Yosemite Filesystem Issue
13' 2013 MBP
I've had yosemite installed for several weeks and working without any issues. Today, it said it needed to restart to do an update. I performed the update and then after rebooting and logging in the system hangs at 50%.
If I boot with the command + v option, we get a few notable errors:
Checking catalog file.
Incorrect number of thread records
(4, 25886)
Checking multi-linked files.
Checking catalog hierarchy.
Invalid volume file count
(It should be 1294540 instead of 1294538)
Checking extended attribute file.
Checking volume bitmap.
Checking volume information.
Repairing volume.
Rechecking volume.
Checking Journaled HFS Plus volume.
The volume name is Macintosh HD
Checking extends overflow file.
Incorrect number of thread records
(4, 25886)
And it just kind of repeats. I've tried rebooting into recovery console (command + r). From here, if I run disk utility it doesn't report any errors. If I fsck -yf again it doesn't report any errors.
Any help would be appreciated.
Thanks
After attempting command + s and several other repair options, I'm now just having to do a complete wipe and re-install. A bit of a pain, but hopefully this will work...
Similar Messages
-
G DRIVE won't mount! is Yosemite the issue?
Hi all. So I'm trying to mount my 2TB thunderbolt g drive on my iMac 5k (OS X Yosemite), and it just won't mount. It doesn't even show up in disk utility.
I know the drive probably is not the issue, because I tried it out on my macbook pro (OS X Mavericks), and it mounted instantly. Is Yosemite the issue with this? Has anyone else run into these problems??Do you have another Thunderbolt drive that you can use (or borrow) to make sure the Thunderbolt port on your iMac 5K works?
-
This is yet another Yosemite speed issue. I've done some reading around and read the FileVault can cause an issues, I took a look and I've always have FileVault disabled. I installed EtreCheck and the results came up with a lot of RED and "FAILED". Unfortunately, I have no clue how to being to read this and was hoping someone could shed some light onto this for me.
Here are my results: (Just trying to right-click and paste this took almost a minute)
Problem description:
Installed OS X Yosemite and now Macbook runs extremely slow. I have had FileVault disabled the entire time.
EtreCheck version: 2.0.11 (98)
Report generated November 13, 2014 at 12:26:09 PM EST
Hardware Information: ℹ️
MacBook (13-inch, Late 2009) (Verified)
MacBook - model: MacBook6,1
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 23:21:15
Disk Information: ℹ️
TOSHIBA MK2555GSXF disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 249.20 GB (143.68 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.devguru.driver.SamsungComposite (1.4.25 - SDK 10.6) Support
/System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
[not loaded] com.devguru.driver.SamsungACMControl (1.4.25 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungACMData (1.4.25 - SDK 10.6) Support
[not loaded] com.devguru.driver.SamsungMTP (1.4.25 - SDK 10.5) Support
[not loaded] com.devguru.driver.SamsungSerial (1.4.25 - SDK 10.6) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cloudd.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.gamed.plist
[failed] com.apple.Maps.pushdaemon.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
[failed] com.apple.xpc.loginitemregisterd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.findmymac.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.systemstats.analysis.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist Support
User Login Items: ℹ️
smcFanControl Application (/Applications/smcFanControl.app)
Dropbox Application (/Applications/Dropbox.app)
Mail Application (/Applications/Mail.app)
KiesAgent ApplicationHidden (/Applications/Kies.app/Contents/MacOS/KiesAgent.app)
fuspredownloader ApplicationHidden (/Users/[redacted]/Library/Application Support/.FUS/fuspredownloader.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
Default Browser: Version: 600 - SDK 10.10
npTGEQPlugin: Version: 7.5.1 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.223
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 Support
AdobePDFViewer: Version: 9.5.5 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
ATTConnectEventEntry: Version: 1.0.0 - SDK 10.6
fbplugin_1_0_1: Version: (null) Support
Safari Extensions: ℹ️
Searchme
Slick Savings
Amazon Shopping Assistant
Ebay Shopping Assistant
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 249.20 GB Disk used: 105.52 GB
Destinations:
Time Machine Backups [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 105.52 GB X 3)
Top Processes by CPU: ℹ️
3% Google Chrome
2% WindowServer
1% coreaudiod
0% airportd
0% smcFanControl
Top Processes by Memory: ℹ️
84 MB Google Chrome Helper
79 MB Google Chrome
43 MB Finder
39 MB mds
32 MB Mail
Virtual Memory Information: ℹ️
79 MB Free RAM
571 MB Active RAM
447 MB Inactive RAM
385 MB Wired RAM
46.88 GB Page-ins
1.25 GB Page-outsUninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
1. AppZapper
2. AppDelete
3. Automaton
4. Hazel
5. AppCleaner
6. CleanApp
7. iTrash
8. Amnesia
9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software. -
New V245 Filesystem Issue - I/O error
I just purchased a V245 with Solaris 10 preloaded. I fired my new server up to experience a filesystem issue and it will not boot normally. I don't see a mount directory for /export/home, /var and where is slice 5? Please help.
WARNING - Unable to repair the /var filesystem. Run fsck
manually (fsck -F ufs /dev/rdsk/c0t0d0s5).
# fsck -Y -F ufs /dev/rdsk/c0t0d0s5
Can't open /dev/rdsk/c0t0d0s5: I/O error
# cat /etc/vfstab
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
/devices - /devices devfs - no -
/proc - /proc proc - no -
ctfs - /system/contract ctfs - no -
objfs - /system/object objfs - no -
fd - /dev/fd fd - no -
swap - /tmp tmpfs - yes -
/dev/dsk/c0t0d0s0 /dev/rdsk/c0t0d0s0 / ufs 1 no -
/dev/dsk/c0t0d0s5 /dev/rdsk/c0t0d0s5 /var ufs 1 yes -
/swapfile - - swap - no -
bash-3.00# prtvtoc /dev/rdsk/c0t0d0s0
* /dev/rdsk/c0t0d0s0 partition map
* Dimensions:
* 512 bytes/sector
* 424 sectors/track
* 24 tracks/cylinder
* 10176 sectors/cylinder
* 14089 cylinders
* 14087 accessible cylinders
* Flags:
* 1: unmountable
* 10: read-only
* Unallocated space:
* First Sector Last
* Sector Count Sector
* 26681472 12292608 38974079
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 0 00 4151808 22529664 26681471 /
1 0 00 50880 4100928 4151807
2 5 00 0 143349312 143349311
3 0 00 38974080 104375232 143349311
7 0 00 0 50880 50879
Edited by: xc0de on Sep 14, 2007 4:06 PMWere you able to resolve this issue? I have the same machine -- V245, Solaris 10 -- which is exhibiting the same behaviour.
-
Imac 24" - 2008 with yosemite - bluetooth issue?
Hello everyone,
My computer was working fine after downloading yosemite, but all of the sudden (I haven't installed any software or hardware prior to this issue)
I have received this panic report a couple of times after attempting to run a diagnostic by holding "D" (it didn't work)
The reason why I tried running this diagnose is because my bluetooth is out of commission and my booting time is anywhere from 2.5 - 5 minutes.
I'm able to see the bluetooth icon, but i cannot turn it off or pair to anything. I have deleted the plist file and I also did the "pvram" (spelling) and another reset and didn't work.
could someone take a look at this report and Hopefully shed some light on the issue?
