You've Got to See This One

Hello All-
In this short screencast, it's difficult to tell, but you can see a clip that is set to play at 100% normal speed, playing back as if it's sped up, or dropping frames maybe.
I've deleted the clip in the Event browser and re-imported, I've used a DIFFERENT clip from the same Event, I've used a different clip from a different Event, and I've re-imported the original clip.
But each time I cut that segment into the timeline, it "speeds up".
Frame rate on the project timeline is 23.98fps and the clip is 29.97fps...but this is also the case with other clips.
Here is a short screencast to the problem. The clip in question has the retime editor open: https://vimeo.com/45406356
Any ideas are appreciated.
FCPX 10.0.4
Thanks.

Spam like all spam will originate from several sources (i.e. multiple accounts). You can block them all as they come in. If you do not want random spam messages to come in, it's best to set you privacy settings to "people in my contacts only".
https://support.skype.com/en/faq/FA140
With that setting enabled then only spam you could then receive is new contact request spam. Those pending contact requests can be deleted as they come in. There is no way to disable those. If you find it too arduous to remove pending contact requests the only way around that is to create a new account and keep it more private as the current account is probably exposed to too many spam lists.

Similar Messages

Anyone got answers to this one ???

Question 16 (40 marks)
Samantha Sunshine owns a fleet of bright yellow solar-powered taxi cars. She also owns a small garage where only one taxi can be checked or serviced at a time. Each taxi is identified by a name (such as Solar Wind) chosen by Samantha. She has asked you to write a program to manage information kept on her taxis. As part of the project, your task is to design and implement two classes: (1) Class Taxi to represent a taxi, and (2) Fleet to represent the taxi fleet. Each taxi has a name, the number of kilometers the taxi has traveled since its last service, and the number of trips it has done since its last service. The data kept on a taxi is updated as soon as it returns from a trip.
Definition of class Taxi Based on the above information, it is decided that class Taxi is to have three attributes declared as follows:
private String name;
private double mileage;
private int trips;
where mileage is the number of kilometers traveled since last service.
a) Define the constructor for the class. The constructor should take only one argument, the
name of the taxi.
b) Define the toString method that can be used to facilitate the testing of the class.
c) Define the update method that will be used to update the information of the taxi after
each trip it completes.
d) Define the reset method that will be used to reset the values of mileage and
trips each time the taxi is serviced.
e) Define all the get methods.
Definition of Class Fleet
Assume that class Taxi has been developed and thoroughly tested. You are now in a position
to develop class Fleet. This class stores and manages information about the fleet of taxis.
Functionality provided by this class should include methods to do the following:
? Add a taxi to the fleet
? Remove a taxi from the fleet
? Update the information about a particular taxi
? To reset the number of trips and the number of kilometers traveled for a particular taxi
? Determine the taxi to service next (see more information below)
You are told that the fleet is not expected to have more than 50 taxis. Using this information,
the attributes for class Fleet are declared as follows:
public static final MAX_FLEET_SIZE = 50;
private Taxi [] taxis;
private int taxiCount;
where taxiCount is the number of taxis in the current fleet.
f) Define the constructor for class Fleet.
g) Define method search( String name ).
This method takes as argument the name of the taxi to search for. If a taxi with that
name is found, the method should return the index of the taxi. Otherwise, it should
return -1.
(This method will be used by other methods of the class, for example, the addTaxi
that is defined next.)
h) Define method addTaxi( String name ).
This method takes as an argument the name of the new taxi and adds the taxi to the
fleet. It should check that the name is indeed new. To do this, it should make use of the
method search described above.
[4 marks]
i) Define a method to delete a taxi from the fleet.
[4 marks]
j) Define a method to update the information about a particular taxi
[4 marks]
k) Define a method to reset the number of trips and the number of kilometers traveled for
a particular taxi.
[4 marks]
l) Define a method to determine the taxi to service next.
As the garage can only service one taxi at a time, the taxi with the highest mileage since
its last service will be chosen for the next service. In cases of ties, one of the taxis will
be chosen. The method should return the name of the taxi to be serviced next.
[4 marks]

public class Taxi
   private String name;
   private double mileage;
   private int trips;
   private double kmtraveled;
      //constructor
      public Taxi(String name)
         this.name = name;
      public void update()
         trips = trips++;
         mileage = mileage + kmtraveled;
         //return trips;
         //return (int)mileage;
      public String toString()
         return " name "+name+" mileage " +mileage+ " trips " + trips;
}ah ok... ive changed it .. now it compiles.. the return of the values is done by the toString method so i axed the others..
now i need to create a method to reset the values of 'mileage' and 'trips' each time the taxi is serviced ... do you know how to do this ???

