Z87-G45 Detects SSD, but not Windows installed in it

So the problem started last night when my computer wanted to "update and shut down". I did that, and the next startup, the Killer 2200 would not work. So I followed the steps here to get rid of the killer suite and install just the driver. Hours later, I suffered my first BSOD with the error msg IRQL_NOT_LESS_OR_EQUAL
Now, every time I boot up, it will NOT detect the Windows 8.1 boot up, but it DOES detect the SSD that window's is installed.
So how do I fix it every time? I keep reflashing and reinstalling BIOS version 1.9, that has been the only method that has gotten my computer to detect windows.
I have talked to support already and they informed me that I need to send the motherboard in for repair/exchange. But does anyone have any advice in maybe attempting to fix this issue?

Hi,
Your SSD or memory might be damaged.
Try use only one RAM stick at one time , and try with different RAM stick,
or run memtest/HDD test tool to see if the RAM/SSD is okay.

Similar Messages

Boot into Rescue and Recovery but not Windows

Everytime my pc is powered on or restarted, it boots into Rescue and Recovery, but not Windows.
What can I do?

Hi,
first I would like to explain one thing, so that we are on the same page with the RnR partition.
Vista and XP are using different RnR partitions and the location of these aprtitions is placed on the HDD is different way, so that it can be used in conjuction with your Operating system.
So in the time, where you have used the XP and OS, the RnR partition was placed in the partition table on the end/back. DIrectly after you upgraded to the Vista and did not made any changes to the RnR partition, than it is still on the end/back, which is not the corect way. Becase the Vista should use the RnR partition, that should be placed on the begind/start/in the front of all the other partitions.
So in case there was no change made to the RnR partition, like relocation, or reinstall using the Vista RnR version, then you will not be able to boot into it.
So here is what I would advice you to do:
- reinstall, or download and install the Vista version of RnR (the latest version) => this will rewrite the partition table and in case of need it will create the RnR partition.
- use bmgr32.exe , which is located on your HDD by default to rewrite the partition table. Please start it from command line in follwing way:
bmgr32.exe /phil
==> this will bring you all the command line options and you can use it based on this.
NOTE:
Plase note, that once you captured some backups using the XP version of RnR , or a different version of RnR, then it's not possible to restor the backups using a different version.
Simple: you must use the exact same version of RnR for backup and also for the restore process.
Let me know, if you have any more informations to this situation.
Cheers

Can connect to Mac users, but not Windows.

I have been able to connect to other Mac users signed onto AIM accounts in iChat, but not Windows users signed onto AIM. Help with this problem would be greatly appreciated, as I am at college and away from all my loved ones, and desperately want to chat with them.

Hi,
I am sorry that only 2 hours and 15 minutes left you disappointed.
Some things to consider.
1) they have to be on XP.
2) they have to be using AIM 5.9 or Trillian Pro
3) if they use AIM 5.9 they have to Tune the Camera and Mic to the Application. See message 570 in that link (Access to these preferences in in the My AIM menu now or use F3)
4) Whichever App they use it has to be Enabled through the XP firewall. IF at Service Pack 2 they need these instructions an earlier version of XP has to have the Firewall disabled.
Longer version http://www.ralphjohnsuk.dsl.pipex.com/page12.html
Detailed version
http://www.mvldesign.com/videoconferencetutorial.html
The ports that iChat uses have to be opened at your end although it sounds like they are.
The port for AIM/Trillian have to opened in their modem at their end.
All this info has been posted before resulting in an FAQ
http://discussions.apple.com/thread.jspa?threadID=406147 linked in the yellow bar item at the top of this Topic area.
8:57 PM Thursday; February 15, 2007

I have an external HD with PDFs and these can be opened in XP and Windows 8 but not Windows 7.

I have an external HD with PDFs that can be opened with Windows XP and 8 but not Windows 7. Different version of Adobe reader and Pro on the Windows 7 systems does not make a difference.

What Reader version you have on Windows 7?
Can you open such a file with Notepad, then copy and paste the first few lines here in the forum?

