'Z' program with trabstrip and user autorization for visualizing

Hi
There's a 'Z' program which contains tabstrip for user option, then an ALV is showed but not all the user must see all ALV, how can I do for this because  it's just one program.
Thanks in advance.

Hi,
if u do not use authorization object, then u can do this think using z-table,
create a Z-TABLE and enter the one fields 1.  block_user.
then create table maintenance of the table and enter the user name witch u want to block .
and in the program  check the value
if sy-uname =  block_user.
message ' u r not authorized'.
else.
display Report.
endif.
Regards,
Abhilash

Similar Messages

  • I use a Win7 PC with iCloud and Outlook 2010 for syncing my calendar and contacts. I can enter data in my Outlook Calendar and it will appear in iCloud, but data entered in iCloud does not sync back to Outlook.  ICloud syncs to my iphone fine both ways.

    I use Win 7 PC with iCloud and Outlook 2010 for syncing my Contacts and Calendar.  They have stopped syncing...mostly.
    Now, appointments I enter on my local Outlook (iCloud) Calendar goes up to iCloud fine.  But, data I enter on iCloud directly does not come down to my local Outlook iCloud Calendar.  If I reboot the computer, the iCloud data shows up.
    Also, Contacts I try to enter on my Outlook (iCloud) Contacts goes up to iCloud fine, but does not show up in my local iCloud Contacts.
    All syncing works with my iPhone.
    I have signed out of iCloud on PC.  I have stopped syncing and re-started.  No change.
    I have an .aplzod folder for iCloud.  I have a separate Earthlink.net.pst email account in Outlook and a me.com.pst Outlook email account (which I don't actually use) listed under Data Files.
    Any help would be appreciated.  Curious that Outlook will upload to iCloud but not receive downloads unless I reboot.  However, rebooting does not download the missing Contacts.
    Jim Robbins

    Hi Jim!
    You've started off with some good troubleshooting steps, so let's see if we can take this a little further and figure out what the issue is with your iCloud contacts and calendars. I have two articles here that will help you troubleshoot this issue a little further, but the troubleshooting steps for both articles are exactly the same, so I will lay those out for you here:
    Note: When using iCloud Control Panel 2.0 and later, iCloud Calendar event descriptions in Outlook 2010 do not support text formatting (bold, italics, or underline), HTML, images, or attachments. The contextual (right-click) menu has also been disabled.
    If you are having trouble with a PC (with Outlook 2007 or 2010) and iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
    Verify that you are using a Windows configuration that is supported by iCloud. For more information, see iCloud system requirements.
    When enabling Calendars in the iCloud Control Panel, part of the setup process is to copy your Calendars data from the default Outlook ".pst" file to iCloud, and then remove the Calendars from the ".pst" file by placing them in the Deleted Items folder in Outlook. The Calendars data is then stored in the iCloud data set within Outlook so that changes can be pushed to and from Outlook by iCloud. Be sure you are looking for your data within the iCloud dataset within Outlook after enabling Calendars in the iCloud Control Panel. The deleted files can be seen by viewing Deleted Items within your Outlook Folder List. This is not iCloud removing your data; iCloud simply copies your data into the iCloud data set and then removes the local Calendars data by placing it in the Deleted Items folder.
    Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in Outlook. Click here for more information about troubleshooting your Internet connection.
    Open a secure website to test if you are online as is necessary for iCloud Calendar. This also tests if the ports 80 and 443 are accessible. Outlook requires port 443 access to iCloud in order to push and pull updates to and from the iCloud Calendar servers.
    Verify that your iCloud member name is entered into the iCloud Control Panel pane. See iCloud Setup for more information about setting up iCloud on Windows.
    Completely close and reopen the iCloud Control Panel.
    If you recently made changes in Outlook and they are not moving to your other devices or vice-versa, click the Refresh button in Outlook.
    Turn iCloud Calendar off and back on:
    Close Outlook.
    Open the Windows Control Panel:
    In Windows 8, move the pointer to the upper-right corner of the screen to show the Charms bar, click the Search charm, and then click the iCloud Control Panel on the left.
    In Windows 7 and Vista, choose Start menu > All Programs > iCloud > iCloud.
    Remove the checkmark in the checkbox next to Mail, Contacts, Calendars & Tasks, and click Apply. Wait a few seconds, then replace the checkmark, and click Apply.
    Open Outlook and test to see if the issue has been resolved.
    Ensure the iCloud Outlook Add-in is active within Outlook.
    Outlook 2010:
    Open Outlook 2010.
    Click the File menu.
    Click Options in the left panel of the Outlook window.
    Click Add-Ins in the left panel of the Outlook Options window.
    Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
    For Outlook 2007, follow these steps to verify the iCloud Outlook Add-in is active
    Open Outlook 2007.
    From the Tools menu, choose Trust Center.
    Select Add-ins from the left column.
    Look at the list of add-ins beneath "Active Application Add-Ins" and verify that the "iCloud Outlook Add-in" is listed.
    For additional information about managing Add-ins with Microsoft Outlook, see this Microsoft support document.
    Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
    iCloud: Troubleshooting iCloud Contacts
    http://support.apple.com/kb/ts3998
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Impossible to set up a TC with admin and users privileges

