Zmg and different version of ZCM?

Hi all,
We are in the (perhaps) odd place where we have 2 sites, one is at ZCM11.3, the other is at 11.2.4. I build all images for both sites (ZCM11.3) and them move the images to where they need to be.
My question is, will an image created with ZCM11.3/with tuxera, be able to be properly restored using a ZCM11.2.4 PXE server/environment?
We are seeing restores that seem to fail with 'Failure to write a Linux hard link error, wanted to verify it's not version related?
Thanks.

Originally Posted by mickers
Hi all,
We are in the (perhaps) odd place where we have 2 sites, one is at ZCM11.3, the other is at 11.2.4. I build all images for both sites (ZCM11.3) and them move the images to where they need to be.
My question is, will an image created with ZCM11.3/with tuxera, be able to be properly restored using a ZCM11.2.4 PXE server/environment?
We are seeing restores that seem to fail with 'Failure to write a Linux hard link error, wanted to verify it's not version related?
Thanks.
I just upgraded the imaging part to 11.3. We are still on 11.2. Works just as before with tuxera.

Similar Messages

Partition Restore Cold Backup Different System and Different Version DB

Is it possible, can we restore the cold backup at different database version and different operating system(but same ENDIAN_FORMAT) ????????
My original system HP-UX (64-bit) and database version 10.2.0.3.0 i have cold backup and i want to partion restore on Linux Redhot 5.5 (64-bit), database version 10.1.0.4.0 .
If it is possible. How can i do this.

My original system HP-UX (64-bit) and database version 10.2.0.3.0 i have cold backup and i want to partion restore on Linux Redhot 5.5 (64-bit), database version 10.1.0.4.0 .1. AFAIK you can not do it i mean wiht cold backup move from HP to linux
2. You can try to use exp-imp if you want to change db version.
See below notes:
Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
Regard
Helios

Xcode using wrong and different version of GCC for linking

I have had this problem with Xcode for several versions now. I am working on plain old C code, but I am using OpenMP. The code compiles just fine with gcc-4.2. If I set up a target to compile the code with OpenMP support and using version 4.2 of gcc, it again compiles just fine...until it gets to the link phase. It then suddenly decides to try linking with gcc-4.0 instead of 4.2. And therefore, it fails because it can't find any of the OpenMP libraries. Anybody else have this issue? Is there a setting somewhere I'm missing? I've got a nasty hack where I made gcc-4.0 a softlink to gcc-4.2. It works, but this is of course distasteful. A real solution would be nice.
Note, I have not tried creating a brand new project file..that's a lot of work as there are many files and targets involved. But I will try it if I have to.
Current version of Xcode is 3.1.3. Thanks again.
David

Not really, unless the answer is to build a whole new project file. I found this discussion earlier, but it didn't really provide any new information except the idea of creating a new project file. But like I said, if I have to do this, I will. But I don't want to go through the effort if there is a simpler solution...and without knowing for sure that it will even work.
Thank you very much for your reply.
Is there some defaults file I can check for what linker is used for a target? Some file I can edit directly?

IPad UIWebView and different versions of XCode

I have an iPad app with a UIWebView which loads some local .rtfd.zip files. The problem is that if I compile the app with XCode 3.2.2, everything works fine, but if I compile it with newer versions of XCode, I just get a blank UIWebView. Here's how I load the files into the UIWebVIew:
- (void)loadFile:(NSString*)file
NSString* resourcePath = [[NSBundle mainBundle] bundlePath];
NSString* sourceFilePath = [resourcePath stringByAppendingPathComponent:file];
NSURL* url = [NSURL fileURLWithPath:sourceFilePath isDirectory:NO];
NSURLRequest* request = [NSURLRequest requestWithURL:url];
[webview loadRequest:request];
[resourcePath release];
All the testing is done in the simulator.
Can you help me?
Thanks in advance!

