Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORK

:Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORKVHello!
I do possess this MP3 Player (with integrated speakers) for more than 2 years now and have never been using the Automatic Shutdown function of the player (in the menu settings). Yesterday, I went to bed, wanted to listen to some music and tried out this function the first time, but it did not work. I tried it with 5, 0 and 30 minutes. What am I doing wrong or is this setting just a joke?
I am using the current software/firmware and am not a newbie to technical instruments so I do know how to - theoretically - start this function by going to setting - Automatic Shutdown - scrolling to the minutes I want to have - Enter/Confirm with the middle ball-knob at the front of the player.
Maybe some of you might help me, I would highly appreciate that.
Kind regards
Guyfromgermany

Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

Similar Messages

Zen Stone Plus 4GB - Hiccups / Skipping with new firmware 1.01

I upgraded my recently purchased Zen Stone Plus 4GB to the new .0.05 firmware a few days ago. Ever since, most (if not all) tracks will play for ~ second, then skip back to the beginning and play fine thereafter. The problem will recur when the next track begins, either naturally on its own or if I jump tracks. I did not notice this problem with the prior firmware .0.03 (which had some EQ issues for me--EQ adjustments weren't audible while being performed, only after applied as a whole), but have not been able to downgrade back. More than once, I have tried reformatting (as FAT). I have reinstalled the .0.05 firmware (including in recovery mode). I have tried turning cue/review on and off. Nothing solves the hiccup / skipping?problem. Again, nothing will let me downgrade back to the older firmware, either. Has anyone else noticed this with the .0.05 firmware? I know several people have reported date bugs already (which I noticed too), so I'm hoping it's just Creative still getting firmware kinks ironed out. I'm a?little worried that it appears the player is no longer for sale anywhere, despite being a brand new "release." Most of my mp3's are a high quality variable bit rate, just in case that might be impacting something.

Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

Firmware zen stone plus 4GB with spea

in the dropdown list when looking for the latest version of the firmware for my "zen stone plus 4GB with speaker" i just can found the "zen stone plus 4GB"..
this mean that there are no available updates for my device, or that the model with built-in speaker use the same firmware of the one without speaker?
Thanks for help!

Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

Zen Stone Plus 4gb

I was at the Download Page and I found that there is a Zen Stone Plus 4gb isn't there. I was wondering if this is a error or a 4gb Zen Stone Plus is planned. It will definitely be something I might consider.
http://www.4freeimagehost.com/show.p...6fbd232b65.jpg
Could someone confirm ?
Thanks.

Hi,
If you have windows XP or Vista go to Windows explorer. The stone plus should show up as removable dri've. Right click on it and click properties, it will show how much space there is left.
If there's still space left, you can always use Windows Media Player (WMP)?to rip your CDs into mp3s and put them on your player afterwards.
In WMP go to tools - options - rip music and change your settings to mp3. I think by default it will save your music in the My Documents/My music folder. So that's where you can find it back when it's done.
If you can't find the tools- options menu just click on rip in WMP and hope for the best. If all the setting are still on default it should work.
After it's done you can either drag and drop in windows explorer or if the creative software isn't giving you any further troubles you can use that to put the music on your player. Make sure to close WMP after?you've done ripping?or it will interfere with the creative software.
Good luck,
jolie

Help! My Zen Stone Plus 4GB working problems!

My Zen Stone Plus 4GB worked fine a few minutes ago, but if I now turn it on, it'll freeze to Zen Stone Plus 4GB logo. I can't go to menu, use buttons or turn it off a normal way! Just if I press reset button, then it'll turn off. But it's same froze thing everytime I turn it on!
Second bad thing is, that my computer doesn't recognize the player anymore. It just turns it on, but it'll stay in the same logo.
I tried Creavite's support things, no help at all.
And Recovery Tool and Firmware didn't work, because they don't recognize it.
Please, help

kindly format your player in windows xp and scan it with avast antivirus software....... update the firmware after formatting...

Zen Stone Plus 4GB - Problems with Sp

Hi, I have a new Zen Stone Plus Player.
According to the Creative Audio CD Ripper, I have . GB of free space left, and yet it tells me there is no space when I try to rip a CD.
Let me stress, that I have not put my music files etc. in the root directory, they are all in a sub directory called Music.
Within that subfolder, there are 27 further sub-folders, containing 57 mp3 files between them. Thus, the FAQ is of no help to me.
Any help would be much appreciated.

