Z40-70 compatibility issue with your power management system

I noticed today that the Action Center says "Compatibility issue with your power management system." The description underneath is: Your power management system isn't working peoperly because a compatible driver is not available for this version of Windows. When I click on View message details it just says "Your computer was unable to download the solution at this time. Check to make sure your computer is connected to the Internet, and then try to download the solution again later." All power related functionalities however seem to be working. Battery is charging; battery percentage is showing; I can adjust screen brightness. I am not sure when exactly this problem started but it defenitely was not there before. Tried downloading and fixing the Power Management Software and updating BIOS. Still have the same message. System: Windows 8.1 64-bit 

What model do you have? Can you post your MTM or model name?
Sometimes these messages are a false alarm.

Similar Messages

  • Yoga 2 pro / win8.1 - "Compatibility issue with your power management system"

     Hi,
    After downgrading form win10 back to 8.1 due to endless driver malfunction and a significant decrease in overall performance, I got this message in windows action center: “Compatibility issue with your power management system”. When I click on it it says: This solution could not be downloaded
    Most likely causes:
    • Your computer was unable to download the solution at this time. Check to make sure your computer is connected to the Internet, and then try to download the solution again later. As you can see, my internet connection is fine. Does anyone know how to solve this? Thanks,
    Daniel

    Check if installing this helps you:
    http://download.lenovo.com/consumer/mobiles/em8.0.2.3.exe
    If you already did this, check if you can do this BIOS update as well:
    http://download.lenovo.com/consumer/mobiles/5ecn96ww.exe
    Let me know if it works.
    Jonas
    Microsoft MVP: Windows Consumer Expert
    Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
    Twitter: @jonashendrickx

  • Compatibility issue between your power management system and Windows 8.1

    I have purchased a new Lenovo Ideapad S410 and have this problem.
           Compatibility issue between your power management system and Windows
           It also gives a message "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. (100% complete)
           If you'd like to know more, you can search online later for this error:
    VIDEO DXGKRNL FATAL ERROR
    Please help! My laptop is only 5 days old.

    What model do you have? Can you post your MTM or model name?
    Sometimes these messages are a false alarm.

  • Compatibility issue between your power management system and Windows,

    Compatibility issue between your power management system and Windows, and my system is Lenovo ACPI-Compliant Virtual Power Controller.

    What model do you have? Can you post your MTM or model name?
    Sometimes these messages are a false alarm.

  • Software Issue with New Power Management Update

    In this post I'll be talking about the Power Management update for Windows 8.1 Pro, version 1.67.09.00, released on 10/15/2014.
    I installed this via System Update yesterday and, when shutting down my computer before going to classes that day, I noticed something odd. Even after Windows shut down, the display went black, and the hard disk indicator light (yes, please bring those indicator lights back to the Thinkpad line!) stopped flashing, the power indicator was still on. From there I deduced the system was still on in a "limbo" state. In fact, the keyboard light was still functional, and so was the mute button! I was right.
    Later that day, I let my computer sit through this "limbo" state, and a horrible apparition, the Blue Screen of Death, appeared! It stated that there was a "Power Driver State Failure" and immediately proceeded to shut down my computer. I rebooted, used System Restore to undo the installation, and the issue was fixed.
    In short, don't install this update if you have Windows 8.1 Pro and a Thinkpad X230 Tablet. It didn't work well for me. Lenovo, please double and triple check your update before an eager geek like myself proceeds to install it.
    Moderator comment: Post edited to conform with the Community Rules. Keep it clean.

    http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/X230T-not-shuttung-down-after-BIOS-syst...
    Regards,
    Terence Chan
    X230 Tablet, X220, W530, ThinkPad Tablet 2, X1 Carbon Touch

  • Issue with KDE power management plugin and battery monitor widget

    Hi everyone, I'm having troubles with the battery monitor widget on KDE: since I have installed the DM I get an error message during the startup saying that "no valid power management backend plugin is available", so I can't get my battery monitor working. Does anyone know how could I do to have this problem solved?