I have the same problem and still investigating the cause. From a bit a searching, it seems that it may be caused by the way I set up my UIWebView to receive taps (I subclassed a UIView that wraps a UIWebView).
Here is a promising post about the solution:
http://mithin.in/2009/08/26/detecting-taps-and-events-on-uiwebview-the-right-way /

CS3/CS4 - Persistent data and different versions of plugin

Hi there,
In my plugin I have persistent data on e.g., the document and page items.
Say that I'm in version 1.0 of my plugin has a single persistent data field on the document, and that is wish to add a second field for version 1.1.
Does the SDK contain some form of functionallity for merging an old document into a new one that conform with the new fields?
Basically, my problem is that I do not know if I'm allowed to read the new persistent field in my ReadWrite function, since the current document could be created using version 1.0.
I guess that one solution is to tag the document with a version, and use that to determine the functionality of the ReadWrite function? However that do not seem as the most elegant solution...
I hope somebody understands my problem, and has a more sophisticated solution
Thanks
Kind regards Toke

There are basically two ways to deal with this situation.
The first is to let InDesign treat your data as a blob, include your own version number in the blob and parse the blob yourself based on the version number. In this scenario you generally keep your plug-in's version resources the same, so InDesign doesn't know you've changed data formats.
The second is the InDesign way, in that you define a schema resource for each format version of your plug-in. Doing this places constraints on your data, in that changes have to be moderately simple so that InDesign can apply changes to the older versions of your data to bring them up to the current schema.
See Schema.fh in the SDK.
The sample /Adobe_InDesign_CS4_Products_SDK/source/sdksamples/framelabel/FrmLbl.fr also uses schema resources.
The key is to be careful about syncing changes in your data with changes to your plug-in's format version numbers, as well as keeping your data simple enough for the schema system to update it. If you don't, then you need to get into schema updating code and a bunch more work.
Jon

Webutil and different versions of Java Plug-in

Hi Guys!
Our 10g Forms work fine on Java Update 7, but applet doesn't start up if we use Java Updates 10 and up.
Oracle Support says that starting Update 10 it is a complete rewrite from SUN and they advise us to stay with Update 7.
But we have other web apps that are working with Update 11... so there is a problem.
I noticed that java applet when on Update 10 and up gets stuck when trying to load JACOB.JAR which is part of webutil. It just freeze and nothing happens. When I remove webutil entries from formsweb.cfg, the applet starts up fine and I get a database login screen but forms of course don't work because they need webutil.
Who had the same problem please advise.
Thanks,
Dmitri

It only need one try uninstalling both then reinstalling 1.3.0_02 jre's always get screwed up during uninstall or if you are running multiple versions

Actual and Plan Versions annual view - Multiple versions per company code

Good Day,
Iu2019m creating an FI-CO query with an annual view of both Actuals and Plan Values, which uses period and version as input values. The dilemma is around the plan versions which are hardcoded per company codes (eg. 1 Company Code = versions 501 u2013 512)
Can anyone suggest a possible solutions as normally there is only one version used for planning but in this instance there are multiple versions per Company Code.
Currently the report is hardcoded for one Company Code and going forward it should cater for more than one(Company Company* 12 Version)
Kind Regards

Remove restriction on comp code. There could be 2 models.
1. Include comp code, value type and version in the rows. This way you get multiple records for a comp code. One record for actual data and one record each for plan versions. To have this model at the query, the data model in the cube also should be in this way (what we call as the account model), multiple records differentiated into actual/plan by valuetype and different versions by version.
2. Include comp code in rows. Create selections, one for actuals (restrict with key fig and value type 10, actuals), one for each plan versions (restrict key fig with value type 20, version 501. Create one selection for each version this way). This way we have one record per comp code with diff key fig for actual and plan versions. We call this as key fig model. To have this model at the query, the data model in the cube could be account model or key fig model. If it is key fig model then no need of selections. The key fig could be taken directly from the cube.

Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running the current version. The backup file should be restored to a server with version '14.0.0.6106' or later

while Restoring a Site Collection from a different server i got below error in SharePoint 2010.
Kindly let me know , which patch i have to install along with the download link please. i am unable to find the correct patch to download..
Thanks in Advance,
Tarun
TARUN

Hi,
According to your post, my understanding is that you get an error when you restore a site collection from a different server in SharePoint 2010.
I recommend that you can try to click the “KB2536599” for SharePoint 2010 version 14.0.0.6106 to download the patch from the following links and install the patch in your environment.
http://blogs.technet.com/b/moss_it/archive/2011/08/15/lista-di-versioni-di-sharepoint-server-2010-o-sharepoint-foundation-2010-wss-4-0.aspx
http://support.microsoft.com/kb/2536599
After the installation, you need to run the Configuration Wizard. Later you should be able to restore this site collection successfully.
For more information, you can refer to:
https://ammarfassy.wordpress.com/2012/11/29/restore-spsite-your-backup-is-from-a-different-version/
https://social.technet.microsoft.com/Forums/en-US/cb9fb524-2a65-4a59-8f09-fc86366dd1c2/restore-errorversion-of-14006106-in-power-shell?forum=sharepointdevelopmentprevious
http://blogs.technet.com/b/stefan_gossner/archive/2011/07/12/june-2011-cu-for-sharepoint-2010-has-been-re-released.aspx
http://www.sharepointdesignerstepbystep.com/blog/SitePages/SharePoint%20versions.aspx
Best Regards,
Yumi Fu

Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running The backup file should be restored to a server with version '12.0.0.6318' or later.

am trying to restore the bak file into a new site collection in my sp 2010 standalone env.
am getting error
PS C:\Windows\system32> stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C:\mBKUPCOPY\Sharepoint_bankup.bak"
STSADM.EXE : Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running
the current version. The backup file should be restored to a server with version '12.0.0.6318' or later.
At line:1 char:1
+ stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C: ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Your backup is ...6318' or later.:String) [], RemoteException
+ FullyQualifiedErrorId : NativeCommandError

As stated in the other thread on this topic you can't restore a 2007 backup to 2010, it needs to be upgraded.
https://social.technet.microsoft.com/Forums/en-US/31c70f0a-5d89-4308-895b-af0c2b249114/restore-the-site-collection-from-moss-2007-to-sp-2010-site-collec?forum=sharepointadminprevious

How can I handle deploying multiple test systems on the same PC that have been developed using different versions of LabVIEW, TestStand, and/or Switch Executive?

The major issue here is that the test systems must be documented and validated before being released to the production floor. Given this if a test station has multiple test systems deployed on it that have been developed on various versions of LV, TS, and Switch exec how can I force the test system selected to use the correct versions of TS, LV, and Switch exec.? I understand that the solution would be to recomplie everything and bring them up to the latest version but that would then require re-validation according to the QA department. Any advice would be greatly appreciated.
It would be nice if theTS deployment was more like an LV executable... meaning when a LV executable is launched it always knows what LV runtime engine to use when there are multiple engines installed on a PC.

Hi,
Multiply versions of teststand can reside on the same system, but only one version can run at a time. They is a utility that has to be run to set the active version.
The SequenceFiles have a version number, and you will find an error will be generate if you try to Load the sequencefile in the wrong version of TestStand.
The labview VIs will only work providing the correct version of the RTE is also installed on your system, even a labview executabe requires the correct RTE to be installed, either as part of the executable installation or as a seperate installation, before the labview exe will work correctly.
I'm not fimilar with the Switch exec but I would expect that it will also require the correct lower level device drivers to be available for the version you are using.
Therefore, as you are indicating that some of your system are at a older version, its difficult to image how you could achive this, considering if you say you have different versions of the software(s). For a start, you may have the problem that newer code/ sequencefiles using additional functionatily not available in the older versions.
I would think your only solution would be to have different deployments covering the different versions you have, or at least bring all your test systems up to the same version of teststand.
Regards
Ray Farmer
Regards
Ray Farmer

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details?

Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)

If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return.

Using different templates for the desktop and phone versions of the same blog

I have a site which was created in Adobe Muse and is hosted on Business Catalyst.
I have created both a desktop and a phone versions of the site.
I want to know how I can integrate the blogs that I currently have on the desktop site with the phone version that I just did, using different templates for the desktop and phone versions of the same blog. This is in order to ensure that visitors to the blogs on the website are directed to the templates that render correctly for the devices they are using.
My current approach has been to create both a desktop and phone versions of the blogs. The problem with this however, is that the dates are different and the comments are separated between the two blog versions!
I have also tried enabling mobile templates in BC, but still couldn't find a way to specify the mobile versions of the templates for the same blog?
To recap my problem, I basically need a solution where the same blog uses different templates for desktop and mobile (both templates use different navigation headings and menu styles)
Thanks.

