Zooming in/out while selecting parts of the audio file?

The company I am with use Cool Edit 2000 for our audio editing, in Cool Edit it allows you to click and drag to select parts of files while you are doing this you can use the mouse wheel to zoom in and out. This helps for when you need to zoom in at the beginning of the sound and drag to the beginning of the file to delete any unwanted sound or lack of sound, zooming out while doing this allows you to do it very quickly.
I have tried the trial version of Adobe Audition 3 and I was not able to do this.
My questions are:
1. Was this feature removed?
2. If not how do I enable this feature.
This feature will determine weather or not my company will purchase this software. Thanks for the time to answer my questions.

zooming isn't a problem its zooming out while dragging over the file to select it, basically what I am doing is zooming into the beginning or end of a file selecting the precise beginning or ending holding the left mouse button and dragging left or right while I am doing this I am zooming out to make it select what I need faster and deleting those areas away.
I just read about the top/tails view, I am going to check it out see if this helps.

Similar Messages

  • Dim all but a selected part of the movie

    I'd like to draw attention to a certain (rectangular) part of the screen.
    Is it possible to dim all but a selected part of the screen?
    Thanks

    Very simple.
    Duplicate the clip and put it on V2 above the original clip on V1.
    Apply a colour correction filter or blur to the clip on V1.
    Load the V2 clip into the Viewer and using the motion tab crop out the rectangle.
    This will work a treat assuming the shots are static.
    Message was edited by: Dynamicworm

  • Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

    Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

    Thanks. Beforehand, I was double clicking on the multicam clip and forced to make a marker on either the Cam A or B. I realize now that I can do it in the Event Browser. THANK YOU.
    Considering I may create >20 markers per clips for around 10 different interviews, I wish there was a way to bring the Event Brower to the bottom half of the FCPX windows, to resemble the screen orientation when I'm working in an actual project (one could do this in iMovie), and this way the markers could be listed to the left without having all the other event clips around it. Is that clear? Is that possible?

  • I am Creative Cloud member. CC keeps on signing me out while I'm in the middle of working and I have

    I am Creative Cloud member. CC keeps on signing me out while I'm in the middle of working and I have to repeatedly sign back in. This is occurring with more and more frequency. Please help.

    Ncpolicywatch can you please try the steps listed in You are no longer signed into your Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html.  If you an update this discussion with your results it would be appreciated.

  • Hi,  I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on. But I zoom in.the waveform was not ended at Zero point. Why?  In the audio file editork, "Snap Edits to Zero Crossings" option works fine.

    Hi,
    I trimmed an audio regin in the audio track edior with "Snap Edits to Zero Crossings" on.
    But I zoom in、the waveform was not ended at Zero point.
    Why?
    In the audio file editork, "Snap Edits to Zero Crossings" option works fine.

    correction needs to be made to step #14, I typed:
    14) Point to the start or end one of the clips, when you see the icon showing arrows going either way, right click and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection start and endpoints.
    Here is the correction, THE CORRECTED PARTS ARE CAPITALIZED:
    14) Point to the start or end OF one of the clips, when you see the icon showing arrows going either way, LEFT-CLICK and drag your clips to roughly match up with the timeline selection, then zoom in further and adjust the clip start and end points to match up exactly with the timeline selection's start and end points.
    Another Correction:
    Originally read:
    Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. You must then go back to MT view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit.
    Here is the the correction, CORRECTED PARTS ARE CAPITALIZED:
    Addendum: IF you have 2 files selected and click "Edit" to go to Edit view, it will give you the file of the clip you selected first, not 2nd. IF YOU WANT TO EDIT THE 2ND FILE YOU SELECTED IN MULTI-TRACK VIEW, You must go back to Multi-track view, de-select the clip you selected first, then de-select the clip you want to edit, then RE-select the clip you want to edit, THEN CLICK "EDIT" TO GO TO EDIT VIEW.

  • HT204387 My Iphone 4S will not allow me to answer incoming calls on any bluetooth headset without selecting it from the audio source menu.

    My Iphone 4S will not allow me to answer incoming calls on any bluetooth headset without selecting it from the audio source menu.The connection works because once I do select the device...I can hear and speak. Any ideas?

    Thank you templeton peck, I just rang them, turns out my contract doesn't allow it!

  • How do I stop breaks or stutters in the audio file from occurring while editing?

    I am using Captivate 8 but I saw this same problem in Cap7. My narrator recorded the audio while recording the video. He did not record to each slide independently, but instead allowed the software to break the narration at mouse clicks. As the editor, I am cleaning up the audio/video and every time I try to edit the audio it causes a stutter (a small silent section) at some other point in the audio file.
    For Example: The mouse click occurred in the middle of a word, I re-position this frame break, a small gap is created in the middle of a word someplace else in the audio.
    Any editing, even something as simple as changing the volume of the project through the Audio>Edit>Project option, can cause one or more of these brief silences somewhere in the audio. I have tried inserting silence before re-positioning a frame break, but that doesn't solve the problem. Any suggestions would be greatly appreciated. This is taking 10 times longer than it should to do some simple editing.
    Thank you!!