    Hi everyone, I'm having troubles with the battery monitor widget on KDE: since I have installed the DM I get an error message during the startup saying that "no valid power management backend plugin is available", so I can't get my battery monitor working. Does anyone know how could I do to have this problem solved?

  • Registry issue with Lenovo Power Manager with X61

    I have the following problem. 
    Hi guys,
    Lenovo power manager v1,6 quit working properly lately so I googled for a solution which involved removing power schemes which had reproduced in the registry to cause an overload to the application.
    Anyway because this wasnt really working (I ended up with having powerschemes but wasnt allowed to change them) I in my brightest moments decieded to delete the messed up part of my registry [HKEY_CURREN_USER --> Control panel --> PoweCfg] because it was preventing my reinstalations of said program from functioning properly since they resorted to the previosly present registryentrys.
    Well it appears that when installing the powermanager it does not write these new registry entrys and Im stuck now without a way to get them back. I wonder at what point that registry entry is written in the first place, does anyone feel like exporting said part of their healthy registry...please...?

    ..this one is from an x200 with Server2003...seems like you're familiar enough with registry exports and wrapping and shoiuld be able to convert this into a *.reg form:
    Windows Registry Editor Version 5.00
    [HKEY_USERS\.DEFAULT\Control Panel\PowerCfg]
    "CurrentPowerPolicy"="7"
    [HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\GlobalPowerPolicy]
    "Policies"=hex:01,00,00,00,00,00,00,00,03,00,00,00​,08,00,00,00,00,00,00,00,03,\
      00,00,00,08,00,00,00,02,00,00,00,03,00,00,00,00,00​,00,00,02,00,00,00,03,00,\
      00,00,00,00,00,00,00,00,00,00,01,00,00,00,00,00,00​,80,00,00,00,00,01,00,00,\
      00,00,00,00,80,01,00,00,00,05,00,00,00,02,00,00,00​,04,00,00,c0,01,00,00,00,\
      04,00,00,00,01,00,00,00,0a,00,00,00,00,00,00,00,03​,00,00,00,01,00,01,00,01,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00​,00,00,00,00,02,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00​,00,00,00,03,00,00,00,00,\
      00,17,00,00,00
    [HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies]
    [HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\0]
    "Name"="Home/Office Desk"
    "Description"="This scheme is suited to most home or desktop computers that are left plugged in all the time."
    "Policies"=hex:01,00,00,00,02,00,00,00,01,00,00,00​,00,00,00,00,02,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,2c,01,00,00,32,32​,00,03,04,00,00,00,04,00,\
      00,00,00,00,00,00,00,00,00,00,b0,04,00,00,2c,01,00​,00,00,00,00,00,58,02,00,\
      00,01,01,64,50,64,64,00,00
    [HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\1]
    "Name"="Portable/Laptop"
    "Description"="This scheme is designed for extended battery life for portable computers on the road."
    "Policies"=hex:01,00,00,00,02,00,00,00,01,00,00,00​,00,00,00,00,02,00,00,00,01,\
      00,00,00,00,00,00,00,b0,04,00,00,84,03,00,00,32,32​,03,03,04,00,00,00,04,00,\
      00,00,01,00,00,00,14,f2,06,00,84,03,00,00,78,00,00​,00,08,07,00,00,2c,01,00,\
      00,01,01,64,64,64,64,a0,71
    [HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\2]
    "Name"="Presentation"
    "Description"="This scheme keeps the monitor on for doing presentations."
    "Policies"=hex:01,00,00,00,02,00,00,00,01,00,00,00​,00,00,00,00,02,00,00,00,01,\
      00,00,00,00,00,00,00,00,00,00,00,84,03,00,00,32,32​,03,02,04,00,00,00,04,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00​,00,00,00,00,00,2c,01,00,\
      00,01,01,50,50,64,64,00,00
    [HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\3]
    "Name"="Always On"
    "Description"="This scheme keeps the computer running so that it can be accessed from the network.  Use this scheme if you do not have network wakeup hardware."
    "Policies"=hex:01,00,00,00,02,00,00,00,01,00,00,00​,00,00,00,00,02,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,32,32​,00,00,04,00,00,00,04,00,\
      00,00,00,00,00,00,00,00,00,00,b0,04,00,00,84,03,00​,00,00,00,00,00,08,07,00,\
      00,00,01,64,64,64,64,00,00
    [HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\4]
    "Name"="Minimal Power Management"
    "Description"="This scheme keeps the computer on and optimizes it for high performance."
    "Policies"=hex:01,00,00,00,02,00,00,00,01,00,00,00​,00,00,00,00,02,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,2c,01,00,00,32,32​,03,03,04,00,00,00,04,00,\
      00,00,00,00,00,00,00,00,00,00,84,03,00,00,2c,01,00​,00,00,00,00,00,84,03,00,\
      00,00,01,64,64,64,64,00,00
    [HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\5]
    "Name"="Max Battery"
    "Description"="This scheme is extremely aggressive for saving power."
    "Policies"=hex:01,00,00,00,02,00,00,00,01,00,00,00​,00,00,00,00,02,00,00,00,05,\
      00,00,00,00,00,00,00,b0,04,00,00,78,00,00,00,32,32​,03,02,04,00,00,00,04,00,\
      00,00,00,00,00,00,00,00,00,00,84,03,00,00,3c,00,00​,00,00,00,00,00,b4,00,00,\
      00,01,01,64,32,64,64,00,00
    [HKEY_USERS\.DEFAULT\Control Panel\PowerCfg\PowerPolicies\7]
    "Policies"=hex:01,00,00,00,00,00,00,00,01,00,00,00​,00,00,00,00,00,00,00,00,00,\
      00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,32,32​,00,00,04,00,00,00,04,00,\
      00,00,00,00,3d,77,2e,f2,07,00,00,00,00,00,00,00,00​,00,00,00,00,00,00,00,00,\
      00,01,01,64,50,64,64,91,7c
    Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