Iphone getting hot got replacement and this one is doing the same thing

After having it since November 2011 my iphone 3GS started getting hot to the touch last week and would not come on in any way. I went in and it was under warranty so they gave me a replacement and now this one is doing the same thing. UGH! Why?

Yahoo services have been having problems today, so I don't doubt that mail is one of them. They are having trouble updating the Weather app as well.
What is wrong with your voicemail. Remember that voicemail is a carrier function. The only thing Apple has to do with it is how it is retrieved. Can you describe your problem a little more clearly than "totally screwed up"?

Is anyone struggling to receive MMS on a 3gs sent on a 4S with IOS 6. I spoke to 02 today and apparently apple are working on a fix. I cant believe Apple didnt see this one coming or is it another cynical attempt to get everyone onto IOS6?

I have a 4Gs on IOS6 that wont sent MMS to a 3Gs using IOS4 something or other. I spoke to 02 today and they say there is an Apple fix on the way but there is something that can be tweaked in the meantime but she doesnt know what it is. Anyone having same problem?

By the way, may the Gods shrivel all Apple iphone software developers into a smoking crisp.

If you need cash better check this out...Attorney will show you how....

First of all let me say that THIS IS NOT SPAM!, A LOTTERY, A SCHEME, A CHAIN
LETTER OR A PIRAMID MLM.
Although it may take the appearance of a "chain letter" it is actually a
unique legitimate opportunity for individuals to start their own home based
business by becoming Mailing List Creators and Providers by PROVIDING A
SERVICE.
Dear Friends, Please read this all the way through..Its perfectly legal and it does what it says it will do..No hidden fees..$6,00 will start you on the road to wealth..:
Greetings: I am a retired attorney. A few years ago a man
came to me with a letter. He asked me to verify the fact that this was legal to do. I told him I would review it and get back to him. When I first read the letter my client brought me, I thought it was some "off-the-wall" idea to make money. A week and a half later we met in my office to discuss the issue. I told him the letter he originally brought me was not 100% legal. My client then asked me to alter it to make it perfectly legal. I asked him to make one small change in the letter. I was still curious about the letter, so he explained to me how it works. I thought it seemed like a long shot, so I decided against participating. But before my client left, I asked him to keep me updated on his results. About two months later, he called me to tell me he had received over $800,000 in cash. I didn't believe him, so he asked me to try this idea and find out for myself. I thought about it for a couple of days and decided I really didn't have anything to lose, so I asked him for a copy of the letter. I followed the instructions exactly, mailed 200 copies, and sure enough, the money started coming in! It arrived slowly at first but coming in nonetheless. I kept a precise record of the earnings, and in the end, it totaled $978,493! I could hardly believe it. I met with my friend for lunch to find out exactly how it worked. He told me there are quite a few similar letters around, but this one is different because there are six names at the end of the letter, not five like some others. This fact alone results in your name being in far more returns. The other fact was the help I gave him, making sure the whole thing was legal, since no one wants to take the risk of doing something illegal.
By now you are surely curious to know what small changes to make. If you sent a letter like this one out, in order to be completely legal, you must actually sell something in order to receive a dollar in return. So when you send a dollar to each of the names on the list, you must include these words, "PLEASE PUT ME ON YOUR MAILING LIST" and include your name and address. This is the key to the program. The item you will receive for the dollar you sent to the six people below is the letter. At the time I first tried this idea, I was earning a good living as a lawyer. But everyone in the legal profession will tell you there is a lot of stress that comes with the job. I told myself if things worked out, I would retire from my practice and play golf. I decided to try the
