Yoga 3 Pro DirectX/Direct 3D Error

I have a Yoga Pro 3 which routinely crashes a few minutes into Neverwinter game with the following error:
Fatal Error: Direct3D driver returned error code
(DXGI_ERROR_DEVICE_REMOVED) while checking sync query
Technical Details: sync query 0 0x15ddf780   GetData == 0x887a005 0 NF 0
D3D11 Device removed due to E_OUTOFMEMORY 0x8007000e
A printout of DXDIAG is appended below.
Things I have tried:
 - made sure I had the latest video drivers from Intel for the 5300
-  research on the above code suggests that the last driver that would not crash on a particular game was 9.17.10.2932 in December 2012 LINK: https://communities.intel.com/thread/46821  I was not able to install that driver but I was able to roll back to a generic driver from 2006 that seemed to extend time until crash from 5 min to at least an hour.  At some point system put latest Intel driver on again so I dont know if old driver ever crashed.
- installed latest video drivers from Lenovo which are a few months older than the intel drivers even though they were posted later than most recent intel drivers
- worked through several solutions with tech support from Cryptic/Neverwinter which led us both to the conclusion that this is a video driver issue.
Help will be appreciated.
System Information
Time of this report: 12/12/2014, 09:08:16
Machine name: **REDACTED**
Operating System: Windows 8.1 64-bit (6.3, Build 9600) (9600.winblue_r3.140827-1500)
Language: English (Regional Setting: English)
System Manufacturer: LENOVO
System Model: 80HE
BIOS: A6CN38WW
Processor: Intel(R) Processor 5Y70 CPU @ 1.10GHz (4 CPUs), ~1.3GHz
Memory: 8192MB RAM
Available OS Memory: 8108MB RAM
Page File: 5671MB used, 5507MB available
Windows Dir: C:\windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 240 DPI (250 percent)
DWM DPI Scaling: UnKnown
DxDiag Version: 6.03.9600.16384 64bit Unicode
DxDiag Notes
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Input Tab: No problems found.
DirectX Debug Levels
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: Intel(R) HD Graphics 5300
Manufacturer: Intel Corporation
Chip type: Intel(R) HD Graphics Family
DAC type: Internal
Device Type: Full Device
Device Key: Enum\PCI\VEN_8086&DEV_161E&SUBSYS_390617AA&REV_08
Display Memory: 3839 MB
Dedicated Memory: 0 MB
Shared Memory: 3839 MB
Current Mode: 3200 x 1800 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: unknown
Monitor Id: SDC434A
Native Mode: 3200 x 1800(p) (60.000Hz)
Output Type: Internal
Driver Name: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Driver File Version: 10.18.0010.3960 (English)
Driver Version: 10.18.10.3960
DDI Version: 11.1
Feature Levels: 11.1,11.0,10.1,10.0,9.3,9.2,9.1
Driver Model: WDDM 1.3
Graphics Preemption: Triangle
Compute Preemption: Thread group
Miracast: Supported
Hybrid Graphics GPU: Integrated
Power P-states: Not Supported
Driver Attributes: Final Retail
Driver Date/Size: 10/3/2014 17:36:50, 24185400 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B78E66-555E-11CF-627B-0C19B5C2C735}
Vendor ID: 0x8086
Device ID: 0x161E
SubSys ID: 0x390617AA
Revision ID: 0x0008
**OMITTED for BREVITY***
D3D9 Overlay: Supported
DXVA-HD: Supported
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
Sound Devices
Description: Speakers (Realtek High Definition Audio)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0286&SUBSYS_17AA3800&REV_1000
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.7324 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 8/19/2014 05:33:30, 4026840 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Basic
Cap Flags: 0xF1F
Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
Description: Microphone (Realtek High Definition Audio)
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: RTKVHD64.sys
Driver Version: 6.00.0001.7324 (English)
Driver Attributes: Final Retail
Date and Size: 8/19/2014 05:33:30, 4026840 bytes
Cap Flags: 0x1
Format Flags: 0xFFFFF
Video Capture Devices
Number of Devices: 1
FriendlyName: Lenovo EasyCamera
Location: Front
SymbolicLink: \\?\usb#vid_5986&pid_0535&mi_00#6&3b1986b&0&0000#{e5323777-f976-4f5b-9b55-b94699c46e44}\global
Manufacturer: Generic
HardwareID: USB\VID_5986&PID_0535&REV_3653&MI_00,USB\VID_5986&PID_0535&MI_00
DriverDesc: Lenovo EasyCamera
DriverProvider: Realtek
DriverVersion: 6.3.9600.11057
DriverDateEnglish: 8/30/2014 00:00:00
DriverDateLocalized: 8/30/2014 12:00:00 AM
Service: rtsuvc
Class: Image
DevNodeStatus: 180200A[DN_DRIVER_LOADED|DN_STARTED|DN_DISABLEABLE|DN_NT_ENUMERATOR|DN_NT_DRIVER]
ContainerId: {00000000-0000-0000-FFFF-FFFFFFFFFFFF}
ProblemCode: No Problem
BusReportedDeviceDesc: Lenovo EasyCamera
Parent: USB\VID_5986&PID_0535\200901010001
DriverProblemDesc: n/a
UpperFilters: n/a
LowerFilters: n/a
Stack: \Driver\ksthunk,\Driver\rtsuvc,\Driver\ACPI,\Driver\usbccgp
ContainerCategory: Imaging.Webcam
DirectInput Devices
Device Name: Mouse
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Keyboard
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: USB Receiver
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC52B
FF Driver: n/a
Device Name: USB Receiver
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC52B
FF Driver: n/a
Device Name: USB Receiver
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC52B
FF Driver: n/a
Device Name: USB Receiver
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC52B
FF Driver: n/a
Device Name: USB Receiver
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC52B
FF Driver: n/a
Device Name: USB Receiver
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x046D, 0xC52B
FF Driver: n/a
Device Name: HIDI2C Device
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x06CB, 0x2714
FF Driver: n/a
Device Name: UMDF HID minidriver Device
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0xBEEF, 0xFEED
FF Driver: n/a
Device Name: ITE Device(8386)
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x048D, 0x8386
FF Driver: n/a
Device Name: HIDI2C Device
Attached: 1
Controller ID: 0x0
Vendor/Product ID: 0x03EB, 0x8A10
FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
 **INFO OMITTED FOR BREVITY**

