ZCATS_CONF - Note 505134: Analysis report for confirmation

Hello guys
The note 505134 tells about checking the consistency of confirmations for networks, maintenance orders or service orders.
But in my installation (SAP_APPL Release 605, level 6) I cannot see this tool.
It is a transaction ? Or must I use SE38 or SA38 ?
Anyway the system says me
Transaction ZCATS_CONF does not exist
Or
Program ZCATS_CONF does not exist
Where do I am wrong?
Thanks in advance
Salvo50

Hi,
ZCATS_CONF is a program (report) so can be run from SE38. However it must first be added to the system from the note.
As the note is not yet marked valid for 605, you will need to copy it manually from the note.
-Paul

Similar Messages

No data in Application failure Analysis report for a particular application alone.

Dear All,
We are not able to get the data in Application Failure Analysis report from Appadvisor for a particular application(say ABC) alone, whereas it works fine for different application. Also,we could get the data from other reports(such
as Application status,Problem distribution analysis,etc) for the same application(ABC). PFB snapshot for your reference.
Thanks in Advance.
Regards,
Rajesh Kumar C

Hi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Age Analysis report for asset

Hi All,
I have to create a Age analysis report for FI documents
which have line items with posting key 75 & 70 (Asset)
Given logic is
1 Selection screen has parameters - Company code, Key date
2 Need to take all line items with posting key 70 & 75
(BSEG-BSCHL = 70 or 75)
Layout of report is
Asset no       0-30 31-60      61-90      91-120 . 151-360 (days)
80000003     2000.00    3000.00    1000.00   4000.00    7000.0
80000006     1000.00    5000.00     300.00    5000.00    4000.0
Local curency amount should be categorised under the days
diferences between key date (selection screen) & posting date
of the accounting document.
My problem is,
Posting date of the document is not in the BSEG table. It is
in the BKPF table.Therefore I have to extract all FI documents(Not only documents with posting key 75 or 70) within 360 days from Key date in BKPF the table.
I cannot join BSEG & BKPF. Because, BSEG table is a cluster table.
Can you please tell me the way how can i extract the data for this report with out any performance issues.
Pra

Great idea, but I dont think it is going to work.
The 1st problem should be, how do you work out the key date... You will need some good code for that.
Have a look at the customer aged debt reports for some help.
After that, if you just want asset documents, do they have their own unique document type, if so, you could use the doc type from BKPF to reduce the number you want to select in BSEG.
Have you looked at any of the standard Asset dep reports, perhaps there is something there you could use.

Cost Analysis Report - For a range of process orders

Dear all,
Is there a standard report available to get the cost analysis for a range of process order? COR3 --> Go to --> Cost --> Analysis. Here I can see the cost analysis for one report. But I wanted to get the cost analysis report for a range of process orders. Please help.
Thanks
Nagarajan

Dear
You can use cost analysis report like
1.S_ALR_87099932 - Variances Between Costing Runs
2.S_ALR_87099931 - Price vs Cost Estimate
3.S_ALR_87099932 - Variances Between Costing Runs
5.KOC4
Regards
JH

Analysis report for standard cost in CK33N

Hi,
Analysis report for standard cost
Using variant Z003 in CK11N.
Planned cost 3 is the output used for planning and this is adjusted by making changes to the BOM throughout the process
In CK33 you compare the 2011 cost for the product with the proposed cost for the next year. For some parts it works and for others it splits the lines, though the calculation is still correct.
Regards,
T.Harish Kumar

Hi Revital,
I believe the last option is correct.
Thanks,
Gordon

SC Report for Confirmation Details

Hi All
We are in SRM 7 EHP 2.
We are doing Confirmations in SRM Portal only
We have a requirement to create as Custom Report for Confirmation Details with below fields.
1. Company Code
2, Purchasing Organization
3. Account Assignment
4. Confirmation Name
5. Status
6. Requester
7. PO Number
How can I do it, Please advice
Thanks
Ajit

Hi Ajit,
Explore the possibility of achieving this with a new POWL query?
Use the existing POWL in the confirmation screen as a starting point to see what can be modified to suit your requirement.
- Sai.

Aging Analysis Reports for Inventories & Receivables

Hello,
Can any one answer me how to get aging analysis reports for inventories & receivables in SAp R3 system?
Thanking You,
Regards
Santosh Rothe

hi
the age analysis report format should be like
Material list   | 0 - 3 months | 3 - 6 Months | 6 - 12 months | above 1 year|
M1                10                  50                    0                       0               pc
M2                0                   0                      12                    10               Kg
etc .
Pls suggest the suitable T.code or step for configuring to get in the above report format
Regards
Santosh Rothe

Aging Analysis report for open Items in SD

Hi ,
Please give the code snippet for the following case.
aging analysis program for open items:-
payments not receivecd for 15 days,30 ,60 ,90days
imput:
custno range
sales area
days 30,60,90 selection sort by cust no,sales organization
output :report program ALV grid format
Many Thanks in Advance.
Raj

There are couple of Standard Report for Customer Open Items.
RFDOPO00 - List of Customer Open Items.
RFDSLD00 - Cutomer Balances
Also there is another standard report....
Run the Tcode 'S_ALR_87012178", that is "Customer open Item analysis by Balance of Over dues".
Copy the Report and make necessary changes.
Modification is always required to get a "good looking" aging report, there is no standard.
Hope this helps.
Vinodh Balakrishnan

Standart report for confirmation

Dear all,
I need to enter task list number and items and need to list in which pm orders and by whom it is confirmed?
Any standard report for that? if no can i create a query? by joining which tables?
thanks
JMQ

hi
in standard you are confirming only through order with combination of operation or confirmation number ,i think it is not possible to get in standard.
you can create the query but whether the output you required will display iam not sure, while creating the Query try creating using logical database and check
regards
thyagarajan

Account Analysis Report for GL

Hi all
i want to add new column to this report but executable file type is java concurrent program. can any one help me in getting this solution...