There can be few reason for this, including page contents links or contents used in phone/tablet version.
Please provide the site url , also try to publish the site as a trial site in Business Catalyst with all layouts which would help to isolate the issue.
Thanks,
Sanjit

Different versions of Adobe Creative Suite Compatibility (CS5 and CS5.5)

Our marketing team has two different versions of Adobe Creative Suite (CS5 and CS5.5). We can save the CS5.5 down to an IDML document so users with CS5 can open/manipulate the file but it reduces the file size significantly. What I do not know is if this saving down process reduces the quality of the file?? I am relatively inexperienced with these programs as I am self-taught. Thanks for your help!

IDML is good for repairing files.
But IDML is not good to be used as exchange in a workflow because every export of IDML can change things in an unexpected way. So I would strongly recommend that everyone in the department involved in the workflow uses the very same version, anything else will let you struggle in a later point of time. When I have to exchange files with a client I use always their versions and avoid IDML in exchanging files in any case possible.
Between CS5.0 and 5.5 are also several changes possible, because some bugs related to the text engine became fixed. E.g. in CS5 if you had an automatic TOC or cross reference in a text frame with 1 or 3 round corners and 3 or 1 normal corners, automatic number got shuffled in that frame, like page 345 became 543. When this was fixed some changes in the text engine have been done.

Currently running Adobe XI Standard, i have a PDF that i Save As excel however on my computer it converts it differently than my coworkers computer who has the same Adobe version and same version of Excel 2010. Is something different selected on mine than

Currently running Adobe XI Standard, i have a PDF that i Save As excel however on my computer it converts it differently than my coworkers computer who has the same Adobe version and same version of Excel 2010. Is something different selected on mine than his? How can i troubleshoot?
Can provide more information if needed...

Hello nmohamm,
To examine the conversion settings in Acrobat, do the following:
1. Select Edit > Preferences
2. In the preferences dialog, select the "Convert From PDF" category.
3. In the "Converting From PDF" list, select "Excel workbook".
4. Click the "Edit Settings" button to view your conversion settings.
Regards,
Charlene

PDF file displays different number of text blocks in Acrobat Pro CC 2014 and CS6 versions

Hi,
I've inherited a file at work that displays different numbers of text blocks, depending on the version of Acrobat Pro used to view the file. Here's the specific issue:
As viewed in CC 2014:
"Chapter 1 - Chapter One Title": Appears as two text blocks -- one for "Chapter 1 - " and one for "Chapter One Title"
As viewed in CS 6:
"Chapter 1 - Chapter One Title": Appears as a single text block -- "Chapter 1 - Chapter One Title"
This occurs only with regard to single-digit chapter numbers that are whole numbers. So:
Chapter 1, Chapter 5, and Chapter 7 entries appear as two blocks in CC 2014, one block in CS6.
Chapter 2.0, Chapter 6.1, Chapter 10, entries appear in single blocks in both CC 2014 and CS6.
The PDF file was created -- I believe -- through the save-to-PDF feature in Word 2010.
Any idea what's happening here?
Thanks.
David

First of all, there is no such thing as Acrobat CS6 or Acrobat CC 2014. We assume you are referring to Acrobat X and Acrobat XI respectively.
Secondly, how are you determining how many text blocks are in the PDF file? By use of the text touchup/edit function in Acrobat? If so, how this edit function displays text doesn't necessarily correspond to the actually underlying text fragments in the PDF file. In fact, sometimes it combines fragments based on heuristics. Those heuristics have varied with different version of Acrobat.
PDF as a file format doesn't know the context of the graphical objects such as text. There is no concept of a line, a sentence, a paragraph, a column, etc. in terms of text. Runs of text are context-insensitive. You will get “breaks” when switching between regular and italics or when unusual paragraph justification is involved.
Is the actual problem in trying to edit the text or something else?
If you post a file, and indicate what text we should look at, we can confirm what is actually going on in your file.
- Dov

Zmg and different version of ZCM?

Similar Messages

Maybe you are looking for