Anonymous UUID: 11148661-2396-E316-84B1-55BF590756C8
Sun Jan 18 23:45:45 2015
*** Panic Report ***
panic(cpu 1 caller 0xffffff801ac1e80a): Kernel trap at 0x00007fff8e908610, type 6=invalid opcode, registers:
CR0: 0x000000008001003b, CR2: 0x00007fff731fd408, CR3: 0x0000000136309000, CR4: 0x0000000000002660
RAX: 0xc0ab0b91f8c10000, RBX: 0xffffff802731e200, RCX: 0xffffff8026823800, RDX: 0xffffff80ad93b940
RSP: 0xffffff80ad93b7f8, RBP: 0xffffff80ad93b900, RSI: 0x0000000000000000, RDI: 0xffffff8026817800
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x0000000645515f8a, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0x0000000000000000, R14: 0xffffff801b310688, R15: 0xffffff8026817800
RFL: 0x0000000000010246, RIP: 0x00007fff8e908610, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x00007fff731fd408, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80ad93b4a0 : 0xffffff801ab3a811
0xffffff80ad93b520 : 0xffffff801ac1e80a
0xffffff80ad93b6e0 : 0xffffff801ac3a443
0xffffff80ad93b700 : 0x7fff8e908610
0xffffff80ad93b900 : 0xffffff7f9bced6fd
0xffffff80ad93ba90 : 0xffffff7f9bd180e0
0xffffff80ad93bb00 : 0xffffff801b0d8008
0xffffff80ad93bb60 : 0xffffff7f9bd17daf
0xffffff80ad93bbc0 : 0xffffff801b100003
0xffffff80ad93bd00 : 0xffffff801abea517
0xffffff80ad93be10 : 0xffffff801ab3e91c
0xffffff80ad93be40 : 0xffffff801ab235a3
0xffffff80ad93be90 : 0xffffff801ab33e8d
0xffffff80ad93bf10 : 0xffffff801ac0a142
0xffffff80ad93bfb0 : 0xffffff801ac3ac66
Kernel Extensions in backtrace:
com.apple.iokit.IOBluetoothFamily(4.3.1f2)[EA7803C3-7DB8-37C5-AD58-4195833A2612 ]@0xffffff7f9bce7000->0xffffff7f9bd90fff
dependency: com.apple.iokit.IOReportFamily(31)[781C9DD1-4CE9-3AEB-85EA-D420CEC18916]@0xffff ff7f9bb28000
BSD process name corresponding to current thread: blued
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x000000001a800000
Kernel text base: 0xffffff801aa00000
__HIB text base: 0xffffff801a900000
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 26922901775
last loaded kext at 26814245558: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7f9c27a000, size 32768)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.1f2
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDAHardwareConfigDriver 267.0
com.apple.driver.AppleHDA 267.0
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.kext.AMDFramebuffer 1.2.8
com.apple.iokit.IOBluetoothUSBDFU 4.3.1f2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleMuxControl 3.7.21
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.ATIRadeonX2000 10.0.0
com.apple.kext.AMD2600Controller 1.2.8
com.apple.driver.AppleIRController 327.5
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AirPortBrcm43224 700.36.24
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.iokit.AppleYukon2 3.2.3b1
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 267.0
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.1f2
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOSurface 97
com.apple.iokit.IOBluetoothFamily 4.3.1f2
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleHDAController 267.0
com.apple.iokit.IOHDAFamily 267.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.kext.AMDSupport 1.2.8
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleUSBHIDKeyboard 175.5
com.apple.driver.AppleHIDKeyboard 175.5
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IO80211Family 700.52
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOATAFamily 2.5.3
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 2.8 GHz, 4 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 800 MHz, 0x7F7F7F7F7F9B0000, 0x4354323536363441433830302E4B31364600
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 800 MHz, 0x7F7F7F7F7F9B0000, 0x4354323536363441433830302E4B31364600
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.3.1f2 15015, 3 services, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: WDC WD3200AAJS-40VWA1, 320.07 GB
Parallel ATA Device: OPTIARC DVD RW AD-5630A
USB Device: Built-in iSight
USB Device: Keyboard Hub
USB Device: USB Receiver
USB Device: Apple Keyboard
USB Device: IR Receiver
USB Device: BRCM2046 Hub
Thunderbolt Bus:I have a different prolem - my Apple Wireless Keyboard will not connect. This started after the latest update installation. After "removing" the device (in Bluetooth Preferences), it will find the keyboard, but will not pair with it.
Any suggestions, anyone???
MacPro (late 2013), OS-X 10.10.1 -
OS X Yosemite RAM Issues - kernel_task
Hello,
Looks like I have a memory leak somewhere. I'm unable to pin it down. My kernel_task is taking too much memory and it force yosemite to kill window manager, not a good thing
Can you help me out? I'm really considering a roll back to maverick, but before doing this maybe there's hope to fix this for good..
I also removed cleanmymac as I was requested in other thread of people having same issue.
EtreCheck version: 2.1.8 (121)
Report generated February 18, 2015 at 11:18:57 AM GMT-5
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (Retina, 15-inch, Late 2013) (Technical Specifications)
MacBook Pro - model: MacBookPro11,2
1 2 GHz Intel Core i7 CPU: 4-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Battery Health: Normal - Cycle count 92
Video Information: ℹ️
Intel Iris Pro
Color LCD spdisplays_2880x1800Retina
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 7 days 20:41:7
Disk Information: ℹ️
APPLE SSD SM0256F disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 249.78 GB (32.42 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt to Gigabit Ethernet Adapter
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/VMware Fusion.app
[loaded] com.vmware.kext.vmci (90.6.3) [Click for support]
[loaded] com.vmware.kext.vmioplug.14.1.3 (14.1.3) [Click for support]
[loaded] com.vmware.kext.vmnet (0249.89.30) [Click for support]
[loaded] com.vmware.kext.vmx86 (0249.89.30) [Click for support]
[loaded] com.vmware.kext.vsockets (90.6.0) [Click for support]
/Library/Application Support/Fortinet/FortiClient/nke
[not loaded] com.fortinet.fct.kext.avkern (1.0.1 - SDK 10.8) [Click for support]
[not loaded] com.fortinet.fct.kext.fctapnke (1 - SDK 10.8) [Click for support]
[not loaded] com.fortinet.fct.kext.fctwfnke (1.0 - SDK 10.8) [Click for support]
[not loaded] com.fortinet.kext.fctrouternke (1 - SDK 10.8) [Click for support]
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.10) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.10) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.10) [Click for support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.10) [Click for support]
/Library/Extensions
[loaded] com.driver.LogJoystick (2.0 - SDK 10.9) [Click for support]
[not loaded] com.keyspan.iokit.usb.KeyspanUSAdriver (1 - SDK 10.9) [Click for support]
[not loaded] com.logitech.driver.LogiGamingMouseFilter (1 - SDK 10.9) [Click for support]
/System/Library/Extensions
[loaded] com.protech.NoSleep (1.4.0 - SDK 10.10) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.sbd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[running] com.paragon.NTFS.notify.plist [Click for support]
2 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.wdhelper.plist
10 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.bjango.istatmenusagent.plist [Click for support]
[running] com.bjango.istatmenusnotifications.plist [Click for support]
[loaded] com.citrix.AuthManager_Mac.plist [Click for support]
[running] com.citrix.ReceiverHelper.plist [Click for support]
[running] com.citrix.ServiceRecords.plist [Click for support]
[loaded] com.fortinet.forticlient.fssoagent_launchagent.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[unknown] com.oracle.java.Java-Updater.plist [Click for support]
[loaded] com.paragon.updater.plist [Click for support]
[running] com.teamviewer.teamviewer.plist [Click for support]
[running] com.teamviewer.teamviewer_desktop.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.bjango.istatmenusdaemon.plist [Click for support]
[failed] com.fortinet.forticlient.appfw.plist [Click for support]
[loaded] com.fortinet.forticlient.epctrl.plist [Click for support]
[loaded] com.fortinet.forticlient.fmon.plist [Click for support]
[not loaded] com.fortinet.forticlient.fssoagent_launchdaemon.plist [Click for support]
[loaded] com.fortinet.forticlient.servctl.plist [Click for support]
[loaded] com.fortinet.forticlient.vpn.plist [Click for support]
[loaded] com.fortinet.forticlient.wf.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[unknown] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.paragon.ntfs12.refresh.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[running] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
[not loaded] org.virtualbox.startup.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[failed] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support] [Click for details]
[failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support] [Click for details]
[failed] com.spotify.webhelper.plist [Click for support] [Click for details]
[not loaded] org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
NoSleep Application (/Applications/Utilities/NoSleep.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
Logitech Gaming Software Application Hidden (/Applications/Logitech/Logitech Gaming Software.app)
FortiClientAgent Application (/Applications/FortiClient.app/Contents/Resources/runtime.helper/FortiClientAge nt.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
VMwareClientSupportPlugin55: Version: VMwareClientSupportPlugin 5.5.0.41167 [Click for support]
CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 [Click for support]
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Unknown Check version
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
NoSleep [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
8% WindowServer
1% Google Chrome
0% fontd
0% LastPass
0% hidd
Top Processes by Memory: ℹ️
155 MB Google Chrome
119 MB Google Chrome Helper
94 MB mds_stores
43 MB mds
43 MB Spotlight
Virtual Memory Information: ℹ️
99 MB Free RAM
2.75 GB Active RAM
2.22 GB Inactive RAM
2.66 GB Wired RAM
66.65 GB Page-ins
3.93 GB Page-outs
Diagnostics Information: ℹ️
Feb 18, 2015, 11:13:39 AM /Library/Logs/DiagnosticReports/vmware-vmx_2015-02-18-111339_[redacted].crash
Feb 5, 2015, 08:58:41 PM /Library/Logs/DiagnosticReports/Kernel_2015-02-05-205841_[redacted].panic [Click for details]
Feb 18, 2015, 10:52:59 AM /Library/Logs/DiagnosticReports/loginwindow_2015-02-18-105259_[redacted].crashHello greg, I uninstalled cleanmymac and forticlient( even if I need it). Nosleep is very useful to prevent my mac to drop all my rdp connections. Here's a new etrecheck output to confirm my clean up:
EtreCheck version: 2.1.8 (121)
Report generated February 18, 2015 at 1:02:20 PM GMT-5
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (Retina, 15-inch, Late 2013) (Technical Specifications)
MacBook Pro - model: MacBookPro11,2
1 2 GHz Intel Core i7 CPU: 4-core
8 GB RAM Not upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Battery Health: Normal - Cycle count 92
Video Information: ℹ️
Intel Iris Pro
Color LCD spdisplays_2880x1800Retina