  • Satellite A660 Win7 action centre - Power management system is missing driver

    I replaced the battery on my A660-15J Toshiba laptop a few months back with the high capacity battery and now the win 7 action center keeps popping up with the message that I need to download and install the missing power management system driver.
    The power supply was not replaced at all, nothing has changed, other than the battery.
    The charge light on the laptop functions as it did before the battery change.
    It comes on and is red, and after a couple of hours it goes white and the battery level shows it is at 100%
    The problem is that windows 7 action center says that it is missing an ACER driver??? -> WTF???
    The link that it gives to download it from DOES NOT WORK
    It seems strange to me that the link that windows provides its to an acer website, but since manufacturers use parts from others manufacturers it does not surprise me at all.
    I just want clarification and confirmation of what I need to do here, and why the toshiba service center is not showing this update???
    I read that BIOS update can resolve this issue, however there is NO bios update for my laptop.
    I have also contacted MICRO$OFT but I'm still awaiting a reply from them.
    I have also read other posts on various toshiba forums that relate to this same problem but they usually say that model is not supported by toshiba in that country....
    I clicked the link to this forum directly from the Toshiba Australia website, so please don't tell me that my model is not supported on this Toshiba Europe forum!
    The exact message:
    Download and install the driver for your power management system
    Your power management system is missing a driver.
    Follow these steps to solve this problem:
    Tap or click to download the driver from the A+c+e+r Corporation website
    Download and extract the driver files
    Tap or click Save or Save as, and then save the file to your desktop. If you cant choose where to save the file, youll need to find it and copy it to your desktop. When you download files, most web browsers save them to the Downloads folder on your computer.

