ZFS Configuration - getting different disk target numbers

Hi ,
We are in the process of configuring Oracle 11gR2 RAC, we are using ZFS as ISCSI storage. getting different disk target numbers on both machines. ( disk 4,5 and 6). to configure ASM we need to set the them unique, please help us to reset volume names.
i.e.
4. c2t25d0 <DEFAULT cyl 3580 alt 2 hd 128 sec 32>
Disable ISCSI Multipathing on dev2 and dev3:
cat /kernel/drv/iscsi.conf
set mpxio-disable="yes"
[root@dev3 /]$ format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
       0. c1t0d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
          /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@0,0
       1. c1t1d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
          /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@1,0
       2. c1t2d0 <SEAGATE-ST914602SSUN146G-0603-136.73GB>
          /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@2,0
       3. c1t3d0 <SEAGATE-ST914602SSUN146G-0603-136.73GB>
          /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@3,0
       4. c2t25d0 <DEFAULT cyl 3580 alt 2 hd 128 sec 32>
          /iscsi/[email protected]%3A02%3Aadfcea0d-d88e-e052-eeaa-d523fb12bce40001,0
       5. c2t26d0 <DEFAULT cyl 39159 alt 2 hd 255 sec 63>
          /iscsi/[email protected]%3A02%3Aa0833922-e008-c492-c50e-fe09b494248f0001,0
       6. c2t27d0 <DEFAULT cyl 65267 alt 2 hd 255 sec 63>
          /iscsi/[email protected]%3A02%3A66ba50e2-51ce-665d-e32c-d8449d1e7ec10001,0
[root@dev4 /]$ format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
       0. c1t0d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
          /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@0,0
       1. c1t1d0 <DEFAULT cyl 17845 alt 2 hd 255 sec 63>
          /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@1,0
       2. c1t2d0 <SEAGATE-ST914603SSUN146G-0868-136.73GB>
          /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@2,0
       3. c1t3d0 <SEAGATE-ST914603SSUN146G-0868-136.73GB>
          /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@3,0
       4. c2t23d0 <DEFAULT cyl 39159 alt 2 hd 255 sec 63>
          /iscsi/[email protected]%3A02%3Aa0833922-e008-c492-c50e-fe09b494248f0001,0
       5. c2t24d0 <DEFAULT cyl 65267 alt 2 hd 255 sec 63>
          /iscsi/[email protected]%3A02%3A66ba50e2-51ce-665d-e32c-d8449d1e7ec10001,0
       6. c2t25d0 <DEFAULT cyl 3580 alt 2 hd 128 sec 32>
          /iscsi/[email protected]%3A02%3Aadfcea0d-d88e-e052-eeaa-d523fb12bce40001,0Regards,
Sachin

I have no room for the ZFS partition on a slice. I
have a lot of free space unallocated to any partition
and this is where I would like the ZFS partition.You would need to allocate it to one yourself.
I
saw a lot of confusion between slices and
partitions.Yes. In many cases they are used interchangably.
However, I often try to use the term "slice" for the solaris label subdivision, leaving "partition" to refer to x86 architecture-specific divisions.
Solaris on x86 can only (easily) use a single x86 partition of type "Solaris". You can't use another partition (whether with ZFS or not).
In my case, I have a 20GB partition where I have 10
slices created when I installed Solaris on UFS.
The 120GB left is not allocated to any slice.If it's visible to the Solaris label, then allocate it to a slice.
Darren

Similar Messages

W2k8R2 Windows Backup - BMR on different disk configuration - How to move one parition of three parition to an other raid-disk?

