Yamaha PSR-293 not working with MainStage

I managed to make it work with GarageBand, but not MainStage. Please Help..

Hi
Does it work if you load in the Empty "Keyboard Starter" template?
CCT

Similar Messages

Why is my guitar not working with mainstage?

I've plugged the guitar into my Tascam US-1641 and I've made the amp channel to be channel 9 instead of the built in input after telling mainstage to look for the tascam and then nothing happens. I've tried everything. Please help.

Hey Mgpr,
There's an article that helps with troubleshooting steps for issues activating iMessage that I think is worth a look. See if any of the suggested steps work for you:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Sincerely,
Delgadoh

I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Mainstage not working with audio interface

Hi,
I'm having problems in using Mainstage with my audio interface, a Tascam US-600.
Mainstage does not receive any input signals when I connect a microphone or a guitar into the Tascam and use it with Mainstage. I selected the audio interface as audio input and tried with all the inputs (from 1 to 6) that the channel strip let me select. For the audio output, when I select the built-in output I can not hear nothing; when I select the Tascam outputs, I can hear just the NON-PROCESSED sounds.
I don't know what to do, because I realized these other facts:
     - Mainstage works with a MIDI device directly connected to the Mac with a MIDI-USB cable;
     - The Tascam, as written above, receive the input signals. Using it with GarageBand it gives me no problems, with the same instruments (both                microphones, guitars and the audio interface) and connections!
     - Also if it gives me problems with feedbacks and noises, the built-in microphone seems to work with Mainstage - at least MS recognise input signals.
Thanks in advance for your answers and sorry for my English if it's not so smooth.
Francesco

dmriveratre wrote:
The problem is that since the MacBook only has two USB ports, I am having to use a USB hub. <snip>
When I quit Mainstage and unplug the USB hub and only using either both interfaces, or one interface and the midi controller, it works fine.
Hi
Is the Hub a powered one or ?
Sounds like you need a better (powered?) one
CCT
edit
Could be an overall power limitation if everything is bus powered? Can you use external PSU's for any of the kit?

MainStage not working with FA-101

I have an FA-101 firewire interface and I cannot get it to work with mainstage. The device works in Logic just fine. I cannot seem to get any audio in. Just noise from the amp sounds. At first I thought it was my aging PB G4 1.25Gh but this was also the case on my PM G5. I have mainstage working with my MOTU 828II but not with the FA-101. Any suggestions or similar problems? (OS 10.5.1)

I had a such an occurrence as well. I unpluggged the firewire cable and re inserted it. When I was prompted as to wheather or not I wanted to use this device I clicked yes. My FA-101 then started working. This was using a Powermac pro w/ FA-101.

HT5316 I've been working with Mainstage 2.1.3 and have experienced concerts crashing immediately after loading. I'm not installing Mainstage 2.2.2 to see if that helps alleviate the issue. My question is: should I uninstall Mainstage 2.1.3 now?

Hi all,
I've been working with Mainstage 2.1.3 and have experienced concerts crashing immediately after loading. In an attempt to solve crash issue, I've installed Mainstage 2.2.2 to see if that helps alleviate the issue. My question is: should I uninstall Mainstage 2.1.3 now in order to save memory?
thanks,
korriefromca

Hi
korriefromca wrote:
My question is: should I uninstall Mainstage 2.1.3 now in order to save memory?
You would only save about 500MB by deleting MS 2.1.3. You may find it useful to keep the application, or perhaps to make a zip and then delete the original
CCT

