YTD calculation from BEx is not working in Advance Analysis for OLAP/OR Office

I have AA for OLAP based on BEx. There are YTD calculation in BEx Designer: User enters Period in variable, and in user exits, the Period Range is populated as "1 ~ UserEnteredValue" in second variable. In BEx, YTD is calculated based on the Restrictive KF for the period range, calculated in User Exit. This is working fine in BEx Analyzer, however in Advance Analysis (for OLAP OR in Ofice), the YTD value is not coming up they way it is in BEx Analyzer...
Anybody has any clue, why??
Thanking all of you in advance  

Hello Sharma
If something is working for BEx Analyzer but not for Analysis OLAP or Analysis Office then this typically (but not always) indicates an issue with the BICS (BI Consumer Services) component.
I would suggest you contact support about this so the appropriate logs can be captured and the issue investigated by the BICS team.
Regards
Ian

Similar Messages

  • BEx formula change not working in existing Analysis for Olap/Analysis for Excel reports

    Hello all,
    I posted this in Analysis for OLAP, but there has been no response so I'm hoping perhaps you BEx experts can help me.
    I had to modify a formula in a Bex query to have it calculate the results of the formula by summation.
    I checked the query using BEx Analyzer and it summed correctly.  If I create a new analysis for olap report, it sums correctly.
    If I modify an existing report, it does not pick up the change.  Existing Analysis for Excel reports also do not pick up the new summary calculation.
    Using the CMC, I edited the connection and reselected the Bex query, but that did not work either.
    Here it is working in the query:
    Line Discount is a formula with logic checking to see if "product list price total amount" is 0, set the line discount to 0; otherwise calculate it as "product list price total amount" - Net Sale.  So the total needs to sum of the line discounts (0+2820+2820 = 5640) and not be the Overall result "product list price total amount" - Overall Result "net sale" (13960-96720= -82760).
    Here it is in an existing Webi report - working:
    Here is what is happening in an existing Analysis for OLAP report - not working:
    I also tried to unselect Line Discount as a key figure from the existing report and reselect it, but that did not work.
    I'd like to find a solution so that all the reports that use this query won't have to be rewritten.
    I'm on BW 7.0 EP 1 SP 10 and BI 4.0 SP7 Patch 5.
    Thank you for your help,
    Susan

    Hi,
    Apply Exception aggregation on line discount formula--Exception aggregation as Total---Reference characteristic as Promega product.
    Make sure to refresh the webi report once after the changes has been done.
    If this does not work then you can apply summation calculation for that column at webi level as well.
    Regards,
    AL

  • Consuming PI Webservice from Webdynpro Java Not working

    Hello SAP,
    Environment: CE 7.2.
    Resolution expected immediately, Helpful answer is highly appreciated.
    Is the namespace should not exceed 60char for PI Webservice, for executing the webservice from Webdynpro Java.
    I tried with all the options in executing the PI Service from Webdynpro Java, None of the options worked. I am facing the below error while I was calling the PI Webservice.
    I don't see any problem from Webdynpro Java, what ever the procedure I have followed is the standard procedure.
    Fortunately when I execute the service from Webservice Navigator, it is working as expected. The same webservice when I consume it from Webdynpro Java it is not working
    Options tried so far:
    1) Published the Services to Service Registry and there by consuming the PI Service from Service Registry - Not worked
    2) Tweaked the URL with few options - Not worked (Tweaking the URL, ex: portType, Binding)
    3) Changing the Business Systems in PI and there after calling the service - Not worked
    4) Initializing the code, instead of creating Service Controller and calling the PI Service - Not worked.
    5) Created a Provider System and tried to call the PI Webservice from Provider System - Not Worked
    For all the Options, I am facing the same error which is provided in the screenshot.
    Below procedure which I have followed for calling the PI Webservice:
    1) Created Adaptive Webservice Model
    2) Provided PI Webservice URL (It prompts for PI System UserId and Password)
    3) Selected Option - No Service Group Configuration
    4) Provided Logical Destination
    6) Completed creation of Model
    7) Added the model as a UsedModel
    8) Right Click on Comp Contr. and selected Apply Template and Created a ServiceController for the model (Entire mapping to comp contr, Initializing the nodes is taken care by Service Contr.)
    9) Created an Template Action button and there by calling execute method which is auto rendered from CompContr..
    10) Build the project.
    11) Activated the code and Run the Application.
    12) Getting the below error which is showed in the message.
    ERROR MESSAGE:
    Exception on execution of web service on destination 'GetPIHRPeopleData' for operation 'SI_CreateHRPeopleData_OS' in interface 'SI_CreatePeopleCompany_OS'

    Hi Sankar,
    If the webservice is working fine in the Wsnavigator then there is some problem with importing the webservice in webdynpro for Java. Please check the required parameter for creating the Adaptive Webservice Model. After adding in the used model and compoent controller binding, you need to write code for to execute the webservice model.
    Please check the code for initialization and execution for the webservice and then test it.
    Best Regards,
    Arun Jaiswal

  • Select * from tab is not working in oracle 10g

    select * from tab is not working in oracle 10g. But at the same time,
    select * from <<table>> is working.
    Please advise me.

