Zone install file system failed?
On the global zone, my /opt file system is like this:
/dev/dsk/c1t1d0s3 70547482 28931156 40910852 42% /opt
I am trying to install it in NMSZone1 like this config:
fs:
dir: /opt
special: /dev/dsk/c1t1d0s3
raw: /dev/rdsk/c1t1d0s3
type: ufs
options: [nodevices,logging]
But failed like this:
bash-2.05b# zoneadm -z NMSZone1 boot
zoneadm: zone 'NMSZone1': fsck of '/dev/rdsk/c1t1d0s3' failed with exit status 3
3; run fsck manually
zoneadm: zone 'NMSZone1': unable to get zoneid: Invalid argument
zoneadm: zone 'NMSZone1': unable to destroy zone
zoneadm: zone 'NMSZone1': call to zoneadmd failed
Please help me. Thanks.
It appears that the c1t1d0s3 device is already in use as /opt in the
global zone. Is that indeed the case? If so, you need to unmount
it from there (and remove or comment out its entry in the global
zone's /etc/vfstab) file and then try booting the zone again.
Similar Messages
-
Service for network file system fails to install
Installation of the File Service and Service for NFS in Windows 2008 R2 server fails. Following are the steps used to perform the install.
Open Server Manager from Start> All Programs> Administrative Tools> Server Manager.
Click on the Roles node in the left pane, and then click the
Add Roles link.
On the Add Roles Wizard welcome page, click Next to continue.
From the list of roles to install, select File Services, and click
Next to continue.
On the Introduction to File Services page, click Next to continue.
On the Select Role Services page, keep the File Server box checked and select
Services for Network File System. Click Next to continue.
On the Confirmation page, review the settings and click the Install button.
Click Close when the wizard completes.
ServerManager Log:
From the ServerManager.log file under C:/Windows/Logs I can see the below.
2272: 2013-02-12 16:13:51.479 [CBS] IsCacheStillGood: True.
2272: 2013-02-12 16:14:05.534 [Provider] System changed since last refresh: False
2272: 2013-02-12 16:15:45.816 [InstallationProgressPage] Loading progress page...
2272: 2013-02-12 16:15:45.831 [InstallationProgressPage] Begining Sync operation...
2272: 2013-02-12 16:15:45.842 [Sync]
Sync Graph of changed nodes
==========
name : File Services
state : Changed
rank : 1
sync tech: CBS
guest[1] : File Server
guest[2] : Distributed File System
guest[3] : File Server Resource Manager
guest[4] : Services for Network File System
guest[5] : Single Instance Storage
guest[6] : Windows Search Service
guest[7] : Windows Server 2003 File Services
guest[8] : BranchCache for network files
provider : FileServerRoleProvider
name : Services for Network File System
state : Changed
rank : 2
sync tech: CBS
provider : FileServerRoleProvider
name : File Server
state : Changed
rank : 2
sync tech: CBS
provider : FileServerRoleProvider
2272: 2013-02-12 16:15:45.842 [Sync] Calling sync provider of Services for Network File System ...
2272: 2013-02-12 16:15:45.843 [FileServer] Sync:: guest: 'Services for Network File System', guest deleted?: False
2272: 2013-02-12 16:15:45.843 [FileServer] Begin installation of 'Services for Network File System'...
2272: 2013-02-12 16:15:45.843 [FileServer] Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
2272: 2013-02-12 16:15:45.843 [FileServer] Installation queued for 'Services for Network File System'.
2272: 2013-02-12 16:15:45.843 [Sync] Calling sync provider of File Server ...
2272: 2013-02-12 16:15:45.843 [FileServer] Sync:: guest: 'File Server', guest deleted?: False
2272: 2013-02-12 16:15:45.843 [FileServer] Begin installation of 'File Server'...
2272: 2013-02-12 16:15:45.843 [FileServer] Install: Guest: 'File Server', updateElement: 'CoreFileServer'
2272: 2013-02-12 16:15:45.843 [FileServer] Installation queued for 'File Server'.
2272: 2013-02-12 16:15:45.844 [CBS] installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure
NFS-Administration ServerForNFS-Infrastructure CoreFileServer ' ...
2272: 2013-02-12 16:15:46.315 [CBS] ...parents that will be auto-installed: '<none>'
2272: 2013-02-12 16:15:46.316 [CBS] ...default children to turn-off: '<none>'
2272: 2013-02-12 16:15:46.325 [CBS] ...current state of 'ServicesForNFS-ServerAndClient': p:
Staged, a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.325 [CBS] ...setting state of 'ServicesForNFS-ServerAndClient' to
'InstallRequested'
2272: 2013-02-12 16:15:46.335 [CBS] ...current state of 'ClientForNFS-Infrastructure': p: Staged,
a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.336 [CBS] ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
2272: 2013-02-12 16:15:46.345 [CBS] ...current state of 'NFS-Administration': p: Staged, a:
Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.345 [CBS] ...setting state of 'NFS-Administration' to 'InstallRequested'
2272: 2013-02-12 16:15:46.354 [CBS] ...current state of 'ServerForNFS-Infrastructure': p: Staged,
a: Staged, s: UninstallRequested
2272: 2013-02-12 16:15:46.354 [CBS] ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
2272: 2013-02-12 16:15:46.363 [CBS] ...current state of 'CoreFileServer': p: Staged, a: Staged,
s: UninstallRequested
2272: 2013-02-12 16:15:46.363 [CBS] ...setting state of 'CoreFileServer' to 'InstallRequested'
2272: 2013-02-12 16:15:46.373 [CBS] ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
2272: 2013-02-12 16:15:46.390 [CBS] ...'ClientForNFS-Infrastructure' : applicability: Applicable
2272: 2013-02-12 16:15:46.408 [CBS] ...'NFS-Administration' : applicability: Applicable
2272: 2013-02-12 16:15:46.426 [CBS] ...'ServerForNFS-Infrastructure' : applicability: Applicable
2272: 2013-02-12 16:15:46.435 [CBS] ...'CoreFileServer' : applicability: Applicable
2272: 2013-02-12 16:15:46.493 [CbsUIHandler] Initiate:
2272: 2013-02-12 16:15:46.494 [InstallationProgressPage] Installing...
2272: 2013-02-12 16:15:51.958 [CbsUIHandler] Error: -2147021879 :
2272: 2013-02-12 16:15:51.958 [CbsUIHandler] Terminate:
2272: 2013-02-12 16:15:52.035 [InstallationProgressPage] Verifying installation...