I have a similar issue with my Yoga 3 Pro. I play Runescape with the desktop client, which is Java based. I regularly encounter driver crashes. Every time this happens, the driver recovers, but it causes the game to go black for about a second or two. I have also noticed that Amazon Instant Video performs badly, especially in HD and to a much lesser extent when playing in SD. Netflix seems to play fine, as does Youtube in HTML5. I have the latest driver.

Similar Messages

  • Can't download files on Yoga Pro 2

    I've had my Yoga Pro 2 for a couple weeks.  It's been downloading fine until today when I was trying to download (using Firefox 31.0) an installer, I got an error that said the "*.msi.part could not be saved, because the source file could not be read."  This also happened when I tried to download (same browser) an mp3 file I had stored on my Box.com account.  I have been adjusting/disabling/uninstalling a lot of stuff.  I don't know if I did something that made this happen or if it's something in the browser. I don't think it's the browser, however, because I unsuccessfully tried the same process with IE, also.  Any idea what's causing this?
    Link to picture
    Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums
    Solved!
    Go to Solution.

    Have you tried resetting the Winsock?
    Click Start. click run, type: cmd, and press CTRL+SHIFT+Enter
    Type: netsh winsock reset, and then press the ENTER key.
    Type: Exit and press ENTER.
    Restart the computer. Test the connection. Let me know how it goes.
    Hoov
    Microsoft MVP - Consumer Security
    SpywareHammer.com