Is it related XLA? Short Code is XLAAARPT?
This CP is XML Pubsliher Implemented.
Check whether your column / information is already available in output xml (Diagnostics button -> View XML).
If yes, change the rtf to include your column also.
If not, you need to copy the Data Definition and rtf and do the required changes and even the concurrent program and have custom report for Account Analysis.
By
Vamsi

Value in KEAW but not in S_ALR report for a particular account

Hello,
Find value in CO in KEAW for a particular account but not in S_ALR_87013542 report . The account belongs to Cost of sales category .
Can someone please inform the reason for this posting not appearing in S_ALR but in KEAW .
With regards,
Mrinal

Derek,
Please read the following from Anton Nielsen...
http://c2anton.blogspot.com/2008/12/oracle-application-express-apex-three.html
Let us know if you have questions after.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

Sales Analysis Report for Batch Numbers

I am currently having an issue with Batch numbers and sales analysis report item wise. If the goods are delivered it does not show the quantity in the report. is there a way to make the quantites show. Open delivery notes show the quantity in the report. Could the reason be that once the delivery note is closed the quantity does not show in the report.????

Dear Mr Shah,
If I understood correctly, you are saying that there is no issue in adding the document with the batch but it is not shown in the Sales Analysis report?
The Sales Analysis report does not show information regarding the quantity because it focuses on the value of the document.
In order to have an overview on the trasactions related to the batches please use the Batch Number Transaction Report under Inventory - Inventory report.
Regards,
Marcella Rivi
SAP Business One Forums Team

POWL does not update Expense Reports for Approval

Hi,
I am about to replace the UWL with POWL and the configuration have been made successfully when it comes to leave approval and expense reports but the Expense reports for approval refuses to update itself (no items in the list)
If I go to Transaction code SWI5 am I able to see all u201Cwork items to be processedu201D . From this list I can see three Task IDs
TS12300097      Approval Process (1 work Item)
TS31000007     CATS: Approval by Supervisor (1 work item)
TS99300002     Approve travel expenses (2 work Items)
In transaction POWL_COCKPIT in the maintain POWL Type details I have flagged the Sync. Call for FITV_POWL_TRIPSFORAPPROCAL_EXP. I have also assigned same Task ID as Approve travel expenses (TS99300002) to POWL in transaction SM31 table IBO_C_WF_TA_P_SC.
Result is that the list is empty in the POWL but if I go to UWL Authorize list it shows 2 items which is correct.
Please help me out here because I have searched a lot for a solution but havenu2019t found anything.

Remember Employee list is the key! Did you maintain it?
The employee list can also be maintained centrally in the R/3
backend for all users (managers). Therefore please use the
transactions FPB_MAINTAIN_PERS_M or FPB_MAINTAIN_PERS_S.
With this the object list is done for the POWLs.
If no emplyoee list exists for the manager, then there will be no items.
POWL is based on personalization framework where every user has its own
set of queiries and types, which are assigned using TX POWL_QUERYR or
POWL_TYPER which is role based. Similarlaly POWL_QUERYU and POWL_TYPEU
for user based.
If you want to delete a query from all users, please delete a entry from
POWL_TYPER or POWL_QUERYR.
More information on POWL can be get from
http://wiki.sdn.sap.com/wiki/display/WDABAP/POWL
http://help.sap.com/saphelp_erp60/helpdata/EN/42/d6652b755c1630e10000000
a1553f7/frameset.htm
Once you delete the entry, please run the report POWL_d01.Please check
the details of report before running it.

AC 5.3 RAR - combined risk analysis reports for regular auth. and SPM auth.

Dear All,
we have users that have regular day-today authorization and also FF authorization.
Does the Batch Risk Analysis takes into account both authorizations when doing the risk analysis for those users ? will we see it in the reports ?
Thanks
Yudit

ok, so basically the answer is no, in the RAR components we do not have risk analysis for the combinations of the roles assigned to the user and to his FF ID.
in that case, at what stage does the system checks for those combined risks ?
is it checked when we manage the risk analysis phase in the CUP request that is asking to assign the FF ID to the user ?
thanks
Yudit

Vendor Ageing Analysis Report for the postings for this fiscal year

Hi All,
I require report that lists every supplier that my company has spent money in this fiscal year, need the actual average payment terms, number of days etc. And also how much has been spent with each supplier.
Kindly let me know the report or the process to extract this data from SAP R/3 system.

Regarding Ageing analysis of Vendor below three reports may meet your requirements provided transactions to the vendors are done in disciplined manner.
S_ALR_87012078 - Due Date Analysis for Open Items
S_ALR_87012084 - Open Items - Vendor Due Date Forecast
S_ALR_87012085 - Vendor Payment History with OI Sorted List
Regards,
Alok

ZCATS_CONF - Note 505134: Analysis report for confirmation

Similar Messages

Maybe you are looking for