Zsh: command not found: wifi-menu

I'm trying to connect to wireless during setup but I keep getting the error: zsh: command not found: wifi-menu

I think so... but I don't really know for sure. I am fairly certain it was just an oversight this month. Interestingly, all the other things that netctl depend on are in there... just not netctl itself. Go to the wireless page of the wiki and there are step by step instructions there (you just have to scroll past all the vendor specific info). In short, you use wpa_passphrase to generate a wpa_supplicant.conf and then use wpa_supplicant to associate, then use dhcpcd (or dhclient) to get an IP address. It is pretty simple once you do it once or twice.

Similar Messages

Zsh: command not found?

I've had some issues getting terminal to work after some problems a while back. You can read more on my issues in this post.
http://discussions.apple.com/thread.jspa?messageID=3905356?
The error message is "zsh: command not found: wget" What does this mean?
I've been unable to dig up any information online about the error message I get when attempting to use fink and wget. What has happened and how can I fix it?
I'm attempting to use wget and I know it has been installed properly but I'm not able to start it. What should I do to fix this problem?

There are four unix shells that come with OS X. One of them is zsh. In 10.3 and 10.4, the default shell is bash. Prior to that it was tcsh. (ksh is also present).
Is it possible that you used to use bash and switched somehow to zsh?
If you want to switch to bash, just issue
chsh -s /bin/bash
If you want to switch to tcsh, just issue
chsh -s /bin/tcsh
If you are ok using zsh, then you want to make sure that you have zsh configured the way you want to. We can help you do that too, (or help with whichever shell you are most comfortable using).
If you installed wget with fink, you just need to issue the command
/sw/bin/init.sh
if you are using bash or zsh, and issue
/sw/bin/init.csh
if you are using tcsh.
If you installed wget into /usr/local/bin, then you need to add that to your $PATH.

Bmon -o format, command not found, help!

Hi,
I'm looking for something as simple as it can be, with one-line conky-like output like
dl: 150kpbs ul: 60kbps
- that's all I need.
EDIT:
I'm trying to achieve something with bmon, however I keep getting errors
bmon -p wlan0 -o format:fmt="$(item:name)\n"
zsh: command not found: item:name
Last edited by vi3dr0 (2009-12-04 18:53:58)

The tag $(item:name) is caught by zsh, it tries to interpret it as a command substitution and complains about not having such a command (of course). You should protect it from zsh with simple quotes to let it interpret by bmon:
bmon -p wlan0 -o 'format:fmt=$(item:name)\n'
Actually for download and upload rates you have to write 'attr:rxrate:bytes' and 'attr:txrate:bytes' instead of 'item:name', respectively.
In this case you always get bps, so if you would like it to be in kbps, you should catch the output and divide it by 1024. (Possibly some scripting is needed.)

[SOLVED] lirc: command not found

Hello everyone,
I have an old MCE remote that i'd like to make use of. I've been trying to follow the archwiki, everything is good I installed LIRC and LIRC-utils, loaded lirc_mceusb, except for the part where I'm supposed to execute lirc for some reason I get an invalid command error even thought its installed. Am I missing something here?
archuser@archws ~ % lirc <12:32>
zsh: correct 'lirc' to 'lircd' [nyae]? n
zsh: command not found: lirc
Last edited by aluser (2011-02-26 04:22:25)

The mceusb module ships with the kernel now, so the lirc package is no longer necessary. Simple initial setup:
Install lirc-utils
Copy /usr/share/lirc/remotes/mceusb/lircd.conf.mceusb to /etc/lirc/lircd.conf
Edit /etc/rc.conf and add mceusb to the MODULES array and lircd to the DAEMONS array
Edit /etc/rc.local and add
/usr/bin/ir-keytable -p lirc
Create ~/.lircrc and edit as required
Reboot
If double keystrokes are the problem now and you have a dib0700-based dvb card installed then create /etc/modprobe.d/dvb-usb.conf containing
options dvb_usb disable_rc_polling=1
I've got a model 1039 with the colour buttons and it works fine:
$ irw
000000037ff07be8 00 Record mceusb
000000037ff07be8 01 Record mceusb
000000037ff07be9 00 Play mceusb
000000037ff07be9 01 Play mceusb
000000037ff07beb 00 Forward mceusb
000000037ff07beb 01 Forward mceusb
000000037ff07beb 02 Forward mceusb
000000037ff07bdd 00 OK mceusb
000000037ff07bdd 01 OK mceusb
000000037ff07bdd 02 OK mceusb
000000037ff07be0 00 Down mceusb
000000037ff07be0 01 Down mceusb
Edit: Missed a step.
Edit: Missed a hardware-specific step.
Last edited by azleifel (2011-02-15 21:02:56)

