Z1 external connector cover error and sd card connectivity problems

Hi
I have a few problems with my new phone in that I suspect it is faulty
I get this error message despite the covers being firmly closed: 'please close the external connector covers to secure waterproofness' when there is an SD card inside and when there isnt one. This happens everytime I switch the phone on
On the camera: 'memory unnavailable' when accessing camera function having set memory to SD card when it is inserted
It does seem to recognise an SD card in the phone but cannot access any data from it (even though it did before).On inserting SD card comes up with message that it is safe to remove. when going to settings->storage it has 'Mount SD card' in the SD card section
Any ideas before I take it back?
Thanks for your help

1. that is a reminder, it should give you an option to disable that message/reminder
2. it seems that your SD card its acting up, test it with other phones and/or a computer
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

When I try to sign into photoshop elements I keep getting error code 400 connection error. I am connected to wifi and have no connection problems anywhere else. How do I fix this?

FRANK M
What computer operating system is your Premiere Elements 9 running on? I will assume Windows 7, 8, or 8.1 64 bit for now.
As for the Help Menu/Update way for updating, are you doing that with antivirus and firewall(s) disabled? If not, please do so.
Do you have the 9.0.1 Update of the program installed? What version of Camera Raw do you have installed?
Premiere Elements 9 is an older program where you can still do manual installs for that one and only Update. And, Camera Raw for 9 is no longer being updated.
For the 9.0.1 Update
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4929
Camera Raw (last update possible for 9) is 6.5
Camera Raw-compatible Adobe applications
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.5 update
Please review and consider the above, and then let us know the outcome.
Thank you.
ATR

RDS External Connector installation confirmation and Event ID 4106

We purchased external connectors and I have activated a 2012 R2 RDS License server per instructions at http://support.microsoft.com/kb/887432. Those instructions are for 2003 - 2008 R2 but I did not find any RDS External Connector instructions specific to
2012 and the 2008 R2 instructions matched my options. All RDS session hosts are in per user mode and pointed to the license server via group policy. Users are able to logon to the RDS session hosts successfully. This is a new deployment.
The problem is we are seeing event id 4106 on the RDS License server with messages like "CAL reporting: Windows Server 2012 : RDS Per User CAL - Installed: 0, Issued: X" where X is an increasing number depending on number of unique users that have
logged in since we activated. I ran a Cal Usage report in the RD Licensing Manager and it shows users listed under "Successful Per User License Issuance Detail", but Installed CALs says 0 and CAL Availability says 'None'.
Are we in some sort of grace period that will expire, or are we making use of our RDS External Connectors? How can I confirm?
Regards,
Steve

Hi Steve,
Is there any update for your case?
Thanks.
Dharmesh Solanki
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Media card can not be accessed due to fatal errors and media card format failed

hi
anybody please help me. when i insert media card in blackbeery 8520 mobile i am getting the below message.
"media card can not be accessed due to fatal errors" and
when i try to format the media card on mobile i am getting the following message.
"media card format failed"
i tried to connect this media card to PC. but PC not showing any message and not even displaying the card in "my computer" folder.
i have some important files on the media card.
can some please help me to clear this problem and get my files.

mrvonzuela wrote:
Help Guys! please!
Hi mrvonzuela,
On your BlackBerry® smartphone, go into Options > Device > Storage, remove the check mark next to Media Card Support then press the menu key and choose save. Place a check mark in the Media Card Support box again, then press the menu key and choose save.
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

My lap top wont import pictures from auto play. it keeps saying there is a file error and a device connected to the computer isnt working properly. i have tried going into the internal storage to copy and paste the pictures but this wont work either.

my pictures from my i phone 4s wont import from auto play. a message keeps coming up saying there is an error and a device is not working properly. also i have tried going into the internal storage to copy and paste them but that wont work either. the page either stops responding or the picture simply dont copy. does any1 have any idea why this is happening. it has never happened before and only seems to be happening since i started using i cloud storage instead of synching my phone with the lap top.

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

I have updated all of my plugins and still cannot get any videos to play i get either an error message or internet connection problem message and my internet is working fine

videos have stopped playing on firefox, i get an error message on youtube, facebook and on netflix i get an internet connection problem, i have no problem with my internet connection, i have updated all of my plug ins...what has happened

If you get an error that says can't backup, try moving the existing backup file to a safe location and thry again. again. You can find the location of the backup file here:
iPhone and iPod touch: About backups

Altell USB Internet Connect Card connection Problem

Altell USB Internet Connect Card
My daughter is using and Alltel , UT Star Com, UM 175 wireless connect card on a iMac G5 with OS 10.4.6. She had a good internet connection for two days, then nothing since. She has had many phone tech assistance with Alltel, but still unable to reconnect.
In System preferences it shows that she is connected via “Pan Tech USB Modem” port 777. She is getting good signal strength with send and receive signal and connect time. However, when using Safari and Mail app she is unable to connect to the internet.
It seems to me that the problem lies within the set=up between the iMac and Alltel card. The card seems to be making the connection, but for some reason the computer can’t realize that this card is the way to the internet. Safari brings up the usual “you are not connected to the Internet”, then the diagnostics application that guides you through troubleshooting with the usual questions, none of which include a wireless USB connection.
Is there some other thing she needs to do for her iMac to recognize the Altell card?

