Yellow Line below Work Area in Timeline Panel

I know that a red line below the work area in the timeline panel means that rendering preview files is necessary before playback, and that a green line means that rendering preview files is completed.
Can someone fill me in as to what a yellow line means. Clips seem to playback without difficulty when the line is yellow and the sequence imports into Adobe Encore without difficulty.
Thanks.

As per Curt's answer, you might want to compare your Project/Sequence Presets, and the specs. of those Assets. They should match. If you need help getting the exact specs. of those files, Properties Panel should help you. If not, G-Spot will likely give you all you need.
Good luck,
Hunt

Similar Messages

Header line and work area

Hi,
can anyone please explain me wht is the difference between header line and work area???

Hi,
INTERNAL TABLES
- Internal tables are used to obtain data from a fixed structure for
dynamic use in ABAP.
- Each line in the internal table has the same field structure.
- The main use for internal tables is for storing and formatting data from
a database table within a program.
WORK AREAS
- Work areas are single rows of data.
- It should have the same format as any of the internal tables.
- It is used to process the data in an internal table one line at a time.
Internal Tables with Header Line : Here the system automatically creates the work area. The work area has the same data type as internal table. This work area is called the HEADER line. It is here that all the changes or any of the action on the contents of the table are done. As a result of this, records can be directly inserted into the table or accessed from the internal table directly.
Internal Tables without Header Line : Here there is no work area associated with the table. Work area is to be explicitly specified when we need to access such tables. Hence these tables cannot be accessed directly.
HEADER LINE----
CREATED EXPLICITLY------
1.Internal table created by referring to another table
Syntax: Data <f> <type> with header line.
<type> refers to a table data type or table data objects using type or like.
Here internal table <f> is created of the type <type>.
Example:
DATA t_line TYPE line OCCURS 10 with header line.
2. Internal table created by referring to existing structure
Syntax: Data<f> <type> occurs n with header line.
The lines of the internal table <f> have the data type specified in <type> (Can use either like or type).
Example:
DATA flight_tab LIKE sflight OCCURS 10.
CREATED BY DEFAULT---
3. Internal table created With a new structure
Syntax: Data : Begin of <f> occurs <n>,
<component declaration>,
End of <f>.
Work area is created by default.
Example:
Data : Begin of itab occurs 10,
column1 type I,
column2(4) type C,
column3 like mara-ernam,
End of itab.
reward if useful
Regards

Diff between header line and work area.

Diff between header line and work area.

Hi,
These are table with header line.
DATA: T_TABLE type table of <table_name> with header line.
data: begin of t_table occurs 0,
 field1 type ...
 field2 type ...
 field3 type ...
 end of t_table.
The result is:
TABLE
FIELD NAME |FIELD1|FIELD2|FIELD3|
HEADER LINE |EE1 |EE2 |EE3 | <---- Line 5 content
 1|AA1 |AA2 |AA3 |
 2|BB1 |BB2 |BB3 |
 3|CC1 |CC2 |CC3 |
 4|DD1 |DD2 |DD3 |
 5|EE1 |EE2 |EE3 |
These are table without header line.
DATA: T_TABLE type table of <table_name>.
DATA: T_TABLEX LIKE TABLE OF t_table.
The result is:
TABLE
FIELD NAME |FIELD1|FIELD2|FIELD3|
 0|--- |--- |--- | <---- No header Line
 1|AA1 |AA2 |AA3 |
 2|BB1 |BB2 |BB3 |
 3|CC1 |CC2 |CC3 |
 4|DD1 |DD2 |DD3 |
 5|EE1 |EE2 |EE3 |
These are work areas:
Tables <table>.
DATA: wa type <table>.
DATA: wa like t_table.
DATA: wa type line of <table>.
The result is:
WORK AREA
|EE1 |EE2 |EE3 | <---- Content
Regards.
Marcelo Ramos