2272: 2013-02-12 16:15:52.049 [CBS] ...done installing 'ServicesForNFS-ServerAndClient
ClientForNFS-Infrastructure NFS-Administration ServerForNFS-Infrastructure CoreFileServer '.
Status: -2147021879 (80070bc9)
2272: 2013-02-12 16:15:52.052 [FileServer] Skipped configuration of 'Services for Network File System' because install operation failed.
2272: 2013-02-12 16:15:52.053 [FileServer] Skipped configuration of 'File Server' because install operation failed.
2272: 2013-02-12 16:15:52.053 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
'Services for Network File System',
'File Server'[STAT] installation(s) took '6.2058637' second(s) total.
[STAT] Configuration(s) took '0.0002143' second(s) total.
[STAT] Total time: '6.206078' second(s).
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
is required to roll back changes made
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 255
2272: 2013-02-12 16:15:52.053 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot
is required to roll back changes made
2272: 2013-02-12 16:15:52.054 [InstallationProgressPage] Sync operation completed
2272: 2013-02-12 16:15:52.054 [InstallationProgressPage] Performing post install/uninstall discovery...
2272: 2013-02-12 16:15:52.056 [Provider] C:\Windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
2272: 2013-02-12 16:15:52.056 [CBS] IsCacheStillGood: False.
2272: 2013-02-12 16:15:52.526 [CBS] >>>GetUpdateInfo--------------------------------------------------
2272: 2013-02-12 16:15:59.342 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed:
80070bc9 (-2147021879)
2272: 2013-02-12 16:15:59.342 [CBS] <<<GetUpdateInfo--------------------------------------------------
2272: 2013-02-12 16:15:59.380 [DISCOVERY] hr: -2147021879 -> reboot required.
2272: 2013-02-12 16:15:59.390 [InstallationProgressPage] About to load finish page...
2272: 2013-02-12 16:15:59.390 [InstallationFinishPage] Loading finish page
2272: 2013-02-12 16:15:59.401 [InstallationFinishPage] Finish page loaded
In Windows Event long I can see the following events logged:
Event 3002, Port Map:
Windows(R) failed a request to register RPC Port Mapper on TCP port 111. RPC Port Mapper cannot start.
Network File System (NFS) clients use RPC Port Mapper (also known as Portmap and Rpcbind) to discover NFS protocols on remote servers. Without RPC Port Mapper, Server for NFS
cannot start and NFS clients cannot access files on this server.
Verify that no other software is registered on TCP port 111, then start Server for NFS manually (which will also start RPC Port Mapper).
Event 7000, Service Control Manager:
The Server for NFS Open RPC (ONCRPC) Portmapper service failed to start due to the following error:
A device attached to the system is not functioning.
Event 7001, Service Control Manager:
The Server for NFS Driver service depends on the Server for NFS Open RPC (ONCRPC) Portmapper service which failed to start because of the following error:
A device attached to the system is not functioning.
Event 7001, Service Control Manager:
The Server for NFS service depends on the Server for NFS Driver service which failed to start because of the following error:
The dependency service or group failed to start.
Based on a technet forum I have already checked and made sure there is no other service running on port 111 (command used is netstat -a -b -o).
Dependent Service Status:
During the installation process “Client for NFS” seems to have gone well and the service started successfully. But the “Server for NFS” failed, when checked for the status of the dependent process “portmap” service failed to start with the WIN32_EXIT_CODE
“31 (0x1f)”. Please find below the query result.
C:\Users\CMMAdmin>sc query rpcxdr
SERVICE_NAME: rpcxdr
TYPE : 1 KERNEL_DRIVER
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\Users\CMMAdmin>sc query msnfsflt
SERVICE_NAME: msnfsflt
TYPE : 2 FILE_SYSTEM_DRIVER
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\Users\CMMAdmin>sc query portmap
SERVICE_NAME: portmap
TYPE : 1 KERNEL_DRIVER
STATE : 1 STOPPED
WIN32_EXIT_CODE : 31 (0x1f)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
C:\Users\CMMAdmin>
As the EXIT CODE is 31 ( A device attached to the system is not functioning), I have checked device manager and made sure there is no yellow warning shown against any hardware device. Further I am not sure how to proceed and debug this issue.
Please let me know if you have any suggestion on how debug this issue further.
Thanks
-PoopeshHey,
I had this same problem running MS Server 2008 R2 and server log is as follow:
name : Services for Network File System
state : Changed
rank : 2
sync tech: CBS
ant. : empty
pred. : File Services
provider : FileServerRoleProvider
5676: 2014-01-14 14:08:57.474 [Sync] Calling sync provider of Services for Network File System ...
5676: 2014-01-14 14:08:57.521 [FileServer] Sync:: guest: 'Services for Network File System', guest deleted?: False
5676: 2014-01-14 14:08:57.536 [FileServer] Begin installation of 'Services for Network File System'...
5676: 2014-01-14 14:08:57.536 [FileServer] Install: Guest: 'Services for Network File System', updateElement: 'ServicesForNFS-ServerAndClient;ClientForNFS-Infrastructure;NFS-Administration;ServerForNFS-Infrastructure'
5676: 2014-01-14 14:08:57.536 [FileServer] Installation queued for 'Services for Network File System'.
5676: 2014-01-14 14:08:57.536 [CBS] installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
ServerForNFS-Infrastructure ' ...
5676: 2014-01-14 14:09:00.173 [CBS] ...parents that will be auto-installed: '<none>'
5676: 2014-01-14 14:09:00.173 [CBS] ...default children to turn-off: '<none>'
5676: 2014-01-14 14:09:00.204 [CBS] ...current state of 'ServicesForNFS-ServerAndClient': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.204 [CBS] ...setting state of 'ServicesForNFS-ServerAndClient' to 'InstallRequested'
5676: 2014-01-14 14:09:00.235 [CBS] ...current state of 'ClientForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.235 [CBS] ...setting state of 'ClientForNFS-Infrastructure' to 'InstallRequested'
5676: 2014-01-14 14:09:00.266 [CBS] ...current state of 'NFS-Administration': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.266 [CBS] ...setting state of 'NFS-Administration' to 'InstallRequested'
5676: 2014-01-14 14:09:00.282 [CBS] ...current state of 'ServerForNFS-Infrastructure': p: Staged, a: Staged, s: UninstallRequested
5676: 2014-01-14 14:09:00.282 [CBS] ...setting state of 'ServerForNFS-Infrastructure' to 'InstallRequested'
5676: 2014-01-14 14:09:00.313 [CBS] ...'ServicesForNFS-ServerAndClient' : applicability: Applicable
5676: 2014-01-14 14:09:00.360 [CBS] ...'ClientForNFS-Infrastructure' : applicability: Applicable
5676: 2014-01-14 14:09:00.422 [CBS] ...'NFS-Administration' : applicability: Applicable
5676: 2014-01-14 14:09:00.469 [CBS] ...'ServerForNFS-Infrastructure' : applicability: Applicable
5676: 2014-01-14 14:09:01.624 [CbsUIHandler] Initiate:
5676: 2014-01-14 14:09:01.624 [InstallationProgressPage] Installing...