    > I replaced the battery on my A660-15J Toshiba laptop a few months back with the high capacity battery and now the win 7 action center keeps popping up with the message that I need to download and install the missing power management system driver.
    Possibly this is the problem. Is the new battery fully compatible?
    Satellite A660/15J is an Australian notebook model.
    Here I found some accessories for this model:
    http://www.mytoshiba.com.au/products/computers/satellite/a660/psaw3a-15j06t/accessories
    The compatible battery are:
    Toshiba Battery Pack (12 Cell / 9000mAh / Li-Ion / 10.8V) PA3819U-1BRS
    Toshiba Battery Pack (6 Cell / 5600mAh / Li-Ion / 10.8V) PA3818U-1BRS

  • " Compatibility issues with power management. on g50 45 . please help.

    LENOVO G50-45my BIOS is up to date and I updated my power management system just yesterday. The battery also drains very quickly , just 90 minutes. Please help.I am getting this problem since a week now. and my battery drains so quickly even when on power saver mode. when i click on the message , I get no solution although my laptop is connected to internet it says , its not connected.And when i click on it , it says ,  Now if I click " View all problem this applies to , it says a different thing, there are two things saying the sam thing, driver software installation. wheni click one of them it says, " Pnp driver not found" PLEASE HELP. Thank you. I want my power manageent system back. 

    You should check your startup drive as a starting point, if programs are crashing regularly. That's obviously not "normal." Run +Repair Disk Permissions+ in Disk Utility while started up normally. Then, start up from another disc and run Disk Utility to use the +Repair Disk+ on the startup drive, to look for disk directory issues (you can startup from the Mac OS X installation disc to run Disk Utility).
    When this happens, Force Quit doesn't do anything. Any other options?
    You can start the Activity Monitor program and quit processes that look relevant to the app. Sometimes, force quit does not work to quit an app because an underlying process keeps running. Sometimes, the Mac is not able to restart or shutdown normally because an app refuses to quit, due to this problem. It is often difficult to know if you should kill a process, so after doing it to make an app quit, it would be a good idea to restart.

  • HT5306 I do not want to give remote access to anyone but myself as privacy is my friend.  Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only?  What if I do not update? compatibility issues with wh

    Hello:
    Thank you for the update for remote access for desktops.
    Personally, I do not want to give remote access to anyone but myself as privacy is my friend.  Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only?  What if I do not update? I do use this lap top in other countries.  compatibility issues with what?

    Apple Remote Desktop is off be default. It has to be enabled for some one to be able to remotely connect to the computer. And then, you still have to have a user name and password on the computer to remotely connect with.
    If you want to see if remote access has is enabled for Apple Remote Desktop; you can find the setting in, Apple Menu, System Prefrences, Sharing. If it's enabled, Remote Management or Screen Sharing will be checked.
    Beucase Apple Remote Desktop Agent is part of the Mac Operating System; even if your not using it, Apple Software Updates will from time to time offer updates for ARD Agent. Software Updates can some times be stacked ontop of each other; so chosing not to install an update, can mean other updates you may want may not be offered. At least until you install the updates those updates require. Also software updates can improve the security of your computer.

  • Are there any compatibility issues with Sonos and Airport extreme??

    are there any compatibility issues with Sonos and Airport extreme??

