice'. "Attachment name
docdata-obj_descr = 'Mexico Direct Invoice'. "Subject of the mail
Thanks,
Phani.

IPAD3/IPAD2 :PDF files/ attachments sent in an email displayed inline ( embedded within the main email) in the message text on both my Ipad2 and Ipad three, however the same email displayed the PDF File icons/ attachment on both my Iphone and a friend's

IPAD3/IPAD2 :PDF files/ attachments sent in an email displayed inline ( embedded within the main email) in the message text on both my Ipad2 and Ipad three, however the same email displayed the PDF File icons/ attachment on both my Iphone and a friend’s PC. How do i get both my IPAD devices to display the PDF icons/attachments? Bearing in mind if i open the same email over the internet the PDF Icons/attachments display OK!
Has anyone come across this? Your advice/help would be most appreciated

This happens to me all the time.
If is a one page PDF it seems as though it comes over already open and inline in the body of the email. Multiple page PDF files show as the PDF icon.
I can't find any official documentation of this - other than based on my own experience with PDF attachments in my various email accounts.
Message was edited by: Demo

Change mail subject and body text

Hi all,
i activated access method M in tr. SPAD and via this method i'm sending various reports in PDF to external e-mails. But when recepitiens recive e-mail i have subject of e-mail composed of SYSTEM ID and SPOOL NUMBER (e.g. R3P-12345) and i also have defaulted mail body text :
The Mail Attachment Contains the Print File Created by User XXXXX , with Number xxxx from SAP System R3P .
To Print the Data, Open the Mail Attachment with a Suitable Program and Print the Document.
How can i change mail subject and body text?
Regards,
PS*

For the output type Maintian the Mail body and subject.
You can do this at NACE==>Output Type ==> Mail title and texts
rgds,
TM
See the link
http://www.geocities.com/rmtiwari/main.html?http://www.geocities.com/rmtiwari/Resources/MySolutions/Dev/UtilityCode.html
Message was edited by: Thomas Mann

Setting windows mail as default "Mail To" doesn't work as usual. Opens entire windows mail vs. email new email message with subject and URL inserted

I have a problem never had B 4. Have installed new Win7 OS many times and imported windows mail. Always when choosing windows mail in FF it worked. Now when doing I get windows mail program opening or if open coming to forefront or screen. Supposed to get a new email message with subject and URL inserted. I have searched many answers fro FF & MS. I have set WinMail as default, add ed same in reg, etc. etc. Still NADA. Any ideas? thanks

You should post here:
Microsoft Office forums >
Word IT Pro Discussions
S.Sengupta, Windows Entertainment and Connected Home MVP

How translate Subject and body for a e-mail task to different languages ?

We have several tasks with their corresponding subject and body text in a workflow.
We would like to know if there is an easy way to translate all of them to several languages ?
Thanks in advance.
Juan.

Hi Juan,
The translation tools don't translate the subjects. I've found the best way to save yourself headaches is to log on in each target language and edit each task. Slightly longer but more reliable, simple and problem-free.
Cheers,
Mike

Yahoo emails display sender, subject and body in email listing

Similar Messages

Maybe you are looking for