5676: 2014-01-14 14:09:35.117 [CbsUIHandler] Error: -2147021879 :
5676: 2014-01-14 14:09:35.117 [CbsUIHandler] Terminate:
5676: 2014-01-14 14:09:41.170 [InstallationProgressPage] Verifying installation...
5676: 2014-01-14 14:09:41.264 [CBS] ...done installing 'ServicesForNFS-ServerAndClient ClientForNFS-Infrastructure NFS-Administration
ServerForNFS-Infrastructure '. Status: -2147021879 (80070bc9)
5676: 2014-01-14 14:09:41.279 [FileServer] Skipped configuration of 'Services for Network File System' because install operation failed.
5676: 2014-01-14 14:09:41.279 [Provider]
[STAT] ---- CBS Session Consolidation -----
[STAT] For
'Services for Network File System'[STAT] installation(s) took '43.7368586' second(s) total.
[STAT] Configuration(s) took '0.0062843' second(s) total.
[STAT] Total time: '43.7431429' second(s).
5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Result - Success: False, RebootRequired: True, Id: 105
5676: 2014-01-14 14:09:41.279 [Provider] Error (Id=0) Sync Message - OperationKind: Install, MessageType: Error, MessageCode: -2147021879, Message: <null>, AdditionalMessage: The requested operation failed. A system reboot is required to roll back changes
made
5676: 2014-01-14 14:09:41.279 [InstallationProgressPage] Sync operation completed
5676: 2014-01-14 14:09:41.279 [InstallationProgressPage] Performing post install/uninstall discovery...
5676: 2014-01-14 14:09:41.295 [Provider] C:\windows\system32\ServerManager\Cache\CbsUpdateState.bin does not exist.
5676: 2014-01-14 14:09:41.295 [CBS] IsCacheStillGood: False.
5676: 2014-01-14 14:09:43.900 [CBS] >>>GetUpdateInfo--------------------------------------------------
5676: 2014-01-14 14:09:57.394 [CBS] Error (Id=0) Function: 'ReadUpdateInfo()->Update_GetInstallState' failed: 80070bc9 (-2147021879)
5676: 2014-01-14 14:09:57.410 [CBS] <<<GetUpdateInfo--------------------------------------------------
5676: 2014-01-14 14:09:57.488 [DISCOVERY] hr: -2147021879 -> reboot required.
5676: 2014-01-14 14:09:57.613 [InstallationProgressPage] About to load finish page...
5676: 2014-01-14 14:09:57.628 [InstallationFinishPage] Loading finish page
5676: 2014-01-14 14:09:57.644 [InstallationFinishPage] Finish page loaded
My solution was to run netstat -ano to identify what process was running on port TCP/UDP :111, then with the command tasklist I got PID matching with the task name. Once identified I stopped the process, rebooted and installed
the NFS service. On top of that, before installing NFS services I disabled firewall and antivirus. It worked fine for me. I hope this will be usefull for you. By the way, don't forget to enable all process back!
Have a good one! -
Verication file system failed to make partition
I can't make a partition verification file system failed
Hello,
In Disk Utility, try Repair Disk first, you need another boot drive or the Install Disc if this is trying on your Boot Drive.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
"checking file systems failed", remount results in booting again
The other day my system totally hung (doing something with eclipse & grails). After waiting a while, I rebooted.
Of course filesystems wasn't unmounted cleanly so during boot I got the message from the subject.
Besides that the instruction to mount read/write again:
mount -n -o remount,rw /
However this command immediately is finished. Then typing exit should result in a reboot. However it displays briefly "device busy". So the remounting thing doesn't work.
No I cannot back into Arch anymore.
Am I doomed to use the XP boot option for ever?rieger wrote:
thanks but:
I executed fsck.ext /dev/sda5 and it return with:
"SegmenationFault"
nothing more....
help
From a live cd? Try another live cd or reboot the computer, sometimes I get segfaults when something got wrong in my ram and a reboot fixes that. -
New zone and inherited file system mount point error
Hi - would anyone be able to help with the following error please. I've tried to create a new zone that has the following inherited file system:
inherit-pkg-dir:
dir: /usr/local/var/lib/sudo
But when I try to install it fails with:
root@tdukunxtest03:~ 532$ zoneadm -z tdukwbprepz01 install
A ZFS file system has been created for this zone.
Preparing to install zone <tdukwbprepz01>.
ERROR: cannot create zone <tdukwbprepz01> inherited file system mount point </export/zones/tdukwbprepz01/root/usr/local/var/lib>
ERROR: cannot setup zone <tdukwbprepz01> inherited and configured file systems
ERROR: cannot setup zone <tdukwbprepz01> file systems inherited and configured from the global zone
ERROR: cannot create zone boot environment <tdukwbprepz01>
I've added this because unknown to me when I installed sudo from sunfreeware in the global it requires access to /usr/local/var/lib/sudo - sudo itself installs in /usr/local. And when I try to run any sudo commands in the new zone it gave this:
sudo ls
Password:
sudo: Can't open /usr/local/var/lib/sudo/tdgrunj/8: Read-only file system
Thanks - Julian.Think I've just found the answer to my problem, I'd already inherited /usr ..... and as sudo from freeware installs in /usr/local I guess this is never going to work. I can only think to try the sudo version of the Solaris companion DVD or whatever it's called.
-
Best practices for ZFS file systems when using live upgrade?
I would like feedback on how to layout the ZFS file system to deal with files that are constantly changing during the Live Upgrade process. For the rest of this post, lets assume I am building a very active FreeRadius server with log files that are constantly updating and must be preserved in any boot environment during the LU process.