Hello folks,
I need your help in following situation.
My source-system has 1 RAID5 (600GB) over 5 HDDs. On the RAID-Disk are one primary partition (250GB) and 1 extended partitions (350GB).
Because the hardware is out of support, I will migrate it to new hardware-server. I must minimized the downtime and the administrative effort. So I can't reinstall a new windows-installation, because 4 different software-licences are binding on SID. Additional
a DFS-R is configured, so I need some hours to reconfigure it.
The new destination-system has one RAID1 (300GB) that I will use it for windows-system, and one RAID 6 (1TB) that is planed for data.
I has make a full backup (with all Critical) by using Windows Server Backup to a NAS storage. Than I has boot my destination system from Windows Server 2008 R2 media, and will make a recover. All Hard Disk is detected, after I install the storage-drivers. When
I confirm the last step in windows-server-backup, windows-backup stop with error "Not enough space on harddisk 0"
How can I move the extended partition to harddisk 1 (RAID6) durring BMR??? I cann't exclude the volume in backup-procedure, because the DFS-R is installed with some share on this disk.
Has anyone a idea?
Best regards

Hi,
I'm afraid we will not get it resolved. BMR will restore the partition information so you need at least a 600GB disk/RAID to restore both Drive C and D - it will create partitions on disk/RAID but cannot be separated restore to different disks/RAIDs.
How about get another 300GB disk and change your system RAID from RAID1 to RAID5. (Or change RAID1 to RAID0 but of course you will lose fault tolerance ability).
If you have any feedback on our support, please send to [email protected]

ZFS Configuration Question - Also posted in Solaris x86

Hello,
I have 2 x 140GB (hw Raid-0 + spare). About 20GB is allocated to Solaris on UFS (standard installation and partitions/slices).
I would like to allocate the 120GB left on the disk drive to ZFS. That space is not unallocated to any file system for now.
I found a lot of documentation of how to create a ZFS Pool on an empty disk drive. The documentation is less clear on how to do it on a drive already use by another FS.
Any help will be appreciated.
Michel

Darren,
I just setup another Solaris x86 server tonight to play with. That future production server is in it's own vlan wtih no Internet access for now.
The test server has the same configuration, but less disk space.
Here is the output of prtvtoc
# prtvtoc /dev/dsk/c0t0d0s0
* /dev/dsk/c0t0d0s0 partition map
* Dimensions:
* 512 bytes/sector
* 63 sectors/track
* 255 tracks/cylinder
* 16065 sectors/cylinder
* 2350 cylinders
* 2348 accessible cylinders
* Flags:
* 1: unmountable
* 10: read-only
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 10522575 27198045 37720619 /
1 3 01 16065 8401995 8418059
2 5 00 0 37720620 37720619
7 8 00 8418060 2104515 10522574 /export/home
8 1 01 0 16065 16064
Output of format
selecting c0t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
/dev/dsk/c0t0d0s0 is currently mounted on /. Please see umount(1M).
Total disk size is 8920 cylinders
Cylinder size is 16065 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
====== ====== ============ ===== === ====== ===
1 Active Solaris2 1 2350 2350 26
As you can see, the 1st partition is used at 26%. With fdisk, I can create a 2nd partition. My problem is to get that 2nd partiition availlable to Solaris and create a zpool in that unused space..
Michel

How to get rid of the numbers on the Pages flag icon

How do I get rid of the numbers tag at the top of the Pages Flag in iWork

Lola
Got your email and couldn't clearly see what you were talking about because you reduced the resolution on a busy background. So I went to the iTunes Store to find if there was something similar.
That is the Facebook Pages Manager, and is telling you you have notifications pending in Facebook.
The Pages refers to the "pages" (different views) of content in Facebook, nothing to do with Apple's Pages.
Peter

Iphone 5 not getting text from new numbers?

im on ios 7.0.4. Recently, ive been having the problem of not getting messages from new numbers. I receive all texts and calls from all current phone numbers ive ever had contact with. But for the past month, any new numbers that text me first, i do not receive them. But if i text and or call them first, it works fine. Which isnt always a convinence. They sent me screen shots of my number and their text; they all have different phones on different services.

Perk123, this is a text messaging mystery! I'm on the case. I recommend that delete all unwanted text messages on your device and power it off/on to soft reset it.
You will also need to advise your friend that has the AT&T iPhone to reset the network on their device. This can be done by accessing Settings >General >Reset >Reset Network.
Lastly your friend needs to verify if your contact has been set up to block calls and text messages from your mobile number. This option is located in Contacts >your contact> Block this caller.
Keep us posted.
LasinaH_VZW
Follow us on Twitter @VZWSupport

