Zero Tax Codes TDS Cdertificate

As per legal requirement with PAN we dont want to calculate TDS, but it will show in the certificate.
I created one tax code with 0 %
How we will get values in the certificate.
Regards Venkat

Hi
Regarding EWT Tax Types and codes.There is a step Activate Extended Withholding Tax, DESELECT the extended withholding tax checkbox. then these tax types and codes will not get displayed.ie they in HIDE mode.
Regards
Venkat
Edited by: Venkat Dara on Jan 6, 2009 9:05 AM
Edited by: Venkat Dara on Jan 6, 2009 9:44 AM

Similar Messages

Blocking of FTXP - tax codes & TDS tax codes

Hi viewers,
my client is being with SAP from last 7 yrs. Every year we used to create new Tax codes..... so now it became a big list. my client wants to block all the previous years tax codes.( i.e it should not appear in FTXP) & also TDS tax codes...... so pls let me know is there any process to block.
Rgds,
Swathi

Hi
Regarding EWT Tax Types and codes.There is a step Activate Extended Withholding Tax, DESELECT the extended withholding tax checkbox. then these tax types and codes will not get displayed.ie they in HIDE mode.
Regards
Venkat
Edited by: Venkat Dara on Jan 6, 2009 9:05 AM
Edited by: Venkat Dara on Jan 6, 2009 9:44 AM

Zero tax code

Hi gurus,
I have a old PO which was created with V0 tax code with no duties,
I am in Taxinj
But when I displaly the GR document I found Excise tab and excise duties which were not is V) tax code.
How it was happened
Was it happened through manual entry in MIGO?
Could some one clarify
Thanks in advance.

Hi,
We cant change the tax code in MIGO. We can change the base value and tax % in MIGO.
In PO you can find which user changed the PO and wht changes he made by clicking header and item details in Purchase order.
reg
Durga
*assign points if the info is useful

"Tax code V0 country IN does not exist in procedure TAXINN"

I am following , following sequence for import purchases :
1. PO on bond plant ( tax tab at inovice tab in PO : V0 )
2. Following conditions are planned delivery costs :
JCDB / JCV1 / JECV / ZEBC --> these condition values are entered manually
at PO.
3. When I am trying to enter invoice for Planned delivery costs at MIRO ,
the error appears : "Tax code V0 country IN does not exist in procedure TAXINN"
V0 ( V-ZERO) Tax Code is maintained has
been assigned to company code. This tax code works fine for local purchase , why
the system is not allowing it for import purchase ? I even tried to remove it from
Info record and OMR2 and OBCL , however no effect ? I am using TAXINN . Can anybody
advise ?

Check whether condition table 003 i.e. Tax classification is there in your access sequence for your condition type JMOP or not?
If not then maintain/create the same in Acees sequence of JMOP.
Now in FV11, select condition JMOP, key combination should be 'Tax Classification' only.
Maintain Country 'IN', assign tax code V0 to V0.
Regards,
Piyush

Dummy TAX CODE

while working with TAXINN
In MM (which works on Tax procedur TAXINN) while creating condition record for excise duty in FV11 we maintain tax code in record.
In SD , ( which works on SD Pricing procedure),while creating condition record for exice duty in VK11 we dont maintain tax code in record .
whereas while creating condition record for LST & CST in SD we maintain tax code for Taxes.
why in MM we use TAX CODE not in SD for EXcise duty? what is purpose behind it ?
or pl could anyone tale me significance of dummy TAX CODE code in TAXINN   MM.
if i dont put dummy tax in FV11 condition record & remove that field.
where will i stuck up?