Here is the ZFS layout I have come up with (swap, home, etc omitted):
NAME USED AVAIL REFER MOUNTPOINT
rpool 11.0G 52.0G 94K /rpool
rpool/ROOT 4.80G 52.0G 18K legacy
rpool/ROOT/boot1 4.80G 52.0G 4.28G /
rpool/ROOT/boot1/zones-root 534M 52.0G 20K /zones-root
rpool/ROOT/boot1/zones-root/zone1 534M 52.0G 534M /zones-root/zone1
rpool/zone-data 37K 52.0G 19K /zones-data
rpool/zone-data/zone1-runtime 18K 52.0G 18K /zones-data/zone1-runtimeThere are 2 key components here:
1) The ROOT file system - This stores the / file systems of the local and global zones.
2) The zone-data file system - This stores the data that will be changing within the local zones.
Here is the configuration for the zone itself:
<zone name="zone1" zonepath="/zones-root/zone1" autoboot="true" bootargs="-m verbose">
<inherited-pkg-dir directory="/lib"/>
<inherited-pkg-dir directory="/platform"/>
<inherited-pkg-dir directory="/sbin"/>
<inherited-pkg-dir directory="/usr"/>
<filesystem special="/zones-data/zone1-runtime" directory="/runtime" type="lofs"/>
<network address="192.168.0.1" physical="e1000g0"/>
</zone>The key components here are:
1) The local zone / is shared in the same file system as global zone /
2) The /runtime file system in the local zone is stored outside of the global rpool/ROOT file system in order to maintain data that changes across the live upgrade boot environments.
The system (local and global zone) will operate like this:
The global zone is used to manage zones only.
Application software that has constantly changing data will be installed in the /runtime directory within the local zone. For example, FreeRadius will be installed in: /runtime/freeradius
During a live upgrade the / file system in both the local and global zones will get updated, while /runtime is mounted untouched in whatever boot environment that is loaded.
Does this make sense? Is there a better way to accomplish what I am looking for? This this setup going to cause any problems?
What I would really like is to not have to worry about any of this and just install the application software where ever the software supplier sets it defaults to. It would be great if this system somehow magically knows to leave my changing data alone across boot environments.
Thanks in advance for your feedback!
--JasonHello "jemurray".
Have you read this document? (page 198)
http://docs.sun.com/app/docs/doc/820-7013?l=en
Then the solution is:
01.- Create an alternate boot enviroment
a.- In a new rpool
b.- In the same rpool
02.- Upgrade this new enviroment
03.- Then I've seen that you have the "radious-zone" in a sparse zone (it's that right??) so, when you update the alternate boot enviroment you will (at the same time) upgrading the "radious-zone".
This maybe sound easy but you should be carefull, please try this in a development enviroment
Good luck -
MeetingPlace server file system crash!!!
Hi TAC ,
My customer to restart the server, at this time server tip read file system failed in that stop…… The server crashed . Do you have restore the file system idea? Similar CM recovery DVD image?? Please help !!~~~~
Thanks
Bin Yao869650 wrote:
Hi,
We do a backup of the our BI production server every night (OBIEE 11.1.1.6.2 BI1)
The process we follow is:
1. Stop BI Services
2. Weblogic (incluedes Node Manager, Weblogic and others)
After every stop of weblogic, there is a file get created under WLS_Home/instances/instance1 and the file is like core.xxxxx ( e.g. core_31176, core_19440).
My questions regarding these files are:
1. What is the use of these files?
2. Can I delete them (Depends on the answer of the above question)?
3. Is it possible to control not to create these files (if they are not useful)?
Thanks in advance.
KiranCheck this thread: CORE.xxxx big file... What is it?
It sounds like it is safe to remove those file's unless you need to debug any weblogic issues.
Please mark correct or helpful if answered.
Thanks,
-A.Y -
OS X could not be installed on your computer File system verify or repair failed
Downloaded OS X Yosemite update through Apple Store and attempted to install it on my mom's 2013 21" iMac running OS X 10.9.5.
However, a few minutes into the process I received this message:
OS X could not be installed on your computer
File system verify or repair failed. Quit the installer to restart your computer and try again.
Tried restarting several times to no avail. Ran disk utility and saw:
Invalid node structure.
File system check exit code is 8.
Error: This disk needs to be repaired.
Repair disk button not available for Mac HD, but is available for 1TB Apple HDD. Is there any way to abort the OS X Yosemite installation?TThe Disk Utility cannot repair the disk it resides on. The way I get around this is to use an external hard disk as my startup disk and run did utility from that. Most time then the primary disk on your iMac can be repaired.
-
Flash install fails hdutil: attach failed no mountable file systems
I've tried all suggested trouble tips to install the latest Flash 11. Dowload completes but install fails with:
hdutil: attach failed - no mountable file systems.
I have unistalled all prior flash files. Flash works OK in Chrome (it is built in and does not require a plug-in) but can't install using either Safari or Firefox. Same result in each case.Adobe Flash Player Troubleshooting
Adobe Flash Player Troubleshooting (2) -
Error phase Install Common system files SAP NW 7.1
Hello
I have a problem in my installation of SAP NW 7.1 for PI
I was installating the SAP NW but I stopped it and deleled this system (SID=TPI), then I started again the installation (SID=PI1) but in the phase Install Common System Files i got this message:
sapint_dev.log
CJSlibModule::writeInfo_impl()
File system node C:/WINDOWS/TEMP exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
CJSlibModule::writeInfo_impl()
File system node D:/usr/sap exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
CJSlibModule::writeInfo_impl()
Creating SAP system shares for PI1...
WARNING[E] 2010-07-09 17:30:13.921 [ianxbservi.hpp:244]
CServiceHandle::Open(ClusSvc)
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
WARNING[E] 2010-07-09 17:30:14.109
CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
WARNING[E] 2010-07-09 17:30:14.171
CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
ERROR 2010-07-09 17:30:14.234 [sixxcstepexecute.cpp:984]
FCO-00011 The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
WARNING 2010-07-09 17:30:14.437 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2010-07-09 17:30:14.437 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
INFO 2010-07-09 17:30:45.921 [sixxcstepexecute.cpp:1072]
An error occured and the user decided to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories".
INFO 2010-07-09 17:30:48.640 [synxccuren.cpp:1016]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS)
lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW71/INSTALL/SYSTEM/MSS/STD/AS.
LOG sapint.log
INFO 2010-07-09 17:30:13.296
Execute step createFirstSystemDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0
INFO 2010-07-09 17:30:13.750
File system node C:/WINDOWS/TEMP exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
File system node D:/usr/sap exists already. Nothing to do.
