ZFD 4.00 update options

Hi,
I have ZFD 4.00 in my NW 5.1 environment. NOT 4.01, just original out of
the box 4.00. It does everything I need it to do; imaging, policies
(including group policies) remote control, app objects and NAL delivery.
It has been working great since day 1 and Ive imaged and deployed about
120 PCs with it, all XP with sp1.
Problem: Time to deploy more PCs. I know at least 2 things; 1, I will
not be able to image them with ZFD 4.00 because the NIC wont be
understood. 2, There may be some policy problems or weird goings-on
because these new PCs will have XP sp2 on them.(I still have to check the
Cool Solutions site; I recall that there was an entire thread on sp2
issues so Im not too worried about that)
OK, I know one more thing; Im EXTREAMLY APREHENSIVE about patching ZFD
and breaking what I already have!
Questions:
1.Where to start? All of the patches I see refer to the baseline as ZFD
4.01 (such as zfd 401 ir6.) Can I even do anything with 4.00? Going to 7
isnt an option at this time; too many technical and monetary hurdles.
2.Can I update just the imaging pieces so I can somehow do imaging with
what I have? (To make matters worse, I have no Linux experience or Linux
box to gen imaging files with.)
All suggestions GREATLY appreciated!
Gregg

Gregge,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Adobe Bridge CS4 pops error when Update Option from Help is launched

Hi All,
when i m trying to Launch the Update from the help menu of Adobe Bridge it pops-up with a error messge instead of launching update.
The error says
Adobe Bridge
Bridge is not in a position to check for updates.
The cause of the error may lie in the fact that an Internet connection can be established or that you are logged in as a user without administrator privileges.
Ok
Please help what is the probable cause for this.
I have tried disabling the updateoption by
1) Adding the Enterprise DWORD value in registry HKLM\Software\Adobe\Updater
2) Adding the "Update" "Suppress" value in "Application.XML.Override" file while installing the CS4 Suite
I am using Vista Build is the behavioural diff seen on XP n Vista
Thank You

Hey
Apologies I dont think I had made myself clear.
I am trying to package Adobe Photoshop CS4 which has Adobe Bridge as a component. As per the company standards, I am suppossed to be deploying this package & installing it using silent setup. Since this is a corporate environment, they do not want any auto updates to be enabled, as well as disable all menu items related to updates. Hence I had checked through the Adobe Support Site and followed the instructions provided by using the Adobe Deployment Toolkit and supressed the updates using the tool.
Inspite of following the steps mentioned in the Deployment Kit and the guides associated with it, I was unable to supress the Updates options that reflects under Help Menu for Adobe Bridge CS4. All the other associated programs like photoshop, Extend Scripts etc the updates are disabled. The problem seems to be only with the Adobe Bridge Update.
I have also tried disabling the update option by
1) Adding the Enterprise DWORD value in registry HKLM\Software\Adobe\Updater
2) Adding the "Update" "Suppress" value in "Application.XML.Override" file while installing the CS4 Suite
Inspite of trying the above steps the update option in the menu is still enabled and when I click on the updates menu item I get the following error message.
Adobe Bridge
Bridge is not in a position to check for updates.
The cause of the error may lie in the fact that an Internet connection can be established or that you are logged in as a user without administrator privileges.
Ok
Please advise,

How do i update the software on an iphone 3g as it doesnt have the software update option on it, how do i update the software on an iphone 3g as it doesnt have the software update option on it

how do i update the software on an iphone 3g as it doesnt have the software update option on it, how do i update the software on an iphone 3g as it doesnt have the software update option on it

Hey wemmer
Check out the following article on how to update you iPhone. The section you are looking for is Update your device using iTunes.
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT4623 hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....

hi... can someone please help me.. i want to download the latest ios, but do not have the software update option in the general settings....

Connect it to iTunes on a computer and update it from there.
(73609)

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve .....

My AppStore id is my apple id n password which is good when purchasing. But when I am updating from update option it ask for a password. The user id I see there is not mine, it's different. How do I change that to my apple Id? Please help me resolve this issue. I have tried resetting it but nothing... Either I'm doing something wrong or....

I believe the issue is with the Apple ID that was used to purchase the App. If you download an App that was purchased under a different Appple ID then all updates will also be linked to the original purchaser's Apple ID. Your Apple ID is the the same ID as your iTunes, iCloud, etc. Some folks use different ID for the different Apple sites. No need for that One ID for all Apple Sites, and if someone else buys an App using their ID and they(you) download that App onto your device and that App requires an update it will ask for the purchasers Apple ID. This happens a lot when folks sell their iPad or give it to someone else and leave some purchased(free) Apps on the iOS device. You cannot change the original ID the App was purchased under. A suggestion would be if someone else has an App that you like but do not want to pay for use their ID or in the future have them gift the App to you.