Hi ,
Pl. refer the Below thread of OSS Note ::952289.
3. At the time of invoice verification in MIRO, when 'Tax' tab is clicked, there is a dump.
Answer: The tax procedure TAXINN is a condition based tax procedure and hence the tax code does not play a role in the tax calculation. None of the tax conditions are active in the tax code which is entered in MIRO to calculate tax. Hence, when you click on the 'Tax' tab in MIRO, it searches for active tax conditions in the tax code. Since it doesn't find any, it dumps.
In order to resolve the issue of the dump faced in MIRO, the following has to be done->
           1. Create a dummy condition type. (Can copy the JMOQ condition type and create the same). Assign the access sequence 'MWST' to this new condition type.
           2. Maintain a dummy condition record for the access sequence MWST for the tax code being used. (Maintain the TaxCl1Cust, TaxCl.Mat and Amount field as 0 for this dummy record)
           3. Assign this condition type to the tax procedure TAXINN (like JMOQ)
           4. Through FTXP, activate the line for the new condition type. (enter the tax percentage rate as 0)
           5. Now run the transaction MIRO.
This will resolve the dump in the transaction MIRO.
4. For direct posting to FI through the transaction FB60/ FB70, the tax calculation is not taking place.
Answer: Ensure that the following steps are carried out -
1. Insert the condition table 003 in the access sequence JTAX one above
the last step. DO NOT MARK IT AS EXCLUSIVE.
2. Create new set of TAX codes to be used in FI only.
3. Maintain condition records for these tax code using the table 003,
through FV11 with the appropriate tax percentage.
5. System does not allow posting of small differences (positive or negative) in invoice verification (MIRO), even though it is within the tolerance limits. Error message no. FF704, "Tax code in procedure TAXINN is invalid", is displayed in MIRO.
Answer: Set the tax code 00 in "Assign tax code to company code",maintain Condition records with Tax Classification combination for zero tax code.
Biswajit

Sales Tax code mandatory in Material Master

Hi,
I am into developement and trying to create a material.In the Sales View1 tab it shows me 2 entries under Tax data.
One entry for DE and other entry for the country I am working for.
All the sttings seems to be similar vis a vis Sandbox where I could see only one entry.
What could be the reason.I don't want to have DE entry for tax there.
Also, I have to enter the tax code there.I am using zero tax(v0) and it asks me to put it there everytime.
How to make it optional.I do not remember how it was done in Sandbox as it does not stop me there.
It's urgent.Please suggest.
Thx in advance
Regards,
manOO

Hi Steve,
thx for that.I have created one procedure for my country and have assigned it to country coe.I have done all the settings similar to Sandbox.I have created zero tax code since there is no tax involve for some reasons but i guess even there is no yax one has to create this calculation procedure and assign it to country code and then subsequently via FTXP create tax code for zero tax and then use it when required(for example at the time of invoice)
what I did not understand as asked earlier is that why system is showing me 2 tax codes DE and AE in sales 1 view ?and why it is showing me mandatory entry.
Showing up of 2 entries is okay but then I have to enter zero tax in both the lines.That is why i asked how can I make it optional.
Is there any way ?
I tries to search in the material master field status... but the group 190 where i could see this tax cose field is already optional.
What could be issing here ??
Thanks in advance
regards,
manOO

F-05 - Tax code required

Dear all,
I am trying to clear foreighn exchange differences through F-05 for account called Vat on Imports. When creating accounting for VAT on imports i have selected Input tax account in tax catagory and also selected "post without tax allowed".
But when i am trying to clear this vat on imports accounts through F-05 system is asking me to enter tax code.
Can somebody tell me how to resolve this?
Thanks in advance.
Prasad

Hi,
I am also tried with zero tax code, system throws an error message that, tax entry not possible in this line item.
awaiting for your suggestions.
regards
prasad

V0 tax code

hi friends.
do we have to maintain condition records for V0 tax code(zero tax code).
why...
thanks in advance...

yes, to enable SAP to find such condition.
Without, SAP cannot pull this information and you may get the error that the pricing is incomplete.
However, in purchasing the tax is not important if it is a deductable tax, we dont maintain any tax in a purchasing document. This way we got less errors when posting invoice.
If you havent given any tax code in the PO, then the accountant can enter whatever is required when he does invoice verification. And the accountant should be the person who has the best knowledge in this area.
If you specify a code in the PO, then the accountant may not be able change this when doing LIV, then he has to request a change in the PO before he can proceed.