    This works for me in 10.2.0.2
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    SQL> select * from tab;
    TNAME                          TABTYPE            CLUSTERID
    LOAN_DETAIL                    TABLE
    PLAN_TABLE                     TABLE
    ...

  • When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

    When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

    If you see a red light in the audio output port, then the internal switch is stuck.  Insert the earphone plug a few times and see if you can trip the switch.  If that fails, insert a cocktail stirrer and the like and jiggle it around inside.  If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
    Ciao.

  • Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

    I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

    if there's a problem with the number of installations, you'll see a message about an excess activation problem.
    if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
    otherwise, attach a screenshot of the error message or quote it.

  • Get-MailboxSentItemsConfiguration Set-MailboxSentItemsConfiguration From Only (still) not working

    Hello,
    I would like to ask a question, hopeing it is resolved in some way and i missed it.
    I have installed SP3 Rollup 4 on our Exchange 2010 server.
    This added 2 new Powershell commands
    Get-MailboxSentItemsConfiguration
    Set-MailboxSentItemsConfiguration
    This can be used to manipulate where mail is stored in the send items.
    Sender - e-mails sent using SendAs or Send-on-Behalf-of permissions are saved only in the Sent Items folder of the Sender (UserA);
    SenderAndFrom – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of the Sender and the mailbox on which the permissions are assigned (in our example, both UserA and UserB);
    From – e-mails sent using SendAs or Send-on-Behalf-of permissions are saved in the Sent Items folder of only the mailbox on which the permissions are assigned (in our example, UserB)
    What we really want it to use the From only way.
    We use a shared team mailbox and use that as primary, as a second mailbox users get a trusted non shared mailbox. Mail sent from the trusted mailbox should only be in the send items from the actual sender, not both.
    2 sites report that the From field is reserved for Future Use, or bugged and does not work is intened.
    Here is is stated on 1 July 2013
    http://technet.microsoft.com/en-us/library/jj884078(v=exchg.141).aspx
    From Reserved for future use. To save the messages sent as this mailbox in the Sent Items folder of this mailbox, use SenderAndFrom value.
    That was on 26 March 2013
    http://www.msexchange.org/kbase/ExchangeServerTips/ExchangeServer2010/OutlookOWA/sent-items-behavior-shared-mailboxes-update.html
    NOTE 1: the From value does not work as expected... It basically performs the same action as the SenderAndFromvalue, meaning it saves the e-mail in both mailboxes. This is still the case in Rollup 5 v2.
    We are on 3 March 2014 now, is this still bugged, did i miss something, or is there an ETA when this will be fixed ?
    Looking foward to any replies.
    Kind regards,
    Jeroen van Velzen

    I am using a shared mailbox (with a disabled account) where I get sent items and also deleted items placed in the right folders.
    I think it’s just a matter of how you configure Outlook. It works well for me in both Outlook 2010 and Outlook 2013, cached mode and also online mode. You can add a shared mailbox to your Outlook profile in at least two ways where one of them doesn’t work
    but the other does.
    If you add the shared mailbox via the File tab/Account settings/New/ and just enter the e-mail address of the shared mailbox in the Auto Account Setup page. No name, no password, just the e-mail address and click Next and voila “Your e-mail account is successfully
    configured”. After restarting Outlook you will find the shared mailbox below your own in the left pane.
    If you click the inbox ones in the shared mailbox and then open a new mail you will see the shared mailbox display name in the From field. After sending the mail you will see the mail in the Sent Items folder of the shared mailbox. If you delete a mail in
    the shared mailbox you will see it in Deleted items folder of the shared mailbox.
    The prerequisits for this is that you have “full access” and “send as” rights of the shared mailbox.
    This was accomplished without using the Set-MailboxSentItemsConfiguration command.
    We are running Exchange 2010 SP3 RU4.

  • Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help!

    I updated to Yosemite, now my laptop keyboard does not work in MS Word for Mac. Help! Any suggestions for fixing this?