Hi,
If you have windows XP or Vista go to Windows explorer. The stone plus should show up as removable dri've. Right click on it and click properties, it will show how much space there is left.
If there's still space left, you can always use Windows Media Player (WMP)?to rip your CDs into mp3s and put them on your player afterwards.
In WMP go to tools - options - rip music and change your settings to mp3. I think by default it will save your music in the My Documents/My music folder. So that's where you can find it back when it's done.
If you can't find the tools- options menu just click on rip in WMP and hope for the best. If all the setting are still on default it should work.
After it's done you can either drag and drop in windows explorer or if the creative software isn't giving you any further troubles you can use that to put the music on your player. Make sure to close WMP after?you've done ripping?or it will interfere with the creative software.
Good luck,
jolie

Switching browser using IE tab plus - the Norton Identity Safe does not work

Using Firefox 4.0.1 and Norton 360 5.1.0.29 - which has recently been "fixed" to work together (by Norton).
When using IE Tab Plus to switch rendering engines (Firefox to IE) the Norton Identity Safe does not work by not pre filling user names and passwords to sites that are registered in the Norton Safe and also for any new sites does not offer the option to add a new site to the Norton safe . . . . . is this a Norton or Firefox or IE Tab issue? And has anyone else had this problem?

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Automatic approval workflow does not work anymore

Hi,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
After changing the BUS objects 'automatic approval' workflow into the 1-step manager approval workflow it does work.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- We applied a new SP (SP07) not that long ago.
- These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Kind regards,
Tim

Hi Balaji,
In SRM 7.0,
Our automatic approval workflows configured via standard business configuration sets (process controlled) do not work anymore. They did work previously.
- The 'automatic approval' workflow does not seem to generate a workitem, the bbp_pd 'workflow' part is empty. In addition previously approved documents via 'automatic approval' do not contain workitem details via bbp_pd either anymore.
- - These documents go into status: 'awaiting approval', the documents 'approval' details tell us the following:
001 Automatic Approval Valid (Can be Started) Open (No Decision Made) SYSTEM system
However the system does not execute the task, how come? What normally ensures the system executes these 'automatic approval' tasks (report?)?
Any input is very much appreciated.
Regards,
Shears

Automatic shutdown command does not show warning message

I'm trying to automatically shutdown a computer remotely and I'm sending the following command:
shutdown -h +2 "Shutting down in 2 minutes."
I want users to be able to have a warning before the system shuts down.
The machine is shutting down, but my message is not popping up.

shutdown is a Unix shutdown command and it sends its shutdown message to terminal sessions. Are you users using the terminal?
Otherwise maybe you want to try getting help for an Applescript popup, or maybe using Growl which has a command line utility for generating growl messages on screen.

Installing application in shutdown script does not work

Hello,
I'm trying to organise the deployment of office 2013. I want to give users the choice between installation during startup and installation during shutdown of their computer.
Installation during startup works fine: installation starts and the user can use their computer and wait for the installation to finish in the background.
Installation initiated from a console window works fine as well.
However, installation using a shutdown script doesn't work as the installation command returns immediatly, the script ends and the computer shuts down.
I have changed the gpo script timeout setting.
In the powershell script, I execute the installation using "start-process" with the option "-wait". It seems like this command returns immediatly and the setup is never executed as it does not start logging the installation progress to
a local log file.
The shutdown script runs fine and it also logs its progress to a logfile on a network share so I'm sure the script actually runs and it has network access as well.
Any clues as to why the installation might fail during a shutdown script and work fine in other situations? Thanks!
I'm not sure if this is a gpo or an office 2013 deployment question. I'm thinking the environment during execution of a shutdown script might be different so that's why I'm asking my question here.

Hi,
Based on your description, we can also try asking for suggestions in the scripting forum to see if they can provide a better solution.
The Official Scripting Guys Forum
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

SQL Plus Bug/Question: 'COMPUTE' command does not work in script.(BUG?!)

