Zen screen info required - Please he

I have a zen 20, the one with the .65" screen. Does anyone know if any other player shares the same screen unit's I need to canabalise one because my screens broken. Any davice would be much appreciated. Thank you!

Update:
Both my sisters and my Zen Sleek have died. They pretty much won't function at all. If I actually boot it up, and go to play a song, the player will just freeze after a couple of minutes. When I go to recovery mode, I cannot clean the disk, and if I can, it will freeze again. I've re-uploaded the firmware twice already, and the same thing happens. What can I do? I can't accept defeat, and buy a new player, because I have no money. I've babied the player, and have only dropped it 3 times.

Similar Messages

CR-23 car kit info required please

Hello, can anyone help a technophobe please? I have bought a car with a CR-23 cradle fitted. I know this covers the 6020 and 6021 phones, but is it possible to simply plug in any other cradles to allow me more options of phone models? If so which models can I choose from? Any info on car kit/phone interchangeability would be appreciated. Thanks Ian

Yes you can change the cradle to any nokia phone that supports pop port connection, hopefully you will have a ck-7w car kit if not you may be in trouble. Have a look at the phone accesories for the phone you have and see if there is a cradle available or let us know your phone.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Zen X-Fi 2----PLEASE HELP STUCK ON ZEN SCREEN

my player is stuck on the ZEN screen and I cant do anything----any suggestions

try resetting it
Push the little button on the lower side of the player with something pointy like the plug of the headphones.
picture: http://media.generationmp3.com/lebel...2/DSCF7769.JPG

Repairing AME - dos command info required

dos command info required
Repairing AME which got damaged in CS3 after installing CS4
"Failed to initialise error".
Repair advice was to run (from the Command Prompt) the following. WMEncodingHelper.exe/regserver
It is found in C:\Program Files\Adobe\Adobe Premiere CS3\
I can get to the directory line and see the .exe file but I do not remember how to run it !
Help please.

>I kind of like an indicator that acknowledges something is happening.
Agreed! Much as I love Firefox, I hate it's lack of a splash screen. Every single program on the planet that has a GUI should have as it's very first action when started to show a small splash screen, just so the user knows the command to start has been accepted. This action should be set to High Priority, interrupting all other actions such as virus scans, other programs closing, downloads, file copies, etc. Once the Splash loads, the rest of the start-up process can return to Normal priority and load in it's proper OS managed sequence.
I can't tell you how many times I've accidentally ended up with three or four browser windows open because there's no indication that anything is happening.

Qualifications info required

Hello All,
I am basically BI Consultant, we have a requirement to pull Qualifications Data from SAP ECC,
Clients requirement is "A relationship is created between a Qualification and either a Job or a Position. Any employee who holds either the job or the position is required to complete this qualification".
How to get the Employees who are mandatory to complete a Qualification and who have not completed the Mandatory Qualification?
I have checked in PEPM(Profile Matchup), where we can find Person->Position and Person->Job along with Deficits.
I wanted to know where does the above data sits in ECC tables physically? because it gives me to configure for BI.
Is there any direct table to pull this info?
Please help me in this, your help will be appreciated.
Regards,
Kiran

Hi Kiran,
In HRP1001 you can get the Qualification - Person relationship (Q-P = B032); the Qualification Value that the Person currently has, is in the HRPAD31 table, so you have to make a join with the ADATANR field. Lets say that a Person has a Q-value of "3" (over a 5 points scale), so we have to compare the Qualification Value assigned to his/her Position or Function to know if he/she has a Qualification Deficit. Again, look in HRP1001 (B031) to get the relationship between the same Q and the Employee's Position or Function.
Regarding the other query, maybe you can find useful transaction: S_AHR_61015532. You specify an Organizational Unit, and you can have all Employees within this Unit with their Qualifications. Make sure to check "Only Q deficits" in the initial screen.
Hope it can helps.
Regards,
Marco

HT201303 security info required ?