Windows 8.1 Hyper-V - Error while configuring the hard disk 0xC03A0014

Hello. I have just enabled Hyper-V on my Windows 8.1 laptop.
Dell Latitude E7440 i7-4600U @ 2.10GHz
I can create a Virtual-Switch but I am unable to create a new Hard Disk or Virtual Machine within Hyper-V. I get the same error for both processes.
Error: The Virtual Machine Management Service encountered an error while configuring the hard disk on virtual machine New Virtual Machine.
Failed to create the virtual hard disk.
The system failed to create C:\Users\user\Documents\Test\New.vhdx .
Failed to create the virtual hard disk
The system failed to create C:\Users\user\Documents\Test\New.vhdx . A Virtual disk support provider for the specified file was not found. (0xC03A0014).
I have ran all Dell Client System updates and all of windows updates.
I have attempted to create a virtual machine on the current SSD and also an external drive. The same error appears.
I have also attempted to create a virtual hard disk via Hyper-v with a Base vhdx, still the same error occurs. I've tested the base image on other laptops of the same model and windows 8.1 without issue.
Any thoughts on how I can fix this?
Thank you,
-Jake

Hi Jake,
"Enable Data Execution Protection (DEP) in the BIOS and make sure the Format of drive file system is not fat32.
1. Uninstall Intel Active System Monitor 3.0, if installed.
2. Disable "Intel IPMI Service" and "Intel Monitoring Agent" Service.
3. Open regedit and locate: HKLM\System\CurrentControlSet\Services\imbdrv.
4. Change the Start Key to 4 (Disabled).
5. Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E97D-E325-11CE-BFC1-0 8002BE10318}.
6. Take ownership of the ‘Properties’ key.
7. Give yourself full permission for this key.
8. Now locate the properties key; if you see a ‘Security’ entry there, that is your problem. Delete this key.
9. Try attaching or adding the VHD again after rebooting.
If above steps did not help, add the Network Service account to Local Administrator group."
It is quoted from the similar thread below :
http://social.technet.microsoft.com/Forums/windows/en-US/55085ff3-0f26-41bd-b590-bb3490e2d6f5/win-7-professional-a-virtual-disk-support-provider-for-the-specified-file-was-not-found?forum=w7itprovirt
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Get msg disk is full when trying to save a PDF file

Running windows 7 and latest version of Adobe Reader. I get the following message when I try to save a PDF file to disk.
The disk you were saving to or the disk used for temporary files is full. Free some space on this disk & try again or save to a different disk. The disk I am trying to save the file to has over 200gb of free sapce!!

I found a workaround online, here's the a linkhttp://www.thedailydecibel.com/2011/10/adobe-reader-disk-full-error-message.html
I was having the same issue with Adobe Reader 11.0.2 plugin for Internet Explorer. So the directions in the above link are slightly different for Reader 11.
Edit > Preferences > Security (Enhanced)
Uncheck the box for "Enable Protected Mode at startup".
I have no idea if there are any negative consequences with turning this option off.

Getting error in target SOAP communication channel

Hi all,
I am trying to send data from Http client to Webservice.In moni i got a message processed successfully means getting black flag.But i got an error in SOAP Communication channel as "error in response".
I got this message from that error
<b>"SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy service is denied. )"</b>
Source side i dont configure Http adapter.Target side i configured SOAP adapter.In that SOAP adapter i configured these fields.1)Target URL 2)Configure Proxy 3)Configure proxy user authentication.
I want get response from webservice.Please help me.
Thanks,
Gopi.

Hi,
Make sure that you have specified the proper host and port values, in the text box that appears when you check the configure proxy check box(in receiver soap adapter).
Looks like the webservice requires a proxy authentication.
Select the check box "configure proxy user authentication"(in receiver soap adapter) and provide the correct username and password.
Regards,
Smitha.
Message was edited by: Smitha Rao

Can I get different background colors on menu items?

I've been trying to get different background colors on my menu (Quick launch) items for a while, without success. What I want is the even numbered items (the second, fourth, sixth...) to have a different background color than the uneven ones (first, third,
fifth...).
Anyone knows if this can be done?
Thanks, guys!