Good Day to ALL!
I have a script of SQLPlus that creates a report. I have 8/9 numeric columns which are 'SUM'ed up thru 'COMPUTE' command. It works for all BUT 2 columns. If I put these two columns, compute does not take affect. If I remove these two columns ( just cut) 'COMPUTE' works fine!!! These two coulumns use DB Function. But I have other column that also use DB Function. These two columns has some extra additions. Any thing wrong with the script/column defn.
Thanks - Pradip (Pradip Biswas @Singapore) Could you pl. reply to [email protected]
Here is bit of script. Sorry about the length of the cut and paste.
COLUMN OPEN_QTY_BAL           FORMAT 9,99,990          HEADING 'Opening|Qty'           Justify LEFT
COLUMN OPEN_QTY_VALUE          FORMAT 99,999,990      HEADING 'Opening|S$'           Justify LEFT
COLUMN PO_RECEIPTS_QTY      FORMAT 99,990          HEADING 'PO Rec|QTY '          Justify LEFT
COLUMN PO_RECEIPTS_QTY_VALUE     FORMAT 9,999,990      Heading 'PO Rec|S$'           Justify LEFT
COLUMN MISC_RECEIPTS_QTY     Format 99,990          Heading 'Misc |Qty'          Justify LEFT
Column MISC_RECEIPTS_QTY_VALUE      Format 9,999,990      Heading 'Misc|S$'          Justify LEFT
COLUMN WORKORDER_QTY           FORMAT 99,990          HEADING 'WorkOrd|Qty'          Justify LEFT
COLUMN WorkOrder_QTY_VALUE      Format 9,999,990      HEADING 'WorkOrd|S$'          Justify LEFT
COLUMN SALES_SHIPMENT_QTY      FOrmat 99,990          Heading 'SalesShip|Qty'          Justify LEFT
COLUMN SALES_SHIPMENT_QTY_VALUE FOrmat 9,999,990      Heading 'SalesShip|S$'          Justify LEFT
COLUMN MISC_ISSUE_QTY     Format 99,999          HEADing 'Misc|Qty'          Justify LEFT
COLUMN MISC_ISSUE_QTY_VALUE Format 9,999,990 heading 'Misc|S$'          Justify LEFT
COLUMN TRANSFER_QTY          format 99,990          heading 'Transfer|Qty'          Justify LEFT
COLUMN TRANSFER_QTY_VALUE     format 99,999,990     heading 'Transfer|S$'          Justify LEFT
COLUMN REVAL_VALUE Format 99,990          Heading 'Reval|S$'          Justify LEFT
COLUMN ON_HAND_QTY           FORMAT 9,99,990      HEADING 'Closing|Qty'           Justify LEFT
COLUMN ON_HAND_QTY_VALUE     FORMAT 99,999,999,990      HEADING 'Closing|S$'           Justify LEFT
REPHEADER on
REPHEADER left ' GL Period From: &&P_GL_PERIOD_NAME_FROM ' skip left ' GL Period To : &&P_GL_PERIOD_NAME_TO ' skip left ' Inv Org Code : &&P_INV_ORG_CODE ' skip left 'SubInventory Code : &&P_SUBINVENTORY_CODE ' skip 2
TTITLE left 'H - Inv Inventory Movement Report as at:' TTITLE_DATE RIGHT 'PAGE:' FORMAT 999 SQL.PNO SKIP 2
BTITLE skip 1 CENTER 'COMPANY CONFIDENTIAL - Printed on ' TTITLE_DATE
BREAK on REPORT skip 1;
--rem(1) compute SUM label 'Total' of OPEN_QTY_VALUE PO_RECEIPTS_QTY_VALUE MISC_RECEIPTS_QTY_VALUE WorkOrder_QTY_VALUE SALES_SHIPMENT_QTY_VALUE MISC_ISSUE_QTY_VALUE TRANSFER_QTY_VALUE REVAL_VALUE on report;
--REM(2) compute SUM label 'Total $S: ' of OPEN_QTY_VALUE REVAL_VALUE on report;
--REM(3) compute SUM label 'Total $S: ' of OPEN_QTY_VALUE REVAL_VALUE ON_HAND_QTY_VALUE on report;
compute SUM label 'Total $S:' of OPEN_QTY_VALUE PO_RECEIPTS_QTY_VALUE MISC_RECEIPTS_QTY_VALUE WorkOrder_QTY_VALUE SALES_SHIPMENT_QTY_VALUE MISC_ISSUE_QTY_VALUE TRANSFER_QTY_VALUE REVAL_VALUE on report;
WHENEVER SQLERROR EXIT FAILURE
select
--     MSI.ORGANIZATION_ID                          ORGANIZATION_ID,
-- MSI.INVENTORY_ITEM_ID                                   INVENTORY_ITEM_ID,
     MSI.SEGMENT1||'//'||MSI.DESCRIPTION                                   ITEM,
-- MSI.DESCRIPTION                                             DESCRIPTION,
All_Item_subinv.SUBINVENTORY_CODE                              SUBINVENTORY,
MSIV.PRIMARY_UOM_CODE                                        UOM,
     --NVL(MOQ_OPen_BAL.OPEN_QTY_BAL ,0)                               OPEN_QTY_BAL ,
-- NVL(MOQ_OPen_BAL.OPEN_QTY_BAL,0) * NVL(AVG_ITEM_COST1.ITEM_COST,0)           OPEN_QTY_VALUE,
(MOQ_OPen_BAL( All_Item_subinv.SUBINVENTORY_CODE,
          MSI.ORGANIZATION_ID,
MSI.INVENTORY_ITEM_ID,
'&P_GL_PERIOD_NAME_FROM') )     OPEN_QTY_BAL ,
(MOQ_OPen_BAL_VAL( All_Item_subinv.SUBINVENTORY_CODE,
          mSI.ORGANIZATION_ID,
MSI.INVENTORY_ITEM_ID,
'&P_GL_PERIOD_NAME_FROM')