Light orange vertical lines after work area preview

Problem:
               I got this funny problem. When I render the work area I get some strange light orange lines when I playback the rendered video (see the attached image).
Things I tried:
               - Imported this video to an AVCHD 1080i sequence where I edited my full HD video before. After I rendere the work area, no lines everything is clear.
               - On the other hand, when I paste the full HD video on DV - PAL sequence and render it, I get same bloody light orange lines as mentioned above.
Video: Widescreen 16:9, 720h 576v, 25 frames, .mpg. (taken from DV camera before)
Sequence: DV - PAL Widescreen 16:9, 720h 576v, 25 frames
PC: Quad Core, ... enogh for this ****** video, have edited full HD on it without any problems...

No image seen in your post. I'll take a guess anyway. Nvidia card?
If so, go to the Nvidia Control Panel and set the 3D application setting to "Let the 3D application decide".
Jeff
EDIT: I see the images now. My fix should solve it.

Schedule lines and work area

Hi All!
While entering the multiple line items in the sales order(Quotation) screen , at the 60th item the system throws following error message :
System : Schedule lines of Item 000060 is not in Work are.
Has anyone ever came across such message during quotation creation?
Early reply will be appreciated!
Thanks,
Mamata

Hello Sir,
We have the same issue appearing
Item XX for scheduled line XX is in the work area
I am not too sure about the T-Code OQ77 mentioned above. Could you please let me know the reason behind this error as the sales order the error message is appearing is a standard order (Norm Item).
I am not sure how to get rid of this error as it is appearing in a number of sales orders
Thanks in advance for the replies
Regards,
Doss

Internal table with header line and work area.

data:itab like LIKE bapimepoheader.
DATA : BEGIN OF it_po_items OCCURS 0.
        INCLUDE STRUCTURE bapimepoitem.
DATA : END OF it_po_items.
DATA:it_input         TYPE STANDARD TABLE OF typ_input,
      wa_input         TYPE typ_input,
LOOP AT it_input INTO wa_input WHERE poind = 'H'.
CLEAR wa_po_header.
wa_po_header-doc_type = wa_input-bsart.
wa_po_header-comp_code = wa_input-bukrs.
wa_po_header-vendor    = wa_input-lifnr.
CLEAR it_po_items.
it_po_items-po_item = v_itemcount * 10.
it_po_items-acctasscat = wa_input-knttp.
it_po_items-material   = wa_input-matnr.
it_po_items-plant      = wa_input-werks.
it_po_items-quantity   = wa_input-menge.
it_po_items-net_price = wa_input-netpr.
it_po_items-po_unit    = wa_input-meins.
it_po_items-free_item = wa_input-umson.
it_po_items-tax_code   = wa_input-mwskz.
it_po_items-gr_ind     = wa_input-wepos.
it_po_items-gr_non_val = wa_input-weunb.
it_po_items-incoterms1 = wa_input-inco1.
it_po_items-incoterms2 = wa_input-inco2.
it_po_items-vend_mat   = wa_input-idnlf.
it_po_items-taxjurcode = wa_input-txjcd.
it_po_items-item_cat   = wa_input-pstyp.
APPEND it_po_items.
here my doubt is whether i can move data from work area to internal table in this way?
whether this is the correct approach or not?

hii,
u can define structure and make workarea ,internal table using that structure.
for example
types:begin of struct,
         declare all fields,
         end of struct.
data:wa type struct,
       int_tab type standard table of struct.
hope this will help u.

Removing scroll bar from Nav Panel & Work Area layout

Hi Guys,
I have a requirement to remove the scroll bar which appears between nav panel and Work Area in 'Nav Panel and work area layout'.
I would like it to be as a single page as we get in narrow: wide layout.
Well I could just do it by using a narrow:wide layout, but the challenge is I also need the collapse/expand Icon which we get in Nav Panel/WA layout.
I am looking fcor help with either
1. Removing the scroll bar from Nav Panel/WA layout
Or
2. Adding collapse/expand icon to narrow:wide layout.
Thanks,
Yomesh

Hi Yomesh ,
If you want to enable the expand/collapse icon , then you can set the property named Show Tray of the page to yes and then test . By default the property meant for showing the expand/collapse icon is set to yes . You only need to enable the tray and check .
I did not get the requirement that you have with respect to scrollbar . Where is that scrollbar appearing that you want to remove?
Regards
Mayank

Work area VS header line

guyz!
why do we hafta create WORK AREA ??? cant we make use of the header line.
what if we make use of int tabs wid header lines.???
dont say dat performance issue....plzz explain me dat..
Regards
zid.