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 7 days 22:24:33
Disk Information: ℹ️
APPLE SSD SM0256F disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 249.78 GB (31.79 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/VMware Fusion.app
[loaded] com.vmware.kext.vmci (90.6.3) [Click for support]
[loaded] com.vmware.kext.vmioplug.14.1.3 (14.1.3) [Click for support]
[loaded] com.vmware.kext.vmnet (0249.89.30) [Click for support]
[loaded] com.vmware.kext.vmx86 (0249.89.30) [Click for support]
[loaded] com.vmware.kext.vsockets (90.6.0) [Click for support]
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.10) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.10) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.10) [Click for support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.10) [Click for support]
/Library/Extensions
[loaded] com.driver.LogJoystick (2.0 - SDK 10.9) [Click for support]
[not loaded] com.keyspan.iokit.usb.KeyspanUSAdriver (1 - SDK 10.9) [Click for support]
[not loaded] com.logitech.driver.LogiGamingMouseFilter (1 - SDK 10.9) [Click for support]
/System/Library/Extensions
[loaded] com.protech.NoSleep (1.4.0 - SDK 10.10) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.sbd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[running] com.paragon.NTFS.notify.plist [Click for support]
2 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.wdhelper.plist
8 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.bjango.istatmenusagent.plist [Click for support]
[running] com.bjango.istatmenusnotifications.plist [Click for support]
[loaded] com.citrix.AuthManager_Mac.plist [Click for support]
[running] com.citrix.ReceiverHelper.plist [Click for support]
[running] com.citrix.ServiceRecords.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[unknown] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.teamviewer.teamviewer.plist [Click for support]
[running] com.teamviewer.teamviewer_desktop.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.bjango.istatmenusdaemon.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[unknown] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.paragon.ntfs12.refresh.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[running] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
[not loaded] org.virtualbox.startup.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
NoSleep Application (/Applications/Utilities/NoSleep.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
Google Chrome Application Hidden (/Applications/Google Chrome.app)
EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
Logitech Gaming Software Application Hidden (/Applications/Logitech/Logitech Gaming Software.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
VMwareClientSupportPlugin55: Version: VMwareClientSupportPlugin 5.5.0.41167 [Click for support]
CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 [Click for support]
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Unknown Check version
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
NoSleep [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
8% WindowServer
1% LastPass
1% Google Chrome
0% SystemUIServer
0% fontd
Top Processes by Memory: ℹ️
155 MB Google Chrome
131 MB Google Chrome Helper
120 MB Dock
103 MB Finder
94 MB mds_stores
Virtual Memory Information: ℹ️
237 MB Free RAM
2.63 GB Active RAM
1.93 GB Inactive RAM
2.64 GB Wired RAM
69.24 GB Page-ins
4.21 GB Page-outs
Diagnostics Information: ℹ️
Feb 18, 2015, 11:13:39 AM /Library/Logs/DiagnosticReports/vmware-vmx_2015-02-18-111339_[redacted].crash
Feb 18, 2015, 10:52:59 AM /Library/Logs/DiagnosticReports/loginwindow_2015-02-18-105259_[redacted].crash
Feb 5, 2015, 08:58:41 PM /Library/Logs/DiagnosticReports/Kernel_2015-02-05-205841_[redacted].panic [Click for details] -
"exists in filesystem" issue while making PKGBUILD for a python module
This is the package. http://packages.python.org/vcs/usage/vc … n-commands
Its already not in the AUR, so I decided of making the PKGBUILD http://sprunge.us/XVTA
Now, when I try to install it, I get this error
shadyabhi@archlinux /tmp $ sudo pacman -U python2-vcs-0.2.0-1-x86_64.pkg.tar.xz
Password:
resolving dependencies...
looking for inter-conflicts...
Targets (1): python2-vcs-0.2.0-1 [0.11 MB]
Total Download Size: 0.00 MB
Total Installed Size: 1.27 MB
Proceed with installation? [Y/n]
(1/1) checking package integrity [################################################################] 100%
(1/1) checking for file conflicts [################################################################] 100%
error: failed to commit transaction (conflicting files)
python2-vcs: /usr/lib/python2.7/site-packages/tests/__init__.py exists in filesystem
python2-vcs: /usr/lib/python2.7/site-packages/tests/__init__.pyc exists in filesystem
python2-vcs: /usr/lib/python2.7/site-packages/tests/__init__.pyo exists in filesystem
shadyabhi@archlinux /tmp $
Also, these files are owned by:
shadyabhi@archlinux ~ $ pacman -Qo /usr/lib/python2.7/site-packages/tests/__init__.py
/usr/lib/python2.7/site-packages/tests/__init__.py is owned by python-paste-deploy 1.3.4-1
shadyabhi@archlinux ~ $
So, what should be done?Added a note to the python packaging guidelines about not putting a directory named "tests" directly in "site-packages". Hope it helps avoiding this issue in the future.
https://wiki.archlinux.org/index.php/Py … Guidelines -
Yosemite download issues related to cooling fan
I have spent over 10 hours on the phone with tech support, and 4 days attempting to resolve a download problem on my MBP. After upgrading to Yosemite I attempted to update my primary software package for work and the download continues to stall during download. Apple care told it was the Software's company's fault, the software company pointed me back to Apple. Apple pointed me back to them and they pointed back to Apple - I just want what I have paid for to work as advertised.
Here is where I am at now: I will begin the download and it will progress like normal, then the cooling fan comes on and the download with stop. Several times the progress of the download, in percentage, actually shows to decrease - meaning it goes backwards somehow. I cancel the download and restart the software the cooling fan stops, I restart the download and after a random amount of time the coolings fans start again and the download stalls. I know that this sounds very unrelated but since I noticed this connection it has done it every time since and I have went through this process at least 12 times since first making the connection.
I have followed all of the steps from Apple's senior advisor in checking settings and troubleshooting. She told me that it was the software's problem. The software company tells me their servers are good and then shows me the mountain of reports from Yosemite users that are having similar issues. Meanwhile I'm stuck with a $2500 dollar MBP and a $3000 software investment that I can't use for the purpose that I bought them. When I told Apple care about the fan issue they inferred that I was crazy to think that the cooling fan could be connected - maybe I am.It's not clear to me if this is an issue within the software package such as with a download feature within a particular software package or software distribution mechanism, or if this is something weird with OS X Yosemite that's causing a problem elsewhere that's effecting this download.
Who is the third-party vendor, and what is the package? Is there a posting from the vendor pointing to the issue?
Has the third-party vendor plans to offer an alternative download path, which would seem reasonable for a case such as this with a "mountain of reports" involved?
Given your long discussion with the vendor and with Apple, have there been specific suggestions you've tried and found haven't worked? Otherwise, we're just going to repeat some of those.
The cooling fan gets involved when something goes compute-bound or otherwise starts looping, either due to a design problem or due to a bug. Adobe Flash Player tends to spool up the fans, for instance. -
Yosemite NVIDIA issue on MacPro 5,1
I'm getting visual noise and screen rendering errors. It started when I upgraded this Mac Pro 5,1 with an SSD drive and fresh install of Yosemite 10.10. I had previously been using 10.8.5 on a conventional drive with no issues. The graphics card is an NVIDIA k5000 attached to two 27" Apple Displays via display port and a 50" Panasonic video monitor via HDMI. A few dozen times each day I'll see interface noise (see example in attached image). This occurs in my most used apps, including Finder, Premiere Pro, After Effects, Photoshop and Safari. This problem only occurs on the Yosemite OS on the SSD drive.
I am using the latest drivers from NVIDIA; CUDA Driver Version: 6.5.18 and GPU Driver Version: 10.0.43 310.41.05f01. I downloaded the NVIDIA Driver Manager. Selecting and restarting using either the "NVIDIA Web Driver" or the "OS X Default Graphics Driver" does not resolve the problem. I've also tried enabling ECC which does not solve it. I then replaced the K5000 with the original ATI Radeon HD 5770. The ATI does not have this problem, only the K5000. I then thought the card was dying or becoming defective, which didn't make sense because everything is clean when using the boot drive with 10.8.5. Despite my reservations, I purchased a new PNY made NVIDIA K5000, the same as the first, and the problem persists. The K5000 cards are not defective as both of them always display a clean interface in 10.8.5. It is clearly an issue with the K5000 on a MacPro using 10.10 or 10.10.1.
Anyone else experiencing GPU issues like this on Yosemite? I've seen many postings about other GPU issues but mostly with laptops. Apple or NVIDIA, are you aware of this? Also, where can I submit a bug/issue report to Apple and NVIDIA?I'm having the same problem (and more) on my 2014 Retina MacBook Pro running Yosemite 10.10.2.
Two days ago the CUDA Preferences panel said there was an upgrade, and installed CUDA Driver Version 6.5.36.
In Activity Monitor "aerendercore" shows as "not responding" around 10 times a day. Premiere crashes 2-3 times a day.
I checked nvidia website, and they had a 6.5.37. Installed that, but same issues.
CUDA Panel also says "GPU Driver Version" is "10.2.1 310.41.15f01" ... not sure if that is something that can be updated.
I'm rebooting 4-5 times a day.
Not sure what to do ... have you had any luck? -
Whoa. What is happening here? I've been monitoring the Activity Monitor this
last week, and this evening the memory values seem to be going crazy (see screenshot).
What is backupd and why is it using 51 GB of memory? And why is kernel_task suddenly over 9 GB?
I can feel my MacBook Pro retina late 2013 13" with 16 GB of RAM slowing down, and the "memory pressure" is way up.
I hate having to restart because I have so much work open, but I guess I have no choice.
Any idea what might be happening?
dougYes, it must have been a memory issue with Time Machine. I see the last backup was some 9 hours ago, so I guess it has been sitting there twiddling its thumbs since then, eating away at memory.