    Hi,
    Sorry for my english first. I'm not an english speaker...
    That's one week I'm playing with my Tc to try to set it up with admin and users privileges and and doesn't succeed to find a good way to do it....
    What I want to do: set up my Tc so that I'm an admin and can do whatever I want in the folders of each user. I want the user to have access to one folder with their name. Let's say I would like to user my TC like a usual network drive or NAS.
    What I discover: if I enable file sharing with accounts on my TC and define two users user1 and user2 with Read write privileges, user1 can see a folder user1 and put whatever he wants in it and there's a share folder for user1 and user2. BUT I cannot be admin on the TC when account filesharing is on. It means I cannot put anything in user1 folder beacuse I don't see user1 folder. It is just like if you have user accounts on TC you can just change the privileges but not defined an administrator. I'm able to see user1 folder for instance solely changing the filesharing back to secure shared disks "with time capsule password". If i do so I can see all the folders on the TC.
    But it's very annoying because it means that each time I want to put a file inside the folder of one of my user, I have to restart my TC "with time capsule password", put the file, set it up back to user account and restart again the TC.... Not really practical!
    Anyone got an idea how to use the Tc with user accounts (one admin and others users...)

    I forgot to mention that I tried also another method: giving guest access to TC to my two users but there are several problems here: first they can only read (if not they would have the same privileges as me) what means they can put any document in the TC. Second, they see all the folders on the TC and the idea is that they can only see the shared one....

  • Risk with Locking and changinf password for SAPCPIC

    Hi All,
      Please advice if there is any risk with locking and changing password for SAP standard user SAPCPIC .We are on system 4.6D .
      Somewhere I could find that if there is any RFC destination defined with this user then it may cause problem after locking .I found following entry in RFCDES table .
    a       I                                          
    M=200,U=SAPCPIC,L=E,v=3FB20DF66CA32E419606388B51,   
    But I could not find any entry in sm59 for this .What is this entry as it is not there in SM59 .
    Any other known risks pls tell me .
    Thanks,
    Chittaranjan

    Can password of SAPCPIC user be changed without any problem?
    We are on ECC6.
    Report RSUSR003 refer to note 29276 and note says that changing password will cause problem with SM51 and some other report as the password is hard-coded there. Though this note seems to be bit old.
    Edited by: Pawan Kesari on Jun 9, 2009 7:58 PM

  • Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

    Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
    For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
    Thank you for your attention.
    Annalisa 

    Don't understand what you writing here.  Screen shoots would be most helpful.
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • Users autorizations for pricing condition in sales order

    HI all,
    Can anyone tell me if there is any posibilities to control users autorization for certain pricing condition in a sales order? For example: User A can add/edit/display K007 but user B can only display K007 for a new sales order.
    Thanks in advance
    GeorgeR

    Hi
    Please check this link on WIKi
    http://wiki.sdn.sap.com/wiki/display/ERPLO/UserexitforRestrictingUserModifyingConditiontypeinSales+Order
    regards
    Prashanth

  • My Apple Earphones with Remote and Mic White For iPhone says: made ​​in vietnam. i want to know if they are OEM?

    My Apple Earphones with Remote and Mic White For iPhone says: made ​​in vietnam right in the cord. i want to know if they are OEM? here my email: [email protected], thanks.

    Accidental damage is not covered under the warranty but if possible to reset the screen without causing additional damage, the Apple Store should do this without charging for it.