letter again, but this time I sent 500 copies. Three months later, I had totaled $2,341,178! Here are a few reasons a person might give for not trying this program: Some people think they can never make a lot of money with anything this simple. Some are afraid they will be ridiculed for trying Some dream of large sums of money, but do nothing to actually achieve it. Some are just plain lazy. Some are afraid of losing their investment. They think this program is designed to beat them out of a few dollars. The system works if you will just try it. But you must follow the simple instructions EXACTLY, and in less than three months, you will receive $800,000 GUARANTEED! Keep what you are doing to yourself for awhile. Many will tell you it won't work and will try to talk you out of your dreams. Let them know of your success after it works.
LETTERS FROM PARTICIPANTS IN THIS PROGRAM:
Larry McMahon, Norfolk, VA Six months ago, I received this letter and ignored it. Five more came within a period of time and I ignored them also. I was tempted, but I was convinced that they were just a Hoax. After three weeks of deliberating, I decided to give it a try (not
expecting much). Two weeks went by and nothing happened. The fourth week was unbelievable! I can't say I received $800,000 but I received $400,000. For the first time in years, I am debt free. I am doing this again, only this time starting with 500 posts.
INSTRUCTIONS: Immediately send $1.00 to each of the six people on the list at the end of this letter. Wrap the dollar bill in a note saying "Please add me to your mailing list" and include your name and address. Copy this letter. You do not have to type it 200 times. Simply place your cursor at the top of the page, hold it and drag it all the way
down to the end of the letter. Then click on "edit" and select "copy". Now open up a notepad file on your computer and put the cursor at the top of the page in the notepad, click on 'edit' and then select 'paste' and it will copy the letter for you onto your computer. Remove the name next to the #1 on the list and move the rest of the names up one position (#2 becomes #1, #3 becomes #2, etc.....) Then place your name in the #6 position. Then save it, make sure it is saved as a txt. file. This is very a very important step! When you have completed the instructions, take this letter and then go to (Google,Yahoo,Craigslist...) and type in (Money Making Message-board, or POST NEW MESSAGE OR JUST TYPE POST MESSAGE(THIS IS MUCH EASIER AND FASTER),...) and start posting your copy to 200 message boards, or more this is only the minimum, you can post as much as you like...The more copies you send the better the results. Keep a copy of this letter so you can use it a second time. Post it out again in six months, but Post it with the addresses you receive with each dollar. It will work better the second time. NOTE: This service is 100% legal - (Refer to title 18 section 1302 of the U.S. Postal & lottery laws) How does it work? When you send out 200 Posts, it is estimated that at least 15 people will respond and send you a $1.00. ($15.00) Those 15 will Post 200 Posts each and 225 people send you $1.00 ($225.00) Those
225 people Post 200 Posts each and 3,375 people send you $1.00
($3,375.00) Those 3,375 people will post 200 posts each and 50,625 people send you $1.00
($50,625.00) Those 50,625 people will post 200 posts each and 759,375 people send you $1.00 ($759,375.00) At this point your name drops off the list, but
so far you have received $813,615.00. P.S. When your money begins to come in, give the first 10% to charity with spirit and share a good fortune!
#1.Linda Marlow 124 Robinhood Dr., Cassville, MO 65625
#2.Kim Ambriz 991-c Lomas Santa Fe #359 Solana Beach, CA 95075
#3.Cheryl Berglund 2260 El Cajon Blvd. Box 411 San Diego, CA. 92104
#4.Johnathon Stolzenberg 930 W. 35th Place Chicago IL, 60609
#5.Craig Woods 8921 W. Courtland Ave. Milwaukee, WI 53225
#6.John Goettge 5268 Seibert Hill RD SW New Philadelphia,Ohio 44663
This really, really, works! I tried it once and I'm doing it again. First to be honest I only posted 145 posts and I didn't receive a lot only $6,689.00 in 3 months, at least this means that it really works, so this time I'm posting 604 posts and I've got so far in 2 months $15,640.00 this is really like a dream come true. So go on and try it
trust me you've got nothing to lose.... Important tip - Cover money by paper fully by which it can not been seen in light, because postal employees do some cheat some times....ok. THIS IS YOUR CHANCE. THE PLAN IS SO SIMPLE, IT'S ELEGANT. DO NOT DELAY. START RIGHT NOW! YOUR RISK IS ABOUT $6 AS I SEE IT. THIS IS A LEGIMATE BUSINESS VENTURE THAT RESULTS IN TAXABLE INCOME. BE SURE TO FOLLOW THE INSTRUCTIONS TO THE LETTER IF YOU ARE COMFORTABLE WITH BECOMING WEALTHY! GOOD LUCK.