[SOLVED] node package manager: command not found

I installed nodejs, and it was working fine. I updated a couple of days ago, and now npm install and npm lead to
zsh: command not found
Node has some naming conflicts, from what I have read. I am confused as to how the namespace for packages works, but hopefully someone can point me in the right direction with this because, while confusing, I don't think it is causing the problem. I usually execute the application as node, but it is in the repositories as nodejs. I found node in /usr/bin. I can execute npm there, but it advises that npm should be run in a normal shell with a different directory, not in /usr/bin. There was no nodejs or npm.
I removed nodejs using
pacman -Rdd nodejs
since adom has dependencies, but when I tried to reinstall using
pacman -S nodejs
, it said it was up to date and reinstalled. I updated my system and rebooted. I still can execute node but not the npm-it still returns
zsh: command not found: npm
I have no idea why the node package manager disappearred. I also have no idea why it would not have reinstalled with nodejs from the repo.
➜ ~ sudo pacman -Rdd node
[sudo] password for user:
error: target not found: node
➜ ~ nodejs npm
zsh: command not found: nodejs
➜ ~ node npm
module.js:338
throw err;
^
Error: Cannot find module '/home/user/npm'
at Function.Module._resolveFilename (module.js:336:15)
at Function.Module._load (module.js:278:25)
at Function.Module.runMain (module.js:501:10)
at startup (node.js:129:16)
at node.js:814:3
Last edited by 01010101 (2015-06-17 17:40:33)

➜ ~ pkgfile npm
zsh: command not found: pkgfile
➜ ~ sudo pacman -S pkgfile
resolving dependencies...
looking for inter-conflicts...
Packages (1): pkgfile-15-1
Total Download Size: 0.02 MiB
Total Installed Size: 0.05 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
pkgfile-15-1-x86_64 21.6 KiB 323K/s 00:00 [######################] 100%
(1/1) checking keys in keyring [######################] 100%
(1/1) checking package integrity [######################] 100%
(1/1) loading package files [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) checking available disk space [######################] 100%
(1/1) installing pkgfile [######################] 100%
==> Run 'pkgfile --update' to initialize the database
➜ ~ pkgfile npm
error: No repo files found. Please run `pkgfile --update'.
➜ ~ pkgfile --update
error: unable to write to /var/cache/pkgfile: Permission denied
➜ ~ sudo pkgfile --update
:: Updating 4 repos...
download complete: multilib [ 224.2 KiB 372K/s 3 remaining]
download complete: core [ 608.8 KiB 536K/s 2 remaining]
download complete: extra [ 6.9 MiB 2038K/s 1 remaining]
download complete: community [ 10.9 MiB 2.55M/s 0 remaining]
:: download complete in 4.26s < 18.6 MiB 4.37M/s 4 files >
:: waiting for 1 process to finish repacking repos...
➜ ~ pkgfile npm
community/npm
➜ ~ cd development/anj
➜ anj ls
app.js bin bower.json package.json public routes views
➜ anj npm install
zsh: command not found: npm

[SOLVED] Command Not Found

I feel like this is some stupid error I am overlooking, but after searching I cannot figure out why the command is not found.
$ dmenu-with-yeganesh
zsh: command not found: dmenu-with-yeganesh
$ echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/core_perl:~/.xmonad/bin
$ ls -Alh ~/.xmonad/bin
total 4.0K
-rwxr-xr-x 1 name name 268 Jun 20 13:24 dmenu-with-yeganesh
Last edited by chetjan (2014-06-20 21:04:45)

The "~/.xmonad/bin" part in the $PATH is wrong. It should have been expanded to /home/$USER/.xmonad/bin; probably because you quoted the tilda in your .zshrc.