  • Urgent : Premiere Pro has encountered an error

    Bonjour,
    Depuis plusieurs jours nous sommes nombreux à être confrontés à un bug Adobe très critique. Lors de la réouverture d'un projet, Premiere plante et affiche les messages d'erreur suivants :
    "Premiere Pro has encountered an error.
    f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe "
    Puis :
    "Impossible de charger le projet. Celui-ci est sans doute endommagé ou contient des éléments obsolètes."
    Le fichier .prproj est irrémédiablement endommagé et devient irrécupérable, quelle que soit la machine, l'OS (Win 7, 8 ou 8.1) ou la version Adobe utilisée (CS ou CC). Les fichiers auto-save sont également inutilisables. Ce bug apparu assez brutalement fin septembre pourrait être lié à une update Windows affectant le système décimal. Pour autant, des bugs similaires assez anciens semblent déjà documentés dans les forums en anglais, mais aucune réponse claire n'est apportée par Adobe.
    De nombreux utilisateurs, dont je fais partie, ont engagé des projets à caractère professionnel et se trouvent bloqués depuis plusieurs jours. Les exports EDL voire XML Final Cut sont trop partiels ou inadaptés à une récupération intégrale.
    Un forum en anglais traite du sujet, mais rien n'avance.
    Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe
    J'observe qu'un site web propose la réparation des fichiers .prproj endommagés pour 250$ Recovery for Adobe Premiere Projects with Error "MediaFoundation/API/Inc/Keyframe" ce qui suggère que le bug est connu. Pourquoi Adobe ne réagit-il pas ? De toutes façons, un projet même reconstitué redevient corrompu dès sa fermeture-réouverture, tant que le bug n'est pas fixé par Adobe.
    Si vous avez rencontré cette erreur ou si vous avez une solution, merci de votre aide !
    Gilles
    Windows 7 Home 64 bits
    Adobe Creative Suite CS6

    Voir forum anglais
    Des solutions proposées pour recup fichiers endommagés
    Jean-Claude RICHARD
    Mobile : 07 50 52 01 52
    [email protected]
    Le 8 oct. 2014 à 18:36, gnicolen <[email protected]> a écrit :
    Urgent : Premiere Pro has encountered an error
    created by gnicolen in Forums en français - View the full discussion
    Bonjour Gilles,
    Je suis dans le même cas depuis hier, je ne sais pas comment faire. J'ai CS6 (non CC)
    Dans mes 5 sauvegardes auto, je peux ouvrir les 4 plus anciennes. hier 11h29, 11h49, 14h30,15h30. la plus récente 18h54, et le projet sont en erreur.
    En ouvrant 1 sauvegarde ancienne, l'apparence de l'espace de travail est altéré : pistes video non affichées mais non perdues, fenêtre styles de titres  anormale.
    Si j'ouvre un projet ancien de quelques mois, l'apparence de l'espace de travail est altérée.
    Visiblement, il s'est produit quelque chose dans mon PC hier après 15h30. Je n'ai pas le souvenir d'avoir fait quelque chose de particulier, pas d'update Windows, pas d'erreur système ...
    J'ai utilisé LightRoom 5.
    C'est énervant.
    J'ai lu les posts sur le forum en Anglais ... essayé le' pp repair' sans succès.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6804683#6804683
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Forums en français by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Trouble with Adobe Reader Touch on Lenovo Yoga Pro 2 in tablet mode. Pdf shows up as blank pages.

    I have a Lenovo Yoga Pro 2 and when I change it to tablet mode and use the Adobe Reader Touch app, my pdf shows up as a blank page. I have installed other pdfs in the past and those show up fine. However, as of three days ago, whatever pdf I install shows up as blank on my screen. Is there a solution to fix this?

    Could you please share your test file?
    You can send the file at [email protected]

  • What type of ssd does yoga pro 3 have?

    Is it MLC or TLC? I heard people say yoga pro 3 uses sumsung SSD, and sumsung like using TLC which i dont prefer.

    Samsung or LITE-ON, per the Hardware Maintenance Manual:
    http://download.lenovo.com/consumer/mobiles_pub/lenovo_yoga_3_pro_1370_hmm.pdf
    I don't work for Lenovo. I'm a crazy volunteer!

  • After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

    After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
    VIBAC

    I downloaded and installed
    OS X Lion 10.7.5 Supplemental Update
    and that solved my problem completely. (368 AU plugins now works!)

  • When I try to save a form as "Reader Extended PDF" in Acrobat Pro, I get an error message "This document could not be reader enabled".