    Did you ever get a solution to your problem? Because I am having the same problem. I was actually in the middle of using Word when the keyboard stopped working. But it works in other apps, including in Excel.
    Thing is that my laptop just got back from Apple for repairs and they replaced everything but the display - including the hard drive.
    So not only do I have plenty of hard drive space, but it should be virus and error free otherwise.
    I have only installed a few programs and redownloaded some of my files from places like Dropbox, but otherwise is essentially a new system.
    Oh - and it came with Yosemite, so I did not upgrade to Yosemite and still Word doesn't work.
    I've always had trouble getting Word to play nice with my Mac but that was also with the old, full hard drive.
    This is a fresh install. And since I lost all my files, I only had like 1 old file I have downloaded from email and accessed and was in the process of
    creating a new file when it crashed. I got no error, the keyboard just stopped working (to type). I also cannot even get Word > Preferences to even open,
    so it is completely unresponsive.
    I did a Google search and under the Microsoft communities two suggestions to that person were that there may be multiple copies installed -
    I have only the one - and that one is in the wrong place - again, I only have the one and it installed to the Hard drive (visible in Launchpad / Apps).
    Another suggestion was that there was some problem with the updates. I ran updates and they installed fine. That helper suggested that the user
    may have had different updates that worked for the other Office apps (Excel, PPT etc.) but not Word and that was at least part, if not all of his problem,
    but all my Office apps show the same update version 12.3.6, so that cannot be the issue with me.
    I've not yet tried uninstalling and reinstalling, but as I got no errors on the original install or updates, I'm not sure if that would fix it.
    I've found that Mac just doesn't play nice with some programs at all.
    And even though I have a factory installed version of Yosemite on a new, fresh hard drive, even when I booted up, my iPhoto app (which is empty) crashed. I am not sure if my iPhone or iPad was charging at the time, but I don't think so. iPhoto that I still have not even used has crashed several more times since, most notably when plugging in my iPhone / iPad to charge, namely when I declined to upload photos (by default) to DropBox. That may not be related at all, but thus far seems the only other problem I have encountered until this Word problem.
    I'm on a MacBook Pro, Sept. 2009, running OS X Yosemite 10.10.1 factory installed from Apple repairs running Office: 2008 for Mac (Home and Student edition).
    Please advise if you found a resolution and what it was.
    Thanks

  • The giant seach bar in the center of the home page does not work, what is this for? also under it is a bar with no title?

    there is a search bar in the middle of the home page, I tried using it and it does not work. what is this for?

    Battery does not appear to charge
    Important: iPod touch cannot be charged with a FireWire-based power source.
    Verify that the power source being used is working properly.
    If connecting to a computer's USB port, verify it is a high-powered USB 2.0 port. Note: The USB ports on most keyboards don't provide enough power, so if you're connecting iPod touch to a keyboard, make sure it has a high-powered USB 2.0 port.
    Verify the computer is turned on and not in sleep or standby mode. If iPod touch is connected to a computer that's not turned on or is in sleep or standby mode, the iPod touch battery may drain.
    Try another USB port.
    Try charging from a USB charger if available.
    If that does not help, try another USB cable if available.
    Learn more about charging the battery.
    The Home button isn't working
    Put the iPod Touch to sleep.
    Wait a couple of seconds.
    Press the Home button.
    iPod Touch should wake up.
    If iPod Touch does not wake up, then iPod Touch should be serviced.
    Resources for Service
    http://support.apple.com/kb/he57
    https://selfsolve.apple.com

  • I have created an apple id but it will not work on my pc for icloud.How do I sign into icloud?

    I have an apple id but that id will not work on my pc for icloud..How do I get an icloud id?

    To enable iCloud on your Windows PC,
    first set up iCloud on your other (Apple) devices,
    then install the iCloud Control Panel for Windows...
    From Here  >  http://www.apple.com/icloud/setup/pc.html

  • I am using iphone 4s and just updated ios6 but my apple map is not working please help me for the same

    Dear all,
    as i am using i phone 4s in INDIA, today itself i updated my phone to operating system ios6, but my map of phone is not working , so please help for same.Its says "direction could not be found ", when i select the starting point and end point, go to start.
    With Regards
    Anurag

    Friend,
    refer to following discussion on the same
    Apple maps very disappointing

  • HT201406 my ipad touch screen is not working please give solution for it.

    my ipad touch screen is not working please give solution for it.
    i have connected ipad to itunes and done it restore seetings then also my touch is not working but
    when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

    If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
    Regards.

  • Excel export in analysis for olap not working

    Hello!
    I want to export from analysis for olap 1.1 to an excel file.
    First I clicked on the export button, then I chose the wanted compontents and clicked ok.
    But there happens nothting, but a new browser window opens and closes itself immediately.
    Neither a dialog opens and asks where I want to save this excel, nore I found a related excel-file in my system.
    Any ideas on this problem?
    Regards,
    Kathi

    Hi Kathi,
    finally we solved the porblem. i guess you are working with IE 8.0?
    *if so, add the BO-Server (http://server.com) to your lokal intranet sites (inside the IE 8.0).
    *also check document mode in IE 8.0 is set to Quirks Mode (under ''Tool/Developer Tool'') when opening the analyis olap report
    then it should work.
    regards
    Tom

  • I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    I am using iPad1. Running v4.3 and when connecting to wifi iPad keyboard does not work. Keyboard works for everything else including typing this question out. Why would it not work when typingin password for wifi connection?

    Kowhai wrote:
    Lots of WIFI needs a username and password to get access. I guess you're lucky and yours is set up unsecured.
    Normal secured WiFi requires only a password to get access. The password is used to encrypt traffic between your device and the WiFi access point. If whatever you are using requires a username as well then it is not simply normal secured WiFi. It might be a subscription WiFi service like GOGO, ATT, etc., or a service with authentication, i.e., college campus, etc. To help you out we need to know what you are using and what connection dialog you are being presented with. You don't have exactly the same problem as the original poster. He is having a problem entering a password into the password dialog that iOS presents when one tries to connect to a normal secured WiFi network. Could you clarify exactly which WiFi service you are using.

Maybe you are looking for