    Sonos uses its own priopietory wireless protocol SonosNet to distribute audio data among all its products, thus it should not affect other network devices which use standard WiFi 802.11a/b/g/n protocol at all though they may share the same radio channel for wirless signaling.
    On my dual-band (5 GHz / 2.4 GHz) Airport Extreme staion, I select the option "802.11n Only (5GHz) - 802.11n (2.4GHz)" and turn on "Use wide channels" in Wireless configuration in order to use only 802.11n protocol and more radio channels to achieve maximum wireless bandwidth of 400 Mbps. This bandwidth is necessary for quick Time Machine backup to NAS connected to the Airport Extreme station through Ethernet cable. So my iMac and MacBook Pro always connected to the Airport Extreme through 5 GHz radio channel with 802.11n protocol whereas my iPhone 4S always connected through 2.4 GHz radio channel with the same protocol.
    In my living room Sonos ZP-90 (same as new CONNECT model) zone player is connected to Airport Extreme directly through Ethernet cable (recommended by Sonos) and Sonos S5 (same as new PLAY:5 model) zone player in bedroom is connected wirelessly through SonosNet protocol to the ZP-90 zone player in living room.
    These devices are in operation simutaneouly most of the time. Music is playing through the Sonos ZP90/S5 zone players througout the day, I am streaming viedo through Internet (fibre broadband 25 Mbps) on my MacBook Pro in bedroom or iMac in living room or reading news on my iPhone. So far so good and have no encounter any interference problem for about three years. Further more bandwidth for 802.11n protocol does not seem to be affected at all.
    In fact with a low power Fujitsu USB drive (2.5" / 500 GB, designed for notebook) plug into USB port of Airport Extreme, it can be used as NAS drive for Sonos music distribution system without any problem. Just transfer all files from Music folder in my home directory on iMac into this NAS drive and set it up as music source in "Manage > Music Library Settings" in Sonos Controller for Mac application will do. Though the same drive can be served as Time Machine's backup disk as well, an independent full-fledged NAS drive for Sonos and Time Machine backup is better long-term solution for reliability and performance. With the NAS configured as sole music source, you do not need to keep any computer powered on all the time in order to play music through the Sonos system.

  • Compatibility issues with mac OS - Lightroom 4 works where CS5 won't

    Hope someone can shed some light on this issue...
    I tried installing Lightroom 4 on Mac OS 10.6.1 (which is currently running CS5 without issues) but the specs call for OS 10.6.8 or later (10.7). When I updated my OS to 10.6.8, none of my CS5 apps work! They encounter launch errors - InDesign, Illustrator, Dreamweaver... only Photoshop seems to work. So, I reverted back to OS 10.6.1 and all the programs function. Is Adobe working on a solution to fix this issue? I see with the forums that several other users have noted the same issue with CS5 not working in the OS 10.6.8 environment. I don't want to upgrade my OS just to have Lightroom function, but none the CS apps. I was thinking of partitioning my HD to load both OS, but that shouldn't be the workaround. I am very disappointed that I've purchased Lightroom 4 and now am unable to use it due to compatibility issues with the OS with the rest of CS5.0.

    Pixelzboy are you receiving any specific errors when launching your applications under 10.6.8?  CS5 should work just fine with 10.6.8 as well as 10.7.3.  You may also want to post to the product specific forums with your launch errors as the users in those forums will be more familiar with troubleshooting steps specific to those products.

  • Are there compatibility issues with 1st gen I pad and new wireless printers?

    Need to replace HP printer being used with 1st Gen I Pad.  Are there any compatibility issues with new wireless printers?

    Hello jxroads,
    Welcome to the Apple Support Communities!
    I understand that you are going to replace your printer and would like more information on what printers are supported for AirPrint. The attached article has a list of AirPrint printers currently supported for iOS devices. 
    About AirPrint - Apple Support
    Cheers,
    Joe

  • Microsoft ERP MA (3.3.1077.2) for SAP and compatibility issues with SAP 6.0

    Hi all,
    I want to configure the ERP MA (3.3.1077.2) for SAP on ILM 2007 in order to synchronize passwords between AD and SAP. I have several instances of SAP. The SAP versions are as follow:
    SAP ECC 6.0 7.00 - 64bit
    SAP ECC 6.4 7.01 - 64bit
    SAP BI 7.1 7.01 - 64bi
    I was wondering whether there are compatibility issues with any of the above mentioned versions.
    Your feedback is appreciated.
    Regards,

    Did you install a Java machine JRE ? If no, when you do the drag and drop you have the popup but it does work
    [http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html |http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html]

  • We have detected an issue with your team

    When I try to Manage My Team I get the following error message:
    We have detected an issue with your team Axis Technology, LLC. Please contact customer support to resolve this issue.
    I tried contacting Support via chat and I got no response

    Yes, you are correct, the support can not be contacted with this link, I have send a private message, please respond to it.

Maybe you are looking for