    Hello,
    When I try to save a form as “Reader Extended PDF” in Acrobat Pro, I get an error message “This document could not be reader enabled”.
    The steps I’m following are described below:
    1.    Insert electronic signatures
    - In Tasks, click on “Add New Field -> Digital Signature”.
    - Move the square to the place where you want to put the signature and click.
    - Fill in the “field name” with the name of the person who has to sign here.
    - When it is done, click anywhere on the screen.
    - In Tasks, click on “Close Form editing”.
    - Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
    - Fill in the file name and click on “Save”.
    2.    Save the Form
    - In Tasks, click on “Close Form editing”.
    - Go to menu “File -> Save as -> Reader Extended PDF ->Enable additional features”, click on “Save now”.
    - Fill in the file name and click on “Save”.
    I am using Adobe Acrobat Pro 10.0.0 on a W7 workstation
    Here's a screenshot of the problem.
    Thanks a lot.
    Gael

    Read the user manual that came w/the scanner and/or contact HP Support.
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    A scanner driver you may wish to consider:  VueScan Scanner Software

  • Yoga Pro 3 - Wifi dropped connections; refuses to reconnect

    First day of owning my Yoga Pro 3. Has anyone experienced intermittent wifi failures?
    I've had trouble on both access points that I have at home. One is an older 802.11b router (set to channel 1), and other a D-Link815 dual-band bgn router (with the 2.4Ghz radio set to channel 11). 
    I've experienced problems using both routers on either channel and when using the 5Ghz spectrum as well.
    Connectivity with either access point lasts from 5 mins to 30+ mins (in limited time I had available to use it so far).
    Far more frustrating is that when dropped, the YP3 refuses to reconnect. Manually selecting the access point in the network connections charm and clicking "Connect" results in failed attempts at connecting and system will refuse to connect to any Access Point for a random amount of time. At one point I had attempted to reconnect about 20+ times before it did reconnect.
    Obviously, tried rebooting without any change in behavior.
    I uninstalled the Broadcom wireless driver (the system the auto-installed a Microsoft driver which, from the version number, appeared to be an older version of the same Broadcom driver as they used a very similar numbering scheme and were very close). No change. I reverted that change.
    Are there known issues with these wifi cards/drivers accessing open wifi connections? I live in the middle of no-where, so have had no compelling reason to secure the access points.
    What else should I try?
    Thanks

    My WiFi connects fine @ 2.4 GHz only Access Point (netgear wnr2000 v2) 4 rooms away (~ 35 feet and my Linksys router is on the same room as me so I get 866.5 Mbps all the time), giving me fluctuating connection speed from 243 to 300 Mbps. I generally don't use the 2.4 GHz band but I occasionally try it to check for stability. It's working fine but there's too much 2.4 GHz clients in our area so I use 5 GHz for Netflix, Hulu steaming where low latency stability is needed.
    Definitely try reseating the antenna so you can rule that out. If you still can't connect @ 2.4 GHz, try other 2.4 Ghz access points or it's just that you get a defectve Broadcom 4352 card or it might be even Windows 8.1 drivers itself.
    Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

  • When Exporting "Adobe Premiere Pro sorry, A serious Error has accord that requires....."

    Since the new update when Exporting I get this message ""Adobe Premiere Pro sorry, A serious Error has accord that requires....." I've tried to reinstall the software on both computer without any luck. Please Help!

    Premiere worked before.
    I’m not using any third party effects or codecs.
    MAC
    Processor  3.4 GHz Intel Core i7
    Memory  24 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GTX 680MX 2048 MB
    Software  OS X 10.9.1 (13B42)
    Adobe Premiere Pro CC Version 7.2.1(4)
    When I press EXPORT I get this message "Adobe Premiere Pro sorry, A serious Error has accord that requires....."

  • Ready to install fresh win 8.1 on new Yoga Pro 2

    So, I just got my yoga pro 2 Friday. Can't stand the extra stuff and 7 particians. 
    I've got a usb stick with a copy of win 8.1 on it. I can boot to it and get the windows installer started ( I stopped at the partiican table)
    I got the drivers folder from the D: on the yoga backed up.
    Got my win 8.1 pro product key written down.
    Don't think I will need any of the lenovo apps.
    Nothing else I need, right?  I did actually make a system image of the fresh install on another external drive when I got it, so if i did need to go back, I can.
    The windows installer will take care of all partiicans, correct? I'm new to EUFI boot.  I can see that legacy mode is disabled in the bios now.
    Thanks for any help. Looking forward to a clean install.  Wish I could have gotten this from a MIcrosoft store instead so I don't have to deal with it.
    Solved!
    Go to Solution.

    seems you're already ready.