     )                                             OPEN_QTY_VALUE,
NVL(AGGREGATED_MTT.PO_RECEIPTS_QTY,0)                              PO_RECEIPTS_QTY,
     NVL(AGGREGATED_MTT.PO_RECEIPTS_QTY_VALUE,0)                          PO_RECEIPTS_QTY_VALUE,
     NVL(AGGREGATED_MTT.MISC_RECEIPTS_QTY,0)                              MISC_RECEIPTS_QTY,
     NVL(AGGREGATED_MTT.MISC_RECEIPTS_QTY_VALUE,0)                          MISC_RECEIPTS_QTY_VALUE,
     NVL(AGGREGATED_MTT.WORKORDER_QTY,0)                              WORKORDER_QTY,
     NVL(AGGREGATED_MTT.WorkOrder_QTY_VALUE,0)                          WorkOrder_QTY_VALUE,
NVL(AGGREGATED_MTT.SALES_SHIPMENT_QTY,0)                         SALES_SHIPMENT_QTY,
     NVL(AGGREGATED_MTT.SALES_SHIPMENT_QTY_VALUE,0)                         SALES_SHIPMENT_QTY_VALUE,
     NVL(AGGREGATED_MTT.MISC_ISSUE_QTY,0)                              MISC_ISSUE_QTY,
     NVL(AGGREGATED_MTT.MISC_ISSUE_QTY_VALUE,0)                          MISC_ISSUE_QTY_VALUE,
     NVL(AGGREGATED_MTT.TRANSFER_QTY,0)                              TRANSFER_QTY,
     NVL(AGGREGATED_MTT.TRANSFER_QTY_VALUE,0)                         TRANSFER_QTY_VALUE,
     NVL(AGGREGATED_MTT.REVAL_VALUE,0)                              REVAL_VALUE,
          (MOQ_OPen_BAL(All_Item_subinv.SUBINVENTORY_CODE,
          MSI.ORGANIZATION_ID,
MSI.INVENTORY_ITEM_ID,
'&P_GL_PERIOD_NAME_FROM')
          +
          nvl(AGGREGATED_MTT.PO_RECEIPTS_QTY,0)      +
          nvl(AGGREGATED_MTT.MISC_RECEIPTS_QTY,0)     +
          nvl(AGGREGATED_MTT.WORKORDER_QTY,0)     +
          nvl(AGGREGATED_MTT.SALES_SHIPMENT_QTY,0)     +
          nvl(AGGREGATED_MTT.MISC_ISSUE_QTY,0)          +
          nvl(AGGREGATED_MTT.TRANSFER_QTY,0)     )                ON_HAND_QTY,
((MOQ_OPen_BAL_VAL( All_Item_subinv.SUBINVENTORY_CODE,MSI.ORGANIZATION_ID,MSI.INVENTORY_ITEM_ID,'&P_GL_PERIOD_NAME_FROM'))
+(nvl( AGGREGATED_MTT.PO_RECEIPTS_QTY_VALUE,0) )
+(nvl( AGGREGATED_MTT.MISC_RECEIPTS_QTY_VALUE,0) )
+(nvl( AGGREGATED_MTT.WorkOrder_QTY_VALUE,0) )
+(nvl( AGGREGATED_MTT.sALES_SHIPMENT_QTY_VALUE,0) )
+(nvl( AGGREGATED_MTT.MISC_ISSUE_QTY_VALUE,0) )
+(nvl( AGGREGATED_MTT.TRANSFER_QTY_VALUE,0) )
+nvl( AGGREGATED_MTT.REVAL_VALUE,0))                               ON_HAND_QTY_VALUE -- column alias
FROM
-- In line View for MSI
(select distinct MMT.ORGANIZATION_ID, MMT.INVENTORY_ITEM_ID, MMT.SUBINVENTORY_CODE
From MTL_MATERIAL_TRANSACTIONS      MMT,
ORG_ORGANIZATION_DEFINITIONS      OOD,
MTL_ONHAND_QUANTITIES moq
where
     OOD.organization_code           = '&P_INV_ORG_CODE' --'HS' --'&P_INV_ORG_CODE'
AND OOD.inventory_enabled_flag = 'Y'
AND OOD.operating_unit          = fnd_profile.value('ORG_ID') --83 --fnd_profile.value('ORG_ID')
AND OOD.SET_OF_BOOKS_ID          = fnd_profile.value('GL_SET_OF_BKS_ID') --1 --fnd_profile.value('GL_SET_OF_BKS_ID')
AND     MMT.ORGANIZATION_ID          = OOD.organization_id
AND MMT.SUBINVENTORY_CODE          = NVL('&P_SUBINVENTORY_CODE', MMT.SUBINVENTORY_CODE)
and MMT.ORGANIZATION_ID      = MOQ.ORGANIZATION_ID -- to eliminate consigend items:2007Jan04:PKB
and MMT.INVENTORY_ITEM_ID = MOQ.INVENTORY_ITEM_ID --,,
and MMT.SUBINVENTORY_CODE = MOQ.SUBINVENTORY_CODE --,,
UNION
Select distinct      MOQ.ORGANIZATION_ID,      MOQ.INVENTORY_ITEM_ID,     MOQ.SUBINVENTORY_CODE
from      MTL_ONHAND_QUANTITIES                MOQ,
     ORG_ORGANIZATION_DEFINITIONS           OOD2
WHERE
     OOD2.organization_code           = '&P_INV_ORG_CODE' --'HS' --'&P_INV_ORG_CODE'
AND OOD2.inventory_enabled_flag      = 'Y'
AND OOD2.operating_unit          = fnd_profile.value('ORG_ID') --83 --fnd_profile.value('ORG_ID')
AND OOD2.SET_OF_BOOKS_ID          = fnd_profile.value('GL_SET_OF_BKS_ID') --1 --fnd_profile.value('GL_SET_OF_BKS_ID')
AND moq.ORGANIZATION_ID          = OOD2.organization_id
AND moq.SUBINVENTORY_CODE          = NVL('&P_SUBINVENTORY_CODE', moq.SUBINVENTORY_CODE)
) ALL_Item_SUBInv,
MTL_SYSTEM_ITEMS_B MSI,
Mtl_System_Items_Vl MSIV,
(SELECT
     MMT.ORGANIZATION_ID ORGANIZATION_ID,
MMT.INVENTORY_ITEM_ID          INVENTORY_ITEM_ID,
MMT.SUBINVENTORY_CODE          SUBINVENTORY_CODE,
-- PO RECEIPTS.
SUM(CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Purchase order')
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('PO Receipt','PO Rcpt Adjust','Return to Vendor')
