IPhone 4 Warranty, Third Party Charger Errors

Hi All,
I am experiencing problems; speakers not working for iTunes, constant "This Acessory Not Optimized" message popping up, and charging difficulties, all likely due to a third party charger.  I am hesitant to send my phone in under the warranty, frankly because I don't have faith in my local Verizon representatives.  Has anyone sent their phone in under the 1-year warranty in similar circumstances?  What were the results?  Did they charge you for damage, or is this sort of error beyond that range?
Any and all advice would be valuable.
Thanks,
-C

vereyezuhn wrote:
EmBee31404 wrote:
Trust me if you have not had it the 14 days, The iPhone your going to want to return asap, I had mine on Friday and retuned it on Monday, It is cute mind you, However the keys as you aleready most likely know are so small your going to constantly make corrections as it will type in the wrong letter, I hated mine so bad I almost ran to the truck to return mine, and the battery life they say lasts a month, pfffft, it is most likely will last you a day if that, Mine in sleep mode went from 3/4 over night to null,
The iPhone is actually one of the best smartphones in terms of touch sensitivity and correctness when typing. Just because YOU can't type on it or have large fingers, doesn't mean other people will have the same problem. And I don't know WHERE in the world you heard that the battery lasted a whole MONTH. That's insane! There's not a phone in the world whose battery lasts a month. A day is actually a long time for a battery to last with a smartphone.
I am the one that posted about the month long battery, I had to redo my so called address to come back in and reply, notice but they deleted one of my emails I mentioned. it might have been a defect in the phone, However I was told those pens do not work by one rep as asked, as I would have used it longer, and for the battery? another rep told me that she only charges hers once a month and it had a  long battery life, I did think to self, hmmmm a whole month she is filling me full of organic material Like I tried to post once, It could be very well the phone and I am not ruling it out as far as trying it maybe some other time, It just was not what the rep sales pitch was, I do think they could improve on the headset or the wired piece as that gave me a ton of problems using it, but again it could have been the bad apple in the bunch, {No pun intended} but I returned mine fast, Just was really more then I needed and again the sales pitch was very different then what I received, and I can honestly say each person you call pretty much has a different approach, like today I got some results on a re-order by asking to speak to the supervisior, But wish all you that have it good luck, Just was not the kind of phone I liked, oh yes, another rep told me it had to feel the heat of your finger to click on the key pads, that is why she said the pens did not work, however noticed someone in the car a friend using one of those pens on her samsung galaxy she got from T-Mobile, and no, no way on this earth am I switching carriers

Similar Messages

  • When I use a third party charger, my iPhone beeps

    I bought a third party charger for my iPhone 5.  Within 5 minutes of attaching, the charging icon oscillates between its regular size and a larger size.  When the  icon is in its enlarged state it beeps.  Any ideas?

    Don't use that charger. That charger is evidently causing a problem.

  • Garageband detects a third party midi error?

    so every time i open my garageband i get this pop up that says that garageband detected a third party midi error. it wasn't always like that but now i can't get my guitar to be connected into my computer. i have a m-audio firewire solo that i update and it gets a reading from the guitar but garageband wont recognize that its there.
    How do i fix this?
    macmini G4   Mac OS X (10.4.8)  

    having this same problem on many of our school machines that have digidesign stuff also (protools 7.1) i tried all the suggestions from another thread about this:
    remove garageband .plist and .cs files,
    remove icontrol.bundle from the app's contents
    remove digi's midi drivers (which renders the mbox2 useless for midi input of course)
    reset pram, repaired permissions, etc. etc.
    still no luck
    the midi server is unavailable.
    ??

  • How can i view third party charges to my account?

    I received  a text message that a third party charge was made to my account and I could view it online....how do I find it?

    Have you registered with my Verizon so you can access your account online?
    its easy and gives you access to everything on your account, including billing details.
    If you select my Verizon at the top of the screen, it will prompt you for the information needed to do so.