    In other blogs some mentioned a little tool that stops the video when u go to other pages but it doesn't on Android as the mentioned here

  • Itunes wont inport anythig it show listings but comes up with error ocurred while converting (song title ) the required file cannot be found using windows 8

    itunes wont inport anythig it show listings but comes up with error ocurred while converting (song title ) the required file cannot be found using windows 8

    iTunes cannot convert protected WMA tracks. There may also be problems if it can't get full access permissions. What exactly are you trying to do when the error occurs?
    tt2

  • Out of memory message in the audio window

    i finally updated my studio software from logic6 whilst still using the protools HD 192 interface.
    i updated the OS to leopard and installed logic 7 and updated the software for everything.(atmosphere,bfd,stylus,autotune etc).
    not only did many of the apps not work (after downloading all their relevant updates)but when i recorded audio no waveform appeared.
    however reloading the session DID make the waveform reappear.
    in the audio window the audio file had no location but a message saying 'out of memory'.
    hitting 'refresh overview' after recording helped but ultimately does not fix the issue.(also the system stutters when 'dropping in'on a recording)
    i then bought the logic 8 upgrade hoping it would magically resolve the issue and..same problem.grrr.
    protools 8 ,on the other hand,works like a dream.(additionally all the apps mentioned above work smoothly too).
    what am i missing?

    my friend figured the 'out of memory' problem was caused by running protools' latest version on the same drive as both logic 7 and logic 8.
    he de-installed protools and re-installed and previous older protools version and the 'out of memory' issue (plus no visible waveform) in logic 7 and 8 was corrected.
    do apple and digidesign grow ever further apart or is it a question of catch up for one or both?

  • CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!?  HELLL

    CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!?  HELLLLLPPPPP!!!!

    We can not see your computer, your settings or even know what your source files are because we are not in the same room as you are!
    We cant see what you are doing wrong ...so you will have to tell us a lot more and show us some screen grabs of your settings.

  • I have Prem. Elements 12.  I am trying to add audio media.  I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not.  In one case, when I opened a particular

    I have Prem. Elements 12.  I am trying to add audio media.  I know where the audio files are located (using GET INFO while in iTunes), and when I try to add certain audio files, some are accepted and some are not.  In one case, when I opened a particular folder, the song was not listed, even tho' the song is there when using Windows Explorer.  This happens with mp3 and mp4 and just wav files.  Some audio are accepted, most are not.  I get that codec is not installed error message, too.

    Perhaps it would be helpful for you to view the page source code of this page
    http://www.alanwork.com/
    As you can see, the submenu code links are immediately below the top level code, and are
    wrapped in their own  <UL> </UL> tag pairs.
    Hope that helps

  • When i try to open logic x i get a message sayingLogic Pro X unexpectedly quit while trying to use the Audio Unit "Kontakt 4" by "Native Instruments". This plug-in may require an update. how can i fix that?

    when i try to open logic x i get a message sayingLogic Pro X unexpectedly quit while trying to use the Audio Unit “Kontakt 4” by “Native Instruments”. This plug-in may require an update. how can i fix that?

    Update the plugin or delete it. 
    Kontakt 4 is a 32 bit plugin, it won't run in Logic Pro X
    You need Kontakt 5

  • Ihave tons of music on itunes , but everytime i try to select it says "the original file cannot be found, would you like to try and locate it" i have no idea what happened to all of my music  any tips? i have a dell windows vista..  thanks !

    I have tons of music on itunes , but everytime i try to select it says "the original file cannot be found, would you like to try and locate it" i have no idea what happened to all of my music  any tips? i have a dell windows vista..  thanks !

    Basically, the computer thinks the music is 'lost'. Follow the prompts and try to locate it. It should navigate to the files and redraw the links which should make that pop up go away

  • The audio file is not recognized by Logic. Can't import audio files?

    Hi,
    The audio files are on my desktop. Logic 9.1.1 will not recognize them and gives me this message when I try to drag and drop OR Import Audio File OR use Audio Bin.
    As far as I know, I am using wave files (extension .wav). So what could be the problem. Here's a picture of how the files look on my desktop.
    The regular silver and blue iTunes icons look like this when I Get Info:
    The black iTunes icons look like this when I Get Info:
    Importantly, the black iTunes (only 2 out of the 18 audio files) are the ones that actually import. Does it have something to do with the fact that it shows under "More Info > Audio Channels 1" vs. the silver and blue iTunes .wav files (which do NOT have this)?
    Furthermore, here is the process I used to get the audio files in the first place. On my PC, I exported audio files from my Ableton Live project onto a thumbdrive. I copied the audio files from my thumbdrive to my Mac. Maybe this had something to do with it.
    Also, as you can see, under Sharing and Permissions > there is only "read and write" for all names, so it's not a permissions thing.
    Thanks.

    Thanks for your reply.
    +Can you play them as Preview (select in Finder, hit spacebar)?+ No. The black iTunes icons play with no sound and the silver and blue iTunes icons do not even come up in Preview at all.
    +Will iTunes play them?+ Only the black iTunes files (2 out of the 18). When I click on a silver and blue icon'd file, it will not even open in iTunes.
    why on the desktop? it was just a temporary thing. I was not able to pull them into my Audio Bin. I tried what you suggested. I put the files in the Audio Files folder of my project. When I go to open them from within Logic by Import Audio File, they are visible but greyed out. I don't use the desktop except for testing stuff like you do.
    +How was the thumb drive formatted? FAT32 or other DOS-format, or Mac OS Extended (HFS)?
    +the extension is not where apps look to recognize an audio file format, it is the header data. Some audio programs can read RAW audio files, but more about that after your reply to this one.+ It is formatted MS-DOS (FAT 32).
    (*I wrote all this stuff above while I was working and waiting for the PC to write to my thumbdrive again*******finally I got everything to show up.
    I loaded the files again from the thumbdrive. This time they were all in the black iTunes format, and I put them directly in the Audio Files folder like you suggested. After some doing everything works fine. Weird.
    Thanks!

  • I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

    I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

Maybe you are looking for