THEN
               --MMT.TRANSACTION_QUANTITY
               mmt.primary_quantity
ELSE 0
END
ELSE 0
END ) PO_RECEIPTS_QTY,
SUM(CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Purchase order')
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('PO Receipt','PO Rcpt Adjust','Return to Vendor')
THEN
               NVL(MMT.ACTUAL_COST,0)* nvl(mmt.primary_quantity,0)
               MMT.TRANSACTION_COST * NVL(AVG_ITEM_COST.ITEM_COST,0)
ELSE 0
END
ELSE 0
END ) PO_RECEIPTS_QTY_VALUE,
-- MISC RECEIPTS.
SUM( CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Account','Inventory')
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('Account receipt','Miscellaneous receipt')
THEN
               --MMT.TRANSACTION_QUANTITY
               mmt.primary_quantity
ELSE 0
END
ELSE 0
END ) MISC_RECEIPTS_QTY,
SUM(CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Account', 'Inventory')
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('Account receipt','Miscellaneous receipt')
THEN
               NVL(MMT.ACTUAL_COST,0) * nvl(mmt.primary_quantity,0)
                    MMT.TRANSACTION_COST NVL(AVG_ITEM_COST.ITEM_COST,0)
ELSE 0
END
ELSE 0
END ) MISC_RECEIPTS_QTY_VALUE,
-- WorkOrder Qty and S$
SUM( CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Job or Schedule')
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('WIP Assembly Return','WIP Assy Completion','WIP component issue','WIP Component Return')
THEN
               --MMT.TRANSACTION_QUANTITY
               mmt.primary_quantity
ELSE 0
END
ELSE 0
END ) WORKORDER_QTY,
SUM(CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Job or Schedule')
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('WIP Assembly Return','WIP Assy Completion','WIP component issue','WIP Component Return')
THEN
               NVL(MMT.ACTUAL_COST,0) * nvl(mmt.primary_quantity,0)
                    MMT.TRANSACTION_COST NVL(AVG_ITEM_COST.ITEM_COST,0)
ELSE 0
END
ELSE 0
END ) WorkOrder_QTY_VALUE,
-- Sales Shipment
SUM(CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
( 'Sales order','RMA')
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('Sales order issue','Sales Order Pick','RMA Return','RMA Receipt')
THEN
               --MMT.TRANSACTION_QUANTITY
               mmt.primary_quantity
ELSE 0
END
ELSE 0
END ) SALES_SHIPMENT_QTY,
SUM(CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
( 'Sales order','RMA')
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('Sales order issue','Sales Order Pick','RMA Return','RMA Receipt')
THEN
               NVL(MMT.ACTUAL_COST,0) * nvl(mmt.primary_quantity,0)
               MMT.TRANSACTION_COST NVL(AVG_ITEM_COST.ITEM_COST,0)
ELSE 0
END
ELSE 0
END ) SALES_SHIPMENT_QTY_VALUE,
-- MISC ISSUE
SUM(CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Inventory','Account' )
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('Miscellaneous issue','Account issue')
THEN
               --MMT.TRANSACTION_QUANTITY
               mmt.primary_quantity
ELSE 0
END
ELSE 0
END ) MISC_ISSUE_QTY,
SUM(CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
('Inventory','Account' )
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('Miscellaneous issue','Account issue')
THEN
               NVL(MMT.ACTUAL_COST,0) * nvl(mmt.primary_quantity,0)
               MMT.TRANSACTION_COST NVL(AVG_ITEM_COST.ITEM_COST,0)
ELSE 0
END
ELSE 0
END ) MISC_ISSUE_QTY_VALUE,
-- Transfers
SUM( CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
( 'Inventory' )
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('Subinventory Transfer')
THEN
               --MMT.TRANSACTION_QUANTITY
               mmt.primary_quantity
ELSE 0
END
ELSE 0
END ) TRANSFER_QTY,
SUM( CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
( 'Inventory')
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('Subinventory Transfer')
THEN      NVL(MMT.ACTUAL_COST,0) * nvl(mmt.primary_quantity,0)
               MMT.TRANSACTION_COST NVL(AVG_ITEM_COST.ITEM_COST,0)
ELSE 0
END
ELSE 0
END ) TRANSFER_QTY_VALUE,
-- Adjustment to Cost (Revaluation)
SUM(CASE
     WHEN MTST.TRANSACTION_SOURCE_TYPE_NAME in
( 'Standard cost update','Job or Schedule')
     THEN
          CASE
          WHEN MTT.TRANSACTION_TYPE_NAME in