Designer Handbag 
Rolex Replica 
Cheap handbag 
Swiss-made 
replica vuitton 
Replica Watche 
Designer Replicas 
Replica Watch Sale 
Louis Vuitton 
Fake Rolex 
Wholesale Replica 
Swiss Rolex 
Louis Vuitton Purses 
watch part 
Wholesale Louis Vuitton 
Authentic Swiss-Made 
Counterfeit Louis Vuitton 
buying watch 
Fendi Replica 
replica Submariner 
Vuitton Bag 
rolex air king 
LV Knockoffs 
rolex Day Date 
LV bags 
rolex Daytona 
replica wallet 
rolex datejust 
replica purse 
rolex explore 
vuitton wallet 
rolex milgauss 
knockoff handbags 
rolex GMT 
Burberry Handbags 
rolex sea dweller 
Burberry Wallets 
Rolex Yachtmaster 
Chanel handbag 
Swiss Replica 
Fendi Handbags 
Tag Heuer Replica 
Gucci bag 
Omega Watches 
J.P.Tods

HT5622 Do you think that apple would exchange my ipod gen 5 for another one because this one well, the screen isn't broken but the inside is half black and other colors? When it happened it was in its otter box, and i lost the receipt and got it on may?

Do you think that apple would exchange my ipod gen 5 for another one because this one well, the screen isn't broken but the inside is half black and other colors? When it happened it was in its otter box, and i lost the receipt and got it on may? How much do you think it would cost please help me.

If covered by warranty. See:
Apple - Support - Check Your Service and Support Coverage
Then if the iPod is within warranty, not abused Apple will exchange it at no cost. You can do it at an Apple store
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I have an iPad mini that somehow got locked. The wrong passcode was entered several times and it became disabled. No one has helped so far hoping for someone to see this and help

Seems simple right? Hook up to a computer and restore and bypass disable screen? NOPE. Everytime I tried to connect it to iTunes it gives me a lovely message that says something to the effect of " cannot sync to itunes because passcode needs to be entered on iPad" but the iPad mini says it is disabled so I am getting the total run around from this devil spawned tech.
I tried to also restore it in recovery mode like someone suggested but it still said the same thing. The person said if I followed instructions it would not do that. Well, it did. Here is exactly what I did:
Itunes has detected an iPad in recovery mode. You must restore this iPad before it can be used with iTunes". and the iPad mini has the itunes logo with the USB cord and an arrow on it on the screen. I clciked ok on the computer to shut that message off.
On iTunes it says "Ipad recovery mode. Your software is up to date. Click check for updatr to see if new software is available." The check fo update button is grayed out and the Restore iPad button is available to click. I click on "restore iPad" and a pop up says "Are you sure you want to restore the ipad to its factory settings? All of your media and other data will be erased, and the newest version of the ipad software installed. Itunes will verify the restore with Apple. After this prcess is complete, you will have the option to restore your contact, calendars, text messages, and other settings."
I clicked on "restore and update" and it shows a box with software update 7.0.4 and I click on next. I accept the user agreement and it starts to download the ipad software update.
I wait for the update to install and as I am waiting a box pops up that says "itunes could not connect to the ipad because it is locked with a passcde. You must enter your passcode on the ipad before it can be used with itunes" and it gives me the option to click more information, try again, and cancel.
So what do I do now?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
            iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.
If you cannot manage any of the above then:
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

I finally got my iphone fixed! Just wanted to say thanks to Austin! Not sure if you can see this but thanks a whole bunch! I wish you the best of luck in hopefully going to UT and in running your business!!!!-Tristian!

I finally got my iphone fixed! Just wanted to say thanks to Austin! Not sure if you can see this but thanks a whole bunch! I wish you the best of luck in hopefully going to UT and in running your business!!!!-Tristian!