Can you do something in the javascript code where you have given specific IDs to each buttons in your menu? It could end up in something like "$('#menu_id').css('background-color', '#1B3E70');"
Or, let say you have controls defined like thie:
<body>
<ul class="menu">
<li class="menu-item"><a>item 1</a></li>
<li class="menu-item"><a>item 2</a></li>
<li class="menu-item"><a>item 3</a></li>
</ul>
</body>
Can't you write at render stage this kind of actions by index:
var i = $("li").index( $(this).parent() );
if ( i === 1 ) {
$('body').css('background', 'red');
} else if ( i === 2 ) {
$('body').css('background', 'green');
} else {
$('body').css('background', 'brown');

How can I split my current video into several segments. To put on 3 different disks. Can I do this with out losing all the work?

I need help. I have completed my video and now realize it is too big for a single DVD. Is there a way I can split the video and not lose the current info so I can put video on 3 different disks?
Thank You
pbcatt

pbcatt
Thanks for the update. Looking forward to your results from further searches for that .iso file.
If you burn a Timeline content to a video file saved to the computer hard drive, you can use Publish+Share/Computer/and one of those choices to get a video file (.mov, .mpg, .avi, wmv, mp4, m2t). But, this route does not allow for menus. You can take the saved video file and transfer it to USB Flash Drive or memory card, and, if your player supports that, you can playback the file with the player.
When you burn a Timeline content to DVD-VIDEO on DVD disc, menus are supported. And, what you have on the DVD after the burn to disc are two folders (OpenDVD and VIDEO_TS) in the correct disc system format. It is the VIDEO_TS Folder on the disc that has the video files and menu files for DVD-VIDEO format.
When you take the Timeline content to Publish+Share/Disc/DVD, but use Folder (4.7 GB), you end up with a saved folder which contains the same OpenDVD Folder and VIDEO_TS Folder that you would have gotten from the direct burn to disc. But, now you need to take just the VIDEO_TS Folder from the saved folder and get it to a DVD disc in the correct disc system format. You do that with a free 3rd party software such as ImgBurn.
If you go the ISO Image route, your DVD video files (video and menu et al) are saved as a file in format represented by the .iso file extension. It is essentially a copy of your DVD-VIDEO data including menus. The .iso image produced can be taken to DVD disc to produce the DVD-VIDEO on DVD disc.
So, in the case of burn to folder, you are looking for a saved folder with OpenDVD Folder and VIDEO_TS Folder inside.
In the case of the burn to ISO Image, you are looking for a file with the .iso file extension.
The Save In: location of the burn dialog should point to where you are going to find the folder or file after the burn to.
Please consider. We will be watching for further developments.
ATR
Add On...have you told me yet what is exactly shown in the Save In field of your burn dialog?
C:\Users\owner\Documents or something else?

How to set different font for numbers in headings and TOCs

Hi,
I've noticed some people use a different font for numbers in headings and TOCs to get some extra magic. Is there any way to automate such use of fonts in the paragraph styles?
Oh, and any suggestions on what fonts would be good for numbers?
Thanks!

I was merely continuing on the original theme -- any digit in any character style. It was only later revealed that (a) the OP needed old style figures, and (b) those were available in his font from the start.
The negative lookahead is the answer to his question (copied in full now)
Based on the above InDesignSecrets tutorial, does anyone know what to do if some of the numbers end with a dot or a comma?
Like the Norwegian date format: 13. mai 2009
Or the Norwegian way of pricing items: 2900,-
and my example shows it can be done, but with an added caveat. If digits are to be set in red, using the exceptions the OP asks for, my example sentence will come out as
"Think of a number between 1 to 10, but don't use 9."
rather than the (here) intended
"Think of a number between 1 to 10, but don't use 9."

In KA02 screen how can I get different functional area like (Production, Sales, Adminstration etc)

In KA02 screen how can I get different functional area like (Production, Sales, Adminstration etc)

Hi,
Please check below configuration for defining functional areas for cost elements
SPRO> FI > FI Global settings> company code> cost of sales accounting>Functional area > enter functional area
Regards,
Jyoti

How do MAX configurations get saved on cFP?