Frmcmp: command not found in EBS 12.1.1 (Os- RHL 5.4)

Hi All,
Could you please help me how i can resolve the below issue. Lots of post already given for this issue and i checked them, but none of them help me to resolve that.
Issue - at the time of compilation of custom form , it's showing 'frmcmp.sh not foud'.
My steps to compile the custom forms ( EBS Version - 12.1.1 , Linux - 5.5)
. /home/ebs/oracle/apps/apps_st/appl/VIS_rana.env
FORMS60_PATH=/home/ebs/oracle/apps/apps_st/appl/au/12.0.0/forms/US:/home/ebs/oracle/apps/apps_st/appl/au/12.0.0/resource:/home/ebs/oracle/apps/apps_st/appl/au/12.0.0/resource/stub:/home/ebs/oracle/apps/apps_st/appl/au/12.0.0/forms/US
frmcmp module=/home/ebs/oracle/apps/apps_st/appl/xxerp/12.0.0/forms/US/DEMO.fmb userid=apps/apps output_file=/home/ebs/oracle/apps/apps_st/appl/xxerp/12.0.0/forms/US/DEMO.fmx compile_all=special batch=yes
-bash: frmcmp: command not found
Please see the below command also- find . -name "frmcmp.sh"
-rwxr-xr-x 1 oracle dba 2438 Apr 9 05:26 frmcmp.sh
and relateds are
-rwxr-xr-x 1 oracle dba 2414 Apr 9 05:26 frmcmp_batch.sh
-rwxr-xr-x 1 oracle dba 6357858 Apr 9 05:26 frmcmp_batch
-rwxr-xr-x 1 oracle dba 5731234 Apr 9 05:26 frmcmp
[oracle@rana bin]$ pwd
/home/ebs/oracle/apps/tech_st/10.1.2/bin
all the frmcmp* files are stored in /home/ebs/oracle/apps/tech_st/10.1.2/bin
Waiting for your response.
Thanks in advance.

FORMS60_PATH=/home/ebs/oracle/apps/apps_st/appl/au/12.0.0/forms/US:/home/ebs/oracle/apps/apps_st/appl/au/12.0.0/resource:/home/ebs/oracle/apps/apps_st/appl/au/12.0.0/resource/stub:/home/ebs/oracle/apps/apps_st/appl/au/12.0.0/forms/USFor R12, you need to make sure that FORMS_PATH is set (FORMS60_PATH is used in 11i only). Sourcing the env file should be enough and you do not need to set FORMS_PATH after you source the application env file.
frmcmp module=/home/ebs/oracle/apps/apps_st/appl/xxerp/12.0.0/forms/US/DEMO.fmb userid=apps/apps output_file=/home/ebs/oracle/apps/apps_st/appl/xxerp/12.0.0/forms/US/DEMO.fmx compile_all=special batch=yes
-bash: frmcmp: command not found
Please see the below command also- find . -name "frmcmp.sh"
-rwxr-xr-x 1 oracle dba 2438 Apr 9 05:26 frmcmp.sh
and relateds are
-rwxr-xr-x 1 oracle dba 2414 Apr 9 05:26 frmcmp_batch.sh
-rwxr-xr-x 1 oracle dba 6357858 Apr 9 05:26 frmcmp_batch
-rwxr-xr-x 1 oracle dba 5731234 Apr 9 05:26 frmcmp
[oracle@rana bin]$ pwd
/home/ebs/oracle/apps/tech_st/10.1.2/bin
all the frmcmp* files are stored in /home/ebs/oracle/apps/tech_st/10.1.2/bin
Waiting for your response.Please use "frmcmp_batch" instead of frmcmp.
R12: How to Compile a Form in Release 12 [ID 1085928.1
How to Generate Form, Library and Menu for Oracle Applications (11i and R12) [ID 130686.1]
Thanks,
Hussein

Export: command not found

I have been trying to install something via MacPorts and was following a blog that described setting the PATH appropriately so that the port command would work, however when I updated .bash_profile as described in the blog and tried to source it, it gives me the error, "export: command not found."
currently echo $PATH returns: /Library/Frameworks/Python.framework/Versions/2.7/bin:/usr/bin:/bin:/usr/sbin:/ sbin:/usr/local/bin:/usr/X11/bin
Any thoughts on how to proceed?