I restarted. Fortunately it only takes a minute with the SSD drives. All the same apps and windows are open as before, but as you can see in the screenshot, memory is back to normal.
Plus there is no more input lag. Everything is fast again.
It must be a memory leak or something in Time Machine I imagine.
After restarting and forcing Time Machine to "backup now" it finished the backup successfully very quickly. And while backing up it was way down in the list, using only 25 MB of memory.
I think in this case there is no doubt it's another Yosemite memory bug of some kind.
doug -
Apple Remote Desktop Admin 3.7.2 Yosemite wake issue
Another serious problems is.... Apple Remote Desktop Admin 3.7.2 in Yosemite cannot wake up clients Mac remotely. Control has no problem after waking up.
On 10.9.x I can wake up remote Mac clients if sleeping. Now I have to do it on the other Mac running older OS version.I have a different issue.
Just updated s classroom full of computers and desktop client will no longer observe more than on computer at a time. I can no longer observe groups of computers. Any thoughts on this issue guys? Mac OSX Yosemite 10.10 -
[SOLVED] Case-insensitive filesystem issue
Dear fellas,
I am trying to compile an AOSP rom using the following configuration:
- Arch Linux x64
- Latest Kernel 3.12.8-1-ARCH
- BTRFS filesystem
I got the following error:
build/core/main.mk:118: You are building on a case-insensitive filesystem.
build/core/main.mk:119: Please move your source tree to a case-sensitive filesystem.
build/core/main.mk:120: ************************************************************
build/core/main.mk:121: *** Case-insensitive filesystems not supported. Stop.
So far, I was compiling with no issue. It just starts a couple days ago. I suspect that maybe is due to some kernel change.
Anyone already face this issue?
Appreciate any clue.
========================SOLVED==========================
Here is the solution presented by korn36 that did the magic for the main issue:
Remove this from build/core/main.mk, then compile:
ifneq ($(HOST_OS),windows)
ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc)
# check for a case sensitive file system
ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \
echo a > $(OUT_DIR)/casecheck.txt; \
echo B > $(OUT_DIR)/CaseCheck.txt; \
cat $(OUT_DIR)/casecheck.txt))
$(warning ************************************************************)
$(warning You are building on a case-insensitive filesystem.)
$(warning Please move your source tree to a case-sensitive filesystem.)
$(warning ************************************************************)
$(error Case-insensitive filesystems not supported)
endif
endif
endif
It will disable the case-sensitivity check.
================edited====================
Again thanks to korn36 for the elegant python switch solution:
find . -name "*.py" -exec sed -i 's/\(bin\/env\ python$\|bin\/python$\)/bin\/env\ python2/g' {} \;
Thanks to Kacper for heads me up to a typo I made.
===============edited=====================
or still other script provided by Scimmia (Thanks Scimmia)
or simply
find . -name "*.py" -exec sed -i 's/env python$/&2/' {} \;
Just FYI both scripts works flawlessly!
Best Regards
Erick
Last edited by erickwill (2014-01-26 15:37:56)Here you go:
# Only use ANDROID_BUILD_SHELL to wrap around bash.
# DO NOT use other shells such as zsh.
ifdef ANDROID_BUILD_SHELL
SHELL := $(ANDROID_BUILD_SHELL)
else
# Use bash, not whatever shell somebody has installed as /bin/sh
# This is repeated in config.mk, since envsetup.sh runs that file
# directly.
SHELL := /bin/bash
endif
# this turns off the suffix rules built into make
.SUFFIXES:
# this turns off the RCS / SCCS implicit rules of GNU Make
% : RCS/%,v
% : RCS/%
% : %,v
% : s.%
% : SCCS/s.%
# If a rule fails, delete $@.
.DELETE_ON_ERROR:
# Figure out where we are.
#TOP := $(dir $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST)))
#TOP := $(patsubst %/,%,$(TOP))
# TOPDIR is the normal variable you should use, because
# if we are executing relative to the current directory
# it can be "", whereas TOP must be "." which causes
# pattern matching probles when make strips off the
# trailing "./" from paths in various places.
#ifeq ($(TOP),.)
#TOPDIR :=
#else
#TOPDIR := $(TOP)/
#endif
# Check for broken versions of make.
# (Allow any version under Cygwin since we don't actually build the platform there.)
ifeq (,$(findstring CYGWIN,$(shell uname -sm)))
ifneq (1,$(strip $(shell expr $(MAKE_VERSION) \>= 3.81)))
$(warning ********************************************************************************)
$(warning * You are using version $(MAKE_VERSION) of make.)
$(warning * Android can only be built by versions 3.81 and higher.)
$(warning * see https://source.android.com/source/download.html)
$(warning ********************************************************************************)
$(error stopping)
endif
endif
# Absolute path of the present working direcotry.
# This overrides the shell variable $PWD, which does not necessarily points to
# the top of the source tree, for example when "make -C" is used in m/mm/mmm.
PWD := $(shell pwd)
TOP := .
TOPDIR :=
BUILD_SYSTEM := $(TOPDIR)build/core
# This is the default target. It must be the first declared target.
.PHONY: droid
DEFAULT_GOAL := droid
$(DEFAULT_GOAL):
# Used to force goals to build. Only use for conditionally defined goals.
.PHONY: FORCE
FORCE:
# These goals don't need to collect and include Android.mks/CleanSpec.mks
# in the source tree.
dont_bother_goals := clean clobber dataclean installclean \
help out \
snod systemimage-nodeps \
stnod systemtarball-nodeps \
userdataimage-nodeps userdatatarball-nodeps \
cacheimage-nodeps \
vendorimage-nodeps \
ramdisk-nodeps \
bootimage-nodeps
ifneq ($(filter $(dont_bother_goals), $(MAKECMDGOALS)),)
dont_bother := true
endif
# Targets that provide quick help on the build system.
include $(BUILD_SYSTEM)/help.mk
# Set up various standard variables based on configuration
# and host information.
include $(BUILD_SYSTEM)/config.mk
# This allows us to force a clean build - included after the config.mk
# environment setup is done, but before we generate any dependencies. This
# file does the rm -rf inline so the deps which are all done below will
# be generated correctly
include $(BUILD_SYSTEM)/cleanbuild.mk
# Include the google-specific config
-include vendor/google/build/config.mk
VERSION_CHECK_SEQUENCE_NUMBER := 3
-include $(OUT_DIR)/versions_checked.mk
ifneq ($(VERSION_CHECK_SEQUENCE_NUMBER),$(VERSIONS_CHECKED))
$(info Checking build tools versions...)
ifneq ($(HOST_OS),windows)
ifneq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc)
# check for a case sensitive file system
ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \
echo a > $(OUT_DIR)/casecheck.txt; \
echo B > $(OUT_DIR)/CaseCheck.txt; \
cat $(OUT_DIR)/casecheck.txt))
$(warning ************************************************************)
$(warning You are building on a case-insensitive filesystem.)
$(warning Please move your source tree to a case-sensitive filesystem.)
$(warning ************************************************************)
$(error Case-insensitive filesystems not supported)
endif
endif
endif
# Make sure that there are no spaces in the absolute path; the
# build system can't deal with them.
ifneq ($(words $(shell pwd)),1)
$(warning ************************************************************)
$(warning You are building in a directory whose absolute path contains)
$(warning a space character:)
$(warning $(space))
$(warning "$(shell pwd)")
$(warning $(space))
$(warning Please move your source tree to a path that does not contain)
$(warning any spaces.)
$(warning ************************************************************)
$(error Directory names containing spaces not supported)
endif
# Check for the corrent jdk
ifneq ($(shell java -version 2>&1 | grep -i openjdk),)
$(info ************************************************************)
$(info You are attempting to build with an unsupported JDK.)
$(info $(space))
$(info You use OpenJDK but only Sun/Oracle JDK is supported.)
$(info Please follow the machine setup instructions at)
$(info $(space)$(space)$(space)$(space)https://source.android.com/source/download.html)
$(info $(space))
$(info Continue at your own peril!)
$(info ************************************************************)
endif
# Check for the correct version of java
java_version := $(shell java -version 2>&1 | head -n 1 | grep '^java .*[ "]1\.[67][\. "$$]')
ifeq ($(strip $(java_version)),)
$(info ************************************************************)
$(info You are attempting to build with the incorrect version)
$(info of java.)
$(info $(space))
$(info Your version is: $(shell java -version 2>&1 | head -n 1).)
$(info The correct version is: Java SE 1.6 or 1.7.)
$(info $(space))
$(info Please follow the machine setup instructions at)
$(info $(space)$(space)$(space)$(space)https://source.android.com/source/download.html)
$(info ************************************************************)
$(error stop)
endif
# Check for the correct version of javac
javac_version := $(shell javac -version 2>&1 | head -n 1 | grep '[ "]1\.[67][\. "$$]')
ifeq ($(strip $(javac_version)),)
$(info ************************************************************)
$(info You are attempting to build with the incorrect version)
$(info of javac.)
$(info $(space))
$(info Your version is: $(shell javac -version 2>&1 | head -n 1).)
$(info The correct version is: 1.6 or 1.7.)