  • TS2446 bought iphone from third party it is disable for security reasons help

    bought iphone from third party disabled for security reasons help

    If your Apple ID is disabled for security reasons contact Apple for assistance by going to https://expresslane.apple.com, then click More Produces & Services>Apple ID>iTunes Store, App Store or Mac App Store>Disabled Apple ID.

  • Charging from a third party charger

    I am using a third party charger, but my itouch stops charging after about 3 minutes no matter how much juice is left. I have recreated this numerous times. Can I NOT use non-apple chargers??

    yeah i know you mean the ipod touch - some people on here do get a bit 'touchy' (all be it in a jokey manner), if you'll pardon the pun when people refer to them as the itouch.
    you didn't say you were using the USB connecter which came with it, you said you were using a third party one. if it isn't charging properly with the provided USB cable then that is a different problem. could be a battery problem, could be a cable problem. you would probably need to go to an apple store to get the to check it out (unless you have another ipod USB cable lying around the house)
    when they refer to faster USB, they mean USB 2.0 ports, which are found in newer computers, i'm not entirely sure, but i believe they are faster and allow more power to the peripheral device than the older USB ports did.
    Message was edited by: Anna Sandham

  • Macbook Pro: Third party charger??

    Hi! I can't seem to make up my mind. Should i save some money and buy a third party charger for my macbook pro, or should i just buy an apple brand charger?
    Thank you for reading!

    Apple Brand Charger.

  • Iphone 4S will not charge, error that USB device not working, found any suggestions?

    iphone 4S will not charge, error that USB device not working, found any suggestions?

    Hello Chambless,
    The troubleshooting steps below can help get your iPhone to charge.
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
    Make sure that there are no bent pins in the connector.
    Make sure that the connector is free from debris.
    If there are bent pins or debris, please contact Apple Support.
    Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue is persists, please contact Apple Support.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/HT1476
    Cheers,
    Allen

  • Iphone 5 not charging after using third party charger.

    I know there's a lot of threads that discuss this topic but I haven't found someone who has the exact situation as mine.
    I broke my original charging cable and replace it with a third party thunderbolt cable. It charges once by fluctuating all the time. Now my battery is 0% and the third party thunderbolt cable doesn't work. I decided to replace it with an original thunderbolt cable but it still doesn't charge. It doesn't show anything even the battery symbol. Just blank off screen. I also let it plugged as I hope that it just needs to charge the battery because it's drained but I guess that's not the case. I'm charging via the wall charger.  I also tried to connect it in the usb port of my computer and it still doesn't work. Any fixes that you guys can recommend? I am on a panic right now. . Technically this cable should work as this is the cable from apple. Thanks.

    Yes I'm well aware of patents but I have used third party chargers fine with all my previous iphones. I can buy replacement third party chargers to all my other electronics, why is it that apple has to tie me into using their charging cable, it is anti-competitive and possibly an illegal practice.
    If you aren't going to offer helpful advice, then please don't state the obvious!! I wasn't aware that cables were under warranty, so being in a position that I couldn't afford another apple charger I have used another charger which has by the looks of things broken my phone. So again can I do anything to try and fix it? Does anyone know whether I have a case against the manufacturer of the 3rd party cable? Is apple being anti competitive? Id appreciate helpful comments please.

  • Third Party Vendor Error

    Hello everyone
    We have certain vendors who are set up in the system with wagetypes such as 2AFL,2DEN and 2MED, which are used for deducting money from EE's paycheque and then sending to third party vendor.
    However, when I compare the vendor report and the report of how much has been removed from the EE's paycheque, I see that a couple of hundred dollars is missing.
    The money has been deducted from EE pay but its not going to the vendor.
    I know that wagetypes are linked to symbolic accounts which in turn are linked to the GL accounts.
    Any suggestions on why this error could be happening ?