INFO 2010-07-09 17:30:13.765
Creating SAP system shares for PI1...
WARNING[E] 2010-07-09 17:30:13.921
FSL-06002 Error 1060 (The specified service does not exist as an installed service.
) in execution of a 'OpenService' function, line (267), with parameter (ClusSvc).
WARNING[E] 2010-07-09 17:30:14.109
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
WARNING[E] 2010-07-09 17:30:14.171
CJS-30129 Creating node $(DIR_CCMS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
pgspi\saploc\ with type DIRECTORY: can't create parent node...
ERROR 2010-07-09 17:30:14.234
FCO-00011 The step createFirstSystemDirectories with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_System|ind|ind|ind|ind|5|0|createFirstSystemDirectories was executed with status ERROR .
WARNING 2010-07-09 17:30:14.437
Could not get property IDs of the JavaScript object.
ERROR 2010-07-09 17:30:14.437
FJS-00010 Could not get value for property
I had found information about saploc however still I got the same
The installation is on Windows 2003 + Sql 2005
Any suggestion for this problem
Thanks
DannyHello
I deleted the system with the wizard on sapinst
NetWeaver Process Integration 7.1 Software Life-Cycle Options Uninstall Uninstall ‒ SAP systems or
single instances .
Danny
Edited by: Danny Sanchez on Jul 12, 2010 4:17 PM -
I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.
This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan -
I Downloaded the Yosemite upgrade and went to install it on my iMac. The install failed saying file System needed repair. Ran disk utility could do the verify but the repair button was grayed out. When I tried to change startup disk back it wouldn't let me , saying it couldn't gather enough file info. So I'm stuck and can't boot my Mac. How do I get out of this?
Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Try to reboot normally.
OS X Recovery
OS X Recovery (2) -
Control file creation failed while installing ---------R12 release 3
While installing R12 release 3 I am getting following error at the time of Step 2 0f 5
RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
following is summery of my server hardware
HDD capacity 146GB X 10 nos. ( RAID5 with 2 arrays)
8 GB RAM
Operating System is Red hat Linux Enterprise 4 with Update 5
Following are the HDD partition details
Boot 1GB
Root 50GB
Tem 12GB
SWAP 24GB distributed on two HDD partitions equally
Database and Application HDD portion size 500GB
I am refering Metalink note Note 402310.1 all the setting are correct
Following is kernel settings
kernel.sem = 256 32000 100 142
kernel.shmall = 2097152
kernel.shmmax = 4294967296 ( Half the size of the physical memory is 8GB )
kernel.shmmni = 4096
kernel.msgmax = 8192
kernel.msgmnb = 65536
kernel.msgmni = 2878
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
All the Pre-req.of installation are passing correctly
• glibc-2.3.4-2.25
• glibc-common-2.3.4-2.25
• binutils-2.15.92.0.2-21
• compat-libstdc++-296-2.96-132.7.2
• gcc-3.4.6-3
• gcc-c++-3.4.6-3
• libgcc-3.4.6-3
• libstdc++-3.4.6-3
• libstdc++-devel-3.4.6-3
• openmotif21-2.1.30-11.RHEL4.6**
• pdksh-5.2.14-30.3
• setarch-1.6-1
• make-3.80-6.EL4
• gnome-libs-1.4.1.2.90-44.1
• sysstat-5.0.5-11.rhel4
• compat-db-4.1.25-9
• control-center-2.8.0-12.rhel4.5
• xscreensaver-4.18-5.rhel4.11
• libaio-0.3.105-2
• libaio-devel-0.3.105-2
these all packeges are avalable on the server some are even are the higher version because OS is with update 5
Doen the installation 3 time with formating , but still facing same problem
All Groups and Users and permitions are correct
runProcess_3
Statusstring Configuring Database
Executing command: /stage/startCD/Disk1/rapidwiz/jre/Linux/1.5.0//bin/java -DCONTEXT_VALIDATED=true -mx512M -classpath /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar oracle.apps.ad.clone.ApplyDatabase -e /test/db/tech_st/10.2.0/appsutil/VIS_test.xml -stage /stage/startCD/Disk1/rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at /test/db/tech_st/10.2.0/appsutil/log/VIS_test/ApplyDatabase_08271904.log
| 0% completed
/ 0% completed
- 0% completed
\ 0% completed
| 0% completed
/ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
Cannot execute configure of database using RapidClone
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.Running Database Install Driver for VIS instance
Succesfully changed Permissions for /test/db/tech_st/10.2.0/appsutil/log/VIS_test
Processing DriverFile = /stage/startCD/Disk1/rapidwiz/template/adridb.drv
Running Instantiation Drivers for /stage/startCD/Disk1/rapidwiz/template/adridb.drv
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrun10g.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrun10g.sh
setting permissions: 755
setting ownership: oracle:dba
instantiate file:
source : /stage/startCD/Disk1/rapidwiz/template/adrundb.sh
dest : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
backup : /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh to /test/db/tech_st/10.2.0/appsutil/out/VIS_test/templbac/adrundb.sh
setting permissions: 755
setting ownership: oracle:dba
Step 0 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrun10g.sh
Step 1 of 5: Doing UNIX preprocessing
Processing Step 1 of 5
Step 1 of 5
Command: /test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh
Step 2 of 5: Doing UNIX preprocessing
Processing Step 2 of 5
Executing: su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh"
STARTED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:52 IST 2007
Preparing environment to install databases ...
Setting LD_LIBRARY_PATH to - /stage/startCD/Disk1/rapidwiz/lib/Linux -
Setting PATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
Setting CLASSPATH to - /stage/startCD/Disk1/rapidwiz/jlib/java:/stage/startCD/Disk1/rapidwiz/jlib/xmlparserv2.jar:/stage/startCD/Disk1/rapidwiz/jlib/ojdbc14.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/OraInstaller.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/ewt3.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/share.jar:/stage/startCD/Disk1/rapidwiz/jlib/oui/srvm.jar -
... installing VISION demo database
FINISHED INSTALL PHASE : DATABASE : Mon Aug 27 19:06:53 IST 2007
su oracle -c "/test/db/tech_st/10.2.0/temp/VIS_test/adrundb.sh" has succeeded
Succesfully changed Permissions for /test/db/tech_st/10.2.0/temp
===============================================================================
NetServiceHandler 120.13 started for test at Mon Aug 27 19:06:54 IST 2007
===============================================================================
[ Context Information ]
Host : test
Domain : apps.com
Out Dir : null
Tier Type : DATABASE TIER
Getting connection...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : test
sDbDomain : apps.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@test.apps.com:1531:VIS
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test.apps.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
java.lang.NoSuchFieldError: TDU
Please refer to the remaining logs on applications node at - /test/inst/apps/VIS_test/logs/08271731.log
Can Some one pls reply
Thanks and Regards,
AmolpromptUserForDiskPath Oracle Applications Rapid Install - RDBMS & Disk number = 1
Path Obtained by Instantiate File: /prod/stage/oraDB/Disk1 & Disk number = 1
Processing /prod/stage/oraDB/Disk1/dbts/driver/db102.drv file
================================================================
Processing the contents of : Disk1
Processing the driver file : /prod/stage/oraDB/Disk1/dbts/driver/Disk1.drv
UNZIPPING THE DISK1 CONTENTS
UNZIP used: UnZip 5.51 of 22 May 2004, by Info-ZIP. Maintained by C. Spieler. Send
Unzip0 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip at /test/db/tech_st/10.2.0/
Unzip0
.end std out.