Please post the actual code.
Also are you sure you are using the 'bash' shell (or sh, ksh, zsh shells)? With all these shells 'export' is a built-in command and should never be "not found".
Could you be using the csh or tcsh shell? If you are using one of these shells, then setting environment variables is done using the 'setenv' command, which is also a csh/tcsh built-in.
Use the following command to see what your default shell is:
dscl . -read $HOME shell
If you have csh or tcsh as your shell, then use something like the following to set your PATH environment variable:
setenv PATH "$PATH:/the/stuff/you/are/adding"

Obant "command not found"

Hello,
I just installed BPEL 10.1.2
The BPEL Console and the JDeveloper work fine but when in try to deploy a sample
process like:
D:\Oracle\OraBpel\integration\orabpel\samples\demos\LoanDemoPlus\LoanFlowPlus>obant
i get command not found.
Whats the problem here?
Thanks,
Jochen

Could be that obant isn't on your path. Start a command prompt using "Developer Prompt" from the "Program Files" menu. This initialises the environment for you.

I want to disable 'Spotlight' for repairing my disk "Macintosh HD" , but somehow the command 'sudo mdutil -a -i off' does not work in 'Terminal'. I get result as ' bash: sudo: command not found' .I am using OS 10.10. Please help.

I want to disable 'Spotlight' for repairing my disk "Macintosh HD" , but somehow the command 'sudo mdutil -a -i off' does not work in 'Terminal'. I get result as ' bash: sudo: command not found' .I am using OS 10.10. Please help.

It appears that you may not have a properly installed OS X system.
You must be connected to the Internet to reinstall OS X.
In the menu bar, choose Apple menu > Restart. Once your Mac restarts (and the gray screen appears), hold down the Command (⌘) and R keys.
Select “Disk Utility,” and then click Continue.
Select your startup disk from the list on the left, and then Repair Disk.
After disk is repaired, select Reinstall OS X, then click Continue.
Follow the onscreen instructions. In the pane where you select a disk, select your current OS X disk

What happened to the "command not found" hook?

Since pkgfile has been split off from pkgtools, the "command not found" hook doesn't work anymore. Has it been removed, or does it need to be configured in some other way now?

pkgfile is now what used to be known as nosr.
The hooks (both for zsh and bash) exist in /usr/share/doc/pkgfile/.
EDIT: that's in the AUR -git package. In the community/ package, they don't exist (as of ver. 1-2).
Last edited by WorMzy (2012-07-20 12:47:57)

Rsync command not found

I am trying to use the following command in the terminal:
+*sudo rsync -a --delete "SOURCE" "DESTINATION"*+
but it's returning the following message:
+*-bash: sudo rsync -a: command not found*+
I have been able to run the command before but now it's not working. Any idea what's going on and how I can fix it? I run this same command on another computer and it works fine as well, this only is happening on my wife's MacBook.
Thanks!

The fact that you got:
-bash: sudo rsync -a: command not found
is a strong indication that 'bash' saw 'sudo rsync -a' as one token and as the command it could not find.
Normally you should see
-bash: command_name: command not found
But in your case, it saw what I would have considered the first 3 tokens as a single command name.
The question is why bash did NOT parse 'sudo' separate from 'rsync' separate from '-a'? But instead treated all 3 as a single token.
Were there any stray quotes (single ' or double ") you forgot to mention? For example:
"sudo rsync -a" --delete "SOURCE" "DESTINATION"
'sudo rsync -a' --delete "SOURCE" "DESTINATION"
sudo rsync -a --delete "SOURCE" "DESTINATION"
Any of these 3 would have generated the error you reported.

/etc/rc.conf: line 62: wlan0: command not found

While Arch Linux starts up, I get this message repeatedly.
/etc/rc.conf: line 62: wlan0: command not found
Everything still ends up working alright (I'm using NetworkManager), but this message is really annoying -- how do I get rid of it?

# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
TIMEZONE="US/Eastern"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=(sky2 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore acpi_cpufreq iwl4965)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="elisrivers"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
# interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
eth0="dhcp"
wlan0 ="dhcp"
INTERFACES=(lo !eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal !network netfs crond alsa cpufreq dhcdbd networkmanager fam)
# End of file

-bash: sudo: command not found

     Hello all,
I have had WAY too many problems with this laptop, and at this point in its miserable little life, I've decided to just wipe the hard drive and start fresh, not caring at all what happens to the files left on there. As previously stated in one of my earlier questions (That was, might I add, never fully answered.), this late 2008 MacBook (aluminum) has a problem where it does not boot up, and just endlessly shows the gray spinning pinwheel. Four months later, that just stops, and now when trying to boot up with my normal startup disk, it brings me right to the Recovery disk and tries to reinstall OS X. I tried, it failed 5 minutes in. So I tried to wipe the hard drive, and it says: Disk Erase failed with the error: Couldn't unmount disk.   I looked it up and I saw that if I went into the Terminal and typed: sudo diskutil unmountDisk /dev/disk0 , it would unmount the disk. But whenever I type that, it says: -bash: sudo: command not found. I have no idea how to fix this, and I would really like to be able to use my laptop again without giving somebody my money to do it for me.
                                             Thanks,
                                                  Luke

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. You may then open App Store, click on the Purchases icon in the toolbar, and re-download any OS X upgrade you purchased except Mavericks. Since Yosemite has been released the App Store may not let you re-download Mavericks, but it will let you download Yosemite.

[SOLVED] bash: $'\302\240grep': command not found [frequent CLI error]

For the past several days I've been getting the following error frequently on the command line:
bash: $'\302\240grep': command not found
I think I'm only getting this error in response to commands that are piped to grep, such as the following:
$ ps -ef | grep xyz
or
$ locate | grep abc
However, I don't think I've gotten the error if I type the same commands as above, but without the space between '|' and 'grep'. And, although the error is frequent, it doesn't happen every time; it is seemingly random.
Anybody else experiencing this? Any idea what might be causing it?
I'm using rxvt-unicode as my terminal.
Jay
Last edited by jt512 (2011-04-06 04:38:56)

anonymous_user wrote:Post your ~/.bashrc
# Check for an interactive session
[ -z "$PS1" ] && return
function timer () {
at -f /home/jay/.timercmd now + $1 min
function cpufs () {
sudo cpufreq-set -c 0 $1 $2
sudo cpufreq-set -c 1 $1 $2
alias ls='ls --color'
alias kc='~/scripts/kc.py'
alias diff='colordiff'
alias s2ram='sudo s2ram -f'
alias grep='grep --color=always'
alias Terminal='Terminal -T Terminal'
alias emacsnw='emacs -nw -f menu-bar-mode'
alias rm='rm -I'
alias lpstd='lp -o "StpQuality=Standard"'
alias paps='paps --paper letter --font="Courier 10"'
alias mp='mplayer'
alias mps='mplayer -softvol-max 600'
alias mysql='$HOME/scripts/mysql'
if [ $TERM = 'linux' -a $SHELL = '/bin/bash' ] ; then
PS1='\033[?17;0;40c[\u@\h \W]\$ '
else PS1='[ \[\e[0;32m\]\u@\h\[\e[m\] \[\e[0;31m\]\W\[\e[m\] \[\e[m\]]\[\e[0;32m\] \$ \[\e[m\]'
fi
eval `dircolors -b`
# Allow tab completion for sudo'ed commands
complete -cf sudo
export PATH=$PATH:~/.local/usr/bin
export EDITOR="vim"
export BROWSER='conkeror:uzbl-browser:firefox'
export GREP_COLOR="1;33"
export LESS_TERMCAP_mb=$'\E[01;31m'
export LESS_TERMCAP_md=$'\E[01;31m'
export LESS_TERMCAP_me=$'\E[0m'
export LESS_TERMCAP_se=$'\E[0m'
export LESS_TERMCAP_so=$'\E[01;44;33m'
export LESS_TERMCAP_ue=$'\E[0m'
export LESS_TERMCAP_us=$'\E[01;32m'
export SWEAVE_STYLEPATH_DEFAULT="TRUE"

Zsh: command not found: wifi-menu

Similar Messages

Maybe you are looking for