    Hai..
    There are certain deductions like say for Ex.. Garnishments where the total amount deducted from the employee is not directly posted to vendor's account small part of the amount goes to employers as service charge...
    so in this case the total deduction amount will be reflected from the EE. But will not be reflected in the Vendor..
    Kindly make sure if 100% of the deduction is being credited to vendors account.. to aviod inconsistencies...
    Manohar

  • Third party process - error

    Dear all,
    In the third party process, have we to create outbound delivery?
    I have created PO from PR of  a third party sales order. And now, i don't understand to delivery to customer.
    Pls tell me solution.
    If we have to create outbound delivery from that sales order, i get errors:
    Item category TAS is not defined and Item category TAS is not defined, so item 000010 will be disregarded. I also checked in VOV4, VOV6, VOV7.
    Thank you,

    Hi
    In third party scenario the material is delivered to your customer thro out side vendor
    You are billing your customer
    Vendor is billing you for the material he has delivered to your customer
    Here we dont make any delivery
    Process Flow for 3rd Party Sales
    Customize the third party sales in summary:
    1. Create Vendor XK01
    2. Create Material u2013 Material Type as "Trading Goods". Item category group as "BANS".
    3. Assign Item Category TAS to Order type that you are going to use.
    4. A sale order is created and when saved a PR is generated at the background 
    5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
    6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO 
    7. Goods receipt MIGO 
    8. Goods issue
    9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the configuration and,   therefore, there is no delivery process attached in the whole process of Third party sales.
    10. Billing
    SD -  3rd party sales order Create Sales Order
    VA01
          Order Type
          Sales org, distribution channel, div
          Enter
          Sold to
          PO #
          Material
          Quantity
          Enter
          Save
    SD -  3rd party sales order View the PR that is created with a third party sales order
    VA01
          Order Number
          Go to Item Overview
          Item ->Schedule Item
    SD -  3rd party sales order View the PR that is created
    ME52N
          Key in the PR number
          Save
    SD -  3rd party sales order Assign the PR to the vendor and create PO
    ME57
          Key in the PR number
          Toggle the "Assigned Purchase Requisition"
          Execute
          Check the box next to the material
          Assign Automatically button
          Click on "Assignments" button
          Click on "Process assignment"
          The "Process Assignment Create PO" box , enter
          Drag the PR and drop in the shopping basket
          Save
    SD -  3rd party sales order Receive Goods
    MIGO_GR
          PO Number
          DN Number
          Batch tab , click on classification
          Serial Numbers tab
          Date of Production
          Flag Item OK
          Check, just in case
          Post
          Save
    SD -  3rd party sales order Create Invoice
    MIRO
          Invoice Date
          Look for the PO , state the vendor and the Material
          Check the box
          Click on "Copy"
          Purchase Order Number (bottom half of the screen)
          Amount
          State the baseline date
          Simulate & Post
          Invoice Number
          *Invoice blocked due to date variance
    SD -  3rd party sales order Create a delivery order
    VL01N
          In the order screen , go to the menu Sales Document , select "Deliver"
          Go to "picking" tab
          State the qty and save
    SD -  3rd party sales order Create a billing document
    VF01
          Ensure that the delivery document is correct in the
          Enter
          Go to edit -> Log
          Save
    Hope the process is very clear to you now
    Regards
    Raja
    Edited by: ramanathan raja on Sep 18, 2008 3:06 PM

  • SD Third Party sales error

    Hi Friends,
    In Third Party sales everything I did properly that created sales order for Third part Item ( BANS), when we save the sales order system has given the Purchase requistion. Then I go to ME57 in that I have specified the PR NO system has generated the Purchase order. But in in MIGO when I specify the PO NO system throws a error that purchase order has no itmes.
    Can u plz help me out
    Thx& regards
    Satish

    Hi Satish,
    The Issue might be Release Procedure.
    Please go T.code  ME54N.
    Ex: PR creator - clerk or Business user -  
    Approver    -  Supervisor                 -   R1
    Approver  -   Project Lead              -   R2
    Approver   -  Asst. Manager             -  R3
    Approver   -  HOD/General Manager  - R4
    Please find the below link
    http://wiki.sdn.sap.com/wiki/display/ERPLO/ReleaseprocedureforPurchaseRequisitioninMM
    Hope this will help you
    DASARADHA