('Standard cost update','WIP cost update')
THEN
               --2007JAN03:PKB MMT.TRANSACTION_COST
MMT.TRANSACTION_COST* MMT.QUANTITY_ADJUSTED
ELSE 0
END
ELSE 0
END ) REVAL_VALUE
     FROM
     MTL_MATERIAL_TRANSACTIONS                MMT,
     --GL_PERIODS                          GP,
     MTL_TRANSACTION_TYPES                MTT,
     MTL_TXN_SOURCE_TYPES                    MTST,
ORG_ORGANIZATION_DEFINITIONS                OOD
WHERE
OOD.organization_code           = '&P_INV_ORG_CODE' --'HS' --'&P_INV_ORG_CODE'
AND OOD.inventory_enabled_flag = 'Y'
AND OOD.operating_unit          = fnd_profile.value('ORG_ID') --83 --fnd_profile.value('ORG_ID')
AND OOD.SET_OF_BOOKS_ID          = fnd_profile.value('GL_SET_OF_BKS_ID') --1 --fnd_profile.value('GL_SET_OF_BKS_ID')
AND     MMT.ORGANIZATION_ID          = OOD.organization_id
AND MMT.SUBINVENTORY_CODE          = NVL('&P_SUBINVENTORY_CODE', MMT.SUBINVENTORY_CODE)
-- AND GP.PERIOD_SET_NAME          = 'HF-ACCTG-CAL' -- Hardcoded PKB
AND
     (     (EXISTS
     ( select GP.Period_name
FROM GL_PERIODS GP
where TO_DATE(TO_CHAR(MMT.TRANSACTION_DATE,'DD-MM-YYYY'),'DD-MM-YYYY')
               >= TO_DATE(TO_CHAR(GP.START_DATE,'DD-MM-YYYY'),'DD-MM-YYYY') --Between GP.START_DATE and GP.END_DATE
     AND GP.PERIOD_NAME      = '&P_GL_PERIOD_NAME_FROM'
          and GP.PERIOD_SET_NAME          = 'HF-ACCTG-CAL'
AND NVL('&P_GL_PERIOD_NAME_FROM','ALL')      != 'ALL'
OR (NVL('&P_GL_PERIOD_NAME_FROM' ,'ALL')               = 'ALL')
AND
     (     (EXISTS
     ( select GP.Period_name
FROM GL_PERIODS GP
where TO_DATE(TO_CHAR(MMT.TRANSACTION_DATE,'DD-MM-YYYY'),'DD-MM-YYYY')
               <= TO_DATE(TO_CHAR(GP.END_DATE,'DD-MM-YYYY'),'DD-MM-YYYY')
     AND GP.PERIOD_NAME      = '&P_GL_PERIOD_NAME_TO'
          and GP.PERIOD_SET_NAME          = 'HF-ACCTG-CAL'
AND NVL('&P_GL_PERIOD_NAME_TO','ALL')      != 'ALL'
OR (NVL('&P_GL_PERIOD_NAME_TO','ALL')               = 'ALL')
AND MMT.TRANSACTION_TYPE_ID          = MTT.TRANSACTION_TYPE_ID
AND MMT.TRANSACTION_SOURCE_TYPE_ID          = MTST.TRANSACTION_SOURCE_TYPE_ID
group by
     MMT.ORGANIZATION_ID,
MMT.INVENTORY_ITEM_ID,
MMT.SUBINVENTORY_CODE
)                    AGGREGATED_MTT,
-- Inline Table for AVG_ITEM_COSTs 2nd time,
(SELECT
     CIC.ORGANIZATION_ID     ORGANIZATION_ID,
CIC.INVENTORY_ITEM_ID INVENTORY_ITEM_ID,
CIC.COST_TYPE_ID COST_TYPE_ID,
CCT.COST_TYPE     COST_TYPE,
NVL(CIC.ITEM_COST ,0) ITEM_COST
FROM
     CST_ITEM_COSTS           CIC,
     CST_COST_TYPES           ccT,
ORG_ORGANIZATION_DEFINITIONS                OOD1
WHERE
     CCT.COST_TYPE_ID           = CIC.COST_TYPE_ID
     /*AND (
     (CCT.COST_TYPE          = 'Average' and '&P_INV_ORG_CODE' = 'HS')
          OR
(CCT.COST_TYPE          = 'Frozen' and '&P_INV_ORG_CODE' = 'HL')
AND CCT.COST_TYPE_ID =
          ( select      m.primary_cost_method
          from      mtl_parameters m
where      m.organization_id      = OOD1.ORGANIZATION_ID
     and OOD1.organization_code      = '&P_INV_ORG_CODE' --'HS' --'&P_INV_ORG_CODE'
     AND OOD1.inventory_enabled_flag = 'Y'
     AND OOD1.operating_unit          = fnd_profile.value('ORG_ID') 83 --fnd_profile.value('ORG_ID')
     AND OOD1.SET_OF_BOOKS_ID     = fnd_profile.value('GL_SET_OF_BKS_ID') 1 --fnd_profile.value('GL_SET_OF_BKS_ID')
     AND cic.ORGANIZATION_ID          = OOD1.organization_id
     )                               AVG_ITEM_COST1
WHERE
AGGREGATED_MTT.ORGANIZATION_ID(+)          = All_Item_subinv.ORGANIZATION_ID
AND AGGREGATED_MTT.INVENTORY_ITEM_ID(+) = All_Item_subinv.INVENTORY_ITEM_ID
AND AGGREGATED_MTT.subinventory_code(+)     = All_Item_subinv.subinventory_code
AND All_Item_subinv.ORGANIZATION_ID          = MSI.ORGANIZATION_ID
AND ALL_Item_SUBInv.INVENTORY_ITEM_ID          = MSI.INVENTORY_ITEM_ID
AND AVG_ITEM_COST1.ORGANIZATION_ID(+)     = MSI.ORGANIZATION_ID
AND AVG_ITEM_COST1.INVENTORY_ITEM_ID(+)      = MSI.INVENTORY_ITEM_ID
and msi.ROWID                         = MSIV.ROW_ID
and msi.ORGANIZATION_ID                    = fnd_profile.value('ORG_ID') --83 --fnd_profile.value('ORG_ID')
and sysdate between NVL(msi.start_date_active,sysdate -1 )
and NVL(msi.end_date_active,sysdate+1)
Order BY
     MSI.SEGMENT1,
MSI.DESCRIPTION     ,
All_Item_subinv.SUBINVENTORY_CODE
/