M-Audio MIDISPORT UNO USB Not Working With Snow Leopard

My Snow Leopard installation worked fine except until I plugged in my MacBook to my Casio Privia with the M=Audio MIDISPORT UNO USB cable to run GarageBand. I'm getting a MIDI error which states it can't work with the latest operating system. It doesn't surprise me though for all the software and hardware driver updates that have to catch up to such a new OSX 10.6. I went to the M-Audio site to download the latest driver, but the drivers only were compatible with OSX10.5.8.
This is an alert at the site
Mac OS X 10.6 Snow Leopard Support Coming Soon
Avid/M-Audio working closely with Apple to offer support for OS X 10.6
Avid/M-Audio is pleased to hear that Apple has released Mac OS X 10.6 Snow Leopard. We’ve been working closely with Apple to bring Snow Leopard support to the M-Audio® product line, as well as the Pro Tools® product line and extended product families. We ask that all existing Mac users please wait to upgrade until we officially announce Snow Leopard support. Stay tuned for more information in the coming weeks.
This is a bit of a concern, because I need to get GarageBand running again with the MIDI hook ups. Is there a work around anyone knows about to get MIDI working with Snow Leopard.
Thanks Steve

I ran into a similar problem. I discovered one thing which may help you out though. It works OK with my Yamaha P200 keyboard but it does not work with my Yamaha NP30 keyboard. I looked at the MIDI stream and the only difference seems to be that the NP30 sends a continuous stream of MIDI clock, whereas the P200 does not. My theory is that this clock stream is somehow confusing the driver. I can't seem to disable the MIDI clock on my NP30 but if your Privia has the ability to disable MIDI clock, then it may be worth a try as it will probably fix the problem until they come out with the proper drivers.

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

My operating system windows XP not working with photoshop cloud, why not?

I need to add 2 more licences for photoshop cloud and I'm being told my operating system windows XP does not work with Photoshop cloud. We already have 2 pcs using it in our office so why not?
Please help
Roy

Do you have the latest version of iTunes? If not, get it at:
http://www.apple.com/itunes

Adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

adobe creative cloud eea 1.5 is not working with our asus Eee box , celeron j1900 2.00 ghz, 4gb of ram, 64bit. can settings be changed in adobe?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Application is not working with mouse

Dear All,
We have a strange issue in the our application (Oracle form) in the one of our client machine.
Some times the forms are not able to work with the mouse but is able to work with the keyboard. After one or two machine restart its again working. When the issue occur we can able to work in other applications using mouse.
Our Applications server is in Other country and client are accessing from India.
This occurs for some user and not for all.
Application server Version 10.1.2.0.2.
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit
Java Plug-in version 1.6.0_31 .
Please any info will help us lot.

Thank you for the quick replies Michael Ferrante and HamidHelal.
But since its occurring for some users (perticulary indian users) and some times. And also its occurring in production environment not in development environment.
Even the java control panel is not working with mouse.
For other country customers everything working fine.
So its difficult for me to apply the patch with these uncertainties.
Checking with fresh java installation and let you know the status.
Thanks.

Voice Memo is not working with iOS 8.2

Voice Memo Records is not working with iOS 8.2. how to fix it?

Voice Memo Records is not working with iOS 8.2. how to fix it?

On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
i cant see menu page on display screen

http://support.apple.com/kb/HT1808

Caller ID not working with Nokia 6600?

I have a T-Mobile (US) Nokia 6600, and I can't seem to get address book to display incoming SMS or the caller ID of incoming calls. I've successfully paired the phone via bluetooth, and I can make address book dial the phone and send an sms. I can sync via iSync, use my phone as a modem, etc. etc.
But regardless of what settings I tweak, I can't seem to get Address Book to show a bezel of any kind on incoming calls - not even an 'Unknown Caller' message! Am I missing something obvious? Third party apps like BluePhoneElite work just fine, so I'm pretty sure it's something wrong with Address Book...
15" Aluminum Powerbook 1.5 GHz Mac OS X (10.4.5)

mdcdsc wrote:
My caller ID does not work with the new ap either. I don't like the new ap at all. The old one was beautiful. Now my email is very hard to see, so much that I will just use the Apple email that comes with my IPOD. The caller ID was my favorite thing with the old ap. and now it doesn't work. I have followed the instructions and turned everything on, but it just does not work.
The Caller ID issue was due to an outage. It should be resolved anytime soon. Can yu log out and log back in. Go to app settings and in notifications and turn CAller ID off and on.
On email - what do you mean 'email is very hard to see' ? I would like to pass on this feedback to the team.

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Yamaha PSR-293 not working with MainStage

Similar Messages

Maybe you are looking for