Tax codes for capturing excise duty

dear all,
how to create taxcode for capturing excise duties and where to link them for capture of excise invoice.
thanx in advance.
velu

Hi Velu
use T-code FTXP to create ur tax code. If u r using TAXINJu will maintain % while creating tax code, or if u r using TAXINN u will maintain zero tax.and save it.
this zero tax code you will use when u maintain tax records- tcode:FV11
Assign the tax code for the country.
Assign ur TAXINN to the country.
Create a record for the matl, vendor and maintain the price for ur condition type.
Create a PO ,system automatically picks the price from the record.
save the po
capture the tax using T-code: J1IEX_C and save.
after that do MIGO or while receiving the matl itself you can capture, based on customization.
Rewards if useful
Regards
Viru

Ftxp tax code

Hi,
1 I have the below list of tax category to choose from in FS00. May I know why only A0 and V0 exist in FTXP?
- Only input tax allowed
+ Only output tax allowed
All tax types allowed
< Input Tax Account
> Output Tax Account
A0 Output Tax - 0 %
V0 Input Tax - 0 %
2 what is procedure in FTXP?
Thanks
Rgds

Hi,
A0 and V0 are two Zero tax % codes means they dont have any Tax rate (0%) . These Tax codes are codes for certain GL accounts where Tax category is preesent but if the transaction is not attracting any tax but if the tax field is required then these two tax codes will be used based on the business transaction (input or output).
In FTXP you will define tax codes with the tax rate and GL account to which VAT will be posted.
Regards
Srikanth
Edited by: boddupalli srikanth on Sep 15, 2009 6:44 PM

Tax code maintained as ZERO, then also tax has been charged in billing docu

Tax code maintained as ZERO, then also tax has been charged in billing document. Please help to find some solution
Point will be rewared accordinly..
DAVID

In access sequence, if you check for your tax condition type, see what table is maintained. Normally, for domestic scenario, table 368 would be used.
So go to VF02, key in the billing document and execute. There go to "Header" tab and check what tax classification for customer is flowing under the sub tab "Taxes".
Next go to item level tab "Item Detail" and see what tax classification is flowing for that material.
Now in VK12, for your tax condition type, you should have assigned tax code for the above combination. From your comments, it seems, you have maintained for wrong combination.
thanks
G. Lakshmipathi

Getting the default zero-rated sales and purchase tax codes

Hi,
Does anyone know how to obtain the default zero-rated sales and purchase tax codes? ie the tax exempt sale and purchase tax codes. The OADM holds the default sales and purchase tax codes but not the default zero-rated sales and purchase tax codes. Is this set by region?
Lita

Hi Lita,
I don't know much about the zero rated tax codes or where it is set up, but what I can suggest is if you know where the system retrieves it (say on an Invoice) that you use SQL Profiler to possibly investigate where the queries are pulled from.
Where in SBO is the zero-rated tax codes used?
Hope it helps,
Adele

Mass Contract Update - Item price become zero after Tax Code change

HI Guru,
I have issue on the contract net price which become zero after change in Tax code of item.
Took the opportunity to update contracts to reflect the changing VAT code (from V0 to V1 for some items) from the Trx code: MEMASSCONTRACT. However, having run the transactions (ME33K) above the contracts are now displaying zero prices on the Item Overview. The conditions are all correct (PB00) and the follow on purchase orders seem to be picking up the correct prices but we need to resolve the issue of zero prices on the item overview.
Please help me in this why it is happening like this? & what is the solution for it.
Thanks in advance
Praveen Katageri

Hi,
If pricing picking , just check validity period ( Valid from & Valid to) in condition of the Info record.Also check any scale is used & price active or not in condition of Info record.
Regards,
Biju K

TDS Tax codes

Hi
Dear friends, please tell me why do we require two type of tax codes in TDS like tax code for invoice posting & tax code for payment. Please explain briefly the scenario for each case.
Regards