Hi
When you define an internal table the system arranges a part of memory area in two parts:
- The first one is to stores all records loaded in the table;
- The second one is to store the single record is elaborated,
So when you loop an internal table, the system picks up the record from the first area and puts it to the second one;
The part of memory to store all records is obligatory, so the system'll always create it when an internal table is defined.
The part of memory to store the single record is not necessary, you have to use it only if it needs to read the table: this one is called HEADER LINE or WORK AREA.
So you can decide to declare a table with or without an header line in according to what you need to do.
A) If you need to read the table you need to have a table with header line or work area:
- WITH HEADER LINE
DATA: BEGIN OF ITAB OCCURS 0,
              FIELD1,
              FIELD2,
              FIELD3,
           END    OF ITAB.
LOOP AT ITAB.
WRITE ITAB.
ENDLOOP.
While looping the table the system automatically fills the header line;
- WITH WORK AREA:
DATA: BEGIN OF WA_ITAB,
              FIELD1,
              FIELD2,
              FIELD3,
           END    OF WA_ITAB.
DATA: ITAB LIKE STANDARD TABLE OF WA_ITAB.
LOOP AT ITAB INTO WA_ITAB.
WRITE WA_ITAB.
ENDLOOP.
While looping the table the system automatically fills the work area.
So it can say the header line is a work area the system automatically creates by internal table defination.
It's the same to use the header line or work area, because you need them when you have to read the records of an internal table.
A) If you don't need to read the table, you can define a table without header line:
SELECT-OPTIONS: SO_ERDAT FOR SY-DATUM.
DATA: IT_MATERIAL LIKE MARA-MATNR OCCURS 0.
DATA: IT_MARC LIKE STANDARD TABLE OF MARC WITH HEADER LINE.
SELECT MATNR FROM MARA INTO TABLE IT_MATERIAL WHERE ERDAT IN SO_ERDAT.
IF SY-SUBRC = 0.
SELECT * FROM MARC
        FOR ALL ENTRIES IN IT_MATERIAL WHERE MATNR = IT_MATERIAL.
ENDIF.
LOOP AT IT_MARC.
WRITE IT_MARC.
ENDLOOP.
In this example the internal table IT_MATERIAL is used only to select the data from MARC using the option FOR ALL ENTRIES. This options doesn't use the header line of the table, so it's useless to define a table with an heaader line.
Max

Slow gui redraws in timeline panel

Dual Xeon 2620v2 12 Cores 24 threads
Radeon 290X 4GB / Quadro 5000
SSD Raid 0
64GB RAM
win7 64
ae cc 12.2.1.5
Hi everyone,
After Effects is an absolute pleasure working with and it is one of the most used Softwares in our Animation Studio.
As compositing lead I'd like to ask a performance related question, that would greatly improve our speed.
We work on Workstations, that apart from single core performance are quite fast as I would think. (see above)
Working in the timeline panel with dozents (hundrets) of layers though is quite slow and laggs when the left part (with all the text, blendmodes etc) has to be redrawn.
Interestingly it is not the amount of layers that is crucial: Havin 50 Layers is as slow as having 200 Layers. The amount that is shown slows the redraw down.
Turning off columns eg layer colors, blendmodes, etc speeds up the redraw considerably, but is not an option since its slows or workflow. Decreasing the size of the panel speeds it up considerably, but we need the overview.
Now I would think the graphics cards we have are quite top tier and suspect opengl performance would be the crucial factor here. Though I also read somewhere these redraws are dependent on cpu single-core performance.
My question now is quite simple: I would think redrawing gui or parts of it even if there are lots of texts and buttons on it would be feasable and fast on such systems. Is there something we can do to improve the performance? Loosing parts of seconds and seconds everytime we scroll or click on layers adds up to a lot of time (and ultimately frustration ;-) )
Looking forward to your replies!
Thanks,
Alex