ORA-22835: Buffer too small for CLOB to CHAR on Solaris but not Windows

Hi,
I get the following error on Solaris but not Windows equivalent 10.2 installations
ORA-22835: Buffer too small for CLOB to CHAR or BLOB to RAW conversion (actual: 4575, maximum: 4000)
ORA-06512: at line 65
the code causing the problem is:
SELECT A.TABLE_NAME, A.DEFAULT_DIRECTORY_NAME, B.LOCATION,
CASE
WHEN INSTR(A.ACCESS_PARAMETERS,'RECORDS FIXED')<>0 THEN
SUBSTR(A.ACCESS_PARAMETERS,INSTR(A.ACCESS_PARAMETERS,'RECORDS FIXED')+14,3)
ELSE NULL
END RSZ FROM USER_EXTERNAL_TABLES A, USER_EXTERNAL_LOCATIONS B
WHERE A.TABLE_NAME = B.TABLE_NAME(+);
the entire code being executed is:
DECLARE
EX BOOLEAN;
CNT NUMBER;
SQL1 VARCHAR2(4000);
FLEN NUMBER;
BSIZE NUMBER;
TABNAME VARCHAR2(4000);
DEFDIR VARCHAR2(4000);
RSZ VARCHAR2(4000);
ECODE NUMBER(38);
ERRMSG VARCHAR2(4000);
CURSOR C1 IS
SELECT A.TABLE_NAME, A.DEFAULT_DIRECTORY_NAME, B.LOCATION,
CASE
WHEN INSTR(A.ACCESS_PARAMETERS,'RECORDS FIXED')<>0 THEN
SUBSTR(A.ACCESS_PARAMETERS,INSTR(A.ACCESS_PARAMETERS,'RECORDS FIXED')+14,3)
ELSE NULL
END RSZ FROM USER_EXTERNAL_TABLES A, USER_EXTERNAL_LOCATIONS B
WHERE A.TABLE_NAME = B.TABLE_NAME(+);
TYPE C1_TYPE IS TABLE OF C1%ROWTYPE;
REC1 C1_TYPE;
BEGIN
OPEN C1;
FETCH C1 BULK COLLECT INTO REC1;
FOR I IN REC1.FIRST .. REC1.LAST
LOOP
UTL_FILE.FGETATTR(NVL(REC1(I).DEFAULT_DIRECTORY_NAME,'CARDSLOAD'),
REC1(I).LOCATION, EX, FLEN, BSIZE);
IF EX THEN
IF INSTR(TO_CHAR(REC1(I).RSZ),'\.')<>0 THEN
     DBMS_OUTPUT.PUT_LINE('INVALID RECORDSIZE OR CORRUPTED FILE');
     END IF;
     DBMS_OUTPUT.PUT_LINE('Table Name: ' || TO_CHAR(REC1(I).TABLE_NAME));
DBMS_OUTPUT.PUT_LINE('File Exists '||REC1(I).LOCATION);
     DBMS_OUTPUT.PUT_LINE('File Length: ' || TO_CHAR(FLEN));
     DBMS_OUTPUT.PUT_LINE('Record Size: ' || TO_CHAR(REC1(I).RSZ));
DBMS_OUTPUT.PUT_LINE('Block Size: ' || TO_CHAR(BSIZE));
     DBMS_OUTPUT.PUT_LINE('# RECORDS: ' || FLEN/TO_NUMBER(REC1(I).RSZ));
     BEGIN
     CNT:='';
     SQL1:='SELECT COUNT(*) FROM '|| REC1(I).TABLE_NAME;
     EXECUTE IMMEDIATE SQL1 INTO CNT;
DBMS_OUTPUT.PUT_LINE('SELECT COUNT FOR: ' || REC1(I).TABLE_NAME||' = '||CNT);
     EXCEPTION
     WHEN OTHERS THEN
     DBMS_OUTPUT.PUT_LINE('SELECT COUNT FAILED FOR: ' || REC1(I).TABLE_NAME);
     ECODE := SQLCODE;
ERRMSG := SQLERRM;
DBMS_OUTPUT.PUT_LINE(ECODE||' '||ERRMSG);
     END;
ELSE
DBMS_OUTPUT.PUT_LINE(REC1(I).TABLE_NAME||' '||REC1(I).LOCATION||' File Does Not Exist');
END IF;
     DBMS_OUTPUT.PUT_LINE('-----------------------------------------------------');
END LOOP;
CLOSE C1;
EXCEPTION
WHEN OTHERS THEN RAISE;
END;
Any ideas why Solaris but not Windows would have this problem?
Thanks,
Victor

Check out Bug 4715104 - ORA-22835 / truncated data from USER/ALL/DBA_EXTERNAL_TABLES

Satego x200 - BIOS won't detect SSD but windows 7 will for OS use

need some help here i got the latest bios 2,50 and my bios wont detect the ssd but one i boot into windows 7 from my hdd it gets detected and i want to use the ssd as boot drive,please help

guys im starting to think yall misunderstood , first off i got a maxflash 256gb ssd firmware 1571 second i said it gets shown in the first page of the bios , but its nowhere shown in boot devices list ,and if its not shown in boot devices list of course theres no way booting off of it so i cant use it as os drive, now heres the clue once im in windows 7 it gets detected as ssd , i think the onboard rom controller for hdds needs an update but how ,-,- any help would be appreciated,peace
Message was edited by: breakdown234