$(info $(space))
$(info Please follow the machine setup instructions at)
$(info $(space)$(space)$(space)$(space)https://source.android.com/source/download.html)
$(info ************************************************************)
$(error stop)
endif
ifndef BUILD_EMULATOR
ifeq (darwin,$(HOST_OS))
GCC_REALPATH = $(realpath $(shell which $(HOST_CC)))
ifneq ($(findstring llvm-gcc,$(GCC_REALPATH)),)
# Using LLVM GCC results in a non functional emulator due to it
# not honouring global register variables
$(warning ****************************************)
$(warning * gcc is linked to llvm-gcc which will *)
$(warning * not create a useable emulator. *)
$(warning ****************************************)
BUILD_EMULATOR := false
else
BUILD_EMULATOR := true
endif
else # HOST_OS is not darwin
BUILD_EMULATOR := true
endif # HOST_OS is darwin
endif
$(shell echo 'VERSIONS_CHECKED := $(VERSION_CHECK_SEQUENCE_NUMBER)' \
> $(OUT_DIR)/versions_checked.mk)
$(shell echo 'BUILD_EMULATOR ?= $(BUILD_EMULATOR)' \
>> $(OUT_DIR)/versions_checked.mk)
endif
# These are the modifier targets that don't do anything themselves, but
# change the behavior of the build.
# (must be defined before including definitions.make)
INTERNAL_MODIFIER_TARGETS := showcommands all incrementaljavac
.PHONY: incrementaljavac
incrementaljavac: ;
# WARNING:
# ENABLE_INCREMENTALJAVAC should NOT be enabled by default, because change of
# a Java source file won't trigger rebuild of its dependent Java files.
# You can only enable it by adding "incrementaljavac" to your make command line.
# You are responsible for the correctness of the incremental build.
# This may decrease incremental build time dramatically for large Java libraries,
# such as core.jar, framework.jar, etc.
ENABLE_INCREMENTALJAVAC :=
ifneq (,$(filter incrementaljavac, $(MAKECMDGOALS)))
ENABLE_INCREMENTALJAVAC := true
MAKECMDGOALS := $(filter-out incrementaljavac, $(MAKECMDGOALS))
endif
# EMMA_INSTRUMENT_STATIC merges the static emma library to each emma-enabled module.
ifeq (true,$(EMMA_INSTRUMENT_STATIC))
EMMA_INSTRUMENT := true
endif
# Bring in standard build system definitions.
include $(BUILD_SYSTEM)/definitions.mk
# Bring in Qualcomm helper macros
include $(BUILD_SYSTEM)/qcom_utils.mk
# Bring in dex_preopt.mk
include $(BUILD_SYSTEM)/dex_preopt.mk
ifneq ($(filter user userdebug eng,$(MAKECMDGOALS)),)
$(info ***************************************************************)
$(info ***************************************************************)
$(info Do not pass '$(filter user userdebug eng,$(MAKECMDGOALS))' on \
the make command line.)
$(info Set TARGET_BUILD_VARIANT in buildspec.mk, or use lunch or)
$(info choosecombo.)
$(info ***************************************************************)
$(info ***************************************************************)
$(error stopping)
endif
ifneq ($(filter-out $(INTERNAL_VALID_VARIANTS),$(TARGET_BUILD_VARIANT)),)
$(info ***************************************************************)
$(info ***************************************************************)
$(info Invalid variant: $(TARGET_BUILD_VARIANT)
$(info Valid values are: $(INTERNAL_VALID_VARIANTS)
$(info ***************************************************************)
$(info ***************************************************************)
$(error stopping)
endif
# Variable to check java support level inside PDK build.
# Not necessary if the components is not in PDK.
# not defined : not supported
# "sdk" : sdk API only
# "platform" : platform API supproted
TARGET_BUILD_JAVA_SUPPORT_LEVEL := platform
# The pdk (Platform Development Kit) build
include build/core/pdk_config.mk
### In this section we set up the things that are different
### between the build variants
is_sdk_build :=
ifneq ($(filter sdk win_sdk sdk_addon,$(MAKECMDGOALS)),)
is_sdk_build := true
endif
## user/userdebug ##
user_variant := $(filter user userdebug,$(TARGET_BUILD_VARIANT))
enable_target_debugging := true
tags_to_install :=
ifneq (,$(user_variant))
# Target is secure in user builds.
ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1
ifeq ($(user_variant),userdebug)
# Pick up some extra useful tools
tags_to_install += debug
# Enable Dalvik lock contention logging for userdebug builds.
ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.lockprof.threshold=500
else
# Disable debugging in plain user builds.
enable_target_debugging :=
endif
# Turn on Dalvik preoptimization for user builds, but only if not
# explicitly disabled and the build is running on Linux (since host
# Dalvik isn't built for non-Linux hosts).
ifneq (true,$(DISABLE_DEXPREOPT))
ifeq ($(user_variant),user)
ifeq ($(HOST_OS),linux)
WITH_DEXPREOPT := true
endif
endif
endif
# Disallow mock locations by default for user builds
ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0
else # !user_variant
# Turn on checkjni for non-user builds.
ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1
# Set device insecure for non-user builds.
ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0
# Allow mock locations by default for non user builds
ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1
endif # !user_variant
ifeq (true,$(strip $(enable_target_debugging)))
# Target is more debuggable and adbd is on by default
ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1
# Include the debugging/testing OTA keys in this build.
INCLUDE_TEST_OTA_KEYS := true
else # !enable_target_debugging
# Target is less debuggable and adbd is off by default
ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0
endif # !enable_target_debugging
## eng ##
ifeq ($(TARGET_BUILD_VARIANT),eng)
tags_to_install := debug eng
ifneq ($(filter ro.setupwizard.mode=ENABLED, $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))),)
# Don't require the setup wizard on eng builds
ADDITIONAL_BUILD_PROPERTIES := $(filter-out ro.setupwizard.mode=%,\
$(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))) \
ro.setupwizard.mode=OPTIONAL
endif
endif
## sdk ##
ifdef is_sdk_build
# Detect if we want to build a repository for the SDK
sdk_repo_goal := $(strip $(filter sdk_repo,$(MAKECMDGOALS)))
MAKECMDGOALS := $(strip $(filter-out sdk_repo,$(MAKECMDGOALS)))
ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS) checkbuild,$(MAKECMDGOALS))),1)
$(error The 'sdk' target may not be specified with any other targets)
endif
# TODO: this should be eng I think. Since the sdk is built from the eng
# variant.
tags_to_install := debug eng
ADDITIONAL_BUILD_PROPERTIES += xmpp.auto-presence=true
ADDITIONAL_BUILD_PROPERTIES += ro.config.nocheckin=yes
else # !sdk
endif
BUILD_WITHOUT_PV := true
## precise GC ##
ifneq ($(filter dalvik.gc.type-precise,$(PRODUCT_TAGS)),)
# Enabling type-precise GC results in larger optimized DEX files. The
# additional storage requirements for ".odex" files can cause /system
# to overflow on some devices, so this is configured separately for
# each product.
ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.dexopt-flags=m=y
endif
ADDITIONAL_BUILD_PROPERTIES += net.bt.name=Android
# enable vm tracing in files for now to help track
# the cause of ANRs in the content process
ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.stack-trace-file=/data/anr/traces.txt
# Define a function that, given a list of module tags, returns
# non-empty if that module should be installed in /system.
# For most goals, anything not tagged with the "tests" tag should
# be installed in /system.
define should-install-to-system
$(if $(filter tests,$(1)),,true)
endef
ifdef is_sdk_build
# For the sdk goal, anything with the "samples" tag should be
# installed in /data even if that module also has "eng"/"debug"/"user".
define should-install-to-system
$(if $(filter samples tests,$(1)),,true)
endef
endif
# If they only used the modifier goals (showcommands, etc), we'll actually
# build the default target.
ifeq ($(filter-out $(INTERNAL_MODIFIER_TARGETS),$(MAKECMDGOALS)),)
.PHONY: $(INTERNAL_MODIFIER_TARGETS)
$(INTERNAL_MODIFIER_TARGETS): $(DEFAULT_GOAL)
endif
# Bring in all modules that need to be built.
ifeq ($(HOST_OS)-$(HOST_ARCH),darwin-ppc)
SDK_ONLY := true
$(info Building the SDK under darwin-ppc is actually obsolete and unsupported.)