Hi Szalam,
We dont have the cards in the same workstation. I meant we have both type of cards on different systems. Both have the lags.
I am talking about split second lags .. when i scroll up and down for example, it updates the panel every half second or so.
When there are only few layers in the timeline panel it updates it instantaneously and probably dozents of times per second. (selecting, expanding, etc)
Timeline panels refreshing every half second doesnt seem like much of a lag, but makes working on large comps quite unprecise in our experience ;-)
Actually this thread I found states our problem exactly (though no solution):
http://forums.adobe.com/message/5300130
One thing I noticed is that one cpu-core goes up to a hundred percent when scrolling the timeline on large (simple!) comps. Is this the problem, that the updates cant be calculated fast enough by the cpu? We also have workstations with single-core speeds of 3,6ghz, they have the same problem... mh
Thank you!

Internal table & Work area

Hi Experts,
I am a novice to ABAP. Can anyone tell me whats the difference b/w internal table and work area. In writing function modules how these will be utilized and in what way.
Regards
ss

HI,
Internal tables are a standard data type object which exists only during the runtime of the program. They are used to perform table calculations on subsets of database tables and for re-organising the contents of database tables according to users need.
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/content.htm
Difference between Work Area and Header Line
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
e.g.
data: begin of itab occurs 10,
           ab type c,
           cd type i,
        end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
The header line is a field string with the same structure as a row of the body, but it can only hold a single row.
It is a buffer used to hold each record before it is added or each record as it is retrieved from the internal table. It is the default work area for the internal table
1) The difference between
whih header line and with out heater line of internal table.
ex:-
a) Data : itab like mara occurs 0 with header line.
b) Data: itab like mara occurs 0.
-While adding or retrieving records to / from internal table we have to keep the record temporarily.
-The area where this record is kept is called as work area for the internal table.
-The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
-Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
a) Data : itab like mara occurs 0 with header line.
table is with header line
b) Data: itab like mara occurs 0.
table is without header line
2)work area / field string and internal table
which one is prefarable for good performance any why ?
-The header line is a field string with the same structure as a row of the body, but it can only hold a single row , whereas internal table can have more than one record.
In short u can define a workarea of an internal table which means that area must have the same structure as that of internal table and can have one record only.
Example code:
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
http://www.allsaplinks.com/faq_abap_internaltables.html
Do reward if it helps,
Regards,
Laxmi

Doubt in Work Area...

Hi Experts,
I am having doubts in using Work areas. so Please anyone can send me one simple program by using work areas.
what are the uses of work area and where we exactly use the work area.
Thanks & Regards,
Ramana.