I selected update option and it erased my ipod with all downloaded and paid materials...any ideas for how to restore?

I selected the update option and it erased my ipod with all downloads and other materials lost...any ideas on how to restore?

Everything should be on your computer. Just sync it back.
Did you fail to make sure that everything was on your computer before updating?

HT4623 While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

While updating ios6 through software update option, i am getting the error"unable to install the update an error occured installing IOS6"

I am getting this message also.... mine cant update too...

Can't find "Check for updates" option in Help menu

Hello
I am planning to update several adobe reader installations over a windows domain. First of all, I tried to do it in one particular machine without administrative privileges (not being Local Administrator).
I am surprised of not finding the "Check for updates" option. What is more, there is no topic in the forums about this issue (?).
Please, could anyone tell me what am I missing?
Thanks in advance.

Yes I'm afraid that update must be run with administrative privileges... But there must be another way of updating a product across a network of 400+ clients without login in all of them ...
I'm trying with adobeupdatechecker, to see if it is possible some kind of automation.

My ipod touch 4th Gen doesn't give "System update" option in General settings, how can i fix it?

My gf gave me her old ipod touch. the 4th gen one with the front facing camera, the version is 4.3.3 and I'm trying to update it, but when I go into "general" and right under the "about" option it should give me the "system update" option but it doesn't, is there a reason for that?

That option won’t appear in iOS versions prior to 5.0; update it from iTunes on a computer as described at the bottom of this article. It can only be updated directly to the newest iOS release supported by the device’s hardware.
The maximum iOS version for the fourth generation iPod touch and iPhone 3GS is 6.1.6.
(111495)

How do I update my iPad 2, iOS 5.1 to 7.0 when there's no further update option?

I need to update to 7.0, from 5.1 on iPad 2, so that I can use all functions and download apps.....,but there's no option to update beyond 5.1 and says it's updated. Help!!!!

If it does not have a camera, then its a First generation iPad, and it cannot be updated past iOS 5.1.1.
If it does have a camera then it can be update to iOS 7.1.2. However, if there is no Software Update Option in Settings, you will need to connect the iPad to a computer running iTunes and update through there.
Update your iPhone, iPad, or iPod touch
Scroll down to the section titled: Update your device using iTunes

I have an ipad 2, MC769x it is running 4.3.3 (8j2) i have been trying to upgrade to ios 5 or higher but a) I don't have a software update option on my Settings / General screen. And b) when I go into itunes I don't get tihe options suggested on the forums

I have an ipad 2, MC769x it is running 4.3.3 (8j2) i have been trying to upgrade to ios 5 or higher but a) I don't have a software update option on my Settings / General screen. And b) when I go into itunes I don't get tihe options suggested on the forums. I really want to upgrade my ipad as I want to buy and install some apps that are only available from ios5 onwards. I have been a big apple fan but I am now wondering if my ipad2 was a mistake.

If your are using IOS 4, see below.
http://support.apple.com/kb/HT4972

Help me in creating a Trigger for Insert and Update Options

Hi
Please help me in creating a Trigger .
My requirement is that after insert or update on a Table , i want to fire an event .
I have started this way ,but doesn't know how to fully implement this .
say i have a dept table
CREATE TRIGGER DepartmentTrigger
AFTER INSERT ON Dept
BEGIN
INSERT INTO mytable VALUES("123","Kiran");
END DepartmentTrigger;
Please tell me how can i put the Update option also .
Thanks in advance .

Please tell me how can i put the Update option also .Add "Or Update". ;-)
Here are a few suggestions, but you definitely need to refer to the manual page that the previous poster suggested.
CREATE OR REPLACE TRIGGER DepartmentTrigger
AFTER INSERT Or Update ON Dept
BEGIN
INSERT INTO mytable VALUES(:new.Dept,'DEPT ADDED OR CHANGED');
END DepartmentTrigger;
The "Or Replace" means you can replace the trigger while you're developing without having to type in a drop statement every time. Just change and rerun your script, over and over until you get it right.
Adding "Or Update" or "Or Delete" makes the trigger fire for those events too. Note, you may want seperate triggers in different scripts and with different names for each event. You have to decide if your design really does the same thing whether it's an insert or an update.
:new.Dept is how you would refer to the changed vale of the Dept column (:old.Dept is the prior value). I changed the double quotes on the string in the VALUES clause to single quotes.
Andy

Insert, Delete and Update options in Table control

Experts,
I have writen code for Insert, Delete and Update options in Table control. They are not working properly...
can any one send the code for the above please...
Thanks in advance..