Austin who?

I recently got an IMacSnow(G4) and installed a larger HD. When I try to load 10.4 it gives me a message: "You must update your computer's firmware before installing MacOS". Never saw this one before. What gives?

I recently bot an IMac Snow G4 and installed a 40G HD. It has 640 mem. When I try to load Tiger, I got a msg: "You must update your computer's firmware before installing Mac OS". Never saw this one before. What gives?

Hi, is this a G4 Lampshade iMac, or a G3 Snow iMac?
http://www.everymac.com/systems/apple/imac/specs/imac_600_graphite.html
http://en.wikipedia.org/wiki/IMac_G4
Anyway, you'll need OS9 installed to do the Firmware install...
http://support.apple.com/kb/DL1283
http://support.apple.com/kb/HT1395?viewlocale=en_US

See if you can figure this one out...

First off, I use FireFox, not Safari (Safari is great, but FF works better for me)...
So here's the deal: I use MySpace as means of making some important contacts. I have a Power Mac G5 connected to a Linksys router (Model# RT41-BU) which is behind a Motorola SB-5100 cable modem. I also have three Windows XP machines on the same network.
I have no problem with any other website except MySpace. As soon as I log in, I can usually get to 2-3 pages fine. As soon as I click to access probably the 4th page, I start timing out. My computer will stall for up to 1-2 minutes. Eventually the page will either load (usually just partially at this point) or I will get a time-out error (btw, by "stalling" I mean I just sit there and wait, and wait, and wait for a page to load...NOT that the actual computer has frozen and is not responding).
If, after getting the time-out error, I then click “Try Again” the page will usually then IMMEDIATELY load w/ no problem (occasionally I will get the timeout page again after a few minutes).
If I choose to QUIT Firefox during the stalling, but BEFORE I get the time out error, and immediately open it back up, I start stalling again (at this point it’s merely trying to load my homepage, which, of course is apple.com/startpage).
If I try to go to the EXACT same pages on my Windows XP machine using Firefox I have absolutely NO problem loading any pages whatsoever…UNLESS:
If I, again QUIT Firefox on my Mac BEFORE getting the timeout error…walk 5 feet over to my Windows machine and try to load my home page (Yahoo.com), it will stall. I usually have to then wait about 1-2 minutes, and it will start back up again, and I then have no problems.
Here’s where it gets REALLY interesting:
If I DISCONNECT my Linksys router, and plug my Mac DIRECTLY into the back of my cable modem (in other words, disassemble the network, and have the modem shooting stright to the mac), I DON’T have this problem. I can log into MySpace hit any page, just as I can with my Windows machine.
Because the problem DOES NOT occur to my Windows machine while it’s ON the network, and DOES NOT occur with my Mac when it’s OFF the network, all signs point to some sort of issue with certain Macs running on certain Linksys routers. There must be some sort of conflict between the two, but I IMAGINE that there HAS to be either some sort of tweak or some sort of patch that will fix this issue.
I have had this issue from day one of owning this computer (about 4 months). It has never worked on the router properly.
I have tried reformatting the machine and reinstalling everything. No change.
I have tried lowering the MTU on both my router configuration and mac network config anywhere from 1400 to 750, with no noticable change.
I have tried several different browsers (Firefox, Safari, IE for Mac & even Opera) but still have the same results.
I’ve gone into the “about:config” page of Firfox and turned on network.http.proxy.pipelining and set the max requests to 16, with no new results.
I have tried disabling javascripting…nothing.
I have also tried contacting Linksys, and the only thing they can suggest is lowring my MTU again (It’s obvious by talking to them that English is also not their first language)
Here’s something weird as well:
WHILE the page is stalling to load, I can open the Network Utility and run a continuous ping to the page I’m trying to hit and get a consistent response on EACH ping, even though the page won’t load.
My cable modem and router BOTH operate on DHCP (IP address and DNS servers are assigned automatically – NOTHING that I know of is entered in statically).
The only thing I haven’t tried is upgrading the firmware on my router. I’d really like to use this as a LAST resort – HP ruined a DVD writer I had once with a firmware upgrade that went wrong.
I’d really like to get this fixed. I have friends in a band that are out on the road right now, and with the exception of wasting valuable minutes on my cell phone, this is the only way I have of keeping contact with them. It’s really irritating that I have to use my Windows machine…despite the fact that it’s only a few feet away, I SHOULDN”T HAVE to.
Anyone want to try and tackle this one?
Much appreciated,
--Jbj