.end err out.
Unzip0 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db58_opmn.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip1 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip1
.end std out.
.end err out.
Unzip1 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db74_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip2 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip at /test/db/tech_st/10.2.0/
Unzip2
.end std out.
.end err out.
Unzip2 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db26_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip5 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip at /test/db/tech_st/10.2.0/
Unzip5
.end std out.
.end err out.
Unzip5 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db23_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip6 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip at /test/db/tech_st/10.2.0/
Unzip6
.end std out.
.end err out.
Unzip6 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db29_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip3 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip at /test/db/tech_st/10.2.0/
Unzip3
.end std out.
.end err out.
Unzip3 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db22_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip4 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip at /test/db/tech_st/10.2.0/
Unzip4
.end std out.
.end err out.
Unzip4 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db9_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip8 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip at /test/db/tech_st/10.2.0/
Unzip8
.end std out.
.end err out.
Unzip8 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db24_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip9 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip at /test/db/tech_st/10.2.0/
Unzip9
.end std out.
.end err out.
Unzip9 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db27_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip7 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip at /test/db/tech_st/10.2.0/
Unzip7
.end std out.
.end err out.
Unzip7 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db25_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip12 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip12
.end std out.
.end err out.
Unzip12 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db73_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip13 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip at /test/db/tech_st/10.2.0/
Unzip13
.end std out.
.end err out.
Unzip13 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db11_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip14 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip at /test/db/tech_st/10.2.0/
Unzip14
.end std out.
.end err out.
Unzip14 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db37_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip10 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip at /test/db/tech_st/10.2.0/
Unzip10
.end std out.
.end err out.
Unzip10 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db20_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip17 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip17
.end std out.
.end err out.
Unzip17 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db62_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip15 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip15
.end std out.
.end err out.
Unzip15 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db54_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip16 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip at /test/db/tech_st/10.2.0/
Unzip16
.end std out.
.end err out.
Unzip16 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db42_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip11 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip at /test/db/tech_st/10.2.0/
Unzip11
.end std out.
.end err out.
Unzip11 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db19_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip20 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip at /test/db/tech_st/10.2.0/
Unzip20
.end std out.
.end err out.
Unzip20 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db8_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip19 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip19
.end std out.
.end err out.
Unzip19 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db1_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip21 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip at /test/db/tech_st/10.2.0/
Unzip21
.end std out.
.end err out.
Unzip21 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db33_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip18 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip at /test/db/tech_st/10.2.0/
Unzip18
.end std out.
.end err out.
Unzip18 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db40_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip22 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip22
.end std out.
.end err out.
Unzip22 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db72_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip23 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip at /test/db/tech_st/10.2.0/
Unzip23
.end std out.
.end err out.
Unzip23 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db35_jlib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip25 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip25
.end std out.
.end err out.
Unzip25 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db53_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip26 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip at /test/db/tech_st/10.2.0/
Unzip26
.end std out.
.end err out.
Unzip26 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db13_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip27 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip at /test/db/tech_st/10.2.0/
Unzip27
.end std out.
.end err out.
Unzip27 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db57_wf.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip24 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip24
.end std out.
.end err out.
Unzip24 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db0_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip29 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip at /test/db/tech_st/10.2.0/
Unzip29
.end std out.
.end err out.
Unzip29 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db36_jre.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip31 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip at /test/db/tech_st/10.2.0/
Unzip31
.end std out.
.end err out.
Unzip31 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db14_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip33 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip33
.end std out.
.end err out.
Unzip33 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db70_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip28 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip28
.end std out.
.end err out.
Unzip28 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db2_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip32 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip32
.end std out.
.end err out.
Unzip32 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db68_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip30 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip at /test/db/tech_st/10.2.0/
Unzip30
.end std out.
.end err out.
Unzip30 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db52_rdbms.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip34 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip34
.end std out.
.end err out.
Unzip34 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db64_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip37 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip37
.end std out.
.end err out.
Unzip37 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db76_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip36 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip36
.end std out.
.end err out.
Unzip36 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db90_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip35 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip at /test/db/tech_st/10.2.0/
Unzip35
.end std out.
.end err out.
Unzip35 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db44_md.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip40 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip40
.end std out.
.end err out.
Unzip40 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db80_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip41 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip at /test/db/tech_st/10.2.0/
Unzip41
.end std out.
.end err out.
Unzip41 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db21_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip42 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip at /test/db/tech_st/10.2.0/
Unzip43 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db49_nls.zip at /test/db/tech_st/10.2.0/
Unzip38 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip at /test/db/tech_st/10.2.0/
Unzip38
.end std out.
.end err out.
Unzip38 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db31_inventory.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip39 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip39
.end std out.
.end err out.
Unzip39 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db3_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip44 - Start of native unzipping /prod/stage/oraDB/Disk1/dbts/stage/db28_javavm.zip at /test/db/tech_st/10.2.0/
Unzip42
.end std out.
.end err out.
Unzip42 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk1/dbts/stage/db30_javavm.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk2
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk2
Processing the driver file : /prod/stage/oraDB/Disk2/dbts/driver/Disk2.drv
UNZIPPING THE DISK2 CONTENTS
Unzip45 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip45
.end std out.
.end err out.
Unzip45 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db60_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip46 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip46
.end std out.