$(error stop)
endif
ifeq ($(HOST_OS),windows)
SDK_ONLY := true
endif
ifeq ($(SDK_ONLY),true)
include $(TOPDIR)sdk/build/windows_sdk_whitelist.mk
include $(TOPDIR)development/build/windows_sdk_whitelist.mk
# Exclude tools/acp when cross-compiling windows under linux
ifeq ($(findstring Linux,$(UNAME)),)
subdirs += build/tools/acp
endif
else # !SDK_ONLY
# Typical build; include any Android.mk files we can find.
subdirs := $(TOP)
FULL_BUILD := true
endif # !SDK_ONLY
# Before we go and include all of the module makefiles, stash away
# the PRODUCT_* values so that later we can verify they are not modified.
stash_product_vars:=true
ifeq ($(stash_product_vars),true)
$(call stash-product-vars, __STASHED)
endif
ifneq ($(ONE_SHOT_MAKEFILE),)
# We've probably been invoked by the "mm" shell function
# with a subdirectory's makefile.
include $(ONE_SHOT_MAKEFILE)
# Change CUSTOM_MODULES to include only modules that were
# defined by this makefile; this will install all of those
# modules as a side-effect. Do this after including ONE_SHOT_MAKEFILE
# so that the modules will be installed in the same place they
# would have been with a normal make.
CUSTOM_MODULES := $(sort $(call get-tagged-modules,$(ALL_MODULE_TAGS)))
FULL_BUILD :=
# Stub out the notice targets, which probably aren't defined
# when using ONE_SHOT_MAKEFILE.
NOTICE-HOST-%: ;
NOTICE-TARGET-%: ;
# A helper goal printing out install paths
.PHONY: GET-INSTALL-PATH
GET-INSTALL-PATH:
@$(foreach m, $(ALL_MODULES), $(if $(ALL_MODULES.$(m).INSTALLED), \
echo 'INSTALL-PATH: $(m) $(ALL_MODULES.$(m).INSTALLED)';))
else # ONE_SHOT_MAKEFILE
ifneq ($(dont_bother),true)
# Include all of the makefiles in the system
# Can't use first-makefiles-under here because
# --mindepth=2 makes the prunes not work.
subdir_makefiles := \
$(shell build/tools/findleaves.py --prune=$(OUT_DIR) --prune=.repo --prune=.git $(subdirs) Android.mk)
ifneq ($(HIDE_MAKEFILE_INCLUDES),y)
$(foreach mk, $(subdir_makefiles), $(info including $(mk) ...)$(eval include $(mk)))
else
$(foreach mk, $(subdir_makefiles), $(eval include $(mk)))
endif
endif # dont_bother
endif # ONE_SHOT_MAKEFILE
# Now with all Android.mks loaded we can do post cleaning steps.
include $(BUILD_SYSTEM)/post_clean.mk
ifeq ($(stash_product_vars),true)
$(call assert-product-vars, __STASHED)
endif
include $(BUILD_SYSTEM)/legacy_prebuilts.mk
ifneq ($(filter-out $(GRANDFATHERED_ALL_PREBUILT),$(strip $(notdir $(ALL_PREBUILT)))),)
$(warning *** Some files have been added to ALL_PREBUILT.)
$(warning *)
$(warning * ALL_PREBUILT is a deprecated mechanism that)
$(warning * should not be used for new files.)
$(warning * As an alternative, use PRODUCT_COPY_FILES in)
$(warning * the appropriate product definition.)
$(warning * build/target/product/core.mk is the product)
$(warning * definition used in all products.)
$(warning *)
$(foreach bad_prebuilt,$(filter-out $(GRANDFATHERED_ALL_PREBUILT),$(strip $(notdir $(ALL_PREBUILT)))),$(warning * unexpected $(bad_prebuilt) in ALL_PREBUILT))
$(warning *)
$(error ALL_PREBUILT contains unexpected files)
endif
# All module makefiles have been included at this point.
# Fix up CUSTOM_MODULES to refer to installed files rather than
# just bare module names. Leave unknown modules alone in case
# they're actually full paths to a particular file.
known_custom_modules := $(filter $(ALL_MODULES),$(CUSTOM_MODULES))
unknown_custom_modules := $(filter-out $(ALL_MODULES),$(CUSTOM_MODULES))
CUSTOM_MODULES := \
$(call module-installed-files,$(known_custom_modules)) \
$(unknown_custom_modules)
# Define dependencies for modules that require other modules.
# This can only happen now, after we've read in all module makefiles.
# TODO: deal with the fact that a bare module name isn't
# unambiguous enough. Maybe declare short targets like
# APPS:Quake or HOST:SHARED_LIBRARIES:libutils.
# BUG: the system image won't know to depend on modules that are
# brought in as requirements of other modules.
define add-required-deps
$(1): | $(2)
endef
$(foreach m,$(ALL_MODULES), \
$(eval r := $(ALL_MODULES.$(m).REQUIRED)) \
$(if $(r), \
$(eval r := $(call module-installed-files,$(r))) \
$(eval t_m := $(filter $(TARGET_OUT_ROOT)/%, $(ALL_MODULES.$(m).INSTALLED))) \
$(eval h_m := $(filter $(HOST_OUT_ROOT)/%, $(ALL_MODULES.$(m).INSTALLED))) \
$(eval t_r := $(filter $(TARGET_OUT_ROOT)/%, $(r))) \
$(eval h_r := $(filter $(HOST_OUT_ROOT)/%, $(r))) \
$(if $(t_m), $(eval $(call add-required-deps, $(t_m),$(t_r)))) \
$(if $(h_m), $(eval $(call add-required-deps, $(h_m),$(h_r)))) \
t_m :=
h_m :=
t_r :=
h_r :=
# Resolve the dependencies on shared libraries.
$(foreach m,$(TARGET_DEPENDENCIES_ON_SHARED_LIBRARIES), \
$(eval p := $(subst :,$(space),$(m))) \
$(eval r := $(filter $(TARGET_OUT_ROOT)/%,$(call module-installed-files,\
$(subst $(comma),$(space),$(lastword $(p)))))) \
$(eval $(call add-required-deps,$(word 2,$(p)),$(r))))
$(foreach m,$(HOST_DEPENDENCIES_ON_SHARED_LIBRARIES), \
$(eval p := $(subst :,$(space),$(m))) \
$(eval r := $(filter $(HOST_OUT_ROOT)/%,$(call module-installed-files,\
$(subst $(comma),$(space),$(lastword $(p)))))) \
$(eval $(call add-required-deps,$(word 2,$(p)),$(r))))
m :=
r :=
p :=
add-required-deps :=
# Figure out our module sets.
# Of the modules defined by the component makefiles,
# determine what we actually want to build.
ifdef FULL_BUILD
# The base list of modules to build for this product is specified
# by the appropriate product definition file, which was included
# by product_config.make.
product_MODULES := $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)
# Filter out the overridden packages before doing expansion
product_MODULES := $(filter-out $(foreach p, $(product_MODULES), \
$(PACKAGES.$(p).OVERRIDES)), $(product_MODULES))
$(call expand-required-modules,product_MODULES,$(product_MODULES))
product_FILES := $(call module-installed-files, $(product_MODULES))
ifeq (0,1)
$(info product_FILES for $(TARGET_DEVICE) ($(INTERNAL_PRODUCT)):)
$(foreach p,$(product_FILES),$(info : $(p)))
$(error done)
endif
else
# We're not doing a full build, and are probably only including
# a subset of the module makefiles. Don't try to build any modules
# requested by the product, because we probably won't have rules
# to build them.
product_FILES :=
endif
eng_MODULES := $(sort \
$(call get-tagged-modules,eng) \
$(call module-installed-files, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_ENG)) \
debug_MODULES := $(sort \
$(call get-tagged-modules,debug) \
$(call module-installed-files, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_DEBUG)) \
tests_MODULES := $(sort \
$(call get-tagged-modules,tests) \
$(call module-installed-files, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_TESTS)) \
# TODO: Remove the 3 places in the tree that use ALL_DEFAULT_INSTALLED_MODULES
# and get rid of it from this list.
# TODO: The shell is chosen by magic. Do we still need this?
modules_to_install := $(sort \
$(ALL_DEFAULT_INSTALLED_MODULES) \
$(product_FILES) \
$(foreach tag,$(tags_to_install),$($(tag)_MODULES)) \
$(call get-tagged-modules, shell_$(TARGET_SHELL)) \
$(CUSTOM_MODULES) \
# Some packages may override others using LOCAL_OVERRIDES_PACKAGES.
# Filter out (do not install) any overridden packages.
overridden_packages := $(call get-package-overrides,$(modules_to_install))
ifdef overridden_packages
# old_modules_to_install := $(modules_to_install)
modules_to_install := \
$(filter-out $(foreach p,$(overridden_packages),$(p) %/$(p).apk), \
$(modules_to_install))
endif
#$(error filtered out
# $(filter-out $(modules_to_install),$(old_modules_to_install)))
# Don't include any GNU targets in the SDK. It's ok (and necessary)
# to build the host tools, but nothing that's going to be installed
# on the target (including static libraries).
ifdef is_sdk_build
target_gnu_MODULES := \
$(filter \
$(TARGET_OUT_INTERMEDIATES)/% \
$(TARGET_OUT)/% \
$(TARGET_OUT_DATA)/%, \
$(sort $(call get-tagged-modules,gnu)))
$(info Removing from sdk:)$(foreach d,$(target_gnu_MODULES),$(info : $(d)))
modules_to_install := \
$(filter-out $(target_gnu_MODULES),$(modules_to_install))
# Ensure every module listed in PRODUCT_PACKAGES* gets something installed
# TODO: Should we do this for all builds and not just the sdk?
$(foreach m, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES), \
$(if $(strip $(ALL_MODULES.$(m).INSTALLED)),,\
$(error $(ALL_MODULES.$(m).MAKEFILE): Module '$(m)' in PRODUCT_PACKAGES has nothing to install!)))
$(foreach m, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_DEBUG), \
$(if $(strip $(ALL_MODULES.$(m).INSTALLED)),,\
$(warning $(ALL_MODULES.$(m).MAKEFILE): Module '$(m)' in PRODUCT_PACKAGES_DEBUG has nothing to install!)))
$(foreach m, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_ENG), \
$(if $(strip $(ALL_MODULES.$(m).INSTALLED)),,\
$(warning $(ALL_MODULES.$(m).MAKEFILE): Module '$(m)' in PRODUCT_PACKAGES_ENG has nothing to install!)))