Hi bmb,
So here's the deal: I use MySpace as means of making some important contacts. I have a Power Mac G5 connected to a Linksys router (Model# RT41-BU) which is behind a Motorola SB-5100 cable modem. I also have three Windows XP machines on the same network.
Does this happen only when you try to access MySpace website? Any other website works fine?
If I DISCONNECT my Linksys router, and plug my Mac DIRECTLY into the back of my cable modem (in other words, disassemble the network, and have the modem shooting stright to the mac), I DON’T have this problem. I can log into MySpace hit any page, just as I can with my Windows machine.
Smells like DHCP spaghetification...
I have tried reformatting the machine and reinstalling everything. No change.
No good, unless you tried anything funny when installing MacOS X, networking issues have are not magically fixed by re-installing the OS. This is a habit coming from the Windows world...
My cable modem and router BOTH operate on DHCP (IP address and DNS servers are assigned automatically – NOTHING that I know of is entered in statically)
What about your Mac (and the rest of your PCs)? How do they get their TCP/IP settings (manually or via DHCP)?
Your issue(s) smell DHCP big time, go to System Preferences-->Network-->Ethernet/AirPort (whatever you use to connect) and click on the TCP/IP tab. Set Configure IPv4 to Manually and post back.
How are your computers connected to the Linksys box (wired/wirelessly)?
Macs running 9.x, Macs running 10.4.x and SGI workstations running Irix 6.5.x

HOW DO YOU TURN OFF "FIREFOX PREVENTED THIS PAGE FROM AUTOMATICALLY RELOADING". I did the "see Advanced - General - Accessiblity. and still having problems

HOW DO YOU TURN OFF "FIREFOX PREVENTED THIS PAGE FROM AUTOMATICALLY RELOADING". I did perform the "see Advanced - General - Accessibility. It worked for me and my "user" site (don't know how to say my site) and still having problems with my wife's. I have gone to OPTIONS → GONE TO → ADVANCE and CLICKED THE LINE → ""Warn me when websites try to redirect or reload the page…""
This did not rememdy the problem. I did try to get on the other site suggested
http://kb.mozillazine.org/Accessibility.blockautorefresh
but got a 404 error...
I have googled the "ff prevented...." and after a number of hours searching I still have not found a fix...
REALLY HOPE SOMEONE CAN HELP ME....
JM

You should still disable this setting:
*Firefox > Options/Preferences > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
The setting in "Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
What is the value of the accessibility.blockautorefresh pref on the about:config page?
*http://kb.mozillazine.org/accessibility.blockautorefresh
If you have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

So you think you are an Java uber-geek? Then figure this one out. . .

Ok, uber-Java geeks, let's see if you can figure this one out. It' s butt-ugly and got me totally stumped.
This is in a Tomcat 5.5 environment.
I have a jsp (hierarchy.jsp) which has static nested class called MgmtAuthBean. This hierarchy.jsp creates a TreeMap object which contains instances of the static nested class, MgmtAuthBean. So, after compilation of the hierarchy.jsp, I end having 2 jsp's:
hierarchy_jsp.java <==== original jsp
hierarchy_jsp$MgmtAuthBean.java <==== nested static class jsp
Ok, easy to understand so far. . .now for the rub. . .
The hierarchy_jsp.java then saves the TreeMap object in a session.
Another servlet (ExcelServlet) then accesses this saved session object, but in the process of reconstituting the TreeMap object, it requires access to the nested static class hierarchy_jsp$MgmtAuthBean.java.
The problem is that ExcelServlet craters because it can't find hierarchy_jsp$MgmtAuthBean.java in order to reconstitute the TreeMap object.
Since jsp's are dynamically created when called, how do I point either the Tomcat container or ExcelServlet to hierarchy_jsp$MgmtAuthBean.java?
For reason's too stupid to explain, I can't get rid of the static nested class, so I have to figure out how to make this work. . .
:)

Tomcat provides a utility for pre-compiling JSP into Servlet class files. This can also be done in ANT. You can precompile the JSP which will create the inner class file and then compile the Java files that need the inner class file. It may take some tweaking to get all of the classes to compile in the correct order.
A possible alternative is t have the inner class implement an interface. the hierarchy_jsp can then refer to the contents of the TreeMap as instances of the interface instead of as instances of the inner class.