Security Info Required?
I just create new account for my new iphone4s.I don't have problem when I sign in with my Apple id password on my Laptop but my iphone is so complicated.
When I try to download an app on my Iphone 4s, something pops up saying "Security Info Required". Then below that it says "To help ensure the security of your Apple ID we require additional information". When I click Continue, It tells me to enter my Apple ID password. So I enter it. My Iphone then brings me to this screen that never loads and asks me to enter my Apple ID password again! So I enter my password again! The it asks me again and again and again! It never stops asking me to enter my Apple ID password. I know I'm not spelling it incorrectly because If I just type something random in, it will tell me I have entered my password wrong.
Please let me know what is wrong?
Thanks

I updated some of my info via apple, mainly changing my password. I then went through the settings and signed out of store and resigned in with the new password.
Previosuly, everytime I tried to install an app the Request Secuity Info screen would pop up, I would fill it out and click done, and then it would reload and keep me at the same page. Finally, I would click cancel and try again and the whole thing repeated itself....
SO back to updating my password in the store, I installed an app, the security questions popped up AGAIN... but this time they saved my answers and proceeded to download my app. YAY

Why no screen info in status??

Hello everybody,
I just ran a std program: balvex01 and the selection scree (no. 1000) came up. then I hit F8 (execute button) to see the alv. but why was I not able to see the screen no for this alv in the system->status menu? What is the screen where I saw this alv? Please look into this prog.?
Thanks,
Charles.

Yes.. you will not have the screen info for the list generated by ALV.
It is like in simple report, if you run you will not have the screen information on the status.
In short, we don't have the screen information avaliable for the LIST which is generated by WRITE statement in the status.
Regards,
Naimesh Patel

When downloading an ap, it asks for security info required

when i goto download an ap, it asks for my apple id and password. Then it pops a screen upsaying Security Info Required. to help ensure the security of your apple id, you must confirm your password and answer your security questions. What gives?

Humm... This appears to be the answer:
http://news.cnet.com/8301-13579_3-57413072-37/apple-ios-users-face-tighter-secur ity-to-access-accounts/
Bob

Iphone 3gs Up IOS6 beta2 is normal use but today is Show up Screen "Active Required"

iphone 3gs Up IOS6 beta2 is normal use but today is Show up Screen "Active Required"
but cannot active Screen is " We re unable to complete your device"
This device is not registerd as part of the iPhone Developer Programe
If you are a member of the programe, please register your device in the iPhone
Developer Programe Portal at
http://developer.apple.com/iphone/
But i register already but Cannot Active
Please help me.

I think my problem is fixed now.
For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please

I opened my iPod Touch up to fix my home button. When i closed it back up it had a white screen. I tried pressing lock and home button for 10 seconds and it worked but while i'm using it it goes white with lines on the screen. Help please. This has been happening for a while and i've tried everything but it doesn't work.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

My daughter disconnected her iPod nano from the lead before ejecting the device. It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?

My daughter disconnected her iPod nano from the lead before ejecting the device. It no longer syncs and we have re-set the device, but it now only occasionally appears on the computer screen any suggestions please?

Restoring the iPod will do nothing to his iPhone.
When you restore it wipes the iPod clean no matter what computer you use.
The only plus to doing it form your home computer is if you have a backup stored there, then you can restore from the backup once it's done wiping.
If you are away form your home computer, go ahead and use the computer you have to restore it, then when you get home, you can restore form any backup you may find. You can use this to help you do that when you get there: http://support.apple.com/kb/ht1766

I used my bank card to get gold on a game for my boyfriend and now it won't let me download games to my iPod it keeps coming up billing info required what do I do?

I used my bank card to get gold on a game for my boyfriend and now it won't let me download games to my iPod it keeps coming up billing info required what do I do?

You need to add a valid payment method to the account. An iTunes gift card can be added.

If I want to download an app for me in the App Store, will be shown on the screen: "Error 1004 - Please try again later.''

If I want to download an app for me in the App Store, will be shown on the screen: ´´Error 1004 - Please try again later.´´

From the article cited at the end of my post:
Error 1004 and 1013: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to default on Windows. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
http://support.apple.com/kb/TS3694

Hey all , my apple ipad 16gb wifi only is showing a blue screen !! please help ! how do i fix this . what does it mean ? thanks in advance .

hey all , my apple ipad 16gb wifi only is showing a blue screen !! please help ! how do i fix this . what does it mean ? thanks in advance .

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

I am using iphone model MC603B is factory unlocked and updated os 5.0 when i use any carrier in it there always on screen no service please hlep me out .

I am using iphone model MC603B is factory unlocked and updated os 5.0 when i use any carrier in it there always on screen no service please hlep me out .

SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here.

Zen screen info required - Please he

Similar Messages

Maybe you are looking for