$(foreach m, $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES_TESTS), \
$(if $(strip $(ALL_MODULES.$(m).INSTALLED)),,\
$(warning $(ALL_MODULES.$(m).MAKEFILE): Module '$(m)' in PRODUCT_PACKAGES_TESTS has nothing to install!)))
endif
# build/core/Makefile contains extra stuff that we don't want to pollute this
# top-level makefile with. It expects that ALL_DEFAULT_INSTALLED_MODULES
# contains everything that's built during the current make, but it also further
# extends ALL_DEFAULT_INSTALLED_MODULES.
ALL_DEFAULT_INSTALLED_MODULES := $(modules_to_install)
include $(BUILD_SYSTEM)/Makefile
modules_to_install := $(sort $(ALL_DEFAULT_INSTALLED_MODULES))
ALL_DEFAULT_INSTALLED_MODULES :=
# These are additional goals that we build, in order to make sure that there
# is as little code as possible in the tree that doesn't build.
modules_to_check := $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).CHECKED))
# If you would like to build all goals, and not skip any intermediate
# steps, you can pass the "all" modifier goal on the commandline.
ifneq ($(filter all,$(MAKECMDGOALS)),)
modules_to_check += $(foreach m,$(ALL_MODULES),$(ALL_MODULES.$(m).BUILT))
endif
# for easier debugging
modules_to_check := $(sort $(modules_to_check))
#$(error modules_to_check $(modules_to_check))
# This is used to to get the ordering right, you can also use these,
# but they're considered undocumented, so don't complain if their
# behavior changes.
.PHONY: prebuilt
prebuilt: $(ALL_PREBUILT)
# An internal target that depends on all copied headers
# (see copy_headers.make). Other targets that need the
# headers to be copied first can depend on this target.
.PHONY: all_copied_headers
all_copied_headers: ;
$(ALL_C_CPP_ETC_OBJECTS): | all_copied_headers
# All the droid stuff, in directories
.PHONY: files
files: prebuilt \
$(modules_to_install) \
$(INSTALLED_ANDROID_INFO_TXT_TARGET)
.PHONY: checkbuild
checkbuild: $(modules_to_check)
ifeq (true,$(ANDROID_BUILD_EVERYTHING_BY_DEFAULT)$(filter $(MAKECMDGOALS),checkbuild))
droid: checkbuild
else
# ANDROID_BUILD_EVERYTHING_BY_DEFAULT not set, or checkbuild is one of the cmd goals.
checkbuild: droid
endif
.PHONY: ramdisk
ramdisk: $(INSTALLED_RAMDISK_TARGET)
.PHONY: factory_ramdisk
factory_ramdisk: $(INSTALLED_FACTORY_RAMDISK_TARGET)
.PHONY: factory_bundle
factory_bundle: $(INSTALLED_FACTORY_BUNDLE_TARGET)
.PHONY: systemtarball
systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET)
.PHONY: boottarball
boottarball: $(INSTALLED_BOOTTARBALL_TARGET)
.PHONY: userdataimage
userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET)
ifneq (,$(filter userdataimage, $(MAKECMDGOALS)))
$(call dist-for-goals, userdataimage, $(BUILT_USERDATAIMAGE_TARGET))
endif
.PHONY: userdatatarball
userdatatarball: $(INSTALLED_USERDATATARBALL_TARGET)
.PHONY: cacheimage
cacheimage: $(INSTALLED_CACHEIMAGE_TARGET)
.PHONY: vendorimage
vendorimage: $(INSTALLED_VENDORIMAGE_TARGET)
.PHONY: bootimage
bootimage: $(INSTALLED_BOOTIMAGE_TARGET)
# phony target that include any targets in $(ALL_MODULES)
.PHONY: all_modules
ifndef BUILD_MODULES_IN_PATHS
all_modules: $(ALL_MODULES)
else
# BUILD_MODULES_IN_PATHS is a list of paths relative to the top of the tree
module_path_patterns := $(foreach p, $(BUILD_MODULES_IN_PATHS),\
$(if $(filter %/,$(p)),$(p)%,$(p)/%))
my_all_modules := $(sort $(foreach m, $(ALL_MODULES),$(if $(filter\
$(module_path_patterns), $(addsuffix /,$(ALL_MODULES.$(m).PATH))),$(m))))
all_modules: $(my_all_modules)
endif
# Build files and then package it into the rom formats
.PHONY: droidcore
droidcore: files \
systemimage \
$(INSTALLED_BOOTIMAGE_TARGET) \
$(INSTALLED_RECOVERYIMAGE_TARGET) \
$(INSTALLED_USERDATAIMAGE_TARGET) \
$(INSTALLED_CACHEIMAGE_TARGET) \
$(INSTALLED_VENDORIMAGE_TARGET) \
$(INSTALLED_FILES_FILE)
# dist_files only for putting your library into the dist directory with a full build.
.PHONY: dist_files
ifneq ($(TARGET_BUILD_APPS),)
# If this build is just for apps, only build apps and not the full system by default.
unbundled_build_modules :=
ifneq ($(filter all,$(TARGET_BUILD_APPS)),)
# If they used the magic goal "all" then build all apps in the source tree.
unbundled_build_modules := $(foreach m,$(sort $(ALL_MODULES)),$(if $(filter APPS,$(ALL_MODULES.$(m).CLASS)),$(m)))
else
unbundled_build_modules := $(TARGET_BUILD_APPS)
endif
# Dist the installed files if they exist.
apps_only_installed_files := $(foreach m,$(unbundled_build_modules),$(ALL_MODULES.$(m).INSTALLED))
$(call dist-for-goals,apps_only, $(apps_only_installed_files))
# For uninstallable modules such as static Java library, we have to dist the built file,
# as <module_name>.<suffix>
apps_only_dist_built_files := $(foreach m,$(unbundled_build_modules),$(if $(ALL_MODULES.$(m).INSTALLED),,\
$(if $(ALL_MODULES.$(m).BUILT),$(ALL_MODULES.$(m).BUILT):$(m)$(suffix $(ALL_MODULES.$(m).BUILT)))))
$(call dist-for-goals,apps_only, $(apps_only_dist_built_files))
ifeq ($(EMMA_INSTRUMENT),true)
$(EMMA_META_ZIP) : $(apps_only_installed_files)
$(call dist-for-goals,apps_only, $(EMMA_META_ZIP))
endif
$(PROGUARD_DICT_ZIP) : $(apps_only_installed_files)
$(call dist-for-goals,apps_only, $(PROGUARD_DICT_ZIP))
.PHONY: apps_only
apps_only: $(unbundled_build_modules)
droid: apps_only
# Combine the NOTICE files for a apps_only build
$(eval $(call combine-notice-files, \
$(target_notice_file_txt), \
$(target_notice_file_html), \
"Notices for files for apps:", \
$(TARGET_OUT_NOTICE_FILES), \
$(apps_only_installed_files)))
else # TARGET_BUILD_APPS
$(call dist-for-goals, droidcore, \
$(INTERNAL_UPDATE_PACKAGE_TARGET) \
$(INTERNAL_OTA_PACKAGE_TARGET) \
$(SYMBOLS_ZIP) \
$(INSTALLED_FILES_FILE) \
$(INSTALLED_BUILD_PROP_TARGET) \
$(BUILT_TARGET_FILES_PACKAGE) \
$(INSTALLED_ANDROID_INFO_TXT_TARGET) \
$(INSTALLED_RAMDISK_TARGET) \
$(INSTALLED_FACTORY_RAMDISK_TARGET) \
$(INSTALLED_FACTORY_BUNDLE_TARGET) \
# Put a copy of the radio/bootloader files in the dist dir.
$(foreach f,$(INSTALLED_RADIOIMAGE_TARGET), \
$(call dist-for-goals, droidcore, $(f)))
ifneq ($(TARGET_BUILD_PDK),true)
$(call dist-for-goals, droidcore, \
$(APPS_ZIP) \
$(INTERNAL_EMULATOR_PACKAGE_TARGET) \
$(PACKAGE_STATS_FILE) \
endif
ifeq ($(EMMA_INSTRUMENT),true)
$(EMMA_META_ZIP) : $(INSTALLED_SYSTEMIMAGE)
$(call dist-for-goals, dist_files, $(EMMA_META_ZIP))
endif
# Building a full system-- the default is to build droidcore
droid: droidcore dist_files
endif # TARGET_BUILD_APPS
.PHONY: docs
docs: $(ALL_DOCS)
.PHONY: sdk
ALL_SDK_TARGETS := $(INTERNAL_SDK_TARGET)
sdk: $(ALL_SDK_TARGETS)
$(call dist-for-goals,sdk win_sdk, \
$(ALL_SDK_TARGETS) \
$(SYMBOLS_ZIP) \
$(INSTALLED_BUILD_PROP_TARGET) \
# umbrella targets to assit engineers in verifying builds
.PHONY: java native target host java-host java-target native-host native-target \
java-host-tests java-target-tests native-host-tests native-target-tests \
java-tests native-tests host-tests target-tests
# some synonyms
.PHONY: host-java target-java host-native target-native \
target-java-tests target-native-tests
host-java : java-host
target-java : java-target
host-native : native-host
target-native : native-target
target-java-tests : java-target-tests
target-native-tests : native-target-tests
.PHONY: lintall
.PHONY: samplecode
sample_MODULES := $(sort $(call get-tagged-modules,samples))
sample_APKS_DEST_PATH := $(TARGET_COMMON_OUT_ROOT)/samples
sample_APKS_COLLECTION := \
$(foreach module,$(sample_MODULES),$(sample_APKS_DEST_PATH)/$(notdir $(module)))
$(foreach module,$(sample_MODULES),$(eval $(call \
copy-one-file,$(module),$(sample_APKS_DEST_PATH)/$(notdir $(module)))))
sample_ADDITIONAL_INSTALLED := \
$(filter-out $(modules_to_install) $(modules_to_check) $(ALL_PREBUILT),$(sample_MODULES))
samplecode: $(sample_APKS_COLLECTION)
@echo -e ${PRT_TGT}"Collect sample code apks:"${CL_RST}" $^"