Hi,
Using Header Lines as Work Areas
When you create an internal table object you can also declare a header line with the same name. You can use the header line as a work area when you process the internal table. The ABAP statements that you use with internal tables have short forms that you can use if your internal table has a header line. These statements automatically assume the header line as an implicit work area. The following table shows the statements that you must use for internal tables without a header line, and the equivalent statements that you can use for internal tables with a header line:
Operations without header line
Operations with header line
Operations for all Table Types
INSERT <wa> INTO TABLE <itab>.
INSERT TABLE ITAB.
COLLECT <wa> INTO <itab>.
COLLECT <itab>.
READ TABLE <itab> ... INTO <wa>.
READ TABLE <itab> ...
MODIFY TABLE <itab> FROM <wa> ...
MODIFY TABLE <itab> ...
MODIFY <itab> FROM <wa> ...WHERE ...
MODIFY <itab> ... WHERE ...
DELETE TABLE <itab> FROM <wa>.
DELETE TABLE <itab>.
LOOP AT ITAB INTO <wa> ...
LOOP AT ITAB ...
Operations for Index Tables
APPEND <wa> TO <itab>.
APPEND <itab>.
INSERT <wa> INTO <itab> ...
INSERT <itab> ...
MODIFY <itab> FROM <wa> ...
MODIFY <itab> ...
Using the header line as a work area means that you can use shorter statements; however, they are not necessarily easier to understand, since you cannot immediately recognize the origin and target of the assignment. Furthermore, the fact that the table and its header line have the same name can cause confusion in operations with entire internal tables. To avoid confusion, you should use internal tables with differently-named work areas.
Example
The following example shows two programs with the same function. One uses a header line, the other does not.
With header line:
TYPES: BEGIN OF LINE,
 COL1 TYPE I,
 COL2 TYPE I,
 END OF LINE.
DATA ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1
 WITH HEADER LINE.
DO 4 TIMES.
ITAB-COL1 = SY-INDEX.
ITAB-COL2 = SY-INDEX ** 2.
INSERT TABLE ITAB.
ENDDO.
ITAB-COL1 = 2.
READ TABLE ITAB FROM ITAB.
ITAB-COL2 = 100.
MODIFY TABLE ITAB.
ITAB-COL1 = 4.
DELETE TABLE ITAB.
LOOP AT ITAB.
WRITE: / ITAB-COL1, ITAB-COL2.
ENDLOOP.
Without header line:
TYPES: BEGIN OF LINE,
 COL1 TYPE I,
 COL2 TYPE I,
 END OF LINE.
DATA: ITAB TYPE HASHED TABLE OF LINE WITH UNIQUE KEY COL1,
 WA LIKE LINE OF ITAB.
DO 4 TIMES.
WA-COL1 = SY-INDEX.
WA-COL2 = SY-INDEX ** 2.
INSERT WA INTO TABLE ITAB.
ENDDO.
WA-COL1 = 2.
READ TABLE ITAB FROM WA INTO WA.
WA-COL2 = 100.
MODIFY TABLE ITAB FROM WA.
WA-COL1 = 4.
DELETE TABLE ITAB FROM WA.
LOOP AT ITAB INTO WA.
WRITE: / WA-COL1, WA-COL2.
ENDLOOP.
The list, in both cases, appears as follows:
 1 1
 2 100
 3 9
The statements in the program that does not use a header line are easier to understand. As a further measure, you could have a further work area just to specify the key of the internal table, but to which no other values from the table are assigned.
Regards,
Jagadish

Accidentally hit the 'trim comp to work area'. Now I can't get my files back into comp timeline.

I'm using After Effects CC on my macpro. When going to add a shot to the render queue, I accidentally hit the 'trim comp to work area' and didn't notice what had happened until I went to go back to work on other shots. I tried to hit Control Z but it was too late it seemed and it wouldn't go back to how it was. i tried resetting the length of the comp and putting the files back, but no use. Tried making a new comp and copy and pasting all the files in the side panel of my orig comp, but nothing. Tried re-adding the same file from the project window and copying and pasting the effects keyframes from the orig shot to the new one but they didn't line up properly.
I still have all the files in the comp side panel but can't seem to get them back into the now extended timeline. I still have all the effects I've been doing for the past 3 weeks, but can't do anything to get them into a position where I can continue to manipulate them.
I've searched a bunch of forums and can't find this problem anywhere.
Have I lost all my work? Please help.

It appears that you've pushed those layers into negative time, which you can't view in the Timeline. To get the layers back into the Timeline view, you'll need to move the layers in time with keyboard shortcuts. I assume that you've got your layers arranged in an edit, and you want to preserve their relationships, so do the following:
Select all of the layers.
Hold down Alt/Option+Shift and press Page Down until the layers are visible. This shortcut moves layers 10 frames later in time. Removing Shift moves them 1 frame at a time. Using Page Up instead of Page Down will move them earlier in time.
Another useful pair of shortcuts is [ and ], which set the in or out points of the select layer(s) to the current time. But you probably don't want to use those shortcuts in this case because you'll lose the time relationships of your edit.