  • On My Mac Pro Getting an unknown error message when trying to update apps

    On My Mac Pro Getting an unknown error message when trying to update apps To Perchase Mountain Lion

    Try signing out of your account, restart the iPad and then sign in again and see if that works for you.
    Settings>Store>Apple ID - tap your ID and sign out.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Sign in again -Settings>Store>Apple ID - sign in.
    If that doesn't work either, reset your iPad and see if that helps.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • When trying to sync my iPhone with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device".  How to I adjust the access privileges??

    When trying to sync my iPhone/iPad with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device".  How to I adjust the access privileges?

    Hello magestecal,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where you're getting a permissions error when trying to sync your iPhone, I'd like you to please follow the steps in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Take care,
    Alex H.

  • HT1338 MacBook Pro 10.6.8 error 2008 cannot empty trash. Any new solution?

    MacBook Pro 10.6.8 error 2008 cannot empty trash. Any new solution?

    Okay.   Try Googling Macbook error 8003.   Item1 and others below it relate to that error.

  • Premiere Pro has encountered an error.  CS6

    Dear Adobe Community
    I would be grateful for some help as Premiere Pro has begun crashing on me.
    I am using CS6 - on two different Mac computers that both encounter the same problem.  I am making a film 1920 x 1080 made up of almost 60 smaller films of 180 x 180 pixels with a color matte underneath them.  Everything had been going fine and I was able to export three different versions of the film.  Now unfortunately it no longer works!
    Using the same process, that I used before that worked successfully, I select all the elements of the timeline and try and nest them.  At this point I get the following error message:
    Premiere Pro has encountered an error.
    .  [/Volumes/BuildDisk/builds/tightykilt/shared/adobe/MediaCore/Backend/Make/Mac/../../Src/S equence/LinkContainer.cpp-245]           Continue
    On pressing Continue - it "quit unexpectedly".
    I've tried using a different Mac and have the same problem.
    I tried slim lining the project to just the assets that I'm using, saving and rendering and saving and it still keeps on crashing like this.
    I would be grateful for any help or advice.
    Thank you very much!

    Which operating system?
    Yosemite sometimes has problems, often related to "default" permissions needing to be changed
    -one person's solution https://forums.adobe.com/thread/1689788
    -and a Java update https://forums.adobe.com/thread/1507936
    -update may break things https://forums.adobe.com/thread/1772260

  • Premiere Pro has encountered an error - nothing seems to fix it!

    Hey all,
    I'm running Premiere Pro v. 6.0.2 on Mountain Lion 10.8.2, with a standard ATI Radeon 5770 in a 3.33 GHz 6-Core Mac Pro 5,1.
    Whenever I try to open the program OR a file, I get the following message:
    "Premiere Pro has encountered an error.
    [/Volumes/BuildDisk/builds/slightlybuilt/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/.. /../Src/DirectoryRegistry.cpp-283]"
    The strangest thing is that I just used Premiere yesterday, and after quitting it last night, tried to open the same file and got this message. I thought maybe the file was corrupted but I get the message just by launching without even opening via a project file. I then updated from 10.8.1 to 10.8.2 in the hopes that something internally might get fixed and it did not rememdy the problem. I have been scouring forums and most have pointed to resetting the permissions in the Home folder which I did both through Terminal and the "resetpassword" Repair Utility method. It still won't open! This has been very frustrating and I would greatly appreciate any advice to get this sorted out.
    As a side note, whenever I open After Effects (11.0.1), it "unexpectedly quits" without an error log. I was also able to open this at least since I've had Mountain Lion, although I did not use it as recently as Premiere.
    I appreciate any help and please let me know if you need any more information. Thank you!

    I'm not a Mac user so I can't offer much advice other than to recommend uninstalling everything and using the adobe cleaner utility after the uninstall is completed. Then re-install everything, hopefully that should fix the problem. Sorry I don't have any info on what actually caused the issue though. But I'm going to assume that something has obviously gotten corrupted somehow. I honestly think that uinstalling is probably going to be the easiest solution here.
    Here is a link to the cleaner utlity.
    http://www.adobe.com/support/contact/cscleanertool.html

Maybe you are looking for