I just gave up on this problem and went in another direction

9780 and Playbook bluetooth connection problem

I have never experienced bluetooth connecting problems between my 9780 and Playbook 64 previously ... but for last few days I cannot connect them. I have deleted both devices and re-paired successfully. I have turned both fully off (removed 9780 battery) and still no connection.
I have tested both devices by successfully connecting each of them to other bluetooth devices. They just will not connect to each other for some reason.
The only change was the recent Playbook Software update.
I use the Bridge and Tethering all the time and so need Bluetooth to be working ... thanks for any assistance.
Solved!
Go to Solution.

maybe you can uninstall then reinstall the Bridge app on your 9780.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

E65 and Pc Suite Connection Problem

Hi Everyone,
I seem to have a problem with my E65. My goal is to synchronize my calendar in Lotus Notes, with my E65, every 30 minutes when I am around the laptop (via bluetooth).
However, although I am able to connect to my phone via bluetooth from PC Suite (I can see the files in my E65 form my laptop, connect via gprs, etc.), the synchronization doesnt work. It used to work a while back, but then, I remember having similar problems.
In PC suite v.6.85.14.1, when I click on, "Click here to connect a phone" and choose bluetooth connection in the popup box, my phone appears in the list, with a handshake and a lock icon next to it (paired). I select my phone in the list, hit next, and it says "You now have the following connections available: Arda E65". Great! But when I go back to the PC Suite, it still says "Click here to connect a phone". Damn!
Also, there is a PC Sync icon in my taskbar. Click on it, and the Nokia PC Sync comes up. The synchronize now option is faded out, and only View last report and Select Phone is available. When I click on Select Phone, nothing comes up..
Can someone please help me with this problem as I really need that feature. That was one of my reasons for buying the Nokia E65...
Thanks in advance,
Arda..

Hi,
Ever find a fix ? My problem is below (seems very similar). This group has not helped me yet.
/t5/Connectivity/Nokia-6350-bluetooth-connection-to-PC-may-or-may-not-resume/m-p/724267/highlight/tr...
Neel

Folder with Exclaimation Point Error AND Ipod cannot connect to itunes

I left my Ipod in my truck (cold out) for about a week, using it about every other day (always seemed to work fine)... then all of the sudden I went to turn it on and after the Apple icon, I get an error in the form of a picture of a folder with an exclaimation point. When I try to plug my ipod into my computer (to perhaps restore the settings or something) my computer recognizes the USB device, the ipod screen says "do not disconnect" and then shortly after, without it connecting to itunes, it disconnects itself and goes back to the apple screen. Any Ideas? The Apple instructions for dealing with this havn't worked.
My Ipod is I believe a "second generation"(?). It is a 20-gig ipod with a click wheel, about 2 years old now.
dell inspiron 8000 Windows XP

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

Problem establishing Business Connector 4.8 and R/3 connection

Hello,
I'm currently running a few SAP Business Connectors 4.7 servers for my company, all connected to SAP R/3 4.7 backend, and everything works fine.
I tried to setup the new BC 4.8, on a fresh Windows 2003 server, the install went fine, but when I try to make a new R/3 connection, with a working and existing RFC user (previously used by the former BC 4.7), I have the following error message :
Error : class com.sap.conn.jco.JCoRuntimeException
Message : Name or password is incorrect. Please re-enter on 192.168.0.4 sysnr 00
Service : sap.admin.server:getInfo
I don't understand because if I unplug the 4.8 server and plug back the 4.7 one with exactly SAME user/password and same R/3 connection properties, it works fine...
I precise I re-typed manually the login/passwords in both BCs to ensure it's not due to a typo error.
I have read that JCO has changed between 4.7 and 4.8 releases. Could it have an impact ? Also do I still need to install a librfc32.dll in my windows/system32 directory ?
Any clues ?
Thanks in advance for your help
P.
Edited by: Patrick TOURNEUR on Jul 21, 2008 6:40 PM

Hello,
just for your info, the JCo implementation has changed about this login function. BC 4.8 is using JCo 3, 4.7 used JCo 2.
I never understood the whole problem completely, but as you found out by yourself, you are safe if you enter the user/pwd in SAP only uppercase, and also in BC
SAP changed this user/login up/lowcase stuff at some time, which has caused many trouble in projects.
CSY