Hi Arun
Please go through the following whether my understanding is correct:
Tax code at the time of invoice:
Here we will enter the invoice value including TDS (?) and apply the tax code defined for invoice posting and the system then splits the invoice value into purchase value + TDS amounts applicable. Then we make the final payment and at that time we will not mention any TDS tax codes and the system automatically adjust the entries and clear the invoice.
Tax code at the time of payment:
Here I am required to make a downpayment. At the time of downpayment, I will post the downpayment with a tax code defined for payment and the system debits the applicable TDS on the downpayment. I then post the invoice for purchase. What would be my amount of invoice in this case ? Do I need to enter a tax code on this invoice ? I then post the final payment and I apply the tax code (defined for payment) at the time of payment. System then adjust the downpayment and clears the invoice with the balance amount. Is my understanding correct ?
I am confused what would be the amount of invoice I should be putting in both these cases.
If you do not mind, please clarify me taking these two situations separately.
Thanx in advance.
Regards

How many new tax type and tax code are created for change in TDS

Hello Gurus.
we are using SAP since more than one year.
now tDS rate is change , so i would like to know How many new tax type and Tax Code is created in our system
and also like to know At what percentage i will crete that new tax code.
we have pair of tax type and tax code as shown in Example( for Interest) below
Tax type        Tax code           Name
I1      IC      Sec 194A - Interest on deposits
I1      IO      Sec 194A - Interest on deposits OT
I2      IC      Sec 194A - Interest on deposits Surcharg
I3      IC      Sec 194A - Interest on deposits EC& SHEe
I3      IO      Sec 194A - Interest on deps EC& SHEe OT
I4      IC      Sec 194A - Interest on deposits Pymt
I4      IO      Sec 194A - Interest on deposits Pymt OT
I5      IC      Sec 194A - Interest on dep Pymt Surcharg
I6      IC      Sec 194A - Interest on dep Pymt EC& SHEe
so how namy additional reuire to create new tax type and code more.
i am waiting your reply.
Regard,
Riten patel
Edited by: riten patel on Oct 29, 2009 10:23 AM
Edited by: riten patel on Oct 29, 2009 10:23 AM
Edited by: riten patel on Oct 29, 2009 10:33 AM

Hello Hansachechani
we have followinng   tax key
115O     Dividend 115O(1)
192B     Salary
194A     Interest income other than securities
194C     Payment to contractors
194H     Commission
194I     Rent
194J     Prof/Technical services
195     Payment to foreign nationals
206C     Tax Collected at Sources (Scrap)
ST     Service Tax
and we have followig tax type
C4     Sec 194H Commission Payment
C5     Sec 194H Commission Pymt Surcharge
C6     Sec 194H Commission Pymt EC & SHE Cess
D4     Sec 115O(1) Dividend Payment
D5     Sec 115O(1) Dividend Pymt Surcharge
D6     Sec 115O(1) Dividend Pymt EC & SHE Cess
F4     Sec 195 Foreign Prof fees Payment
F5     Sec 195 Foreign Prof fees Pymt Surcharge
F6     Sec 195 Foreign Prof Fees Pymt E&HS Cess
G1     Service Tax on GTA
G2     Service Tax on GTA E Cess
G3     Service Tax on GTA S&HE Cess
I4     Sec 194A Int on Deposit Payment
I5     Sec 194A Int on Deposit Pymt Surcharge
I6     Sec 194A Int on Deposit Pymt EC & SHE Ce
L4     Sec 194C Contractors Payment
L5     Sec 194C Contractors Payment Surcharge
L6     Sec 194C Contractors Payment EC&S HE Ces
P4     Sec 194J Professional Payment
P5     Sec 194J Professional Pymt Surcharge
P6     Sec 194J Professional Pymt EC & SH E Ces
R4     Sec 194I Rent Payment
R5     Sec 194I Rent Payment Surcharge
R6     Sec 194I Rent Payment E Cess & SH E Cess
So Is it necessary to create new tax key and tax type?
wheather i create new tax code only?
I ma waiting your reply.
Regard,
Riten patel

Zero Tax Codes TDS Cdertificate

Similar Messages

Maybe you are looking for