I need to find out how the MAX configuration gets saved on a cFP-2200 module so I can read from it dynamically. I need to do this in order to make installations of my software more generic, allowing dynamic reading of input channels without having to know things like the DNS name ahead of time. I already understand how to create dynamic paths with LabVIEW but it seems that changing the DNS name to something other than what the original install was under makes any paths using the new name useless. I am using RT "Get target info" to dynamically see the target's name. Working this name into the path for looking up input on the cFP-AI-102 channels only seems to work if the name stays the same as it was originally.

I am connected to the cFP-2200 over a LAN. I can have several of these at a given site which is why the name needs to be flexible. I also use the name in some VIs for various purposes, such as configuring dynamic TCP listeners on a server application.
When I say "DNS name," I'm referring to the "RT Get Target Information.VI" under the RT toolkit's output cluster and specifically, the element "IP Settings.DNS Name." This is also the name I would set for the target in max and when I do this, the output of "IP Settings.DNS Name" changes with it. Also, when I click "find devices" on the cFP in max, the default comm resource name for the device in the iak file is whatever I had set for the "name" at the time.
The "FP Create Tag.VI" which I am using to create paths to the inputs of the target has an input called "comm resource name." Since this was set to the same thing as the "name" in max, my expectation was that changing the name for a device in max would also change its comm resource name. However, my example above shows my expectation does not match what is actually happening. While the DNS Name is tied to the name set in max, the "comm resource name" is not even though during the initial creation of the iak file in MAX, they are the same.
To make a long story short, I am able to get my software to work by making sure that the comm_resource_name is hard coded to the value originally set in the project which created the build. This solution is adaquate but not optimal because I would rather be looking this up dynamically for the sake of maintainability. If the comm_resource name and DNS Name are separate entities, that is fine. There just needs to be a way to look both up dynamically if they are separate.
I guess this has become more of a suggestion than a problem I'm reporting... unless of course the behavior I'm describing is not what NI intended, in which case it's a bug.

RMAN-06466: error parsing configuration string (CONFIGURE DEVICE TYPE DISK

Hi All
Windows 2003 and 10.2.0.4
I get the following message when executing show all; connected to rman
(I have used grid control 11g for the first configuration of rman. Not sure if it has an impact.)
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP OFF;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F';
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of show command at 09/22/2011 16:04:11
RMAN-12010: automatic channel allocation initialization failed
RMAN-06466: error parsing configuration string (CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO BACKUPSET PARALLELISM 1;)
RMAN-01005: syntax error: found "backup": expecting one of: "clear, parallelism"
RMAN-01007: at line 1 column 28 file: Configuration Row
RMAN>
Reading the manual Database Backup and Recovery Basics
I should be able to configure it like this
RMAN> CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01005: syntax error: found "backup": expecting one of: ";"
RMAN-01007: at line 1 column 42 file: standard input
Anyone that can help me with this ?
Appreciate your feedback.
Thanks
Magnus

What happens if you type "CONFIGURE DEVICE TYPE DISK CLEAR;" ?

PSE 11 (OS X): Help! Catalog has just decided my photos are on a different disk

I've been running PSE on my Mac for several years without problems. I just downloaded about 3,000 new photos from my camera, apparently without problems, but when I clicked on one of the thumbnails, PSE couldn't find the photo. On further investigation, I realized that while the photos had downloaded to the usual place, ~/photos/download, the catalog was now looking for them in the same directory but on my BACKUP disk (I have a second hard drive that I use to keep a copy of my main disk). I have no idea how this has changed or why, as I've never manually moved anything to the new disk, and have no idea how I'd tell PSE to look on a different disk anyway, but it seems to have decided to keep the same directory structure but now to look for everything on a different disk. How can I correct this? I can get PSE to find my newly uploaded photos if I copy them to the backup disk, but this is not what I want - it's supposed to be a backup disk!
Thanks for any suggestions, both about what might have gone wrong and (especially) about how to correct it.
Best,
Richard Stanton

Hi,
Can you please check Edit > Preferences > Camera/Card reader pref > "Save Files In" preference?
Also, for the current situation, you may reconnect the files using File > Reconnect > All Missing Files. You would need to manually locate path ~/photos/download and click Reconnect.
Hope this helps.
Thanks
Andaleeb

ZFS Configuration - getting different disk target numbers

Similar Messages

Maybe you are looking for