  • Third Party sale error

    Dear Gurus,
    The below error does not allow me to save the P.Order. I am configuring the standard third party sales schenario where the Item category is TAS and Schedule Line Cate. used  is CS.
    The material type I used is Trading Goods. I created a sales order with the TAS item which generated a PR using which I was trying to create a PO.
    Kindly help me.
    The error is:
    Sales document item 2500500189 000010 is not defined for the transaction
    Message no. V1198
    Diagnosis
    You have tried to carry out a business transaction for this sales and distribution document item which, for this item, is not allowed.
    This may be due to the fact that this item is not part of a make-to-order production with cost management in the sales order.
    Procedure
    Please check your entries.
    Many Thanks
    Kumar

    Hi Sridhar,
    This link explans the thrid party process which I am aware of.
    Could you please help me resolve the above said error?
    I have googled every where on the internet and could not find a resoltion.
    Thank You
    Kumar

  • Third party remittance Error

    Hi
    While running the third party remittance program PC00_M99_URME - Evaluate remittance (New)
    I am getting the error "No entry in table T51RK for key 00000"   There is no remittance rule 00000 which I have defined. Nor this entry is present in the table.  but I am getting the message
    THere is one more messga e which I am getting "No entry in table 3 for key 90000001 20.06.2008"
    This 90000001 entry is in the HR payee table but this entry is not linked to any of my vendor or wage types. when I delete this entry I still get this message.
    Any clue ?? Is there a note ?

    It sounds like you have the wage type tied to third-party remittance via table T512W, processing classes 73 and 78.  Do you want this wage type to remit and it is generating an error or are you getting the error and do not intend to remit?

  • Third party billing error

    Hai friends this kiran
    when i am doing the process for third party sales i got the error at billing level.
    i rasied the sales order with item category TAS and got the requisetion number. with that reference PR i did PO and done the migo also. when i am doing the invoice with reference to order system is shopwing error message.
    I configured and checked at item level which is TAS order related billing with B and F also.
    plz give some lights on that

    Hi Kiran,
    since its third party before you do billing you also need to do that MIRO ie invoice verification. Then do the billing with billing relvance as F- order related billing status accoring to invoice qty. And i only you have MIGO if at all only as statistical, since in third party we dont receive the stock physically into our plant. It directly goes from vendor to customer.
    regards
    sadhu kishore

Maybe you are looking for

  • What do I need to connect my late 2009 Mac book (mini display port) to the TV and get sound?

    I'm totally confused! I have a late 2009 model Macbook. And I want to connect it to my TV. So my research has led to believing I need a Mini display port adapter and a HDMI cable - but from some of what I have read, this won't carry sound... Can anyo

  • Unable to install recent version of itunes.

    Hi! I'm trying to install the recent version of itunes. I have had no success. I keep getting an error message that says " Apple Moble device failed to start. Verify that you have sufficient priveleges to start system services" . Then,  I also get a

  • Value not visible in preview mode

    Hello there, On my dashboard, between other things, I have a simple grid component which should just show some resulted values. The problem I have is that when I connect the grid with the range of cells, everything looks fine but in preview mode, one

  • Kernel Panic causing my iMac to restart

    iMac (27-inch, Late 2009) Processor 3.06 GHz Intel Core 2 Duo Memory 8 GB 1067 MHz DDR3 Graphics ATI Radeon HD 4670 256 MB Disk Space 406.5 GB free of 2 TB All Apps are up to date OS X Yosemite version 10.10.1 (14B25) Any idea what is causing this pr

  • Upgrading Camera Raw

    Why do I get the error message "Photoshop Camera Raw 7.1 Installation failed. Error Code: U44M2P7" when I try to upgrade Camers Raw?