Hi Barry and All: This indeed is a bug in SQLPLUS ! Version 9.2.0.1.0 as well.
Thanks for asking the version no of SQLLPLUs. I was working thru Oracle Apps 11i.10 (concurrent program). So I did not get any message from SQLPLUS.
I tested independently in SQLPLUS and got the message! Thanks Oracle!!!
The Bug is in the name of COLUMN NAME or ALIAS Name. I renamed the columns from ON_HAND_QTY and ON_HAND_VALUE to CLOSE_QTY and CLOSE_QTY_VALUE. It worked!! The string 'ON' in the column/alias name is taken as 'ON' keyword/clause for 'compute' statement for SQLPLUS.
Here is the message from SQLPLUS
" SP2-0084: COMPUTE ON keyword specified already"
See these two line and compare
--compute SUM label 'Total $S: ' of SALARY ON_SALARY on report;
compute SUM label 'Total $S: ' of SALARY on report;
Thanks - Pradip
Here is the sample code to simulate. (not Big :))
WHENEVER SQLERROR EXIT FAILURE
CLEAR computes
CLEAR BREAKS
clear column
TTITLE OFF
BTITLE OFF
set verify off
set feedback off
set echo off
set heading off
set termout off
set linesize 203
set pagesize 30
set termout on
SET UNDERLINE =
set heading on
COLUMN SALARY               FORMAT 9,999,990      Heading 'SALARY'
COLUMN ON_SALARY          format 9,999,990 Heading 'ON Salary'
column ENAME format a20 heading 'NAME'
COLUMN EMPNO Format 99999 HEADING 'EMPNO'
BREAK on REPORT skip 3;
--compute SUM label 'Total $S: ' of SALARY ON_SALARY on report;
compute SUM label 'Total $S: ' of SALARY on report;
WHENEVER SQLERROR EXIT FAILURE
select empno, ename, sal SALARY, sal ON_SALARY from scott.emp;