  • I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book. Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can hav

    I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book.
    Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can have it offered for sale @$0.99, in your app store?
    FROM: Terry Weber, Email: [email protected]

    https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/bookSignup

  • Users Guide and Users Manual for iPod Touch 4?

    Has anyone located the PDFs for the "Users Guide" and "Users Manual" for iPod Touch 4? I can't seem to find them.
    TIA
    Judie

    In addition to the "User's Guide" there has also been a PDF "Features Guide" for each version of the iPod touch. (The one iwell provided a link for is not for the 4th generation iPod touch. (The 'at a glance' sketch shows the on/off button on the left. It's on the right on the 4th generation iPod touch.) It's possible Apple hasn't posted it yet. But I appreciate you both for trying. Thank you.

  • HT1923 This article contains the only thing that worked for me.  I also had to sign out of iCloud and uninstall it.  Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, and Users.

    This article contains the only thing that worked for me.  I also had to sign out of iCloud and uninstall it.  Then I had to delete all files and folders from all of those applications that were under Program Files, Program Files x86, Program Data and Users.  My iPhone 4 will now sync with iTunes both in its USB-connected  mini dock and over Wi-Fi.  It's unfortunate (negligent programming on the part of Apple?) that the upgrade to iTunes 11 did not remove all of those files as part of the upgrade process. 

    I am having the same issue....Same address for years - same as USPS - I tried 5 times (3 macs and 2 iPhones) and now i have 5 CHARGES for 1.00 each on my credit card. I took the credit card info off so they don't charge me anymore. How can they charge me yet still not allow me to download free updates and say I have an invalid address? I'm sure I will spend weeks or months trying to get a credit out of these incompetent idiots.

  • Segregation of  global layout and user Specific  for IW38 with Activity 23

    Hi All,
    We have issue that users are able to change the Global Layout in IW38 transaction codes, which is causing lot of confusion for other users. Please can anyone help me to do some investigation around how the access to Global Layout and User-Specific layout can be segregated.
      We would like to achieve below things:
    1)     Can we control provision access in such way users can only change layout specific to them?
    2)     They should not be able to change Global Layout
    3)     List of roles having Authorization object S_ALV_LAYO with activity 23.
    If anyone already faced this issue, can you please let me know how they resolved it
    Thanks in Advance.

    Hi David,
    > The standard S_ALV_LAYO object is, so far as I know, no use for normal day to day end users as it over-rides the restrictions?
    It's up to the business, but ours wanted the managers to set a global layout for all other users to display only... as sort of a standard report.  I agree with you in the challenge of determining who to give the long-term S_ALV_LAYO w/23 global maintenance access.  We used to have this S_ALV_LAYO in every role that contained a report access (honest design mistake), hence that is why we created a separate role contained just S_ALV_LAYO w/ 23 access  --> to managers only. 
    In our generic system role that is given to everyone, we have both S_ALV_LAYO (as blank) and F_IT_ALV (as 01, 02) so all non-manager users are able to create/save local layout & still view global layout.
    F_IT_ALV activity 70 gives the authority to overwrite other's local layout (the "Manage Layout" access), so we only gave 01  and 02.  Be careful here, as giving 03 (display) will make all other activities inactive.
    Best,
    Alice

  • Payment Program Creation Date and User (is this in any table in SAP R/3)?

    Dear Experts!
    The treasury guy asked me whether there would be a way to recover the "Payment Program" Creation Date and Created by (User) from Payment Program Executions (F110 transaction).
    I searched on the REGU* tables and I didn't find out this information.
    Does anybody know whether there is any table where this is recorded?
    NOTE: We cannot use the information from "Proposal Log" because the log is removed from the Productive System and only the last 3 (three) days are remaining.
    Thanks and Kind Regards,
    Daniel Carvalho.

    Hello "The Wirtschaftsmann",
    Thanks for the reply. However, I need the Creation Date and Creation by of the Proposal / Payment Run steps.
    Not sure if this information is available nowadays at SAP. I opened an incident with SAP, let's see what they reply to us.
    Regards,
    Daniel

  • Program with Back Ground User.