MSI Z87-G45 GAMING VGA Driver for Windows 8.1

I have a MSI Z87-G45 GAMING motherboard. I want to know when a driver for Intel On-Board VGA Drivers will be released for windows 8.1 because most of the applications (Visual Studio, windows photo viewer, etc.) are all crashing on windows 8.1 but worked fine on windows 8.
Driver Version installed: 9.18.10.3215

Quote from: xSpartanx on 23-October-13, 12:29:55
I have a MSI Z87-G45 GAMING motherboard. I want to know when a driver for Intel On-Board VGA Drivers will be released for windows 8.1 because most of the applications (Visual Studio, windows photo viewer, etc.) are all crashing on windows 8.1 but worked fine on windows 8.
Driver Version installed: 9.18.10.3215
The latest one is 10.18.10.3316 (released 2 days ago):
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23339&lang=eng&wapkw=windows+8.1

Video that appears in iTunes but not Windows Explorer crashing iTunes

I added some videos to my iTunes library today, and I tried to sync my iPod. When I connect it, I get the "Updating iPod, do not disconnect" message, but it doesn't say exactly what it's transferring. After a little while, I get the notification that iTunes is crashing and the option to send an error report.
I updated iTunes to 6.0.3 earlier today, and updated my iPod to see if that would fix anything. When it didn't, I checked to see if there was something wrong with any of the videos. I tried deleting the videos, until iTunes crashed again. Whenever I try to delete, or play, or right-click this video, it crashes. I thought that maybe there was a problem with a video, so deleting it through Windows Explorer might have some effect, so I went to where it would be stored, and . . . it wasn't there.
I know that a file being listed in the library but not actually stored in Windows would normally just result in the exclamation-point-in-a-circle icon, but could this be what's causing iTunes to crash? Is there a way to delete something from the iTunes library without actually going through iTunes?

Okay, I managed to fix it after uninstalling iTunes and installing an old version . . . but of course, after I had everything up and working again, I ended up causing it to happen again. The upside of that is that I now know how it happened and an easier way to fix it.
The corruption of the file occured when trying to type in an artist on a file whose tag I had modified with iPod TVShow . . . it said "Editting tag", then crashed for the first time, and crashed again whenever I tried to edit that. Though, I found that that can be fixed just by deleting the movie file first through Windows Explorer, and then through iTunes (I didn't see it in Windows Explorer originally because I didn't realize that the re-labeling of the artist never went through, so I looked in the wrong folder, and I wasn't able to use Show Song File in order to see where it was, what with the constant crashing). Hopefully that'll help if anybody else ends up with the same problem.

IPhone shows up in iTunes but not Windows Explorer (after most recent iPhone update)

The phone shows up as a device in Devices and Printers, but not in the Device Manager...
Tried other suggestions, iPhone was unlocked when plugged in, restarted phone, uninstalled driver, restarted phone, etc. Running Windows 7, but same issue on other versions as well, all since last iPhone update. I did not have any prior issues with getting to my photos in Explorer!!!!!

Thanks.
That's wonderful, so now we are forced to use iTunes (the most unintuitive piece of crap program ever), or use a Mac and Image Capture??
or put them into the Cloud for everyone to see?

802.11ac works in OSX but not Windows 7

My Haswell Macbook Air connects to my new Airport Extreme with 802.11ac in OSX but in Windows 7 with the drivers in BootCamp 5.1.5621 I only connect with 802.11n.
I can't find any new drivers for Windows -- has anyone had any luck?

Not the answer for your question. But I have Steam on my mac. You can download it on their website!

Artwork Shows up on Mac, iPad, iPhone, but not Windows

My main iTunes library resides on my home Mac. I access the library via an iPad Air, iPhone 5S, and a Dell PC running on Windows 7 Enterprise.
All of the songs have album artwork. All of the artwork shows up on the Mac, the iPad, and the iPhone. Much of the artwork does not show up on the Windows machine. The Mac & Windows box are running the most up-to-date version of iTunes.
I have tried enabling and disabling iTunes Match on the Windows machine. I've also completely uninstalled iTunes and removed all associated files from APPDATA, then reinstalle iTunes. No joy.
Our organization has a policy that doesn't permit the Bonjour service to run automatically. I have to restart it every morning when I come in. It used to be that restarting the Bonjour service and restarting iTunes would cause most, but not all, of the artwork to appear. Now that trick no longer works.
Any suggestions? Thanks!