Windows 7 64-bit: Switchable graphics and Ricoh card reader problem

Hi guys,
Two problems with my laptop. I'm using a T400, previously installed with Windows Vista Business 32-bit.
Switchable graphics worked well until I formatted and installed Windows 7 Pro 64-bit (I got the RTM through MSDNAA). Now, Windows can only detect either the discrete graphics or integrated graphics at one time. When the BIOS was set to switchable graphics and enabling the detection of switchable graphics on Windows, it could only detect the Intel integrated graphics. When I try to switch to High Performance graphics through the Lenovo power manager, the screen flashes once, and the ATi graphics card appears on the device manager with the code 10 error (cannot start device). Also, compared to this image, my power manager window that opens with left-click does not have battery stretch and switchable graphics options. I have to right-click to switch my graphics.
After some tinkering, I managed to activate the graphics card through the BIOS by switching it to discrete graphics only and disabling switchable graphics detection by Windows. Now the device manager shows the ATi card only, the Intel integrated graphics is gone. I understand that it should show both display adapters in the device driver when the ATi card is active: http://www-307.ibm.com/pc/support/site.wss/MIGR-70495.html#g4
The second problem is with the Ricoh card reader. I managed to install the drivers properly, but the device shows up with a code 12 error (This device cannot find enough free resources that it can use) in the device manager. That error appears on 6 items in the device manager:
Ricoh Memory Stick controller
Ricoh SD/MMC Host controller
Ricoh xD-Picture card controller
Ricoh 1394 OHCI Compliant host controller
Ricoh R/RL/5C476(II) or Compatible CardBus controller
SDA Standard Compliant SD host controller
Additionally, 6 error messages appear during every boot up, which I think is related to these 6 devices:
ERROR
Resource Conflict - PCI in slot 07
Bus:15, Device:00, Function: 00 (it ranges from function 00 to 05)
AND disabling the device through device manager results in a BSOD.
I've seen some people post about the Ricoh problem, but didn't have any resolution (at least for those who had the boot up error message too). The switchable graphics problem seems quite common too but in my case it seems like it is working fine EXCEPT for the fact that only one graphics adapter can appear on the device manager at one time and I can't do switching at all. Anyone know if I can somehow solve this? Sorry for the wall of text and two-problems-in-one. I put them together because I don't know if one problem is affecting the other as both problems appeared at around the same time.

As far as the graphics goes it's well accpeted the only way at present to switch is though the bios manually. There is currently no drivers that enable users to switch from within Win7. Know it's a pain but will just have to wait.

Outlook 2013 Mail Setup Add Account crashes with Rundll32 error and will not connect to Exchange in Windows 8.1

I got a new Acer laptop with Windows 8.1 over 3 weeks ago, and installed Office Professional Plus 2013. I have an Office365 E1 subscription, but this Office 2013 is not associated with the subscription.
When I go to setup any email account using the automatic mode (primary will be Exchange Online with my 365 account, but I've tested POP email accounts with the same result), the Mail Setup crashes once the email address and password is entered and Next is
pressed. This error message is displayed:
"Windows host process (Rundll32) has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
The step displayed as in process when the crash occurs is the "Searching for [email address] settings". The first step "Establishing network connection" is checked complete.
I've run an Office Repair, and there's no change. I've run a clean boot, and even uninstalled/reinstalled with the same error still appearing.
If I use the manual setup mode and input the server outlook.office365.com, both the Check Name function and the Next button result in the error message:
"The action cannot be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action." The folks in the Office365 support community have told me that Office365 ExchangeOnline
servers have to be configured with the auto-setup and cannot be setup manually.
I've done both a system refresh and a system reset, and I'm still getting the Rundll32 error. I tried to run a reset from a disk, but the laptop does not want to run it from the external DVD drive (giving error messages), so that doesn't appear
to be an option.
I've searched extensively, and there doesn't seem to be any existing threads where anything like this problem is discussed.
Can you offer any ideas or solutions?
After THREE WEEKS of troubleshooting this, and some significant delays in getting help from support, I'm really close to returning this laptop.
I need an answer on this ASAP to see if you've got an insights before I return the laptop for a new one.
Thanks,
Jason

IMPORTANT: I found the solution. Another user figured it out and posted the answer on another thread.
Please spread this around to all other Outlook support techs so they know to point people in the direction of the quick (though very obscure) fix to this problem.
See this thread for how to disable graphics acceleration in Office, which iswhat causes the rundll23 error.
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook/rundll32-outlook-mail-windows-host-process-error/bf90e1fd-3985-4b15-bc50-f9b3e937a859?tm=1424345216297
Thanks,
Jason

HT5113 "Invalid code error" and "can't connect to the iTunes Store." Any suggestions?