"You've got a PIX or FLIX message! To see it, visit..."

On my Droid Charge, for a year and a half pictures in a message came through just fine, and I could send pictures as an attachment, no problem.
Starting several months ago, I can no longer send pictures, and when one is incoming I get the "You've got a PIX or FLIX message! To see it, visit..." .
I go there, it makes me sign in. Then I get this...
Sorry, it appears you do not have an active account.
New Multimedia Messaging accounts are unable to be created
because the service is being upgraded to Backup Assistant
Plus...Verizon Wireless new cloud service.
With the Backup Assistant Plus you can....
Get 500 MB of cloud storage FREE.
An app for your mobile phone, tablet, computer and web
(all FREE).
Use the web app composer to share your photos with
friends and family.
Plus...the cloud keeps your media in sync so you can enjoy
your photos, videos and music from anywhere!
Activating your cloud takes less than a minute.
Activate FREE
Account
Learn More
"Activate FREE Account" does nothing, closeing the pop up takes me to my account page.
Free cloud storage is already active, there is no "way out "button. <Cancel> exits, <Reset> removes changes, and <NEXT> is grayed out.
So that's as far as I can get. nothing in your "Support" pages addressed this. The other people reporting if seem to get no real reply.
If I can't get it working by next week I'm going to a different phone company.

I can understand why you're NotSoHappyRightNow and I'm here to help! It sounds like your account may not be provisioned correctly for picture messages. This can normally be resolved easily and doesn't involve buying a new phone and switching companies. Let's first check and few things on the phone. Reboot if you haven't already. Clear out old message threads. Try sending yourself a picture message to see if it sends and receives. If still having issues, respond to my follow request and send me a private message so that I can review your account.
MarquiaF_VZW
Follow us on Twitter @VZWSupport

Hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

hey sur. my name anas and am from morocco i've just got a new iMac 2011 with OSX 10.7 and i want to downgrade to 10.6 please could you help sur to solve this it

anas guellaf wrote:
it still make 3 bips before starting the IMAC.
That is another problem not related to the Mac OS X version you are trying to use.
Three beeps at startup means you have a bad ram module in the computer. Did you install the ram or did it come from another owner this way? The first problem you need to solve is the bad ram.
When the iMac starts, go to the apple left side of the menu bar, About This Mac, More Info, System Report, Hardware, Memory and see what the report is on the memory...does the iMac report all memory modules that have been installed as OK or does it show bad memory? If there is not any information, you then need to remove the memory modules and restart one at a time to see which is bad.
On the bottom of the screen there should be a small door that you can remove with a small screw driver. You need to lay the iMac flat, disconnect the power cord, remove that small door and remove the memory modules. You can then put two in (if it has four) and see if it starts without the beeps. Do that with each module so you find out which is bad. Once you know the bad memory, you can buy a new module, just like the ones installed, so the iMac starts without the beeps.
Next, you cannot use a DVD for another computer for your iMac unless it is from one that is identical to yours. So, you need to talk to Apple and have them send the DVD for your particular iMac.

How can I mark event as "done" so that I see this at one glance?

how can I mark an event on ical as "done" so that I see this at one glance? In outlook this was possible, there was a white line on the left once I had marked the event as "done".

Greetings,
If you are new iCal user read this: http://support.apple.com/kb/HT2513
Events are more along the lines of a...well...event "Appointment with Dr. Smith"..."Travel to Mexico"..."Jon's Birthday".
What you are describing is what I would call a task. iCal offers "To Dos" for that purpose which include a check box for completion.
Cheers!

You've Got to See This One

Similar Messages

Maybe you are looking for