    Hi ,
    In my development we are sending data from MDM to R3 through XI.
    Here iam having the following issue:
    When sending IDOC's from XI to R3, some of the IDOC's are struck in Queue  with status 64 and, those not going to be processed at all. This is because of the unavailability of the work processes at that time. All this is done through the back ground user XIS_REMOTE.
    Iam trying to process the unprocessed IDOC's through a standard program, all the IDOC's are processed, but the data created under the Fore Ground user (i.e. my id).
    <b>I want to know is there any possibility to run or write the program using back ground user XIS_REMOTE</b> <b>so that all the unprocessed IDOC's will process and get the back ground user XIS_REMOTE.</b>
    Any inputs appriciated.
    Best Regards
    Shyam Reddy.

    ST05 you can trace SQL-statements and get expainings how these statements are being worked upon by the database. this is more a tool for investigating the performance of abaps on your 'special' database.
    since you posted your request in the security forum i will assume that you want to do an authority trace. use tx. ST01 instead of ST05. Set the filter options to the program and/or user you want to trace and flag the areas you want traced like 'authority check' 'database access' 'kernel commands' ...
    activate the trace using the matchlight-icon. run the background job to be traced. stop the trace after a sufficient time (or until the job hits the error you want to investigate). then press 'evaluation' and check the boxes for the lines to be displayed again ...
    if both my answers don't fit to your problem come back here and state a bit more precisely what your problem is, maybe we find another approach to it.

  • Logic and User Exit for Availabilty Check in Sales Orders,

    Hi All,
    I have a requirement of creating a Sales order from an Inbound IDOC. Before saving i need to do all the validations for the sales order including the availabilty check for the sales orders. If it is not  fulfilled i need to reject the sales order creation.
    I am trying to search for the logic for the availabilty check of the sales order but i am not able to find one. Please help me out with that and also i need the user exit for the availabilty check for the sales orders. Please help me out with that one too.
    Regards,
    Sharadendu

    See this function Module for message type ORDERS
    IDOC_INPUT_ORDERS all validations are there in this Function Module .
    Please reward if useful.

  • Win 7 client with machine and user auth stuck in 802.1x_REQD

    Hi everybody
    we have a WLC 5508 with 7.2.110.0 and an ACS 5.3 and do the following:
    - Win 7 client gets a GPO object with the wlan configuration for "Machine and User authentication" with PEAP
    - On ACS 5.3 I configured correctly the authentication and authorization for first machine authentication and then user authentication ("Was machine authenticated = true)
    - First when machine authentication happens, the client is configured into a quarantine VLAN, where it is only allowed to communicate with the domain controllers
    - When the user authenication happens, the client is moved into the productive client vlan with no restrictions.
    Everything works fine, except that after the user loggs in, it takes about 3 minutes until the client answers the EAP Identity Request and loggs in, see attached screenshot or the screenshot below:
    In the client status on WLC i can see that the client is stuck in the 802.1x_REQD state for these 3 minutes, until suddenly it authenticates (but then very often, about 5 times - see screenshot).
    We tried the following to find the problem spot. but we were not able to locate the problem:
    - Configure the machine and user authentication into the same vlan all the time
    - ONLY user authentication on the client
    - Played with the Win 7 settings (timers, and so on)
    - When we manually configured the WLAN profile on the Win 7 client and saved it, the Win 7 client connected to the SSID without any problems and without any delay (about 5 seconds after the save)
    Did someone ever had the same issue?
    Thanks a lot and best regards
    Dominic

    Hi Amjad
    very good point on this, thanks a lot. In this case, I did not even think about the client firmware side, thought that I should be the WLC or the client settings, but not the driver. We will give a shot on this next week, maybe this will help us to solve the problem.
    It is normal to have the clietn in 802.1x_REQD if it is not yet authenticated and that is the expected state to be at in your situation untlil the client fully authenticates.
    Absolutely correct that the client is associated and in the 802.1x_REQD state as long as the authenticator did not get the EAP identity Response, but that the client takes such a long time to answer is not normal ;-)
    - What is the supplicant that is used on the windows machines? default WLAN supplicant? or you use some commercial supplicants?
    WZC.
    - what is the result when testing with user auth only?
    The same, it takes such a long time.
    - what ist he result when testing with machine auth only?
    Machine authentication works as expected, fast and as soon as the client is booted, the client gets authenticated.
    Regards and have a nice weekend
    Dominic

Maybe you are looking for