.end err out.
Unzip46 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db59_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip47 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip47
.end std out.
.end err out.
Unzip47 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db61_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip50 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip50
.end std out.
.end err out.
Unzip50 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db63_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip48 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip at /test/db/tech_st/10.2.0/
Unzip48
.end std out.
.end err out.
Unzip48 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db39_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip49 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip49
.end std out.
.end err out.
Unzip49 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db65_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip51 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip51
.end std out.
.end err out.
Unzip51 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db89_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip52 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip52
.end std out.
.end err out.
Unzip52 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db77_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip57 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip57
.end std out.
.end err out.
Unzip57 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db69_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip55 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip55
.end std out.
.end err out.
Unzip55 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db81_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip53 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip53
.end std out.
.end err out.
Unzip53 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db75_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip56 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip56
.end std out.
.end err out.
Unzip56 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db83_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip58 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip58
.end std out.
.end err out.
Unzip58 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db71_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip54 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip54
.end std out.
.end err out.
Unzip54 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db79_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip61 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip61
.end std out.
.end err out.
Unzip61 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db67_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip60 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip60
.end std out.
.end err out.
Unzip60 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db87_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip62 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip at /test/db/tech_st/10.2.0/
Unzip62
.end std out.
.end err out.
Unzip62 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db48_network.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip63 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip at /test/db/tech_st/10.2.0/
Unzip63
.end std out.
.end err out.
Unzip63 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db50_oui.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip59 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip59
.end std out.
.end err out.
Unzip59 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db85_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip at /test/db/tech_st/10.2.0/
Unzip64 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db32_jdk.zip at /test/db/tech_st/10.2.0/
Unzip66 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip at /test/db/tech_st/10.2.0/
Unzip67 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db10_bin.zip at /test/db/tech_st/10.2.0/
Unzip68 - Start of native unzipping /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip at /test/db/tech_st/10.2.0/
Unzip68
.end std out.
.end err out.
Unzip68 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db16_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip66
.end std out.
.end err out.
Unzip66 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db7_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip65
.end std out.
.end err out.
Unzip65 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk2/dbts/stage/db4_appsutil.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
Processing disk file : disk.label in /prod/stage/oraDB/Disk3
Checking the content :disk.label
All contents are valid.....
=============================================================
Processing the contents of : Disk3
Processing the driver file : /prod/stage/oraDB/Disk3/dbts/driver/Disk3.drv
UNZIPPING THE DISK3 CONTENTS
Unzip71 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip71
.end std out.
.end err out.
Unzip71 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db84_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip73 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip73
.end std out.
.end err out.
Unzip73 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db66_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip69 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip at /test/db/tech_st/10.2.0/
Unzip69
.end std out.
.end err out.
Unzip69 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db55_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip72 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip72
.end std out.
.end err out.
Unzip72 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db47_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip70 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip at /test/db/tech_st/10.2.0/
Unzip70
.end std out.
.end err out.
Unzip70 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db56_sysman.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip78 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip78
.end std out.
.end err out.
Unzip78 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db86_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip74 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip74
.end std out.
.end err out.
Unzip74 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db45_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip76 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip at /test/db/tech_st/10.2.0/
Unzip76
.end std out.
.end err out.
Unzip76 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db34_jdk.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip79 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip79
.end std out.
.end err out.
Unzip79 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db78_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip81 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip at /test/db/tech_st/10.2.0/
Unzip81
.end std out.
.end err out.
Unzip81 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db6_assistants.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip82 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip at /test/db/tech_st/10.2.0/
Unzip82
.end std out.
.end err out.
Unzip82 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db18_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip83 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip at /test/db/tech_st/10.2.0/
Unzip83
.end std out.
.end err out.
Unzip83 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db51_perl.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip84 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip at /test/db/tech_st/10.2.0/
Unzip84
.end std out.
.end err out.
Unzip84 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db41_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip85 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip at /test/db/tech_st/10.2.0/
Unzip85
.end std out.
.end err out.
Unzip85 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db12_bin.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip86 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip at /test/db/tech_st/10.2.0/
Unzip86
.end std out.
.end err out.
Unzip86 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db15_ctx.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip87 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip at /test/db/tech_st/10.2.0/
Unzip87
.end std out.
.end err out.
Unzip87 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db38_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip80 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip80
.end std out.
.end err out.
Unzip80 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db88_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip77 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip at /test/db/tech_st/10.2.0/
Unzip77
.end std out.
.end err out.
Unzip77 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db46_oc4j.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip75 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip at /test/db/tech_st/10.2.0/
Unzip75
.end std out.
.end err out.
Unzip75 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db17_demo.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip89 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip at /test/db/tech_st/10.2.0/
Unzip88 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip at /test/db/tech_st/10.2.0/
Unzip90 - Start of native unzipping /prod/stage/oraDB/Disk3/dbts/stage/db5_assistants.zip at /test/db/tech_st/10.2.0/
Unzip89
.end std out.
.end err out.
Unzip89 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db43_lib.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..Unzip88
.end std out.
.end err out.
Unzip88 - Completed native unzipping unzip -qn /prod/stage/oraDB/Disk3/dbts/stage/db82_.patch_storage.zip -d /test/db/tech_st/10.2.0/
Thread exiting ..AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
AutoConfig is exiting with status 0
Pls check NO ERROR found -
X64 Oracle 11g R2 Install On i7 3770 Windows 7 x64 Enterprise System Fails
x64 Oracle 11gR2 installation on my new Windows 7 x64 Enterprise system fails after the "Desktop/Server Class" screen. I click Next, and then nothing happens. The install app closes and no installation logs are available. I checked the Windows logs and there is nothing obvious.
My new system has an Intel i7 3770 cpu with 32GB of ram. My old system had twin Intel Xeon EM64T cpus with 3GB of ram. Both systems ran Windows 7 x64 Enterprise. x64 Oracle 11gR2 installed and ran fine on the old system, but the old system started making "funny" noises and had to be replaced.
This is my personal system, not a commercial installation. I got Win 7 x64 Enterprise from my community college, which is a Microsoft Partner. I need Oracle for my relational database classes.
The story so far:
1. I downloaded win64_11gR2_database_1of2 and win64_11gR2_database_2of2 and unpacked both of them into a folder named win64_11gR2_database_install, replacing as necessary.