I keep getting an "invalid code error" when trying to preview a course with the enroll code. When I click on the link to the course, I get an error that says "can't connect to the iTunes Store." Any suggestions?
I tried previewing a test course I made about a year ago. I was able to request access to the course, went into Course Manager and approved it, but hours later it still says awaiting approval on my iPad.
Any ideas as to what could be going on, aside from a cruel April Fool's joke?
Thanks.
David

How about trying to sign out of your account on the iPad, restart the iPad, sign back into the account and then try again?
Settings>Store>Apple ID - tap on your ID and sign out - restart - go back - sign in.
Other than going through the support article - if you haven't already done so - the only other thing I can think of is to reset/reboot the iPad. That can clear the memory and it does help solve a lot of "hinky" issues.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Replication issues: Operations Master shows ERROR and attempting to connect to server shares gets "the target account name is incorrect"

I think this should be easily resolved, but I need some guidance.
I have a client with 2 Server 2003 R2 x64 DCs: BORIS & NATASHA. Last year I upgraded both of them from x86 to x64 one at a time, allowing replication to occur between the upgrades. BORIS is the FSMO roles holder as it is currently the production server,
while NATASHA is a backup DC. One thing that puzzles me though is that if I look at the NS record in DNS on the SOA tab, it says NATASHA is the Primary server.
While doing some routine maintenance I noticed an error in the File Replication Service events about a 'Tombstone' situation (Event ID 2042). I looked at article cc757610 in the Technet Library and opted for remedy #3 as I did not want to demote NATASHA
and I got confused looking at the help about using "repadmin /removelingeringobjects". I have no idea how to determine which DC has the good copy of the directory.
Now, in running "repadmin /showrepl" I get
"DC=CPA,DC=local
    Default-First-Site-Name\BORIS via RPC
        DC object GUID: 0267a090-1890-40e2-9a15-ea928cabd425
        Last attempt @ 2012-12-27 08:28:55 failed, result -2146893022 (0x80090322):
            The target principal name is incorrect.
        1179 consecutive failure(s).        Last success @ 2012-12-21 23:30:15." <-- THIS IS WEIRD SINCE THIS IS THE DATE THAT I DISCOVERED THE TOMBSTONE EVENT AND MADE THE REGISTRY CHANGE
(I THINK).
When I try to look at the FSMO roles on NATASHA, it shows ERROR for RID, PDC & Infrastructure and says "The current Operations Master is offline. The role cannot be transferred." The other issue I'm having is that client PCs are intermittently having
trouble reconnecting to necessary server shares.
TIA
Wayne S. CompTIA A+ CompTIA Network+ Microsoft MCP

Hello Sandesh,
I spent a lot of time trying to understand using NETDOM to reset machine account passwords (don't understand it yet), but I see that you're saying that won't work anyway.
I'm not really sure how to tell which DC is the broken one, but I'm assuming it's BORIS since that's the one users are unable to connect to. Since it is the FSMO role holder and GC I want to make sure I understand the steps correctly:
1.Use dcpromo to forcefully demote BORIS
2.Do metadata cleanup on NATASHA (using ntdsutil?)
3.Promote BORIS again to DC
Should I leave NATASHA as the FSMO role holder and GC? BORIS is the better (more resources/faster processor) machine and it's the file server. Or should the better machine be the FSMO role holder and GC as well as the file server. NATASHA is meant to be
a backup in case BORIS dies.
Thanks,
Wayne S. CompTIA A+ CompTIA Network+ Microsoft MCP www.InfoTek831.com
Hi,
The step you are performing is correct but you also need to seize the FSMO role on other DC if BORIS is FSMO role holder and configure authorative time server role.You can later move the famo role to BORIS server the choice is your however if you are
moveing the role then you need configure authorative time server on BORIS server.
Configuring the time service on the PDC Emulator FSMO role holder
http://msmvps.com/blogs/acefekay/archive/2009/09/18/configuring-the-windows-time-service-for-windows-server.aspx
Domain Replication has exceeded the tombstone lifetime
http://pmeijden.wordpress.com/2011/01/12/domain-replication-has-exceeded-the-tombstone-lifetime/
Forcefull removal of DC:
http://support.microsoft.com/kb/332199
How to transfer or seize FSMO roles
http://sandeshdubey.wordpress.com/2011/10/07/how-to-transfer-or-seize-fsmo-roles/
Metadata Cleanup of a Domain controller
http://sandeshdubey.wordpress.com/2011/10/12/metadata-cleanup-of-a-domain-controller/
Once both server is online check the health of DC by running dcdiag /q and repadmin /replsum.Ensure that DNS/GC role is configured on both DC's
Hope this helps
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Z1 external connector cover error and sd card connectivity problems

Similar Messages

Maybe you are looking for