How can I add a red line below all those words, which are not technically correct? And how can I do Pages to do it automatically?

So, how can I add the red line below all those words, which are not technically correct.
I have tried everything, but nothing works. Red line should come there automatically, but I can't find nothing from settings to do this. Can you guys help me?

There isn't any finnish spellcheck in Pages
Inspector palette = Asetukset
I am trying to find out where to get a finnish dictionary that can work in Pages. I am not sure but try this
http://www.jkwchui.com/2010/03/spellchecking-latex-in-macosx/

Item & for schedule line & is in the work area

Hi All,
We added some custom fields on the schedule line tab and also in VBEP table. For thie same we also added code in the PBO module of SAPMV45A/4500 screen#. Since we added the code we are getting the error message# V1357 with description 'Item 000010 for schedule line 000040 is in the work area'.
I did check the forum and found couple of notes with this error and some replies say that it is for the quality issue. I tried going to OQ77. But i am pretty sure it is because of what i codded. Because When i comment my code so error shows up. But I am not sure what is the problem with my code.
Here is the sample of my code that i wrote in my PBO module:
    IF XVBEP-VBELN IS NOT INITIAL.
        INPUT = MARA-BRGEW * XVBEP-WMENG.
        PERFORM CONVERSION.   "This is the module that i wrote to convert from G to LB.
        XVBEP-ZTOTALWT = OUTPUT.
        xvbep-updkz = 'U'.
        modify xvbep index ivbep-tabix.
    ENDIF.
Please let me know if i am doing wrong anywhere in the code.
Thanks,
Karuna.

Issue: I got the issue resolved. The mistake i made was the local structure was holding last item which has 1 schedule line and the my first item10 was having more than 1 schedule lines and trying to loop all the schedule lines. As the last item has only one schedule line i was getting the problem.
Solution: I reset the structure to that it will loop from the first line item instead of it holding the last item#.
Hope this helps.
Karuna

My clips have a yellow line on the timeline sequence. Does this affect my video quality output if I don't render?

I use Adobe CS 6 to edit and I use Sony NX 3 to record. Every time I import my clips. It has a yellow line on the timeline sequence, even when I make new clip from the sequence.. My question is, does this affect my video quality output if i did not render the yellow line out? Please someone help me

Please see this link for more info about red and yellow bars - http://blogs.adobe.com/premierepro/2011/02/red-yellow-and-green-render-bars.html
If you shoot 1080p, you will likely have better results going to DVD than if you start with 1080i. It's hard enough downscaling with decent quality, then if you add in interlacing issues...
When exporting from Premiere to create a DVD, choose "MPEG-2 DVD" as the format, and then choose a preset such as "NTSC Widescreen Progressive".
There is a checkbox at bottom of export window for "Max Render Quality" - use that for best downscaling results.
Use 2-Pass VBR encoding. Use a bitrate calculator to determine best bitrate for length of movie, or quick option is 560/minutes = bitrate. But don't exceed 8.0 on shorter movies. I typically round down a little for safety margin, such as 560/120 = 4.6, encode at 4.5 and no worries.
The export will result in TWO files, .m2v video and .wav audio, import both into Encore for authoring. Encore will convert the .wav to Dolby AC3, reducing file size. Video should NOT get transcoded. And as others said, don't expect HD quality when viewing a DVD...definitely not HD video any longer. But do be sure to use an upscaling player, this makes all the difference. If you run a yellow composite cable from DVD to TV, it will look horrible. Use HDMI with upscaling DVD/Blu-ray player for improved result.
Good luck
Jeff Pulera
Safe Harbor Computers

Yellow Line below Work Area in Timeline Panel

Similar Messages

Maybe you are looking for