2. I set up a loopback adapter and added the following entry to c:\Windows\System32\drivers\etc\hosts:
10.10.10.10 localhost PaulK-PC # Loopback Adapter for Oracle 11gR2 Install
3. After creating the loopback adapter, I restarted my PC. I can ping the adapter with no problems.
4. I ran c:\Users\PaulK\Downloads\Oracle\win64_11gR2_database_install\database\setup.exe as Administrator.
5. I skipped email notification, since I don't have a support agreement.
6. I select "Create and configure a database".
7. Whether I select Desktop Class or Server Class, when I click Next, the installation app dies.
Page 2-2 of Oracle Database Installation Guide 11g Release 2 (11.2) for Windows E24186-01 states that an x64 installation of Oracle requires an AMD64 or EM64T cpu. Does this mean I need to install the x86 version of Oracle 11gR2, or is there some other problem?
Suggestions?
Thanks.And Part II:
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.DatabaseChecks updateAccountStatus
CONFIG: SYSMAN password modified
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.DatabaseChecks updateAccountStatus
CONFIG: Unlocked SYSMAN account
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: orcl
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emoms.properties.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml has been copied to E:\app\PaulK\product\11.2.0\dbhome_1\sysman\emd\targets.xml.emca.tmp
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil isHASInstalled
CONFIG: isHAInstalled: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 agentHome: null isCentral: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 isDBC: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: orcl Host: localhost Node: null OH: E:\app\PaulK\product\11.2.0\dbhome_1 isDBC: false
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to E:\app\PaulK\product\11.2.0\dbhome_1\oui
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [E:\app\PaulK\product\11.2.0\dbhome_1]
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME E:\app\PaulK\product\11.2.0\dbhome_1
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from E:\app\PaulK\product\11.2.0\dbhome_1\oc4j\j2ee\OC4J_DBConsole
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from E:\app\PaulK\product\11.2.0\dbhome_1\sysman\config\emd.properties
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file E:\app\PaulK\product\11.2.0\dbhome_1\install\staticports.ini
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: E:\app\PaulK\product\11.2.0\dbhome_1:localhost:null:orcl:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_localhost value: 3938
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_localhost value: 1158
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_localhost value: 5540
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_localhost.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_localhost value: 5520
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for Node: localhost : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMDBPreConfig copyAgentTimeStampFile
CONFIG: File: E:\app\PaulK\product\11.2.0\dbhome_1\localhost_orcl\sysman\emd\agntstmp.txt:localhost does not exists.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Successfully unlocked relevant accounts
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYS
Apr 24, 2013 5:51:55 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Finished executing emreposoutofbox.sql
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Submitting dbms job: E:\app\PaulK\product\11.2.0\dbhome_1\sysman\admin\emdrep\sql\core\latest\admin\admin_submit_dbms_jobs.sql
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.EMReposConfig createOutOfBoxJobs
CONFIG: Successfully submitted dbms job
Apr 24, 2013 5:51:59 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: connectDesc : (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=orcl)))
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager getHost
CONFIG: Host having instnces running for database orcl : localhost
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: REP_DB_RUNNING_HOST value: localhost
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager getRepDbPort
CONFIG: Listener Port: 1521
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
CONFIG: isLocalConnectionRequired: true
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine connecting with SID: orcl, oracleHome: E:\app\PaulK\product\11.2.0\dbhome_1, and user: SYSMAN
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
CONFIG: SQLEngine created successfully and connected
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
Refer to the log file at E:\app\PaulK\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
Apr 24, 2013 5:52:00 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to E:\app\PaulK\product\11.2.0\dbhome_1\oui -
Hello,
Title pretty much states it all. I initially set out (as part of a Security Forensics initiative) to identify the most recently installed applications, modified files, and registry key changes using PowerShell. I attempted to pull this information and sort
them by date installed/last modified, but it was brought to my attention this information isn't always present and can be modified - so it's not accurate.
At that time it was suggested we use Group Policy auditing for Registry and File System - but I'm not sure how I'm going to use/pull these in PowerShell? This will be used on remote host all over the world so local physical access isn't an option.
My question is:
Once Group Policy Auditing for Registry and File System has been enabled, how would I go about pulling those audit logs for review once a system has been identified as compromised? I'm brand new to this GP Auditing (we have a separate team for that) so feel
free to take it from the beginning. :)
Thanks in advance!Hi,
Here are a few suggestions for you:
Ensure Remote Registry service is started on local and remote machines.
Add the – Credential option and supply administrative credentials within the command.
More information for you:
Get-Eventlog doesn't work against Vista/W7 clients
https://social.technet.microsoft.com/Forums/en-US/c5185a01-b0d2-49a7-9aa7-52e6534ada04/geteventlog-doesnt-work-against-vistaw7-clients?forum=winserverpowershell
PowerShell - How to Get XML EventData - Remote Eventlogs - Exchange Events
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/382b10c9-d740-46b1-b81c-b24de911eb14/powershell-how-to-get-xml-eventdata-remote-eventlogs-exchange-events-?forum=ITCG
Powershell script to gather failed logon attempts by event id and type from the security events log
https://social.technet.microsoft.com/Forums/scriptcenter/es-ES/00a62492-c63a-4c8b-92f9-1cc857223a00/powershell-script-to-gather-failed-logon-attempts-by-event-id-and-type-from-the-security-events-log?forum=ITCG
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Maybe you are looking for
-
Okkk sooo.... How can I copy the music from my old ipod to my new 30GB???
I just received my 30 GB ipod and I would like to put all my old songs from my ipod nano onto the ipod, before I start putting new songs on the new one!!! =] Is that possible??? I tried dragging the music folder and stuff like that to my my ipod but
-
HT201272 I can only see a sync symbol next to my music purchases but cannot download them??
Hi, I cannot redownload my past music purchaces from itunes - I can see them but they are greyed out and cannot/will not sync
-
Hi Experts, Can anyone tell how to refresh the events ("SUBMIT") in visual composer.Where to set or see the event settings?? roshini
-
Moving location of original file
I have a referenced library as I am sharing photos on a server between multiple computers (Mac and PC's). I need to change how a couple of folders are organized on that server. However, I don't want to break the reference to those files in iPhoto. Ho
-
After release upgrade to 5.0 I get dumps when I try to access the contents of a table in SM30. The new system is unicode. I have heard, that SM30 does not work in unicode systems. Is that true ? Which transaction should be used then ?