Hi there Kenneth Kirksey,
I see that you are seeing some issues with the song and album artwork in iTunes Match. I have an article for you that can help you troubleshoot this issue, and it can be found below:
Songs or albums are missing artwork
If some songs or albums downloaded to an iOS device from your iCloud library are missing album artwork:
Make sure you have the latest version of iTunes. You can download the latest version for free.
Launch iTunes on your computer.
From the iTunes menu, choose Advanced > Get Album Artwork.
Once iTunes has completed processing the album artwork, you'll need to update iTunes Match.
From the iTunes menu, choose Store > Update iTunes Match.
Once iTunes Match has finished updating, launch the Music app on your iOS device.
Locate the songs that are missing artwork, and delete them from your device by swiping left over a song.
After you've deleted the song, download the item again from your iCloud library by tapping on the download icon.
How to troubleshoot iTunes Match - Apple Support
https://support.apple.com/en-is/HT204406
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

CommandAction works through OnDeviceDebug, but not when installed from jar

Hi everybody,
I'm trying to run a HelloMIDlet example and if I run it on emulator it works fine, also when I run it on mobile through OnDeviceDebug from eclipse it works fine, but when I install a jar file and run the application it ends with Application Error message and it exits. I found out that the problem might be in the CommandAction method, because when I use this:
public void commandAction(Command c, Displayable s) {
          notifyDestroyed();
}then the application works also when installed from jar, but when I use this:
public void commandAction(Command c, Displayable s) {
   String label = new String("Exit");   //just for test
   if (label.equals("Exit"))
     notifyDestroyed();
}then it ends with Application Error right after I run the program (and it works when I use OnDeviceDebug). I'm using jdk1.5.0_06 and WTK from Sony Erricsson (my target device is W800i, which supports CLDC1.1 and MIDP2.0)
My manifest file is
Manifest-Version: 1.0
MicroEdition-Configuration: CLDC-1.1
MIDlet-Name: HelloMIDlet
Created-By: Sun Microsystems Inc.
MIDlet-Vendor: Sun Microsystems, Inc.
MIDlet-1: HelloMIDlet, , HelloMIDlet
MIDlet-Version: 1.0
MicroEdition-Profile: MIDP-2.0
MIDlet-Description: Hello Worldand I don't use the jad file when installing the application (seems to be unecessary when you have a manifest file inside the jar). And I'm unable to debug it because when debugging then it works normally. Also I tried to recompile the BluetoothDemo and the same error(and works through OnDeviceDebug). And when I installed the jar file, which is originally distributed with BluetoothDemo then it worked. When I compared original jar file and my jar file then the only difference was in the size the class files (class files compiled by me were bigger then the class files in original jar file (which work)).
Any ideas guys and girls?

I tried that approach but it doesn't work either. I think maybe my directory structure is wrong.
C:\IRS\IRS.jar
C:\IRS\irs.hs
referenced: jar:file://C:/IRS/IRS.jar!/irs.hs
Am I doing this right?

Z87-G45 Gaming USB3 driver not installing

Ok I may not be looking with the correct enquiry for search, but I can't get my USB3 drivers to work, and I can't find an answer here... When I install "Intel USB3.0 Driver" I keep getting "This computer doesn't meet the minimum requirements for installing the software" I have a USB3 LITEON Bluray burner, but Windows 8.1 can't find it...? Can't even see it in Bios...? It worked perfectly before... What am I missing...?

Quote from: Nodeity on 20-March-14, 12:48:50
It worked perfectly before... What am I missing...?
With what OS?

Cannot get Itunes to regonize my Itouch. Have tried all troubleshooting tips with no luck. Use to work just fine but not after installing Windows 7 and itunes 10. tried starting mobile device but get error code 193: Oxc.1. Any help out there?

cannot start apple mobile device. error code 193: Oxc.1

Actually my iTunes just started!!!!
So if anyone else is having this problem, the last thing I tried was copying the QTMovieWin.dll from my C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to my C:\Program Files (x86)\iTunes folder and started my iTunes Helper.exe
Hope that can help someone!

Z97-G45 sees SSD but won't boot from it.

Howdy,
I recently purchased mentioned MB and thought I could use my Windows 8.1 ssd from my old pc. I can see the drive when I'm in the BIOS (UEFI?) but I can't boot from it. I can boot to my Windows 8 DVD and it looks like I can reinstall Windows but that's not what I want to do.
The old machine is 5+ years old, an LGA 775 board. Do I have any choice other than to re/install Windows?
thanks
Mike

you may have a problem I had. I got a msi gaming 5. tried installing it on my OCZ Vertex 2. it kept on blue screening. but it was at boot and left no log. after a long look on Google I found that the new Haswell platform is incompatible with older first gen Sandforce controllers.
post your pc spec, including your ssd make and model.
look in your bios to see if it has a option for uefi or uefi and legacy. select uefi and legacy. if that don't work you need a new ssd.

Z87-G45 Detects SSD, but not Windows installed in it

Similar Messages

Maybe you are looking for