Automatic text comparison does not work from child to Master in CUA

Hi,
When trying to transfer role specifications to CUA master from our child system the application log is displaying as seen in slg1.png.
On our master system we are running 7.31 SP7 which is fine according to Note 1642106.
Our client system is 7.31 sp5 and there for we went to note 1141736 and installed note 1580217 as the other three notes is not compatible with our system.
we have also implemented the switch "CUA_AUTO_TXTCMP_ROLE" with YES in table USR_CUST on both systems.
The "error" does not go away and the "synchronization" does not seem to be activated between the systems.

Hi,
This is a list of many Routing Modems and routers
http://portforward.com/routers.htm
AS you will see the Netgear section is quite long.
Of those that are Wireless most will be G type devices.
I am not saying DO the Port Forwarding.
If you click on your Model and then Dismiss the Advert in the next page > Then Choose iChat in the Next List you will be told the Default Access info
Most likely this will be 192.168.0.1 and admin and password as the Default Info.
Once in the Set up pages you need to Check the menu on the left for UPnP and make sure it is Enabled (No Need for Port Forwarding then).
In the WAN Page you need to Disable DOS (Or SPI) and Allow Response to Internet Pings on the WAN port.
The 4500 was a typo, sorry about that. Should have read 500kbps
On Adding Buddies.
Apple Names (@Mac.com and @me.com) and AIM ones need to be added to an AIM Buddy list.
By that I mean one that Logs into AIM.
If you have a @mac.com name then you should have selected the @mac.com option when choosing the Account type.
See the Drop down item in the middle of this Start Up Screen
From http://www.ralphjohns.co.uk/versions/ichatvers4/howtoStartiChat.html
Similarly you need to chose the account type the Buddy is as well.
More info with pics
So adding the Apple Test accounts requires that you type the same info as the iChat Software adds the @mac.com when you chose to add an @mac.com Buddy
Sample of middle Drop down in Add Buddy but set to @me.com instead
If you have a Jabber ID (And GoogleMail names work as GoogleTalk IDs and they are Jabber as well) you can add Jabber Buddies as well.
There is a way with some Jabber Servers to Add the ability to Text chat to MSN and Yahoo Buddies.
7:51 PM Monday; May 11, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Zen stone plus 4gb randomly disabling

When playing songs for some time,eq?gets disabled,but on display shows as enabled.Player forgets the selected eq.Where is the problem? I tried to reset player,and to format,but no sucess.

Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

ZEN Stone Plus 4GB is terrible, I throw mine a

I bought one, but it has problem charging its battery to the full. I use my PC usb port to charge it. Everytime it will charge up to just 0% of the battery and the led status indicate it is full and the player becomes very hot.
I sent it for repair twice and the staffs said it is not faulty. They suggest I should may creative charger, because using PC usb port is the fault. What is this? You state in your manual and package that I can charge with PC usb port, now you want me to spend another $30 for the charger?

Hi JLM, am running .0.05e fine and in fact listening to it at the moment. Is there anyway you can regress back to .0.03 to test your theory? Testing a bunch of 28k CBR MP3s is an easy thing to try also.Message Edited by BlueRobin on 0-02-200802:49 PM

Shutdown command does not work on my Solaris 9 machine

When I tried to reboot my machine with command /usr/sbin/shutdown -i6 -g0 -y, the system did not reboot. And I used command /usr/ucb/shutdown -r now, the system went down then I got
message "File system / being checked" when system tried to come up,
I had to run fsck manually. Would anyone know how to fix it without running fsck manually when system reboots itself?
Thanks.
G Fix

Dude!
You should never run shutdown -r unless you are ready to dive into fires and come out before you can burn.
Always shutdown any services and applications. Look for rougue processes and kill them. Then try the shutdown. use the -r option only when you are confident that you won't need to post for help in the forums.

Zen Stone Plus 4GB - Automatic Shutdown - IT DOES NOT WORK

Similar Messages

Maybe you are looking for