# remove apks that are not intended to be installed.
rm -f $(sample_ADDITIONAL_INSTALLED)
.PHONY: findbugs
findbugs: $(INTERNAL_FINDBUGS_HTML_TARGET) $(INTERNAL_FINDBUGS_XML_TARGET)
.PHONY: clean
clean:
@rm -rf $(OUT_DIR)
@echo -e ${PRT_TGT}"Entire build directory removed."${CL_RST}
.PHONY: clobber
clobber: clean
# The rules for dataclean and installclean are defined in cleanbuild.mk.
#xxx scrape this from ALL_MODULE_NAME_TAGS
.PHONY: modules
modules:
@echo -e ${PRT_TGT}"Available sub-modules:"${CL_RST}
@echo "$(call module-names-for-tag-list,$(ALL_MODULE_TAGS))" | \
tr -s ' ' '\n' | sort -u | $(COLUMN)
.PHONY: showcommands
showcommands:
@echo >/dev/null
.PHONY: nothing
nothing:
@echo Successfully read the makefiles. -
Acrobat installer (acrobatpro11_dlm) hangs indefinitely on Mac OS X Yosemite; known issue?
I'm trying to install Adobe Acrobat Pro XI on my machine, and downloaded the installer from cloud.adobe.com (I bought a subscription for Acrobat Pro). However, after I download and launch "acrobatpro11_dlm" from the disk image, the app just sits and does nothing (been waiting a few hours now). How can I debug this?
I just downloaded the latest installer from cloud.amazon.com. Same issue. I tried pressing Command + L after starting the acrobat installer, but I just get a system alert sound (the same sound you would also hear if you click on your desktop background of your Mac, with no files selected, and also type Command + L).
How can I get a refund for the past month, as I've been completely unable to use Acrobat??
Other threads where people are having the same issue:
Cant install acrobat pro on Yosemite
cannot download and install acrobat pro on yosemite
Re: Anyone know how to install Acrobat in Mac Yosemite? What the heck.
installation of acrobat 11 help -
Yosemite upgrade issue - iMac freeze and cannot boot again
Dear all,
Two days ago I updated my iMac 27" (mid 2011) from OS X 10.8.5 Mountain Lion to 10.10 Yosemite.
Clean installation was done via USB, 3 user created one admin and 2 standard users (all with the option increase contrast option on). The following software installed:
Adobe Lightroom 5.7
Datacolor Spyder4Elite 4.5.8 (monitor calibration)
Microsoft Office 2011
PlayOnMac 4.2.5
iMovie 2.1.1
VLC 2.1.5
Google Chrome
After one day I had the first strange reboot, but than it seemed working fine.
Today while using it, something strange happened: the image on the screen "shifted" 5cm to the left, meaning that the 5cm on the left of the screen were moved to the right and than everything freezed. With a power off I rebooted.
Thinking the issue was related to the screen I uninstalled and removed Spyder4Elite.
I rebooted and it was working fine.
After a while, the screen went almost completely blank, I could see the very top first 3/4 pixels and recognize the top bar. Nothing. After a while I forced a reboot.
I tried to reboot, but the same appears. I turned it off for a bit.
Turinig it on again the following happened:
Boot screen
White screen flickering black
Black screen
White screen
Reboot
White screen stating the the computer restarted after an error
Boot screen with pink vertical lines (see image below)
White screen
Black screen
Reboot
Start again at #7
Image for #7:
Image for #8:
I then turned everything off and disconnected the plug as well. After turning on again now everything starts directly at point #7 into an infinite loop.
I tried to start and hold "D" key for the diagnostic tools. Nothing happens boot and whitescreen.
If I hold the option key I can select the boot options, choosing Recovery 10.10.1, white screen appears and than reboot again.
Does anyone know what happened?
Does anyone else had a similar issue?
Is there a way to run diagnostic tool to check hardware failures?
Is there a way to browse the HD content to save a file?
Any other suggestions or ideas?
The only thing I have, is the USB key with Yosemite on it.
Fortunately on the external HD I still have the "Install OS X Mountain Lion.app": is there a way to create a bootable USB key of Mountain Lion using windows?
Thank you for your kind support,
blp
ps: ah.. Apple care obviously expired in August...
PDCBefore deciding that you can't replace the drive yourself, visit the following site and find the step by step instructions for replacing the drive yourself:
http://www.ifixit.com/
If you see the instructions and feel that you can replace the drive yourself, you will save money that way. I'm not that familiar with modern iMacs, but I know it was very easy to replace the drive in my old iMac. It may not be as hard to do as you think. If you want extra help, you can post questions on the iMac forum.
If you still don't feel like it is something you can do yourself, try looking for an AASP (Apple Authorized Service Provider) in your area and see what it might cost to have the AASP do the replacement. Often an AASP can do a repair for less money than Apple, and they will usually be willing to install a drive that you have obtained elsewhere for a reasonable price. From what I have read on these forums, many people have used AASP's to install bigger and faster drives on their machines.
Definitely contact Western Digital about your drive. Usually WD drives come with a 3 year warranty, and if the drive fails before then, WD will replace the drive. KT has mentioned that the drive apparently is not under warranty, but might qualify for some sort of an upgrade. Before shopping elsewhere, check to see if this upgrade might entitle you to a very good deal on a replacement drive or something of that nature.
Good luck! -
Hi,
I hope someone can address these issues. I don't know where I can send my questions. I have iMac late 2013 with Yosemite, iPad mini 2014 with iOS8.1, Apple TV 2 and Time capsule.
Here is what I have problem sofar:
Airdrop - If I try to Airdrop a link from Safari from Mac. There is a window open, I can see my iPad and the page I try to send, and nothing happens, the system blocks for a while and after the window disappear. Theres is nothing coming on the iPad. If I try to send a photo or a file via AirDrop it works in both directions;
Markup - I attach a photo from my Mac , I can see the small Markup icon on the upper right corner of the photo. I open it and there are different tools appearing - again the windows freezes and I cannot do any modifications on the photo. I have to restart the mail app.
Sound - Every time I restart the Mac the sound icon is inactive - I have to go preferences/sound and I can see that the aggregate device is selected instead of internal speakers - I have to change the sound output manually.
Launchpad - I have an empty app group which I cannot delete, nor change the names of other groups of apps.
Notification centre - cannot add or remove some of the stocks.
Finder - my iMac name is - iMacs iMac. All of a sudden it become iMacs iMac (2) and latter iMacs iMac (6). What are these numbers ?
Thank you very much,
If someone could at least tell me where to ask.
Nice day
PAvel
I had other issues i.e. wifi for which I found answers alreadyTesting in a new User will quickly tell you if the problem is system wide or if it's your User's folder that contains the problem.
CREATE A NEW USER
Go to System Preferences --> Create a New User in Users & Groups Switch to the New User by logging out/in or use Fast User Switching.
Enter your Apple ID and password.
Test Markup in Mail using the iCloud account.
Continue testing to see what works in the new User.
Do you still see the issue?
If yes, then the problem is with your base files.
If no, then the problem is in your User's folder.
Finder - my iMac name is - iMacs iMac. All of a sudden it become iMacs iMac (2) and latter iMacs iMac (6). What are these numbers ?
In System Preferences > Sharing you can see name. When Finder adds a number it indicates it's seeing another drive with the same name. You can select to rename but this could also be an indication of issues at the base level.
Do you have an external drive that could be used to clone your drive in case you need to do a clean install?
Maybe you are looking for
-
how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-"
-
I'm a seller on eBay and very new to Mac. I just started to list an item when I got to the area of uploading pictures of an item to my listing. I cannot figure out how this is done. I downloaded pictures from my camera to iPhoto and they apear not o
-
My daughter forget her password and now her ipod touch is disabled. Red message says to connect to itunes. When I do connect to itunes, the device is not recognized and then a message comes on the screen that says it is locked and to enter the pass
-
I went to Starbucks this morning and my Wi-Fi on my Verizon Iphone connected, what does this allow me to do? My Wi-Fi does not recognize my home network from which I connect wirelessly to my MacBookPro and to my Apple TV using Airport Extreme router,
-
D7100, .nef files will not open, batch rename naming files differently
I recently purchased the D7100/Nikon and I am having problems opening the nef files in Bridge and Photoshop CS6 (even after updating – Raw 8.4) and also renaming the files. Lightroom 4.4, no problem. I also tried batch renaming the files, and Bridge