Hi,
Following steps will help you.
1.TOP-INCLUDE
DATA: ITAB1 LIKE KNA1 OCCURS 0 WITH HEADER LINE.
DATA: ITAB2 LIKE KNA1 OCCURS 0 WITH HEADER LINE.
DATA: WA LIKE KNA1.
DATA: ANT TYPE I,CUR TYPE I.
DATA: OK_CODE TYPE SY-UCOMM.
CONTROLS: TABCTRL TYPE TABLEVIEW USING SCREEN 100.
IN FLOWLOGIC
PROCESS BEFORE OUTPUT.
LOOP AT ITAB1 CURSOR CUR WITH CONTROL TABCTRL.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CLEAR_DATA.
LOOP AT ITAB1.
MODULE MOVE_DATA.
ENDLOOP.
ADD OK_CODE IN ELEMENT LIST. CLICK ON LAYOUT AND ADD TABLE CONTROL(name it as TABCTRL) AND PUSHBUTTONS AS FOLLOWS.
SELECT THE FIELDS FROM PROGRAM. SAVE CHECK AND ACTIVATE.
CLICK ON FLOWLOGIC EDITOR FROM APPLICATION TOOL BAR.
DOUBLE CLICK ON MODULE CLEAR_DATA.
write the in this module as below.
CLEAR ITAB2. REFRESH ITAB2.
DOUBLE CLICK ON MODULE MOVE_DATA.
write the code in this module as below.
APPEND ITAB1 TO ITAB2.
ACTIVATE PAI AND WRITE THE CODE AS BELOW.
CASE OK_CODE.
WHEN 'FETCH'.
SELECT * FROM KNA1 INTO TABLE ITAB1 UP TO 20 ROWS.
TABCTRL-LINES = SY-DBCNT.
WHEN 'ADD'.
GET CURSOR LINE CNT.
CNT = TABCTRL-TOP_LINE + CNT - 1.
CLEAR WA.
INSERT WA INTO ITAB1 INDEX CNT.
WHEN 'MODIFY'.
GET CURSOR LINE CNT.
READ TABLE ITAB2 INDEX CNT.
LOOP AT ITAB2.
MODIFY KNA1 FROM ITAB2.
ENDLOOP.
SELECT * FROM KNA1 INTO TABLE ITAB1.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
SAVE,CHECK AND ACTIVATE ALL.
CREATE TCODE AND EXECUTE.
contact if u hv any issues regarding this code.
reward points,if it is useful.
Thanks,
Chandu.

CS6 Photoshop Update Option Does Not Run

I ran the Update option once, mainly to get the ACR 8.2 version. It looked like all the files downloaded successfully and that the update process started. Then nothing.
- Clicking Update has no effect. There are absolutely no error messages.
- Downloading the ACR 8.2 file and trying to run the AdobePatchInstaller.exe file does nothing.
- Removing the Adobe Application Manager (AAM) Cache accomplished nothing.
- Trying to run the AAM does nothing.
A popup message just informed me that there are 9 Adobe updates available and to launch AAM. Which, of course, accomplishes nothing.
A support person on Live Chat said this is a known issue.
What I need is a known solution. I'm running Win7 Pro, SP1, 64-bit, 8Gb RAM, GeForce GT 630 Nvidia chipset graphics card.
Thank you.

Update AAM after downloading from below link.
http://www.adobe.com/appsmanager/index.html
Try Help->Updates again, if it still does not resolve your issue, Please let me know.
Regards,
Ashutosh

I just upgraded to Photoshop cs6 so that my new camera (Nikon D7100) would work in Camera Raw. However, it will not download from the "Update" option in CS6.

I just upgraded to Photoshop cs6 so that my new camera (Nikon D7100) would work in Camera Raw (I was told that the Camera Raw update 8.3, which is available for CS6, included this camera). However, it will not download from the "Update" option in CS6. I have tried over 10 times - it just says update is not working. and I cannot find an alternate way of downloading this file. So I still can use my camera, even thought I paid to upgrade. HELP please.

What OS do you have? You say you have explained what you had (computer/opsys) but I honestly don't see it here. If you had mentioned that my advice would have been different; I believe you can only upgrade as far as Camera Raw 8.3 on an older Windows system. There is more information here (look specifically for the "Revert to 8.3 ..." titles).
Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista
What you've done/written in your last post confuses things further, unfortunately. Photoshop 13.1 is strictly a Creative Cloud version. The highest you can go is Photoshop CS6 13.0.1.3 with perpetual license.
And as far as I can recall, that version can work on Windows back to XP:
System requirements | Photoshop
I don't think you're out of luck, but you seem to be leaping into doing things without having the full story, and are jumping to conclusions a bit too quickly.
Here's what I suggest you try:
1. Remove Photoshop entirely with the Creative Suite Removal Tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
2. Install Photoshop CS6 from your original media or from here:
Download CS6 products
3. Update the application using its own Help - Updates process. That really should get you the latest Camera Raw version that will work. If that does not bring you a Camera Raw that works with your Nikon, use the "Revert to 8.3" instructions above.
-Noel

ZFD 4.00 update options

Similar Messages

Maybe you are looking for